Merge bk://kernel.bkbits.net/gregkh/linux/pci-2.5

into home.transmeta.com:/home/torvalds/v2.5/linux

Makefile

@@ -204,7 +204,7 @@ GENKSYMS	= scripts/genksyms/genksyms
 DEPMOD		= /sbin/depmod
 KALLSYMS	= scripts/kallsyms
 PERL		= perl
-CHECK		= /home/torvalds/parser/check
+CHECK		= sparse
 MODFLAGS	= -DMODULE
 CFLAGS_MODULE   = $(MODFLAGS)
 AFLAGS_MODULE   = $(MODFLAGS)

arch/arm/kernel/pm.c

@@ -11,7 +11,6 @@
 #include <linux/config.h>
 #include <linux/pm.h>
 #include <linux/device.h>
-#include <linux/cpufreq.h>
 
 #include <asm/leds.h>
 #include <asm/system.h>
@@ -66,13 +65,6 @@ int suspend(void)
 	 */
 	device_resume(RESUME_POWER_ON);
 
-	/*
-	 * Restore the CPU frequency settings.
-	 */
-#ifdef CONFIG_CPU_FREQ
-	cpufreq_restore();
-#endif
-
 	/*
 	 * Resume LDM devices.
 	 */

arch/i386/kernel/apic.c

@@ -25,6 +25,9 @@
 #include <linux/interrupt.h>
 #include <linux/mc146818rtc.h>
 #include <linux/kernel_stat.h>
+#include <linux/sysdev.h>
+#include <linux/module.h>
+
 
 #include <asm/atomic.h>
 #include <asm/smp.h>
@@ -460,9 +463,6 @@ void __init setup_local_APIC (void)
 
 #ifdef CONFIG_PM
 
-#include <linux/device.h>
-#include <linux/module.h>
-
 static struct {
 	/* 'active' is true if the local APIC was enabled by us and
 	   not the BIOS; this signifies that we are also responsible
@@ -484,13 +484,11 @@ static struct {
 	unsigned int apic_thmr;
 } apic_pm_state;
 
-static int lapic_suspend(struct device *dev, u32 state, u32 level)
+static int lapic_suspend(struct sys_device *dev, u32 state)
 {
 	unsigned int l, h;
 	unsigned long flags;
 
-	if (level != SUSPEND_POWER_DOWN)
-		return 0;
 	if (!apic_pm_state.active)
 		return 0;
 
@@ -517,13 +515,11 @@ static int lapic_suspend(struct device *dev, u32 state, u32 level)
 	return 0;
 }
 
-static int lapic_resume(struct device *dev, u32 level)
+static int lapic_resume(struct sys_device *dev)
 {
 	unsigned int l, h;
 	unsigned long flags;
 
-	if (level != RESUME_POWER_ON)
-		return 0;
 	if (!apic_pm_state.active)
 		return 0;
 
@@ -557,38 +553,37 @@ static int lapic_resume(struct device *dev, u32 level)
 	return 0;
 }
 
-static struct device_driver lapic_driver = {
-	.name		= "lapic",
-	.bus		= &system_bus_type,
+
+static struct sysdev_class lapic_sysclass = {
+	set_kset_name("lapic"),
 	.resume		= lapic_resume,
 	.suspend	= lapic_suspend,
 };
 
-/* not static, needed by child devices */
-struct sys_device device_lapic = {
-	.name		= "lapic",
-	.id		= 0,
-	.dev		= {
-		.name	= "lapic",
-		.driver	= &lapic_driver,
-	},
+static struct sys_device device_lapic = {
+	.id	= 0,
+	.cls	= &lapic_sysclass,
 };
-EXPORT_SYMBOL(device_lapic);
 
 static void __init apic_pm_activate(void)
 {
 	apic_pm_state.active = 1;
 }
 
-static int __init init_lapic_devicefs(void)
+static int __init init_lapic_sysfs(void)
 {
+	int error;
+
 	if (!cpu_has_apic)
 		return 0;
 	/* XXX: remove suspend/resume procs if !apic_pm_state.active? */
-	driver_register(&lapic_driver);
-	return sys_device_register(&device_lapic);
+
+	error = sysdev_class_register(&lapic_sysclass);
+	if (!error)
+		error = sys_device_register(&device_lapic);
+	return error;
 }
-device_initcall(init_lapic_devicefs);
+device_initcall(init_lapic_sysfs);
 
 #else	/* CONFIG_PM */
 

arch/i386/kernel/cpu/mtrr/main.c

@@ -35,6 +35,7 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/smp.h>
+#include <linux/cpu.h>
 
 #include <asm/mtrr.h>
 
@@ -546,6 +547,58 @@ static void init_other_cpus(void)
 	}
 }
 
+
+struct mtrr_value {
+	mtrr_type	ltype;
+	unsigned long	lbase;
+	unsigned int	lsize;
+};
+
+static struct mtrr_value * mtrr_state;
+
+static int mtrr_save(struct sys_device * sysdev, u32 state)
+{
+	int i;
+	int size = num_var_ranges * sizeof(struct mtrr_value);
+
+	mtrr_state = kmalloc(size,GFP_KERNEL);
+	if (mtrr_state)
+		memset(mtrr_state,0,size);
+	else
+		return -ENOMEM;
+
+	for (i = 0; i < num_var_ranges; i++) {
+		mtrr_if->get(i,
+			     &mtrr_state[i].lbase,
+			     &mtrr_state[i].lsize,
+			     &mtrr_state[i].ltype);
+	}
+	return 0;
+}
+
+static int mtrr_restore(struct sys_device * sysdev)
+{
+	int i;
+
+	for (i = 0; i < num_var_ranges; i++) {
+		if (mtrr_state[i].lsize) 
+			set_mtrr(i,
+				 mtrr_state[i].lbase,
+				 mtrr_state[i].lsize,
+				 mtrr_state[i].ltype);
+	}
+	kfree(mtrr_state);
+	return 0;
+}
+
+
+
+static struct sysdev_driver mtrr_sysdev_driver = {
+	.save		= mtrr_save,
+	.restore	= mtrr_restore,
+};
+
+
 /**
  * mtrr_init - initialie mtrrs on the boot CPU
  *
@@ -630,8 +683,11 @@ static int __init mtrr_init(void)
 		set_num_var_ranges();
 		init_table();
 		init_other_cpus();
+
+		return sysdev_driver_register(&cpu_sysdev_class,
+					      &mtrr_sysdev_driver);
 	}
-	return mtrr_if ? -ENXIO : 0;
+	return -ENXIO;
 }
 
 char *mtrr_strings[MTRR_NUM_TYPES] =
@@ -645,5 +701,5 @@ char *mtrr_strings[MTRR_NUM_TYPES] =
     "write-back",               /* 6 */
 };
 
-core_initcall(mtrr_init);
+subsys_initcall(mtrr_init);
 

arch/i386/kernel/i8259.c

@@ -10,7 +10,7 @@
 #include <linux/smp_lock.h>
 #include <linux/init.h>
 #include <linux/kernel_stat.h>
-#include <linux/device.h>
+#include <linux/sysdev.h>
 
 #include <asm/atomic.h>
 #include <asm/system.h>
@@ -238,35 +238,31 @@ void mask_and_ack_8259A(unsigned int irq)
 	}
 }
 
-static int i8259A_resume(struct device *dev, u32 level)
+static int i8259A_resume(struct sys_device *dev)
 {
-	if (level == RESUME_POWER_ON)
-		init_8259A(0);
+	init_8259A(0);
 	return 0;
 }
 
-static struct device_driver i8259A_driver = {
-	.name		= "pic",
-	.bus		= &system_bus_type,
-	.resume		= i8259A_resume,
+static struct sysdev_class i8259_sysdev_class = {
+	set_kset_name("i8259"),
+	.resume = i8259A_resume,
 };
 
 static struct sys_device device_i8259A = {
-	.name		= "pic",
-	.id		= 0,
-	.dev		= {
-		.name	= "i8259A PIC",
-		.driver	= &i8259A_driver,
-	},
+	.id	= 0,
+	.cls	= &i8259_sysdev_class,
 };
 
-static int __init init_8259A_devicefs(void)
+static int __init i8259A_init_sysfs(void)
 {
-	driver_register(&i8259A_driver);
-	return sys_device_register(&device_i8259A);
+	int error = sysdev_class_register(&i8259_sysdev_class);
+	if (!error)
+		error = sys_device_register(&device_i8259A);
+	return error;
 }
 
-device_initcall(init_8259A_devicefs);
+device_initcall(i8259A_init_sysfs);
 
 void init_8259A(int auto_eoi)
 {
@@ -385,35 +381,31 @@ static void setup_timer(void)
 	spin_unlock_irqrestore(&i8253_lock, flags);
 }
 
-static int timer_resume(struct device *dev, u32 level)
+static int timer_resume(struct sys_device *dev)
 {
-	if (level == RESUME_POWER_ON)
-		setup_timer();
+	setup_timer();
 	return 0;
 }
 
-static struct device_driver timer_driver = {
-	.name		= "timer",
-	.bus		= &system_bus_type,
-	.resume		= timer_resume,
+static struct sysdev_class timer_sysclass = {
+	set_kset_name("timer"),
+	.resume	= timer_resume,
 };
 
 static struct sys_device device_timer = {
-	.name		= "timer",
-	.id		= 0,
-	.dev		= {
-		.name	= "timer",
-		.driver	= &timer_driver,
-	},
+	.id	= 0,
+	.cls	= &timer_sysclass,
 };
 
-static int __init init_timer_devicefs(void)
+static int __init init_timer_sysfs(void)
 {
-	driver_register(&timer_driver);
-	return sys_device_register(&device_timer);
+	int error = sysdev_class_register(&timer_sysclass);
+	if (!error)
+		error = sys_device_register(&device_timer);
+	return error;
 }
 
-device_initcall(init_timer_devicefs);
+device_initcall(init_timer_sysfs);
 
 void __init init_IRQ(void)
 {

arch/i386/kernel/nmi.c

@@ -23,6 +23,7 @@
 #include <linux/mc146818rtc.h>
 #include <linux/kernel_stat.h>
 #include <linux/module.h>
+#include <linux/sysdev.h>
 
 #include <asm/smp.h>
 #include <asm/mtrr.h>
@@ -180,53 +181,48 @@ void enable_lapic_nmi_watchdog(void)
 
 #ifdef CONFIG_PM
 
-#include <linux/device.h>
 static int nmi_pm_active; /* nmi_active before suspend */
 
-static int lapic_nmi_suspend(struct device *dev, u32 state, u32 level)
+static int lapic_nmi_suspend(struct sys_device *dev, u32 state)
 {
-	if (level != SUSPEND_POWER_DOWN)
-		return 0;
 	nmi_pm_active = nmi_active;
 	disable_lapic_nmi_watchdog();
 	return 0;
 }
 
-static int lapic_nmi_resume(struct device *dev, u32 level)
+static int lapic_nmi_resume(struct sys_device *dev)
 {
-	if (level != RESUME_POWER_ON)
-		return 0;
 	if (nmi_pm_active > 0)
 		enable_lapic_nmi_watchdog();
 	return 0;
 }
 
-static struct device_driver lapic_nmi_driver = {
-	.name		= "lapic_nmi",
-	.bus		= &system_bus_type,
+
+static struct sysdev_class nmi_sysclass = {
+	set_kset_name("lapic_nmi"),
 	.resume		= lapic_nmi_resume,
 	.suspend	= lapic_nmi_suspend,
 };
 
 static struct sys_device device_lapic_nmi = {
-	.name		= "lapic_nmi",
-	.id		= 0,
-	.dev		= {
-		.name	= "lapic_nmi",
-		.driver	= &lapic_nmi_driver,
-		.parent = &device_lapic.dev,
-	},
+	.id	= 0,
+	.cls	= &nmi_sysclass,
 };
 
-static int __init init_lapic_nmi_devicefs(void)
+static int __init init_lapic_nmi_sysfs(void)
 {
+	int error;
+
 	if (nmi_active == 0)
 		return 0;
-	driver_register(&lapic_nmi_driver);
-	return sys_device_register(&device_lapic_nmi);
+
+	error = sysdev_class_register(&nmi_sysclass);
+	if (!error)
+		error = sys_device_register(&device_lapic_nmi);
+	return error;
 }
 /* must come after the local APIC's device_initcall() */
-late_initcall(init_lapic_nmi_devicefs);
+late_initcall(init_lapic_nmi_sysfs);
 
 #endif	/* CONFIG_PM */
 

arch/i386/kernel/time.c

@@ -42,7 +42,7 @@
 #include <linux/init.h>
 #include <linux/smp.h>
 #include <linux/module.h>
-#include <linux/device.h>
+#include <linux/sysdev.h>
 #include <linux/bcd.h>
 
 #include <asm/io.h>
@@ -278,18 +278,22 @@ unsigned long get_cmos_time(void)
 	return retval;
 }
 
+static struct sysdev_class rtc_sysclass = {
+	set_kset_name("rtc"),
+};
+
 /* XXX this driverfs stuff should probably go elsewhere later -john */
 static struct sys_device device_i8253 = {
-	.name		= "rtc",
 	.id		= 0,
-	.dev	= {
-		.name	= "i8253 Real Time Clock",
-	},
+	.cls	= &rtc_sysclass,
 };
 
 static int time_init_device(void)
 {
-	return sys_device_register(&device_i8253);
+	int error = sysdev_class_register(&rtc_sysclass);
+	if (!error)
+		error = sys_device_register(&device_i8253);
+	return error;
 }
 
 device_initcall(time_init_device);

arch/i386/oprofile/nmi_int.c

@@ -11,7 +11,7 @@
 #include <linux/notifier.h>
 #include <linux/smp.h>
 #include <linux/oprofile.h>
-#include <linux/device.h>
+#include <linux/sysdev.h>
 #include <asm/nmi.h>
 #include <asm/msr.h>
 #include <asm/apic.h>
@@ -31,53 +31,48 @@ static int nmi_enabled = 0;
 
 #ifdef CONFIG_PM
 
-static int nmi_suspend(struct device *dev, u32 state, u32 level)
+static int nmi_suspend(struct sys_device *dev, u32 state)
 {
-	if (level != SUSPEND_POWER_DOWN)
-		return 0;
 	if (nmi_enabled == 1)
 		nmi_stop();
 	return 0;
 }
 
 
-static int nmi_resume(struct device *dev, u32 level)
+static int nmi_resume(struct sys_device *dev)
 {
-	if (level != RESUME_POWER_ON)
-		return 0;
 	if (nmi_enabled == 1)
 		nmi_start();
 	return 0;
 }
 
 
-static struct device_driver nmi_driver = {
-	.name		= "oprofile",
-	.bus		= &system_bus_type,
+static struct sysdev_class oprofile_sysclass = {
+	set_kset_name("oprofile"),
 	.resume		= nmi_resume,
 	.suspend	= nmi_suspend,
 };
 
 
-static struct device device_nmi = {
-	.name	= "oprofile",
-	.bus_id = "oprofile",
-	.driver	= &nmi_driver,
-	.parent = &device_lapic.dev,
+static struct sys_device device_oprofile = {
+	.id	= 0,
+	.cls	= &oprofile_sysclass,
 };
 
 
 static int __init init_driverfs(void)
 {
-	driver_register(&nmi_driver);
-	return device_register(&device_nmi);
+	int error;
+	if (!(error = sysdev_class_register(&oprofile_sysclass)))
+		error = sys_device_register(&device_oprofile);
+	return error;
 }
 
 
 static void __exit exit_driverfs(void)
 {
-	device_unregister(&device_nmi);
-	driver_unregister(&nmi_driver);
+	sys_device_unregister(&device_oprofile);
+	sysdev_class_unregister(&oprofile_sysclass);
 }
 
 #else

arch/x86_64/kernel/i8259.c

@@ -11,7 +11,7 @@
 #include <linux/smp_lock.h>
 #include <linux/init.h>
 #include <linux/kernel_stat.h>
-#include <linux/device.h>
+#include <linux/sysdev.h>
 
 #include <asm/atomic.h>
 #include <asm/system.h>
@@ -413,35 +413,31 @@ static void setup_timer(void)
 	outb(LATCH >> 8 , 0x40);	/* MSB */
 }
 
-static int timer_resume(struct device *dev, u32 level)
+static int timer_resume(struct sys_device *dev)
 {
-	if (level == RESUME_POWER_ON)
-		setup_timer();
+	setup_timer();
 	return 0;
 }
 
-static struct device_driver timer_driver = {
-	.name		= "timer",
-	.bus		= &system_bus_type,
+static struct sysdev_class timer_sysclass = {
+	set_kset_name("timer"),
 	.resume		= timer_resume,
 };
 
 static struct sys_device device_timer = {
-	.name		= "timer",
 	.id		= 0,
-	.dev		= {
-		.name	= "timer",
-		.driver	= &timer_driver,
-	},
+	.cls		&timer_sysclass,
 };
 
-static int __init init_timer_devicefs(void)
+static int __init init_timer_sysfs(void)
 {
-	driver_register(&timer_driver);
-	return sys_device_register(&device_timer);
+	int error = sysdev_class_register(&timer_sysclass);
+	if (!error)
+		error = sys_device_register(&device_timer);
+	return error;
 }
 
-device_initcall(init_timer_devicefs);
+device_initcall(init_timer_sysfs);
 
 void __init init_IRQ(void)
 {

drivers/base/cpu.c

@@ -2,23 +2,18 @@
  * drivers/base/cpu.c - basic CPU class support
  */
 
-#include <linux/device.h>
+#include <linux/sysdev.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/cpu.h>
 #include <linux/topology.h>
 
 
-struct class cpu_class = {
-	.name		= "cpu",
+struct sysdev_class cpu_sysdev_class = {
+	set_kset_name("cpu"),
 };
 
 
-struct device_driver cpu_driver = {
-	.name		= "cpu",
-	.bus		= &system_bus_type,
-};
-
 /*
  * register_cpu - Setup a driverfs device for a CPU.
  * @num - CPU number to use when creating the device.
@@ -27,42 +22,15 @@ struct device_driver cpu_driver = {
  */
 int __init register_cpu(struct cpu *cpu, int num, struct node *root)
 {
-	int retval;
-
 	cpu->node_id = cpu_to_node(num);
-	cpu->sysdev.name = "cpu";
 	cpu->sysdev.id = num;
-	if (root)
-		cpu->sysdev.root = &root->sysroot;
-	snprintf(cpu->sysdev.dev.name, DEVICE_NAME_SIZE, "CPU %u", num);
-	cpu->sysdev.dev.driver = &cpu_driver;
-	retval = sys_device_register(&cpu->sysdev);
-	if (retval)
-		return retval;
-	memset(&cpu->sysdev.class_dev, 0x00, sizeof(struct class_device));
-	cpu->sysdev.class_dev.dev = &cpu->sysdev.dev;
-	cpu->sysdev.class_dev.class = &cpu_class;
-	snprintf(cpu->sysdev.class_dev.class_id, BUS_ID_SIZE, "cpu%d", num);
-	retval = class_device_register(&cpu->sysdev.class_dev);
-	if (retval) {
-		sys_device_unregister(&cpu->sysdev);
-		return retval;
-	}
-	return 0;
+	cpu->sysdev.cls = &cpu_sysdev_class;
+	return sys_device_register(&cpu->sysdev);
 }
 
 
+
 int __init cpu_dev_init(void)
 {
-	int error;
-
-	error = class_register(&cpu_class);
-	if (error)
-		goto out;
-	
-	error = driver_register(&cpu_driver);
-	if (error)
-		class_unregister(&cpu_class);
-out:
-	return error;
+	return sysdev_class_register(&cpu_sysdev_class);
 }

drivers/base/memblk.c

@@ -2,7 +2,6 @@
  * drivers/base/memblk.c - basic Memory Block class support
  */
 
-#include <linux/device.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/memblk.h>
@@ -10,8 +9,8 @@
 #include <linux/topology.h>
 
 
-static struct class memblk_class = {
-	.name		= "memblk",
+static struct sysdev_class memblk_class = {
+	set_kset_name("memblk"),
 };
 
 
@@ -29,27 +28,23 @@ static struct device_driver memblk_driver = {
  */
 int __init register_memblk(struct memblk *memblk, int num, struct node *root)
 {
+	int error;
+
 	memblk->node_id = memblk_to_node(num);
-	memblk->sysdev.name = "memblk";
+	memblk->sysdev.cls = &memblk_class,
 	memblk->sysdev.id = num;
-	if (root)
-		memblk->sysdev.root = &root->sysroot;
-	snprintf(memblk->sysdev.dev.name, DEVICE_NAME_SIZE, "Memory Block %u", num);
-	memblk->sysdev.dev.driver = &memblk_driver;
-	return sys_device_register(&memblk->sysdev);
+
+	error = sys_device_register(&memblk->sysdev);
+	if (!error) 
+		error = sysfs_create_link(&root->sysdev.kobj,
+					  &memblk->sysdev,kobj,
+					  memblk->sysdev.kobj.name);
+	return error;
 }
 
 
 int __init register_memblk_type(void)
 {
-	int error;
-
-	error = class_register(&memblk_class);
-	if (!error) {
-		error = driver_register(&memblk_driver);
-		if (error)
-			class_unregister(&memblk_class);
-	}
-	return error;
+	return sysdev_class_register(&memblk_class);
 }
 postcore_initcall(register_memblk_type);

drivers/base/node.c

@@ -9,15 +9,8 @@
 #include <linux/node.h>
 #include <linux/topology.h>
 
-
-static struct class node_class = {
-	.name		= "node",
-};
-
-
-static struct device_driver node_driver = {
-	.name		= "node",
-	.bus		= &system_bus_type,
+static struct sysdev_class node_class = {
+	set_kset_name("node"),
 };
 
 
@@ -26,7 +19,7 @@ static ssize_t node_read_cpumap(struct device * dev, char * buf)
 	struct node *node_dev = to_node(to_root(dev));
         return sprintf(buf,"%lx\n",node_dev->cpumap);
 }
-static DEVICE_ATTR(cpumap,S_IRUGO,node_read_cpumap,NULL);
+static SYSDEV_ATTR(cpumap,S_IRUGO,node_read_cpumap,NULL);
 
 #define K(x) ((x) << (PAGE_SHIFT - 10))
 static ssize_t node_read_meminfo(struct device * dev, char * buf)
@@ -52,7 +45,7 @@ static ssize_t node_read_meminfo(struct device * dev, char * buf)
 		       nid, K(i.freeram-i.freehigh));
 }
 #undef K 
-static DEVICE_ATTR(meminfo,S_IRUGO,node_read_meminfo,NULL);
+static SYSDEV_ATTR(meminfo,S_IRUGO,node_read_meminfo,NULL);
 
 
 /*
@@ -66,17 +59,13 @@ int __init register_node(struct node *node, int num, struct node *parent)
 	int error;
 
 	node->cpumap = node_to_cpumask(num);
-	node->sysroot.id = num;
-	if (parent)
-		node->sysroot.dev.parent = &parent->sysroot.sysdev;
-	snprintf(node->sysroot.dev.name, DEVICE_NAME_SIZE, "Node %u", num);
-	snprintf(node->sysroot.dev.bus_id, BUS_ID_SIZE, "node%u", num);
-	node->sysroot.dev.driver = &node_driver;
-	node->sysroot.dev.bus = &system_bus_type;
-	error = sys_register_root(&node->sysroot);
+	node->sysdev.id = num;
+	node->sysdev.cls = &node_class;
+	error = sys_device_register(&node->sysdev);
+
 	if (!error){
-		device_create_file(&node->sysroot.dev, &dev_attr_cpumap);
-		device_create_file(&node->sysroot.dev, &dev_attr_meminfo);
+		sys_device_create_file(&node->sysroot.dev, &attr_cpumap);
+		sys_device_create_file(&node->sysroot.dev, &attr_meminfo);
 	}
 	return error;
 }
@@ -84,14 +73,6 @@ int __init register_node(struct node *node, int num, struct node *parent)
 
 int __init register_node_type(void)
 {
-	int error;
-	
-	error = class_register(&node_class);
-	if (!error) {
-		error = driver_register(&node_driver);
-		if (error)
-			class_unregister(&node_class);
-	}
-	return error;
+	return sysdev_class_register(&node_class);
 }
 postcore_initcall(register_node_type);

drivers/base/power.c

@@ -21,6 +21,21 @@
 
 extern struct subsystem devices_subsys;
 
+/**
+ * We handle system devices differently - we suspend and shut them 
+ * down first and resume them first. That way, we do anything stupid like
+ * shutting down the interrupt controller before any devices..
+ *
+ * Note that there are not different stages for power management calls - 
+ * they only get one called once when interrupts are disabled. 
+ */
+
+extern int sysdev_shutdown(void);
+extern int sysdev_save(u32 state);
+extern int sysdev_suspend(u32 state);
+extern int sysdev_resume(void);
+extern int sysdev_restore(void);
+
 /**
  * device_suspend - suspend/remove all devices on the device ree
  * @state:	state we're entering
@@ -50,6 +65,21 @@ int device_suspend(u32 state, u32 level)
 		}
 	}
 	up_write(&devices_subsys.rwsem);
+
+	/*
+	 * Make sure system devices are suspended.
+	 */
+	switch(level) {
+	case SUSPEND_SAVE_STATE:
+		sysdev_save(state);
+		break;
+	case SUSPEND_POWER_DOWN:
+		sysdev_suspend(state);
+		break;
+	default:
+		break;
+	}
+
 	return error;
 }
 
@@ -65,6 +95,17 @@ void device_resume(u32 level)
 {
 	struct list_head * node;
 
+	switch (level) {
+	case RESUME_POWER_ON:
+		sysdev_resume();
+		break;
+	case RESUME_RESTORE_STATE:
+		sysdev_restore();
+		break;
+	default:
+		break;
+	}
+
 	down_write(&devices_subsys.rwsem);
 	list_for_each_prev(node,&devices_subsys.kset.list) {
 		struct device * dev = to_dev(node);
@@ -98,6 +139,8 @@ void device_shutdown(void)
 			pr_debug("Ignored.\n");
 	}
 	up_write(&devices_subsys.rwsem);
+
+	sysdev_shutdown();
 }
 
 EXPORT_SYMBOL(device_suspend);

drivers/s390/block/xpram.c

@@ -34,7 +34,7 @@
 #include <linux/blk.h>
 #include <linux/blkpg.h>
 #include <linux/hdreg.h>  /* HDIO_GETGEO */
-#include <linux/device.h>
+#include <linux/sysdev.h>
 #include <linux/bio.h>
 #include <linux/devfs_fs_kernel.h>
 #include <asm/uaccess.h>
@@ -48,12 +48,14 @@
 #define PRINT_WARN(x...)	printk(KERN_WARNING XPRAM_NAME " warning:" x)
 #define PRINT_ERR(x...)		printk(KERN_ERR XPRAM_NAME " error:" x)
 
+
+static struct sysdev_class xpram_sysclass = {
+	set_kset_name("xpram"),
+};
+
 static struct sys_device xpram_sys_device = {
-	.name = "S/390 expanded memory RAM disk",
-	.dev  = {
-		.name   = "S/390 expanded memory RAM disk",
-		.bus_id = "xpram",
-	},
+	.id	= 0,
+	.cls	= &xpram_sysclass,
 }; 
 
 typedef struct {
@@ -485,6 +487,7 @@ static void __exit xpram_exit(void)
 	unregister_blkdev(XPRAM_MAJOR, XPRAM_NAME);
 	devfs_remove("slram");
 	sys_device_unregister(&xpram_sys_device);
+	sysdev_class_unregister(&xpram_sys_class);
 }
 
 static int __init xpram_init(void)
@@ -502,9 +505,15 @@ static int __init xpram_init(void)
 	rc = xpram_setup_sizes(xpram_pages);
 	if (rc)
 		return rc;
-	rc = sys_device_register(&xpram_sys_device);
+	rc = sysdev_class_register(&xpram_sysclass);
 	if (rc)
 		return rc;
+
+	rc = sys_device_register(&xpram_sys_device);
+	if (rc) {
+		sysdev_class_unregister(&xpram_syclass);
+		return rc;
+	}
 	rc = xpram_setup_blkdev();
 	if (rc)
 		sys_device_unregister(&xpram_sys_device);

drivers/usb/core/devices.c

@@ -444,7 +444,7 @@ static char *usb_dump_string(char *start, char *end, const struct usb_device *de
  * skip_bytes - the number of bytes to skip before writing anything
  * file_offset - the offset into the devices file on completion
  */
-static ssize_t usb_device_dump(char **buffer, size_t *nbytes, loff_t *skip_bytes, loff_t *file_offset,
+static ssize_t usb_device_dump(char __user **buffer, size_t *nbytes, loff_t *skip_bytes, loff_t *file_offset,
 				struct usb_device *usbdev, struct usb_bus *bus, int level, int index, int count)
 {
 	int chix;
@@ -554,7 +554,7 @@ static ssize_t usb_device_dump(char **buffer, size_t *nbytes, loff_t *skip_bytes
 	return total_written;
 }
 
-static ssize_t usb_device_read(struct file *file, char *buf, size_t nbytes, loff_t *ppos)
+static ssize_t usb_device_read(struct file *file, char __user *buf, size_t nbytes, loff_t *ppos)
 {
 	struct list_head *buslist;
 	struct usb_bus *bus;

drivers/usb/core/hub.h

@@ -174,7 +174,12 @@ struct usb_hub {
 	struct urb		*urb;		/* for interrupt polling pipe */
 
 	/* buffer for urb ... 1 bit each for hub and children, rounded up */
-	char			buffer[(USB_MAXCHILDREN + 1 + 7) / 8];
+	char			(*buffer)[(USB_MAXCHILDREN + 1 + 7) / 8];
+	dma_addr_t		buffer_dma;	/* DMA address for buffer */
+	union {
+		struct usb_hub_status	hub;
+		struct usb_port_status	port;
+	}			*status;	/* buffer for status reports */
 
 	int			error;		/* last reported error */
 	int			nerrors;	/* track consecutive errors */

drivers/usb/core/inode.c

@@ -282,13 +282,13 @@ static int usbfs_rmdir(struct inode *dir, struct dentry *dentry)
 
 
 /* default file operations */
-static ssize_t default_read_file (struct file *file, char *buf,
+static ssize_t default_read_file (struct file *file, char __user *buf,
 				  size_t count, loff_t *ppos)
 {
 	return 0;
 }
 
-static ssize_t default_write_file (struct file *file, const char *buf,
+static ssize_t default_write_file (struct file *file, const char __user *buf,
 				   size_t count, loff_t *ppos)
 {
 	return count;

drivers/usb/gadget/net2280.c

@@ -20,10 +20,12 @@
  * short OUT transfers happen.)  Drivers can use the req->no_interrupt
  * hint to completely eliminate some IRQs, if a later IRQ is guaranteed
  * and DMA chaining is enabled.
+ *
+ * Note that almost all the errata workarounds here are only needed for
+ * rev1 chips.  Rev1a silicon (0110) fixes almost all of them.
  */
 
-// #define NET2280_DMA_OUT_WORKAROUND
-// #define USE_DMA_CHAINING
+#define USE_DMA_CHAINING
 
 
 /*
@@ -180,6 +182,13 @@ net2280_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
 		 * kicking in the "toggle-irrelevant" mode.
 		 */
 		tmp = USB_ENDPOINT_XFER_BULK;
+	} else if (tmp == USB_ENDPOINT_XFER_BULK) {
+		/* catch some particularly blatant driver bugs */
+		if ((dev->gadget.speed == USB_SPEED_HIGH
+					&& max != 512)
+				|| (dev->gadget.speed == USB_SPEED_FULL
+					&& max > 64))
+			return -ERANGE;
 	}
 	ep->is_iso = (tmp == USB_ENDPOINT_XFER_ISOC) ? 1 : 0;
 	tmp <<= ENDPOINT_TYPE;
@@ -252,9 +261,6 @@ static int handshake (u32 *ptr, u32 mask, u32 done, int usec)
 		udelay (1);
 		usec--;
 	} while (usec > 0);
-#ifdef DEBUG
-	if (done == 0) dump_stack (); 		/* ignore out_flush timeout */
-#endif
 	return -ETIMEDOUT;
 }
 
@@ -917,6 +923,8 @@ net2280_queue (struct usb_ep *_ep, struct usb_request *_req, int gfp_flags)
 					 */
 					if (read_fifo (ep, req)) {
 						done (ep, req, 0);
+						if (ep->num == 0)
+							allow_status (ep);
 						/* don't queue it */
 						req = 0;
 					} else
@@ -1194,9 +1202,12 @@ net2280_set_halt (struct usb_ep *_ep, int value)
 	VDEBUG (ep->dev, "%s %s halt\n", _ep->name, value ? "set" : "clear");
 
 	/* set/clear, then synch memory views with the device */
-	if (value)
-		set_halt (ep);
-	else
+	if (value) {
+		if (ep->num == 0)
+			ep->dev->protocol_stall = 1;
+		else
+			set_halt (ep);
+	} else
 		clear_halt (ep);
 	(void) readl (&ep->regs->ep_rsp);
 
@@ -2042,7 +2053,8 @@ static void handle_ep_small (struct net2280_ep *ep)
 			 * can decide to stall ep0 after that done() returns,
 			 * from non-irq context
 			 */
-			allow_status (ep);
+			if (!ep->stopped)
+				allow_status (ep);
 			req = 0;
 		} else {
 			if (!list_empty (&ep->queue) && !ep->stopped)

drivers/usb/host/ohci-q.c

@@ -377,12 +377,8 @@ static struct ed *ed_get (
 		ed->type = type;
 	}
 
-	/* FIXME:  Don't do this without knowing it's safe to clobber this
-	 * state/mode info.  Currently the upper layers don't support such
-	 * guarantees; we're lucky changing config/altsetting is rare.
-	 * The state/mode info also changes during enumeration: set_address
-	 * uses the 'wrong' device address, and ep0 maxpacketsize will often
-	 * improve on the initial value.
+	/* NOTE: only ep0 currently needs this "re"init logic, during
+	 * enumeration (after set_address, or if ep0 maxpacket >8).
 	 */
   	if (ed->state == ED_IDLE) {
 		u32	info;

drivers/usb/image/hpusbscsi.c

@@ -45,7 +45,7 @@ hpusbscsi_usb_probe(struct usb_interface *intf,
 	struct usb_host_interface *altsetting =	intf->altsetting;
 	struct hpusbscsi *new;
 	int error = -ENOMEM;
-	int i, result;
+	int i;
 
 	if (altsetting->desc.bNumEndpoints != 3) {
 		printk (KERN_ERR "Wrong number of endpoints\n");

drivers/usb/media/vicam.c

@@ -1101,6 +1101,52 @@ static int vicam_read_proc_gain(char *page, char **start, off_t off,
 				((struct vicam_camera *)data)->gain);
 }
 
+static int
+vicam_write_proc_shutter(struct file *file, const char *buffer,
+			 unsigned long count, void *data)
+{
+	u16 stmp;
+	char kbuf[8];
+	struct vicam_camera *cam = (struct vicam_camera *) data;
+
+	if (count > 6)
+		return -EINVAL;
+
+	if (copy_from_user(kbuf, buffer, count))
+		return -EFAULT;
+
+	stmp = (u16) simple_strtoul(kbuf, NULL, 10);
+	if (stmp < 4 || stmp > 32000)
+		return -EINVAL;
+
+	cam->shutter_speed = stmp;
+
+	return count;
+}
+
+static int
+vicam_write_proc_gain(struct file *file, const char *buffer,
+		      unsigned long count, void *data)
+{
+	u16 gtmp;
+	char kbuf[8];
+
+	struct vicam_camera *cam = (struct vicam_camera *) data;
+
+	if (count > 4)
+		return -EINVAL;
+
+	if (copy_from_user(kbuf, buffer, count))
+		return -EFAULT;
+
+	gtmp = (u16) simple_strtoul(kbuf, NULL, 10);
+	if (gtmp > 255)
+		return -EINVAL;
+	cam->gain = gtmp;
+
+	return count;
+}
+
 static void
 vicam_create_proc_root(void)
 {
@@ -1142,18 +1188,21 @@ vicam_create_proc_entry(struct vicam_camera *cam)
 	if ( !cam->proc_dir )
 		return; // FIXME: We should probably return an error here
 	
-	ent =
-	    create_proc_entry("shutter", S_IFREG | S_IRUGO, cam->proc_dir);
+	ent = create_proc_entry("shutter", S_IFREG | S_IRUGO | S_IWUSR,
+				cam->proc_dir);
 	if (ent) {
 		ent->data = cam;
 		ent->read_proc = vicam_read_proc_shutter;
+		ent->write_proc = vicam_write_proc_shutter;
 		ent->size = 64;
 	}
 
-	ent = create_proc_entry("gain", S_IFREG | S_IRUGO , cam->proc_dir);
-	if ( ent ) {
+	ent = create_proc_entry("gain", S_IFREG | S_IRUGO | S_IWUSR,
+				cam->proc_dir);
+	if (ent) {
 		ent->data = cam;
 		ent->read_proc = vicam_read_proc_gain;
+		ent->write_proc = vicam_write_proc_gain;
 		ent->size = 64;
 	}
 }

drivers/usb/net/catc.c

@@ -63,6 +63,8 @@ MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
 
+static const char driver_name[] = "catc";
+
 /*
  * Some defines.
  */ 
@@ -677,7 +679,7 @@ static int netdev_ethtool_ioctl(struct net_device *dev, void *useraddr)
         /* get driver info */
         case ETHTOOL_GDRVINFO: {
                 struct ethtool_drvinfo info = {ETHTOOL_GDRVINFO};
-                strncpy(info.driver, SHORT_DRIVER_DESC, ETHTOOL_BUSINFO_LEN);
+                strncpy(info.driver, driver_name, ETHTOOL_BUSINFO_LEN);
                 strncpy(info.version, DRIVER_VERSION, ETHTOOL_BUSINFO_LEN);
 		usb_make_path (catc->usbdev, info.bus_info, sizeof info.bus_info);
                 if (copy_to_user(useraddr, &info, sizeof(info)))
@@ -978,7 +980,7 @@ MODULE_DEVICE_TABLE(usb, catc_id_table);
 
 static struct usb_driver catc_driver = {
 	.owner =	THIS_MODULE,
-	.name =		"catc",
+	.name =		driver_name,
 	.probe =	catc_probe,
 	.disconnect =	catc_disconnect,
 	.id_table =	catc_id_table,

drivers/usb/net/kaweth.c

@@ -114,6 +114,8 @@ MODULE_AUTHOR("Michael Zappe <zapman@interlan.net>, Stephane Alnet <stephane@u-p
 MODULE_DESCRIPTION("KL5USB101 USB Ethernet driver");
 MODULE_LICENSE("GPL");
 
+static const char driver_name[] = "kaweth";
+
 static int kaweth_probe(
 		struct usb_interface *intf,
 		const struct usb_device_id *id	/* from id_table */
@@ -169,7 +171,7 @@ MODULE_DEVICE_TABLE (usb, usb_klsi_table);
  ****************************************************************/
 static struct usb_driver kaweth_driver = {
 	.owner =	THIS_MODULE,
-	.name =		"kaweth",
+	.name =		driver_name,
 	.probe =	kaweth_probe,
 	.disconnect =	kaweth_disconnect,
 	.id_table =     usb_klsi_table,
@@ -670,7 +672,7 @@ static int netdev_ethtool_ioctl(struct net_device *dev, void *useraddr)
 	switch (ethcmd) {
 	case ETHTOOL_GDRVINFO: {
 		struct ethtool_drvinfo info = {ETHTOOL_GDRVINFO};
-		strlcpy(info.driver, "kaweth", sizeof(info.driver));
+		strlcpy(info.driver, driver_name, sizeof(info.driver));
 		if (copy_to_user(useraddr, &info, sizeof(info)))
 			return -EFAULT;
 		return 0;

drivers/usb/net/pegasus.c

 /*
- *  Copyright (c) 1999-2002 Petko Manolov (petkan@users.sourceforge.net)
+ *  Copyright (c) 1999-2003 Petko Manolov (petkan@users.sourceforge.net)
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -45,7 +45,7 @@
 /*
  * Version Information
  */
-#define DRIVER_VERSION "v0.5.10 (2003/04/01)"
+#define DRIVER_VERSION "v0.5.12 (2003/06/06)"
 #define DRIVER_AUTHOR "Petko Manolov <petkan@users.sourceforge.net>"
 #define DRIVER_DESC "Pegasus/Pegasus II USB Ethernet driver"
 
@@ -564,7 +564,14 @@ static void read_bulk_callback(struct urb *urb, struct pt_regs *regs)
 		dbg("%s: reset MAC", net->name);
 		pegasus->flags &= ~PEGASUS_RX_BUSY;
 		break;
+	case -EPIPE:		/* stall, or disconnect from TT */
+		/* FIXME schedule work to clear the halt */
+		warn("%s: no rx stall recovery", net->name);
+		return;
 	case -ENOENT:
+	case -ECONNRESET:
+	case -ESHUTDOWN:
+		dbg("%s: rx unlink, %d", net->name, urb->status);
 		return;
 	default:
 		dbg("%s: RX status %d", net->name, urb->status);
@@ -604,6 +611,9 @@ static void read_bulk_callback(struct urb *urb, struct pt_regs *regs)
 	pegasus->stats.rx_packets++;
 	pegasus->stats.rx_bytes += pkt_len;
 
+	if (pegasus->flags & PEGASUS_UNPLUG)
+		return;
+
 	spin_lock(&pegasus->rx_pool_lock);
 	pegasus->rx_skb = pull_skb(pegasus);
 	spin_unlock(&pegasus->rx_pool_lock);
@@ -631,24 +641,24 @@ static void read_bulk_callback(struct urb *urb, struct pt_regs *regs)
 static void rx_fixup(unsigned long data)
 {
 	pegasus_t *pegasus;
+	unsigned long flags;
 
 	pegasus = (pegasus_t *) data;
+	if (pegasus->flags & PEGASUS_UNPLUG)
+		return;
 
-	spin_lock_irq(&pegasus->rx_pool_lock);
+	spin_lock_irqsave(&pegasus->rx_pool_lock, flags);
 	fill_skb_pool(pegasus);
-	spin_unlock_irq(&pegasus->rx_pool_lock);
 	if (pegasus->flags & PEGASUS_RX_URB_FAIL)
 		if (pegasus->rx_skb)
 			goto try_again;
 	if (pegasus->rx_skb == NULL) {
-		spin_lock_irq(&pegasus->rx_pool_lock);
 		pegasus->rx_skb = pull_skb(pegasus);
-		spin_unlock_irq(&pegasus->rx_pool_lock);
 	}
 	if (pegasus->rx_skb == NULL) {
 		warn("wow, low on memory");
 		tasklet_schedule(&pegasus->rx_tl);
-		return;
+		goto done;
 	}
 	usb_fill_bulk_urb(pegasus->rx_urb, pegasus->usb,
 			  usb_rcvbulkpipe(pegasus->usb, 1),
@@ -661,23 +671,41 @@ static void rx_fixup(unsigned long data)
 	} else {
 		pegasus->flags &= ~PEGASUS_RX_URB_FAIL;
 	}
+done:
+	spin_unlock_irqrestore(&pegasus->rx_pool_lock, flags);
 }
 
 static void write_bulk_callback(struct urb *urb, struct pt_regs *regs)
 {
 	pegasus_t *pegasus = urb->context;
+	struct net_device *net = pegasus->net;
 
 	if (!pegasus || !(pegasus->flags & PEGASUS_RUNNING))
 		return;
 
-	if (!netif_device_present(pegasus->net))
+	if (!netif_device_present(net))
 		return;
 
-	if (urb->status)
-		info("%s: TX status %d", pegasus->net->name, urb->status);
+	switch (urb->status) {
+	case -EPIPE:
+		/* FIXME schedule_work() to clear the tx halt */
+		netif_stop_queue(net);
+		warn("%s: no tx stall recovery", net->name);
+		return;
+	case -ENOENT:
+	case -ECONNRESET:
+	case -ESHUTDOWN:
+		dbg("%s: tx unlink, %d", net->name, urb->status);
+		return;
+	default:
+		info("%s: TX status %d", net->name, urb->status);
+		/* FALL THROUGH */
+	case 0:
+		break;
+	}
 
-	pegasus->net->trans_start = jiffies;
-	netif_wake_queue(pegasus->net);
+	net->trans_start = jiffies;
+	netif_wake_queue(net);
 }
 
 static void intr_callback(struct urb *urb, struct pt_regs *regs)
@@ -754,8 +782,16 @@ static int pegasus_start_xmit(struct sk_buff *skb, struct net_device *net)
 			  write_bulk_callback, pegasus);
 	if ((res = usb_submit_urb(pegasus->tx_urb, GFP_ATOMIC))) {
 		warn("failed tx_urb %d", res);
-		pegasus->stats.tx_errors++;
-		netif_start_queue(net);
+		switch (res) {
+		case -EPIPE:		/* stall, or disconnect from TT */
+			/* cleanup should already have been scheduled */
+			break;
+		case -ENODEV:		/* disconnect() upcoming */
+			break;
+		default:
+			pegasus->stats.tx_errors++;
+			netif_start_queue(net);
+		}
 	} else {
 		pegasus->stats.tx_packets++;
 		pegasus->stats.tx_bytes += skb->len;
@@ -903,6 +939,7 @@ static int pegasus_close(struct net_device *net)
 	netif_stop_queue(net);
 	if (!(pegasus->flags & PEGASUS_UNPLUG))
 		disable_net_traffic(pegasus);
+	tasklet_kill(&pegasus->rx_tl);
 	unlink_all_urbs(pegasus);
 
 	return 0;
@@ -920,11 +957,15 @@ static int pegasus_ethtool_ioctl(struct net_device *dev, void *useraddr)
 	switch (ethcmd) {
 	/* get driver-specific version/etc. info */
 	case ETHTOOL_GDRVINFO:{
-			struct ethtool_drvinfo info = { ETHTOOL_GDRVINFO };
-			strlcpy(info.driver, driver_name,
-				sizeof (info.driver));
-			strlcpy(info.version, DRIVER_VERSION,
-				sizeof (info.version));
+			struct ethtool_drvinfo info;
+			memset (&info, 0, sizeof (info));
+			info.cmd = ETHTOOL_GDRVINFO;
+			strncpy(info.driver, driver_name,
+				sizeof (info.driver) - 1);
+			strncpy(info.version, DRIVER_VERSION,
+				sizeof (info.version) - 1);
+			usb_make_path(pegasus->usb, info.bus_info,
+				      sizeof (info.bus_info));
 			if (copy_to_user(useraddr, &info, sizeof (info)))
 				return -EFAULT;
 			return 0;
@@ -993,12 +1034,15 @@ static int pegasus_ethtool_ioctl(struct net_device *net, void *uaddr)
 		return -EFAULT;
 	switch (cmd) {
 	case ETHTOOL_GDRVINFO:{
-			struct ethtool_drvinfo info = { ETHTOOL_GDRVINFO };
-			strncpy(info.driver, driver_name, sizeof info.driver);
+			struct ethtool_drvinfo info;
+			memset (&info, 0, sizeof (info));
+			info.cmd = ETHTOOL_GDRVINFO;
+			strncpy(info.driver, driver_name,
+				sizeof (info.driver) - 1);
 			strncpy(info.version, DRIVER_VERSION,
-				ETHTOOL_BUSINFO_LEN);
+				sizeof (info.version) - 1);
 			usb_make_path(pegasus->usb, info.bus_info,
-				      sizeof info.bus_info);
+				      sizeof (info.bus_info));
 			if (copy_to_user(uaddr, &info, sizeof (info)))
 				return -EFAULT;
 			return 0;
@@ -1006,15 +1050,20 @@ static int pegasus_ethtool_ioctl(struct net_device *net, void *uaddr)
 	case ETHTOOL_GSET:{
 			struct ethtool_cmd ecmd;
 			short lpa, bmcr;
+			u8 port;
 
-			memset(&ecmd, 0, sizeof ecmd);
+			memset(&ecmd, 0, sizeof (ecmd));
 			ecmd.supported = (SUPPORTED_10baseT_Half |
 					  SUPPORTED_10baseT_Full |
 					  SUPPORTED_100baseT_Half |
 					  SUPPORTED_100baseT_Full |
 					  SUPPORTED_Autoneg |
 					  SUPPORTED_TP | SUPPORTED_MII);
-			ecmd.port = PORT_TP;
+			get_registers(pegasus, Reg7b, 1, &port);
+			if (port == 0)
+				ecmd.port = PORT_MII;
+			else
+				ecmd.port = PORT_TP;
 			ecmd.transceiver = XCVR_INTERNAL;
 			ecmd.phy_address = pegasus->phy;
 			read_mii_word(pegasus, pegasus->phy, MII_BMCR, &bmcr);
@@ -1132,7 +1181,10 @@ static inline void setup_pegasus_II(pegasus_t * pegasus)
 	set_register(pegasus, Reg1d, 0);
 	set_register(pegasus, Reg7b, 1);
 	mdelay(100);
-	set_register(pegasus, Reg7b, 2);
+	if ((pegasus->features & HAS_HOME_PNA) && mii_mode)
+		set_register(pegasus, Reg7b, 0);
+	else
+		set_register(pegasus, Reg7b, 2);
 
 	set_register(pegasus, 0x83, data);
 	get_registers(pegasus, 0x83, 1, &data);
@@ -1253,7 +1305,6 @@ static void pegasus_disconnect(struct usb_interface *intf)
 	pegasus->flags |= PEGASUS_UNPLUG;
 	unregister_netdev(pegasus->net);
 	usb_put_dev(interface_to_usbdev(intf));
-	unlink_all_urbs(pegasus);
 	free_all_urbs(pegasus);
 	free_skb_pool(pegasus);
 	if (pegasus->rx_skb)
@@ -1263,7 +1314,6 @@ static void pegasus_disconnect(struct usb_interface *intf)
 }
 
 static struct usb_driver pegasus_driver = {
-	.owner = THIS_MODULE,
 	.name = driver_name,
 	.probe = pegasus_probe,
 	.disconnect = pegasus_disconnect,

drivers/usb/net/pegasus.h

 /*
- * Copyright (c) 1999-2002 Petko Manolov - Petkan (petkan@users.sourceforge.net)
+ * Copyright (c) 1999-2003 Petko Manolov - Petkan (petkan@users.sourceforge.net)
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as published
@@ -129,6 +129,7 @@ struct usb_eth_dev {
 #define	VENDOR_ELCON		0x0db7
 #define	VENDOR_ELSA		0x05cc
 #define	VENDOR_HAWKING		0x0e66
+#define	VENDOR_HP		0x03f0
 #define	VENDOR_IODATA		0x04bb
 #define	VENDOR_KINGSTON		0x0951
 #define	VENDOR_LANEED		0x056e
@@ -223,6 +224,8 @@ PEGASUS_DEV( "Elsa Micolink USB2Ethernet", VENDOR_ELSA, 0x3000,
 		DEFAULT_GPIO_RESET )
 PEGASUS_DEV( "Hawking UF100 10/100 Ethernet", VENDOR_HAWKING, 0x400c,
 		DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "HP hn210c Ethernet USB", VENDOR_HP, 0x811c,
+		DEFAULT_GPIO_RESET | PEGASUS_II )	
 PEGASUS_DEV( "IO DATA USB ET/TX", VENDOR_IODATA, 0x0904,
 		DEFAULT_GPIO_RESET )
 PEGASUS_DEV( "IO DATA USB ET/TX-S", VENDOR_IODATA, 0x0913,

drivers/usb/net/rtl8150.c

@@ -113,9 +113,11 @@ static void rtl8150_disconnect(struct usb_interface *intf);
 static int rtl8150_probe(struct usb_interface *intf,
 			   const struct usb_device_id *id);
 
+static const char driver_name [] = "rtl8150";
+
 static struct usb_driver rtl8150_driver = {
 	.owner =	THIS_MODULE,
-	.name =		"rtl8150",
+	.name =		driver_name,
 	.probe =	rtl8150_probe,
 	.disconnect =	rtl8150_disconnect,
 	.id_table =	rtl8150_table,
@@ -684,7 +686,7 @@ static int rtl8150_ethtool_ioctl(struct net_device *netdev, void *uaddr)
 	case ETHTOOL_GDRVINFO:{
 		struct ethtool_drvinfo info = { ETHTOOL_GDRVINFO };
 
-		strncpy(info.driver, DRIVER_DESC, ETHTOOL_BUSINFO_LEN);
+		strncpy(info.driver, driver_name, ETHTOOL_BUSINFO_LEN);
 		strncpy(info.version, DRIVER_VERSION, ETHTOOL_BUSINFO_LEN);
 		usb_make_path(dev->udev, info.bus_info, sizeof info.bus_info);
 		if (copy_to_user(uaddr, &info, sizeof(info)))

drivers/usb/storage/transport.c

@@ -48,6 +48,7 @@
 #include <linux/config.h>
 #include "transport.h"
 #include "protocol.h"
+#include "scsiglue.h"
 #include "usb.h"
 #include "debug.h"
 
@@ -303,6 +304,11 @@ static int interpret_urb_result(struct us_data *us, unsigned int pipe,
 		US_DEBUGP("-- device NAKed\n");
 		return USB_STOR_XFER_ERROR;
 
+	/* babble - the device tried to send more than we wanted to read */
+	case -EOVERFLOW:
+		US_DEBUGP("-- Babble\n");
+		return USB_STOR_XFER_LONG;
+
 	/* the transfer was cancelled, presumably by an abort */
 	case -ECONNRESET:
 		US_DEBUGP("-- transfer cancelled\n");
@@ -525,6 +531,12 @@ void usb_stor_invoke_transport(Scsi_Cmnd *srb, struct us_data *us)
 		return;
 	}
 
+	/* if the transport provided its own sense data, don't auto-sense */
+	if (result == USB_STOR_TRANSPORT_NO_SENSE) {
+		srb->result = SAM_STAT_CHECK_CONDITION;
+		return;
+	}
+
 	/* Determine if we need to auto-sense
 	 *
 	 * I normally don't use a flag like this, but it's almost impossible
@@ -764,7 +776,7 @@ int usb_stor_CBI_transport(Scsi_Cmnd *srb, struct us_data *us)
 					srb->request_buffer, transfer_length,
 					srb->use_sg, &srb->resid);
 		US_DEBUGP("CBI data stage result is 0x%x\n", result);
-		if (result == USB_STOR_XFER_ERROR)
+		if (result > USB_STOR_XFER_STALLED)
 			return USB_STOR_TRANSPORT_ERROR;
 	}
 
@@ -854,7 +866,7 @@ int usb_stor_CB_transport(Scsi_Cmnd *srb, struct us_data *us)
 					srb->request_buffer, transfer_length,
 					srb->use_sg, &srb->resid);
 		US_DEBUGP("CB data stage result is 0x%x\n", result);
-		if (result == USB_STOR_XFER_ERROR)
+		if (result > USB_STOR_XFER_STALLED)
 			return USB_STOR_TRANSPORT_ERROR;
 	}
 
@@ -899,6 +911,7 @@ int usb_stor_Bulk_transport(Scsi_Cmnd *srb, struct us_data *us)
 	struct bulk_cs_wrap bcs;
 	unsigned int transfer_length = srb->request_bufflen;
 	int result;
+	int fake_sense = 0;
 
 	/* set up the command wrapper */
 	bcb.Signature = cpu_to_le32(US_BULK_CB_SIGN);
@@ -936,6 +949,15 @@ int usb_stor_Bulk_transport(Scsi_Cmnd *srb, struct us_data *us)
 		US_DEBUGP("Bulk data transfer result 0x%x\n", result);
 		if (result == USB_STOR_XFER_ERROR)
 			return USB_STOR_TRANSPORT_ERROR;
+
+		/* If the device tried to send back more data than the
+		 * amount requested, the spec requires us to transfer
+		 * the CSW anyway.  Since there's no point retrying the
+		 * the command, we'll return fake sense data indicating
+		 * Illegal Request, Invalid Field in CDB.
+		 */
+		if (result == USB_STOR_XFER_LONG)
+			fake_sense = 1;
 	}
 
 	/* See flow chart on pg 15 of the Bulk Only Transport spec for
@@ -975,6 +997,14 @@ int usb_stor_Bulk_transport(Scsi_Cmnd *srb, struct us_data *us)
 	/* based on the status code, we report good or bad */
 	switch (bcs.Status) {
 		case US_BULK_STAT_OK:
+			/* device babbled -- return fake sense data */
+			if (fake_sense) {
+				memcpy(srb->sense_buffer, 
+				       usb_stor_sense_invalidCDB, 
+				       sizeof(usb_stor_sense_invalidCDB));
+				return USB_STOR_TRANSPORT_NO_SENSE;
+			}
+
 			/* command good -- note that data could be short */
 			return USB_STOR_TRANSPORT_GOOD;
 

drivers/usb/storage/transport.h

@@ -122,7 +122,8 @@ struct bulk_cs_wrap {
 #define USB_STOR_XFER_GOOD	0	/* good transfer                 */
 #define USB_STOR_XFER_SHORT	1	/* transferred less than expected */
 #define USB_STOR_XFER_STALLED	2	/* endpoint stalled              */
-#define USB_STOR_XFER_ERROR	3	/* transfer died in the middle   */
+#define USB_STOR_XFER_LONG	3	/* device tried to send too much */
+#define USB_STOR_XFER_ERROR	4	/* transfer died in the middle   */
 
 /*
  * Transport return codes
@@ -130,7 +131,8 @@ struct bulk_cs_wrap {
 
 #define USB_STOR_TRANSPORT_GOOD	   0   /* Transport good, command good	   */
 #define USB_STOR_TRANSPORT_FAILED  1   /* Transport good, command failed   */
-#define USB_STOR_TRANSPORT_ERROR   2   /* Transport bad (i.e. device dead) */
+#define USB_STOR_TRANSPORT_NO_SENSE 2  /* Command failed, no auto-sense    */
+#define USB_STOR_TRANSPORT_ERROR   3   /* Transport bad (i.e. device dead) */
 
 /*
  * We used to have USB_STOR_XFER_ABORTED and USB_STOR_TRANSPORT_ABORTED

drivers/usb/storage/usb.h

@@ -107,6 +107,7 @@ struct us_data {
 	 */
 	struct semaphore	dev_semaphore;	 /* protect pusb_dev */
 	struct usb_device	*pusb_dev;	 /* this usb_device */
+	struct usb_interface	*pusb_intf;	 /* this interface */
 	unsigned long		flags;		 /* from filter initially */
 	unsigned int		send_bulk_pipe;	 /* cached pipe values */
 	unsigned int		recv_bulk_pipe;
@@ -114,7 +115,7 @@ struct us_data {
 	unsigned int		recv_ctrl_pipe;
 	unsigned int		recv_intr_pipe;
 
-	/* information about the device -- always good */
+	/* information about the device */
 	char			vendor[USB_STOR_STRING_LEN];
 	char			product[USB_STOR_STRING_LEN];
 	char			serial[USB_STOR_STRING_LEN];
@@ -124,11 +125,7 @@ struct us_data {
 	u8			protocol;
 	u8			max_lun;
 
-	/* information about the device -- only good if device is attached */
 	u8			ifnum;		 /* interface number   */
-	u8			ep_in;		 /* bulk in endpoint   */
-	u8			ep_out;		 /* bulk out endpoint  */
-	u8			ep_int;		 /* interrupt endpoint */ 
 	u8			ep_bInterval;	 /* interrupt interval */ 
 
 	/* function pointers for this device */

fs/sysfs/file.c

@@ -84,7 +84,7 @@ static int fill_read_buffer(struct file * file, struct sysfs_buffer * buffer)
 	ssize_t count;
 
 	if (!buffer->page)
-		buffer->page = (char *) __get_free_page(GFP_KERNEL);
+		buffer->page = (char *) get_zeroed_page(GFP_KERNEL);
 	if (!buffer->page)
 		return -ENOMEM;
 
@@ -174,7 +174,7 @@ fill_write_buffer(struct sysfs_buffer * buffer, const char * buf, size_t count)
 	int error;
 
 	if (!buffer->page)
-		buffer->page = (char *)__get_free_page(GFP_KERNEL);
+		buffer->page = (char *)get_zeroed_page(GFP_KERNEL);
 	if (!buffer->page)
 		return -ENOMEM;
 

include/linux/cpu.h

@@ -19,7 +19,7 @@
 #ifndef _LINUX_CPU_H_
 #define _LINUX_CPU_H_
 
-#include <linux/device.h>
+#include <linux/sysdev.h>
 #include <linux/node.h>
 #include <asm/semaphore.h>
 
@@ -29,8 +29,6 @@ struct cpu {
 };
 
 extern int register_cpu(struct cpu *, int, struct node *);
-extern struct class cpu_class;
-
 struct notifier_block;
 
 #ifdef CONFIG_SMP
@@ -48,6 +46,7 @@ static inline void unregister_cpu_notifier(struct notifier_block *nb)
 {
 }
 #endif /* CONFIG_SMP */
+extern struct sysdev_class cpu_sysdev_class;
 
 /* Stop CPUs going up and down. */
 extern struct semaphore cpucontrol;

include/linux/cpufreq.h

@@ -205,10 +205,6 @@ struct freq_attr {
 int cpufreq_set_policy(struct cpufreq_policy *policy);
 int cpufreq_get_policy(struct cpufreq_policy *policy, unsigned int cpu);
 
-#ifdef CONFIG_PM
-int cpufreq_restore(void);
-#endif
-
 /* the proc_intf.c needs this */
 int cpufreq_parse_governor (char *str_governor, unsigned int *policy, struct cpufreq_governor **governor);
 

include/linux/device.h

@@ -351,30 +351,6 @@ extern int (*platform_notify_remove)(struct device * dev);
 extern struct device * get_device(struct device * dev);
 extern void put_device(struct device * dev);
 
-/* drivers/base/sys.c */
-
-struct sys_root {
-	u32		id;
-	struct device 	dev;
-	struct device	sysdev;
-};
-
-extern int sys_register_root(struct sys_root *);
-extern void sys_unregister_root(struct sys_root *);
-
-
-struct sys_device {
-	char		* name;
-	u32		id;
-	struct sys_root	* root;
-	struct device	dev;
-	struct class_device class_dev;
-};
-
-extern int sys_device_register(struct sys_device *);
-extern void sys_device_unregister(struct sys_device *);
-
-extern struct bus_type system_bus_type;
 
 /* drivers/base/platform.c */
 

include/linux/kobject.h

@@ -118,6 +118,14 @@ static inline struct kobj_type * get_ktype(struct kobject * k)
 extern struct kobject * kset_find_obj(struct kset *, const char *);
 
 
+/**
+ * Use this when initializing an embedded kset with no other 
+ * fields to initialize.
+ */
+#define set_kset_name(str)	.kset = { .kobj = { .name = str } }
+
+
+
 struct subsystem {
 	struct kset		kset;
 	struct rw_semaphore	rwsem;

include/linux/list.h

@@ -309,6 +309,20 @@ static inline void list_splice_init(struct list_head *list,
 	     pos = list_entry(pos->member.next, typeof(*pos), member),	\
 		     prefetch(pos->member.next))
 
+/**
+ * list_for_each_entry_reverse - iterate backwards over list of given type.
+ * @pos:	the type * to use as a loop counter.
+ * @head:	the head for your list.
+ * @member:	the name of the list_struct within the struct.
+ */
+#define list_for_each_entry_reverse(pos, head, member)			\
+	for (pos = list_entry((head)->prev, typeof(*pos), member),	\
+		     prefetch(pos->member.prev);			\
+	     &pos->member != (head); 					\
+	     pos = list_entry(pos->member.prev, typeof(*pos), member),	\
+		     prefetch(pos->member.prev))
+
+
 /**
  * list_for_each_entry_safe - iterate over list of given type safe against removal of list entry
  * @pos:	the type * to use as a loop counter.

include/linux/node.h

@@ -19,11 +19,11 @@
 #ifndef _LINUX_NODE_H_
 #define _LINUX_NODE_H_
 
-#include <linux/device.h>
+#include <linux/sysdev.h>
 
 struct node {
 	unsigned long cpumap;	/* Bitmap of CPUs on the Node */
-	struct sys_root sysroot;
+	struct sys_device	sysdev;
 };
 
 extern int register_node(struct node *, int, struct node *);

include/linux/sysdev.h

+/**
+ * System devices follow a slightly different driver model. 
+ * They don't need to do dynammic driver binding, can't be probed, 
+ * and don't reside on any type of peripheral bus. 
+ * So, we represent and treat them a little differently.
+ * 
+ * We still have a notion of a driver for a system device, because we still
+ * want to perform basic operations on these devices. 
+ *
+ * We also support auxillary drivers binding to devices of a certain class.
+ * 
+ * This allows configurable drivers to register themselves for devices of
+ * a certain type. And, it allows class definitions to reside in generic
+ * code while arch-specific code can register specific drivers.
+ *
+ * Auxillary drivers registered with a NULL cls are registered as drivers
+ * for all system devices, and get notification calls for each device. 
+ */
+
+
+#ifndef _SYSDEV_H_
+#define _SYSDEV_H_
+
+#include <linux/kobject.h>
+
+
+struct sys_device;
+
+struct sysdev_class {
+	struct list_head	drivers;
+
+	/* Default operations for these types of devices */
+	int	(*shutdown)(struct sys_device *);
+	int	(*save)(struct sys_device *, u32 state);
+	int	(*suspend)(struct sys_device *, u32 state);
+	int	(*resume)(struct sys_device *);
+	int	(*restore)(struct sys_device *);
+	struct kset		kset;
+};
+
+
+extern int sysdev_class_register(struct sysdev_class *);
+extern void sysdev_class_unregister(struct sysdev_class *);
+
+
+/**
+ * Auxillary system device drivers.
+ */
+
+struct sysdev_driver {
+	struct list_head	entry;
+	int	(*add)(struct sys_device *);
+	int	(*remove)(struct sys_device *);
+	int	(*shutdown)(struct sys_device *);
+	int	(*save)(struct sys_device *, u32 state);
+	int	(*suspend)(struct sys_device *, u32 state);
+	int	(*resume)(struct sys_device *);
+	int	(*restore)(struct sys_device *);
+};
+
+
+extern int sysdev_driver_register(struct sysdev_class *, struct sysdev_driver *);
+extern void sysdev_driver_unregister(struct sysdev_class *, struct sysdev_driver *);
+
+
+/**
+ * sys_devices can be simplified a lot from regular devices, because they're
+ * simply not as versatile. 
+ */
+
+struct sys_device {
+	u32		id;
+	struct sysdev_class	* cls;
+	struct kobject		kobj;
+};
+
+extern int sys_device_register(struct sys_device *);
+extern void sys_device_unregister(struct sys_device *);
+
+
+struct sysdev_attribute { 
+	struct attribute	attr;
+	ssize_t (*show)(struct sys_device *, char *);
+	ssize_t (*store)(struct sys_device *, const char *, size_t);
+};
+
+
+#define SYSDEV_ATTR(_name,_mode,_show,_store) 		\
+struct sysdev_attribute attr_##_name = { 			\
+	.attr = {.name = __stringify(_name), .mode = _mode },	\
+	.show	= _show,					\
+	.store	= _store,					\
+};
+
+extern int sysdev_create_file(struct sys_device *, struct sysdev_attribute *);
+extern void sysdev_remove_file(struct sys_device *, struct sysdev_attribute *);
+
+#endif /* _SYSDEV_H_ */

include/linux/usb.h

@@ -136,7 +136,7 @@ static inline void *usb_get_intfdata (struct usb_interface *intf)
 
 static inline void usb_set_intfdata (struct usb_interface *intf, void *data)
 {
-	return dev_set_drvdata (&intf->dev, data);
+	dev_set_drvdata(&intf->dev, data);
 }
 
 /* USB_DT_CONFIG: Configuration descriptor information.

include/linux/usbdevice_fs.h

@@ -46,14 +46,14 @@ struct usbdevfs_ctrltransfer {
 	__u16 wIndex;
 	__u16 wLength;
 	__u32 timeout;  /* in milliseconds */
- 	void *data;
+ 	void __user *data;
 };
 
 struct usbdevfs_bulktransfer {
 	unsigned int ep;
 	unsigned int len;
 	unsigned int timeout; /* in milliseconds */
-	void *data;
+	void __user *data;
 };
 
 struct usbdevfs_setinterface {
@@ -97,7 +97,7 @@ struct usbdevfs_urb {
 	unsigned char endpoint;
 	int status;
 	unsigned int flags;
-	void *buffer;
+	void __user *buffer;
 	int buffer_length;
 	int actual_length;
 	int start_frame;
@@ -113,7 +113,7 @@ struct usbdevfs_ioctl {
 	int	ifno;		/* interface 0..N ; negative numbers reserved */
 	int	ioctl_code;	/* MUST encode size + direction of data so the
 				 * macros in <asm/ioctl.h> give correct values */
-	void	*data;		/* param buffer (in, or out) */
+	void __user *data;	/* param buffer (in, or out) */
 };
 
 /* You can do most things with hubs just through control messages,

kernel/cpufreq.c

@@ -49,8 +49,6 @@ static DECLARE_RWSEM		(cpufreq_notifier_rwsem);
 static LIST_HEAD(cpufreq_governor_list);
 static DECLARE_MUTEX		(cpufreq_governor_sem);
 
-static struct class_interface cpufreq_interface;
-
 static int cpufreq_cpu_get(unsigned int cpu)
 {
 	if (cpu >= NR_CPUS)
@@ -113,24 +111,8 @@ int cpufreq_parse_governor (char *str_governor, unsigned int *policy,
 EXPORT_SYMBOL_GPL(cpufreq_parse_governor);
 
 
-/* forward declarations */
-static int cpufreq_add_dev (struct class_device * dev);
-static void cpufreq_remove_dev (struct class_device * dev);
-
 /* drivers/base/cpu.c */
-extern struct device_class cpu_devclass;
-
-static struct class_interface cpufreq_interface = {
-        .class =	&cpu_class,
-        .add =		&cpufreq_add_dev,
-        .remove =	&cpufreq_remove_dev,
-};
-
-static inline int to_cpu_nr (struct class_device *dev)
-{
-	struct sys_device * cpu_sys_dev = container_of(dev->dev, struct sys_device, dev);
-	return (cpu_sys_dev->id);
-}
+extern struct sysdev_class cpu_sysdev_class;
 
 
 /**
@@ -331,9 +313,9 @@ static struct kobj_type ktype_cpufreq = {
  *
  * Adds the cpufreq interface for a CPU device. 
  */
-static int cpufreq_add_dev (struct class_device * class_dev)
+static int cpufreq_add_dev (struct sys_device * sys_dev)
 {
-	unsigned int cpu = to_cpu_nr(class_dev);
+	unsigned int cpu = sys_dev->id;
 	int ret = 0;
 	struct cpufreq_policy new_policy;
 	struct cpufreq_policy *policy;
@@ -358,14 +340,12 @@ static int cpufreq_add_dev (struct class_device * class_dev)
 	memcpy(&new_policy, 
 	       policy, 
 	       sizeof(struct cpufreq_policy));
-	class_set_devdata(class_dev, policy);
 	up(&cpufreq_driver_sem);
 
 	init_MUTEX(&policy->lock);
 	/* prepare interface data */
-	policy->kobj.parent = &class_dev->kobj;
+	policy->kobj.parent = &sys_dev->kobj;
 	policy->kobj.ktype = &ktype_cpufreq;
-//	policy->dev = dev->dev;
 	strlcpy(policy->kobj.name, "cpufreq", KOBJ_NAME_LEN);
 
 	ret = kobject_register(&policy->kobj);
@@ -396,12 +376,12 @@ static int cpufreq_add_dev (struct class_device * class_dev)
  *
  * Removes the cpufreq interface for a CPU device.
  */
-static void cpufreq_remove_dev (struct class_device * class_dev)
+static int cpufreq_remove_dev (struct sys_device * sys_dev)
 {
-	unsigned int cpu = to_cpu_nr(class_dev);
+	unsigned int cpu = sys_dev->id;
 
 	if (!kobject_get(&cpufreq_driver->policy[cpu].kobj))
-		return;
+		return -EFAULT;
 
 	down(&cpufreq_driver_sem);
 	if ((cpufreq_driver->target) && 
@@ -421,9 +401,17 @@ static void cpufreq_remove_dev (struct class_device * class_dev)
 
 	up(&cpufreq_driver_sem);
 	kobject_put(&cpufreq_driver->policy[cpu].kobj);
-	return;
+	return 0;
 }
 
+static int cpufreq_restore(struct sys_device *);
+
+static struct sysdev_driver cpufreq_sysdev_driver = {
+	.add		= cpufreq_add_dev,
+	.remove		= cpufreq_remove_dev,
+	.restore	= cpufreq_restore,
+};
+
 
 /*********************************************************************
  *                     NOTIFIER LISTS INTERFACE                      *
@@ -843,7 +831,7 @@ int cpufreq_register_driver(struct cpufreq_driver *driver_data)
 
 	memset(cpufreq_driver->policy, 0, NR_CPUS * sizeof(struct cpufreq_policy));
 
-	return class_interface_register(&cpufreq_interface);
+	return sysdev_driver_register(&cpu_sysdev_class,&cpufreq_sysdev_driver);
 }
 EXPORT_SYMBOL_GPL(cpufreq_register_driver);
 
@@ -861,7 +849,7 @@ int cpufreq_unregister_driver(struct cpufreq_driver *driver)
 	if (!cpufreq_driver || (driver != cpufreq_driver))
 		return -EINVAL;
 
-	class_interface_unregister(&cpufreq_interface);
+	sysdev_driver_unregister(&cpu_sysdev_class, &cpufreq_sysdev_driver);
 
 	down(&cpufreq_driver_sem);
 	kfree(cpufreq_driver->policy);
@@ -874,41 +862,34 @@ EXPORT_SYMBOL_GPL(cpufreq_unregister_driver);
 
 
 #ifdef CONFIG_PM
+
 /**
  *	cpufreq_restore - restore the CPU clock frequency after resume
  *
  *	Restore the CPU clock frequency so that our idea of the current
  *	frequency reflects the actual hardware.
  */
-int cpufreq_restore(void)
+static int cpufreq_restore(struct sys_device * sysdev)
 {
-	struct cpufreq_policy policy;
-	unsigned int i;
+	int cpu = sysdev->id;
 	unsigned int ret = 0;
+	struct cpufreq_policy policy;
 
-	if (in_interrupt())
-		panic("cpufreq_restore() called from interrupt context!");
-
-	if (!try_module_get(cpufreq_driver->owner))
-		goto error_out;
-
-	for (i=0;i<NR_CPUS;i++) {
-		if (!cpu_online(i) || !cpufreq_cpu_get(i))
-			continue;
-
+	if (cpu_online(cpu) && cpufreq_cpu_get(cpu)) {
 		down(&cpufreq_driver_sem);
-		memcpy(&policy, &cpufreq_driver->policy[i], sizeof(struct cpufreq_policy));
+		memcpy(&policy, &cpufreq_driver->policy[cpu], 
+		       sizeof(struct cpufreq_policy));
 		up(&cpufreq_driver_sem);
-		ret += cpufreq_set_policy(&policy);
-
-		cpufreq_cpu_put(i);
+		ret = cpufreq_set_policy(&policy);
+		cpufreq_cpu_put(cpu);
 	}
 
-	module_put(cpufreq_driver->owner);
- error_out:
 	return ret;
 }
-EXPORT_SYMBOL_GPL(cpufreq_restore);
+
 #else
-#define cpufreq_restore() do {} while (0)
+static int cpufreq_restore(struct sys_device * sysdev)
+{
+	return 0;
+}
 #endif /* CONFIG_PM */