Skip to content

L
linux
Commit 3995f4c5 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge master.kernel.org:/home/rmk/linux-2.6-arm

parents 05814450 fe38ea56
Show whitespace changes
Inline Side-by-side
Showing with 3346 additions and 4957 deletions
arch/arm/Kconfig
View file @ 3995f4c5
......@@ -99,13 +99,6 @@ config ARCH_EBSA110
Ethernet interface, two PCMCIA sockets, two serial ports and a
parallel port.
config ARCH_CAMELOT
bool "Epxa10db"
help
This enables support for Altera's Excalibur XA10 development board.
If you would like to build your kernel to run on one of these boards
then you must say 'Y' here. Otherwise say 'N'
config ARCH_FOOTBRIDGE
bool "FootBridge"
select FOOTBRIDGE
......@@ -213,12 +206,16 @@ config ARCH_AAEC2000
help
This enables support for systems based on the Agilent AAEC-2000
config ARCH_AT91RM9200
bool "AT91RM9200"
help
Say Y here if you intend to run this kernel on an AT91RM9200-based
board.
endchoice
source "arch/arm/mach-clps711x/Kconfig"
source "arch/arm/mach-epxa10db/Kconfig"
source "arch/arm/mach-footbridge/Kconfig"
source "arch/arm/mach-integrator/Kconfig"
......@@ -253,6 +250,8 @@ source "arch/arm/mach-aaec2000/Kconfig"
source "arch/arm/mach-realview/Kconfig"
source "arch/arm/mach-at91rm9200/Kconfig"
# Definitions to make life easier
config ARCH_ACORN
bool
......@@ -418,7 +417,8 @@ config LEDS
ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \
ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE
ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
ARCH_AT91RM9200
help
If you say Y here, the LEDs on your machine will be used
to provide useful information about your current system status.
......
arch/arm/Makefile
View file @ 3995f4c5
......@@ -84,7 +84,6 @@ endif
machine-$(CONFIG_ARCH_PXA) := pxa
machine-$(CONFIG_ARCH_L7200) := l7200
machine-$(CONFIG_ARCH_INTEGRATOR) := integrator
machine-$(CONFIG_ARCH_CAMELOT) := epxa10db
textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000
machine-$(CONFIG_ARCH_CLPS711X) := clps711x
machine-$(CONFIG_ARCH_IOP3XX) := iop3xx
......@@ -100,6 +99,7 @@ endif
machine-$(CONFIG_ARCH_H720X) := h720x
machine-$(CONFIG_ARCH_AAEC2000) := aaec2000
machine-$(CONFIG_ARCH_REALVIEW) := realview
machine-$(CONFIG_ARCH_AT91RM9200) := at91rm9200
ifeq ($(CONFIG_ARCH_EBSA110),y)
# This is what happens if you forget the IOCS16 line.
......
arch/arm/boot/compressed/Makefile
View file @ 3995f4c5
......@@ -21,10 +21,6 @@ ifeq ($(CONFIG_ARCH_SHARK),y)
OBJS += head-shark.o ofw-shark.o
endif
ifeq ($(CONFIG_ARCH_CAMELOT),y)
OBJS += head-epxa10db.o
endif
ifeq ($(CONFIG_ARCH_L7200),y)
OBJS += head-l7200.o
endif
......@@ -50,6 +46,10 @@ ifeq ($(CONFIG_PXA_SHARPSL),y)
OBJS += head-sharpsl.o
endif
ifeq ($(CONFIG_ARCH_AT91RM9200),y)
OBJS += head-at91rm9200.o
endif
ifeq ($(CONFIG_DEBUG_ICEDCC),y)
OBJS += ice-dcc.o
endif
......
arch/arm/boot/compressed/head-at91rm9200.S 0 → 100644
View file @ 3995f4c5
/*
* linux/arch/arm/boot/compressed/head-at91rm9200.S
*
* Copyright (C) 2003 SAN People
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*/
#include <asm/mach-types.h>
.section ".start", "ax"
@ Atmel AT91RM9200-DK : 262
mov r3, #(MACH_TYPE_AT91RM9200DK & 0xff)
orr r3, r3, #(MACH_TYPE_AT91RM9200DK & 0xff00)
cmp r7, r3
beq 99f
@ Cogent CSB337 : 399
mov r3, #(MACH_TYPE_CSB337 & 0xff)
orr r3, r3, #(MACH_TYPE_CSB337 & 0xff00)
cmp r7, r3
beq 99f
@ Cogent CSB637 : 648
mov r3, #(MACH_TYPE_CSB637 & 0xff)
orr r3, r3, #(MACH_TYPE_CSB637 & 0xff00)
cmp r7, r3
beq 99f
@ Atmel AT91RM9200-EK : 705
mov r3, #(MACH_TYPE_AT91RM9200EK & 0xff)
orr r3, r3, #(MACH_TYPE_AT91RM9200EK & 0xff00)
cmp r7, r3
beq 99f
@ Conitec Carmeva : 769
mov r3, #(MACH_TYPE_CARMEVA & 0xff)
orr r3, r3, #(MACH_TYPE_CARMEVA & 0xff00)
cmp r7, r3
beq 99f
@ KwikByte KB920x : 612
mov r3, #(MACH_TYPE_KB9200 & 0xff)
orr r3, r3, #(MACH_TYPE_KB9200 & 0xff00)
cmp r7, r3
beq 99f
@ Unknown board, use the AT91RM9200DK board
@ mov r7, #MACH_TYPE_AT91RM9200
mov r7, #(MACH_TYPE_AT91RM9200DK & 0xff)
orr r7, r7, #(MACH_TYPE_AT91RM9200DK & 0xff00)
99:
arch/arm/boot/compressed/head-epxa10db.S deleted 100644 → 0
View file @ 05814450
#include <asm/mach-types.h>
#include <asm/arch/excalibur.h>
.section ".start", "ax"
mov r7, #MACH_TYPE_CAMELOT
arch/arm/configs/assabet_defconfig
View file @ 3995f4c5
......@@ -63,7 +63,6 @@ CONFIG_OBSOLETE_MODPARM=y
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
......
arch/arm/configs/badge4_defconfig
View file @ 3995f4c5
......@@ -66,7 +66,6 @@ CONFIG_KMOD=y
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
......
arch/arm/configs/bast_defconfig
View file @ 3995f4c5
......@@ -64,7 +64,6 @@ CONFIG_KMOD=y
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
......
arch/arm/configs/cerfcube_defconfig
View file @ 3995f4c5
......@@ -65,7 +65,6 @@ CONFIG_KMOD=y
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
......
arch/arm/configs/clps7500_defconfig
View file @ 3995f4c5
......@@ -57,7 +57,6 @@ CONFIG_ARCH_CLPS7500=y
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
......
arch/arm/configs/collie_defconfig
View file @ 3995f4c5
......@@ -71,7 +71,6 @@ CONFIG_KMOD=y
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
......
arch/arm/configs/corgi_defconfig
View file @ 3995f4c5
......@@ -87,7 +87,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
......
arch/arm/configs/ebsa110_defconfig
View file @ 3995f4c5
......@@ -63,7 +63,6 @@ CONFIG_KMOD=y
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
CONFIG_ARCH_EBSA110=y
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
......
arch/arm/configs/edb7211_defconfig
View file @ 3995f4c5
......@@ -57,7 +57,6 @@ CONFIG_BASE_SMALL=0
CONFIG_ARCH_CLPS711X=y
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
......
arch/arm/configs/enp2611_defconfig
View file @ 3995f4c5
......@@ -86,7 +86,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
......
arch/arm/configs/ep80219_defconfig
View file @ 3995f4c5
......@@ -64,7 +64,6 @@ CONFIG_KMOD=y
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
CONFIG_ARCH_IOP3XX=y
......
arch/arm/configs/epxa10db_defconfig deleted 100644 → 0
View file @ 05814450
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.12-rc1-bk2
# Sun Mar 27 22:46:51 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_IOMAP=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_KMOD is not set
#
# System Type
#
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
CONFIG_ARCH_CAMELOT=y
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
#
# Epxa10db
#
#
# PLD hotswap support
#
CONFIG_PLD=y
# CONFIG_PLD_HOTSWAP is not set
#
# Processor Type
#
CONFIG_CPU_32=y
CONFIG_CPU_ARM922T=y
CONFIG_CPU_32v4=y
CONFIG_CPU_ABRT_EV4T=y
CONFIG_CPU_CACHE_V4WT=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_V4WB=y
CONFIG_CPU_TLB_V4WBI=y
#
# Processor Features
#
# CONFIG_ARM_THUMB is not set
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
#
# Bus support
#
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# Kernel Features
#
# CONFIG_PREEMPT is not set
CONFIG_ALIGNMENT_TRAP=y
#
# Boot options
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="mem=32M console=ttyUA0,115200 initrd=0x00200000,8M root=/dev/ram0 rw"
# CONFIG_XIP_KERNEL is not set
#
# Floating point emulation
#
#
# At least one emulation must be selected
#
CONFIG_FPE_NWFPE=y
# CONFIG_FPE_NWFPE_XP is not set
# CONFIG_FPE_FASTFPE is not set
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_ARTHUR is not set
#
# Power management options
#
# CONFIG_PM is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# SCSI device support
#
# CONFIG_SCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
#
# IEEE 1394 (FireWire) support
#
#
# I2O device support
#
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
# CONFIG_IP_PNP_DHCP is not set
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_IP_TCPDIAG is not set
# CONFIG_IP_TCPDIAG_IPV6 is not set
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# Ethernet (10 or 100Mbit)
#
# CONFIG_NET_ETHERNET is not set
#
# Ethernet (1000 Mbit)
#
#
# Ethernet (10000 Mbit)
#
#
# Token Ring devices
#
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
CONFIG_PPP=y
CONFIG_PPP_MULTILINK=y
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=y
CONFIG_PPP_SYNC_TTY=y
CONFIG_PPP_DEFLATE=y
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_PPPOE is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_UART00=y
CONFIG_SERIAL_UART00_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# Misc devices
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
# CONFIG_FB is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB is not set
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
CONFIG_SMB_FS=y
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_FRAME_POINTER=y
# CONFIG_DEBUG_USER is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
#
# Hardware crypto devices
#
#
# Library routines
#
CONFIG_CRC_CCITT=y
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
arch/arm/configs/footbridge_defconfig
View file @ 3995f4c5
......@@ -63,7 +63,6 @@ CONFIG_KMOD=y
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
CONFIG_ARCH_FOOTBRIDGE=y
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
......
arch/arm/configs/fortunet_defconfig
View file @ 3995f4c5
......@@ -57,7 +57,6 @@ CONFIG_BASE_SMALL=0
CONFIG_ARCH_CLPS711X=y
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
......
arch/arm/configs/h3600_defconfig
View file @ 3995f4c5
......@@ -65,7 +65,6 @@ CONFIG_OBSOLETE_MODPARM=y
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
......
arch/arm/configs/h7201_defconfig
View file @ 3995f4c5
......@@ -60,7 +60,6 @@ CONFIG_KMOD=y
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
......
arch/arm/configs/h7202_defconfig
View file @ 3995f4c5
......@@ -63,7 +63,6 @@ CONFIG_KMOD=y
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
......
arch/arm/configs/hackkit_defconfig
View file @ 3995f4c5
......@@ -66,7 +66,6 @@ CONFIG_KMOD=y
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
......
arch/arm/configs/integrator_defconfig
View file @ 3995f4c5
......@@ -65,7 +65,6 @@ CONFIG_KMOD=y
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
CONFIG_ARCH_INTEGRATOR=y
# CONFIG_ARCH_IOP3XX is not set
......
arch/arm/configs/iq31244_defconfig
View file @ 3995f4c5
......@@ -65,7 +65,6 @@ CONFIG_KMOD=y
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
CONFIG_ARCH_IOP3XX=y
......
arch/arm/configs/iq80321_defconfig
View file @ 3995f4c5
......@@ -64,7 +64,6 @@ CONFIG_KMOD=y
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
CONFIG_ARCH_IOP3XX=y
......
arch/arm/configs/iq80331_defconfig
View file @ 3995f4c5
......@@ -64,7 +64,6 @@ CONFIG_KMOD=y
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
CONFIG_ARCH_IOP3XX=y
......
arch/arm/configs/iq80332_defconfig
View file @ 3995f4c5
......@@ -64,7 +64,6 @@ CONFIG_KMOD=y
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
CONFIG_ARCH_IOP3XX=y
......
arch/arm/configs/ixdp2400_defconfig
View file @ 3995f4c5
......@@ -86,7 +86,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
......
arch/arm/configs/ixdp2401_defconfig
View file @ 3995f4c5
......@@ -86,7 +86,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
......
arch/arm/configs/ixdp2800_defconfig
View file @ 3995f4c5
......@@ -86,7 +86,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
......
arch/arm/configs/ixdp2801_defconfig
View file @ 3995f4c5
......@@ -86,7 +86,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
......
arch/arm/configs/ixp4xx_defconfig
View file @ 3995f4c5
......@@ -85,7 +85,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
......
arch/arm/configs/jornada720_defconfig
View file @ 3995f4c5
......@@ -63,7 +63,6 @@ CONFIG_KMOD=y
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
......
arch/arm/configs/lart_defconfig
View file @ 3995f4c5
......@@ -62,7 +62,6 @@ CONFIG_KMOD=y
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
......
arch/arm/configs/lpd7a400_defconfig
View file @ 3995f4c5
......@@ -60,7 +60,6 @@ CONFIG_BASE_SMALL=0
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
......
arch/arm/configs/lpd7a404_defconfig
View file @ 3995f4c5
......@@ -60,7 +60,6 @@ CONFIG_BASE_SMALL=0
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
......
arch/arm/configs/lubbock_defconfig
View file @ 3995f4c5
......@@ -63,7 +63,6 @@ CONFIG_OBSOLETE_MODPARM=y
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
......
arch/arm/configs/lusl7200_defconfig
View file @ 3995f4c5
......@@ -62,7 +62,6 @@ CONFIG_KMOD=y
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
......
arch/arm/configs/mainstone_defconfig
View file @ 3995f4c5
......@@ -63,7 +63,6 @@ CONFIG_OBSOLETE_MODPARM=y
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
......
arch/arm/configs/mx1ads_defconfig
View file @ 3995f4c5
......@@ -63,7 +63,6 @@ CONFIG_KMOD=y
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
......
arch/arm/configs/neponset_defconfig
View file @ 3995f4c5
......@@ -65,7 +65,6 @@ CONFIG_OBSOLETE_MODPARM=y
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
......
arch/arm/configs/netwinder_defconfig
View file @ 3995f4c5
......@@ -58,7 +58,6 @@ CONFIG_BASE_SMALL=0
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
CONFIG_ARCH_FOOTBRIDGE=y
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
......
arch/arm/configs/omap_h2_1610_defconfig
View file @ 3995f4c5
......@@ -85,7 +85,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
......
arch/arm/configs/pleb_defconfig
View file @ 3995f4c5
......@@ -63,7 +63,6 @@ CONFIG_KMOD=y
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
......
arch/arm/configs/pxa255-idp_defconfig
View file @ 3995f4c5
......@@ -63,7 +63,6 @@ CONFIG_OBSOLETE_MODPARM=y
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
......
arch/arm/configs/realview_defconfig
View file @ 3995f4c5
......@@ -65,7 +65,6 @@ CONFIG_OBSOLETE_MODPARM=y
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
......
arch/arm/configs/rpc_defconfig
View file @ 3995f4c5
......@@ -66,7 +66,6 @@ CONFIG_KMOD=y
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
......
arch/arm/configs/s3c2410_defconfig
View file @ 3995f4c5
......@@ -85,7 +85,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
......
arch/arm/configs/shannon_defconfig
View file @ 3995f4c5
......@@ -62,7 +62,6 @@ CONFIG_OBSOLETE_MODPARM=y
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
......
arch/arm/configs/shark_defconfig
View file @ 3995f4c5
......@@ -66,7 +66,6 @@ CONFIG_KMOD=y
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
......
arch/arm/configs/simpad_defconfig
View file @ 3995f4c5
......@@ -64,7 +64,6 @@ CONFIG_KMOD=y
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
......
arch/arm/configs/smdk2410_defconfig
View file @ 3995f4c5
......@@ -58,7 +58,6 @@ CONFIG_BASE_SMALL=0
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
......
arch/arm/configs/spitz_defconfig
View file @ 3995f4c5
......@@ -87,7 +87,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
......
arch/arm/configs/versatile_defconfig
View file @ 3995f4c5
......@@ -64,7 +64,6 @@ CONFIG_KMOD=y
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
......
arch/arm/kernel/irq.c
View file @ 3995f4c5
......@@ -710,7 +710,8 @@ int setup_irq(unsigned int irq, struct irqaction *new)
desc->pending = 0;
desc->disable_depth = 1;
if (new->flags & SA_TRIGGER_MASK) {
if (new->flags & SA_TRIGGER_MASK &&
desc->chip->set_type) {
unsigned int type = new->flags & SA_TRIGGER_MASK;
desc->chip->set_type(irq, type);
}
......
arch/arm/mach-at91rm9200/Kconfig 0 → 100644
View file @ 3995f4c5
if ARCH_AT91RM9200
menu "AT91RM9200 Implementations"
comment "AT91RM9200 Board Type"
config ARCH_AT91RM9200DK
bool "Atmel AT91RM9200-DK Development board"
depends on ARCH_AT91RM9200
help
Select this if you are using Atmel's AT91RM9200-DK Development board
config MACH_AT91RM9200EK
bool "Atmel AT91RM9200-EK Evaluation Kit"
depends on ARCH_AT91RM9200
help
Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit
config MACH_CSB337
bool "Cogent CSB337 board"
depends on ARCH_AT91RM9200
help
Select this if you are using Cogent's CSB337 board
config MACH_CSB637
bool "Cogent CSB637 board"
depends on ARCH_AT91RM9200
help
Select this if you are using Cogent's CSB637 board
config MACH_CARMEVA
bool "Conitec's ARM&EVA"
depends on ARCH_AT91RM9200
help
Select this if you are using Conitec's AT91RM9200-MCU-Module
config MACH_KB9200
bool "KwikByte's KB920x"
depends on ARCH_AT91RM9200
help
Select this if you are using KwikByte's KB920x board
comment "AT91RM9200 Feature Selections"
config AT91_PROGRAMMABLE_CLOCKS
bool "Programmable Clocks"
help
Select this if you need to program one or more of the PCK0..PCK3
programmable clock outputs.
endmenu
endif
arch/arm/mach-at91rm9200/Makefile 0 → 100644
View file @ 3995f4c5
#
# Makefile for the linux kernel.
#
obj-y := clock.o irq.o time.o gpio.o common.o devices.o
obj-m :=
obj-n :=
obj- :=
# Board-specific support
#obj-$(CONFIG_ARCH_AT91RM9200DK) += board-dk.o
#obj-$(CONFIG_MACH_AT91RM9200EK) += board-ek.o
#obj-$(CONFIG_MACH_CSB337) += board-csb337.o
#obj-$(CONFIG_MACH_CSB637) += board-csb637.o
#obj-$(CONFIG_MACH_CARMEVA) += board-carmeva.o
#obj-$(CONFIG_MACH_KB9200) += board-kb9202.o
# LEDs support
#led-$(CONFIG_ARCH_AT91RM9200DK) += leds.o
#led-$(CONFIG_MACH_AT91RM9200EK) += leds.o
#led-$(CONFIG_MACH_CSB337) += leds.o
#led-$(CONFIG_MACH_CSB637) += leds.o
#led-$(CONFIG_MACH_KB9200) += leds.o
obj-$(CONFIG_LEDS) += $(led-y)
# VGA support
#obj-$(CONFIG_FB_S1D13XXX) += ics1523.o
arch/arm/mach-at91rm9200/Makefile.boot 0 → 100644
View file @ 3995f4c5
# Note: the following conditions must always be true:
# ZRELADDR == virt_to_phys(TEXTADDR)
# PARAMS_PHYS must be within 4MB of ZRELADDR
# INITRD_PHYS must be in RAM
zreladdr-y := 0x20008000
params_phys-y := 0x20000100
initrd_phys-y := 0x20410000
arch/arm/mach-at91rm9200/clock.c 0 → 100644
View file @ 3995f4c5
/*
* linux/arch/arm/mach-at91rm9200/clock.c
*
* Copyright (C) 2005 David Brownell
* Copyright (C) 2005 Ivan Kokshaysky
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/spinlock.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <asm/semaphore.h>
#include <asm/io.h>
#include <asm/mach-types.h>
#include <asm/arch/hardware.h>
#include <asm/arch/board.h> /* for master clock global */
#include "generic.h"
#undef DEBUG
/*
* There's a lot more which can be done with clocks, including cpufreq
* integration, slow clock mode support (for system suspend), letting
* PLLB be used at other rates (on boards that don't need USB), etc.
*/
struct clk {
const char *name;
unsigned long rate_hz;
struct clk *parent;
u32 pmc_mask;
void (*mode)(struct clk *, int);
unsigned id:2; /* PCK0..3, or 32k/main/a/b */
unsigned primary:1;
unsigned pll:1;
unsigned programmable:1;
u16 users;
};
static spinlock_t clk_lock;
static u32 at91_pllb_usb_init;
/*
* Four primary clock sources: two crystal oscillators (32K, main), and
* two PLLs. PLLA usually runs the master clock; and PLLB must run at
* 48 MHz (unless no USB function clocks are needed). The main clock and
* both PLLs are turned off to run in "slow clock mode" (system suspend).
*/
static struct clk clk32k = {
.name = "clk32k",
.rate_hz = AT91_SLOW_CLOCK,
.users = 1, /* always on */
.id = 0,
.primary = 1,
};
static struct clk main_clk = {
.name = "main",
.pmc_mask = 1 << 0, /* in PMC_SR */
.users = 1,
.id = 1,
.primary = 1,
};
static struct clk plla = {
.name = "plla",
.parent = &main_clk,
.pmc_mask = 1 << 1, /* in PMC_SR */
.id = 2,
.primary = 1,
.pll = 1,
};
static void pllb_mode(struct clk *clk, int is_on)
{
u32 value;
if (is_on) {
is_on = AT91_PMC_LOCKB;
value = at91_pllb_usb_init;
} else
value = 0;
at91_sys_write(AT91_CKGR_PLLBR, value);
do {
cpu_relax();
} while ((at91_sys_read(AT91_PMC_SR) & AT91_PMC_LOCKB) != is_on);
}
static struct clk pllb = {
.name = "pllb",
.parent = &main_clk,
.pmc_mask = 1 << 2, /* in PMC_SR */
.mode = pllb_mode,
.id = 3,
.primary = 1,
.pll = 1,
};
static void pmc_sys_mode(struct clk *clk, int is_on)
{
if (is_on)
at91_sys_write(AT91_PMC_SCER, clk->pmc_mask);
else
at91_sys_write(AT91_PMC_SCDR, clk->pmc_mask);
}
/* USB function clocks (PLLB must be 48 MHz) */
static struct clk udpck = {
.name = "udpck",
.parent = &pllb,
.pmc_mask = AT91_PMC_UDP,
.mode = pmc_sys_mode,
};
static struct clk uhpck = {
.name = "uhpck",
.parent = &pllb,
.pmc_mask = AT91_PMC_UHP,
.mode = pmc_sys_mode,
};
#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
/*
* The four programmable clocks can be parented by any primary clock.
* You must configure pin multiplexing to bring these signals out.
*/
static struct clk pck0 = {
.name = "pck0",
.pmc_mask = AT91_PMC_PCK0,
.mode = pmc_sys_mode,
.programmable = 1,
.id = 0,
};
static struct clk pck1 = {
.name = "pck1",
.pmc_mask = AT91_PMC_PCK1,
.mode = pmc_sys_mode,
.programmable = 1,
.id = 1,
};
static struct clk pck2 = {
.name = "pck2",
.pmc_mask = AT91_PMC_PCK2,
.mode = pmc_sys_mode,
.programmable = 1,
.id = 2,
};
static struct clk pck3 = {
.name = "pck3",
.pmc_mask = AT91_PMC_PCK3,
.mode = pmc_sys_mode,
.programmable = 1,
.id = 3,
};
#endif /* CONFIG_AT91_PROGRAMMABLE_CLOCKS */
/*
* The master clock is divided from the CPU clock (by 1-4). It's used for
* memory, interfaces to on-chip peripherals, the AIC, and sometimes more
* (e.g baud rate generation). It's sourced from one of the primary clocks.
*/
static struct clk mck = {
.name = "mck",
.pmc_mask = 1 << 3, /* in PMC_SR */
.users = 1, /* (must be) always on */
};
static void pmc_periph_mode(struct clk *clk, int is_on)
{
if (is_on)
at91_sys_write(AT91_PMC_PCER, clk->pmc_mask);
else
at91_sys_write(AT91_PMC_PCDR, clk->pmc_mask);
}
static struct clk udc_clk = {
.name = "udc_clk",
.parent = &mck,
.pmc_mask = 1 << AT91_ID_UDP,
.mode = pmc_periph_mode,
};
static struct clk ohci_clk = {
.name = "ohci_clk",
.parent = &mck,
.pmc_mask = 1 << AT91_ID_UHP,
.mode = pmc_periph_mode,
};
static struct clk *const clock_list[] = {
/* four primary clocks -- MUST BE FIRST! */
&clk32k,
&main_clk,
&plla,
&pllb,
/* PLLB children (USB) */
&udpck,
&uhpck,
#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
/* programmable clocks */
&pck0,
&pck1,
&pck2,
&pck3,
#endif /* CONFIG_AT91_PROGRAMMABLE_CLOCKS */
/* MCK and peripherals */
&mck,
// usart0..usart3
// mmc
&udc_clk,
// i2c
// spi
// ssc0..ssc2
// tc0..tc5
&ohci_clk,
// ether
};
/* clocks are all static for now; no refcounting necessary */
struct clk *clk_get(struct device *dev, const char *id)
{
int i;
for (i = 0; i < ARRAY_SIZE(clock_list); i++) {
if (strcmp(id, clock_list[i]->name) == 0)
return clock_list[i];
}
return ERR_PTR(-ENOENT);
}
EXPORT_SYMBOL(clk_get);
void clk_put(struct clk *clk)
{
}
EXPORT_SYMBOL(clk_put);
static void __clk_enable(struct clk *clk)
{
if (clk->parent)
__clk_enable(clk->parent);
if (clk->users++ == 0 && clk->mode)
clk->mode(clk, 1);
}
int clk_enable(struct clk *clk)
{
unsigned long flags;
spin_lock_irqsave(&clk_lock, flags);
__clk_enable(clk);
spin_unlock_irqrestore(&clk_lock, flags);
return 0;
}
EXPORT_SYMBOL(clk_enable);
static void __clk_disable(struct clk *clk)
{
BUG_ON(clk->users == 0);
if (--clk->users == 0 && clk->mode)
clk->mode(clk, 0);
if (clk->parent)
__clk_disable(clk->parent);
}
void clk_disable(struct clk *clk)
{
unsigned long flags;
spin_lock_irqsave(&clk_lock, flags);
__clk_disable(clk);
spin_unlock_irqrestore(&clk_lock, flags);
}
EXPORT_SYMBOL(clk_disable);
unsigned long clk_get_rate(struct clk *clk)
{
unsigned long flags;
unsigned long rate;
spin_lock_irqsave(&clk_lock, flags);
for (;;) {
rate = clk->rate_hz;
if (rate || !clk->parent)
break;
clk = clk->parent;
}
spin_unlock_irqrestore(&clk_lock, flags);
return rate;
}
EXPORT_SYMBOL(clk_get_rate);
/*------------------------------------------------------------------------*/
#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
/*
* For now, only the programmable clocks support reparenting (MCK could
* do this too, with care) or rate changing (the PLLs could do this too,
* ditto MCK but that's more for cpufreq). Drivers may reparent to get
* a better rate match; we don't.
*/
long clk_round_rate(struct clk *clk, unsigned long rate)
{
unsigned long flags;
unsigned prescale;
unsigned long actual;
if (!clk->programmable)
return -EINVAL;
spin_lock_irqsave(&clk_lock, flags);
actual = clk->parent->rate_hz;
for (prescale = 0; prescale < 7; prescale++) {
if (actual && actual <= rate)
break;
actual >>= 1;
}
spin_unlock_irqrestore(&clk_lock, flags);
return (prescale < 7) ? actual : -ENOENT;
}
EXPORT_SYMBOL(clk_round_rate);
int clk_set_rate(struct clk *clk, unsigned long rate)
{
unsigned long flags;
unsigned prescale;
unsigned long actual;
if (!clk->programmable)
return -EINVAL;
if (clk->users)
return -EBUSY;
spin_lock_irqsave(&clk_lock, flags);
actual = clk->parent->rate_hz;
for (prescale = 0; prescale < 7; prescale++) {
if (actual && actual <= rate) {
u32 pckr;
pckr = at91_sys_read(AT91_PMC_PCKR(clk->id));
pckr &= 0x03;
pckr |= prescale << 2;
at91_sys_write(AT91_PMC_PCKR(clk->id), pckr);
clk->rate_hz = actual;
break;
}
actual >>= 1;
}
spin_unlock_irqrestore(&clk_lock, flags);
return (prescale < 7) ? actual : -ENOENT;
}
EXPORT_SYMBOL(clk_set_rate);
struct clk *clk_get_parent(struct clk *clk)
{
return clk->parent;
}
EXPORT_SYMBOL(clk_get_parent);
int clk_set_parent(struct clk *clk, struct clk *parent)
{
unsigned long flags;
if (clk->users)
return -EBUSY;
if (!parent->primary || !clk->programmable)
return -EINVAL;
spin_lock_irqsave(&clk_lock, flags);
clk->rate_hz = parent->rate_hz;
clk->parent = parent;
at91_sys_write(AT91_PMC_PCKR(clk->id), parent->id);
spin_unlock_irqrestore(&clk_lock, flags);
return 0;
}
EXPORT_SYMBOL(clk_set_parent);
#endif /* CONFIG_AT91_PROGRAMMABLE_CLOCKS */
/*------------------------------------------------------------------------*/
#ifdef CONFIG_DEBUG_FS
static int at91_clk_show(struct seq_file *s, void *unused)
{
u32 scsr, pcsr, sr;
unsigned i;
seq_printf(s, "SCSR = %8x\n", scsr = at91_sys_read(AT91_PMC_SCSR));
seq_printf(s, "PCSR = %8x\n", pcsr = at91_sys_read(AT91_PMC_PCSR));
seq_printf(s, "MOR = %8x\n", at91_sys_read(AT91_CKGR_MOR));
seq_printf(s, "MCFR = %8x\n", at91_sys_read(AT91_CKGR_MCFR));
seq_printf(s, "PLLA = %8x\n", at91_sys_read(AT91_CKGR_PLLAR));
seq_printf(s, "PLLB = %8x\n", at91_sys_read(AT91_CKGR_PLLBR));
seq_printf(s, "MCKR = %8x\n", at91_sys_read(AT91_PMC_MCKR));
for (i = 0; i < 4; i++)
seq_printf(s, "PCK%d = %8x\n", i, at91_sys_read(AT91_PMC_PCKR(i)));
seq_printf(s, "SR = %8x\n", sr = at91_sys_read(AT91_PMC_SR));
seq_printf(s, "\n");
for (i = 0; i < ARRAY_SIZE(clock_list); i++) {
char *state;
struct clk *clk = clock_list[i];
if (clk->mode == pmc_sys_mode)
state = (scsr & clk->pmc_mask) ? "on" : "off";
else if (clk->mode == pmc_periph_mode)
state = (pcsr & clk->pmc_mask) ? "on" : "off";
else if (clk->pmc_mask)
state = (sr & clk->pmc_mask) ? "on" : "off";
else if (clk == &clk32k || clk == &main_clk)
state = "on";
else
state = "";
seq_printf(s, "%-10s users=%d %-3s %9ld Hz %s\n",
clk->name, clk->users, state, clk_get_rate(clk),
clk->parent ? clk->parent->name : "");
}
return 0;
}
static int at91_clk_open(struct inode *inode, struct file *file)
{
return single_open(file, at91_clk_show, NULL);
}
static struct file_operations at91_clk_operations = {
.open = at91_clk_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static int __init at91_clk_debugfs_init(void)
{
/* /sys/kernel/debug/at91_clk */
(void) debugfs_create_file("at91_clk", S_IFREG | S_IRUGO, NULL, NULL, &at91_clk_operations);
return 0;
}
postcore_initcall(at91_clk_debugfs_init);
#endif
/*------------------------------------------------------------------------*/
static u32 __init at91_pll_rate(struct clk *pll, u32 freq, u32 reg)
{
unsigned mul, div;
div = reg & 0xff;
mul = (reg >> 16) & 0x7ff;
if (div && mul) {
freq /= div;
freq *= mul + 1;
} else
freq = 0;
if (pll == &pllb && (reg & (1 << 28)))
freq /= 2;
return freq;
}
static unsigned __init at91_pll_calc(unsigned main_freq, unsigned out_freq)
{
unsigned i, div = 0, mul = 0, diff = 1 << 30;
unsigned ret = (out_freq > 155000000) ? 0xbe00 : 0x3e00;
/* PLL output max 240 MHz (or 180 MHz per errata) */
if (out_freq > 240000000)
goto fail;
for (i = 1; i < 256; i++) {
int diff1;
unsigned input, mul1;
/*
* PLL input between 1MHz and 32MHz per spec, but lower
* frequences seem necessary in some cases so allow 100K.
*/
input = main_freq / i;
if (input < 100000)
continue;
if (input > 32000000)
continue;
mul1 = out_freq / input;
if (mul1 > 2048)
continue;
if (mul1 < 2)
goto fail;
diff1 = out_freq - input * mul1;
if (diff1 < 0)
diff1 = -diff1;
if (diff > diff1) {
diff = diff1;
div = i;
mul = mul1;
if (diff == 0)
break;
}
}
if (i == 256 && diff > (out_freq >> 5))
goto fail;
return ret | ((mul - 1) << 16) | div;
fail:
return 0;
}
int __init at91_clock_init(unsigned long main_clock)
{
unsigned tmp, freq, mckr;
spin_lock_init(&clk_lock);
/*
* When the bootloader initialized the main oscillator correctly,
* there's no problem using the cycle counter. But if it didn't,
* or when using oscillator bypass mode, we must be told the speed
* of the main clock.
*/
if (!main_clock) {
do {
tmp = at91_sys_read(AT91_CKGR_MCFR);
} while (!(tmp & 0x10000));
main_clock = (tmp & 0xffff) * (AT91_SLOW_CLOCK / 16);
}
main_clk.rate_hz = main_clock;
/* report if PLLA is more than mildly overclocked */
plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_sys_read(AT91_CKGR_PLLAR));
if (plla.rate_hz > 209000000)
pr_info("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000);
/*
* USB clock init: choose 48 MHz PLLB value, turn all clocks off,
* disable 48MHz clock during usb peripheral suspend.
*
* REVISIT: assumes MCK doesn't derive from PLLB!
*/
at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | 0x10000000;
pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init);
at91_sys_write(AT91_PMC_PCDR, (1 << AT91_ID_UHP) | (1 << AT91_ID_UDP));
at91_sys_write(AT91_PMC_SCDR, AT91_PMC_UHP | AT91_PMC_UDP);
at91_sys_write(AT91_CKGR_PLLBR, 0);
at91_sys_write(AT91_PMC_SCER, AT91_PMC_MCKUDP);
/*
* MCK and CPU derive from one of those primary clocks.
* For now, assume this parentage won't change.
*/
mckr = at91_sys_read(AT91_PMC_MCKR);
mck.parent = clock_list[mckr & AT91_PMC_CSS];
mck.parent->users++;
freq = mck.parent->rate_hz;
freq /= (1 << ((mckr >> 2) & 3)); /* prescale */
mck.rate_hz = freq / (1 + ((mckr >> 8) & 3)); /* mdiv */
printk("Clocks: CPU %u MHz, master %u MHz, main %u.%03u MHz\n",
freq / 1000000, (unsigned) mck.rate_hz / 1000000,
(unsigned) main_clock / 1000000,
((unsigned) main_clock % 1000000) / 1000);
/* FIXME get rid of master_clock global */
at91_master_clock = mck.rate_hz;
#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS
/* establish PCK0..PCK3 parentage */
for (tmp = 0; tmp < ARRAY_SIZE(clock_list); tmp++) {
struct clk *clk = clock_list[tmp], *parent;
u32 pckr;
if (!clk->programmable)
continue;
pckr = at91_sys_read(AT91_PMC_PCKR(clk->id));
parent = clock_list[pckr & 3];
clk->parent = parent;
clk->rate_hz = parent->rate_hz / (1 << ((pckr >> 2) & 3));
}
#else
/* disable unused clocks */
at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK0 | AT91_PMC_PCK1 | AT91_PMC_PCK2 | AT91_PMC_PCK3);
#endif /* CONFIG_AT91_PROGRAMMABLE_CLOCKS */
/* FIXME several unused clocks may still be active... provide
* a CONFIG option to turn off all unused clocks at some point
* before driver init starts.
*/
return 0;
}
arch/arm/mach-at91rm9200/common.c 0 → 100644
View file @ 3995f4c5
/*
* arch/arm/mach-at91rm9200/common.c
*
* Copyright (C) 2005 SAN People
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*/
#include <linux/config.h>
#include <linux/module.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/arch/hardware.h>
static struct map_desc at91rm9200_io_desc[] __initdata = {
{
.virtual = AT91_VA_BASE_SYS,
.pfn = __phys_to_pfn(AT91_BASE_SYS),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = AT91_VA_BASE_SPI,
.pfn = __phys_to_pfn(AT91_BASE_SPI),
.length = SZ_16K,
.type = MT_DEVICE,
}, {
.virtual = AT91_VA_BASE_SSC2,
.pfn = __phys_to_pfn(AT91_BASE_SSC2),
.length = SZ_16K,
.type = MT_DEVICE,
}, {
.virtual = AT91_VA_BASE_SSC1,
.pfn = __phys_to_pfn(AT91_BASE_SSC1),
.length = SZ_16K,
.type = MT_DEVICE,
}, {
.virtual = AT91_VA_BASE_SSC0,
.pfn = __phys_to_pfn(AT91_BASE_SSC0),
.length = SZ_16K,
.type = MT_DEVICE,
}, {
.virtual = AT91_VA_BASE_US3,
.pfn = __phys_to_pfn(AT91_BASE_US3),
.length = SZ_16K,
.type = MT_DEVICE,
}, {
.virtual = AT91_VA_BASE_US2,
.pfn = __phys_to_pfn(AT91_BASE_US2),
.length = SZ_16K,
.type = MT_DEVICE,
}, {
.virtual = AT91_VA_BASE_US1,
.pfn = __phys_to_pfn(AT91_BASE_US1),
.length = SZ_16K,
.type = MT_DEVICE,
}, {
.virtual = AT91_VA_BASE_US0,
.pfn = __phys_to_pfn(AT91_BASE_US0),
.length = SZ_16K,
.type = MT_DEVICE,
}, {
.virtual = AT91_VA_BASE_EMAC,
.pfn = __phys_to_pfn(AT91_BASE_EMAC),
.length = SZ_16K,
.type = MT_DEVICE,
}, {
.virtual = AT91_VA_BASE_TWI,
.pfn = __phys_to_pfn(AT91_BASE_TWI),
.length = SZ_16K,
.type = MT_DEVICE,
}, {
.virtual = AT91_VA_BASE_MCI,
.pfn = __phys_to_pfn(AT91_BASE_MCI),
.length = SZ_16K,
.type = MT_DEVICE,
}, {
.virtual = AT91_VA_BASE_UDP,
.pfn = __phys_to_pfn(AT91_BASE_UDP),
.length = SZ_16K,
.type = MT_DEVICE,
}, {
.virtual = AT91_VA_BASE_TCB1,
.pfn = __phys_to_pfn(AT91_BASE_TCB1),
.length = SZ_16K,
.type = MT_DEVICE,
}, {
.virtual = AT91_VA_BASE_TCB0,
.pfn = __phys_to_pfn(AT91_BASE_TCB0),
.length = SZ_16K,
.type = MT_DEVICE,
},
};
void __init at91rm9200_map_io(void)
{
iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc));
}
unsigned long at91_master_clock;
EXPORT_SYMBOL(at91_master_clock);
int at91_serial_map[AT91_NR_UART];
int at91_console_port;
EXPORT_SYMBOL(at91_serial_map);
EXPORT_SYMBOL(at91_console_port);
arch/arm/mach-at91rm9200/devices.c 0 → 100644
View file @ 3995f4c5
/*
* arch/arm/mach-at91rm9200/devices.c
*
* Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
* Copyright (C) 2005 David Brownell
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*/
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <linux/config.h>
#include <linux/platform_device.h>
#include <asm/arch/board.h>
#include <asm/arch/pio.h>
/* --------------------------------------------------------------------
* USB Host
* -------------------------------------------------------------------- */
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
static u64 ohci_dmamask = 0xffffffffUL;
static struct at91_usbh_data usbh_data;
static struct resource at91rm9200_usbh_resource[] = {
[0] = {
.start = AT91_UHP_BASE,
.end = AT91_UHP_BASE + SZ_1M -1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = AT91_ID_UHP,
.end = AT91_ID_UHP,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device at91rm9200_usbh_device = {
.name = "at91rm9200-ohci",
.id = -1,
.dev = {
.dma_mask = &ohci_dmamask,
.coherent_dma_mask = 0xffffffff,
.platform_data = &usbh_data,
},
.resource = at91rm9200_usbh_resource,
.num_resources = ARRAY_SIZE(at91rm9200_usbh_resource),
};
void __init at91_add_device_usbh(struct at91_usbh_data *data)
{
if (!data)
return;
usbh_data = *data;
platform_device_register(&at91rm9200_usbh_device);
}
#else
void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
#endif
/* --------------------------------------------------------------------
* USB Device (Gadget)
* -------------------------------------------------------------------- */
#ifdef CONFIG_USB_GADGET_AT91
static struct at91_udc_data udc_data;
static struct resource at91_udc_resources[] = {
{
.start = AT91_BASE_UDP,
.end = AT91_BASE_UDP + SZ_16K - 1,
.flags = IORESOURCE_MEM,
}
};
static struct platform_device at91rm9200_udc_device = {
.name = "at91_udc",
.id = -1,
.dev = {
.platform_data = &udc_data,
},
.resource = at91_udc_resources,
.num_resources = ARRAY_SIZE(at91_udc_resources),
};
void __init at91_add_device_udc(struct at91_udc_data *data)
{
if (!data)
return;
if (data->vbus_pin) {
at91_set_gpio_input(data->vbus_pin, 0);
at91_set_deglitch(data->vbus_pin, 1);
}
if (data->pullup_pin)
at91_set_gpio_output(data->pullup_pin, 0);
udc_data = *data;
platform_device_register(&at91rm9200_udc_device);
}
#else
void __init at91_add_device_udc(struct at91_udc_data *data) {}
#endif
/* --------------------------------------------------------------------
* Ethernet
* -------------------------------------------------------------------- */
#if defined(CONFIG_ARM_AT91_ETHER) || defined(CONFIG_ARM_AT91_ETHER_MODULE)
static u64 eth_dmamask = 0xffffffffUL;
static struct at91_eth_data eth_data;
static struct platform_device at91rm9200_eth_device = {
.name = "at91_ether",
.id = -1,
.dev = {
.dma_mask = &eth_dmamask,
.coherent_dma_mask = 0xffffffff,
.platform_data = &eth_data,
},
.num_resources = 0,
};
void __init at91_add_device_eth(struct at91_eth_data *data)
{
if (!data)
return;
if (data->phy_irq_pin) {
at91_set_gpio_input(data->phy_irq_pin, 0);
at91_set_deglitch(data->phy_irq_pin, 1);
}
/* Pins used for MII and RMII */
at91_set_A_periph(AT91_PIN_PA16, 0); /* EMDIO */
at91_set_A_periph(AT91_PIN_PA15, 0); /* EMDC */
at91_set_A_periph(AT91_PIN_PA14, 0); /* ERXER */
at91_set_A_periph(AT91_PIN_PA13, 0); /* ERX1 */
at91_set_A_periph(AT91_PIN_PA12, 0); /* ERX0 */
at91_set_A_periph(AT91_PIN_PA11, 0); /* ECRS_ECRSDV */
at91_set_A_periph(AT91_PIN_PA10, 0); /* ETX1 */
at91_set_A_periph(AT91_PIN_PA9, 0); /* ETX0 */
at91_set_A_periph(AT91_PIN_PA8, 0); /* ETXEN */
at91_set_A_periph(AT91_PIN_PA7, 0); /* ETXCK_EREFCK */
if (!data->is_rmii) {
at91_set_B_periph(AT91_PIN_PB19, 0); /* ERXCK */
at91_set_B_periph(AT91_PIN_PB18, 0); /* ECOL */
at91_set_B_periph(AT91_PIN_PB17, 0); /* ERXDV */
at91_set_B_periph(AT91_PIN_PB16, 0); /* ERX3 */
at91_set_B_periph(AT91_PIN_PB15, 0); /* ERX2 */
at91_set_B_periph(AT91_PIN_PB14, 0); /* ETXER */
at91_set_B_periph(AT91_PIN_PB13, 0); /* ETX3 */
at91_set_B_periph(AT91_PIN_PB12, 0); /* ETX2 */
}
eth_data = *data;
platform_device_register(&at91rm9200_eth_device);
}
#else
void __init at91_add_device_eth(struct at91_eth_data *data) {}
#endif
/* --------------------------------------------------------------------
* Compact Flash / PCMCIA
* -------------------------------------------------------------------- */
#if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE)
static struct at91_cf_data cf_data;
static struct platform_device at91rm9200_cf_device = {
.name = "at91_cf",
.id = -1,
.dev = {
.platform_data = &cf_data,
},
.num_resources = 0,
};
void __init at91_add_device_cf(struct at91_cf_data *data)
{
if (!data)
return;
/* input/irq */
if (data->irq_pin) {
at91_set_gpio_input(data->irq_pin, 1);
at91_set_deglitch(data->irq_pin, 1);
}
at91_set_gpio_input(data->det_pin, 1);
at91_set_deglitch(data->det_pin, 1);
/* outputs, initially off */
if (data->vcc_pin)
at91_set_gpio_output(data->vcc_pin, 0);
at91_set_gpio_output(data->rst_pin, 0);
cf_data = *data;
platform_device_register(&at91rm9200_cf_device);
}
#else
void __init at91_add_device_cf(struct at91_cf_data *data) {}
#endif
/* --------------------------------------------------------------------
* MMC / SD
* -------------------------------------------------------------------- */
#if defined(CONFIG_MMC_AT91RM9200) || defined(CONFIG_MMC_AT91RM9200_MODULE)
static u64 mmc_dmamask = 0xffffffffUL;
static struct at91_mmc_data mmc_data;
static struct resource at91_mmc_resources[] = {
{
.start = AT91_BASE_MCI,
.end = AT91_BASE_MCI + SZ_16K - 1,
.flags = IORESOURCE_MEM,
}
};
static struct platform_device at91rm9200_mmc_device = {
.name = "at91rm9200_mci",
.id = -1,
.dev = {
.dma_mask = &mmc_dmamask,
.coherent_dma_mask = 0xffffffff,
.platform_data = &mmc_data,
},
.resource = at91_mmc_resources,
.num_resources = ARRAY_SIZE(at91_mmc_resources),
};
void __init at91_add_device_mmc(struct at91_mmc_data *data)
{
if (!data)
return;
/* input/irq */
if (data->det_pin) {
at91_set_gpio_input(data->det_pin, 1);
at91_set_deglitch(data->det_pin, 1);
}
if (data->wp_pin)
at91_set_gpio_input(data->wp_pin, 1);
/* CLK */
at91_set_A_periph(AT91_PIN_PA27, 0);
if (data->is_b) {
/* CMD */
at91_set_B_periph(AT91_PIN_PA8, 0);
/* DAT0, maybe DAT1..DAT3 */
at91_set_B_periph(AT91_PIN_PA9, 0);
if (data->wire4) {
at91_set_B_periph(AT91_PIN_PA10, 0);
at91_set_B_periph(AT91_PIN_PA11, 0);
at91_set_B_periph(AT91_PIN_PA12, 0);
}
} else {
/* CMD */
at91_set_A_periph(AT91_PIN_PA28, 0);
/* DAT0, maybe DAT1..DAT3 */
at91_set_A_periph(AT91_PIN_PA29, 0);
if (data->wire4) {
at91_set_B_periph(AT91_PIN_PB3, 0);
at91_set_B_periph(AT91_PIN_PB4, 0);
at91_set_B_periph(AT91_PIN_PB5, 0);
}
}
mmc_data = *data;
platform_device_register(&at91rm9200_mmc_device);
}
#else
void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
#endif
/* -------------------------------------------------------------------- */
arch/arm/mach-at91rm9200/generic.h 0 → 100644
View file @ 3995f4c5
/*
* linux/arch/arm/mach-at91rm9200/generic.h
*
* Copyright (C) 2005 David Brownell
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
void at91_gpio_irq_setup(unsigned banks);
struct sys_timer;
extern struct sys_timer at91rm9200_timer;
extern void __init at91rm9200_map_io(void);
extern int __init at91_clock_init(unsigned long main_clock);
arch/arm/mach-at91rm9200/gpio.c 0 → 100644
View file @ 3995f4c5
/*
* linux/arch/arm/mach-at91rm9200/gpio.c
*
* Copyright (C) 2005 HP Labs
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/module.h>
#include <asm/io.h>
#include <asm/mach/irq.h>
#include <asm/arch/hardware.h>
#include <asm/arch/gpio.h>
static const u32 pio_controller_offset[4] = {
AT91_PIOA,
AT91_PIOB,
AT91_PIOC,
AT91_PIOD,
};
static inline void __iomem *pin_to_controller(unsigned pin)
{
void __iomem *sys_base = (void __iomem *) AT91_VA_BASE_SYS;
pin -= PIN_BASE;
pin /= 32;
if (likely(pin < BGA_GPIO_BANKS))
return sys_base + pio_controller_offset[pin];
return NULL;
}
static inline unsigned pin_to_mask(unsigned pin)
{
pin -= PIN_BASE;
return 1 << (pin % 32);
}
/*--------------------------------------------------------------------------*/
/* Not all hardware capabilities are exposed through these calls; they
* only encapsulate the most common features and modes. (So if you
* want to change signals in groups, do it directly.)
*
* Bootloaders will usually handle some of the pin multiplexing setup.
* The intent is certainly that by the time Linux is fully booted, all
* pins should have been fully initialized. These setup calls should
* only be used by board setup routines, or possibly in driver probe().
*
* For bootloaders doing all that setup, these calls could be inlined
* as NOPs so Linux won't duplicate any setup code
*/
/*
* mux the pin to the "A" internal peripheral role.
*/
int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup)
{
void __iomem *pio = pin_to_controller(pin);
unsigned mask = pin_to_mask(pin);
if (!pio)
return -EINVAL;
__raw_writel(mask, pio + PIO_IDR);
__raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
__raw_writel(mask, pio + PIO_ASR);
__raw_writel(mask, pio + PIO_PDR);
return 0;
}
EXPORT_SYMBOL(at91_set_A_periph);
/*
* mux the pin to the "B" internal peripheral role.
*/
int __init_or_module at91_set_B_periph(unsigned pin, int use_pullup)
{
void __iomem *pio = pin_to_controller(pin);
unsigned mask = pin_to_mask(pin);
if (!pio)
return -EINVAL;
__raw_writel(mask, pio + PIO_IDR);
__raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
__raw_writel(mask, pio + PIO_BSR);
__raw_writel(mask, pio + PIO_PDR);
return 0;
}
EXPORT_SYMBOL(at91_set_B_periph);
/*
* mux the pin to the gpio controller (instead of "A" or "B" peripheral), and
* configure it for an input.
*/
int __init_or_module at91_set_gpio_input(unsigned pin, int use_pullup)
{
void __iomem *pio = pin_to_controller(pin);
unsigned mask = pin_to_mask(pin);
if (!pio)
return -EINVAL;
__raw_writel(mask, pio + PIO_IDR);
__raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
__raw_writel(mask, pio + PIO_ODR);
__raw_writel(mask, pio + PIO_PER);
return 0;
}
EXPORT_SYMBOL(at91_set_gpio_input);
/*
* mux the pin to the gpio controller (instead of "A" or "B" peripheral),
* and configure it for an output.
*/
int __init_or_module at91_set_gpio_output(unsigned pin, int value)
{
void __iomem *pio = pin_to_controller(pin);
unsigned mask = pin_to_mask(pin);
if (!pio)
return -EINVAL;
__raw_writel(mask, pio + PIO_IDR);
__raw_writel(mask, pio + PIO_PUDR);
__raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
__raw_writel(mask, pio + PIO_OER);
__raw_writel(mask, pio + PIO_PER);
return 0;
}
EXPORT_SYMBOL(at91_set_gpio_output);
/*
* enable/disable the glitch filter; mostly used with IRQ handling.
*/
int __init_or_module at91_set_deglitch(unsigned pin, int is_on)
{
void __iomem *pio = pin_to_controller(pin);
unsigned mask = pin_to_mask(pin);
if (!pio)
return -EINVAL;
__raw_writel(mask, pio + (is_on ? PIO_IFER : PIO_IFDR));
return 0;
}
EXPORT_SYMBOL(at91_set_deglitch);
/*--------------------------------------------------------------------------*/
/*
* assuming the pin is muxed as a gpio output, set its value.
*/
int at91_set_gpio_value(unsigned pin, int value)
{
void __iomem *pio = pin_to_controller(pin);
unsigned mask = pin_to_mask(pin);
if (!pio)
return -EINVAL;
__raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
return 0;
}
EXPORT_SYMBOL(at91_set_gpio_value);
/*
* read the pin's value (works even if it's not muxed as a gpio).
*/
int at91_get_gpio_value(unsigned pin)
{
void __iomem *pio = pin_to_controller(pin);
unsigned mask = pin_to_mask(pin);
u32 pdsr;
if (!pio)
return -EINVAL;
pdsr = __raw_readl(pio + PIO_PDSR);
return (pdsr & mask) != 0;
}
EXPORT_SYMBOL(at91_get_gpio_value);
/*--------------------------------------------------------------------------*/
/* Several AIC controller irqs are dispatched through this GPIO handler.
* To use any AT91_PIN_* as an externally triggered IRQ, first call
* at91_set_gpio_input() then maybe enable its glitch filter.
* Then just request_irq() with the pin ID; it works like any ARM IRQ
* handler, though it always triggers on rising and falling edges.
*
* Alternatively, certain pins may be used directly as IRQ0..IRQ6 after
* configuring them with at91_set_a_periph() or at91_set_b_periph().
* IRQ0..IRQ6 should be configurable, e.g. level vs edge triggering.
*/
static void gpio_irq_mask(unsigned pin)
{
void __iomem *pio = pin_to_controller(pin);
unsigned mask = pin_to_mask(pin);
if (pio)
__raw_writel(mask, pio + PIO_IDR);
}
static void gpio_irq_unmask(unsigned pin)
{
void __iomem *pio = pin_to_controller(pin);
unsigned mask = pin_to_mask(pin);
if (pio)
__raw_writel(mask, pio + PIO_IER);
}
static int gpio_irq_type(unsigned pin, unsigned type)
{
return (type == IRQT_BOTHEDGE) ? 0 : -EINVAL;
}
static struct irqchip gpio_irqchip = {
.mask = gpio_irq_mask,
.unmask = gpio_irq_unmask,
.set_type = gpio_irq_type,
};
static void gpio_irq_handler(unsigned irq, struct irqdesc *desc, struct pt_regs *regs)
{
unsigned pin;
struct irqdesc *gpio;
void __iomem *pio;
u32 isr;
pio = (void __force __iomem *) desc->chipdata;
/* temporarily mask (level sensitive) parent IRQ */
desc->chip->ack(irq);
for (;;) {
isr = __raw_readl(pio + PIO_ISR) & __raw_readl(pio + PIO_IMR);
if (!isr)
break;
pin = (unsigned) desc->data;
gpio = &irq_desc[pin];
while (isr) {
if (isr & 1)
gpio->handle(pin, gpio, regs);
pin++;
gpio++;
isr >>= 1;
}
}
desc->chip->unmask(irq);
/* now it may re-trigger */
}
/* call this from board-specific init_irq */
void __init at91_gpio_irq_setup(unsigned banks)
{
unsigned pioc, pin, id;
if (banks > 4)
banks = 4;
for (pioc = 0, pin = PIN_BASE, id = AT91_ID_PIOA;
pioc < banks;
pioc++, id++) {
void __iomem *controller;
unsigned i;
controller = (void __iomem *) AT91_VA_BASE_SYS + pio_controller_offset[pioc];
__raw_writel(~0, controller + PIO_IDR);
set_irq_data(id, (void *) pin);
set_irq_chipdata(id, (void __force *) controller);
for (i = 0; i < 32; i++, pin++) {
set_irq_chip(pin, &gpio_irqchip);
set_irq_handler(pin, do_simple_IRQ);
set_irq_flags(pin, IRQF_VALID);
}
set_irq_chained_handler(id, gpio_irq_handler);
/* enable the PIO peripheral clock */
at91_sys_write(AT91_PMC_PCER, 1 << id);
}
pr_info("AT91: %d gpio irqs in %d banks\n", pin - PIN_BASE, banks);
}
arch/arm/mach-at91rm9200/irq.c 0 → 100644
View file @ 3995f4c5
/*
* linux/arch/arm/mach-at91rm9200/irq.c
*
* Copyright (C) 2004 SAN People
* Copyright (C) 2004 ATMEL
* Copyright (C) Rick Bronson
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/config.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/mm.h>
#include <linux/types.h>
#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/setup.h>
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
#include "generic.h"
/*
* The default interrupt priority levels (0 = lowest, 7 = highest).
*/
static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = {
7, /* Advanced Interrupt Controller */
7, /* System Peripheral */
0, /* Parallel IO Controller A */
0, /* Parallel IO Controller B */
0, /* Parallel IO Controller C */
0, /* Parallel IO Controller D */
6, /* USART 0 */
6, /* USART 1 */
6, /* USART 2 */
6, /* USART 3 */
0, /* Multimedia Card Interface */
4, /* USB Device Port */
0, /* Two-Wire Interface */
6, /* Serial Peripheral Interface */
5, /* Serial Synchronous Controller */
5, /* Serial Synchronous Controller */
5, /* Serial Synchronous Controller */
0, /* Timer Counter 0 */
0, /* Timer Counter 1 */
0, /* Timer Counter 2 */
0, /* Timer Counter 3 */
0, /* Timer Counter 4 */
0, /* Timer Counter 5 */
3, /* USB Host port */
3, /* Ethernet MAC */
0, /* Advanced Interrupt Controller */
0, /* Advanced Interrupt Controller */
0, /* Advanced Interrupt Controller */
0, /* Advanced Interrupt Controller */
0, /* Advanced Interrupt Controller */
0, /* Advanced Interrupt Controller */
0 /* Advanced Interrupt Controller */
};
static void at91rm9200_mask_irq(unsigned int irq)
{
/* Disable interrupt on AIC */
at91_sys_write(AT91_AIC_IDCR, 1 << irq);
}
static void at91rm9200_unmask_irq(unsigned int irq)
{
/* Enable interrupt on AIC */
at91_sys_write(AT91_AIC_IECR, 1 << irq);
}
static int at91rm9200_irq_type(unsigned irq, unsigned type)
{
unsigned int smr, srctype;
/* change triggering only for FIQ and external IRQ0..IRQ6 */
if ((irq < AT91_ID_IRQ0) && (irq != AT91_ID_FIQ))
return -EINVAL;
switch (type) {
case IRQT_HIGH:
srctype = AT91_AIC_SRCTYPE_HIGH;
break;
case IRQT_RISING:
srctype = AT91_AIC_SRCTYPE_RISING;
break;
case IRQT_LOW:
srctype = AT91_AIC_SRCTYPE_LOW;
break;
case IRQT_FALLING:
srctype = AT91_AIC_SRCTYPE_FALLING;
break;
default:
return -EINVAL;
}
smr = at91_sys_read(AT91_AIC_SMR(irq)) & ~AT91_AIC_SRCTYPE;
at91_sys_write(AT91_AIC_SMR(irq), smr | srctype);
return 0;
}
static struct irqchip at91rm9200_irq_chip = {
.ack = at91rm9200_mask_irq,
.mask = at91rm9200_mask_irq,
.unmask = at91rm9200_unmask_irq,
.set_type = at91rm9200_irq_type,
};
/*
* Initialize the AIC interrupt controller.
*/
void __init at91rm9200_init_irq(unsigned int priority[NR_AIC_IRQS])
{
unsigned int i;
/* No priority list specified for this board -> use defaults */
if (priority == NULL)
priority = at91rm9200_default_irq_priority;
/*
* The IVR is used by macro get_irqnr_and_base to read and verify.
* The irq number is NR_AIC_IRQS when a spurious interrupt has occurred.
*/
for (i = 0; i < NR_AIC_IRQS; i++) {
/* Put irq number in Source Vector Register: */
at91_sys_write(AT91_AIC_SVR(i), i);
/* Store the Source Mode Register as defined in table above */
at91_sys_write(AT91_AIC_SMR(i), AT91_AIC_SRCTYPE_LOW | priority[i]);
set_irq_chip(i, &at91rm9200_irq_chip);
set_irq_handler(i, do_level_IRQ);
set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
/* Perform 8 End Of Interrupt Command to make sure AIC will not Lock out nIRQ */
if (i < 8)
at91_sys_write(AT91_AIC_EOICR, 0);
}
/*
* Spurious Interrupt ID in Spurious Vector Register is NR_AIC_IRQS
* When there is no current interrupt, the IRQ Vector Register reads the value stored in AIC_SPU
*/
at91_sys_write(AT91_AIC_SPU, NR_AIC_IRQS);
/* No debugging in AIC: Debug (Protect) Control Register */
at91_sys_write(AT91_AIC_DCR, 0);
/* Disable and clear all interrupts initially */
at91_sys_write(AT91_AIC_IDCR, 0xFFFFFFFF);
at91_sys_write(AT91_AIC_ICCR, 0xFFFFFFFF);
}
arch/arm/mach-at91rm9200/time.c 0 → 100644
View file @ 3995f4c5
/*
* linux/arch/arm/mach-at91rm9200/time.c
*
* Copyright (C) 2003 SAN People
* Copyright (C) 2003 ATMEL
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/config.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/time.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach/time.h>
/*
* The ST_CRTR is updated asynchronously to the master clock. It is therefore
* necessary to read it twice (with the same value) to ensure accuracy.
*/
static inline unsigned long read_CRTR(void) {
unsigned long x1, x2;
do {
x1 = at91_sys_read(AT91_ST_CRTR);
x2 = at91_sys_read(AT91_ST_CRTR);
} while (x1 != x2);
return x1;
}
/*
* Returns number of microseconds since last timer interrupt. Note that interrupts
* will have been disabled by do_gettimeofday()
* 'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy.
* 'tick' is usecs per jiffy (linux/timex.h).
*/
static unsigned long at91rm9200_gettimeoffset(void)
{
unsigned long elapsed;
elapsed = (read_CRTR() - at91_sys_read(AT91_ST_RTAR)) & AT91_ST_ALMV;
return (unsigned long)(elapsed * (tick_nsec / 1000)) / LATCH;
}
/*
* IRQ handler for the timer.
*/
static irqreturn_t at91rm9200_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
unsigned long rtar;
if (at91_sys_read(AT91_ST_SR) & AT91_ST_PITS) { /* This is a shared interrupt */
write_seqlock(&xtime_lock);
do {
timer_tick(regs);
rtar = (at91_sys_read(AT91_ST_RTAR) + LATCH) & AT91_ST_ALMV;
at91_sys_write(AT91_ST_RTAR, rtar);
} while (((read_CRTR() - at91_sys_read(AT91_ST_RTAR)) & AT91_ST_ALMV) >= LATCH);
write_sequnlock(&xtime_lock);
return IRQ_HANDLED;
}
else
return IRQ_NONE; /* not handled */
}
static struct irqaction at91rm9200_timer_irq = {
.name = "at91_tick",
.flags = SA_SHIRQ | SA_INTERRUPT,
.handler = at91rm9200_timer_interrupt
};
/*
* Set up timer interrupt.
*/
void __init at91rm9200_timer_init(void)
{
/* Disable all timer interrupts */
at91_sys_write(AT91_ST_IDR, AT91_ST_PITS | AT91_ST_WDOVF | AT91_ST_RTTINC | AT91_ST_ALMS);
(void) at91_sys_read(AT91_ST_SR); /* Clear any pending interrupts */
/*
* Make IRQs happen for the system timer.
*/
setup_irq(AT91_ID_SYS, &at91rm9200_timer_irq);
/* Set initial alarm to 0 */
at91_sys_write(AT91_ST_RTAR, 0);
/* Real time counter incremented every 30.51758 microseconds */
at91_sys_write(AT91_ST_RTMR, 1);
/* Set Period Interval timer */
at91_sys_write(AT91_ST_PIMR, LATCH);
/* Change the kernel's 'tick' value to 10009 usec. (the default is 10000) */
tick_usec = (LATCH * 1000000) / CLOCK_TICK_RATE;
/* Enable Period Interval Timer interrupt */
at91_sys_write(AT91_ST_IER, AT91_ST_PITS);
}
struct sys_timer at91rm9200_timer = {
.init = at91rm9200_timer_init,
.offset = at91rm9200_gettimeoffset,
};
arch/arm/mach-epxa10db/Kconfig deleted 100644 → 0
View file @ 05814450
if ARCH_CAMELOT
menu "Epxa10db"
comment "PLD hotswap support"
config PLD
bool
default y
config PLD_HOTSWAP
bool "Support for PLD device hotplugging (experimental)"
depends on EXPERIMENTAL
help
This enables support for the dynamic loading and configuration of
compatible drivers when the contents of the PLD are changed. This
is still experimental and requires configuration tools which are
not yet generally available. Say N here. You must enable the kernel
module loader for this feature to work.
endmenu
endif
arch/arm/mach-epxa10db/Makefile deleted 100644 → 0
View file @ 05814450
#
# Makefile for the linux kernel.
#
# Object file lists.
obj-y := arch.o irq.o mm.o time.o
obj-m :=
obj-n :=
obj- :=
arch/arm/mach-epxa10db/arch.c deleted 100644 → 0
View file @ 05814450
/*
* linux/arch/arm/mach-epxa10db/arch.c
*
* Copyright (C) 2000 Deep Blue Solutions Ltd
* Copyright (C) 2001 Altera Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/types.h>
#include <linux/init.h>
#include <linux/serial_8250.h>
#include <asm/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
static struct plat_serial8250_port serial_platform_data[] = {
{
.iobase = 0x3f8,
.irq = IRQ_UARTINT0,
#error FIXME
.uartclk = 0,
.regshift = 0,
.iotype = UPIO_PORT,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
},
{
.iobase = 0x2f8,
.irq = IRQ_UARTINT1,
#error FIXME
.uartclk = 0,
.regshift = 0,
.iotype = UPIO_PORT,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
},
{ },
};
static struct platform_device serial_device = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM,
.dev = {
.platform_data = serial_platform_data,
},
};
extern void epxa10db_map_io(void);
extern void epxa10db_init_irq(void);
extern struct sys_timer epxa10db_timer;
MACHINE_START(CAMELOT, "Altera Epxa10db")
/* Maintainer: Altera Corporation */
.phys_ram = 0x00000000,
.phys_io = 0x7fffc000,
.io_pg_offst = ((0xffffc000) >> 18) & 0xfffc,
.map_io = epxa10db_map_io,
.init_irq = epxa10db_init_irq,
.timer = &epxa10db_timer,
MACHINE_END
arch/arm/mach-epxa10db/irq.c deleted 100644 → 0
View file @ 05814450
/*
* linux/arch/arm/mach-epxa10db/irq.c
*
* Copyright (C) 2001 Altera Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/stddef.h>
#include <linux/timer.h>
#include <linux/list.h>
#include <asm/io.h>
#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <asm/arch/platform.h>
#include <asm/arch/int_ctrl00.h>
static void epxa_mask_irq(unsigned int irq)
{
writel(1 << irq, INT_MC(IO_ADDRESS(EXC_INT_CTRL00_BASE)));
}
static void epxa_unmask_irq(unsigned int irq)
{
writel(1 << irq, INT_MS(IO_ADDRESS(EXC_INT_CTRL00_BASE)));
}
static struct irqchip epxa_irq_chip = {
.ack = epxa_mask_irq,
.mask = epxa_mask_irq,
.unmask = epxa_unmask_irq,
};
static struct resource irq_resource = {
.name = "irq_handler",
.start = IO_ADDRESS(EXC_INT_CTRL00_BASE),
.end = IO_ADDRESS(INT_PRIORITY_FC(EXC_INT_CTRL00_BASE))+4,
};
void __init epxa10db_init_irq(void)
{
unsigned int i;
request_resource(&iomem_resource, &irq_resource);
/*
* This bit sets up the interrupt controller using
* the 6 PLD interrupts mode (the default) each
* irqs is assigned a priority which is the same
* as its interrupt number. This scheme is used because
* its easy, but you may want to change it depending
* on the contents of your PLD
*/
writel(3,INT_MODE(IO_ADDRESS(EXC_INT_CTRL00_BASE)));
for (i = 0; i < NR_IRQS; i++){
writel(i+1, INT_PRIORITY_P0(IO_ADDRESS(EXC_INT_CTRL00_BASE)) + (4*i));
set_irq_chip(i,&epxa_irq_chip);
set_irq_handler(i,do_level_IRQ);
set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
}
/* Disable all interrupts */
writel(-1,INT_MC(IO_ADDRESS(EXC_INT_CTRL00_BASE)));
}
arch/arm/mach-epxa10db/mm.c deleted 100644 → 0
View file @ 05814450
/*
* linux/arch/arm/mach-epxa10db/mm.c
*
* MM routines for Altera'a Epxa10db board
*
* Copyright (C) 2001 Altera Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/sizes.h>
#include <asm/page.h>
#include <asm/mach/map.h>
/* Page table mapping for I/O region */
static struct map_desc epxa10db_io_desc[] __initdata = {
{
.virtual = IO_ADDRESS(EXC_REGISTERS_BASE),
.pfn = __phys_to_pfn(EXC_REGISTERS_BASE),
.length = SZ_16K,
.type = MT_DEVICE
}, {
.virtual = IO_ADDRESS(EXC_PLD_BLOCK0_BASE),
.pfn = __phys_to_pfn(EXC_PLD_BLOCK0_BASE),
.length = SZ_16K,
.type = MT_DEVICE
}, {
.virtual = IO_ADDRESS(EXC_PLD_BLOCK1_BASE),
.pfn =__phys_to_pfn(EXC_PLD_BLOCK1_BASE),
.length = SZ_16K,
.type = MT_DEVICE
}, {
.virtual = IO_ADDRESS(EXC_PLD_BLOCK2_BASE),
.physical = __phys_to_pfn(EXC_PLD_BLOCK2_BASE),
.length = SZ_16K,
.type = MT_DEVICE
}, {
.virtual = IO_ADDRESS(EXC_PLD_BLOCK3_BASE),
.pfn = __phys_to_pfn(EXC_PLD_BLOCK3_BASE),
.length = SZ_16K,
.type = MT_DEVICE
}, {
.virtual = FLASH_VADDR(EXC_EBI_BLOCK0_BASE),
.pfn = __phys_to_pfn(EXC_EBI_BLOCK0_BASE),
.length = SZ_16M,
.type = MT_DEVICE
}
};
void __init epxa10db_map_io(void)
{
iotable_init(epxa10db_io_desc, ARRAY_SIZE(epxa10db_io_desc));
}
arch/arm/mach-epxa10db/time.c deleted 100644 → 0
View file @ 05814450
/*
* linux/arch/arm/mach-epxa10db/time.c
*
* Copyright (C) 2000 Deep Blue Solutions
* Copyright (C) 2001 Altera Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <asm/hardware.h>
#include <asm/system.h>
#include <asm/leds.h>
#include <asm/mach/time.h>
#define TIMER00_TYPE (volatile unsigned int*)
#include <asm/arch/timer00.h>
static int epxa10db_set_rtc(void)
{
return 1;
}
static int epxa10db_rtc_init(void)
{
set_rtc = epxa10db_set_rtc;
return 0;
}
__initcall(epxa10db_rtc_init);
/*
* IRQ handler for the timer
*/
static irqreturn_t
epxa10db_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
write_seqlock(&xtime_lock);
// ...clear the interrupt
*TIMER0_CR(IO_ADDRESS(EXC_TIMER00_BASE))|=TIMER0_CR_CI_MSK;
timer_tick(regs);
write_sequnlock(&xtime_lock);
return IRQ_HANDLED;
}
static struct irqaction epxa10db_timer_irq = {
.name = "Excalibur Timer Tick",
.flags = SA_INTERRUPT | SA_TIMER,
.handler = epxa10db_timer_interrupt,
};
/*
* Set up timer interrupt, and return the current time in seconds.
*/
static void __init epxa10db_timer_init(void)
{
/* Start the timer */
*TIMER0_LIMIT(IO_ADDRESS(EXC_TIMER00_BASE))=(unsigned int)(EXC_AHB2_CLK_FREQUENCY/200);
*TIMER0_PRESCALE(IO_ADDRESS(EXC_TIMER00_BASE))=1;
*TIMER0_CR(IO_ADDRESS(EXC_TIMER00_BASE))=TIMER0_CR_IE_MSK | TIMER0_CR_S_MSK;
setup_irq(IRQ_TIMER0, &epxa10db_timer_irq);
}
struct sys_timer epxa10db_timer = {
.init = epxa10db_timer_init,
};
arch/arm/mach-s3c2410/clock.c
View file @ 3995f4c5
......@@ -253,100 +253,101 @@ struct clk s3c24xx_uclk = {
/* clock definitions */
static struct clk init_clocks[] = {
{ .name = "nand",
{
.name = "nand",
.id = -1,
.parent = &clk_h,
.enable = s3c24xx_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_NAND
},
{ .name = "lcd",
.ctrlbit = S3C2410_CLKCON_NAND,
}, {
.name = "lcd",
.id = -1,
.parent = &clk_h,
.enable = s3c24xx_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_LCDC
},
{ .name = "usb-host",
.ctrlbit = S3C2410_CLKCON_LCDC,
}, {
.name = "usb-host",
.id = -1,
.parent = &clk_h,
.enable = s3c24xx_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_USBH
},
{ .name = "usb-device",
.ctrlbit = S3C2410_CLKCON_USBH,
}, {
.name = "usb-device",
.id = -1,
.parent = &clk_h,
.enable = s3c24xx_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_USBD
},
{ .name = "timers",
.ctrlbit = S3C2410_CLKCON_USBD,
}, {
.name = "timers",
.id = -1,
.parent = &clk_p,
.enable = s3c24xx_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_PWMT
},
{ .name = "sdi",
.ctrlbit = S3C2410_CLKCON_PWMT,
}, {
.name = "sdi",
.id = -1,
.parent = &clk_p,
.enable = s3c24xx_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_SDI
},
{ .name = "uart",
.ctrlbit = S3C2410_CLKCON_SDI,
}, {
.name = "uart",
.id = 0,
.parent = &clk_p,
.enable = s3c24xx_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_UART0
},
{ .name = "uart",
.ctrlbit = S3C2410_CLKCON_UART0,
}, {
.name = "uart",
.id = 1,
.parent = &clk_p,
.enable = s3c24xx_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_UART1
},
{ .name = "uart",
.ctrlbit = S3C2410_CLKCON_UART1,
}, {
.name = "uart",
.id = 2,
.parent = &clk_p,
.enable = s3c24xx_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_UART2
},
{ .name = "gpio",
.ctrlbit = S3C2410_CLKCON_UART2,
}, {
.name = "gpio",
.id = -1,
.parent = &clk_p,
.enable = s3c24xx_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_GPIO
},
{ .name = "rtc",
.ctrlbit = S3C2410_CLKCON_GPIO,
}, {
.name = "rtc",
.id = -1,
.parent = &clk_p,
.enable = s3c24xx_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_RTC
},
{ .name = "adc",
.ctrlbit = S3C2410_CLKCON_RTC,
}, {
.name = "adc",
.id = -1,
.parent = &clk_p,
.enable = s3c24xx_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_ADC
},
{ .name = "i2c",
.ctrlbit = S3C2410_CLKCON_ADC,
}, {
.name = "i2c",
.id = -1,
.parent = &clk_p,
.enable = s3c24xx_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_IIC
},
{ .name = "iis",
.ctrlbit = S3C2410_CLKCON_IIC,
}, {
.name = "iis",
.id = -1,
.parent = &clk_p,
.enable = s3c24xx_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_IIS
},
{ .name = "spi",
.ctrlbit = S3C2410_CLKCON_IIS,
}, {
.name = "spi",
.id = -1,
.parent = &clk_p,
.enable = s3c24xx_clkcon_enable,
.ctrlbit = S3C2410_CLKCON_SPI
},
{ .name = "watchdog",
.ctrlbit = S3C2410_CLKCON_SPI,
}, {
.name = "watchdog",
.id = -1,
.parent = &clk_p,
.ctrlbit = 0
.ctrlbit = 0,
}
};
......@@ -390,15 +391,14 @@ int __init s3c24xx_setup_clocks(unsigned long xtal,
clk_p.rate = pclk;
clk_f.rate = fclk;
/* it looks like just setting the register here is not good
* enough, and causes the odd hang at initial boot time, so
* do all of them indivdually.
*
* I think disabling the LCD clock if the LCD is active is
* very dangerous, and therefore the bootloader should be
* careful to not enable the LCD clock if it is not needed.
/* We must be careful disabling the clocks we are not intending to
* be using at boot time, as subsytems such as the LCD which do
* their own DMA requests to the bus can cause the system to lockup
* if they where in the middle of requesting bus access.
*
* and of course, this looks neater
* Disabling the LCD clock if the LCD is active is very dangerous,
* and therefore the bootloader should be careful to not enable
* the LCD clock if it is not needed.
*/
s3c24xx_clk_enable(S3C2410_CLKCON_NAND, 0);
......
arch/arm/mm/Kconfig
View file @ 3995f4c5
......@@ -62,8 +62,8 @@ config CPU_ARM720T
# ARM920T
config CPU_ARM920T
bool "Support ARM920T processor" if !ARCH_S3C2410
depends on ARCH_INTEGRATOR || ARCH_S3C2410 || ARCH_IMX || ARCH_AAEC2000
default y if ARCH_S3C2410
depends on ARCH_INTEGRATOR || ARCH_S3C2410 || ARCH_IMX || ARCH_AAEC2000 || ARCH_AT91RM9200
default y if ARCH_S3C2410 || ARCH_AT91RM9200
select CPU_32v4
select CPU_ABRT_EV4T
select CPU_CACHE_V4WT
......@@ -83,8 +83,8 @@ config CPU_ARM920T
# ARM922T
config CPU_ARM922T
bool "Support ARM922T processor" if ARCH_INTEGRATOR
depends on ARCH_CAMELOT || ARCH_LH7A40X || ARCH_INTEGRATOR
default y if ARCH_CAMELOT || ARCH_LH7A40X
depends on ARCH_LH7A40X || ARCH_INTEGRATOR
default y if ARCH_LH7A40X
select CPU_32v4
select CPU_ABRT_EV4T
select CPU_CACHE_V4WT
......
arch/arm/mm/ioremap.c
View file @ 3995f4c5
......@@ -86,11 +86,12 @@ remap_area_pmd(pmd_t * pmd, unsigned long address, unsigned long size,
}
static int
remap_area_pages(unsigned long start, unsigned long phys_addr,
remap_area_pages(unsigned long start, unsigned long pfn,
unsigned long size, unsigned long flags)
{
unsigned long address = start;
unsigned long end = start + size;
unsigned long phys_addr = __pfn_to_phys(pfn);
int err = 0;
pgd_t * dir;
......@@ -130,36 +131,44 @@ remap_area_pages(unsigned long start, unsigned long phys_addr,
* mapping. See include/asm-arm/proc-armv/pgtable.h for more information.
*/
void __iomem *
__ioremap(unsigned long phys_addr, size_t size, unsigned long flags)
__ioremap_pfn(unsigned long pfn, unsigned long offset, size_t size,
unsigned long flags)
{
void * addr;
unsigned long addr;
struct vm_struct * area;
unsigned long offset, last_addr;
/* Don't allow wraparound or zero size */
area = get_vm_area(size, VM_IOREMAP);
if (!area)
return NULL;
addr = (unsigned long)area->addr;
if (remap_area_pages(addr, pfn, size, flags)) {
vfree(addr);
return NULL;
}
return (void __iomem *) (offset + (char *)addr);
}
EXPORT_SYMBOL(__ioremap_pfn);
void __iomem *
__ioremap(unsigned long phys_addr, size_t size, unsigned long flags)
{
unsigned long last_addr;
unsigned long offset = phys_addr & ~PAGE_MASK;
unsigned long pfn = __phys_to_pfn(phys_addr);
/*
* Don't allow wraparound or zero size
*/
last_addr = phys_addr + size - 1;
if (!size || last_addr < phys_addr)
return NULL;
/*
* Mappings have to be page-aligned
* Page align the mapping size
*/
offset = phys_addr & ~PAGE_MASK;
phys_addr &= PAGE_MASK;
size = PAGE_ALIGN(last_addr + 1) - phys_addr;
/*
* Ok, go for it..
*/
area = get_vm_area(size, VM_IOREMAP);
if (!area)
return NULL;
addr = area->addr;
if (remap_area_pages((unsigned long) addr, phys_addr, size, flags)) {
vfree(addr);
return NULL;
}
return (void __iomem *) (offset + (char *)addr);
return __ioremap_pfn(pfn, offset, size, flags);
}
EXPORT_SYMBOL(__ioremap);
......
arch/arm/tools/mach-types
View file @ 3995f4c5
......@@ -12,7 +12,7 @@
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
# Last update: Fri Nov 25 14:43:04 2005
# Last update: Mon Jan 9 12:56:42 2006
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
......@@ -910,3 +910,31 @@ mbus MACH_MBUS MBUS 896
nadia2vb MACH_NADIA2VB NADIA2VB 897
r1000 MACH_R1000 R1000 898
hw90250 MACH_HW90250 HW90250 899
omap_2430sdp MACH_OMAP_2430SDP OMAP_2430SDP 900
davinci_evm MACH_DAVINCI_EVM DAVINCI_EVM 901
omap_tornado MACH_OMAP_TORNADO OMAP_TORNADO 902
olocreek MACH_OLOCREEK OLOCREEK 903
palmz72 MACH_PALMZ72 PALMZ72 904
nxdb500 MACH_NXDB500 NXDB500 905
apf9328 MACH_APF9328 APF9328 906
omap_wipoq MACH_OMAP_WIPOQ OMAP_WIPOQ 907
omap_twip MACH_OMAP_TWIP OMAP_TWIP 908
xscale_treo650 MACH_XSCALE_PALMTREO650 XSCALE_PALMTREO650 909
acumen MACH_ACUMEN ACUMEN 910
xp100 MACH_XP100 XP100 911
fs2410 MACH_FS2410 FS2410 912
pxa270_cerf MACH_PXA270_CERF PXA270_CERF 913
sq2ftlpalm MACH_SQ2FTLPALM SQ2FTLPALM 914
bsemserver MACH_BSEMSERVER BSEMSERVER 915
netclient MACH_NETCLIENT NETCLIENT 916
xscale_palmtt5 MACH_XSCALE_PALMTT5 XSCALE_PALMTT5 917
xscale_palmtc MACH_OMAP_PALMTC OMAP_PALMTC 918
omap_apollon MACH_OMAP_APOLLON OMAP_APOLLON 919
argonlvevb MACH_ARGONLVEVB ARGONLVEVB 920
rea_2d MACH_REA_2D REA_2D 921
eti3e524 MACH_TI3E524 TI3E524 922
ateb9200 MACH_ATEB9200 ATEB9200 923
auckland MACH_AUCKLAND AUCKLAND 924
ak3220m MACH_AK3320M AK3320M 925
duramax MACH_DURAMAX DURAMAX 926
n35 MACH_N35 N35 927
drivers/amba/bus.c
View file @ 3995f4c5
......@@ -15,7 +15,6 @@
#include <linux/amba/bus.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/sizes.h>
#define to_amba_device(d) container_of(d, struct amba_device, dev)
......
drivers/input/serio/sa1111ps2.c
View file @ 3995f4c5
......@@ -20,7 +20,6 @@
#include <linux/spinlock.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/system.h>
#include <asm/hardware/sa1111.h>
......
drivers/mtd/maps/Kconfig
View file @ 3995f4c5
......@@ -473,14 +473,6 @@ config MTD_IXP2000
IXDP425 and Coyote. If you have an IXP2000 based board and
would like to use the flash chips on it, say 'Y'.
config MTD_EPXA10DB
tristate "CFI Flash device mapped on Epxa10db"
depends on MTD_CFI && MTD_PARTITIONS && ARCH_CAMELOT
help
This enables support for the flash devices on the Altera
Excalibur XA10 Development Board. If you are building a kernel
for on of these boards then you should say 'Y' otherwise say 'N'.
config MTD_FORTUNET
tristate "CFI Flash device mapped on the FortuNet board"
depends on MTD_CFI && MTD_PARTITIONS && SA1100_FORTUNET
......
drivers/mtd/maps/Makefile
View file @ 3995f4c5
......@@ -15,7 +15,6 @@ obj-$(CONFIG_MTD_CFI_FLAGADM) += cfi_flagadm.o
obj-$(CONFIG_MTD_CSTM_MIPS_IXX) += cstm_mips_ixx.o
obj-$(CONFIG_MTD_DC21285) += dc21285.o
obj-$(CONFIG_MTD_DILNETPC) += dilnetpc.o
obj-$(CONFIG_MTD_EPXA10DB) += epxa10db-flash.o
obj-$(CONFIG_MTD_IQ80310) += iq80310.o
obj-$(CONFIG_MTD_L440GX) += l440gx.o
obj-$(CONFIG_MTD_AMD76XROM) += amd76xrom.o
......
drivers/mtd/maps/epxa10db-flash.c deleted 100644 → 0
View file @ 05814450
/*
* Flash memory access on EPXA based devices
*
* (C) 2000 Nicolas Pitre <nico@cam.org>
* Copyright (C) 2001 Altera Corporation
* Copyright (C) 2001 Red Hat, Inc.
*
* $Id: epxa10db-flash.c,v 1.15 2005/11/07 11:14:27 gleixner Exp $
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/config.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/partitions.h>
#include <asm/io.h>
#include <asm/hardware.h>
#ifdef CONFIG_EPXA10DB
#define BOARD_NAME "EPXA10DB"
#else
#define BOARD_NAME "EPXA1DB"
#endif
static int nr_parts = 0;
static struct mtd_partition *parts;
static struct mtd_info *mymtd;
static int epxa_default_partitions(struct mtd_info *master, struct mtd_partition **pparts);
static struct map_info epxa_map = {
.name = "EPXA flash",
.size = FLASH_SIZE,
.bankwidth = 2,
.phys = FLASH_START,
};
static const char *probes[] = { "RedBoot", "afs", NULL };
static int __init epxa_mtd_init(void)
{
int i;
printk(KERN_NOTICE "%s flash device: 0x%x at 0x%x\n", BOARD_NAME, FLASH_SIZE, FLASH_START);
epxa_map.virt = ioremap(FLASH_START, FLASH_SIZE);
if (!epxa_map.virt) {
printk("Failed to ioremap %s flash\n",BOARD_NAME);
return -EIO;
}
simple_map_init(&epxa_map);
mymtd = do_map_probe("cfi_probe", &epxa_map);
if (!mymtd) {
iounmap((void *)epxa_map.virt);
return -ENXIO;
}
mymtd->owner = THIS_MODULE;
/* Unlock the flash device. */
if(mymtd->unlock){
for (i=0; i<mymtd->numeraseregions;i++){
int j;
for(j=0;j<mymtd->eraseregions[i].numblocks;j++){
mymtd->unlock(mymtd,mymtd->eraseregions[i].offset + j * mymtd->eraseregions[i].erasesize,mymtd->eraseregions[i].erasesize);
}
}
}
#ifdef CONFIG_MTD_PARTITIONS
nr_parts = parse_mtd_partitions(mymtd, probes, &parts, 0);
if (nr_parts > 0) {
add_mtd_partitions(mymtd, parts, nr_parts);
return 0;
}
#endif
/* No recognised partitioning schemes found - use defaults */
nr_parts = epxa_default_partitions(mymtd, &parts);
if (nr_parts > 0) {
add_mtd_partitions(mymtd, parts, nr_parts);
return 0;
}
/* If all else fails... */
add_mtd_device(mymtd);
return 0;
}
static void __exit epxa_mtd_cleanup(void)
{
if (mymtd) {
if (nr_parts)
del_mtd_partitions(mymtd);
else
del_mtd_device(mymtd);
map_destroy(mymtd);
}
if (epxa_map.virt) {
iounmap((void *)epxa_map.virt);
epxa_map.virt = 0;
}
}
/*
* This will do for now, once we decide which bootldr we're finally
* going to use then we'll remove this function and do it properly
*
* Partions are currently (as offsets from base of flash):
* 0x00000000 - 0x003FFFFF - bootloader (!)
* 0x00400000 - 0x00FFFFFF - Flashdisk
*/
static int __init epxa_default_partitions(struct mtd_info *master, struct mtd_partition **pparts)
{
struct mtd_partition *parts;
int ret, i;
int npartitions = 0;
char *names;
const char *name = "jffs";
printk("Using default partitions for %s\n",BOARD_NAME);
npartitions=1;
parts = kmalloc(npartitions*sizeof(*parts)+strlen(name), GFP_KERNEL);
memzero(parts,npartitions*sizeof(*parts)+strlen(name));
if (!parts) {
ret = -ENOMEM;
goto out;
}
i=0;
names = (char *)&parts[npartitions];
parts[i].name = names;
names += strlen(name) + 1;
strcpy(parts[i].name, name);
#ifdef CONFIG_EPXA10DB
parts[i].size = FLASH_SIZE-0x00400000;
parts[i].offset = 0x00400000;
#else
parts[i].size = FLASH_SIZE-0x00180000;
parts[i].offset = 0x00180000;
#endif
out:
*pparts = parts;
return npartitions;
}
module_init(epxa_mtd_init);
module_exit(epxa_mtd_cleanup);
MODULE_AUTHOR("Clive Davies");
MODULE_DESCRIPTION("Altera epxa mtd flash map");
MODULE_LICENSE("GPL");
drivers/net/arm/Kconfig
View file @ 3995f4c5
......@@ -31,16 +31,3 @@ config ARM_ETHERH
help
If you have an Acorn system with one of these network cards, you
should say Y to this option if you wish to use it with Linux.
config ARM_ETHER00
tristate "Altera Ether00 support"
depends on NET_ETHERNET && ARM && ARCH_CAMELOT
help
This is the driver for Altera's ether00 ethernet mac IP core. Say
Y here if you want to build support for this into the kernel. It
is also available as a module (say M here) that can be inserted/
removed from the kernel at the same time as the PLD is configured.
If this driver is running on an epxa10 development board then it
will generate a suitable hw address based on the board serial
number (MTD support is required for this). Otherwise you will
need to set a suitable hw address using ifconfig.
drivers/net/arm/Makefile
View file @ 3995f4c5
......@@ -4,7 +4,6 @@
#
obj-$(CONFIG_ARM_AM79C961A) += am79c961a.o
obj-$(CONFIG_ARM_ETHER00) += ether00.o
obj-$(CONFIG_ARM_ETHERH) += etherh.o
obj-$(CONFIG_ARM_ETHER3) += ether3.o
obj-$(CONFIG_ARM_ETHER1) += ether1.o
drivers/net/arm/am79c961a.c
View file @ 3995f4c5
......@@ -668,9 +668,8 @@ static void __init am79c961_banner(void)
printk(KERN_INFO "%s", version);
}
static int __init am79c961_probe(struct device *_dev)
static int __init am79c961_probe(struct platform_device *pdev)
{
struct platform_device *pdev = to_platform_device(_dev);
struct resource *res;
struct net_device *dev;
struct dev_priv *priv;
......@@ -758,15 +757,16 @@ static int __init am79c961_probe(struct device *_dev)
return ret;
}
static struct device_driver am79c961_driver = {
.name = "am79c961",
.bus = &platform_bus_type,
static struct platform_driver am79c961_driver = {
.probe = am79c961_probe,
.driver = {
.name = "am79c961",
},
};
static int __init am79c961_init(void)
{
return driver_register(&am79c961_driver);
return platform_driver_register(&am79c961_driver);
}
__initcall(am79c961_init);
drivers/net/arm/ether00.c deleted 100644 → 0
View file @ 05814450
/*
* drivers/net/ether00.c
*
* Copyright (C) 2001 Altera Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/* includes */
#include <linux/config.h>
#include <linux/pci.h>
#include <linux/sched.h>
#include <linux/netdevice.h>
#include <linux/skbuff.h>
#include <linux/etherdevice.h>
#include <linux/module.h>
#include <linux/tqueue.h>
#include <linux/mtd/mtd.h>
#include <linux/pld/pld_hotswap.h>
#include <asm/arch/excalibur.h>
#include <asm/arch/hardware.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/sizes.h>
#include <asm/arch/ether00.h>
#include <asm/arch/tdkphy.h>
MODULE_AUTHOR("Clive Davies");
MODULE_DESCRIPTION("Altera Ether00 IP core driver");
MODULE_LICENSE("GPL");
#define PKT_BUF_SZ 1540 /* Size of each rx buffer */
#define ETH_NR 4 /* Number of MACs this driver supports */
#define DEBUG(x)
#define __dma_va(x) (unsigned int)((unsigned int)priv->dma_data+(((unsigned int)(x))&(EXC_SPSRAM_BLOCK0_SIZE-1)))
#define __dma_pa(x) (unsigned int)(EXC_SPSRAM_BLOCK0_BASE+(((unsigned int)(x))-(unsigned int)priv->dma_data))
#define ETHER00_BASE 0
#define ETHER00_TYPE
#define ETHER00_NAME "ether00"
#define MAC_REG_SIZE 0x400 /* size of MAC register area */
/* typedefs */
/* The definition of the driver control structure */
#define RX_NUM_BUFF 10
#define RX_NUM_FDESC 10
#define TX_NUM_FDESC 10
struct tx_fda_ent{
FDA_DESC fd;
BUF_DESC bd;
BUF_DESC pad;
};
struct rx_fda_ent{
FDA_DESC fd;
BUF_DESC bd;
BUF_DESC pad;
};
struct rx_blist_ent{
FDA_DESC fd;
BUF_DESC bd;
BUF_DESC pad;
};
struct net_priv
{
struct net_device_stats stats;
struct sk_buff* skb;
void* dma_data;
struct rx_blist_ent* rx_blist_vp;
struct rx_fda_ent* rx_fda_ptr;
struct tx_fda_ent* tx_fdalist_vp;
struct tq_struct tq_memupdate;
unsigned char memupdate_scheduled;
unsigned char rx_disabled;
unsigned char queue_stopped;
spinlock_t rx_lock;
};
static const char vendor_id[2]={0x07,0xed};
#ifdef ETHER00_DEBUG
/* Dump (most) registers for debugging puposes */
static void dump_regs(struct net_device *dev){
struct net_priv* priv=dev->priv;
unsigned int* i;
printk("\n RX free descriptor area:\n");
for(i=(unsigned int*)priv->rx_fda_ptr;
i<((unsigned int*)(priv->rx_fda_ptr+RX_NUM_FDESC));){
printk("%#8x %#8x %#8x %#8x\n",*i,*(i+1),*(i+2),*(i+3));
i+=4;
}
printk("\n RX buffer list:\n");
for(i=(unsigned int*)priv->rx_blist_vp;
i<((unsigned int*)(priv->rx_blist_vp+RX_NUM_BUFF));){
printk("%#8x %#8x %#8x %#8x\n",*i,*(i+1),*(i+2),*(i+3));
i+=4;
}
printk("\n TX frame descriptor list:\n");
for(i=(unsigned int*)priv->tx_fdalist_vp;
i<((unsigned int*)(priv->tx_fdalist_vp+TX_NUM_FDESC));){
printk("%#8x %#8x %#8x %#8x\n",*i,*(i+1),*(i+2),*(i+3));
i+=4;
}
printk("\ndma ctl=%#x\n",readw(ETHER_DMA_CTL(dev->base_addr)));
printk("txfrmptr=%#x\n",readw(ETHER_TXFRMPTR(dev->base_addr)));
printk("txthrsh=%#x\n",readw(ETHER_TXTHRSH(dev->base_addr)));
printk("txpollctr=%#x\n",readw(ETHER_TXPOLLCTR(dev->base_addr)));
printk("blfrmptr=%#x\n",readw(ETHER_BLFRMPTR(dev->base_addr)));
printk("rxfragsize=%#x\n",readw(ETHER_RXFRAGSIZE(dev->base_addr)));
printk("tx_int_en=%#x\n",readw(ETHER_INT_EN(dev->base_addr)));
printk("fda_bas=%#x\n",readw(ETHER_FDA_BAS(dev->base_addr)));
printk("fda_lim=%#x\n",readw(ETHER_FDA_LIM(dev->base_addr)));
printk("int_src=%#x\n",readw(ETHER_INT_SRC(dev->base_addr)));
printk("pausecnt=%#x\n",readw(ETHER_PAUSECNT(dev->base_addr)));
printk("rempaucnt=%#x\n",readw(ETHER_REMPAUCNT(dev->base_addr)));
printk("txconfrmstat=%#x\n",readw(ETHER_TXCONFRMSTAT(dev->base_addr)));
printk("mac_ctl=%#x\n",readw(ETHER_MAC_CTL(dev->base_addr)));
printk("arc_ctl=%#x\n",readw(ETHER_ARC_CTL(dev->base_addr)));
printk("tx_ctl=%#x\n",readw(ETHER_TX_CTL(dev->base_addr)));
}
#endif /* ETHER00_DEBUG */
static int ether00_write_phy(struct net_device *dev, short address, short value)
{
volatile int count = 1024;
writew(value,ETHER_MD_DATA(dev->base_addr));
writew( ETHER_MD_CA_BUSY_MSK |
ETHER_MD_CA_WR_MSK |
(address & ETHER_MD_CA_ADDR_MSK),
ETHER_MD_CA(dev->base_addr));
/* Wait for the command to complete */
while((readw(ETHER_MD_CA(dev->base_addr)) & ETHER_MD_CA_BUSY_MSK)&&count){
count--;
}
if (!count){
printk("Write to phy failed, addr=%#x, data=%#x\n",address, value);
return -EIO;
}
return 0;
}
static int ether00_read_phy(struct net_device *dev, short address)
{
volatile int count = 1024;
writew( ETHER_MD_CA_BUSY_MSK |
(address & ETHER_MD_CA_ADDR_MSK),
ETHER_MD_CA(dev->base_addr));
/* Wait for the command to complete */
while((readw(ETHER_MD_CA(dev->base_addr)) & ETHER_MD_CA_BUSY_MSK)&&count){
count--;
}
if (!count){
printk(KERN_WARNING "Read from phy timed out\n");
return -EIO;
}
return readw(ETHER_MD_DATA(dev->base_addr));
}
static void ether00_phy_int(int irq_num, void* dev_id, struct pt_regs* regs)
{
struct net_device* dev=dev_id;
int irq_status;
irq_status=ether00_read_phy(dev, PHY_IRQ_CONTROL);
if(irq_status & PHY_IRQ_CONTROL_ANEG_COMP_INT_MSK){
/*
* Autonegotiation complete on epxa10db. The mac doesn't
* twig if we're in full duplex so we need to check the
* phy status register and configure the mac accordingly
*/
if(ether00_read_phy(dev, PHY_STATUS)&(PHY_STATUS_10T_F_MSK|PHY_STATUS_100_X_F_MSK)){
int tmp;
tmp=readl(ETHER_MAC_CTL(dev->base_addr));
writel(tmp|ETHER_MAC_CTL_FULLDUP_MSK,ETHER_MAC_CTL(dev->base_addr));
}
}
if(irq_status&PHY_IRQ_CONTROL_LS_CHG_INT_MSK){
if(ether00_read_phy(dev, PHY_STATUS)& PHY_STATUS_LINK_MSK){
/* Link is up */
netif_carrier_on(dev);
//printk("Carrier on\n");
}else{
netif_carrier_off(dev);
//printk("Carrier off\n");
}
}
}
static void setup_blist_entry(struct sk_buff* skb,struct rx_blist_ent* blist_ent_ptr){
/* Make the buffer consistent with the cache as the mac is going to write
* directly into it*/
blist_ent_ptr->fd.FDSystem=(unsigned int)skb;
blist_ent_ptr->bd.BuffData=(char*)__pa(skb->data);
consistent_sync(skb->data,PKT_BUF_SZ,PCI_DMA_FROMDEVICE);
/* align IP on 16 Byte (DMA_CTL set to skip 2 bytes) */
skb_reserve(skb,2);
blist_ent_ptr->bd.BuffLength=PKT_BUF_SZ-2;
blist_ent_ptr->fd.FDLength=1;
blist_ent_ptr->fd.FDCtl=FDCTL_COWNSFD_MSK;
blist_ent_ptr->bd.BDCtl=BDCTL_COWNSBD_MSK;
}
static int ether00_mem_init(struct net_device* dev)
{
struct net_priv* priv=dev->priv;
struct tx_fda_ent *tx_fd_ptr,*tx_end_ptr;
struct rx_blist_ent* blist_ent_ptr;
int i;
/*
* Grab a block of on chip SRAM to contain the control stuctures for
* the ethernet MAC. This uncached becuase it needs to be accesses by both
* bus masters (cpu + mac). However, it shouldn't matter too much in terms
* of speed as its on chip memory
*/
priv->dma_data=ioremap_nocache(EXC_SPSRAM_BLOCK0_BASE,EXC_SPSRAM_BLOCK0_SIZE );
if (!priv->dma_data)
return -ENOMEM;
priv->rx_fda_ptr=(struct rx_fda_ent*)priv->dma_data;
/*
* Now share it out amongst the Frame descriptors and the buffer list
*/
priv->rx_blist_vp=(struct rx_blist_ent*)((unsigned int)priv->dma_data+RX_NUM_FDESC*sizeof(struct rx_fda_ent));
/*
*Initalise the FDA list
*/
/* set ownership to the controller */
memset(priv->rx_fda_ptr,0x80,RX_NUM_FDESC*sizeof(struct rx_fda_ent));
/*
*Initialise the buffer list
*/
blist_ent_ptr=priv->rx_blist_vp;
i=0;
while(blist_ent_ptr<(priv->rx_blist_vp+RX_NUM_BUFF)){
struct sk_buff *skb;
blist_ent_ptr->fd.FDLength=1;
skb=dev_alloc_skb(PKT_BUF_SZ);
if(skb){
setup_blist_entry(skb,blist_ent_ptr);
blist_ent_ptr->fd.FDNext=(FDA_DESC*)__dma_pa(blist_ent_ptr+1);
blist_ent_ptr->bd.BDStat=i++;
blist_ent_ptr++;
}
else
{
printk("Failed to initalise buffer list\n");
}
}
blist_ent_ptr--;
blist_ent_ptr->fd.FDNext=(FDA_DESC*)__dma_pa(priv->rx_blist_vp);
priv->tx_fdalist_vp=(struct tx_fda_ent*)(priv->rx_blist_vp+RX_NUM_BUFF);
/* Initialise the buffers to be a circular list. The mac will then go poll
* the list until it finds a frame ready to transmit */
tx_end_ptr=priv->tx_fdalist_vp+TX_NUM_FDESC;
for(tx_fd_ptr=priv->tx_fdalist_vp;tx_fd_ptr<tx_end_ptr;tx_fd_ptr++){
tx_fd_ptr->fd.FDNext=(FDA_DESC*)__dma_pa((tx_fd_ptr+1));
tx_fd_ptr->fd.FDCtl=1;
tx_fd_ptr->fd.FDStat=0;
tx_fd_ptr->fd.FDLength=1;
}
/* Change the last FDNext pointer to make a circular list */
tx_fd_ptr--;
tx_fd_ptr->fd.FDNext=(FDA_DESC*)__dma_pa(priv->tx_fdalist_vp);
/* Point the device at the chain of Rx and Tx Buffers */
writel((unsigned int)__dma_pa(priv->rx_fda_ptr),ETHER_FDA_BAS(dev->base_addr));
writel((RX_NUM_FDESC-1)*sizeof(struct rx_fda_ent),ETHER_FDA_LIM(dev->base_addr));
writel((unsigned int)__dma_pa(priv->rx_blist_vp),ETHER_BLFRMPTR(dev->base_addr));
writel((unsigned int)__dma_pa(priv->tx_fdalist_vp),ETHER_TXFRMPTR(dev->base_addr));
return 0;
}
void ether00_mem_update(void* dev_id)
{
struct net_device* dev=dev_id;
struct net_priv* priv=dev->priv;
struct sk_buff* skb;
struct tx_fda_ent *fda_ptr=priv->tx_fdalist_vp;
struct rx_blist_ent* blist_ent_ptr;
unsigned long flags;
priv->tq_memupdate.sync=0;
//priv->tq_memupdate.list=
priv->memupdate_scheduled=0;
/* Transmit interrupt */
while(fda_ptr<(priv->tx_fdalist_vp+TX_NUM_FDESC)){
if(!(FDCTL_COWNSFD_MSK&fda_ptr->fd.FDCtl) && (ETHER_TX_STAT_COMP_MSK&fda_ptr->fd.FDStat)){
priv->stats.tx_packets++;
priv->stats.tx_bytes+=fda_ptr->bd.BuffLength;
skb=(struct sk_buff*)fda_ptr->fd.FDSystem;
//printk("%d:txcln:fda=%#x skb=%#x\n",jiffies,fda_ptr,skb);
dev_kfree_skb(skb);
fda_ptr->fd.FDSystem=0;
fda_ptr->fd.FDStat=0;
fda_ptr->fd.FDCtl=0;
}
fda_ptr++;
}
/* Fill in any missing buffers from the received queue */
spin_lock_irqsave(&priv->rx_lock,flags);
blist_ent_ptr=priv->rx_blist_vp;
while(blist_ent_ptr<(priv->rx_blist_vp+RX_NUM_BUFF)){
/* fd.FDSystem of 0 indicates we failed to allocate the buffer in the ISR */
if(!blist_ent_ptr->fd.FDSystem){
struct sk_buff *skb;
skb=dev_alloc_skb(PKT_BUF_SZ);
blist_ent_ptr->fd.FDSystem=(unsigned int)skb;
if(skb){
setup_blist_entry(skb,blist_ent_ptr);
}
else
{
break;
}
}
blist_ent_ptr++;
}
spin_unlock_irqrestore(&priv->rx_lock,flags);
if(priv->queue_stopped){
//printk("%d:cln:start q\n",jiffies);
netif_start_queue(dev);
}
if(priv->rx_disabled){
//printk("%d:enable_irq\n",jiffies);
priv->rx_disabled=0;
writel(ETHER_RX_CTL_RXEN_MSK,ETHER_RX_CTL(dev->base_addr));
}
}
static void ether00_int( int irq_num, void* dev_id, struct pt_regs* regs)
{
struct net_device* dev=dev_id;
struct net_priv* priv=dev->priv;
unsigned int interruptValue;
interruptValue=readl(ETHER_INT_SRC(dev->base_addr));
//printk("INT_SRC=%x\n",interruptValue);
if(!(readl(ETHER_INT_SRC(dev->base_addr)) & ETHER_INT_SRC_IRQ_MSK))
{
return; /* Interrupt wasn't caused by us!! */
}
if(readl(ETHER_INT_SRC(dev->base_addr))&
(ETHER_INT_SRC_INTMACRX_MSK |
ETHER_INT_SRC_FDAEX_MSK |
ETHER_INT_SRC_BLEX_MSK)) {
struct rx_blist_ent* blist_ent_ptr;
struct rx_fda_ent* fda_ent_ptr;
struct sk_buff* skb;
fda_ent_ptr=priv->rx_fda_ptr;
spin_lock(&priv->rx_lock);
while(fda_ent_ptr<(priv->rx_fda_ptr+RX_NUM_FDESC)){
int result;
if(!(fda_ent_ptr->fd.FDCtl&FDCTL_COWNSFD_MSK))
{
/* This frame is ready for processing */
/*find the corresponding buffer in the bufferlist */
blist_ent_ptr=priv->rx_blist_vp+fda_ent_ptr->bd.BDStat;
skb=(struct sk_buff*)blist_ent_ptr->fd.FDSystem;
/* Pass this skb up the stack */
skb->dev=dev;
skb_put(skb,fda_ent_ptr->fd.FDLength);
skb->protocol=eth_type_trans(skb,dev);
skb->ip_summed=CHECKSUM_UNNECESSARY;
result=netif_rx(skb);
/* Update statistics */
priv->stats.rx_packets++;
priv->stats.rx_bytes+=fda_ent_ptr->fd.FDLength;
/* Free the FDA entry */
fda_ent_ptr->bd.BDStat=0xff;
fda_ent_ptr->fd.FDCtl=FDCTL_COWNSFD_MSK;
/* Allocate a new skb and point the bd entry to it */
blist_ent_ptr->fd.FDSystem=0;
skb=dev_alloc_skb(PKT_BUF_SZ);
//printk("allocskb=%#x\n",skb);
if(skb){
setup_blist_entry(skb,blist_ent_ptr);
}
else if(!priv->memupdate_scheduled){
int tmp;
/* There are no buffers at the moment, so schedule */
/* the background task to sort this out */
schedule_task(&priv->tq_memupdate);
priv->memupdate_scheduled=1;
printk(KERN_DEBUG "%s:No buffers",dev->name);
/* If this interrupt was due to a lack of buffers then
* we'd better stop the receiver too */
if(interruptValue&ETHER_INT_SRC_BLEX_MSK){
priv->rx_disabled=1;
tmp=readl(ETHER_INT_SRC(dev->base_addr));
writel(tmp&~ETHER_RX_CTL_RXEN_MSK,ETHER_RX_CTL(dev->base_addr));
printk(KERN_DEBUG "%s:Halting rx",dev->name);
}
}
}
fda_ent_ptr++;
}
spin_unlock(&priv->rx_lock);
/* Clear the interrupts */
writel(ETHER_INT_SRC_INTMACRX_MSK | ETHER_INT_SRC_FDAEX_MSK
| ETHER_INT_SRC_BLEX_MSK,ETHER_INT_SRC(dev->base_addr));
}
if(readl(ETHER_INT_SRC(dev->base_addr))&ETHER_INT_SRC_INTMACTX_MSK){
if(!priv->memupdate_scheduled){
schedule_task(&priv->tq_memupdate);
priv->memupdate_scheduled=1;
}
/* Clear the interrupt */
writel(ETHER_INT_SRC_INTMACTX_MSK,ETHER_INT_SRC(dev->base_addr));
}
if (readl(ETHER_INT_SRC(dev->base_addr)) & (ETHER_INT_SRC_SWINT_MSK|
ETHER_INT_SRC_INTEARNOT_MSK|
ETHER_INT_SRC_INTLINK_MSK|
ETHER_INT_SRC_INTEXBD_MSK|
ETHER_INT_SRC_INTTXCTLCMP_MSK))
{
/*
* Not using any of these so they shouldn't happen
*
* In the cased of INTEXBD - if you allocate more
* than 28 decsriptors you may need to think about this
*/
printk("Not using this interrupt\n");
}
if (readl(ETHER_INT_SRC(dev->base_addr)) &
(ETHER_INT_SRC_INTSBUS_MSK |
ETHER_INT_SRC_INTNRABT_MSK
|ETHER_INT_SRC_DMPARERR_MSK))
{
/*
* Hardware errors, we can either ignore them and hope they go away
*or reset the device, I'll try the first for now to see if they happen
*/
printk("Hardware error\n");
}
}
static void ether00_setup_ethernet_address(struct net_device* dev)
{
int tmp;
dev->addr_len=6;
writew(0,ETHER_ARC_ADR(dev->base_addr));
writel((dev->dev_addr[0]<<24) |
(dev->dev_addr[1]<<16) |
(dev->dev_addr[2]<<8) |
dev->dev_addr[3],
ETHER_ARC_DATA(dev->base_addr));
writew(4,ETHER_ARC_ADR(dev->base_addr));
tmp=readl(ETHER_ARC_DATA(dev->base_addr));
tmp&=0xffff;
tmp|=(dev->dev_addr[4]<<24) | (dev->dev_addr[5]<<16);
writel(tmp, ETHER_ARC_DATA(dev->base_addr));
/* Enable this entry in the ARC */
writel(1,ETHER_ARC_ENA(dev->base_addr));
return;
}
static void ether00_reset(struct net_device *dev)
{
/* reset the controller */
writew(ETHER_MAC_CTL_RESET_MSK,ETHER_MAC_CTL(dev->base_addr));
/*
* Make sure we're not going to send anything
*/
writew(ETHER_TX_CTL_TXHALT_MSK,ETHER_TX_CTL(dev->base_addr));
/*
* Make sure we're not going to receive anything
*/
writew(ETHER_RX_CTL_RXHALT_MSK,ETHER_RX_CTL(dev->base_addr));
/*
* Disable Interrupts for now, and set the burst size to 8 bytes
*/
writel(ETHER_DMA_CTL_INTMASK_MSK |
((8 << ETHER_DMA_CTL_DMBURST_OFST) & ETHER_DMA_CTL_DMBURST_MSK)
|(2<<ETHER_DMA_CTL_RXALIGN_OFST),
ETHER_DMA_CTL(dev->base_addr));
/*
* Set TxThrsh - start transmitting a packet after 1514
* bytes or when a packet is complete, whichever comes first
*/
writew(1514,ETHER_TXTHRSH(dev->base_addr));
/*
* Set TxPollCtr. Each cycle is
* 61.44 microseconds with a 33 MHz bus
*/
writew(1,ETHER_TXPOLLCTR(dev->base_addr));
/*
* Set Rx_Ctl - Turn off reception and let RxData turn it
* on later
*/
writew(ETHER_RX_CTL_RXHALT_MSK,ETHER_RX_CTL(dev->base_addr));
}
static void ether00_set_multicast(struct net_device* dev)
{
int count=dev->mc_count;
/* Set promiscuous mode if it's asked for. */
if (dev->flags&IFF_PROMISC){
writew( ETHER_ARC_CTL_COMPEN_MSK |
ETHER_ARC_CTL_BROADACC_MSK |
ETHER_ARC_CTL_GROUPACC_MSK |
ETHER_ARC_CTL_STATIONACC_MSK,
ETHER_ARC_CTL(dev->base_addr));
return;
}
/*
* Get all multicast packets if required, or if there are too
* many addresses to fit in hardware
*/
if (dev->flags & IFF_ALLMULTI){
writew( ETHER_ARC_CTL_COMPEN_MSK |
ETHER_ARC_CTL_GROUPACC_MSK |
ETHER_ARC_CTL_BROADACC_MSK,
ETHER_ARC_CTL(dev->base_addr));
return;
}
if (dev->mc_count > (ETHER_ARC_SIZE - 1)){
printk(KERN_WARNING "Too many multicast addresses for hardware to filter - receiving all multicast packets\n");
writew( ETHER_ARC_CTL_COMPEN_MSK |
ETHER_ARC_CTL_GROUPACC_MSK |
ETHER_ARC_CTL_BROADACC_MSK,
ETHER_ARC_CTL(dev->base_addr));
return;
}
if(dev->mc_count){
struct dev_mc_list *mc_list_ent=dev->mc_list;
unsigned int temp,i;
DEBUG(printk("mc_count=%d mc_list=%#x\n",dev-> mc_count, dev->mc_list));
DEBUG(printk("mc addr=%02#x%02x%02x%02x%02x%02x\n",
mc_list_ent->dmi_addr[5],
mc_list_ent->dmi_addr[4],
mc_list_ent->dmi_addr[3],
mc_list_ent->dmi_addr[2],
mc_list_ent->dmi_addr[1],
mc_list_ent->dmi_addr[0]);)
/*
* The first 6 bytes are the MAC address, so
* don't change them!
*/
writew(4,ETHER_ARC_ADR(dev->base_addr));
temp=readl(ETHER_ARC_DATA(dev->base_addr));
temp&=0xffff0000;
/* Disable the current multicast stuff */
writel(1,ETHER_ARC_ENA(dev->base_addr));
for(;;){
temp|=mc_list_ent->dmi_addr[1] |
mc_list_ent->dmi_addr[0]<<8;
writel(temp,ETHER_ARC_DATA(dev->base_addr));
i=readl(ETHER_ARC_ADR(dev->base_addr));
writew(i+4,ETHER_ARC_ADR(dev->base_addr));
temp=mc_list_ent->dmi_addr[5]|
mc_list_ent->dmi_addr[4]<<8 |
mc_list_ent->dmi_addr[3]<<16 |
mc_list_ent->dmi_addr[2]<<24;
writel(temp,ETHER_ARC_DATA(dev->base_addr));
count--;
if(!mc_list_ent->next || !count){
break;
}
DEBUG(printk("mc_list_next=%#x\n",mc_list_ent->next);)
mc_list_ent=mc_list_ent->next;
i=readl(ETHER_ARC_ADR(dev->base_addr));
writel(i+4,ETHER_ARC_ADR(dev->base_addr));
temp=mc_list_ent->dmi_addr[3]|
mc_list_ent->dmi_addr[2]<<8 |
mc_list_ent->dmi_addr[1]<<16 |
mc_list_ent->dmi_addr[0]<<24;
writel(temp,ETHER_ARC_DATA(dev->base_addr));
i=readl(ETHER_ARC_ADR(dev->base_addr));
writel(i+4,ETHER_ARC_ADR(dev->base_addr));
temp=mc_list_ent->dmi_addr[4]<<16 |
mc_list_ent->dmi_addr[5]<<24;
writel(temp,ETHER_ARC_DATA(dev->base_addr));
count--;
if(!mc_list_ent->next || !count){
break;
}
mc_list_ent=mc_list_ent->next;
}
if(count)
printk(KERN_WARNING "Multicast list size error\n");
writew( ETHER_ARC_CTL_BROADACC_MSK|
ETHER_ARC_CTL_COMPEN_MSK,
ETHER_ARC_CTL(dev->base_addr));
}
/* enable the active ARC enties */
writew((1<<(count+2))-1,ETHER_ARC_ENA(dev->base_addr));
}
static int ether00_open(struct net_device* dev)
{
int result,tmp;
struct net_priv* priv;
if (!is_valid_ether_addr(dev->dev_addr))
return -EINVAL;
/* Install interrupt handlers */
result=request_irq(dev->irq,ether00_int,0,"ether00",dev);
if(result)
goto open_err1;
result=request_irq(2,ether00_phy_int,0,"ether00_phy",dev);
if(result)
goto open_err2;
ether00_reset(dev);
result=ether00_mem_init(dev);
if(result)
goto open_err3;
ether00_setup_ethernet_address(dev);
ether00_set_multicast(dev);
result=ether00_write_phy(dev,PHY_CONTROL, PHY_CONTROL_ANEGEN_MSK | PHY_CONTROL_RANEG_MSK);
if(result)
goto open_err4;
result=ether00_write_phy(dev,PHY_IRQ_CONTROL, PHY_IRQ_CONTROL_LS_CHG_IE_MSK |
PHY_IRQ_CONTROL_ANEG_COMP_IE_MSK);
if(result)
goto open_err4;
/* Start the device enable interrupts */
writew(ETHER_RX_CTL_RXEN_MSK
// | ETHER_RX_CTL_STRIPCRC_MSK
| ETHER_RX_CTL_ENGOOD_MSK
| ETHER_RX_CTL_ENRXPAR_MSK| ETHER_RX_CTL_ENLONGERR_MSK
| ETHER_RX_CTL_ENOVER_MSK| ETHER_RX_CTL_ENCRCERR_MSK,
ETHER_RX_CTL(dev->base_addr));
writew(ETHER_TX_CTL_TXEN_MSK|
ETHER_TX_CTL_ENEXDEFER_MSK|
ETHER_TX_CTL_ENLCARR_MSK|
ETHER_TX_CTL_ENEXCOLL_MSK|
ETHER_TX_CTL_ENLATECOLL_MSK|
ETHER_TX_CTL_ENTXPAR_MSK|
ETHER_TX_CTL_ENCOMP_MSK,
ETHER_TX_CTL(dev->base_addr));
tmp=readl(ETHER_DMA_CTL(dev->base_addr));
writel(tmp&~ETHER_DMA_CTL_INTMASK_MSK,ETHER_DMA_CTL(dev->base_addr));
return 0;
open_err4:
ether00_reset(dev);
open_err3:
free_irq(2,dev);
open_err2:
free_irq(dev->irq,dev);
open_err1:
return result;
}
static int ether00_tx(struct sk_buff* skb, struct net_device* dev)
{
struct net_priv *priv=dev->priv;
struct tx_fda_ent *fda_ptr;
int i;
/*
* Find an empty slot in which to stick the frame
*/
fda_ptr=(struct tx_fda_ent*)__dma_va(readl(ETHER_TXFRMPTR(dev->base_addr)));
i=0;
while(i<TX_NUM_FDESC){
if (fda_ptr->fd.FDStat||(fda_ptr->fd.FDCtl & FDCTL_COWNSFD_MSK)){
fda_ptr =(struct tx_fda_ent*) __dma_va((struct tx_fda_ent*)fda_ptr->fd.FDNext);
}
else {
break;
}
i++;
}
/* Write the skb data from the cache*/
consistent_sync(skb->data,skb->len,PCI_DMA_TODEVICE);
fda_ptr->bd.BuffData=(char*)__pa(skb->data);
fda_ptr->bd.BuffLength=(unsigned short)skb->len;
/* Save the pointer to the skb for freeing later */
fda_ptr->fd.FDSystem=(unsigned int)skb;
fda_ptr->fd.FDStat=0;
/* Pass ownership of the buffers to the controller */
fda_ptr->fd.FDCtl=1;
fda_ptr->fd.FDCtl|=FDCTL_COWNSFD_MSK;
/* If the next buffer in the list is full, stop the queue */
fda_ptr=(struct tx_fda_ent*)__dma_va(fda_ptr->fd.FDNext);
if ((fda_ptr->fd.FDStat)||(fda_ptr->fd.FDCtl & FDCTL_COWNSFD_MSK)){
netif_stop_queue(dev);
priv->queue_stopped=1;
}
return 0;
}
static struct net_device_stats *ether00_stats(struct net_device* dev)
{
struct net_priv *priv=dev->priv;
return &priv->stats;
}
static int ether00_stop(struct net_device* dev)
{
struct net_priv *priv=dev->priv;
int tmp;
/* Stop/disable the device. */
tmp=readw(ETHER_RX_CTL(dev->base_addr));
tmp&=~(ETHER_RX_CTL_RXEN_MSK | ETHER_RX_CTL_ENGOOD_MSK);
tmp|=ETHER_RX_CTL_RXHALT_MSK;
writew(tmp,ETHER_RX_CTL(dev->base_addr));
tmp=readl(ETHER_TX_CTL(dev->base_addr));
tmp&=~ETHER_TX_CTL_TXEN_MSK;
tmp|=ETHER_TX_CTL_TXHALT_MSK;
writel(tmp,ETHER_TX_CTL(dev->base_addr));
/* Free up system resources */
free_irq(dev->irq,dev);
free_irq(2,dev);
iounmap(priv->dma_data);
return 0;
}
static void ether00_get_ethernet_address(struct net_device* dev)
{
struct mtd_info *mymtd=NULL;
int i;
size_t retlen;
/*
* For the Epxa10 dev board (camelot), the ethernet MAC
* address is of the form 00:aa:aa:00:xx:xx where
* 00:aa:aa is the Altera vendor ID and xx:xx is the
* last 2 bytes of the board serial number, as programmed
* into the OTP area of the flash device on EBI1. If this
* isn't an expa10 dev board, or there's no mtd support to
* read the serial number from flash then we'll force the
* use to set their own mac address using ifconfig.
*/
#ifdef CONFIG_ARCH_CAMELOT
#ifdef CONFIG_MTD
/* get the mtd_info structure for the first mtd device*/
for(i=0;i<MAX_MTD_DEVICES;i++){
mymtd=get_mtd_device(NULL,i);
if(!mymtd||!strcmp(mymtd->name,"EPXA10DB flash"))
break;
}
if(!mymtd || !mymtd->read_user_prot_reg){
printk(KERN_WARNING "%s: Failed to read MAC address from flash\n",dev->name);
}else{
mymtd->read_user_prot_reg(mymtd,2,1,&retlen,&dev->dev_addr[5]);
mymtd->read_user_prot_reg(mymtd,3,1,&retlen,&dev->dev_addr[4]);
dev->dev_addr[3]=0;
dev->dev_addr[2]=vendor_id[1];
dev->dev_addr[1]=vendor_id[0];
dev->dev_addr[0]=0;
}
#else
printk(KERN_WARNING "%s: MTD support required to read MAC address from EPXA10 dev board\n", dev->name);
#endif
#endif
if (!is_valid_ether_addr(dev->dev_addr))
printk("%s: Invalid ethernet MAC address. Please set using "
"ifconfig\n", dev->name);
}
/*
* Keep a mapping of dev_info addresses -> port lines to use when
* removing ports dev==NULL indicates unused entry
*/
static struct net_device* dev_list[ETH_NR];
static int ether00_add_device(struct pldhs_dev_info* dev_info,void* dev_ps_data)
{
struct net_device *dev;
struct net_priv *priv;
void *map_addr;
int result;
int i;
i=0;
while(dev_list[i] && i < ETH_NR)
i++;
if(i==ETH_NR){
printk(KERN_WARNING "ether00: Maximum number of ports reached\n");
return 0;
}
if (!request_mem_region(dev_info->base_addr, MAC_REG_SIZE, "ether00"))
return -EBUSY;
dev = alloc_etherdev(sizeof(struct net_priv));
if(!dev) {
result = -ENOMEM;
goto out_release;
}
priv = dev->priv;
priv->tq_memupdate.routine=ether00_mem_update;
priv->tq_memupdate.data=(void*) dev;
spin_lock_init(&priv->rx_lock);
map_addr=ioremap_nocache(dev_info->base_addr,SZ_4K);
if(!map_addr){
result = -ENOMEM;
out_kfree;
}
dev->open=ether00_open;
dev->stop=ether00_stop;
dev->set_multicast_list=ether00_set_multicast;
dev->hard_start_xmit=ether00_tx;
dev->get_stats=ether00_stats;
ether00_get_ethernet_address(dev);
SET_MODULE_OWNER(dev);
dev->base_addr=(unsigned int)map_addr;
dev->irq=dev_info->irq;
dev->features=NETIF_F_DYNALLOC | NETIF_F_HW_CSUM;
result=register_netdev(dev);
if(result){
printk("Ether00: Error %i registering driver\n",result);
goto out_unmap;
}
printk("registered ether00 device at %#x\n",dev_info->base_addr);
dev_list[i]=dev;
return result;
out_unmap:
iounmap(map_addr);
out_kfree:
free_netdev(dev);
out_release:
release_mem_region(dev_info->base_addr, MAC_REG_SIZE);
return result;
}
static int ether00_remove_devices(void)
{
int i;
for(i=0;i<ETH_NR;i++){
if(dev_list[i]){
netif_device_detach(dev_list[i]);
unregister_netdev(dev_list[i]);
iounmap((void*)dev_list[i]->base_addr);
release_mem_region(dev_list[i]->base_addr, MAC_REG_SIZE);
free_netdev(dev_list[i]);
dev_list[i]=0;
}
}
return 0;
}
static struct pld_hotswap_ops ether00_pldhs_ops={
.name = ETHER00_NAME,
.add_device = ether00_add_device,
.remove_devices = ether00_remove_devices,
};
static void __exit ether00_cleanup_module(void)
{
int result;
result=ether00_remove_devices();
if(result)
printk(KERN_WARNING "ether00: failed to remove all devices\n");
pldhs_unregister_driver(ETHER00_NAME);
}
module_exit(ether00_cleanup_module);
static int __init ether00_mod_init(void)
{
printk("mod init\n");
return pldhs_register_driver(&ether00_pldhs_ops);
}
module_init(ether00_mod_init);
drivers/net/arm/ether3.c
View file @ 3995f4c5
......@@ -69,7 +69,6 @@
#include <asm/system.h>
#include <asm/ecard.h>
#include <asm/io.h>
#include <asm/irq.h>
static char version[] __initdata = "ether3 ethernet driver (c) 1995-2000 R.M.King v1.17\n";
......
drivers/net/arm/etherh.c
View file @ 3995f4c5
......@@ -50,7 +50,6 @@
#include <asm/system.h>
#include <asm/ecard.h>
#include <asm/io.h>
#include <asm/irq.h>
#include "../8390.h"
......
drivers/scsi/arm/acornscsi.c
View file @ 3995f4c5
......@@ -146,7 +146,6 @@
#include <asm/system.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/ecard.h>
#include "../scsi.h"
......
drivers/scsi/arm/arxescsi.c
View file @ 3995f4c5
......@@ -33,7 +33,6 @@
#include <asm/dma.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/ecard.h>
#include "../scsi.h"
......
drivers/scsi/arm/cumana_1.c
View file @ 3995f4c5
......@@ -13,7 +13,6 @@
#include <asm/ecard.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/system.h>
#include "../scsi.h"
......
drivers/scsi/arm/cumana_2.c
View file @ 3995f4c5
......@@ -31,7 +31,6 @@
#include <asm/dma.h>
#include <asm/ecard.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/pgtable.h>
#include "../scsi.h"
......
drivers/scsi/arm/eesox.c
View file @ 3995f4c5
......@@ -35,7 +35,6 @@
#include <linux/dma-mapping.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/dma.h>
#include <asm/ecard.h>
#include <asm/pgtable.h>
......
drivers/scsi/arm/powertec.c
View file @ 3995f4c5
......@@ -22,7 +22,6 @@
#include <asm/dma.h>
#include <asm/ecard.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/pgtable.h>
#include "../scsi.h"
......
drivers/serial/Kconfig
View file @ 3995f4c5
......@@ -369,29 +369,6 @@ config SERIAL_21285_CONSOLE
your boot loader (lilo or loadlin) about how to pass options to the
kernel at boot time.)
config SERIAL_UART00
bool "Excalibur serial port (uart00) support"
depends on ARM && ARCH_CAMELOT
select SERIAL_CORE
help
Say Y here if you want to use the hard logic uart on Excalibur. This
driver also supports soft logic implementations of this uart core.
config SERIAL_UART00_CONSOLE
bool "Support for console on Excalibur serial port"
depends on SERIAL_UART00
select SERIAL_CORE_CONSOLE
help
Say Y here if you want to support a serial console on an Excalibur
hard logic uart or uart00 IP core.
Even if you say Y here, the currently visible virtual console
(/dev/tty0) will still be used as the system console by default, but
you can alter that using a kernel command line option such as
"console=ttyS1". (Try "man bootparam" or see the documentation of
your boot loader (lilo or loadlin) about how to pass options to the
kernel at boot time.)
config SERIAL_MPSC
bool "Marvell MPSC serial port support"
depends on PPC32 && MV64X60
......
drivers/serial/Makefile
View file @ 3995f4c5
......@@ -29,7 +29,6 @@ obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
obj-$(CONFIG_SERIAL_PXA) += pxa.o
obj-$(CONFIG_SERIAL_SA1100) += sa1100.o
obj-$(CONFIG_SERIAL_S3C2410) += s3c2410.o
obj-$(CONFIG_SERIAL_UART00) += uart00.o
obj-$(CONFIG_SERIAL_SUNCORE) += suncore.o
obj-$(CONFIG_SERIAL_SUNZILOG) += sunzilog.o
obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o
......
drivers/serial/uart00.c deleted 100644 → 0
View file @ 05814450
/*
* linux/drivers/serial/uart00.c
*
* Driver for UART00 serial ports
*
* Based on drivers/char/serial_amba.c, by ARM Limited &
* Deep Blue Solutions Ltd.
* Copyright 2001 Altera Corporation
*
* Update for 2.6.4 by Dirk Behme <dirk.behme@de.bosch.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* $Id: uart00.c,v 1.35 2002/07/28 10:03:28 rmk Exp $
*
*/
#include <linux/config.h>
#if defined(CONFIG_SERIAL_UART00_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
#define SUPPORT_SYSRQ
#endif
#include <linux/module.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/console.h>
#include <linux/sysrq.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/serial_core.h>
#include <linux/serial.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/sizes.h>
#include <asm/arch/excalibur.h>
#define UART00_TYPE (volatile unsigned int*)
#include <asm/arch/uart00.h>
#include <asm/arch/int_ctrl00.h>
#define UART_NR 2
#define SERIAL_UART00_NAME "ttyUA"
#define SERIAL_UART00_MAJOR 204
#define SERIAL_UART00_MINOR 16 /* Temporary - will change in future */
#define SERIAL_UART00_NR UART_NR
#define UART_PORT_SIZE 0x50
#define UART00_ISR_PASS_LIMIT 256
/*
* Access macros for the UART00 UARTs
*/
#define UART_GET_INT_STATUS(p) inl(UART_ISR((p)->membase))
#define UART_PUT_IES(p, c) outl(c,UART_IES((p)->membase))
#define UART_GET_IES(p) inl(UART_IES((p)->membase))
#define UART_PUT_IEC(p, c) outl(c,UART_IEC((p)->membase))
#define UART_GET_IEC(p) inl(UART_IEC((p)->membase))
#define UART_PUT_CHAR(p, c) outl(c,UART_TD((p)->membase))
#define UART_GET_CHAR(p) inl(UART_RD((p)->membase))
#define UART_GET_RSR(p) inl(UART_RSR((p)->membase))
#define UART_GET_RDS(p) inl(UART_RDS((p)->membase))
#define UART_GET_MSR(p) inl(UART_MSR((p)->membase))
#define UART_GET_MCR(p) inl(UART_MCR((p)->membase))
#define UART_PUT_MCR(p, c) outl(c,UART_MCR((p)->membase))
#define UART_GET_MC(p) inl(UART_MC((p)->membase))
#define UART_PUT_MC(p, c) outl(c,UART_MC((p)->membase))
#define UART_GET_TSR(p) inl(UART_TSR((p)->membase))
#define UART_GET_DIV_HI(p) inl(UART_DIV_HI((p)->membase))
#define UART_PUT_DIV_HI(p,c) outl(c,UART_DIV_HI((p)->membase))
#define UART_GET_DIV_LO(p) inl(UART_DIV_LO((p)->membase))
#define UART_PUT_DIV_LO(p,c) outl(c,UART_DIV_LO((p)->membase))
#define UART_RX_DATA(s) ((s) & UART_RSR_RX_LEVEL_MSK)
#define UART_TX_READY(s) (((s) & UART_TSR_TX_LEVEL_MSK) < 15)
//#define UART_TX_EMPTY(p) ((UART_GET_FR(p) & UART00_UARTFR_TMSK) == 0)
static void uart00_stop_tx(struct uart_port *port)
{
UART_PUT_IEC(port, UART_IEC_TIE_MSK);
}
static void uart00_stop_rx(struct uart_port *port)
{
UART_PUT_IEC(port, UART_IEC_RE_MSK);
}
static void uart00_enable_ms(struct uart_port *port)
{
UART_PUT_IES(port, UART_IES_ME_MSK);
}
static void
uart00_rx_chars(struct uart_port *port, struct pt_regs *regs)
{
struct tty_struct *tty = port->info->tty;
unsigned int status, ch, rds, flg, ignored = 0;
status = UART_GET_RSR(port);
while (UART_RX_DATA(status)) {
/*
* We need to read rds before reading the
* character from the fifo
*/
rds = UART_GET_RDS(port);
ch = UART_GET_CHAR(port);
port->icount.rx++;
if (tty->flip.count >= TTY_FLIPBUF_SIZE)
goto ignore_char;
flg = TTY_NORMAL;
/*
* Note that the error handling code is
* out of the main execution path
*/
if (rds & (UART_RDS_BI_MSK |UART_RDS_FE_MSK|
UART_RDS_PE_MSK |UART_RDS_PE_MSK))
goto handle_error;
if (uart_handle_sysrq_char(port, ch, regs))
goto ignore_char;
error_return:
tty_insert_flip_char(tty, ch, flg);
ignore_char:
status = UART_GET_RSR(port);
}
out:
tty_flip_buffer_push(tty);
return;
handle_error:
if (rds & UART_RDS_BI_MSK) {
status &= ~(UART_RDS_FE_MSK | UART_RDS_PE_MSK);
port->icount.brk++;
if (uart_handle_break(port))
goto ignore_char;
} else if (rds & UART_RDS_PE_MSK)
port->icount.parity++;
else if (rds & UART_RDS_FE_MSK)
port->icount.frame++;
if (rds & UART_RDS_OE_MSK)
port->icount.overrun++;
if (rds & port->ignore_status_mask) {
if (++ignored > 100)
goto out;
goto ignore_char;
}
rds &= port->read_status_mask;
if (rds & UART_RDS_BI_MSK)
flg = TTY_BREAK;
else if (rds & UART_RDS_PE_MSK)
flg = TTY_PARITY;
else if (rds & UART_RDS_FE_MSK)
flg = TTY_FRAME;
if (rds & UART_RDS_OE_MSK) {
/*
* CHECK: does overrun affect the current character?
* ASSUMPTION: it does not.
*/
tty_insert_flip_char(tty, ch, flg);
ch = 0;
flg = TTY_OVERRUN;
}
#ifdef SUPPORT_SYSRQ
port->sysrq = 0;
#endif
goto error_return;
}
static void uart00_tx_chars(struct uart_port *port)
{
struct circ_buf *xmit = &port->info->xmit;
int count;
if (port->x_char) {
while ((UART_GET_TSR(port) & UART_TSR_TX_LEVEL_MSK) == 15)
barrier();
UART_PUT_CHAR(port, port->x_char);
port->icount.tx++;
port->x_char = 0;
return;
}
if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
uart00_stop_tx(port);
return;
}
count = port->fifosize >> 1;
do {
while ((UART_GET_TSR(port) & UART_TSR_TX_LEVEL_MSK) == 15)
barrier();
UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
port->icount.tx++;
if (uart_circ_empty(xmit))
break;
} while (--count > 0);
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(port);
if (uart_circ_empty(xmit))
uart00_stop_tx(port);
}
static void uart00_start_tx(struct uart_port *port)
{
UART_PUT_IES(port, UART_IES_TIE_MSK);
uart00_tx_chars(port);
}
static void uart00_modem_status(struct uart_port *port)
{
unsigned int status;
status = UART_GET_MSR(port);
if (!(status & (UART_MSR_DCTS_MSK | UART_MSR_DDSR_MSK |
UART_MSR_TERI_MSK | UART_MSR_DDCD_MSK)))
return;
if (status & UART_MSR_DDCD_MSK)
uart_handle_dcd_change(port, status & UART_MSR_DCD_MSK);
if (status & UART_MSR_DDSR_MSK)
port->icount.dsr++;
if (status & UART_MSR_DCTS_MSK)
uart_handle_cts_change(port, status & UART_MSR_CTS_MSK);
wake_up_interruptible(&port->info->delta_msr_wait);
}
static irqreturn_t uart00_int(int irq, void *dev_id, struct pt_regs *regs)
{
struct uart_port *port = dev_id;
unsigned int status, pass_counter = 0;
status = UART_GET_INT_STATUS(port);
do {
if (status & UART_ISR_RI_MSK)
uart00_rx_chars(port, regs);
if (status & UART_ISR_MI_MSK)
uart00_modem_status(port);
if (status & (UART_ISR_TI_MSK | UART_ISR_TII_MSK))
uart00_tx_chars(port);
if (pass_counter++ > UART00_ISR_PASS_LIMIT)
break;
status = UART_GET_INT_STATUS(port);
} while (status);
return IRQ_HANDLED;
}
static unsigned int uart00_tx_empty(struct uart_port *port)
{
return UART_GET_TSR(port) & UART_TSR_TX_LEVEL_MSK? 0 : TIOCSER_TEMT;
}
static unsigned int uart00_get_mctrl(struct uart_port *port)
{
unsigned int result = 0;
unsigned int status;
status = UART_GET_MSR(port);
if (status & UART_MSR_DCD_MSK)
result |= TIOCM_CAR;
if (status & UART_MSR_DSR_MSK)
result |= TIOCM_DSR;
if (status & UART_MSR_CTS_MSK)
result |= TIOCM_CTS;
if (status & UART_MSR_RI_MSK)
result |= TIOCM_RI;
return result;
}
static void uart00_set_mctrl_null(struct uart_port *port, unsigned int mctrl)
{
}
static void uart00_break_ctl(struct uart_port *port, int break_state)
{
unsigned long flags;
unsigned int mcr;
spin_lock_irqsave(&port->lock, flags);
mcr = UART_GET_MCR(port);
if (break_state == -1)
mcr |= UART_MCR_BR_MSK;
else
mcr &= ~UART_MCR_BR_MSK;
UART_PUT_MCR(port, mcr);
spin_unlock_irqrestore(&port->lock, flags);
}
static void
uart00_set_termios(struct uart_port *port, struct termios *termios,
struct termios *old)
{
unsigned int uart_mc, old_ies, baud, quot;
unsigned long flags;
/*
* We don't support CREAD (yet)
*/
termios->c_cflag |= CREAD;
/*
* Ask the core to calculate the divisor for us.
*/
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
quot = uart_get_divisor(port, baud);
/* byte size and parity */
switch (termios->c_cflag & CSIZE) {
case CS5:
uart_mc = UART_MC_CLS_CHARLEN_5;
break;
case CS6:
uart_mc = UART_MC_CLS_CHARLEN_6;
break;
case CS7:
uart_mc = UART_MC_CLS_CHARLEN_7;
break;
default: // CS8
uart_mc = UART_MC_CLS_CHARLEN_8;
break;
}
if (termios->c_cflag & CSTOPB)
uart_mc|= UART_MC_ST_TWO;
if (termios->c_cflag & PARENB) {
uart_mc |= UART_MC_PE_MSK;
if (!(termios->c_cflag & PARODD))
uart_mc |= UART_MC_EP_MSK;
}
spin_lock_irqsave(&port->lock, flags);
/*
* Update the per-port timeout.
*/
uart_update_timeout(port, termios->c_cflag, baud);
port->read_status_mask = UART_RDS_OE_MSK;
if (termios->c_iflag & INPCK)
port->read_status_mask |= UART_RDS_FE_MSK | UART_RDS_PE_MSK;
if (termios->c_iflag & (BRKINT | PARMRK))
port->read_status_mask |= UART_RDS_BI_MSK;
/*
* Characters to ignore
*/
port->ignore_status_mask = 0;
if (termios->c_iflag & IGNPAR)
port->ignore_status_mask |= UART_RDS_FE_MSK | UART_RDS_PE_MSK;
if (termios->c_iflag & IGNBRK) {
port->ignore_status_mask |= UART_RDS_BI_MSK;
/*
* If we're ignoring parity and break indicators,
* ignore overruns to (for real raw support).
*/
if (termios->c_iflag & IGNPAR)
port->ignore_status_mask |= UART_RDS_OE_MSK;
}
/* first, disable everything */
old_ies = UART_GET_IES(port);
if (UART_ENABLE_MS(port, termios->c_cflag))
old_ies |= UART_IES_ME_MSK;
/* Set baud rate */
UART_PUT_DIV_LO(port, (quot & 0xff));
UART_PUT_DIV_HI(port, ((quot & 0xf00) >> 8));
UART_PUT_MC(port, uart_mc);
UART_PUT_IES(port, old_ies);
spin_unlock_irqrestore(&port->lock, flags);
}
static int uart00_startup(struct uart_port *port)
{
int result;
/*
* Allocate the IRQ
*/
result = request_irq(port->irq, uart00_int, 0, "uart00", port);
if (result) {
printk(KERN_ERR "Request of irq %d failed\n", port->irq);
return result;
}
/*
* Finally, enable interrupts. Use the TII interrupt to minimise
* the number of interrupts generated. If higher performance is
* needed, consider using the TI interrupt with a suitable FIFO
* threshold
*/
UART_PUT_IES(port, UART_IES_RE_MSK | UART_IES_TIE_MSK);
return 0;
}
static void uart00_shutdown(struct uart_port *port)
{
/*
* disable all interrupts, disable the port
*/
UART_PUT_IEC(port, 0xff);
/* disable break condition and fifos */
UART_PUT_MCR(port, UART_GET_MCR(port) &~UART_MCR_BR_MSK);
/*
* Free the interrupt
*/
free_irq(port->irq, port);
}
static const char *uart00_type(struct uart_port *port)
{
return port->type == PORT_UART00 ? "Altera UART00" : NULL;
}
/*
* Release the memory region(s) being used by 'port'
*/
static void uart00_release_port(struct uart_port *port)
{
release_mem_region(port->mapbase, UART_PORT_SIZE);
#ifdef CONFIG_ARCH_CAMELOT
if (port->membase != (void*)IO_ADDRESS(EXC_UART00_BASE)) {
iounmap(port->membase);
}
#endif
}
/*
* Request the memory region(s) being used by 'port'
*/
static int uart00_request_port(struct uart_port *port)
{
return request_mem_region(port->mapbase, UART_PORT_SIZE, "serial_uart00")
!= NULL ? 0 : -EBUSY;
}
/*
* Configure/autoconfigure the port.
*/
static void uart00_config_port(struct uart_port *port, int flags)
{
/*
* Map the io memory if this is a soft uart
*/
if (!port->membase)
port->membase = ioremap_nocache(port->mapbase,SZ_4K);
if (!port->membase)
printk(KERN_ERR "serial00: cannot map io memory\n");
else
port->type = PORT_UART00;
}
/*
* verify the new serial_struct (for TIOCSSERIAL).
*/
static int uart00_verify_port(struct uart_port *port, struct serial_struct *ser)
{
int ret = 0;
if (ser->type != PORT_UNKNOWN && ser->type != PORT_UART00)
ret = -EINVAL;
if (ser->irq < 0 || ser->irq >= NR_IRQS)
ret = -EINVAL;
if (ser->baud_base < 9600)
ret = -EINVAL;
return ret;
}
static struct uart_ops uart00_pops = {
.tx_empty = uart00_tx_empty,
.set_mctrl = uart00_set_mctrl_null,
.get_mctrl = uart00_get_mctrl,
.stop_tx = uart00_stop_tx,
.start_tx = uart00_start_tx,
.stop_rx = uart00_stop_rx,
.enable_ms = uart00_enable_ms,
.break_ctl = uart00_break_ctl,
.startup = uart00_startup,
.shutdown = uart00_shutdown,
.set_termios = uart00_set_termios,
.type = uart00_type,
.release_port = uart00_release_port,
.request_port = uart00_request_port,
.config_port = uart00_config_port,
.verify_port = uart00_verify_port,
};
#ifdef CONFIG_ARCH_CAMELOT
static struct uart_port epxa10db_port = {
.membase = (void*)IO_ADDRESS(EXC_UART00_BASE),
.mapbase = EXC_UART00_BASE,
.iotype = SERIAL_IO_MEM,
.irq = IRQ_UART,
.uartclk = EXC_AHB2_CLK_FREQUENCY,
.fifosize = 16,
.ops = &uart00_pops,
.flags = ASYNC_BOOT_AUTOCONF,
};
#endif
#ifdef CONFIG_SERIAL_UART00_CONSOLE
static void uart00_console_write(struct console *co, const char *s, unsigned count)
{
#ifdef CONFIG_ARCH_CAMELOT
struct uart_port *port = &epxa10db_port;
unsigned int status, old_ies;
int i;
/*
* First save the CR then disable the interrupts
*/
old_ies = UART_GET_IES(port);
UART_PUT_IEC(port,0xff);
/*
* Now, do each character
*/
for (i = 0; i < count; i++) {
do {
status = UART_GET_TSR(port);
} while (!UART_TX_READY(status));
UART_PUT_CHAR(port, s[i]);
if (s[i] == '\n') {
do {
status = UART_GET_TSR(port);
} while (!UART_TX_READY(status));
UART_PUT_CHAR(port, '\r');
}
}
/*
* Finally, wait for transmitter to become empty
* and restore the IES
*/
do {
status = UART_GET_TSR(port);
} while (status & UART_TSR_TX_LEVEL_MSK);
UART_PUT_IES(port, old_ies);
#endif
}
static void __init
uart00_console_get_options(struct uart_port *port, int *baud,
int *parity, int *bits)
{
unsigned int uart_mc, quot;
uart_mc = UART_GET_MC(port);
*parity = 'n';
if (uart_mc & UART_MC_PE_MSK) {
if (uart_mc & UART_MC_EP_MSK)
*parity = 'e';
else
*parity = 'o';
}
switch (uart_mc & UART_MC_CLS_MSK) {
case UART_MC_CLS_CHARLEN_5:
*bits = 5;
break;
case UART_MC_CLS_CHARLEN_6:
*bits = 6;
break;
case UART_MC_CLS_CHARLEN_7:
*bits = 7;
break;
case UART_MC_CLS_CHARLEN_8:
*bits = 8;
break;
}
quot = UART_GET_DIV_LO(port) | (UART_GET_DIV_HI(port) << 8);
*baud = port->uartclk / (16 *quot );
}
static int __init uart00_console_setup(struct console *co, char *options)
{
struct uart_port *port;
int baud = 115200;
int bits = 8;
int parity = 'n';
int flow = 'n';
#ifdef CONFIG_ARCH_CAMELOT
port = &epxa10db_port; ;
#else
return -ENODEV;
#endif
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
else
uart00_console_get_options(port, &baud, &parity, &bits);
return uart_set_options(port, co, baud, parity, bits, flow);
}
extern struct uart_driver uart00_reg;
static struct console uart00_console = {
.name = SERIAL_UART00_NAME,
.write = uart00_console_write,
.device = uart_console_device,
.setup = uart00_console_setup,
.flags = CON_PRINTBUFFER,
.index = 0,
.data = &uart00_reg,
};
static int __init uart00_console_init(void)
{
register_console(&uart00_console);
return 0;
}
console_initcall(uart00_console_init);
#define UART00_CONSOLE &uart00_console
#else
#define UART00_CONSOLE NULL
#endif
static struct uart_driver uart00_reg = {
.owner = NULL,
.driver_name = SERIAL_UART00_NAME,
.dev_name = SERIAL_UART00_NAME,
.major = SERIAL_UART00_MAJOR,
.minor = SERIAL_UART00_MINOR,
.nr = UART_NR,
.cons = UART00_CONSOLE,
};
struct dev_port_entry{
unsigned int base_addr;
struct uart_port *port;
};
#ifdef CONFIG_PLD_HOTSWAP
static struct dev_port_entry dev_port_map[UART_NR];
/*
* Keep a mapping of dev_info addresses -> port lines to use when
* removing ports dev==NULL indicates unused entry
*/
struct uart00_ps_data{
unsigned int clk;
unsigned int fifosize;
};
int uart00_add_device(struct pldhs_dev_info* dev_info, void* dev_ps_data)
{
struct uart00_ps_data* dev_ps=dev_ps_data;
struct uart_port * port;
int i,result;
i=0;
while(dev_port_map[i].port)
i++;
if(i==UART_NR){
printk(KERN_WARNING "uart00: Maximum number of ports reached\n");
return 0;
}
port=kmalloc(sizeof(struct uart_port),GFP_KERNEL);
if(!port)
return -ENOMEM;
printk("clk=%d fifo=%d\n",dev_ps->clk,dev_ps->fifosize);
port->membase=0;
port->mapbase=dev_info->base_addr;
port->iotype=SERIAL_IO_MEM;
port->irq=dev_info->irq;
port->uartclk=dev_ps->clk;
port->fifosize=dev_ps->fifosize;
port->ops=&uart00_pops;
port->line=i;
port->flags=ASYNC_BOOT_AUTOCONF;
result=uart_add_one_port(&uart00_reg, port);
if(result){
printk("uart_add_one_port returned %d\n",result);
return result;
}
dev_port_map[i].base_addr=dev_info->base_addr;
dev_port_map[i].port=port;
printk("uart00: added device at %x as ttyUA%d\n",dev_port_map[i].base_addr,i);
return 0;
}
int uart00_remove_devices(void)
{
int i,result;
result=0;
for(i=1;i<UART_NR;i++){
if(dev_port_map[i].base_addr){
result=uart_remove_one_port(&uart00_reg, dev_port_map[i].port);
if(result)
return result;
/* port removed sucessfully, so now tidy up */
kfree(dev_port_map[i].port);
dev_port_map[i].base_addr=0;
dev_port_map[i].port=NULL;
}
}
return 0;
}
struct pld_hotswap_ops uart00_pldhs_ops={
.name = "uart00",
.add_device = uart00_add_device,
.remove_devices = uart00_remove_devices,
};
#endif
static int __init uart00_init(void)
{
int result;
printk(KERN_INFO "Serial: UART00 driver $Revision: 1.35 $\n");
printk(KERN_WARNING "serial_uart00:Using temporary major/minor pairs"
" - these WILL change in the future\n");
result = uart_register_driver(&uart00_reg);
if (result)
return result;
#ifdef CONFIG_ARCH_CAMELOT
result = uart_add_one_port(&uart00_reg,&epxa10db_port);
#endif
if (result)
uart_unregister_driver(&uart00_reg);
#ifdef CONFIG_PLD_HOTSWAP
pldhs_register_driver(&uart00_pldhs_ops);
#endif
return result;
}
__initcall(uart00_init);
drivers/video/cyber2000fb.c
View file @ 3995f4c5
......@@ -50,7 +50,6 @@
#include <linux/init.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/pgtable.h>
#include <asm/system.h>
#include <asm/uaccess.h>
......
drivers/video/sa1100fb.c
View file @ 3995f4c5
......@@ -178,7 +178,6 @@
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/uaccess.h>
#include <asm/arch/assabet.h>
......@@ -1455,7 +1454,11 @@ static struct sa1100fb_info * __init sa1100fb_init_fbinfo(struct device *dev)
static int __init sa1100fb_probe(struct platform_device *pdev)
{
struct sa1100fb_info *fbi;
int ret;
int ret, irq;
irq = platform_get_irq(pdev, 0);
if (irq <= 0)
return -EINVAL;
if (!request_mem_region(0xb0100000, 0x10000, "LCD"))
return -EBUSY;
......@@ -1470,7 +1473,7 @@ static int __init sa1100fb_probe(struct platform_device *pdev)
if (ret)
goto failed;
ret = request_irq(IRQ_LCD, sa1100fb_handle_irq, SA_INTERRUPT,
ret = request_irq(irq, sa1100fb_handle_irq, SA_INTERRUPT,
"LCD", fbi);
if (ret) {
printk(KERN_ERR "sa1100fb: request_irq failed: %d\n", ret);
......@@ -1492,7 +1495,7 @@ static int __init sa1100fb_probe(struct platform_device *pdev)
ret = register_framebuffer(&fbi->fb);
if (ret < 0)
goto failed;
goto err_free_irq;
#ifdef CONFIG_CPU_FREQ
fbi->freq_transition.notifier_call = sa1100fb_freq_transition;
......@@ -1504,7 +1507,9 @@ static int __init sa1100fb_probe(struct platform_device *pdev)
/* This driver cannot be unloaded at the moment */
return 0;
failed:
err_free_irq:
free_irq(irq, fbi);
failed:
platform_set_drvdata(pdev, NULL);
kfree(fbi);
release_mem_region(0xb0100000, 0x10000);
......
fs/partitions/Kconfig
View file @ 3995f4c5
......@@ -21,26 +21,30 @@ config ACORN_PARTITION
Support hard disks partitioned under Acorn operating systems.
config ACORN_PARTITION_CUMANA
bool "Cumana partition support" if PARTITION_ADVANCED && ACORN_PARTITION
bool "Cumana partition support" if PARTITION_ADVANCED
default y if ARCH_ACORN
depends on ACORN_PARTITION
help
Say Y here if you would like to use hard disks under Linux which
were partitioned using the Cumana interface on Acorn machines.
config ACORN_PARTITION_EESOX
bool "EESOX partition support" if PARTITION_ADVANCED && ACORN_PARTITION
bool "EESOX partition support" if PARTITION_ADVANCED
default y if ARCH_ACORN
depends on ACORN_PARTITION
config ACORN_PARTITION_ICS
bool "ICS partition support" if PARTITION_ADVANCED && ACORN_PARTITION
bool "ICS partition support" if PARTITION_ADVANCED
default y if ARCH_ACORN
depends on ACORN_PARTITION
help
Say Y here if you would like to use hard disks under Linux which
were partitioned using the ICS interface on Acorn machines.
config ACORN_PARTITION_ADFS
bool "Native filecore partition support" if PARTITION_ADVANCED && ACORN_PARTITION
bool "Native filecore partition support" if PARTITION_ADVANCED
default y if ARCH_ACORN
depends on ACORN_PARTITION
help
The Acorn Disc Filing System is the standard file system of the
RiscOS operating system which runs on Acorn's ARM-based Risc PC
......@@ -48,15 +52,17 @@ config ACORN_PARTITION_ADFS
`Y' here, Linux will support disk partitions created under ADFS.
config ACORN_PARTITION_POWERTEC
bool "PowerTec partition support" if PARTITION_ADVANCED && ACORN_PARTITION
bool "PowerTec partition support" if PARTITION_ADVANCED
default y if ARCH_ACORN
depends on ACORN_PARTITION
help
Support reading partition tables created on Acorn machines using
the PowerTec SCSI drive.
config ACORN_PARTITION_RISCIX
bool "RISCiX partition support" if PARTITION_ADVANCED && ACORN_PARTITION
bool "RISCiX partition support" if PARTITION_ADVANCED
default y if ARCH_ACORN
depends on ACORN_PARTITION
help
Once upon a time, there was a native Unix port for the Acorn series
of machines called RISCiX. If you say 'Y' here, Linux will be able
......@@ -224,5 +230,3 @@ config EFI_PARTITION
Say Y here if you would like to use hard disks under Linux which
were partitioned using EFI GPT. Presently only useful on the
IA-64 platform.
# define_bool CONFIG_ACORN_PARTITION_CUMANA y
include/asm-arm/arch-at91rm9200/at91rm9200.h 0 → 100644
View file @ 3995f4c5
/*
* include/asm-arm/arch-at91rm9200/at91rm9200.h
*
* Copyright (C) 2005 Ivan Kokshaysky
* Copyright (C) SAN People
*
* Common definitions.
* Based on AT91RM9200 datasheet revision E.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef AT91RM9200_H
#define AT91RM9200_H
/*
* Peripheral identifiers/interrupts.
*/
#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */
#define AT91_ID_SYS 1 /* System Peripheral */
#define AT91_ID_PIOA 2 /* Parallel IO Controller A */
#define AT91_ID_PIOB 3 /* Parallel IO Controller B */
#define AT91_ID_PIOC 4 /* Parallel IO Controller C */
#define AT91_ID_PIOD 5 /* Parallel IO Controller D */
#define AT91_ID_US0 6 /* USART 0 */
#define AT91_ID_US1 7 /* USART 1 */
#define AT91_ID_US2 8 /* USART 2 */
#define AT91_ID_US3 9 /* USART 3 */
#define AT91_ID_MCI 10 /* Multimedia Card Interface */
#define AT91_ID_UDP 11 /* USB Device Port */
#define AT91_ID_TWI 12 /* Two-Wire Interface */
#define AT91_ID_SPI 13 /* Serial Peripheral Interface */
#define AT91_ID_SSC0 14 /* Serial Synchronous Controller 0 */
#define AT91_ID_SSC1 15 /* Serial Synchronous Controller 1 */
#define AT91_ID_SSC2 16 /* Serial Synchronous Controller 2 */
#define AT91_ID_TC0 17 /* Timer Counter 0 */
#define AT91_ID_TC1 18 /* Timer Counter 1 */
#define AT91_ID_TC2 19 /* Timer Counter 2 */
#define AT91_ID_TC3 20 /* Timer Counter 3 */
#define AT91_ID_TC4 21 /* Timer Counter 4 */
#define AT91_ID_TC5 22 /* Timer Counter 5 */
#define AT91_ID_UHP 23 /* USB Host port */
#define AT91_ID_EMAC 24 /* Ethernet MAC */
#define AT91_ID_IRQ0 25 /* Advanced Interrupt Controller (IRQ0) */
#define AT91_ID_IRQ1 26 /* Advanced Interrupt Controller (IRQ1) */
#define AT91_ID_IRQ2 27 /* Advanced Interrupt Controller (IRQ2) */
#define AT91_ID_IRQ3 28 /* Advanced Interrupt Controller (IRQ3) */
#define AT91_ID_IRQ4 29 /* Advanced Interrupt Controller (IRQ4) */
#define AT91_ID_IRQ5 30 /* Advanced Interrupt Controller (IRQ5) */
#define AT91_ID_IRQ6 31 /* Advanced Interrupt Controller (IRQ6) */
/*
* Peripheral physical base addresses.
*/
#define AT91_BASE_TCB0 0xfffa0000
#define AT91_BASE_TC0 0xfffa0000
#define AT91_BASE_TC1 0xfffa0040
#define AT91_BASE_TC2 0xfffa0080
#define AT91_BASE_TCB1 0xfffa4000
#define AT91_BASE_TC3 0xfffa4000
#define AT91_BASE_TC4 0xfffa4040
#define AT91_BASE_TC5 0xfffa4080
#define AT91_BASE_UDP 0xfffb0000
#define AT91_BASE_MCI 0xfffb4000
#define AT91_BASE_TWI 0xfffb8000
#define AT91_BASE_EMAC 0xfffbc000
#define AT91_BASE_US0 0xfffc0000
#define AT91_BASE_US1 0xfffc4000
#define AT91_BASE_US2 0xfffc8000
#define AT91_BASE_US3 0xfffcc000
#define AT91_BASE_SSC0 0xfffd0000
#define AT91_BASE_SSC1 0xfffd4000
#define AT91_BASE_SSC2 0xfffd8000
#define AT91_BASE_SPI 0xfffe0000
#define AT91_BASE_SYS 0xfffff000
/*
* PIO pin definitions (peripheral A/B multiplexing).
*/
#define AT91_PA0_MISO (1 << 0) /* A: SPI Master-In Slave-Out */
#define AT91_PA0_PCK3 (1 << 0) /* B: PMC Programmable Clock Output 3 */
#define AT91_PA1_MOSI (1 << 1) /* A: SPI Master-Out Slave-In */
#define AT91_PA1_PCK0 (1 << 1) /* B: PMC Programmable Clock Output 0 */
#define AT91_PA2_SPCK (1 << 2) /* A: SPI Serial Clock */
#define AT91_PA2_IRQ4 (1 << 2) /* B: External Interrupt 4 */
#define AT91_PA3_NPCS0 (1 << 3) /* A: SPI Peripheral Chip Select 0 */
#define AT91_PA3_IRQ5 (1 << 3) /* B: External Interrupt 5 */
#define AT91_PA4_NPCS1 (1 << 4) /* A: SPI Peripheral Chip Select 1 */
#define AT91_PA4_PCK1 (1 << 4) /* B: PMC Programmable Clock Output 1 */
#define AT91_PA5_NPCS2 (1 << 5) /* A: SPI Peripheral Chip Select 2 */
#define AT91_PA5_TXD3 (1 << 5) /* B: USART Transmit Data 3 */
#define AT91_PA6_NPCS3 (1 << 6) /* A: SPI Peripheral Chip Select 3 */
#define AT91_PA6_RXD3 (1 << 6) /* B: USART Receive Data 3 */
#define AT91_PA7_ETXCK_EREFCK (1 << 7) /* A: Ethernet Reference Clock / Transmit Clock */
#define AT91_PA7_PCK2 (1 << 7) /* B: PMC Programmable Clock Output 2 */
#define AT91_PA8_ETXEN (1 << 8) /* A: Ethernet Transmit Enable */
#define AT91_PA8_MCCDB (1 << 8) /* B: MMC Multimedia Card B Command */
#define AT91_PA9_ETX0 (1 << 9) /* A: Ethernet Transmit Data 0 */
#define AT91_PA9_MCDB0 (1 << 9) /* B: MMC Multimedia Card B Data 0 */
#define AT91_PA10_ETX1 (1 << 10) /* A: Ethernet Transmit Data 1 */
#define AT91_PA10_MCDB1 (1 << 10) /* B: MMC Multimedia Card B Data 1 */
#define AT91_PA11_ECRS_ECRSDV (1 << 11) /* A: Ethernet Carrier Sense / Data Valid */
#define AT91_PA11_MCDB2 (1 << 11) /* B: MMC Multimedia Card B Data 2 */
#define AT91_PA12_ERX0 (1 << 12) /* A: Ethernet Receive Data 0 */
#define AT91_PA12_MCDB3 (1 << 12) /* B: MMC Multimedia Card B Data 3 */
#define AT91_PA13_ERX1 (1 << 13) /* A: Ethernet Receive Data 1 */
#define AT91_PA13_TCLK0 (1 << 13) /* B: TC External Clock Input 0 */
#define AT91_PA14_ERXER (1 << 14) /* A: Ethernet Receive Error */
#define AT91_PA14_TCLK1 (1 << 14) /* B: TC External Clock Input 1 */
#define AT91_PA15_EMDC (1 << 15) /* A: Ethernet Management Data Clock */
#define AT91_PA15_TCLK2 (1 << 15) /* B: TC External Clock Input 2 */
#define AT91_PA16_EMDIO (1 << 16) /* A: Ethernet Management Data I/O */
#define AT91_PA16_IRQ6 (1 << 16) /* B: External Interrupt 6 */
#define AT91_PA17_TXD0 (1 << 17) /* A: USART Transmit Data 0 */
#define AT91_PA17_TIOA0 (1 << 17) /* B: TC I/O Line A 0 */
#define AT91_PA18_RXD0 (1 << 18) /* A: USART Receive Data 0 */
#define AT91_PA18_TIOB0 (1 << 18) /* B: TC I/O Line B 0 */
#define AT91_PA19_SCK0 (1 << 19) /* A: USART Serial Clock 0 */
#define AT91_PA19_TIOA1 (1 << 19) /* B: TC I/O Line A 1 */
#define AT91_PA20_CTS0 (1 << 20) /* A: USART Clear To Send 0 */
#define AT91_PA20_TIOB1 (1 << 20) /* B: TC I/O Line B 1 */
#define AT91_PA21_RTS0 (1 << 21) /* A: USART Ready To Send 0 */
#define AT91_PA21_TIOA2 (1 << 21) /* B: TC I/O Line A 2 */
#define AT91_PA22_RXD2 (1 << 22) /* A: USART Receive Data 2 */
#define AT91_PA22_TIOB2 (1 << 22) /* B: TC I/O Line B 2 */
#define AT91_PA23_TXD2 (1 << 23) /* A: USART Transmit Data 2 */
#define AT91_PA23_IRQ3 (1 << 23) /* B: External Interrupt 3 */
#define AT91_PA24_SCK2 (1 << 24) /* A: USART Serial Clock 2 */
#define AT91_PA24_PCK1 (1 << 24) /* B: PMC Programmable Clock Output 1 */
#define AT91_PA25_TWD (1 << 25) /* A: TWI Two-wire Serial Data */
#define AT91_PA25_IRQ2 (1 << 25) /* B: External Interrupt 2 */
#define AT91_PA26_TWCK (1 << 26) /* A: TWI Two-wire Serial Clock */
#define AT91_PA26_IRQ1 (1 << 26) /* B: External Interrupt 1 */
#define AT91_PA27_MCCK (1 << 27) /* A: MMC Multimedia Card Clock */
#define AT91_PA27_TCLK3 (1 << 27) /* B: TC External Clock Input 3 */
#define AT91_PA28_MCCDA (1 << 28) /* A: MMC Multimedia Card A Command */
#define AT91_PA28_TCLK4 (1 << 28) /* B: TC External Clock Input 4 */
#define AT91_PA29_MCDA0 (1 << 29) /* A: MMC Multimedia Card A Data 0 */
#define AT91_PA29_TCLK5 (1 << 29) /* B: TC External Clock Input 5 */
#define AT91_PA30_DRXD (1 << 30) /* A: DBGU Receive Data */
#define AT91_PA30_CTS2 (1 << 30) /* B: USART Clear To Send 2 */
#define AT91_PA31_DTXD (1 << 31) /* A: DBGU Transmit Data */
#define AT91_PA31_RTS2 (1 << 31) /* B: USART Ready To Send 2 */
#define AT91_PB0_TF0 (1 << 0) /* A: SSC Transmit Frame Sync 0 */
#define AT91_PB0_RTS3 (1 << 0) /* B: USART Ready To Send 3 */
#define AT91_PB1_TK0 (1 << 1) /* A: SSC Transmit Clock 0 */
#define AT91_PB1_CTS3 (1 << 1) /* B: USART Clear To Send 3 */
#define AT91_PB2_TD0 (1 << 2) /* A: SSC Transmit Data 0 */
#define AT91_PB2_SCK3 (1 << 2) /* B: USART Serial Clock 3 */
#define AT91_PB3_RD0 (1 << 3) /* A: SSC Receive Data 0 */
#define AT91_PB3_MCDA1 (1 << 3) /* B: MMC Multimedia Card A Data 1 */
#define AT91_PB4_RK0 (1 << 4) /* A: SSC Receive Clock 0 */
#define AT91_PB4_MCDA2 (1 << 4) /* B: MMC Multimedia Card A Data 2 */
#define AT91_PB5_RF0 (1 << 5) /* A: SSC Receive Frame Sync 0 */
#define AT91_PB5_MCDA3 (1 << 5) /* B: MMC Multimedia Card A Data 3 */
#define AT91_PB6_TF1 (1 << 6) /* A: SSC Transmit Frame Sync 1 */
#define AT91_PB6_TIOA3 (1 << 6) /* B: TC I/O Line A 3 */
#define AT91_PB7_TK1 (1 << 7) /* A: SSC Transmit Clock 1 */
#define AT91_PB7_TIOB3 (1 << 7) /* B: TC I/O Line B 3 */
#define AT91_PB8_TD1 (1 << 8) /* A: SSC Transmit Data 1 */
#define AT91_PB8_TIOA4 (1 << 8) /* B: TC I/O Line A 4 */
#define AT91_PB9_RD1 (1 << 9) /* A: SSC Receive Data 1 */
#define AT91_PB9_TIOB4 (1 << 9) /* B: TC I/O Line B 4 */
#define AT91_PB10_RK1 (1 << 10) /* A: SSC Receive Clock 1 */
#define AT91_PB10_TIOA5 (1 << 10) /* B: TC I/O Line A 5 */
#define AT91_PB11_RF1 (1 << 11) /* A: SSC Receive Frame Sync 1 */
#define AT91_PB11_TIOB5 (1 << 11) /* B: TC I/O Line B 5 */
#define AT91_PB12_TF2 (1 << 12) /* A: SSC Transmit Frame Sync 2 */
#define AT91_PB12_ETX2 (1 << 12) /* B: Ethernet Transmit Data 2 */
#define AT91_PB13_TK2 (1 << 13) /* A: SSC Transmit Clock 3 */
#define AT91_PB13_ETX3 (1 << 13) /* B: Ethernet Transmit Data 3 */
#define AT91_PB14_TD2 (1 << 14) /* A: SSC Transmit Data 2 */
#define AT91_PB14_ETXER (1 << 14) /* B: Ethernet Transmit Coding Error */
#define AT91_PB15_RD2 (1 << 15) /* A: SSC Receive Data 2 */
#define AT91_PB15_ERX2 (1 << 15) /* B: Ethernet Receive Data 2 */
#define AT91_PB16_RK2 (1 << 16) /* A: SSC Receive Clock 2 */
#define AT91_PB16_ERX3 (1 << 16) /* B: Ethernet Receive Data 3 */
#define AT91_PB17_RF2 (1 << 17) /* A: SSC Receive Frame Sync 2 */
#define AT91_PB17_ERXDV (1 << 17) /* B: Ethernet Receive Data Valid */
#define AT91_PB18_RI1 (1 << 18) /* A: USART Ring Indicator 1 */
#define AT91_PB18_ECOL (1 << 18) /* B: Ethernet Collision Detected */
#define AT91_PB19_DTR1 (1 << 19) /* A: USART Data Terminal Ready 1 */
#define AT91_PB19_ERXCK (1 << 19) /* B: Ethernet Receive Clock */
#define AT91_PB20_TXD1 (1 << 20) /* A: USART Transmit Data 1 */
#define AT91_PB21_RXD1 (1 << 21) /* A: USART Receive Data 1 */
#define AT91_PB22_SCK1 (1 << 22) /* A: USART Serial Clock 1 */
#define AT91_PB23_DCD1 (1 << 23) /* A: USART Data Carrier Detect 1 */
#define AT91_PB24_CTS1 (1 << 24) /* A: USART Clear To Send 1 */
#define AT91_PB25_DSR1 (1 << 25) /* A: USART Data Set Ready 1 */
#define AT91_PB25_EF100 (1 << 25) /* B: Ethernet Force 100 Mbit */
#define AT91_PB26_RTS1 (1 << 26) /* A: USART Ready To Send 1 */
#define AT91_PB27_PCK0 (1 << 27) /* B: PMC Programmable Clock Output 0 */
#define AT91_PB28_FIQ (1 << 28) /* A: Fast Interrupt */
#define AT91_PB29_IRQ0 (1 << 29) /* A: External Interrupt 0 */
#define AT91_PC0_BFCK (1 << 0) /* A: Burst Flash Clock */
#define AT91_PC1_BFRDY_SMOE (1 << 1) /* A: Burst Flash Ready / SmartMedia Output Enable */
#define AT91_PC2_BFAVD (1 << 2) /* A: Burst Flash Address Valid */
#define AT91_PC3_BFBAA_SMWE (1 << 3) /* A: Burst Flash Address Advance / SmartMedia Write Enable */
#define AT91_PC4_BFOE (1 << 4) /* A: Burst Flash Output Enable */
#define AT91_PC5_BFWE (1 << 5) /* A: Burst Flash Write Enable */
#define AT91_PC6_NWAIT (1 << 6) /* A: SMC Wait Signal */
#define AT91_PC7_A23 (1 << 7) /* A: Address Bus 23 */
#define AT91_PC8_A24 (1 << 8) /* A: Address Bus 24 */
#define AT91_PC9_A25_CFRNW (1 << 9) /* A: Address Bus 25 / Compact Flash Read Not Write */
#define AT91_PC10_NCS4_CFCS (1 << 10) /* A: SMC Chip Select 4 / Compact Flash Chip Select */
#define AT91_PC11_NCS5_CFCE1 (1 << 11) /* A: SMC Chip Select 5 / Compact Flash Chip Enable 1 */
#define AT91_PC12_NCS6_CFCE2 (1 << 12) /* A: SMC Chip Select 6 / Compact Flash Chip Enable 2 */
#define AT91_PC13_NCS7 (1 << 13) /* A: Chip Select 7 */
#define AT91_PD0_ETX0 (1 << 0) /* A: Ethernet Transmit Data 0 */
#define AT91_PD1_ETX1 (1 << 1) /* A: Ethernet Transmit Data 1 */
#define AT91_PD2_ETX2 (1 << 2) /* A: Ethernet Transmit Data 2 */
#define AT91_PD3_ETX3 (1 << 3) /* A: Ethernet Transmit Data 3 */
#define AT91_PD4_ETXEN (1 << 4) /* A: Ethernet Transmit Enable */
#define AT91_PD5_ETXER (1 << 5) /* A: Ethernet Transmit Coding Error */
#define AT91_PD6_DTXD (1 << 6) /* A: DBGU Transmit Data */
#define AT91_PD7_PCK0 (1 << 7) /* A: PMC Programmable Clock Output 0 */
#define AT91_PD7_TSYNC (1 << 7) /* B: ETM Trace Synchronization Signal */
#define AT91_PD8_PCK1 (1 << 8) /* A: PMC Programmable Clock Output 1 */
#define AT91_PD8_TCLK (1 << 8) /* B: ETM Trace Clock */
#define AT91_PD9_PCK2 (1 << 9) /* A: PMC Programmable Clock Output 2 */
#define AT91_PD9_TPS0 (1 << 9) /* B: ETM Trace ARM Pipeline Status 0 */
#define AT91_PD10_PCK3 (1 << 10) /* A: PMC Programmable Clock Output 3 */
#define AT91_PD10_TPS1 (1 << 10) /* B: ETM Trace ARM Pipeline Status 1 */
#define AT91_PD11_TPS2 (1 << 11) /* B: ETM Trace ARM Pipeline Status 2 */
#define AT91_PD12_TPK0 (1 << 12) /* B: ETM Trace Packet Port 0 */
#define AT91_PD13_TPK1 (1 << 13) /* B: ETM Trace Packet Port 1 */
#define AT91_PD14_TPK2 (1 << 14) /* B: ETM Trace Packet Port 2 */
#define AT91_PD15_TD0 (1 << 15) /* A: SSC Transmit Data 0 */
#define AT91_PD15_TPK3 (1 << 15) /* B: ETM Trace Packet Port 3 */
#define AT91_PD16_TD1 (1 << 16) /* A: SSC Transmit Data 1 */
#define AT91_PD16_TPK4 (1 << 16) /* B: ETM Trace Packet Port 4 */
#define AT91_PD17_TD2 (1 << 17) /* A: SSC Transmit Data 2 */
#define AT91_PD17_TPK5 (1 << 17) /* B: ETM Trace Packet Port 5 */
#define AT91_PD18_NPCS1 (1 << 18) /* A: SPI Peripheral Chip Select 1 */
#define AT91_PD18_TPK6 (1 << 18) /* B: ETM Trace Packet Port 6 */
#define AT91_PD19_NPCS2 (1 << 19) /* A: SPI Peripheral Chip Select 2 */
#define AT91_PD19_TPK7 (1 << 19) /* B: ETM Trace Packet Port 7 */
#define AT91_PD20_NPCS3 (1 << 20) /* A: SPI Peripheral Chip Select 3 */
#define AT91_PD20_TPK8 (1 << 20) /* B: ETM Trace Packet Port 8 */
#define AT91_PD21_RTS0 (1 << 21) /* A: USART Ready To Send 0 */
#define AT91_PD21_TPK9 (1 << 21) /* B: ETM Trace Packet Port 9 */
#define AT91_PD22_RTS1 (1 << 22) /* A: USART Ready To Send 1 */
#define AT91_PD22_TPK10 (1 << 22) /* B: ETM Trace Packet Port 10 */
#define AT91_PD23_RTS2 (1 << 23) /* A: USART Ready To Send 2 */
#define AT91_PD23_TPK11 (1 << 23) /* B: ETM Trace Packet Port 11 */
#define AT91_PD24_RTS3 (1 << 24) /* A: USART Ready To Send 3 */
#define AT91_PD24_TPK12 (1 << 24) /* B: ETM Trace Packet Port 12 */
#define AT91_PD25_DTR1 (1 << 25) /* A: USART Data Terminal Ready 1 */
#define AT91_PD25_TPK13 (1 << 25) /* B: ETM Trace Packet Port 13 */
#define AT91_PD26_TPK14 (1 << 26) /* B: ETM Trace Packet Port 14 */
#define AT91_PD27_TPK15 (1 << 27) /* B: ETM Trace Packet Port 15 */
#endif
include/asm-arm/arch-at91rm9200/at91rm9200_sys.h 0 → 100644
View file @ 3995f4c5
/*
* include/asm-arm/arch-at91rm9200/at91rm9200_sys.h
*
* Copyright (C) 2005 Ivan Kokshaysky
* Copyright (C) SAN People
*
* System peripherals registers.
* Based on AT91RM9200 datasheet revision E.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef AT91RM9200_SYS_H
#define AT91RM9200_SYS_H
/*
* Advanced Interrupt Controller.
*/
#define AT91_AIC 0x000
#define AT91_AIC_SMR(n) (AT91_AIC + ((n) * 4)) /* Source Mode Registers 0-31 */
#define AT91_AIC_PRIOR (7 << 0) /* Priority Level */
#define AT91_AIC_SRCTYPE (3 << 5) /* Interrupt Source Type */
#define AT91_AIC_SRCTYPE_LOW (0 << 5)
#define AT91_AIC_SRCTYPE_FALLING (1 << 5)
#define AT91_AIC_SRCTYPE_HIGH (2 << 5)
#define AT91_AIC_SRCTYPE_RISING (3 << 5)
#define AT91_AIC_SVR(n) (AT91_AIC + 0x80 + ((n) * 4)) /* Source Vector Registers 0-31 */
#define AT91_AIC_IVR (AT91_AIC + 0x100) /* Interrupt Vector Register */
#define AT91_AIC_FVR (AT91_AIC + 0x104) /* Fast Interrupt Vector Register */
#define AT91_AIC_ISR (AT91_AIC + 0x108) /* Interrupt Status Register */
#define AT91_AIC_IRQID (0x1f << 0) /* Current Interrupt Identifier */
#define AT91_AIC_IPR (AT91_AIC + 0x10c) /* Interrupt Pending Register */
#define AT91_AIC_IMR (AT91_AIC + 0x110) /* Interrupt Mask Register */
#define AT91_AIC_CISR (AT91_AIC + 0x114) /* Core Interrupt Status Register */
#define AT91_AIC_NFIQ (1 << 0) /* nFIQ Status */
#define AT91_AIC_NIRQ (1 << 1) /* nIRQ Status */
#define AT91_AIC_IECR (AT91_AIC + 0x120) /* Interrupt Enable Command Register */
#define AT91_AIC_IDCR (AT91_AIC + 0x124) /* Interrupt Disable Command Register */
#define AT91_AIC_ICCR (AT91_AIC + 0x128) /* Interrupt Clear Command Register */
#define AT91_AIC_ISCR (AT91_AIC + 0x12c) /* Interrupt Set Command Register */
#define AT91_AIC_EOICR (AT91_AIC + 0x130) /* End of Interrupt Command Register */
#define AT91_AIC_SPU (AT91_AIC + 0x134) /* Spurious Interrupt Vector Register */
#define AT91_AIC_DCR (AT91_AIC + 0x138) /* Debug Control Register */
#define AT91_AIC_DCR_PROT (1 << 0) /* Protection Mode */
#define AT91_AIC_DCR_GMSK (1 << 1) /* General Mask */
/*
* Debug Unit.
*/
#define AT91_DBGU 0x200
#define AT91_DBGU_CR (AT91_DBGU + 0x00) /* Control Register */
#define AT91_DBGU_MR (AT91_DBGU + 0x04) /* Mode Register */
#define AT91_DBGU_IER (AT91_DBGU + 0x08) /* Interrupt Enable Register */
#define AT91_DBGU_TXRDY (1 << 1) /* Transmitter Ready */
#define AT91_DBGU_TXEMPTY (1 << 9) /* Transmitter Empty */
#define AT91_DBGU_IDR (AT91_DBGU + 0x0c) /* Interrupt Disable Register */
#define AT91_DBGU_IMR (AT91_DBGU + 0x10) /* Interrupt Mask Register */
#define AT91_DBGU_SR (AT91_DBGU + 0x14) /* Status Register */
#define AT91_DBGU_RHR (AT91_DBGU + 0x18) /* Receiver Holding Register */
#define AT91_DBGU_THR (AT91_DBGU + 0x1c) /* Transmitter Holding Register */
#define AT91_DBGU_BRGR (AT91_DBGU + 0x20) /* Baud Rate Generator Register */
#define AT91_DBGU_CIDR (AT91_DBGU + 0x40) /* Chip ID Register */
#define AT91_DBGU_EXID (AT91_DBGU + 0x44) /* Chip ID Extension Register */
/*
* PIO Controllers.
*/
#define AT91_PIOA 0x400
#define AT91_PIOB 0x600
#define AT91_PIOC 0x800
#define AT91_PIOD 0xa00
#define PIO_PER 0x00 /* Enable Register */
#define PIO_PDR 0x04 /* Disable Register */
#define PIO_PSR 0x08 /* Status Register */
#define PIO_OER 0x10 /* Output Enable Register */
#define PIO_ODR 0x14 /* Output Disable Register */
#define PIO_OSR 0x18 /* Output Status Register */
#define PIO_IFER 0x20 /* Glitch Input Filter Enable */
#define PIO_IFDR 0x24 /* Glitch Input Filter Disable */
#define PIO_IFSR 0x28 /* Glitch Input Filter Status */
#define PIO_SODR 0x30 /* Set Output Data Register */
#define PIO_CODR 0x34 /* Clear Output Data Register */
#define PIO_ODSR 0x38 /* Output Data Status Register */
#define PIO_PDSR 0x3c /* Pin Data Status Register */
#define PIO_IER 0x40 /* Interrupt Enable Register */
#define PIO_IDR 0x44 /* Interrupt Disable Register */
#define PIO_IMR 0x48 /* Interrupt Mask Register */
#define PIO_ISR 0x4c /* Interrupt Status Register */
#define PIO_MDER 0x50 /* Multi-driver Enable Register */
#define PIO_MDDR 0x54 /* Multi-driver Disable Register */
#define PIO_MDSR 0x58 /* Multi-driver Status Register */
#define PIO_PUDR 0x60 /* Pull-up Disable Register */
#define PIO_PUER 0x64 /* Pull-up Enable Register */
#define PIO_PUSR 0x68 /* Pull-up Status Register */
#define PIO_ASR 0x70 /* Peripheral A Select Register */
#define PIO_BSR 0x74 /* Peripheral B Select Register */
#define PIO_ABSR 0x78 /* AB Status Register */
#define PIO_OWER 0xa0 /* Output Write Enable Register */
#define PIO_OWDR 0xa4 /* Output Write Disable Register */
#define PIO_OWSR 0xa8 /* Output Write Status Register */
#define AT91_PIO_P(n) (1 << (n))
/*
* Power Management Controller.
*/
#define AT91_PMC 0xc00
#define AT91_PMC_SCER (AT91_PMC + 0x00) /* System Clock Enable Register */
#define AT91_PMC_SCDR (AT91_PMC + 0x04) /* System Clock Disable Register */
#define AT91_PMC_SCSR (AT91_PMC + 0x08) /* System Clock Status Register */
#define AT91_PMC_PCK (1 << 0) /* Processor Clock */
#define AT91_PMC_UDP (1 << 1) /* USB Devcice Port Clock */
#define AT91_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend */
#define AT91_PMC_UHP (1 << 4) /* USB Host Port Clock */
#define AT91_PMC_PCK0 (1 << 8) /* Programmable Clock 0 */
#define AT91_PMC_PCK1 (1 << 9) /* Programmable Clock 1 */
#define AT91_PMC_PCK2 (1 << 10) /* Programmable Clock 2 */
#define AT91_PMC_PCK3 (1 << 11) /* Programmable Clock 3 */
#define AT91_PMC_PCER (AT91_PMC + 0x10) /* Peripheral Clock Enable Register */
#define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */
#define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */
#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register */
#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */
#define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */
#define AT91_CKGR_MCFR (AT91_PMC + 0x24) /* Main Clock Frequency Register */
#define AT91_PMC_MAINF (0xffff << 0) /* Main Clock Frequency */
#define AT91_PMC_MAINRDY (1 << 16) /* Main Clock Ready */
#define AT91_CKGR_PLLAR (AT91_PMC + 0x28) /* PLL A Register */
#define AT91_CKGR_PLLBR (AT91_PMC + 0x2c) /* PLL B Register */
#define AT91_PMC_DIV (0xff << 0) /* Divider */
#define AT91_PMC_PLLCOUNT (0x3f << 8) /* PLL Counter */
#define AT91_PMC_OUT (3 << 14) /* PLL Clock Frequency Range */
#define AT91_PMC_MUL (0x7ff << 16) /* PLL Multiplier */
#define AT91_PMC_USB96M (1 << 28) /* Divider by 2 Enable (PLLB only) */
#define AT91_PMC_MCKR (AT91_PMC + 0x30) /* Master Clock Register */
#define AT91_PMC_CSS (3 << 0) /* Master Clock Selection */
#define AT91_PMC_CSS_SLOW (0 << 0)
#define AT91_PMC_CSS_MAIN (1 << 0)
#define AT91_PMC_CSS_PLLA (2 << 0)
#define AT91_PMC_CSS_PLLB (3 << 0)
#define AT91_PMC_PRES (7 << 2) /* Master Clock Prescaler */
#define AT91_PMC_PRES_1 (0 << 2)
#define AT91_PMC_PRES_2 (1 << 2)
#define AT91_PMC_PRES_4 (2 << 2)
#define AT91_PMC_PRES_8 (3 << 2)
#define AT91_PMC_PRES_16 (4 << 2)
#define AT91_PMC_PRES_32 (5 << 2)
#define AT91_PMC_PRES_64 (6 << 2)
#define AT91_PMC_MDIV (3 << 8) /* Master Clock Division */
#define AT91_PMC_MDIV_1 (0 << 8)
#define AT91_PMC_MDIV_2 (1 << 8)
#define AT91_PMC_MDIV_3 (2 << 8)
#define AT91_PMC_MDIV_4 (3 << 8)
#define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-3 Registers */
#define AT91_PMC_IER (AT91_PMC + 0x60) /* Interrupt Enable Register */
#define AT91_PMC_IDR (AT91_PMC + 0x64) /* Interrupt Disable Register */
#define AT91_PMC_SR (AT91_PMC + 0x68) /* Status Register */
#define AT91_PMC_MOSCS (1 << 0) /* MOSCS Flag */
#define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */
#define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */
#define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */
#define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */
#define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */
#define AT91_PMC_PCK2RDY (1 << 10) /* Programmable Clock 2 */
#define AT91_PMC_PCK3RDY (1 << 11) /* Programmable Clock 3 */
#define AT91_PMC_IMR (AT91_PMC + 0x6c) /* Interrupt Mask Register */
/*
* System Timer.
*/
#define AT91_ST 0xd00
#define AT91_ST_CR (AT91_ST + 0x00) /* Control Register */
#define AT91_ST_WDRST (1 << 0) /* Watchdog Timer Restart */
#define AT91_ST_PIMR (AT91_ST + 0x04) /* Period Interval Mode Register */
#define AT91_ST_PIV (0xffff << 0) /* Period Interval Value */
#define AT91_ST_WDMR (AT91_ST + 0x08) /* Watchdog Mode Register */
#define AT91_ST_WDV (0xffff << 0) /* Watchdog Counter Value */
#define AT91_ST_RSTEN (1 << 16) /* Reset Enable */
#define AT91_ST_EXTEN (1 << 17) /* External Signal Assertion Enable */
#define AT91_ST_RTMR (AT91_ST + 0x0c) /* Real-time Mode Register */
#define AT91_ST_RTPRES (0xffff << 0) /* Real-time Prescalar Value */
#define AT91_ST_SR (AT91_ST + 0x10) /* Status Register */
#define AT91_ST_PITS (1 << 0) /* Period Interval Timer Status */
#define AT91_ST_WDOVF (1 << 1) /* Watchdog Overflow */
#define AT91_ST_RTTINC (1 << 2) /* Real-time Timer Increment */
#define AT91_ST_ALMS (1 << 3) /* Alarm Status */
#define AT91_ST_IER (AT91_ST + 0x14) /* Interrupt Enable Register */
#define AT91_ST_IDR (AT91_ST + 0x18) /* Interrupt Disable Register */
#define AT91_ST_IMR (AT91_ST + 0x1c) /* Interrupt Mask Register */
#define AT91_ST_RTAR (AT91_ST + 0x20) /* Real-time Alarm Register */
#define AT91_ST_ALMV (0xfffff << 0) /* Alarm Value */
#define AT91_ST_CRTR (AT91_ST + 0x24) /* Current Real-time Register */
#define AT91_ST_CRTV (0xfffff << 0) /* Current Real-Time Value */
/*
* Real-time Clock.
*/
#define AT91_RTC 0xe00
#define AT91_RTC_CR (AT91_RTC + 0x00) /* Control Register */
#define AT91_RTC_UPDTIM (1 << 0) /* Update Request Time Register */
#define AT91_RTC_UPDCAL (1 << 1) /* Update Request Calendar Register */
#define AT91_RTC_TIMEVSEL (3 << 8) /* Time Event Selection */
#define AT91_RTC_TIMEVSEL_MINUTE (0 << 8)
#define AT91_RTC_TIMEVSEL_HOUR (1 << 8)
#define AT91_RTC_TIMEVSEL_DAY24 (2 << 8)
#define AT91_RTC_TIMEVSEL_DAY12 (3 << 8)
#define AT91_RTC_CALEVSEL (3 << 16) /* Calendar Event Selection */
#define AT91_RTC_CALEVSEL_WEEK (0 << 16)
#define AT91_RTC_CALEVSEL_MONTH (1 << 16)
#define AT91_RTC_CALEVSEL_YEAR (2 << 16)
#define AT91_RTC_MR (AT91_RTC + 0x04) /* Mode Register */
#define AT91_RTC_HRMOD (1 << 0) /* 12/24 Hour Mode */
#define AT91_RTC_TIMR (AT91_RTC + 0x08) /* Time Register */
#define AT91_RTC_SEC (0x7f << 0) /* Current Second */
#define AT91_RTC_MIN (0x7f << 8) /* Current Minute */
#define AT91_RTC_HOUR (0x3f << 16) /* Current Hour */
#define At91_RTC_AMPM (1 << 22) /* Ante Meridiem Post Meridiem Indicator */
#define AT91_RTC_CALR (AT91_RTC + 0x0c) /* Calendar Register */
#define AT91_RTC_CENT (0x7f << 0) /* Current Century */
#define AT91_RTC_YEAR (0xff << 8) /* Current Year */
#define AT91_RTC_MONTH (0x1f << 16) /* Current Month */
#define AT91_RTC_DAY (7 << 21) /* Current Day */
#define AT91_RTC_DATE (0x3f << 24) /* Current Date */
#define AT91_RTC_TIMALR (AT91_RTC + 0x10) /* Time Alarm Register */
#define AT91_RTC_SECEN (1 << 7) /* Second Alarm Enable */
#define AT91_RTC_MINEN (1 << 15) /* Minute Alarm Enable */
#define AT91_RTC_HOUREN (1 << 23) /* Hour Alarm Enable */
#define AT91_RTC_CALALR (AT91_RTC + 0x14) /* Calendar Alarm Register */
#define AT91_RTC_MTHEN (1 << 23) /* Month Alarm Enable */
#define AT91_RTC_DATEEN (1 << 31) /* Date Alarm Enable */
#define AT91_RTC_SR (AT91_RTC + 0x18) /* Status Register */
#define AT91_RTC_ACKUPD (1 << 0) /* Acknowledge for Update */
#define AT91_RTC_ALARM (1 << 1) /* Alarm Flag */
#define AT91_RTC_SECEV (1 << 2) /* Second Event */
#define AT91_RTC_TIMEV (1 << 3) /* Time Event */
#define AT91_RTC_CALEV (1 << 4) /* Calendar Event */
#define AT91_RTC_SCCR (AT91_RTC + 0x1c) /* Status Clear Command Register */
#define AT91_RTC_IER (AT91_RTC + 0x20) /* Interrupt Enable Register */
#define AT91_RTC_IDR (AT91_RTC + 0x24) /* Interrupt Disable Register */
#define AT91_RTC_IMR (AT91_RTC + 0x28) /* Interrupt Mask Register */
#define AT91_RTC_VER (AT91_RTC + 0x2c) /* Valid Entry Register */
#define AT91_RTC_NVTIM (1 << 0) /* Non valid Time */
#define AT91_RTC_NVCAL (1 << 1) /* Non valid Calendar */
#define AT91_RTC_NVTIMALR (1 << 2) /* Non valid Time Alarm */
#define AT91_RTC_NVCALALR (1 << 3) /* Non valid Calendar Alarm */
/*
* Memory Controller.
*/
#define AT91_MC 0xf00
#define AT91_MC_RCR (AT91_MC + 0x00) /* MC Remap Control Register */
#define AT91_MC_RCB (1 << 0) /* Remap Command Bit */
#define AT91_MC_ASR (AT91_MC + 0x04) /* MC Abort Status Register */
#define AT91_MC_AASR (AT91_MC + 0x08) /* MC Abort Address Status Register */
#define AT91_MC_MPR (AT91_MC + 0x0c) /* MC Master Priority Register */
/* External Bus Interface (EBI) registers */
#define AT91_EBI_CSA (AT91_MC + 0x60) /* Chip Select Assignment Register */
#define AT91_EBI_CS0A (1 << 0) /* Chip Select 0 Assignment */
#define AT91_EBI_CS0A_SMC (0 << 0)
#define AT91_EBI_CS0A_BFC (1 << 0)
#define AT91_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */
#define AT91_EBI_CS1A_SMC (0 << 1)
#define AT91_EBI_CS1A_SDRAMC (1 << 1)
#define AT91_EBI_CS3A (1 << 3) /* Chip Select 2 Assignment */
#define AT91_EBI_CS3A_SMC (0 << 3)
#define AT91_EBI_CS3A_SMC_SMARTMEDIA (1 << 3)
#define AT91_EBI_CS4A (1 << 4) /* Chip Select 3 Assignment */
#define AT91_EBI_CS4A_SMC (0 << 4)
#define AT91_EBI_CS4A_SMC_COMPACTFLASH (1 << 4)
#define AT91_EBI_CFGR (AT91_MC + 0x64) /* Configuration Register */
#define AT91_EBI_DBPUC (1 << 0) /* Data Bus Pull-Up Configuration */
/* Static Memory Controller (SMC) registers */
#define AT91_SMC_CSR(n) (AT91_MC + 0x70 + ((n) * 4))/* SMC Chip Select Register */
#define AT91_SMC_NWS (0x7f << 0) /* Number of Wait States */
#define AT91_SMC_WSEN (1 << 7) /* Wait State Enable */
#define AT91_SMC_TDF (0xf << 8) /* Data Float Time */
#define AT91_SMC_BAT (1 << 12) /* Byte Access Type */
#define AT91_SMC_DBW (3 << 13) /* Data Bus Width */
#define AT91_SMC_DBW_16 (1 << 13)
#define AT91_SMC_DBW_8 (2 << 13)
#define AT91_SMC_DPR (1 << 15) /* Data Read Protocol */
#define AT91_SMC_ACSS (3 << 16) /* Address to Chip Select Setup */
#define AT91_SMC_ACSS_STD (0 << 16)
#define AT91_SMC_ACSS_1 (1 << 16)
#define AT91_SMC_ACSS_2 (2 << 16)
#define AT91_SMC_ACSS_3 (3 << 16)
#define AT91_SMC_RWSETUP (7 << 24) /* Read & Write Signal Time Setup */
#define AT91_SMC_RWHOLD (7 << 28) /* Read & Write Signal Hold Time */
#endif
include/asm-arm/arch-at91rm9200/board.h 0 → 100644
View file @ 3995f4c5
/*
* include/asm-arm/arch-at91rm9200/board.h
*
* Copyright (C) 2005 HP Labs
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
* These are data structures found in platform_device.dev.platform_data,
* and describing board-specfic data needed by drivers. For example,
* which pin is used for a given GPIO role.
*
* In 2.6, drivers should strongly avoid board-specific knowledge so
* that supporting new boards normally won't require driver patches.
* Most board-specific knowledge should be in arch/.../board-*.c files.
*/
#ifndef __ASM_ARCH_BOARD_H
#define __ASM_ARCH_BOARD_H
/* Clocks */
extern unsigned long at91_master_clock;
/* Serial Port */
extern int at91_serial_map[AT91_NR_UART];
extern int at91_console_port;
/* USB Device */
struct at91_udc_data {
u8 vbus_pin; /* high == host powering us */
u8 pullup_pin; /* high == D+ pulled up */
};
extern void __init at91_add_device_udc(struct at91_udc_data *data);
/* Compact Flash */
struct at91_cf_data {
u8 irq_pin; /* I/O IRQ */
u8 det_pin; /* Card detect */
u8 vcc_pin; /* power switching */
u8 rst_pin; /* card reset */
};
extern void __init at91_add_device_cf(struct at91_cf_data *data);
/* MMC / SD */
struct at91_mmc_data {
u8 det_pin; /* card detect IRQ */
unsigned is_b:1; /* uses B side (vs A) */
unsigned wire4:1; /* (SD) supports DAT0..DAT3 */
u8 wp_pin; /* (SD) writeprotect detect */
u8 vcc_pin; /* power switching (high == on) */
};
extern void __init at91_add_device_mmc(struct at91_mmc_data *data);
/* Ethernet */
struct at91_eth_data {
u8 phy_irq_pin; /* PHY IRQ */
u8 is_rmii; /* using RMII interface? */
};
extern void __init at91_add_device_eth(struct at91_eth_data *data);
/* USB Host */
struct at91_usbh_data {
u8 ports; /* number of ports on root hub */
};
extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
#endif
include/asm-arm/arch-at91rm9200/debug-macro.S 0 → 100644
View file @ 3995f4c5
/*
* include/asm-arm/arch-at91rm9200/debug-macro.S
*
* Copyright (C) 2003-2005 SAN People
*
* Debugging macro include header
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <asm/hardware.h>
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =AT91_BASE_SYS @ System peripherals (phys address)
ldrne \rx, =AT91_VA_BASE_SYS @ System peripherals (virt address)
.endm
.macro senduart,rd,rx
strb \rd, [\rx, #AT91_DBGU_THR] @ Write to Transmitter Holding Register
.endm
.macro waituart,rd,rx
1001: ldr \rd, [\rx, #AT91_DBGU_SR] @ Read Status Register
tst \rd, #AT91_DBGU_TXRDY @ DBGU_TXRDY = 1 when ready to transmit
beq 1001b
.endm
.macro busyuart,rd,rx
1001: ldr \rd, [\rx, #AT91_DBGU_SR] @ Read Status Register
tst \rd, #AT91_DBGU_TXEMPTY @ DBGU_TXEMPTY = 1 when transmission complete
beq 1001b
.endm
include/asm-arm/arch-epxa10db/param.h → include/asm-arm/arch-at91rm9200/dma.h
View file @ 3995f4c5
/*
* linux/include/asm-arm/arch-epxa10db/param.h
* include/asm-arm/arch-at91rm9200/dma.h
*
* Copyright (C) 1999 ARM Limited
* Copyright (C) 2003 SAN People
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
......
include/asm-arm/arch-at91rm9200/entry-macro.S 0 → 100644
View file @ 3995f4c5
/*
* include/asm-arm/arch-at91rm9200/entry-macro.S
*
* Copyright (C) 2003-2005 SAN People
*
* Low-level IRQ helper macros for AT91RM9200 platforms
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <asm/hardware.h>
.macro disable_fiq
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \base, =(AT91_VA_BASE_SYS) @ base virtual address of SYS peripherals
ldr \irqnr, [\base, #AT91_AIC_IVR] @ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
ldr \irqstat, [\base, #AT91_AIC_ISR] @ read interrupt source number
teq \irqstat, #0 @ ISR is 0 when no current interrupt, or spurious interrupt
streq \tmp, [\base, #AT91_AIC_EOICR] @ not going to be handled further, then ACK it now.
.endm
include/asm-arm/arch-at91rm9200/gpio.h 0 → 100644
View file @ 3995f4c5
/*
* include/asm-arm/arch-at91rm9200/gpio.h
*
* Copyright (C) 2005 HP Labs
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*/
#ifndef __ASM_ARCH_AT91RM9200_GPIO_H
#define __ASM_ARCH_AT91RM9200_GPIO_H
#define PIN_BASE NR_AIC_IRQS
#define PQFP_GPIO_BANKS 3 /* PQFP package has 3 banks */
#define BGA_GPIO_BANKS 4 /* BGA package has 4 banks */
/* these pin numbers double as IRQ numbers, like AT91_ID_* values */
#define AT91_PIN_PA0 (PIN_BASE + 0x00 + 0)
#define AT91_PIN_PA1 (PIN_BASE + 0x00 + 1)
#define AT91_PIN_PA2 (PIN_BASE + 0x00 + 2)
#define AT91_PIN_PA3 (PIN_BASE + 0x00 + 3)
#define AT91_PIN_PA4 (PIN_BASE + 0x00 + 4)
#define AT91_PIN_PA5 (PIN_BASE + 0x00 + 5)
#define AT91_PIN_PA6 (PIN_BASE + 0x00 + 6)
#define AT91_PIN_PA7 (PIN_BASE + 0x00 + 7)
#define AT91_PIN_PA8 (PIN_BASE + 0x00 + 8)
#define AT91_PIN_PA9 (PIN_BASE + 0x00 + 9)
#define AT91_PIN_PA10 (PIN_BASE + 0x00 + 10)
#define AT91_PIN_PA11 (PIN_BASE + 0x00 + 11)
#define AT91_PIN_PA12 (PIN_BASE + 0x00 + 12)
#define AT91_PIN_PA13 (PIN_BASE + 0x00 + 13)
#define AT91_PIN_PA14 (PIN_BASE + 0x00 + 14)
#define AT91_PIN_PA15 (PIN_BASE + 0x00 + 15)
#define AT91_PIN_PA16 (PIN_BASE + 0x00 + 16)
#define AT91_PIN_PA17 (PIN_BASE + 0x00 + 17)
#define AT91_PIN_PA18 (PIN_BASE + 0x00 + 18)
#define AT91_PIN_PA19 (PIN_BASE + 0x00 + 19)
#define AT91_PIN_PA20 (PIN_BASE + 0x00 + 20)
#define AT91_PIN_PA21 (PIN_BASE + 0x00 + 21)
#define AT91_PIN_PA22 (PIN_BASE + 0x00 + 22)
#define AT91_PIN_PA23 (PIN_BASE + 0x00 + 23)
#define AT91_PIN_PA24 (PIN_BASE + 0x00 + 24)
#define AT91_PIN_PA25 (PIN_BASE + 0x00 + 25)
#define AT91_PIN_PA26 (PIN_BASE + 0x00 + 26)
#define AT91_PIN_PA27 (PIN_BASE + 0x00 + 27)
#define AT91_PIN_PA28 (PIN_BASE + 0x00 + 28)
#define AT91_PIN_PA29 (PIN_BASE + 0x00 + 29)
#define AT91_PIN_PA30 (PIN_BASE + 0x00 + 30)
#define AT91_PIN_PA31 (PIN_BASE + 0x00 + 31)
#define AT91_PIN_PB0 (PIN_BASE + 0x20 + 0)
#define AT91_PIN_PB1 (PIN_BASE + 0x20 + 1)
#define AT91_PIN_PB2 (PIN_BASE + 0x20 + 2)
#define AT91_PIN_PB3 (PIN_BASE + 0x20 + 3)
#define AT91_PIN_PB4 (PIN_BASE + 0x20 + 4)
#define AT91_PIN_PB5 (PIN_BASE + 0x20 + 5)
#define AT91_PIN_PB6 (PIN_BASE + 0x20 + 6)
#define AT91_PIN_PB7 (PIN_BASE + 0x20 + 7)
#define AT91_PIN_PB8 (PIN_BASE + 0x20 + 8)
#define AT91_PIN_PB9 (PIN_BASE + 0x20 + 9)
#define AT91_PIN_PB10 (PIN_BASE + 0x20 + 10)
#define AT91_PIN_PB11 (PIN_BASE + 0x20 + 11)
#define AT91_PIN_PB12 (PIN_BASE + 0x20 + 12)
#define AT91_PIN_PB13 (PIN_BASE + 0x20 + 13)
#define AT91_PIN_PB14 (PIN_BASE + 0x20 + 14)
#define AT91_PIN_PB15 (PIN_BASE + 0x20 + 15)
#define AT91_PIN_PB16 (PIN_BASE + 0x20 + 16)
#define AT91_PIN_PB17 (PIN_BASE + 0x20 + 17)
#define AT91_PIN_PB18 (PIN_BASE + 0x20 + 18)
#define AT91_PIN_PB19 (PIN_BASE + 0x20 + 19)
#define AT91_PIN_PB20 (PIN_BASE + 0x20 + 20)
#define AT91_PIN_PB21 (PIN_BASE + 0x20 + 21)
#define AT91_PIN_PB22 (PIN_BASE + 0x20 + 22)
#define AT91_PIN_PB23 (PIN_BASE + 0x20 + 23)
#define AT91_PIN_PB24 (PIN_BASE + 0x20 + 24)
#define AT91_PIN_PB25 (PIN_BASE + 0x20 + 25)
#define AT91_PIN_PB26 (PIN_BASE + 0x20 + 26)
#define AT91_PIN_PB27 (PIN_BASE + 0x20 + 27)
#define AT91_PIN_PB28 (PIN_BASE + 0x20 + 28)
#define AT91_PIN_PB29 (PIN_BASE + 0x20 + 29)
#define AT91_PIN_PB30 (PIN_BASE + 0x20 + 30)
#define AT91_PIN_PB31 (PIN_BASE + 0x20 + 31)
#define AT91_PIN_PC0 (PIN_BASE + 0x40 + 0)
#define AT91_PIN_PC1 (PIN_BASE + 0x40 + 1)
#define AT91_PIN_PC2 (PIN_BASE + 0x40 + 2)
#define AT91_PIN_PC3 (PIN_BASE + 0x40 + 3)
#define AT91_PIN_PC4 (PIN_BASE + 0x40 + 4)
#define AT91_PIN_PC5 (PIN_BASE + 0x40 + 5)
#define AT91_PIN_PC6 (PIN_BASE + 0x40 + 6)
#define AT91_PIN_PC7 (PIN_BASE + 0x40 + 7)
#define AT91_PIN_PC8 (PIN_BASE + 0x40 + 8)
#define AT91_PIN_PC9 (PIN_BASE + 0x40 + 9)
#define AT91_PIN_PC10 (PIN_BASE + 0x40 + 10)
#define AT91_PIN_PC11 (PIN_BASE + 0x40 + 11)
#define AT91_PIN_PC12 (PIN_BASE + 0x40 + 12)
#define AT91_PIN_PC13 (PIN_BASE + 0x40 + 13)
#define AT91_PIN_PC14 (PIN_BASE + 0x40 + 14)
#define AT91_PIN_PC15 (PIN_BASE + 0x40 + 15)
#define AT91_PIN_PC16 (PIN_BASE + 0x40 + 16)
#define AT91_PIN_PC17 (PIN_BASE + 0x40 + 17)
#define AT91_PIN_PC18 (PIN_BASE + 0x40 + 18)
#define AT91_PIN_PC19 (PIN_BASE + 0x40 + 19)
#define AT91_PIN_PC20 (PIN_BASE + 0x40 + 20)
#define AT91_PIN_PC21 (PIN_BASE + 0x40 + 21)
#define AT91_PIN_PC22 (PIN_BASE + 0x40 + 22)
#define AT91_PIN_PC23 (PIN_BASE + 0x40 + 23)
#define AT91_PIN_PC24 (PIN_BASE + 0x40 + 24)
#define AT91_PIN_PC25 (PIN_BASE + 0x40 + 25)
#define AT91_PIN_PC26 (PIN_BASE + 0x40 + 26)
#define AT91_PIN_PC27 (PIN_BASE + 0x40 + 27)
#define AT91_PIN_PC28 (PIN_BASE + 0x40 + 28)
#define AT91_PIN_PC29 (PIN_BASE + 0x40 + 29)
#define AT91_PIN_PC30 (PIN_BASE + 0x40 + 30)
#define AT91_PIN_PC31 (PIN_BASE + 0x40 + 31)
#define AT91_PIN_PD0 (PIN_BASE + 0x60 + 0)
#define AT91_PIN_PD1 (PIN_BASE + 0x60 + 1)
#define AT91_PIN_PD2 (PIN_BASE + 0x60 + 2)
#define AT91_PIN_PD3 (PIN_BASE + 0x60 + 3)
#define AT91_PIN_PD4 (PIN_BASE + 0x60 + 4)
#define AT91_PIN_PD5 (PIN_BASE + 0x60 + 5)
#define AT91_PIN_PD6 (PIN_BASE + 0x60 + 6)
#define AT91_PIN_PD7 (PIN_BASE + 0x60 + 7)
#define AT91_PIN_PD8 (PIN_BASE + 0x60 + 8)
#define AT91_PIN_PD9 (PIN_BASE + 0x60 + 9)
#define AT91_PIN_PD10 (PIN_BASE + 0x60 + 10)
#define AT91_PIN_PD11 (PIN_BASE + 0x60 + 11)
#define AT91_PIN_PD12 (PIN_BASE + 0x60 + 12)
#define AT91_PIN_PD13 (PIN_BASE + 0x60 + 13)
#define AT91_PIN_PD14 (PIN_BASE + 0x60 + 14)
#define AT91_PIN_PD15 (PIN_BASE + 0x60 + 15)
#define AT91_PIN_PD16 (PIN_BASE + 0x60 + 16)
#define AT91_PIN_PD17 (PIN_BASE + 0x60 + 17)
#define AT91_PIN_PD18 (PIN_BASE + 0x60 + 18)
#define AT91_PIN_PD19 (PIN_BASE + 0x60 + 19)
#define AT91_PIN_PD20 (PIN_BASE + 0x60 + 20)
#define AT91_PIN_PD21 (PIN_BASE + 0x60 + 21)
#define AT91_PIN_PD22 (PIN_BASE + 0x60 + 22)
#define AT91_PIN_PD23 (PIN_BASE + 0x60 + 23)
#define AT91_PIN_PD24 (PIN_BASE + 0x60 + 24)
#define AT91_PIN_PD25 (PIN_BASE + 0x60 + 25)
#define AT91_PIN_PD26 (PIN_BASE + 0x60 + 26)
#define AT91_PIN_PD27 (PIN_BASE + 0x60 + 27)
#define AT91_PIN_PD28 (PIN_BASE + 0x60 + 28)
#define AT91_PIN_PD29 (PIN_BASE + 0x60 + 29)
#define AT91_PIN_PD30 (PIN_BASE + 0x60 + 30)
#define AT91_PIN_PD31 (PIN_BASE + 0x60 + 31)
#ifndef __ASSEMBLY__
/* setup setup routines, called from board init or driver probe() */
extern int at91_set_A_periph(unsigned pin, int use_pullup);
extern int at91_set_B_periph(unsigned pin, int use_pullup);
extern int at91_set_gpio_input(unsigned pin, int use_pullup);
extern int at91_set_gpio_output(unsigned pin, int value);
extern int at91_set_deglitch(unsigned pin, int is_on);
/* callable at any time */
extern int at91_set_gpio_value(unsigned pin, int value);
extern int at91_get_gpio_value(unsigned pin);
#endif
#endif
include/asm-arm/arch-at91rm9200/hardware.h 0 → 100644
View file @ 3995f4c5
/*
* include/asm-arm/arch-at91rm9200/hardware.h
*
* Copyright (C) 2003 SAN People
* Copyright (C) 2003 ATMEL
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*/
#ifndef __ASM_ARCH_HARDWARE_H
#define __ASM_ARCH_HARDWARE_H
#include <asm/sizes.h>
#include <asm/arch/at91rm9200.h>
#include <asm/arch/at91rm9200_sys.h>
/*
* Remap the peripherals from address 0xFFFA0000 .. 0xFFFFFFFF
* to 0xFEFA0000 .. 0xFF000000. (384Kb)
*/
#define AT91_IO_PHYS_BASE 0xFFFA0000
#define AT91_IO_SIZE (0xFFFFFFFF - AT91_IO_PHYS_BASE + 1)
#define AT91_IO_VIRT_BASE (0xFF000000 - AT91_IO_SIZE)
/* Convert a physical IO address to virtual IO address */
#define AT91_IO_P2V(x) ((x) - AT91_IO_PHYS_BASE + AT91_IO_VIRT_BASE)
/*
* Virtual to Physical Address mapping for IO devices.
*/
#define AT91_VA_BASE_SYS AT91_IO_P2V(AT91_BASE_SYS)
#define AT91_VA_BASE_SPI AT91_IO_P2V(AT91_BASE_SPI)
#define AT91_VA_BASE_SSC2 AT91_IO_P2V(AT91_BASE_SSC2)
#define AT91_VA_BASE_SSC1 AT91_IO_P2V(AT91_BASE_SSC1)
#define AT91_VA_BASE_SSC0 AT91_IO_P2V(AT91_BASE_SSC0)
#define AT91_VA_BASE_US3 AT91_IO_P2V(AT91_BASE_US3)
#define AT91_VA_BASE_US2 AT91_IO_P2V(AT91_BASE_US2)
#define AT91_VA_BASE_US1 AT91_IO_P2V(AT91_BASE_US1)
#define AT91_VA_BASE_US0 AT91_IO_P2V(AT91_BASE_US0)
#define AT91_VA_BASE_EMAC AT91_IO_P2V(AT91_BASE_EMAC)
#define AT91_VA_BASE_TWI AT91_IO_P2V(AT91_BASE_TWI)
#define AT91_VA_BASE_MCI AT91_IO_P2V(AT91_BASE_MCI)
#define AT91_VA_BASE_UDP AT91_IO_P2V(AT91_BASE_UDP)
#define AT91_VA_BASE_TCB1 AT91_IO_P2V(AT91_BASE_TCB1)
#define AT91_VA_BASE_TCB0 AT91_IO_P2V(AT91_BASE_TCB0)
/* Internal SRAM */
#define AT91_BASE_SRAM 0x00200000 /* Internal SRAM base address */
#define AT91_SRAM_SIZE 0x00004000 /* Internal SRAM SIZE (16Kb) */
/* Serial ports */
#define AT91_NR_UART 5 /* 4 USART3's and one DBGU port */
/* FLASH */
#define AT91_FLASH_BASE 0x10000000 /* NCS0: Flash physical base address */
/* SDRAM */
#define AT91_SDRAM_BASE 0x20000000 /* NCS1: SDRAM physical base address */
/* SmartMedia */
#define AT91_SMARTMEDIA_BASE 0x40000000 /* NCS3: Smartmedia physical base address */
/* Multi-Master Memory controller */
#define AT91_UHP_BASE 0x00300000 /* USB Host controller */
/* Clocks */
#define AT91_SLOW_CLOCK 32768 /* slow clock */
#ifndef __ASSEMBLY__
#include <asm/io.h>
static inline unsigned int at91_sys_read(unsigned int reg_offset)
{
void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
return readl(addr + reg_offset);
}
static inline void at91_sys_write(unsigned int reg_offset, unsigned long value)
{
void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
writel(value, addr + reg_offset);
}
#endif
#endif
include/asm-arm/arch-at91rm9200/io.h 0 → 100644
View file @ 3995f4c5
/*
* include/asm-arm/arch-at91rm9200/io.h
*
* Copyright (C) 2003 SAN People
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARCH_IO_H
#define __ASM_ARCH_IO_H
#include <asm/arch/at91rm9200.h>
#include <asm/io.h>
#define IO_SPACE_LIMIT 0xFFFFFFFF
#define __io(a) ((void __iomem *)(a))
#define __mem_pci(a) (a)
#endif
include/asm-arm/arch-epxa10db/io.h → include/asm-arm/arch-at91rm9200/irqs.h
View file @ 3995f4c5
/*
* linux/include/asm-arm/arch-epxa10db/io.h
* include/asm-arm/arch-at91rm9200/irqs.h
*
* Copyright (C) 1999 ARM Limited
* Copyright (C) 2004 SAN People
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
......@@ -17,25 +17,36 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
#include <asm/hardware.h>
#ifndef __ASM_ARCH_IRQS_H
#define __ASM_ARCH_IRQS_H
#define IO_SPACE_LIMIT 0xffff
#define NR_AIC_IRQS 32
/*
* Generic virtual read/write
* Acknowledge interrupt with AIC after interrupt has been handled.
* (by kernel/irq.c)
*/
/*#define outsw __arch_writesw
#define outsl __arch_writesl
#define outsb __arch_writesb
#define insb __arch_readsb
#define insw __arch_readsw
#define insl __arch_readsl*/
#define __io(a) ((void __iomem *)(a))
#define __mem_pci(a) (a)
#define irq_finish(irq) do { at91_sys_write(AT91_AIC_EOICR, 0); } while (0)
/*
* IRQ interrupt symbols are the AT91_ID_* symbols in at91rm9200.h
* for IRQs handled directly through the AIC, or else the AT91_PIN_*
* symbols in gpio.h for ones handled indirectly as GPIOs.
* We make provision for 4 banks of GPIO.
*/
#include <asm/arch/gpio.h>
#define NR_IRQS (NR_AIC_IRQS + (4 * 32))
#ifndef __ASSEMBLY__
/*
* Initialize the IRQ controller.
*/
extern void at91rm9200_init_irq(unsigned int priority[]);
#endif
#endif
include/asm-arm/arch-epxa10db/memory.h → include/asm-arm/arch-at91rm9200/memory.h
View file @ 3995f4c5
/*
* linux/include/asm-arm/arch-epxa10/memory.h
* include/asm-arm/arch-at91rm9200/memory.h
*
* Copyright (C) 2001 Altera Corporation
* Copyright (C) 2004 SAN People
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
......@@ -17,13 +17,14 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
/*
* Physical DRAM offset.
*/
#define PHYS_OFFSET UL(0x00000000)
#include <asm/arch/hardware.h>
#define PHYS_OFFSET (AT91_SDRAM_BASE)
/*
* Virtual view <-> DMA view memory address translations
......@@ -32,7 +33,9 @@
* bus_to_virt: Used to convert an address for DMA operations
* to an address that the kernel can use.
*/
#define __virt_to_bus(x) (x - PAGE_OFFSET + /*SDRAM_BASE*/0)
#define __bus_to_virt(x) (x - /*SDRAM_BASE*/0 + PAGE_OFFSET)
#define __virt_to_bus__is_a_macro
#define __virt_to_bus(x) __virt_to_phys(x)
#define __bus_to_virt__is_a_macro
#define __bus_to_virt(x) __phys_to_virt(x)
#endif
include/asm-arm/arch-epxa10db/dma.h → include/asm-arm/arch-at91rm9200/param.h
View file @ 3995f4c5
/*
* linux/include/asm-arm/arch-camelot/dma.h
* include/asm-arm/arch-at91rm9200/param.h
*
* Copyright (C) 1997,1998 Russell King
* Copyright (C) 2003 SAN People
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
......@@ -17,3 +17,12 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARCH_PARAM_H
#define __ASM_ARCH_PARAM_H
/*
* We use default params
*/
#endif
include/asm-arm/arch-at91rm9200/pio.h 0 → 100644
View file @ 3995f4c5
/*
* include/asm-arm/arch-at91rm9200/pio.h
*
* Copyright (C) 2003 SAN People
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*/
#ifndef __ASM_ARCH_PIO_H
#define __ASM_ARCH_PIO_H
#include <asm/arch/hardware.h>
static inline void AT91_CfgPIO_USART0(void) {
at91_sys_write(AT91_PIOA + PIO_PDR, AT91_PA17_TXD0 | AT91_PA18_RXD0 | AT91_PA20_CTS0);
/*
* Errata #39 - RTS0 is not internally connected to PA21. We need to drive
* the pin manually. Default is off (RTS is active low).
*/
at91_sys_write(AT91_PIOA + PIO_PER, AT91_PA21_RTS0);
at91_sys_write(AT91_PIOA + PIO_OER, AT91_PA21_RTS0);
at91_sys_write(AT91_PIOA + PIO_SODR, AT91_PA21_RTS0);
}
static inline void AT91_CfgPIO_USART1(void) {
at91_sys_write(AT91_PIOB + PIO_PDR, AT91_PB18_RI1 | AT91_PB19_DTR1
| AT91_PB20_TXD1 | AT91_PB21_RXD1 | AT91_PB23_DCD1
| AT91_PB24_CTS1 | AT91_PB25_DSR1 | AT91_PB26_RTS1);
}
static inline void AT91_CfgPIO_USART2(void) {
at91_sys_write(AT91_PIOA + PIO_PDR, AT91_PA22_RXD2 | AT91_PA23_TXD2);
}
static inline void AT91_CfgPIO_USART3(void) {
at91_sys_write(AT91_PIOA + PIO_PDR, AT91_PA5_TXD3 | AT91_PA6_RXD3);
at91_sys_write(AT91_PIOA + PIO_BSR, AT91_PA5_TXD3 | AT91_PA6_RXD3);
}
static inline void AT91_CfgPIO_DBGU(void) {
at91_sys_write(AT91_PIOA + PIO_PDR, AT91_PA31_DTXD | AT91_PA30_DRXD);
}
/*
* Enable the Two-Wire interface.
*/
static inline void AT91_CfgPIO_TWI(void) {
at91_sys_write(AT91_PIOA + PIO_PDR, AT91_PA25_TWD | AT91_PA26_TWCK);
at91_sys_write(AT91_PIOA + PIO_ASR, AT91_PA25_TWD | AT91_PA26_TWCK);
at91_sys_write(AT91_PIOA + PIO_MDER, AT91_PA25_TWD | AT91_PA26_TWCK); /* open drain */
}
/*
* Enable the Serial Peripheral Interface.
*/
static inline void AT91_CfgPIO_SPI(void) {
at91_sys_write(AT91_PIOA + PIO_PDR, AT91_PA0_MISO | AT91_PA1_MOSI | AT91_PA2_SPCK);
}
static inline void AT91_CfgPIO_SPI_CS0(void) {
at91_sys_write(AT91_PIOA + PIO_PDR, AT91_PA3_NPCS0);
}
static inline void AT91_CfgPIO_SPI_CS1(void) {
at91_sys_write(AT91_PIOA + PIO_PDR, AT91_PA4_NPCS1);
}
static inline void AT91_CfgPIO_SPI_CS2(void) {
at91_sys_write(AT91_PIOA + PIO_PDR, AT91_PA5_NPCS2);
}
static inline void AT91_CfgPIO_SPI_CS3(void) {
at91_sys_write(AT91_PIOA + PIO_PDR, AT91_PA6_NPCS3);
}
/*
* Select the DataFlash card.
*/
static inline void AT91_CfgPIO_DataFlashCard(void) {
at91_sys_write(AT91_PIOB + PIO_PER, AT91_PIO_P(7));
at91_sys_write(AT91_PIOB + PIO_OER, AT91_PIO_P(7));
at91_sys_write(AT91_PIOB + PIO_CODR, AT91_PIO_P(7));
}
/*
* Enable NAND Flash (SmartMedia) interface.
*/
static inline void AT91_CfgPIO_SmartMedia(void) {
/* enable PC0=SMCE, PC1=SMOE, PC3=SMWE, A21=CLE, A22=ALE */
at91_sys_write(AT91_PIOC + PIO_ASR, AT91_PC0_BFCK | AT91_PC1_BFRDY_SMOE | AT91_PC3_BFBAA_SMWE);
at91_sys_write(AT91_PIOC + PIO_PDR, AT91_PC0_BFCK | AT91_PC1_BFRDY_SMOE | AT91_PC3_BFBAA_SMWE);
/* Configure PC2 as input (signal READY of the SmartMedia) */
at91_sys_write(AT91_PIOC + PIO_PER, AT91_PC2_BFAVD); /* enable direct output enable */
at91_sys_write(AT91_PIOC + PIO_ODR, AT91_PC2_BFAVD); /* disable output */
/* Configure PB1 as input (signal Card Detect of the SmartMedia) */
at91_sys_write(AT91_PIOB + PIO_PER, AT91_PIO_P(1)); /* enable direct output enable */
at91_sys_write(AT91_PIOB + PIO_ODR, AT91_PIO_P(1)); /* disable output */
}
static inline int AT91_PIO_SmartMedia_RDY(void) {
return (at91_sys_read(AT91_PIOC + PIO_PDSR) & AT91_PIO_P(2)) ? 1 : 0;
}
static inline int AT91_PIO_SmartMedia_CardDetect(void) {
return (at91_sys_read(AT91_PIOB + PIO_PDSR) & AT91_PIO_P(1)) ? 1 : 0;
}
#endif
include/asm-arm/arch-epxa10db/system.h → include/asm-arm/arch-at91rm9200/system.h
View file @ 3995f4c5
/*
* linux/include/asm-arm/arch-epxa10db/system.h
* include/asm-arm/arch-at91rm9200/system.h
*
* Copyright (C) 1999 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd
* Copyright (C) 2001 Altera Corporation
* Copyright (C) 2003 SAN People
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
......@@ -19,23 +17,35 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
#include <asm/arch/platform.h>
#include <asm/arch/hardware.h>
static inline void arch_idle(void)
{
/*
* This should do all the clock switching
* and wait for interrupt tricks
* Disable the processor clock. The processor will be automatically
* re-enabled by an interrupt or by a reset.
*/
// at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
/*
* Set the processor (CP15) into 'Wait for Interrupt' mode.
* Unlike disabling the processor clock via the PMC (above)
* this allows the processor to be woken via JTAG.
*/
cpu_do_idle();
}
extern __inline__ void arch_reset(char mode)
static inline void arch_reset(char mode)
{
/* Hmm... We can probably do something with the watchdog... */
/*
* Perform a hardware reset with the use of the Watchdog timer.
*/
at91_sys_write(AT91_ST_WDMR, AT91_ST_RSTEN | AT91_ST_EXTEN | 1);
at91_sys_write(AT91_ST_CR, AT91_ST_WDRST);
}
#endif
include/asm-arm/arch-epxa10db/vmalloc.h → include/asm-arm/arch-at91rm9200/timex.h
View file @ 3995f4c5
/*
* linux/include/asm-arm/arch-epxa10db/vmalloc.h
* include/asm-arm/arch-at91rm9200/timex.h
*
* Copyright (C) 2000 Russell King.
* Copyright (C) 2003 SAN People
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
......@@ -17,4 +17,12 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define VMALLOC_END (PAGE_OFFSET + 0x10000000)
#ifndef __ASM_ARCH_TIMEX_H
#define __ASM_ARCH_TIMEX_H
#include <asm/arch/hardware.h>
#define CLOCK_TICK_RATE (AT91_SLOW_CLOCK)
#endif
include/asm-arm/arch-epxa10db/uncompress.h → include/asm-arm/arch-at91rm9200/uncompress.h
View file @ 3995f4c5
/*
* linux/include/asm-arm/arch-epxa10db/uncompress.h
* include/asm-arm/arch-at91rm9200/uncompress.h
*
* Copyright (C) 1999 ARM Limited
* Copyright (C) 2001 Altera Corporation
* Copyright (C) 2003 SAN People
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
......@@ -18,37 +17,39 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include "asm/arch/platform.h"
#include "asm/hardware.h"
#define UART00_TYPE (volatile unsigned int*)
#include "asm/arch/uart00.h"
#ifndef __ASM_ARCH_UNCOMPRESS_H
#define __ASM_ARCH_UNCOMPRESS_H
#include <asm/arch/hardware.h>
/*
* The following code assumes the serial port has already been
* initialized by the bootloader. We search for the first enabled
* port in the most probable order. If you didn't setup a port in
* your bootloader then nothing will appear (which might be desired).
*
* This does not append a newline
*/
static void putstr(const char *s)
{
while (*s) {
while ((*UART_TSR(EXC_UART00_BASE) &
UART_TSR_TX_LEVEL_MSK)==15)
barrier();
*UART_TD(EXC_UART00_BASE) = *s;
void __iomem *sys = (void __iomem *) AT91_BASE_SYS; /* physical address */
while (*s) {
while (!(__raw_readl(sys + AT91_DBGU_SR) & AT91_DBGU_TXRDY)) { barrier(); }
__raw_writel(*s, sys + AT91_DBGU_THR);
if (*s == '\n') {
while ((*UART_TSR(EXC_UART00_BASE) &
UART_TSR_TX_LEVEL_MSK)==15)
barrier();
*UART_TD(EXC_UART00_BASE) = '\r';
while (!(__raw_readl(sys + AT91_DBGU_SR) & AT91_DBGU_TXRDY)) { barrier(); }
__raw_writel('\r', sys + AT91_DBGU_THR);
}
s++;
}
/* wait for transmission to complete */
while (!(__raw_readl(sys + AT91_DBGU_SR) & AT91_DBGU_TXEMPTY)) { barrier(); }
}
/*
* nothing to do
*/
#define arch_decomp_setup()
#define arch_decomp_wdog()
#endif
include/asm-arm/arch-epxa10db/timex.h → include/asm-arm/arch-at91rm9200/vmalloc.h
View file @ 3995f4c5
/*
* linux/include/asm-arm/arch-epxa10db/timex.h
* include/asm-arm/arch-at91rm9200/vmalloc.h
*
* Excalibur timex specifications
*
* Copyright (C) 2001 Altera Corporation
* Copyright (C) 2003 SAN People
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
......@@ -20,7 +18,9 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
* ??
*/
#define CLOCK_TICK_RATE (50000000 / 16)
#ifndef __ASM_ARCH_VMALLOC_H
#define __ASM_ARCH_VMALLOC_H
#define VMALLOC_END (AT91_IO_VIRT_BASE & PGDIR_MASK)
#endif
include/asm-arm/arch-epxa10db/debug-macro.S deleted 100644 → 0
View file @ 05814450
/* linux/include/asm-arm/arch-epxa10db/debug-macro.S
*
* Debugging macro include header
*
* Copyright (C) 1994-1999 Russell King
* Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <asm/arch/excalibur.h>
#define UART00_TYPE
#include <asm/arch/uart00.h>
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldr \rx, =EXC_UART00_BASE @ physical base address
orrne \rx, \rx, #0xff000000 @ virtual base
orrne \rx, \rx, #0x00f00000
.endm
.macro senduart,rd,rx
str \rd, [\rx, #UART_TD(0)]
.endm
.macro waituart,rd,rx
1001: ldr \rd, [\rx, #UART_TSR(0)]
and \rd, \rd, #UART_TSR_TX_LEVEL_MSK
cmp \rd, #15
beq 1001b
.endm
.macro busyuart,rd,rx
1001: ldr \rd, [\rx, #UART_TSR(0)]
ands \rd, \rd, #UART_TSR_TX_LEVEL_MSK
bne 1001b
.endm
include/asm-arm/arch-epxa10db/entry-macro.S deleted 100644 → 0
View file @ 05814450
/*
* include/asm-arm/arch-epxa10db/entry-macro.S
*
* Low-level IRQ helper macros for epxa10db platform
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <asm/arch/platform.h>
#undef IRQ_MODE /* same name defined in asm/proc/ptrace.h */
#include <asm/arch/int_ctrl00.h>
.macro disable_fiq
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqstat, =INT_ID(IO_ADDRESS(EXC_INT_CTRL00_BASE))
ldr \irqnr,[\irqstat]
cmp \irqnr,#0
subne \irqnr,\irqnr,#1
.endm
include/asm-arm/arch-epxa10db/ether00.h deleted 100644 → 0
View file @ 05814450
#ifndef __ETHER00_H
#define __ETHER00_H
/*
* Register definitions for the Ethernet MAC
*/
/*
* Copyright (c) Altera Corporation 2000.
* All rights reserved.
*/
/*
* Structures for the DMA controller
*/
typedef struct fda_desc
{
struct fda_desc * FDNext;
long FDSystem;
long FDStat;
short FDLength;
short FDCtl;
}FDA_DESC;
typedef struct buf_desc
{
char * BuffData;
short BuffLength;
char BDStat;
char BDCtl;
}BUF_DESC;
/*
* Control masks for the DMA controller
*/
#define FDCTL_BDCOUNT_MSK (0x1F)
#define FDCTL_BDCOUNT_OFST (0)
#define FDCTL_FRMOPT_MSK (0x7C00)
#define FDCTL_FRMOPT_OFST (10)
#define FDCTL_COWNSFD_MSK (0x8000)
#define FDCTL_COWNSFD_OFST (15)
#define BDCTL_RXBDSEQN_MSK (0x7F)
#define BDCTL_RXBDSEQN_OFST (0)
#define BDCTL_COWNSBD_MSK (0x80)
#define BDCTL_COWNSBD_OFST (7)
#define FDNEXT_EOL_MSK (0x1)
#define FDNEXT_EOL_OFST (0)
#define FDNEXT_EOL_POINTER_MSK (0xFFFFFFF0)
#define FDNEXT_EOL_POINTER_OFST (4)
#define ETHER_ARC_SIZE (21)
/*
* Register definitions and masks
*/
#define ETHER_DMA_CTL(base) (ETHER00_TYPE (base + 0x100))
#define ETHER_DMA_CTL_DMBURST_OFST (2)
#define ETHER_DMA_CTL_DMBURST_MSK (0x1FC)
#define ETHER_DMA_CTL_POWRMGMNT_OFST (11)
#define ETHER_DMA_CTL_POWRMGMNT_MSK (0x1000)
#define ETHER_DMA_CTL_TXBIGE_OFST (14)
#define ETHER_DMA_CTL_TXBIGE_MSK (0x4000)
#define ETHER_DMA_CTL_RXBIGE_OFST (15)
#define ETHER_DMA_CTL_RXBIGE_MSK (0x8000)
#define ETHER_DMA_CTL_TXWAKEUP_OFST (16)
#define ETHER_DMA_CTL_TXWAKEUP_MSK (0x10000)
#define ETHER_DMA_CTL_SWINTREQ_OFST (17)
#define ETHER_DMA_CTL_SWINTREQ_MSK (0x20000)
#define ETHER_DMA_CTL_INTMASK_OFST (18)
#define ETHER_DMA_CTL_INTMASK_MSK (0x40000)
#define ETHER_DMA_CTL_M66ENSTAT_OFST (19)
#define ETHER_DMA_CTL_M66ENSTAT_MSK (0x80000)
#define ETHER_DMA_CTL_RMTXINIT_OFST (20)
#define ETHER_DMA_CTL_RMTXINIT_MSK (0x100000)
#define ETHER_DMA_CTL_RMRXINIT_OFST (21)
#define ETHER_DMA_CTL_RMRXINIT_MSK (0x200000)
#define ETHER_DMA_CTL_RXALIGN_OFST (22)
#define ETHER_DMA_CTL_RXALIGN_MSK (0xC00000)
#define ETHER_DMA_CTL_RMSWRQ_OFST (24)
#define ETHER_DMA_CTL_RMSWRQ_MSK (0x1000000)
#define ETHER_DMA_CTL_RMEMBANK_OFST (25)
#define ETHER_DMA_CTL_RMEMBANK_MSK (0x2000000)
#define ETHER_TXFRMPTR(base) (ETHER00_TYPE (base + 0x104))
#define ETHER_TXTHRSH(base) (ETHER00_TYPE (base + 0x308))
#define ETHER_TXPOLLCTR(base) (ETHER00_TYPE (base + 0x30c))
#define ETHER_BLFRMPTR(base) (ETHER00_TYPE (base + 0x110))
#define ETHER_BLFFRMPTR_EOL_OFST (0)
#define ETHER_BLFFRMPTR_EOL_MSK (0x1)
#define ETHER_BLFFRMPTR_ADDRESS_OFST (4)
#define ETHER_BLFFRMPTR_ADDRESS_MSK (0xFFFFFFF0)
#define ETHER_RXFRAGSIZE(base) (ETHER00_TYPE (base + 0x114))
#define ETHER_RXFRAGSIZE_MINFRAG_OFST (2)
#define ETHER_RXFRAGSIZE_MINFRAG_MSK (0xFFC)
#define ETHER_RXFRAGSIZE_ENPACK_OFST (15)
#define ETHER_RXFRAGSIZE_ENPACK_MSK (0x8000)
#define ETHER_INT_EN(base) (ETHER00_TYPE (base + 0x118))
#define ETHER_INT_EN_FDAEXEN_OFST (0)
#define ETHER_INT_EN_FDAEXEN_MSK (0x1)
#define ETHER_INT_EN_BLEXEN_OFST (1)
#define ETHER_INT_EN_BLEXN_MSK (0x2)
#define ETHER_INT_EN_STARGABTEN_OFST (2)
#define ETHER_INT_EN_STARGABTEN_MSK (0x4)
#define ETHER_INT_EN_RTARGABTEN_OFST (3)
#define ETHER_INT_EN_RTARGABTEN_MSK (0x8)
#define ETHER_INT_EN_RMASABTEN_OFST (4)
#define ETHER_INT_EN_RMASABTEN_MSK (0x10)
#define ETHER_INT_EN_SSYSERREN_OFST (5)
#define ETHER_INT_EN_SSYSERREN_MSK (0x20)
#define ETHER_INT_EN_DPARERREN_OFST (6)
#define ETHER_INT_EN_DPARERREN_MSK (0x40)
#define ETHER_INT_EN_EARNOTEN_OFST (7)
#define ETHER_INT_EN_EARNOTEN_MSK (0x80)
#define ETHER_INT_EN_DPARDEN_OFST (8)
#define ETHER_INT_EN_DPARDEN_MSK (0x100)
#define ETHER_INT_EN_DMPARERREN_OFST (9)
#define ETHER_INT_EN_DMPARERREN_MSK (0x200)
#define ETHER_INT_EN_TXCTLCMPEN_OFST (10)
#define ETHER_INT_EN_TXCTLCMPEN_MSK (0x400)
#define ETHER_INT_EN_NRABTEN_OFST (11)
#define ETHER_INT_EN_NRABTEN_MSK (0x800)
#define ETHER_FDA_BAS(base) (ETHER00_TYPE (base + 0x11C))
#define ETHER_FDA_BAS_ADDRESS_OFST (4)
#define ETHER_FDA_BAS_ADDRESS_MSK (0xFFFFFFF0)
#define ETHER_FDA_LIM(base) (ETHER00_TYPE (base + 0x120))
#define ETHER_FDA_LIM_COUNT_OFST (4)
#define ETHER_FDA_LIM_COUNT_MSK (0xFFF0)
#define ETHER_INT_SRC(base) (ETHER00_TYPE (base + 0x124))
#define ETHER_INT_SRC_INTMACTX_OFST (0)
#define ETHER_INT_SRC_INTMACTX_MSK (0x1)
#define ETHER_INT_SRC_INTMACRX_OFST (1)
#define ETHER_INT_SRC_INTMACRX_MSK (0x2)
#define ETHER_INT_SRC_INTSBUS_OFST (2)
#define ETHER_INT_SRC_INTSBUS_MSK (0x4)
#define ETHER_INT_SRC_INTFDAEX_OFST (3)
#define ETHER_INT_SRC_INTFDAEX_MSK (0x8)
#define ETHER_INT_SRC_INTBLEX_OFST (4)
#define ETHER_INT_SRC_INTBLEX_MSK (0x10)
#define ETHER_INT_SRC_SWINT_OFST (5)
#define ETHER_INT_SRC_SWINT_MSK (0x20)
#define ETHER_INT_SRC_INTEARNOT_OFST (6)
#define ETHER_INT_SRC_INTEARNOT_MSK (0x40)
#define ETHER_INT_SRC_DMPARERR_OFST (7)
#define ETHER_INT_SRC_DMPARERR_MSK (0x80)
#define ETHER_INT_SRC_INTEXBD_OFST (8)
#define ETHER_INT_SRC_INTEXBD_MSK (0x100)
#define ETHER_INT_SRC_INTTXCTLCMP_OFST (9)
#define ETHER_INT_SRC_INTTXCTLCMP_MSK (0x200)
#define ETHER_INT_SRC_INTNRABT_OFST (10)
#define ETHER_INT_SRC_INTNRABT_MSK (0x400)
#define ETHER_INT_SRC_FDAEX_OFST (11)
#define ETHER_INT_SRC_FDAEX_MSK (0x800)
#define ETHER_INT_SRC_BLEX_OFST (12)
#define ETHER_INT_SRC_BLEX_MSK (0x1000)
#define ETHER_INT_SRC_DMPARERRSTAT_OFST (13)
#define ETHER_INT_SRC_DMPARERRSTAT_MSK (0x2000)
#define ETHER_INT_SRC_NRABT_OFST (14)
#define ETHER_INT_SRC_NRABT_MSK (0x4000)
#define ETHER_INT_SRC_INTLINK_OFST (15)
#define ETHER_INT_SRC_INTLINK_MSK (0x8000)
#define ETHER_INT_SRC_INTEXDEFER_OFST (16)
#define ETHER_INT_SRC_INTEXDEFER_MSK (0x10000)
#define ETHER_INT_SRC_INTRMON_OFST (17)
#define ETHER_INT_SRC_INTRMON_MSK (0x20000)
#define ETHER_INT_SRC_IRQ_MSK (0x83FF)
#define ETHER_PAUSECNT(base) (ETHER00_TYPE (base + 0x40))
#define ETHER_PAUSECNT_COUNT_OFST (0)
#define ETHER_PAUSECNT_COUNT_MSK (0xFFFF)
#define ETHER_REMPAUCNT(base) (ETHER00_TYPE (base + 0x44))
#define ETHER_REMPAUCNT_COUNT_OFST (0)
#define ETHER_REMPAUCNT_COUNT_MSK (0xFFFF)
#define ETHER_TXCONFRMSTAT(base) (ETHER00_TYPE (base + 0x348))
#define ETHER_TXCONFRMSTAT_TS_STAT_VALUE_OFST (0)
#define ETHER_TXCONFRMSTAT_TS_STAT_VALUE_MSK (0x3FFFFF)
#define ETHER_MAC_CTL(base) (ETHER00_TYPE (base + 0))
#define ETHER_MAC_CTL_HALTREQ_OFST (0)
#define ETHER_MAC_CTL_HALTREQ_MSK (0x1)
#define ETHER_MAC_CTL_HALTIMM_OFST (1)
#define ETHER_MAC_CTL_HALTIMM_MSK (0x2)
#define ETHER_MAC_CTL_RESET_OFST (2)
#define ETHER_MAC_CTL_RESET_MSK (0x4)
#define ETHER_MAC_CTL_FULLDUP_OFST (3)
#define ETHER_MAC_CTL_FULLDUP_MSK (0x8)
#define ETHER_MAC_CTL_MACLOOP_OFST (4)
#define ETHER_MAC_CTL_MACLOOP_MSK (0x10)
#define ETHER_MAC_CTL_CONN_OFST (5)
#define ETHER_MAC_CTL_CONN_MSK (0x60)
#define ETHER_MAC_CTL_LOOP10_OFST (7)
#define ETHER_MAC_CTL_LOOP10_MSK (0x80)
#define ETHER_MAC_CTL_LNKCHG_OFST (8)
#define ETHER_MAC_CTL_LNKCHG_MSK (0x100)
#define ETHER_MAC_CTL_MISSROLL_OFST (10)
#define ETHER_MAC_CTL_MISSROLL_MSK (0x400)
#define ETHER_MAC_CTL_ENMISSROLL_OFST (13)
#define ETHER_MAC_CTL_ENMISSROLL_MSK (0x2000)
#define ETHER_MAC_CTL_LINK10_OFST (15)
#define ETHER_MAC_CTL_LINK10_MSK (0x8000)
#define ETHER_ARC_CTL(base) (ETHER00_TYPE (base + 0x4))
#define ETHER_ARC_CTL_STATIONACC_OFST (0)
#define ETHER_ARC_CTL_STATIONACC_MSK (0x1)
#define ETHER_ARC_CTL_GROUPACC_OFST (1)
#define ETHER_ARC_CTL_GROUPACC_MSK (0x2)
#define ETHER_ARC_CTL_BROADACC_OFST (2)
#define ETHER_ARC_CTL_BROADACC_MSK (0x4)
#define ETHER_ARC_CTL_NEGARC_OFST (3)
#define ETHER_ARC_CTL_NEGARC_MSK (0x8)
#define ETHER_ARC_CTL_COMPEN_OFST (4)
#define ETHER_ARC_CTL_COMPEN_MSK (0x10)
#define ETHER_TX_CTL(base) (ETHER00_TYPE (base + 0x8))
#define ETHER_TX_CTL_TXEN_OFST (0)
#define ETHER_TX_CTL_TXEN_MSK (0x1)
#define ETHER_TX_CTL_TXHALT_OFST (1)
#define ETHER_TX_CTL_TXHALT_MSK (0x2)
#define ETHER_TX_CTL_NOPAD_OFST (2)
#define ETHER_TX_CTL_NOPAD_MSK (0x4)
#define ETHER_TX_CTL_NOCRC_OFST (3)
#define ETHER_TX_CTL_NOCRC_MSK (0x8)
#define ETHER_TX_CTL_FBACK_OFST (4)
#define ETHER_TX_CTL_FBACK_MSK (0x10)
#define ETHER_TX_CTL_NOEXDEF_OFST (5)
#define ETHER_TX_CTL_NOEXDEF_MSK (0x20)
#define ETHER_TX_CTL_SDPAUSE_OFST (6)
#define ETHER_TX_CTL_SDPAUSE_MSK (0x40)
#define ETHER_TX_CTL_MII10_OFST (7)
#define ETHER_TX_CTL_MII10_MSK (0x80)
#define ETHER_TX_CTL_ENUNDER_OFST (8)
#define ETHER_TX_CTL_ENUNDER_MSK (0x100)
#define ETHER_TX_CTL_ENEXDEFER_OFST (9)
#define ETHER_TX_CTL_ENEXDEFER_MSK (0x200)
#define ETHER_TX_CTL_ENLCARR_OFST (10)
#define ETHER_TX_CTL_ENLCARR_MSK (0x400)
#define ETHER_TX_CTL_ENEXCOLL_OFST (11)
#define ETHER_TX_CTL_ENEXCOLL_MSK (0x800)
#define ETHER_TX_CTL_ENLATECOLL_OFST (12)
#define ETHER_TX_CTL_ENLATECOLL_MSK (0x1000)
#define ETHER_TX_CTL_ENTXPAR_OFST (13)
#define ETHER_TX_CTL_ENTXPAR_MSK (0x2000)
#define ETHER_TX_CTL_ENCOMP_OFST (14)
#define ETHER_TX_CTL_ENCOMP_MSK (0x4000)
#define ETHER_TX_STAT(base) (ETHER00_TYPE (base + 0xc))
#define ETHER_TX_STAT_TXCOLL_OFST (0)
#define ETHER_TX_STAT_TXCOLL_MSK (0xF)
#define ETHER_TX_STAT_EXCOLL_OFST (4)
#define ETHER_TX_STAT_EXCOLL_MSK (0x10)
#define ETHER_TX_STAT_TXDEFER_OFST (5)
#define ETHER_TX_STAT_TXDEFER_MSK (0x20)
#define ETHER_TX_STAT_PAUSED_OFST (6)
#define ETHER_TX_STAT_PAUSED_MSK (0x40)
#define ETHER_TX_STAT_INTTX_OFST (7)
#define ETHER_TX_STAT_INTTX_MSK (0x80)
#define ETHER_TX_STAT_UNDER_OFST (8)
#define ETHER_TX_STAT_UNDER_MSK (0x100)
#define ETHER_TX_STAT_EXDEFER_OFST (9)
#define ETHER_TX_STAT_EXDEFER_MSK (0x200)
#define ETHER_TX_STAT_LCARR_OFST (10)
#define ETHER_TX_STAT_LCARR_MSK (0x400)
#define ETHER_TX_STAT_TX10STAT_OFST (11)
#define ETHER_TX_STAT_TX10STAT_MSK (0x800)
#define ETHER_TX_STAT_LATECOLL_OFST (12)
#define ETHER_TX_STAT_LATECOLL_MSK (0x1000)
#define ETHER_TX_STAT_TXPAR_OFST (13)
#define ETHER_TX_STAT_TXPAR_MSK (0x2000)
#define ETHER_TX_STAT_COMP_OFST (14)
#define ETHER_TX_STAT_COMP_MSK (0x4000)
#define ETHER_TX_STAT_TXHALTED_OFST (15)
#define ETHER_TX_STAT_TXHALTED_MSK (0x8000)
#define ETHER_TX_STAT_SQERR_OFST (16)
#define ETHER_TX_STAT_SQERR_MSK (0x10000)
#define ETHER_TX_STAT_TXMCAST_OFST (17)
#define ETHER_TX_STAT_TXMCAST_MSK (0x20000)
#define ETHER_TX_STAT_TXBCAST_OFST (18)
#define ETHER_TX_STAT_TXBCAST_MSK (0x40000)
#define ETHER_TX_STAT_VLAN_OFST (19)
#define ETHER_TX_STAT_VLAN_MSK (0x80000)
#define ETHER_TX_STAT_MACC_OFST (20)
#define ETHER_TX_STAT_MACC_MSK (0x100000)
#define ETHER_TX_STAT_TXPAUSE_OFST (21)
#define ETHER_TX_STAT_TXPAUSE_MSK (0x200000)
#define ETHER_RX_CTL(base) (ETHER00_TYPE (base + 0x10))
#define ETHER_RX_CTL_RXEN_OFST (0)
#define ETHER_RX_CTL_RXEN_MSK (0x1)
#define ETHER_RX_CTL_RXHALT_OFST (1)
#define ETHER_RX_CTL_RXHALT_MSK (0x2)
#define ETHER_RX_CTL_LONGEN_OFST (2)
#define ETHER_RX_CTL_LONGEN_MSK (0x4)
#define ETHER_RX_CTL_SHORTEN_OFST (3)
#define ETHER_RX_CTL_SHORTEN_MSK (0x8)
#define ETHER_RX_CTL_STRIPCRC_OFST (4)
#define ETHER_RX_CTL_STRIPCRC_MSK (0x10)
#define ETHER_RX_CTL_PASSCTL_OFST (5)
#define ETHER_RX_CTL_PASSCTL_MSK (0x20)
#define ETHER_RX_CTL_IGNORECRC_OFST (6)
#define ETHER_RX_CTL_IGNORECRC_MSK (0x40)
#define ETHER_RX_CTL_ENALIGN_OFST (8)
#define ETHER_RX_CTL_ENALIGN_MSK (0x100)
#define ETHER_RX_CTL_ENCRCERR_OFST (9)
#define ETHER_RX_CTL_ENCRCERR_MSK (0x200)
#define ETHER_RX_CTL_ENOVER_OFST (10)
#define ETHER_RX_CTL_ENOVER_MSK (0x400)
#define ETHER_RX_CTL_ENLONGERR_OFST (11)
#define ETHER_RX_CTL_ENLONGERR_MSK (0x800)
#define ETHER_RX_CTL_ENRXPAR_OFST (13)
#define ETHER_RX_CTL_ENRXPAR_MSK (0x2000)
#define ETHER_RX_CTL_ENGOOD_OFST (14)
#define ETHER_RX_CTL_ENGOOD_MSK (0x4000)
#define ETHER_RX_STAT(base) (ETHER00_TYPE (base + 0x14))
#define ETHER_RX_STAT_LENERR_OFST (4)
#define ETHER_RX_STAT_LENERR_MSK (0x10)
#define ETHER_RX_STAT_CTLRECD_OFST (5)
#define ETHER_RX_STAT_CTLRECD_MSK (0x20)
#define ETHER_RX_STAT_INTRX_OFST (6)
#define ETHER_RX_STAT_INTRX_MSK (0x40)
#define ETHER_RX_STAT_RX10STAT_OFST (7)
#define ETHER_RX_STAT_RX10STAT_MSK (0x80)
#define ETHER_RX_STAT_ALIGNERR_OFST (8)
#define ETHER_RX_STAT_ALIGNERR_MSK (0x100)
#define ETHER_RX_STAT_CRCERR_OFST (9)
#define ETHER_RX_STAT_CRCERR_MSK (0x200)
#define ETHER_RX_STAT_OVERFLOW_OFST (10)
#define ETHER_RX_STAT_OVERFLOW_MSK (0x400)
#define ETHER_RX_STAT_LONGERR_OFST (11)
#define ETHER_RX_STAT_LONGERR_MSK (0x800)
#define ETHER_RX_STAT_RXPAR_OFST (13)
#define ETHER_RX_STAT_RXPAR_MSK (0x2000)
#define ETHER_RX_STAT_GOOD_OFST (14)
#define ETHER_RX_STAT_GOOD_MSK (0x4000)
#define ETHER_RX_STAT_RXHALTED_OFST (15)
#define ETHER_RX_STAT_RXHALTED_MSK (0x8000)
#define ETHER_RX_STAT_RXMCAST_OFST (17)
#define ETHER_RX_STAT_RXMCAST_MSK (0x10000)
#define ETHER_RX_STAT_RXBCAST_OFST (18)
#define ETHER_RX_STAT_RXBCAST_MSK (0x20000)
#define ETHER_RX_STAT_RXVLAN_OFST (19)
#define ETHER_RX_STAT_RXVLAN_MSK (0x40000)
#define ETHER_RX_STAT_RXPAUSE_OFST (20)
#define ETHER_RX_STAT_RXPAUSE_MSK (0x80000)
#define ETHER_RX_STAT_ARCSTATUS_OFST (21)
#define ETHER_RX_STAT_ARCSTATUS_MSK (0xF00000)
#define ETHER_RX_STAT_ARCENT_OFST (25)
#define ETHER_RX_STAT_ARCENT_MSK (0x1F000000)
#define ETHER_MD_DATA(base) (ETHER00_TYPE (base + 0x18))
#define ETHER_MD_CA(base) (ETHER00_TYPE (base + 0x1c))
#define ETHER_MD_CA_ADDR_OFST (0)
#define ETHER_MD_CA_ADDR_MSK (0x1F)
#define ETHER_MD_CA_PHY_OFST (5)
#define ETHER_MD_CA_PHY_MSK (0x3E0)
#define ETHER_MD_CA_WR_OFST (10)
#define ETHER_MD_CA_WR_MSK (0x400)
#define ETHER_MD_CA_BUSY_OFST (11)
#define ETHER_MD_CA_BUSY_MSK (0x800)
#define ETHER_MD_CA_PRESUPP_OFST (12)
#define ETHER_MD_CA_PRESUPP_MSK (0x1000)
#define ETHER_ARC_ADR(base) (ETHER00_TYPE (base + 0x160))
#define ETHER_ARC_ADR_ARC_LOC_OFST (2)
#define ETHER_ARC_ADR_ARC_LOC_MSK (0xFFC)
#define ETHER_ARC_DATA(base) (ETHER00_TYPE (base + 0x364))
#define ETHER_ARC_ENA(base) (ETHER00_TYPE (base + 0x28))
#define ETHER_ARC_ENA_MSK (0x1FFFFF)
#define ETHER_PROM_CTL(base) (ETHER00_TYPE (base + 0x2c))
#define ETHER_PROM_CTL_PROM_ADDR_OFST (0)
#define ETHER_PROM_CTL_PROM_ADDR_MSK (0x3F)
#define ETHER_PROM_CTL_OPCODE_OFST (13)
#define ETHER_PROM_CTL_OPCODE_MSK (0x6000)
#define ETHER_PROM_CTL_OPCODE_READ_MSK (0x4000)
#define ETHER_PROM_CTL_OPCODE_WRITE_MSK (0x2000)
#define ETHER_PROM_CTL_OPCODE_ERASE_MSK (0x6000)
#define ETHER_PROM_CTL_ENABLE_MSK (0x0030)
#define ETHER_PROM_CTL_DISABLE_MSK (0x0000)
#define ETHER_PROM_CTL_BUSY_OFST (15)
#define ETHER_PROM_CTL_BUSY_MSK (0x8000)
#define ETHER_PROM_DATA(base) (ETHER00_TYPE (base + 0x30))
#define ETHER_MISS_CNT(base) (ETHER00_TYPE (base + 0x3c))
#define ETHER_MISS_CNT_COUNT_OFST (0)
#define ETHER_MISS_CNT_COUNT_MSK (0xFFFF)
#define ETHER_CNTDATA(base) (ETHER00_TYPE (base + 0x80))
#define ETHER_CNTACC(base) (ETHER00_TYPE (base + 0x84))
#define ETHER_CNTACC_ADDR_OFST (0)
#define ETHER_CNTACC_ADDR_MSK (0xFF)
#define ETHER_CNTACC_WRRDN_OFST (8)
#define ETHER_CNTACC_WRRDN_MSK (0x100)
#define ETHER_CNTACC_CLEAR_OFST (9)
#define ETHER_CNTACC_CLEAR_MSK (0x200)
#define ETHER_TXRMINTEN(base) (ETHER00_TYPE (base + 0x88))
#define ETHER_TXRMINTEN_MSK (0x3FFFFFFF)
#define ETHER_RXRMINTEN(base) (ETHER00_TYPE (base + 0x8C))
#define ETHER_RXRMINTEN_MSK (0xFFFFFF)
/*
* RMON Registers
*/
#define RMON_COLLISION0 0x0
#define RMON_COLLISION1 0x1
#define RMON_COLLISION2 0x2
#define RMON_COLLISION3 0x3
#define RMON_COLLISION4 0x4
#define RMON_COLLISION5 0x5
#define RMON_COLLISION6 0x6
#define RMON_COLLISION7 0x7
#define RMON_COLLISION8 0x8
#define RMON_COLLISION9 0x9
#define RMON_COLLISION10 0xa
#define RMON_COLLISION11 0xb
#define RMON_COLLISION12 0xc
#define RMON_COLLISION13 0xd
#define RMON_COLLISION14 0xe
#define RMON_COLLISION15 0xf
#define RMON_COLLISION16 0x10
#define RMON_FRAMES_WITH_DEFERRED_XMISSIONS 0x11
#define RMON_LATE_COLLISIONS 0x12
#define RMON_FRAMES_LOST_DUE_TO_MAC_XMIT 0x13
#define RMON_CARRIER_SENSE_ERRORS 0x14
#define RMON_FRAMES_WITH_EXCESSIVE_DEFERAL 0x15
#define RMON_UNICAST_FRAMES_TRANSMITTED_OK 0x16
#define RMON_MULTICAST_FRAMES_XMITTED_OK 0x17
#define RMON_BROADCAST_FRAMES_XMITTED_OK 0x18
#define RMON_SQE_TEST_ERRORS 0x19
#define RMON_PAUSE_MACCTRL_FRAMES_XMITTED 0x1A
#define RMON_MACCTRL_FRAMES_XMITTED 0x1B
#define RMON_VLAN_FRAMES_XMITTED 0x1C
#define RMON_OCTETS_XMITTED_OK 0x1D
#define RMON_OCTETS_XMITTED_OK_HI 0x1E
#define RMON_RX_PACKET_SIZES0 0x40
#define RMON_RX_PACKET_SIZES1 0x41
#define RMON_RX_PACKET_SIZES2 0x42
#define RMON_RX_PACKET_SIZES3 0x43
#define RMON_RX_PACKET_SIZES4 0x44
#define RMON_RX_PACKET_SIZES5 0x45
#define RMON_RX_PACKET_SIZES6 0x46
#define RMON_RX_PACKET_SIZES7 0x47
#define RMON_FRAME_CHECK_SEQUENCE_ERRORS 0x48
#define RMON_ALIGNMENT_ERRORS 0x49
#define RMON_FRAGMENTS 0x4A
#define RMON_JABBERS 0x4B
#define RMON_FRAMES_LOST_TO_INTMACRCVERR 0x4C
#define RMON_UNICAST_FRAMES_RCVD_OK 0x4D
#define RMON_MULTICAST_FRAMES_RCVD_OK 0x4E
#define RMON_BROADCAST_FRAMES_RCVD_OK 0x4F
#define RMON_IN_RANGE_LENGTH_ERRORS 0x50
#define RMON_OUT_OF_RANGE_LENGTH_ERRORS 0x51
#define RMON_VLAN_FRAMES_RCVD 0x52
#define RMON_PAUSE_MAC_CTRL_FRAMES_RCVD 0x53
#define RMON_MAC_CTRL_FRAMES_RCVD 0x54
#define RMON_OCTETS_RCVD_OK 0x55
#define RMON_OCTETS_RCVD_OK_HI 0x56
#define RMON_OCTETS_RCVD_OTHER 0x57
#define RMON_OCTETS_RCVD_OTHER_HI 0x58
#endif /* __ETHER00_H */
include/asm-arm/arch-epxa10db/excalibur.h deleted 100644 → 0
View file @ 05814450
/* megafunction wizard: %ARM-Based Excalibur%
GENERATION: STANDARD
VERSION: WM1.0
MODULE: ARM-Based Excalibur
PROJECT: excalibur
============================================================
File Name: v:\embedded\linux\bootldr\excalibur.h
Megafunction Name(s): ARM-Based Excalibur
============================================================
************************************************************
THIS IS A WIZARD-GENERATED FILE. DO NOT EDIT THIS FILE!
************************************************************/
#ifndef EXCALIBUR_H_INCLUDED
#define EXCALIBUR_H_INCLUDED
#define EXC_DEFINE_PROCESSOR_LITTLE_ENDIAN
#define EXC_DEFINE_BOOT_FROM_FLASH
#define EXC_INPUT_CLK_FREQUENCY (50000000)
#define EXC_AHB1_CLK_FREQUENCY (150000000)
#define EXC_AHB2_CLK_FREQUENCY (75000000)
#define EXC_SDRAM_CLK_FREQUENCY (75000000)
/* Registers Block */
#define EXC_REGISTERS_BASE (0x7fffc000)
#define EXC_MODE_CTRL00_BASE (EXC_REGISTERS_BASE + 0x000)
#define EXC_IO_CTRL00_BASE (EXC_REGISTERS_BASE + 0x040)
#define EXC_MMAP00_BASE (EXC_REGISTERS_BASE + 0x080)
#define EXC_PLD_CONFIG00_BASE (EXC_REGISTERS_BASE + 0x140)
#define EXC_TIMER00_BASE (EXC_REGISTERS_BASE + 0x200)
#define EXC_INT_CTRL00_BASE (EXC_REGISTERS_BASE + 0xc00)
#define EXC_CLOCK_CTRL00_BASE (EXC_REGISTERS_BASE + 0x300)
#define EXC_WATCHDOG00_BASE (EXC_REGISTERS_BASE + 0xa00)
#define EXC_UART00_BASE (EXC_REGISTERS_BASE + 0x280)
#define EXC_EBI00_BASE (EXC_REGISTERS_BASE + 0x380)
#define EXC_SDRAM00_BASE (EXC_REGISTERS_BASE + 0x400)
#define EXC_AHB12_BRIDGE_CTRL00_BASE (EXC_REGISTERS_BASE + 0x800)
#define EXC_PLD_STRIPE_BRIDGE_CTRL00_BASE (EXC_REGISTERS_BASE + 0x100)
#define EXC_STRIPE_PLD_BRIDGE_CTRL00_BASE (EXC_REGISTERS_BASE + 0x100)
#define EXC_REGISTERS_SIZE (0x00004000)
/* EBI Block(s) */
#define EXC_EBI_BLOCK0_BASE (0x40000000)
#define EXC_EBI_BLOCK0_SIZE (0x00400000)
#define EXC_EBI_BLOCK0_WIDTH (8)
#define EXC_EBI_BLOCK0_NON_CACHEABLE
#define EXC_EBI_BLOCK1_BASE (0x40400000)
#define EXC_EBI_BLOCK1_SIZE (0x00400000)
#define EXC_EBI_BLOCK1_WIDTH (16)
#define EXC_EBI_BLOCK1_NON_CACHEABLE
#define EXC_EBI_BLOCK2_BASE (0x40800000)
#define EXC_EBI_BLOCK2_SIZE (0x00400000)
#define EXC_EBI_BLOCK2_WIDTH (16)
#define EXC_EBI_BLOCK2_NON_CACHEABLE
#define EXC_EBI_BLOCK3_BASE (0x40c00000)
#define EXC_EBI_BLOCK3_SIZE (0x00400000)
#define EXC_EBI_BLOCK3_WIDTH (16)
#define EXC_EBI_BLOCK3_NON_CACHEABLE
/* SDRAM Block(s) */
#define EXC_SDRAM_BLOCK0_BASE (0x00000000)
#define EXC_SDRAM_BLOCK0_SIZE (0x04000000)
#define EXC_SDRAM_BLOCK0_WIDTH (32)
#define EXC_SDRAM_BLOCK1_BASE (0x04000000)
#define EXC_SDRAM_BLOCK1_SIZE (0x04000000)
#define EXC_SDRAM_BLOCK1_WIDTH (32)
/* Single Port SRAM Block(s) */
#define EXC_SPSRAM_BLOCK0_BASE (0x08000000)
#define EXC_SPSRAM_BLOCK0_SIZE (0x00020000)
#define EXC_SPSRAM_BLOCK1_BASE (0x08020000)
#define EXC_SPSRAM_BLOCK1_SIZE (0x00020000)
/* PLD Block(s) */
#define EXC_PLD_BLOCK0_BASE (0x80000000)
#define EXC_PLD_BLOCK0_SIZE (0x00004000)
#define EXC_PLD_BLOCK0_NON_CACHEABLE
#define EXC_PLD_BLOCK1_BASE (0xf000000)
#define EXC_PLD_BLOCK1_SIZE (0x00004000)
#define EXC_PLD_BLOCK1_NON_CACHEABLE
#define EXC_PLD_BLOCK2_BASE (0x80008000)
#define EXC_PLD_BLOCK2_SIZE (0x00004000)
#define EXC_PLD_BLOCK2_NON_CACHEABLE
#define EXC_PLD_BLOCK3_BASE (0x8000c000)
#define EXC_PLD_BLOCK3_SIZE (0x00004000)
#define EXC_PLD_BLOCK3_NON_CACHEABLE
#endif
include/asm-arm/arch-epxa10db/hardware.h deleted 100644 → 0
View file @ 05814450
/*
* linux/include/asm-arm/arch-epxa10/hardware.h
*
* This file contains the hardware definitions of the Integrator.
*
* Copyright (C) 1999 ARM Limited.
* Copyright (C) 2001 Altera Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARCH_HARDWARE_H
#define __ASM_ARCH_HARDWARE_H
#include <asm/arch/platform.h>
/*
* Where in virtual memory the IO devices (timers, system controllers
* and so on)
*/
#define IO_BASE 0xf0000000 // VA of IO
#define IO_SIZE 0x10000000 // How much?
#define IO_START EXC_REGISTERS_BASE // PA of IO
/* macro to get at IO space when running virtually */
#define IO_ADDRESS(x) ((x) | 0xf0000000)
#define FLASH_VBASE 0xFE000000
#define FLASH_SIZE 0x01000000
#define FLASH_START EXC_EBI_BLOCK0_BASE
#define FLASH_VADDR(x) ((x)|0xFE000000)
/*
* Similar to above, but for PCI addresses (memory, IO, Config and the
* V3 chip itself). WARNING: this has to mirror definitions in platform.h
*/
#if 0
#define PCI_MEMORY_VADDR 0xe8000000
#define PCI_CONFIG_VADDR 0xec000000
#define PCI_V3_VADDR 0xed000000
#define PCI_IO_VADDR 0xee000000
#define PCIO_BASE PCI_IO_VADDR
#define PCIMEM_BASE PCI_MEMORY_VADDR
#define pcibios_assign_all_busses() 1
#define PCIBIOS_MIN_IO 0x6000
#define PCIBIOS_MIN_MEM 0x00100000
#endif
#endif
include/asm-arm/arch-epxa10db/int_ctrl00.h deleted 100644 → 0
View file @ 05814450
/*
*
* This file contains the register definitions for the Excalibur
* Timer TIMER00.
*
* Copyright (C) 2001 Altera Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __INT_CTRL00_H
#define __INT_CTRL00_H
#define INT_MS(base_addr) (INT_CTRL00_TYPE (base_addr + 0x00 ))
#define INT_MS_FC_MSK (0x10000)
#define INT_MS_FC_OFST (16)
#define INT_MS_M1_MSK (0x8000)
#define INT_MS_M1_OFST (15)
#define INT_MS_M0_MSK (0x4000)
#define INT_MS_M0_OFST (14)
#define INT_MS_AE_MSK (0x2000)
#define INT_MS_AE_OFST (13)
#define INT_MS_PE_MSK (0x1000)
#define INT_MS_PE_OFST (12)
#define INT_MS_EE_MSK (0x0800)
#define INT_MS_EE_OFST (11)
#define INT_MS_PS_MSK (0x0400)
#define INT_MS_PS_OFST (10)
#define INT_MS_T1_MSK (0x0200)
#define INT_MS_T1_OFST (9)
#define INT_MS_T0_MSK (0x0100)
#define INT_MS_T0_OFST (8)
#define INT_MS_UA_MSK (0x0080)
#define INT_MS_UA_OFST (7)
#define INT_MS_IP_MSK (0x0040)
#define INT_MS_IP_OFST (6)
#define INT_MS_P5_MSK (0x0020)
#define INT_MS_P5_OFST (5)
#define INT_MS_P4_MSK (0x0010)
#define INT_MS_P4_OFST (4)
#define INT_MS_P3_MSK (0x0008)
#define INT_MS_P3_OFST (3)
#define INT_MS_P2_MSK (0x0004)
#define INT_MS_P2_OFST (2)
#define INT_MS_P1_MSK (0x0002)
#define INT_MS_P1_OFST (1)
#define INT_MS_P0_MSK (0x0001)
#define INT_MS_P0_OFST (0)
#define INT_MC(base_addr) (INT_CTRL00_TYPE (base_addr + 0x04 ))
#define INT_MC_FC_MSK (0x10000)
#define INT_MC_FC_OFST (16)
#define INT_MC_M1_MSK (0x8000)
#define INT_MC_M1_OFST (15)
#define INT_MC_M0_MSK (0x4000)
#define INT_MC_M0_OFST (14)
#define INT_MC_AE_MSK (0x2000)
#define INT_MC_AE_OFST (13)
#define INT_MC_PE_MSK (0x1000)
#define INT_MC_PE_OFST (12)
#define INT_MC_EE_MSK (0x0800)
#define INT_MC_EE_OFST (11)
#define INT_MC_PS_MSK (0x0400)
#define INT_MC_PS_OFST (10)
#define INT_MC_T1_MSK (0x0200)
#define INT_MC_T1_OFST (9)
#define INT_MC_T0_MSK (0x0100)
#define INT_MC_T0_OFST (8)
#define INT_MC_UA_MSK (0x0080)
#define INT_MC_UA_OFST (7)
#define INT_MC_IP_MSK (0x0040)
#define INT_MC_IP_OFST (6)
#define INT_MC_P5_MSK (0x0020)
#define INT_MC_P5_OFST (5)
#define INT_MC_P4_MSK (0x0010)
#define INT_MC_P4_OFST (4)
#define INT_MC_P3_MSK (0x0008)
#define INT_MC_P3_OFST (3)
#define INT_MC_P2_MSK (0x0004)
#define INT_MC_P2_OFST (2)
#define INT_MC_P1_MSK (0x0002)
#define INT_MC_P1_OFST (1)
#define INT_MC_P0_MSK (0x0001)
#define INT_MC_P0_OFST (0)
#define INT_SS(base_addr) (INT_CTRL00_TYPE (base_addr + 0x08 ))
#define INT_SS_FC_SSK (0x8000)
#define INT_SS_FC_OFST (15)
#define INT_SS_M1_SSK (0x8000)
#define INT_SS_M1_OFST (15)
#define INT_SS_M0_SSK (0x4000)
#define INT_SS_M0_OFST (14)
#define INT_SS_AE_SSK (0x2000)
#define INT_SS_AE_OFST (13)
#define INT_SS_PE_SSK (0x1000)
#define INT_SS_PE_OFST (12)
#define INT_SS_EE_SSK (0x0800)
#define INT_SS_EE_OFST (11)
#define INT_SS_PS_SSK (0x0400)
#define INT_SS_PS_OFST (10)
#define INT_SS_T1_SSK (0x0200)
#define INT_SS_T1_OFST (9)
#define INT_SS_T0_SSK (0x0100)
#define INT_SS_T0_OFST (8)
#define INT_SS_UA_SSK (0x0080)
#define INT_SS_UA_OFST (7)
#define INT_SS_IP_SSK (0x0040)
#define INT_SS_IP_OFST (6)
#define INT_SS_P5_SSK (0x0020)
#define INT_SS_P5_OFST (5)
#define INT_SS_P4_SSK (0x0010)
#define INT_SS_P4_OFST (4)
#define INT_SS_P3_SSK (0x0008)
#define INT_SS_P3_OFST (3)
#define INT_SS_P2_SSK (0x0004)
#define INT_SS_P2_OFST (2)
#define INT_SS_P1_SSK (0x0002)
#define INT_SS_P1_OFST (1)
#define INT_SS_P0_SSK (0x0001)
#define INT_SS_P0_OFST (0)
#define INT_RS(base_addr) (INT_CTRL00_TYPE (base_addr + 0x0C ))
#define INT_RS_FC_RSK (0x10000)
#define INT_RS_FC_OFST (16)
#define INT_RS_M1_RSK (0x8000)
#define INT_RS_M1_OFST (15)
#define INT_RS_M0_RSK (0x4000)
#define INT_RS_M0_OFST (14)
#define INT_RS_AE_RSK (0x2000)
#define INT_RS_AE_OFST (13)
#define INT_RS_PE_RSK (0x1000)
#define INT_RS_PE_OFST (12)
#define INT_RS_EE_RSK (0x0800)
#define INT_RS_EE_OFST (11)
#define INT_RS_PS_RSK (0x0400)
#define INT_RS_PS_OFST (10)
#define INT_RS_T1_RSK (0x0200)
#define INT_RS_T1_OFST (9)
#define INT_RS_T0_RSK (0x0100)
#define INT_RS_T0_OFST (8)
#define INT_RS_UA_RSK (0x0080)
#define INT_RS_UA_OFST (7)
#define INT_RS_IP_RSK (0x0040)
#define INT_RS_IP_OFST (6)
#define INT_RS_P5_RSK (0x0020)
#define INT_RS_P5_OFST (5)
#define INT_RS_P4_RSK (0x0010)
#define INT_RS_P4_OFST (4)
#define INT_RS_P3_RSK (0x0008)
#define INT_RS_P3_OFST (3)
#define INT_RS_P2_RSK (0x0004)
#define INT_RS_P2_OFST (2)
#define INT_RS_P1_RSK (0x0002)
#define INT_RS_P1_OFST (1)
#define INT_RS_P0_RSK (0x0001)
#define INT_RS_P0_OFST (0)
#define INT_ID(base_addr) (INT_CTRL00_TYPE (base_addr + 0x10 ))
#define INT_ID_ID_MSK (0x3F)
#define INT_ID_ID_OFST (0)
#define INT_PLD_PRIORITY(base_addr) (INT_CTRL00_TYPE (base_addr + 0x14 ))
#define INT_PLD_PRIORITY_PRI_MSK (0x3F)
#define INT_PLD_PRIORITY_PRI_OFST (0)
#define INT_PLD_PRIORITY_GA_MSK (0x40)
#define INT_PLD_PRIORITY_GA_OFST (6)
#define INT_MODE(base_addr) (INT_CTRL00_TYPE (base_addr + 0x18 ))
#define INT_MODE_MODE_MSK (0x3)
#define INT_MODE_MODE_OFST (0)
#define INT_PRIORITY_P0(base_addr) (INT_CTRL00_TYPE (base_addr + 0x80 ))
#define INT_PRIORITY_P0_PRI_MSK (0x3F)
#define INT_PRIORITY_P0_PRI_OFST (0)
#define INT_PRIORITY_P0_FQ_MSK (0x40)
#define INT_PRIORITY_P0_FQ_OFST (6)
#define INT_PRIORITY_P1(base_addr) (INT_CTRL00_TYPE (base_addr + 0x84 ))
#define INT_PRIORITY_P1_PRI_MSK (0x3F)
#define INT_PRIORITY_P1_PRI_OFST (0)
#define INT_PRIORITY_P1_FQ_MSK (0x40)
#define INT_PRIORITY_P1_FQ_OFST (6)
#define INT_PRIORITY_P2(base_addr) (INT_CTRL00_TYPE (base_addr + 0x88 ))
#define INT_PRIORITY_P2_PRI_MSK (0x3F)
#define INT_PRIORITY_P2_PRI_OFST (0)
#define INT_PRIORITY_P2_FQ_MSK (0x40)
#define INT_PRIORITY_P2_FQ_OFST (6)
#define INT_PRIORITY_P3(base_addr) (INT_CTRL00_TYPE (base_addr + 0x8C ))
#define INT_PRIORITY_P3_PRI_MSK (0x3F)
#define INT_PRIORITY_P3_PRI_OFST (0)
#define INT_PRIORITY_P3_FQ_MSK (0x40)
#define INT_PRIORITY_P3_FQ_OFST (6)
#define INT_PRIORITY_P4(base_addr) (INT_CTRL00_TYPE (base_addr + 0x90 ))
#define INT_PRIORITY_P4_PRI_MSK (0x3F)
#define INT_PRIORITY_P4_PRI_OFST (0)
#define INT_PRIORITY_P4_FQ_MSK (0x40)
#define INT_PRIORITY_P4_FQ_OFST (6)
#define INT_PRIORITY_P5(base_addr) (INT_CTRL00_TYPE (base_addr + 0x94 ))
#define INT_PRIORITY_P5_PRI_MSK (0x3F)
#define INT_PRIORITY_P5_PRI_OFST (0)
#define INT_PRIORITY_P5_FQ_MSK (0x40)
#define INT_PRIORITY_P5_FQ_OFST (6)
#define INT_PRIORITY_IP(base_addr) (INT_CTRL00_TYPE (base_addr + 0x94 ))
#define INT_PRIORITY_IP_PRI_MSK (0x3F)
#define INT_PRIORITY_IP_PRI_OFST (0)
#define INT_PRIORITY_IP_FQ_MSK (0x40)
#define INT_PRIORITY_IP_FQ_OFST (6)
#define INT_PRIORITY_UA(base_addr) (INT_CTRL00_TYPE (base_addr + 0x9C ))
#define INT_PRIORITY_UA_PRI_MSK (0x3F)
#define INT_PRIORITY_UA_PRI_OFST (0)
#define INT_PRIORITY_UA_FQ_MSK (0x40)
#define INT_PRIORITY_UA_FQ_OFST (6)
#define INT_PRIORITY_T0(base_addr) (INT_CTRL00_TYPE (base_addr + 0xA0 ))
#define INT_PRIORITY_T0_PRI_MSK (0x3F)
#define INT_PRIORITY_T0_PRI_OFST (0)
#define INT_PRIORITY_T0_FQ_MSK (0x40)
#define INT_PRIORITY_T0_FQ_OFST (6)
#define INT_PRIORITY_T1(base_addr) (INT_CTRL00_TYPE (base_addr + 0xA4 ))
#define INT_PRIORITY_T1_PRI_MSK (0x3F)
#define INT_PRIORITY_T1_PRI_OFST (0)
#define INT_PRIORITY_T1_FQ_MSK (0x40)
#define INT_PRIORITY_T1_FQ_OFST (6)
#define INT_PRIORITY_PS(base_addr) (INT_CTRL00_TYPE (base_addr + 0xA8 ))
#define INT_PRIORITY_PS_PRI_MSK (0x3F)
#define INT_PRIORITY_PS_PRI_OFST (0)
#define INT_PRIORITY_PS_FQ_MSK (0x40)
#define INT_PRIORITY_PS_FQ_OFST (6)
#define INT_PRIORITY_EE(base_addr) (INT_CTRL00_TYPE (base_addr + 0xAC ))
#define INT_PRIORITY_EE_PRI_MSK (0x3F)
#define INT_PRIORITY_EE_PRI_OFST (0)
#define INT_PRIORITY_EE_FQ_MSK (0x40)
#define INT_PRIORITY_EE_FQ_OFST (6)
#define INT_PRIORITY_PE(base_addr) (INT_CTRL00_TYPE (base_addr + 0xB0 ))
#define INT_PRIORITY_PE_PRI_MSK (0x3F)
#define INT_PRIORITY_PE_PRI_OFST (0)
#define INT_PRIORITY_PE_FQ_MSK (0x40)
#define INT_PRIORITY_PE_FQ_OFST (6)
#define INT_PRIORITY_AE(base_addr) (INT_CTRL00_TYPE (base_addr + 0xB4 ))
#define INT_PRIORITY_AE_PRI_MSK (0x3F)
#define INT_PRIORITY_AE_PRI_OFST (0)
#define INT_PRIORITY_AE_FQ_MSK (0x40)
#define INT_PRIORITY_AE_FQ_OFST (6)
#define INT_PRIORITY_M0(base_addr) (INT_CTRL00_TYPE (base_addr + 0xB8 ))
#define INT_PRIORITY_M0_PRI_MSK (0x3F)
#define INT_PRIORITY_M0_PRI_OFST (0)
#define INT_PRIORITY_M0_FQ_MSK (0x40)
#define INT_PRIORITY_M0_FQ_OFST (6)
#define INT_PRIORITY_M1(base_addr) (INT_CTRL00_TYPE (base_addr + 0xBC ))
#define INT_PRIORITY_M1_PRI_MSK (0x3F)
#define INT_PRIORITY_M1_PRI_OFST (0)
#define INT_PRIORITY_M1_FQ_MSK (0x40)
#define INT_PRIORITY_M1_FQ_OFST (6)
#define INT_PRIORITY_FC(base_addr) (INT_CTRL00_TYPE (base_addr + 0xC0 ))
#define INT_PRIORITY_FC_PRI_MSK (0x3F)
#define INT_PRIORITY_FC_PRI_OFST (0)
#define INT_PRIORITY_FC_FQ_MSK (0x40)
#define INT_PRIORITY_FC_FQ_OFST (6)
#endif /* __INT_CTRL00_H */
include/asm-arm/arch-epxa10db/irqs.h deleted 100644 → 0
View file @ 05814450
/*
* linux/include/asm-arm/arch-camelot/irqs.h
*
* Copyright (C) 2001 Altera Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/* Use the Excalibur chip definitions */
#define INT_CTRL00_TYPE
#include "asm/arch/int_ctrl00.h"
#define IRQ_PLD0 INT_MS_P0_OFST
#define IRQ_PLD1 INT_MS_P1_OFST
#define IRQ_PLD2 INT_MS_P2_OFST
#define IRQ_PLD3 INT_MS_P3_OFST
#define IRQ_PLD4 INT_MS_P4_OFST
#define IRQ_PLD5 INT_MS_P5_OFST
#define IRQ_EXT INT_MS_IP_OFST
#define IRQ_UART INT_MS_UA_OFST
#define IRQ_TIMER0 INT_MS_T0_OFST
#define IRQ_TIMER1 INT_MS_T1_OFST
#define IRQ_PLL INT_MS_PLL_OFST
#define IRQ_EBI INT_MS_EBI_OFST
#define IRQ_STRIPE_BRIDGE INT_MS_PLL_OFST
#define IRQ_AHB_BRIDGE INT_MS_PLL_OFST
#define IRQ_COMMRX INT_MS_CR_OFST
#define IRQ_COMMTX INT_MS_CT_OFST
#define IRQ_FAST_COMM INT_MS_FC_OFST
#define NR_IRQS (INT_MS_FC_OFST + 1)
include/asm-arm/arch-epxa10db/mode_ctrl00.h deleted 100644 → 0
View file @ 05814450
#ifndef __MODE_CTRL00_H
#define __MODE_CTRL00_H
/*
* Register definitions for the reset and mode control
*/
/*
* Copyright (C) 2001 Altera Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define BOOT_CR(BASE_ADDR) (MODE_CTRL00_TYPE (BASE_ADDR ))
#define BOOT_CR_BF_MSK (0x1)
#define BOOT_CR_BF_OFST (0)
#define BOOT_CR_HM_MSK (0x2)
#define BOOT_CR_HM_OFST (1)
#define BOOT_CR_RE_MSK (0x4)
#define BOOT_CR_RE_OFST (2)
#define RESET_SR(BASE_ADDR) (MODE_CTRL00_TYPE (BASE_ADDR + 0x4 ))
#define RESET_SR_WR_MSK (0x1)
#define RESET_SR_WR_OFST (0)
#define RESET_SR_CR_MSK (0x2)
#define RESET_SR_CR_OFST (1)
#define RESET_SR_JT_MSK (0x4)
#define RESET_SR_JT_OFST (2)
#define RESET_SR_ER_MSK (0x8)
#define RESET_SR_ER_OFST (3)
#define ID_CODE(BASE_ADDR) (MODE_CTRL00_TYPE (BASE_ADDR + 0x08 ))
#define SRAM0_SR(BASE_ADDR) (MODE_CTRL00_TYPE (BASE_ADDR + 0x20 ))
#define SRAM0_SR_SIZE_MSK (0xFFFFF000)
#define SRAM0_SR_SIZE_OFST (12)
#define SRAM1_SR(BASE_ADDR) (MODE_CTRL00_TYPE (BASE_ADDR + 0x24 ))
#define SRAM1_SR_SIZE_MSK (0xFFFFF000)
#define SRAM1_SR_SIZE_OFST (12)
#define DPSRAM0_SR(BASE_ADDR) (MODE_CTRL00_TYPE (BASE_ADDR + 0x30 ))
#define DPSRAM0_SR_MODE_MSK (0xF)
#define DPSRAM0_SR_MODE_OFST (0)
#define DPSRAM0_SR_GLBL_MSK (0x30)
#define DPSRAM0_SR_SIZE_MSK (0xFFFFF000)
#define DPSRAM0_SR_SIZE_OFST (12)
#define DPSRAM0_LCR(BASE_ADDR) (MODE_CTRL00_TYPE (BASE_ADDR + 0x34 ))
#define DPSRAM0_LCR_LCKADDR_MSK (0x1FFE0)
#define DPSRAM0_LCR_LCKADDR_OFST (4)
#define DPSRAM1_SR(BASE_ADDR) (MODE_CTRL00_TYPE (BASE_ADDR + 0x38 ))
#define DPSRAM1_SR_MODE_MSK (0xF)
#define DPSRAM1_SR_MODE_OFST (0)
#define DPSRAM1_SR_GLBL_MSK (0x30)
#define DPSRAM1_SR_GLBL_OFST (4)
#define DPSRAM1_SR_SIZE_MSK (0xFFFFF000)
#define DPSRAM1_SR_SIZE_OFST (12)
#define DPSRAM1_LCR(BASE_ADDR) (MODE_CTRL00_TYPE (BASE_ADDR + 0x3C ))
#define DPSRAM1_LCR_LCKADDR_MSK (0x1FFE0)
#define DPSRAM1_LCR_LCKADDR_OFST (4)
#endif /* __MODE_CTRL00_H */
include/asm-arm/arch-epxa10db/platform.h deleted 100644 → 0
View file @ 05814450
#ifndef PLATFORM_H
#define PLATFORM_H
#include "excalibur.h"
#define MAXIRQNUM 15
#endif
include/asm-arm/arch-epxa10db/pld_conf00.h deleted 100644 → 0
View file @ 05814450
#ifndef __PLD_CONF00_H
#define __PLD_CONF00_H
/*
* Register definitions for the PLD Configuration Logic
*/
/*
*
* This file contains the register definitions for the Excalibur
* Interrupt controller INT_CTRL00.
*
* Copyright (C) 2001 Altera Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define CONFIG_CONTROL(BASE_ADDR) (PLD_CONF00_TYPE (BASE_ADDR))
#define CONFIG_CONTROL_LK_MSK (0x1)
#define CONFIG_CONTROL_LK_OFST (0)
#define CONFIG_CONTROL_CO_MSK (0x2)
#define CONFIG_CONTROL_CO_OFST (1)
#define CONFIG_CONTROL_B_MSK (0x4)
#define CONFIG_CONTROL_B_OFST (2)
#define CONFIG_CONTROL_PC_MSK (0x8)
#define CONFIG_CONTROL_PC_OFST (3)
#define CONFIG_CONTROL_E_MSK (0x10)
#define CONFIG_CONTROL_E_OFST (4)
#define CONFIG_CONTROL_ES_MSK (0xE0)
#define CONFIG_CONTROL_ES_OFST (5)
#define CONFIG_CONTROL_ES_0_MSK (0x20)
#define CONFIG_CONTROL_ES_1_MSK (0x40)
#define CONFIG_CONTROL_ES_2_MSK (0x80)
#define CONFIG_CONTROL_CLOCK(BASE_ADDR) (PLD_CONF00_TYPE (BASE_ADDR + 0x4 ))
#define CONFIG_CONTROL_CLOCK_RATIO_MSK (0xFFFF)
#define CONFIG_CONTROL_CLOCK_RATIO_OFST (0)
#define CONFIG_CONTROL_DATA(BASE_ADDR) (PLD_CONF00_TYPE (BASE_ADDR + 0x8 ))
#define CONFIG_CONTROL_DATA_MSK (0xFFFFFFFF)
#define CONFIG_CONTROL_DATA_OFST (0)
#define CONFIG_UNLOCK(BASE_ADDR) (PLD_CONF00_TYPE (BASE_ADDR + 0xC ))
#define CONFIG_UNLOCK_MSK (0xFFFFFFFF)
#define CONFIG_UNLOCK_OFST (0)
#define CONFIG_UNLOCK_MAGIC (0x554E4C4B)
#endif /* __PLD_CONF00_H */
include/asm-arm/arch-epxa10db/tdkphy.h deleted 100644 → 0
View file @ 05814450
/*
* linux/drivers/tdkphy.h
*
* Copyright (C) 2001 Altera Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __TDKPHY_H
#define __TDKPHY_H
/*
* Register definitions for the TDK 78Q2120 PHY
* which is on the Camelot board
*/
/*
* Copyright (c) Altera Corporation 2000.
* All rights reserved.
*/
#define PHY_CONTROL (0)
#define PHY_CONTROL_COLT_MSK (0x80)
#define PHY_CONTROL_COLT_OFST (7)
#define PHY_CONTROL_DUPLEX_MSK (0x100)
#define PHY_CONTROL_DUPLEX_OFST (8)
#define PHY_CONTROL_RANEG_MSK (0x200)
#define PHY_CONTROL_RANEG_OFST (9)
#define PHY_CONTROL_ISO_MSK (0x400)
#define PHY_CONTROL_ISO_OFST (10)
#define PHY_CONTROL_PWRDN_MSK (0x800)
#define PHY_CONTROL_PWRDN_OFST (11)
#define PHY_CONTROL_ANEGEN_MSK (0x1000)
#define PHY_CONTROL_ANEGEN_OFST (12)
#define PHY_CONTROL_SPEEDSL_MSK (0x2000)
#define PHY_CONTROL_SPEEDSL_OFST (13)
#define PHY_CONTROL_LOOPBK_MSK (0x4000)
#define PHY_CONTROL_LOOPBK_OFST (14)
#define PHY_CONTROL_RESET_MSK (0x8000)
#define PHY_CONTROL_RESET_OFST (15)
#define PHY_STATUS (1)
#define PHY_STATUS_ETXD_MSK (0x1)
#define PHY_STATUS_EXTD_OFST (0)
#define PHY_STATUS_JAB_MSK (0x2)
#define PHY_STATUS_JAB_OFST (1)
#define PHY_STATUS_LINK_MSK (0x4)
#define PHY_STATUS_LINK_OFST (2)
#define PHY_STATUS_ANEGA_MSK (0x8)
#define PHY_STATUS_ANEGA_OFST (3)
#define PHY_STATUS_RFAULT_MSK (0x10)
#define PHY_STATUS_RFAULT_OFST (4)
#define PHY_STATUS_ANEGC_MSK (0x20)
#define PHY_STATUS_ANEGC_OFST (5)
#define PHY_STATUS_10T_H_MSK (0x800)
#define PHY_STATUS_10T_H_OFST (11)
#define PHY_STATUS_10T_F_MSK (0x1000)
#define PHY_STATUS_10T_F_OFST (12)
#define PHY_STATUS_100_X_H_MSK (0x2000)
#define PHY_STATUS_100_X_H_OFST (13)
#define PHY_STATUS_100_X_F_MSK (0x4000)
#define PHY_STATUS_100_X_F_OFST (14)
#define PHY_STATUS_100T4_MSK (0x8000)
#define PHY_STATUS_100T4_OFST (15)
#define PHY_ID1 (2)
#define PHY_ID1_OUI_MSK (0xFFFF)
#define PHY_ID1_OUI_OFST (0)
#define PHY_ID2 (3)
#define PHY_ID2_RN_MSK (0xF)
#define PHY_ID2_RN_OFST (0)
#define PHY_ID2_MN_MSK (0x3F0)
#define PHY_ID2_MN_OFST (4)
#define PHY_ID2_OUI_MSK (0xFC00)
#define PHY_ID2_OUI_OFST (10)
#define PHY_AUTO_NEG_ADVERTISEMENT (4)
#define PHY_AUTO_NEG_ADVERTISEMENT_SELECTOR_MSK (0x1F)
#define PHY_AUTO_NEG_ADVERTISEMENT_SELECTOR_OFST (0)
#define PHY_AUTO_NEG_ADVERTISEMENT_A0_MSK (0x20)
#define PHY_AUTO_NEG_ADVERTISEMENT_A0_OFST (5)
#define PHY_AUTO_NEG_ADVERTISEMENT_A1_MSK (0x40)
#define PHY_AUTO_NEG_ADVERTISEMENT_A1_OFST (6)
#define PHY_AUTO_NEG_ADVERTISEMENT_A2_MSK (0x80)
#define PHY_AUTO_NEG_ADVERTISEMENT_A2_OFST (7)
#define PHY_AUTO_NEG_ADVERTISEMENT_A3_MSK (0x100)
#define PHY_AUTO_NEG_ADVERTISEMENT_A3_OFST (8)
#define PHY_AUTO_NEG_ADVERTISEMENT_A4_MSK (0x200)
#define PHY_AUTO_NEG_ADVERTISEMENT_A4_OFST (9)
#define PHY_AUTO_NEG_ADVERTISEMENT_TAF_MSK (0x1FE0)
#define PHY_AUTO_NEG_ADVERTISEMENT_TAF_OFST (5)
#define PHY_AUTO_NEG_ADVERTISEMENT_RF_MSK (0x2000)
#define PHY_AUTO_NEG_ADVERTISEMENT_RF_OFST (13)
#define PHY_AUTO_NEG_ADVERTISEMENT_RSVD_MSK (0x4000)
#define PHY_AUTO_NEG_ADVERTISEMENT_RVSD_OFST (14)
#define PHY_AUTO_NEG_ADVERTISEMENT_NP_MSK (0x8000)
#define PHY_AUTO_NEG_ADVERTISEMENT_NP_OFST (15)
#define PHY_AUTO_NEG_LINK_PARTNER (5)
#define PHY_AUTO_NEG_LINK_PARTNER_S4_MSK (0x1F)
#define PHY_AUTO_NEG_LINK_PARTNER_S4_OFST (0)
#define PHY_AUTO_NEG_LINK_PARTNER_A7_MSK (0x1FE0)
#define PHY_AUTO_NEG_LINK_PARTNER_A7_OFST (5)
#define PHY_AUTO_NEG_LINK_PARTNER_RF_MSK (0x2000)
#define PHY_AUTO_NEG_LINK_PARTNER_RF_OFST (13)
#define PHY_AUTO_NEG_LINK_PARTNER_ACK_MSK (0x4000)
#define PHY_AUTO_NEG_LINK_PARTNER_ACK_OFST (14)
#define PHY_AUTO_NEG_LINK_PARTNER_NP_MSK (0x8000)
#define PHY_AUTO_NEG_LINK_PARTNER_NP_OFST (15)
#define PHY_AUTO_NEG_EXPANSION (6)
#define PHY_AUTO_NEG_EXPANSION_LPANEGA_MSK (0x1)
#define PHY_AUTO_NEG_EXPANSION_LPANEGA_OFST (0)
#define PHY_AUTO_NEG_EXPANSION_PRX_MSK (0x2)
#define PHY_AUTO_NEG_EXPANSION_PRX_OFST (1)
#define PHY_AUTO_NEG_EXPANSION_NPA_MSK (0x4)
#define PHY_AUTO_NEG_EXPANSION_NPA_OFST (2)
#define PHY_AUTO_NEG_EXPANSION_LPNPA_MSK (0x8)
#define PHY_AUTO_NEG_EXPANSION_LPNPA_OFST (3)
#define PHY_AUTO_NEG_EXPANSION_PDF_MSK (0x10)
#define PHY_AUTO_NEG_EXPANSION_PDF_OFST (4)
#define PHY_VENDOR_SPECIFIC (16)
#define PHY_VENDOR_SPECIFIC_RXCC_MSK (0x1)
#define PHY_VENDOR_SPECIFIC_RXCC_OFST (0)
#define PHY_VENDOR_SPECIFIC_PCSBP_MSK (0x2)
#define PHY_VENDOR_SPECIFIC_PCSBP_OFST (1)
#define PHY_VENDOR_SPECIFIC_RVSPOL_MSK (0x10)
#define PHY_VENDOR_SPECIFIC_RVSPOL_OFST (4)
#define PHY_VENDOR_SPECIFIC_APOL_MSK (0x20)
#define PHY_VENDOR_SPECIFIC_APOL_OFST (5)
#define PHY_VENDOR_SPECIFIC_GPIO0_DIR_MSK (0x40)
#define PHY_VENDOR_SPECIFIC_GPIO0_DIR_OFST (6)
#define PHY_VENDOR_SPECIFIC_GPIO0_DAT_MSK (0x80)
#define PHY_VENDOR_SPECIFIC_GPIO0_DAT_OFST (7)
#define PHY_VENDOR_SPECIFIC_GPIO1_DIR_MSK (0x100)
#define PHY_VENDOR_SPECIFIC_GPIO1_DIR_OFST (8)
#define PHY_VENDOR_SPECIFIC_GPIO1_DAT_MSK (0x200)
#define PHY_VENDOR_SPECIFIC_GPIO1_DAT_OFST (9)
#define PHY_VENDOR_SPECIFIC_10BT_NATURAL_LOOPBACK_DAT_MSK (0x400)
#define PHY_VENDOR_SPECIFIC_10BT_NATURAL_LOOPBACK_DAT_OFST (10)
#define PHY_VENDOR_SPECIFIC_10BT_SQE_TEST_INHIBIT_MSK (0x800)
#define PHY_VENDOR_SPECIFIC_10BT_SQE_TEST_INHIBIT_OFST (11)
#define PHY_VENDOR_SPECIFIC_TXHIM_MSK (0x1000)
#define PHY_VENDOR_SPECIFIC_TXHIM_OFST (12)
#define PHY_VENDOR_SPECIFIC_INT_LEVEL_MSK (0x4000)
#define PHY_VENDOR_SPECIFIC_INT_LEVEL_OFST (14)
#define PHY_VENDOR_SPECIFIC_RPTR_MSK (0x8000)
#define PHY_VENDOR_SPECIFIC_RPTR_OFST (15)
#define PHY_IRQ_CONTROL (17)
#define PHY_IRQ_CONTROL_ANEG_COMP_INT_MSK (0x1)
#define PHY_IRQ_CONTROL_ANEG_COMP_INT_OFST (0)
#define PHY_IRQ_CONTROL_RFAULT_INT_MSK (0x2)
#define PHY_IRQ_CONTROL_RFAULT_INT_OFST (1)
#define PHY_IRQ_CONTROL_LS_CHG_INT_MSK (0x4)
#define PHY_IRQ_CONTROL_LS_CHG_INT_OFST (2)
#define PHY_IRQ_CONTROL_LP_ACK_INT_MSK (0x8)
#define PHY_IRQ_CONTROL_LP_ACK_INT_OFST (3)
#define PHY_IRQ_CONTROL_PDF_INT_MSK (0x10)
#define PHY_IRQ_CONTROL_PDF_INT_OFST (4)
#define PHY_IRQ_CONTROL_PRX_INT_MSK (0x20)
#define PHY_IRQ_CONTROL_PRX_INT_OFST (5)
#define PHY_IRQ_CONTROL_RXER_INT_MSK (0x40)
#define PHY_IRQ_CONTROL_RXER_INT_OFST (6)
#define PHY_IRQ_CONTROL_JABBER_INT_MSK (0x80)
#define PHY_IRQ_CONTROL_JABBER_INT_OFST (7)
#define PHY_IRQ_CONTROL_ANEG_COMP_IE_MSK (0x100)
#define PHY_IRQ_CONTROL_ANEG_COMP_IE_OFST (8)
#define PHY_IRQ_CONTROL_RFAULT_IE_MSK (0x200)
#define PHY_IRQ_CONTROL_RFAULT_IE_OFST (9)
#define PHY_IRQ_CONTROL_LS_CHG_IE_MSK (0x400)
#define PHY_IRQ_CONTROL_LS_CHG_IE_OFST (10)
#define PHY_IRQ_CONTROL_LP_ACK_IE_MSK (0x800)
#define PHY_IRQ_CONTROL_LP_ACK_IE_OFST (11)
#define PHY_IRQ_CONTROL_PDF_IE_MSK (0x1000)
#define PHY_IRQ_CONTROL_PDF_IE_OFST (12)
#define PHY_IRQ_CONTROL_PRX_IE_MSK (0x2000)
#define PHY_IRQ_CONTROL_PRX_IE_OFST (13)
#define PHY_IRQ_CONTROL_RXER_IE_MSK (0x4000)
#define PHY_IRQ_CONTROL_RXER_IE_OFST (14)
#define PHY_IRQ_CONTROL_JABBER_IE_MSK (0x8000)
#define PHY_IRQ_CONTROL_JABBER_IE_OFST (15)
#define PHY_DIAGNOSTIC (18)
#define PHY_DIAGNOSTIC_RX_LOCK_MSK (0x100)
#define PHY_DIAGNOSTIC_RX_LOCK_OFST (8)
#define PHY_DIAGNOSTIC_RX_PASS_MSK (0x200)
#define PHY_DIAGNOSTIC_RX_PASS_OFST (9)
#define PHY_DIAGNOSTIC_RATE_MSK (0x400)
#define PHY_DIAGNOSTIC_RATE_OFST (10)
#define PHY_DIAGNOSTIC_DPLX_MSK (0x800)
#define PHY_DIAGNOSTIC_DPLX_OFST (11)
#define PHY_DIAGNOSTIC_ANEGF_MSK (0x1000)
#define PHY_DIAGNOSTIC_ANEGF_OFST (12)
#endif /* __TDKPHY_H */
include/asm-arm/arch-epxa10db/timer00.h deleted 100644 → 0
View file @ 05814450
/*
*
* This file contains the register definitions for the Excalibur
* Timer TIMER00.
*
* Copyright (C) 2001 Altera Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __TIMER00_H
#define __TIMER00_H
/*
* Register definitions for the timers
*/
#define TIMER0_CR(BASE_ADDR) (TIMER00_TYPE (BASE_ADDR + 0x00 ))
#define TIMER0_CR_B_MSK (0x20)
#define TIMER0_CR_B_OFST (0x5)
#define TIMER0_CR_S_MSK (0x10)
#define TIMER0_CR_S_OFST (0x4)
#define TIMER0_CR_CI_MSK (0x08)
#define TIMER0_CR_CI_OFST (0x3)
#define TIMER0_CR_IE_MSK (0x04)
#define TIMER0_CR_IE_OFST (0x2)
#define TIMER0_CR_MODE_MSK (0x3)
#define TIMER0_CR_MODE_OFST (0)
#define TIMER0_CR_MODE_FREE (0)
#define TIMER0_CR_MODE_ONE (1)
#define TIMER0_CR_MODE_INTVL (2)
#define TIMER0_SR(BASE_ADDR) (TIMER00_TYPE (BASE_ADDR + 0x00 ))
#define TIMER0_SR_B_MSK (0x20)
#define TIMER0_SR_B_OFST (0x5)
#define TIMER0_SR_S_MSK (0x10)
#define TIMER0_SR_S_OFST (0x4)
#define TIMER0_SR_CI_MSK (0x08)
#define TIMER0_SR_CI_OFST (0x3)
#define TIMER0_SR_IE_MSK (0x04)
#define TIMER0_SR_IE_OFST (0x2)
#define TIMER0_SR_MODE_MSK (0x3)
#define TIMER0_SR_MODE_OFST (0)
#define TIMER0_SR_MODE_FREE (0)
#define TIMER0_SR_MODE_ONE (1)
#define TIMER0_SR_MODE_INTVL (2)
#define TIMER0_PRESCALE(BASE_ADDR) (TIMER00_TYPE (BASE_ADDR + 0x010 ))
#define TIMER0_LIMIT(BASE_ADDR) (TIMER00_TYPE (BASE_ADDR + 0x020 ))
#define TIMER0_READ(BASE_ADDR) (TIMER00_TYPE (BASE_ADDR + 0x030 ))
#define TIMER1_CR(BASE_ADDR) (TIMER00_TYPE (BASE_ADDR + 0x40 ))
#define TIMER1_CR_B_MSK (0x20)
#define TIMER1_CR_B_OFST (0x5)
#define TIMER1_CR_S_MSK (0x10)
#define TIMER1_CR_S_OFST (0x4)
#define TIMER1_CR_CI_MSK (0x08)
#define TIMER1_CR_CI_OFST (0x3)
#define TIMER1_CR_IE_MSK (0x04)
#define TIMER1_CR_IE_OFST (0x2)
#define TIMER1_CR_MODE_MSK (0x3)
#define TIMER1_CR_MODE_OFST (0)
#define TIMER1_CR_MODE_FREE (0)
#define TIMER1_CR_MODE_ONE (1)
#define TIMER1_CR_MODE_INTVL (2)
#define TIMER1_SR(BASE_ADDR) (TIMER00_TYPE (BASE_ADDR + 0x40 ))
#define TIMER1_SR_B_MSK (0x20)
#define TIMER1_SR_B_OFST (0x5)
#define TIMER1_SR_S_MSK (0x10)
#define TIMER1_SR_S_OFST (0x4)
#define TIMER1_SR_CI_MSK (0x08)
#define TIMER1_SR_CI_OFST (0x3)
#define TIMER1_SR_IE_MSK (0x04)
#define TIMER1_SR_IE_OFST (0x2)
#define TIMER1_SR_MODE_MSK (0x3)
#define TIMER1_SR_MODE_OFST (0)
#define TIMER1_SR_MODE_FREE (0)
#define TIMER1_SR_MODE_ONE (1)
#define TIMER1_SR_MODE_INTVL (2)
#define TIMER1_PRESCALE(BASE_ADDR) (TIMER00_TYPE (BASE_ADDR + 0x050 ))
#define TIMER1_LIMIT(BASE_ADDR) (TIMER00_TYPE (BASE_ADDR + 0x060 ))
#define TIMER1_READ(BASE_ADDR) (TIMER00_TYPE (BASE_ADDR + 0x070 ))
#endif /* __TIMER00_H */
include/asm-arm/arch-epxa10db/uart00.h deleted 100644 → 0
View file @ 05814450
/* *
* Copyright (C) 2001 Altera Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __UART00_H
#define __UART00_H
/*
* Register definitions for the UART
*/
#define UART_TX_FIFO_SIZE (15)
#define UART_RSR(BASE_ADDR) (UART00_TYPE (BASE_ADDR + 0x00 ))
#define UART_RSR_RX_LEVEL_MSK (0x1f)
#define UART_RSR_RX_LEVEL_OFST (0)
#define UART_RSR_RE_MSK (0x80)
#define UART_RSR_RE_OFST (7)
#define UART_RDS(BASE_ADDR) (UART00_TYPE (BASE_ADDR + 0x04 ))
#define UART_RDS_BI_MSK (0x8)
#define UART_RDS_BI_OFST (4)
#define UART_RDS_FE_MSK (0x4)
#define UART_RDS_FE_OFST (2)
#define UART_RDS_PE_MSK (0x2)
#define UART_RDS_PE_OFST (1)
#define UART_RDS_OE_MSK (0x1)
#define UART_RDS_OE_OFST (0)
#define UART_RD(BASE_ADDR) (UART00_TYPE (BASE_ADDR + 0x08 ))
#define UART_RD_RX_DATA_MSK (0xff)
#define UART_RD_RX_DATA_OFST (0)
#define UART_TSR(BASE_ADDR) (UART00_TYPE (BASE_ADDR + 0x0c ))
#define UART_TSR_TX_LEVEL_MSK (0x1f)
#define UART_TSR_TX_LEVEL_OFST (0)
#define UART_TSR_TXI_MSK (0x80)
#define UART_TSR_TXI_OFST (7)
#define UART_TD(BASE_ADDR) (UART00_TYPE (BASE_ADDR + 0x10 ))
#define UART_TD_TX_DATA_MSK (0xff)
#define UART_TD_TX_DATA_OFST (0)
#define UART_FCR(BASE_ADDR) (UART00_TYPE (BASE_ADDR + 0x14 ))
#define UART_FCR_RX_THR_MSK (0xd0)
#define UART_FCR_RX_THR_OFST (5)
#define UART_FCR_RX_THR_1 (0x00)
#define UART_FCR_RX_THR_2 (0x20)
#define UART_FCR_RX_THR_4 (0x40)
#define UART_FCR_RX_THR_6 (0x60)
#define UART_FCR_RX_THR_8 (0x80)
#define UART_FCR_RX_THR_10 (0xa0)
#define UART_FCR_RX_THR_12 (0xc0)
#define UART_FCR_RX_THR_14 (0xd0)
#define UART_FCR_TX_THR_MSK (0x1c)
#define UART_FCR_TX_THR_OFST (2)
#define UART_FCR_TX_THR_0 (0x00)
#define UART_FCR_TX_THR_2 (0x04)
#define UART_FCR_TX_THR_4 (0x08)
#define UART_FCR_TX_THR_8 (0x0c)
#define UART_FCR_TX_THR_10 (0x10)
#define UART_FCR_TX_THR_12 (0x14)
#define UART_FCR_TX_THR_14 (0x18)
#define UART_FCR_TX_THR_15 (0x1c)
#define UART_FCR_RC_MSK (0x02)
#define UART_FCR_RC_OFST (1)
#define UART_FCR_TC_MSK (0x01)
#define UART_FCR_TC_OFST (0)
#define UART_IES(BASE_ADDR) (UART00_TYPE (BASE_ADDR + 0x18 ))
#define UART_IES_ME_MSK (0x8)
#define UART_IES_ME_OFST (3)
#define UART_IES_TIE_MSK (0x4)
#define UART_IES_TIE_OFST (2)
#define UART_IES_TE_MSK (0x2)
#define UART_IES_TE_OFST (1)
#define UART_IES_RE_MSK (0x1)
#define UART_IES_RE_OFST (0)
#define UART_IEC(BASE_ADDR) (UART00_TYPE (BASE_ADDR + 0x1c ))
#define UART_IEC_ME_MSK (0x8)
#define UART_IEC_ME_OFST (3)
#define UART_IEC_TIE_MSK (0x4)
#define UART_IEC_TIE_OFST (2)
#define UART_IEC_TE_MSK (0x2)
#define UART_IEC_TE_OFST (1)
#define UART_IEC_RE_MSK (0x1)
#define UART_IEC_RE_OFST (0)
#define UART_ISR(BASE_ADDR) (UART00_TYPE (BASE_ADDR + 0x20 ))
#define UART_ISR_MI_MSK (0x8)
#define UART_ISR_MI_OFST (3)
#define UART_ISR_TII_MSK (0x4)
#define UART_ISR_TII_OFST (2)
#define UART_ISR_TI_MSK (0x2)
#define UART_ISR_TI_OFST (1)
#define UART_ISR_RI_MSK (0x1)
#define UART_ISR_RI_OFST (0)
#define UART_IID(BASE_ADDR) (UART00_TYPE (BASE_ADDR + 0x24 ))
#define UART_IID_IID_MSK (0x7)
#define UART_IID_IID_OFST (0)
#define UART_MC(BASE_ADDR) (UART00_TYPE (BASE_ADDR + 0x28 ))
#define UART_MC_OE_MSK (0x40)
#define UART_MC_OE_OFST (6)
#define UART_MC_SP_MSK (0x20)
#define UART_MC_SP_OFST (5)
#define UART_MC_EP_MSK (0x10)
#define UART_MC_EP_OFST (4)
#define UART_MC_PE_MSK (0x08)
#define UART_MC_PE_OFST (3)
#define UART_MC_ST_MSK (0x04)
#define UART_MC_ST_ONE (0x0)
#define UART_MC_ST_TWO (0x04)
#define UART_MC_ST_OFST (2)
#define UART_MC_CLS_MSK (0x03)
#define UART_MC_CLS_OFST (0)
#define UART_MC_CLS_CHARLEN_5 (0)
#define UART_MC_CLS_CHARLEN_6 (1)
#define UART_MC_CLS_CHARLEN_7 (2)
#define UART_MC_CLS_CHARLEN_8 (3)
#define UART_MCR(BASE_ADDR) (UART00_TYPE (BASE_ADDR + 0x2c ))
#define UART_MCR_AC_MSK (0x80)
#define UART_MCR_AC_OFST (7)
#define UART_MCR_AR_MSK (0x40)
#define UART_MCR_AR_OFST (6)
#define UART_MCR_BR_MSK (0x20)
#define UART_MCR_BR_OFST (5)
#define UART_MCR_LB_MSK (0x10)
#define UART_MCR_LB_OFST (4)
#define UART_MCR_DCD_MSK (0x08)
#define UART_MCR_DCD_OFST (3)
#define UART_MCR_RI_MSK (0x04)
#define UART_MCR_RI_OFST (2)
#define UART_MCR_DTR_MSK (0x02)
#define UART_MCR_DTR_OFST (1)
#define UART_MCR_RTS_MSK (0x01)
#define UART_MCR_RTS_OFST (0)
#define UART_MSR(BASE_ADDR) (UART00_TYPE (BASE_ADDR + 0x30 ))
#define UART_MSR_DCD_MSK (0x80)
#define UART_MSR_DCD_OFST (7)
#define UART_MSR_RI_MSK (0x40)
#define UART_MSR_RI_OFST (6)
#define UART_MSR_DSR_MSK (0x20)
#define UART_MSR_DSR_OFST (5)
#define UART_MSR_CTS_MSK (0x10)
#define UART_MSR_CTS_OFST (4)
#define UART_MSR_DDCD_MSK (0x08)
#define UART_MSR_DDCD_OFST (3)
#define UART_MSR_TERI_MSK (0x04)
#define UART_MSR_TERI_OFST (2)
#define UART_MSR_DDSR_MSK (0x02)
#define UART_MSR_DDSR_OFST (1)
#define UART_MSR_DCTS_MSK (0x01)
#define UART_MSR_DCTS_OFST (0)
#define UART_DIV_LO(BASE_ADDR) (UART00_TYPE (BASE_ADDR + 0x34 ))
#define UART_DIV_LO_DIV_MSK (0xff)
#define UART_DIV_LO_DIV_OFST (0)
#define UART_DIV_HI(BASE_ADDR) (UART00_TYPE (BASE_ADDR + 0x38 ))
#define UART_DIV_HI_DIV_MSK (0xff)
#define UART_DIV_HI_DIV_OFST (0)
#endif /* __UART00_H */
include/asm-arm/io.h
View file @ 3995f4c5
......@@ -56,7 +56,12 @@ extern void __raw_readsl(const void __iomem *addr, void *data, int longlen);
/*
* Architecture ioremap implementation.
*
* __ioremap takes CPU physical address.
*
* __ioremap_pfn takes a Page Frame Number and an offset into that page
*/
extern void __iomem * __ioremap_pfn(unsigned long, unsigned long, size_t, unsigned long);
extern void __iomem * __ioremap(unsigned long, size_t, unsigned long);
extern void __iounmap(void __iomem *addr);
......@@ -261,6 +266,7 @@ check_signature(void __iomem *io_addr, const unsigned char *signature,
*
* ioremap takes a PCI memory address, as specified in
* Documentation/IO-mapping.txt.
*
*/
#ifndef __arch_ioremap
#define ioremap(cookie,size) __ioremap(cookie,size,0)
......
include/asm-arm/mach/map.h
View file @ 3995f4c5
......@@ -27,9 +27,6 @@ struct meminfo;
#define MT_ROM 6
#define MT_IXP2000_DEVICE 7
#define __phys_to_pfn(paddr) ((paddr) >> PAGE_SHIFT)
#define __pfn_to_phys(pfn) ((pfn) << PAGE_SHIFT)
extern void create_memmap_holes(struct meminfo *);
extern void memtable_init(struct meminfo *);
extern void iotable_init(struct map_desc *, int);
......
include/asm-arm/memory.h
View file @ 3995f4c5
......@@ -57,6 +57,12 @@
#define __phys_to_virt(x) ((x) - PHYS_OFFSET + PAGE_OFFSET)
#endif
/*
* Convert a physical address to a Page Frame Number and back
*/
#define __phys_to_pfn(paddr) ((paddr) >> PAGE_SHIFT)
#define __pfn_to_phys(pfn) ((pfn) << PAGE_SHIFT)
/*
* The module space lives between the addresses given by TASK_SIZE
* and PAGE_OFFSET - it must be within 32MB of the kernel text.
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7