Merge tag 'omap-for-v4.16/dt-pt2-v2-signed' of...

Merge tag 'omap-for-v4.16/dt-pt2-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Second set of device tree changes for omaps for v4.16 merge window

This branch mostly configures more hardware support:

- Clean-up dts files to remove leading 0x and 0s from binding notation
  to remove more dtc compiler warnings

- A series of am437x updates for backlight, to fix inverted pad
  pull macro, and to configure power management related OPPs

- Configure n950 and droid 4 command mode LCD panels

- Updates to pandora and gta04 LCD panels

- Add support for am574x-idk

- A series of changes to configure more dra7 related PCIe features

- A series of fixes for am335x-boneblue for WLAN, UARTs and CAN
  configuration

- A series of changes to configure dra7 OPPs and VDD supplies

* tag 'omap-for-v4.16/dt-pt2-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (29 commits)
  Revert "ARM: dts: dra7: Add properties to enable PCIe x2 lane mode"
  ARM: dts: am572x-idk: Add cpu0 vdd supply
  ARM: dts: am571x-idk: Add cpu0 vdd supply
  ARM: dts: dra72-evm-tps65917: Add cpu0 vdd supply
  ARM: dts: dra7-evm: Add cpu0 vdd supply
  ARM: dts: am57xx-beagle-x15-common: Add cpu0 vdd supply
  ARM: dts: dra7: Enable 1.5 GHz operation for the CPU
  ARM: dts: dra7: Add MPU OPP supply node
  ARM: dts: dra7: Add vbb-supply to cpu and additional voltages
  ARM: dts: am335x-boneblue: enable can
  ARM: dts: am335x-boneblue: enable usarts
  ARM: dts: am335x-boneblue: fix wl1835 IRQ pin
  ARM: dts: dra7: Remove deprecated PCI compatible string
  ARM: dts: dra76-evm: Enable x2 PCIe lanes
  ARM: dts: DRA72x: Use PCIe compatible specific to dra72
  ARM: dts: DRA74x: Use PCIe compatible specific to dra74
  ARM: dts: dra7: Add properties to enable PCIe x2 lane mode
  ARM: dts: am57xx: Add support for am574x-idk
  ARM: dts: am43x-epos-evm: Hook dcdc2 as the cpu0-supply
  ARM: dts: am437x-idk-evm: Disable OPP50 for MPU
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm/boot/dts/Makefile

@@ -688,6 +688,7 @@ dtb-$(CONFIG_SOC_DRA7XX) += \
 	am57xx-sbc-am57x.dtb \
 	am572x-idk.dtb \
 	am571x-idk.dtb \
+	am574x-idk.dtb \
 	dra7-evm.dtb \
 	dra72-evm.dtb \
 	dra72-evm-revc.dtb \

arch/arm/boot/dts/am335x-boneblue.dts

@@ -159,6 +159,7 @@ AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3)	/* (D17) uart1_rtsn.I2C2_SCL *
 		>;
 	};
 
+	/* UT0 */
 	uart0_pins: pinmux_uart0_pins {
 		pinctrl-single,pins = <
 			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* (E15) uart0_rxd.uart0_rxd */
@@ -166,6 +167,37 @@ AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* (E16) uart0_txd.uart0_tx
 		>;
 	};
 
+	/* UT1 */
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0)	/* (D16) uart1_rxd.uart1_rxd */
+			AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* (D15) uart1_txd.uart1_txd */
+		>;
+	};
+
+	/* GPS */
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE1)	/* (A17) spi0_sclk.uart2_rxd */
+			AM33XX_IOPAD(0x954, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* (B17) spi0_d0.uart2_txd */
+		>;
+	};
+
+	/* DSM2 */
+	uart4_pins: pinmux_uart4_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6)	/* (T17) gpmc_wait0.uart4_rxd */
+		>;
+	};
+
+	/* UT5 */
+	uart5_pins: pinmux_uart5_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x8C4, PIN_INPUT_PULLUP | MUX_MODE4)	/* (U2) lcd_data9.uart5_rxd */
+			AM33XX_IOPAD(0x8C0, PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* (U1) lcd_data8.uart5_txd */
+		>;
+	};
+
 	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
 			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7)		/* (C15) spi0_cs1.gpio0[6] */
@@ -216,10 +248,19 @@ AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* (M18) mdio_clk.uart3_rts
 	wl18xx_pins: pinmux_wl18xx_pins {
 		pinctrl-single,pins = <
 			AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* (K18) gmii1_txclk.gpio3[9] - WL_EN */
-			AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* (H18) rmii1_refclk.gpio0[29] - WL_IRQ */
+			AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* (K16) gmii1_txd1.gpio0[21] - WL_IRQ */
 			AM33XX_IOPAD(0x930, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* (L18) gmii1_rxclk.gpio3[10] - LS_BUF_EN */
 		>;
 	};
+
+	/* DCAN */
+	dcan1_pins: pinmux_dcan1_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x96c, PIN_INPUT | MUX_MODE2)		/* (E17) uart0_rtsn.dcan1_rx */
+			AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE2)		/* (E18) uart0_ctsn.dcan1_tx */
+			AM33XX_IOPAD(0x940, PIN_OUTPUT | MUX_MODE7)		/* (M16) gmii1_rxd0.gpio2[21] */
+		>;
+	};
 };
 
 &uart0 {
@@ -229,6 +270,34 @@ &uart0 {
 	status = "okay";
 };
 
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins>;
+
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart5_pins>;
+
+	status = "okay";
+};
+
 &usb {
 	status = "okay";
 };
@@ -414,7 +483,7 @@ wlcore: wlcore@2 {
 		compatible = "ti,wl1835";
 		reg = <2>;
 		interrupt-parent = <&gpio0>;
-		interrupts = <29 IRQ_TYPE_EDGE_RISING>;
+		interrupts = <21 IRQ_TYPE_EDGE_RISING>;
 	};
 };
 
@@ -450,6 +519,12 @@ &rtc {
 	clock-names = "ext-clk", "int-clk";
 };
 
+&dcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dcan1_pins>;
+	status = "okay";
+};
+
 &gpio3 {
 	ls_buf_en {
 		gpio-hog;

arch/arm/boot/dts/am33xx.dtsi

@@ -500,7 +500,7 @@ dcan1: can@481d0000 {
 			status = "disabled";
 		};
 
-		mailbox: mailbox@480C8000 {
+		mailbox: mailbox@480c8000 {
 			compatible = "ti,omap4-mailbox";
 			reg = <0x480C8000 0x200>;
 			interrupts = <77>;
@@ -999,7 +999,7 @@ mcasp0: mcasp@48038000 {
 			dma-names = "tx", "rx";
 		};
 
-		mcasp1: mcasp@4803C000 {
+		mcasp1: mcasp@4803c000 {
 			compatible = "ti,am33xx-mcasp-audio";
 			ti,hwmods = "mcasp1";
 			reg = <0x4803C000 0x2000>,

arch/arm/boot/dts/am3517.dtsi

@@ -26,7 +26,7 @@ am35x_otg_hs: am35x_otg_hs@5c040000 {
 			interrupt-names = "mc";
 		};
 
-		davinci_emac: ethernet@0x5c000000 {
+		davinci_emac: ethernet@5c000000 {
 			compatible = "ti,am3517-emac";
 			ti,hwmods = "davinci_emac";
 			status = "disabled";
@@ -41,7 +41,7 @@ davinci_emac: ethernet@0x5c000000 {
 			local-mac-address = [ 00 00 00 00 00 00 ];
 		};
 
-		davinci_mdio: ethernet@0x5c030000 {
+		davinci_mdio: ethernet@5c030000 {
 			compatible = "ti,davinci_mdio";
 			ti,hwmods = "davinci_mdio";
 			status = "disabled";

arch/arm/boot/dts/am4372.dtsi

@@ -329,7 +329,7 @@ uart5: serial@481aa000 {
 			status = "disabled";
 		};
 
-		mailbox: mailbox@480C8000 {
+		mailbox: mailbox@480c8000 {
 			compatible = "ti,omap4-mailbox";
 			reg = <0x480C8000 0x200>;
 			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
@@ -944,7 +944,7 @@ mcasp0: mcasp@48038000 {
 			dma-names = "tx", "rx";
 		};
 
-		mcasp1: mcasp@4803C000 {
+		mcasp1: mcasp@4803c000 {
 			compatible = "ti,am33xx-mcasp-audio";
 			ti,hwmods = "mcasp1";
 			reg = <0x4803C000 0x2000>,

arch/arm/boot/dts/am437x-gp-evm.dts

@@ -55,7 +55,7 @@ vmmcwl_fixed: fixedregulator-mmcwl {
 		enable-active-high;
 	};
 
-	backlight {
+	lcd_bl: backlight {
 		compatible = "pwm-backlight";
 		pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
 		brightness-levels = <0 51 53 56 62 75 101 152 255>;
@@ -86,6 +86,8 @@ lcd0: display {
 		compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
 		label = "lcd";
 
+		backlight = <&lcd_bl>;
+
 		panel-timing {
 			clock-frequency = <33000000>;
 			hactive = <800>;

arch/arm/boot/dts/am437x-idk-evm.dts

@@ -519,3 +519,17 @@ &wdt {
 &cpu {
 	cpu0-supply = <&tps>;
 };
+
+&cpu0_opp_table {
+	/*
+	 * Supply voltage supervisor on board will not allow opp50 so
+	 * disable it and set opp100 as suspend OPP.
+	 */
+	opp50@300000000 {
+		status = "disabled";
+	};
+
+	opp100@600000000 {
+		opp-suspend;
+	};
+};

arch/arm/boot/dts/am437x-sk-evm.dts

@@ -35,7 +35,7 @@ clk_32k_rtc: clk_32k_rtc {
 		clock-frequency = <32768>;
 	};
 
-	backlight {
+	lcd_bl: backlight {
 		compatible = "pwm-backlight";
 		pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
 		brightness-levels = <0 51 53 56 62 75 101 152 255>;
@@ -132,6 +132,8 @@ lcd0: display {
 		pinctrl-names = "default";
 		pinctrl-0 = <&lcd_pins>;
 
+		backlight = <&lcd_bl>;
+
 		enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 
 		panel-timing {

arch/arm/boot/dts/am43x-epos-evm.dts

@@ -48,6 +48,8 @@ lcd0: display {
 		compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
 		label = "lcd";
 
+		backlight = <&lcd_bl>;
+
 		panel-timing {
 			clock-frequency = <33000000>;
 			hactive = <800>;
@@ -107,7 +109,7 @@ &gpio2 18 GPIO_ACTIVE_HIGH		/* Bank2, pin18 */
 			0x03030069>;	/* LEFT */
 	};
 
-	backlight {
+	lcd_bl: backlight {
 		compatible = "pwm-backlight";
 		pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
 		brightness-levels = <0 51 53 56 62 75 101 152 255>;
@@ -989,3 +991,7 @@ &mux_synctimer32k_ck {
 	assigned-clocks = <&mux_synctimer32k_ck>;
 	assigned-clock-parents = <&clkdiv32k_ick>;
 };
+
+&cpu {
+	cpu0-supply = <&dcdc2>;
+};

arch/arm/boot/dts/am571x-idk.dts

@@ -117,3 +117,7 @@ &mmc2 {
 	pinctrl-1 = <&mmc2_pins_hs>;
 	pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
 };
+
+&cpu0 {
+	vdd-supply = <&smps12_reg>;
+};

arch/arm/boot/dts/am572x-idk-common.dtsi

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "am57xx-idk-common.dtsi"
+
+/ {
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+	status-leds {
+		compatible = "gpio-leds";
+		cpu0-led {
+			label = "status0:red:cpu0";
+			gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "cpu0";
+		};
+
+		usr0-led {
+			label = "status0:green:usr";
+			gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		heartbeat-led {
+			label = "status0:blue:heartbeat";
+			gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+
+		cpu1-led {
+			label = "status1:red:cpu1";
+			gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "cpu1";
+		};
+
+		usr1-led {
+			label = "status1:green:usr";
+			gpios = <&gpio7 23 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		mmc0-led {
+			label = "status1:blue:mmc0";
+			gpios = <&gpio7 22 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc0";
+		};
+	};
+};
+
+&omap_dwc3_2 {
+	extcon = <&extcon_usb2>;
+};
+
+&extcon_usb2 {
+	id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+	vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>;
+};
+
+&sn65hvs882 {
+	load-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+};
+
+&pcie1_rc {
+	status = "okay";
+	gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+};
+
+&pcie1_ep {
+	gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+};
+
+&mailbox5 {
+	status = "okay";
+	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+		status = "okay";
+	};
+	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+		status = "okay";
+	};
+};
+
+&mailbox6 {
+	status = "okay";
+	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+		status = "okay";
+	};
+	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+		status = "okay";
+	};
+};

arch/arm/boot/dts/am572x-idk.dts

@@ -9,8 +9,7 @@
 /dts-v1/;
 
 #include "dra74x.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
+#include "am572x-idk-common.dtsi"
 #include "am57xx-idk-common.dtsi"
 #include "dra74x-mmc-iodelay.dtsi"
 
@@ -18,54 +17,6 @@ / {
 	model = "TI AM5728 IDK";
 	compatible = "ti,am5728-idk", "ti,am5728", "ti,dra742", "ti,dra74",
 		     "ti,dra7";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x80000000 0x0 0x80000000>;
-	};
-
-	status-leds {
-		compatible = "gpio-leds";
-		cpu0-led {
-			label = "status0:red:cpu0";
-			gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "cpu0";
-		};
-
-		usr0-led {
-			label = "status0:green:usr";
-			gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		heartbeat-led {
-			label = "status0:blue:heartbeat";
-			gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "heartbeat";
-		};
-
-		cpu1-led {
-			label = "status1:red:cpu1";
-			gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "cpu1";
-		};
-
-		usr1-led {
-			label = "status1:green:usr";
-			gpios = <&gpio7 23 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-
-		mmc0-led {
-			label = "status1:blue:mmc0";
-			gpios = <&gpio7 22 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "mmc0";
-		};
-	};
 };
 
 &mmc1 {
@@ -86,44 +37,6 @@ &mmc2 {
 	pinctrl-2 = <&mmc2_pins_ddr_rev20>;
 };
 
-&omap_dwc3_2 {
-	extcon = <&extcon_usb2>;
-};
-
-&extcon_usb2 {
-	id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
-	vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>;
-};
-
-&sn65hvs882 {
-	load-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
-};
-
-&pcie1_rc {
-	status = "okay";
-	gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
-};
-
-&pcie1_ep {
-	gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
-};
-
-&mailbox5 {
-	status = "okay";
-	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
-		status = "okay";
-	};
-	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
-		status = "okay";
-	};
-};
-
-&mailbox6 {
-	status = "okay";
-	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
-		status = "okay";
-	};
-	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
-		status = "okay";
-	};
+&cpu0 {
+	vdd-supply = <&smps12_reg>;
 };

arch/arm/boot/dts/am574x-idk.dts

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+
+/dts-v1/;
+
+#include "dra76x.dtsi"
+#include "am572x-idk-common.dtsi"
+
+/ {
+	model = "TI AM5748 IDK";
+	compatible = "ti,am5728-idk", "ti,dra762", "ti,dra7";
+};
+
+&qspi {
+	spi-max-frequency = <96000000>;
+	m25p80@0 {
+		spi-max-frequency = <96000000>;
+	};
+};

arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi

@@ -388,7 +388,7 @@ &gpio7 {
 };
 
 &cpu0 {
-	cpu0-supply = <&smps12_reg>;
+	vdd-supply = <&smps12_reg>;
 	voltage-tolerance = <1>;
 };
 

arch/arm/boot/dts/dra62x-j5eco-evm.dts

@@ -74,19 +74,19 @@ partition@0 {
 			label = "X-Loader";
 			reg = <0 0x80000>;
 		};
-		partition@0x80000 {
+		partition@80000 {
 			label = "U-Boot";
 			reg = <0x80000 0x1c0000>;
 		};
-		partition@0x1c0000 {
+		partition@1c0000 {
 			label = "Environment";
 			reg = <0x240000 0x40000>;
 		};
-		partition@0x280000 {
+		partition@280000 {
 			label = "Kernel";
 			reg = <0x280000 0x500000>;
 		};
-		partition@0x780000 {
+		partition@780000 {
 			label = "Filesystem";
 			reg = <0x780000 0xf880000>;
 		};

arch/arm/boot/dts/dra7-evm.dts

@@ -361,7 +361,7 @@ &mmc2 {
 };
 
 &cpu0 {
-	cpu0-supply = <&smps123_reg>;
+	vdd-supply = <&smps123_reg>;
 };
 
 &omap_dwc3_2 {

arch/arm/boot/dts/dra7.dtsi

@@ -93,6 +93,8 @@ cpu0: cpu@0 {
 			cooling-min-level = <0>;
 			cooling-max-level = <2>;
 			#cooling-cells = <2>; /* min followed by max */
+
+			vbb-supply = <&abb_mpu>;
 		};
 	};
 
@@ -102,16 +104,26 @@ cpu0_opp_table: opp-table {
 
 		opp_nom-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <1060000 850000 1150000>;
+			opp-microvolt = <1060000 850000 1150000>,
+					<1060000 850000 1150000>;
 			opp-supported-hw = <0xFF 0x01>;
 			opp-suspend;
 		};
 
 		opp_od-1176000000 {
 			opp-hz = /bits/ 64 <1176000000>;
-			opp-microvolt = <1160000 885000 1160000>;
+			opp-microvolt = <1160000 885000 1160000>,
+					<1160000 885000 1160000>;
+
 			opp-supported-hw = <0xFF 0x02>;
 		};
+
+		opp_high@1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <1210000 950000 1250000>,
+					<1210000 950000 1250000>;
+			opp-supported-hw = <0xFF 0x04>;
+		};
 	};
 
 	/*
@@ -304,7 +316,6 @@ axi@0 {
 			 * node and enable pcie1_ep mode.
 			 */
 			pcie1_rc: pcie@51000000 {
-				compatible = "ti,dra7-pcie";
 				reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>;
 				reg-names = "rc_dbics", "ti_conf", "config";
 				interrupts = <0 232 0x4>, <0 233 0x4>;
@@ -334,7 +345,6 @@ pcie1_intc: interrupt-controller {
 			};
 
 			pcie1_ep: pcie_ep@51000000 {
-				compatible = "ti,dra7-pcie-ep";
 				reg = <0x51000000 0x28>, <0x51002000 0x14c>, <0x51001000 0x28>, <0x1000 0x10000000>;
 				reg-names = "ep_dbics", "ti_conf", "ep_dbics2", "addr_space";
 				interrupts = <0 232 0x4>;
@@ -356,8 +366,7 @@ axi@1 {
 			ranges = <0x51800000 0x51800000 0x3000
 				  0x0	     0x30000000 0x10000000>;
 			status = "disabled";
-			pcie@51800000 {
-				compatible = "ti,dra7-pcie";
+			pcie2_rc: pcie@51800000 {
 				reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>;
 				reg-names = "rc_dbics", "ti_conf", "config";
 				interrupts = <0 355 0x4>, <0 356 0x4>;
@@ -1386,7 +1395,7 @@ ocp2scp@4a090000 {
 			ranges;
 			reg = <0x4a090000 0x20>;
 			ti,hwmods = "ocp2scp3";
-			sata_phy: phy@4A096000 {
+			sata_phy: phy@4a096000 {
 				compatible = "ti,phy-pipe3-sata";
 				reg = <0x4A096000 0x80>, /* phy_rx */
 				      <0x4A096400 0x64>, /* phy_tx */
@@ -2077,6 +2086,19 @@ rng: rng@48090000 {
 			clocks = <&l3_iclk_div>;
 			clock-names = "fck";
 		};
+
+		opp_supply_mpu: opp-supply@4a003b20 {
+			compatible = "ti,omap5-opp-supply";
+			reg = <0x4a003b20 0xc>;
+			ti,efuse-settings = <
+			/* uV   offset */
+			1060000 0x0
+			1160000 0x4
+			1210000 0x8
+			>;
+			ti,absolute-max-voltage-uv = <1500000>;
+		};
+
 	};
 
 	thermal_zones: thermal-zones {

arch/arm/boot/dts/dra72-evm-tps65917.dtsi

@@ -148,3 +148,7 @@ &dss {
 &mmc1 {
 	vqmmc-supply = <&ldo1_reg>;
 };
+
+&cpu0 {
+	vdd-supply = <&smps1_reg>;
+};

arch/arm/boot/dts/dra72x.dtsi

@@ -50,3 +50,15 @@ mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
 		status = "disabled";
 	};
 };
+
+&pcie1_rc {
+	compatible = "ti,dra726-pcie-rc", "ti,dra7-pcie";
+};
+
+&pcie1_ep {
+	compatible = "ti,dra726-pcie-ep", "ti,dra7-pcie-ep";
+};
+
+&pcie2_rc {
+	compatible = "ti,dra726-pcie-rc", "ti,dra7-pcie";
+};

arch/arm/boot/dts/dra74x.dtsi

@@ -124,3 +124,15 @@ mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
 		status = "disabled";
 	};
 };
+
+&pcie1_rc {
+	compatible = "ti,dra746-pcie-rc", "ti,dra7-pcie";
+};
+
+&pcie1_ep {
+	compatible = "ti,dra746-pcie-ep", "ti,dra7-pcie-ep";
+};
+
+&pcie2_rc {
+	compatible = "ti,dra746-pcie-rc", "ti,dra7-pcie";
+};

arch/arm/boot/dts/dra76-evm.dts

@@ -422,3 +422,19 @@ m25p80@0 {
 		spi-max-frequency = <96000000>;
 	};
 };
+
+&pcie2_phy {
+	status = "okay";
+};
+
+&pcie1_rc {
+	num-lanes = <2>;
+	phys = <&pcie1_phy>, <&pcie2_phy>;
+	phy-names = "pcie-phy0", "pcie-phy1";
+};
+
+&pcie1_ep {
+	num-lanes = <2>;
+	phys = <&pcie1_phy>, <&pcie2_phy>;
+	phy-names = "pcie-phy0", "pcie-phy1";
+};

arch/arm/boot/dts/omap3-cm-t3x.dtsi

@@ -306,19 +306,19 @@ partition@0 {
 			label = "xloader";
 			reg = <0 0x80000>;
 		};
-		partition@0x80000 {
+		partition@80000 {
 			label = "uboot";
 			reg = <0x80000 0x1e0000>;
 		};
-		partition@0x260000 {
+		partition@260000 {
 			label = "uboot environment";
 			reg = <0x260000 0x40000>;
 		};
-		partition@0x2a0000 {
+		partition@2a0000 {
 			label = "linux";
 			reg = <0x2a0000 0x400000>;
 		};
-		partition@0x6a0000 {
+		partition@6a0000 {
 			label = "rootfs";
 			reg = <0x6a0000 0x1f880000>;
 		};

arch/arm/boot/dts/omap3-evm-37xx.dts

@@ -90,19 +90,19 @@ partition@0 {
 			label = "X-Loader";
 			reg = <0 0x80000>;
 		};
-		partition@0x80000 {
+		partition@80000 {
 			label = "U-Boot";
 			reg = <0x80000 0x1c0000>;
 		};
-		partition@0x1c0000 {
+		partition@1c0000 {
 			label = "Environment";
 			reg = <0x240000 0x40000>;
 		};
-		partition@0x280000 {
+		partition@280000 {
 			label = "Kernel";
 			reg = <0x280000 0x500000>;
 		};
-		partition@0x780000 {
+		partition@780000 {
 			label = "Filesystem";
 			reg = <0x780000 0x1f880000>;
 		};

arch/arm/boot/dts/omap3-gta04.dtsi

@@ -86,7 +86,7 @@ spi_lcd {
 
 		/* lcd panel */
 		lcd: td028ttec1@0 {
-			compatible = "toppoly,td028ttec1";
+			compatible = "tpo,td028ttec1";
 			reg = <0>;
 			spi-max-frequency = <100000>;
 			spi-cpol;

arch/arm/boot/dts/omap3-lilly-a83x.dtsi

@@ -405,22 +405,22 @@ partition@0 {
 			reg = <0 0x80000>;
 		};
 
-		partition@0x80000 {
+		partition@80000 {
 			label = "u-boot";
 			reg = <0x80000 0x1e0000>;
 		};
 
-		partition@0x260000 {
+		partition@260000 {
 			label = "u-boot-environment";
 			reg = <0x260000 0x20000>;
 		};
 
-		partition@0x280000 {
+		partition@280000 {
 			label = "kernel";
 			reg = <0x280000 0x500000>;
 		};
 
-		partition@0x780000 {
+		partition@780000 {
 			label = "filesystem";
 			reg = <0x780000 0xf880000>;
 		};

arch/arm/boot/dts/omap3-n950.dts

@@ -51,6 +51,26 @@ OMAP3_CORE1_IOPAD(0x2196, PIN_OUTPUT | MUX_MODE1) /* mcspi4_cs0 */
 	};
 };
 
+&omap3_pmx_core {
+	dsi_pins: pinmux_dsi_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE1) /* dsi_dx0 - data0+ */
+			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE1) /* dsi_dy0 - data0- */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE1) /* dsi_dx1 - clk+   */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE1) /* dsi_dy1 - clk-   */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE1) /* dsi_dx2 - data1+ */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE1) /* dsi_dy2 - data1- */
+		>;
+	};
+
+	display_pins: pinmux_display_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20ca, PIN_INPUT | MUX_MODE4) /* gpio 62 - display te */
+			OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE4) /* gpio 87 - display reset */
+		>;
+	};
+};
+
 &i2c2 {
 	smia_1: camera@10 {
 		compatible = "nokia,smia";
@@ -186,3 +206,71 @@ &lis302 {
 	st,max-limit-y = <32>;
 	st,max-limit-z = <32>;
 };
+
+&dss {
+	status = "ok";
+
+	vdda_video-supply = <&vdac>;
+};
+
+&dsi {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dsi_pins>;
+
+	vdd-supply = <&vpll2>;
+
+	port {
+		dsi_out_ep: endpoint {
+			remote-endpoint = <&lcd0_in>;
+			lanes = <2 3 0 1 4 5>;
+		};
+	};
+
+	lcd0: display {
+		compatible = "nokia,himalaya", "panel-dsi-cm";
+		label = "lcd0";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&display_pins>;
+
+		vpnl-supply = <&vmmc2>;
+		vddi-supply = <&vio>;
+
+		reset-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;	/* 87 */
+		te-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;	/* 62 */
+
+		width-mm = <49>; /* 48.960 mm */
+		height-mm = <88>; /* 88.128 mm */
+
+		/* TODO:
+		 * - panel is upside-down
+		 * - top + bottom 5px are not visible
+		 */
+		panel-timing {
+			clock-frequency = <0>;          /* Calculated by dsi */
+
+			hback-porch = <2>;
+			hactive = <480>;
+			hfront-porch = <0>;
+			hsync-len = <2>;
+
+			vback-porch = <1>;
+			vactive = <864>;
+			vfront-porch = <0>;
+			vsync-len = <1>;
+
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+
+		port {
+			lcd0_in: endpoint {
+				remote-endpoint = <&dsi_out_ep>;
+			};
+		};
+	};
+};

arch/arm/boot/dts/omap3-pandora-common.dtsi

@@ -627,7 +627,7 @@ tsc2046@0 {
 
 	lcd: lcd@1 {
 		reg = <1>;	/* CS1 */
-		compatible =	"omapdss,tpo,td043mtea1";
+		compatible =	"tpo,td043mtea1";
 		spi-max-frequency = <100000>;
 		spi-cpol;
 		spi-cpha;

arch/arm/boot/dts/omap4-droid4-xt894.dts

@@ -177,6 +177,10 @@ lcd0: display {
 		vddi-supply = <&lcd_regulator>;
 		reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;	/* gpio101 */
 
+		width-mm = <50>;
+		height-mm = <89>;
+		backlight = <&lcd_backlight>;
+
 		panel-timing {
 			clock-frequency = <0>;		/* Calculated by dsi */
 
@@ -346,7 +350,7 @@ lm3532@38 {
 
 		enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
 
-		backlight {
+		lcd_backlight: backlight {
 			compatible = "ti,lm3532-backlight";
 
 			lcd {

include/dt-bindings/pinctrl/am43xx.h

@@ -25,7 +25,8 @@
 #define DS0_FORCE_OFF_MODE	(1 << 24)
 #define DS0_INPUT		(1 << 25)
 #define DS0_FORCE_OUT_HIGH	(1 << 26)
-#define DS0_PULL_UP_DOWN_EN	(1 << 27)
+#define DS0_PULL_UP_DOWN_EN	(0 << 27)
+#define DS0_PULL_UP_DOWN_DIS	(1 << 27)
 #define DS0_PULL_UP_SEL		(1 << 28)
 #define WAKEUP_ENABLE		(1 << 29)