Merge tag 'for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

Pull power supply and reset updates from Sebastian Reichel:
 "This time there are lots of changes. Quite a few changes to the core,
  lots of driver changes and one change to kobject core (with Ack from
  Greg).

  Summary:

  kobject:
   - Increase number of allowed uevent variables

  power-supply core:
   - Add power-supply type in uevent
   - Cleanup property handling in core
   - Make property and usb_type pointers const
   - Convert core power-supply DT binding to YAML
   - Cleanup HWMON code
   - Add new health status "calibration required"
   - Add new properties for manufacture date and capacity error margin

  battery drivers:
   - new cw2015 battery driver used by pine64 Pinebook Pro laptop
   - axp22: blacklist on Meegopad T02
   - sc27xx: support current/voltage reading
   - max17042: support time-to-empty reading
   - simple-battery: add more battery parameters
   - bq27xxx: convert DT binding document to YAML
   - sbs-battery: add TI BQ20Z65 support, fix technology property,
         convert DT binding to YAML, add option to disable charger
         broadcasts, add new properties: manufacture date, capacity
         error margin, average current, charge current and voltage and
         support calibration required health status
   - misc fixes

  charger drivers:
   - bq25890: cleanup, implement charge type, precharge current and
         input current limiting properties
   - bd70528: use new linear range helper library
   - bd99954: new charger driver
   - mp2629: new charger driver
   - misc fixes

  reboot drivers:
   - oxnas-restart: introduce new driver
   - syscon-reboot: convert DT binding to YAML, add parent syscon device
         support
   - misc fixes"

* tag 'for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (85 commits)
  power: supply: cw2015: Attach OF ID table to the driver
  power: reset: gpio-poweroff: add missing '\n' in dev_err()
  Revert "power: supply: sbs-battery: simplify read_read_string_data"
  Revert "power: supply: sbs-battery: add PEC support"
  dt-bindings: power: sbs-battery: Convert to yaml
  power: supply: sbs-battery: constify power-supply property array
  power: supply: sbs-battery: switch to i2c's probe_new
  power: supply: sbs-battery: switch from of_property_* to device_property_*
  power: supply: sbs-battery: add ability to disable charger broadcasts
  power: supply: sbs-battery: fix idle battery status
  power: supply: sbs-battery: add POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED support
  power: supply: sbs-battery: add MANUFACTURE_DATE support
  power: supply: sbs-battery: add POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT/VOLTAGE_MAX support
  power: supply: sbs-battery: Improve POWER_SUPPLY_PROP_TECHNOLOGY support
  power: supply: sbs-battery: add POWER_SUPPLY_PROP_CURRENT_AVG support
  power: supply: sbs-battery: add PEC support
  power: supply: sbs-battery: simplify read_read_string_data
  power: supply: sbs-battery: add POWER_SUPPLY_PROP_CAPACITY_ERROR_MARGIN support
  power: supply: sbs-battery: Add TI BQ20Z65 support
  power: supply: core: add POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED
  ...

Documentation/ABI/testing/sysfs-class-power

@@ -74,6 +74,21 @@ Description:
 		Access: Read, Write
 		Valid values: 0 - 100 (percent)
 
+What:		/sys/class/power_supply/<supply_name>/capacity_error_margin
+Date:		April 2019
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Battery capacity measurement becomes unreliable without
+		recalibration. This values provides the maximum error
+		margin expected to exist by the fuel gauge in percent.
+		Values close to 0% will be returned after (re-)calibration
+		has happened. Over time the error margin will increase.
+		100% means, that the capacity related values are basically
+		completely useless.
+
+		Access: Read
+		Valid values: 0 - 100 (percent)
+
 What:		/sys/class/power_supply/<supply_name>/capacity_level
 Date:		June 2009
 Contact:	linux-pm@vger.kernel.org
@@ -190,7 +205,7 @@ Description:
 		Valid values: "Unknown", "Good", "Overheat", "Dead",
 			      "Over voltage", "Unspecified failure", "Cold",
 			      "Watchdog timer expire", "Safety timer expire",
-			      "Over current"
+			      "Over current", "Calibration required"
 
 What:		/sys/class/power_supply/<supply_name>/precharge_current
 Date:		June 2017
@@ -665,3 +680,31 @@ Description:
 		Valid values:
 		- 1: enabled
 		- 0: disabled
+
+What:		/sys/class/power_supply/<supply_name>/manufacture_year
+Date:		January 2020
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Reports the year (following Gregorian calendar) when the device has been
+		manufactured.
+
+		Access: Read
+		Valid values: Reported as integer
+
+What:		/sys/class/power_supply/<supply_name>/manufacture_month
+Date:		January 2020
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Reports the month when the device has been manufactured.
+
+		Access: Read
+		Valid values: 1-12
+
+What:		/sys/class/power_supply/<supply_name>/manufacture_day
+Date:		January 2020
+Contact:	linux-pm@vger.kernel.org
+Description:
+		Reports the day of month when the device has been manufactured.
+
+		Access: Read
+		Valid values: 1-31

Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.txt

-SYSCON reboot mode driver
-
-This driver gets reboot mode magic value form reboot-mode driver
-and stores it in a SYSCON mapped register. Then the bootloader
-can read it and take different action according to the magic
-value stored.
-
-This DT node should be represented as a sub-node of a "syscon", "simple-mfd"
-node.
-
-Required properties:
-- compatible: should be "syscon-reboot-mode"
-- offset: offset in the register map for the storage register (in bytes)
-
-Optional property:
-- mask: bits mask of the bits in the register to store the reboot mode magic value,
-  default set to 0xffffffff if missing.
-
-The rest of the properties should follow the generic reboot-mode description
-found in reboot-mode.txt
-
-Example:
-	pmu: pmu@20004000 {
-		compatible = "rockchip,rk3066-pmu", "syscon", "simple-mfd";
-		reg = <0x20004000 0x100>;
-
-		reboot-mode {
-			compatible = "syscon-reboot-mode";
-			offset = <0x40>;
-			mode-normal = <BOOT_NORMAL>;
-			mode-recovery = <BOOT_RECOVERY>;
-			mode-bootloader = <BOOT_FASTBOOT>;
-			mode-loader = <BOOT_BL_DOWNLOAD>;
-		};
-	};

Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.yaml

+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/syscon-reboot-mode.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic SYSCON reboot mode driver
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |
+  This driver gets reboot mode magic value from reboot-mode driver
+  and stores it in a SYSCON mapped register. Then the bootloader
+  can read it and take different action according to the magic
+  value stored. The SYSCON mapped register is retrieved from the
+  parental dt-node plus the offset. So the SYSCON reboot-mode node
+  should be represented as a sub-node of a "syscon", "simple-mfd" node.
+
+properties:
+  compatible:
+    const: syscon-reboot-mode
+
+  mask:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Update only the register bits defined by the mask (32 bit)
+
+  offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Offset in the register map for the mode register (in bytes)
+
+patternProperties:
+  "^mode-.+":
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Vendor-specific mode value written to the mode register
+
+additionalProperties: false
+
+required:
+  - compatible
+  - offset
+
+examples:
+  - |
+    #include <dt-bindings/soc/rockchip,boot-mode.h>
+
+    reboot-mode {
+      compatible = "syscon-reboot-mode";
+      offset = <0x40>;
+      mode-normal = <BOOT_NORMAL>;
+      mode-recovery = <BOOT_RECOVERY>;
+      mode-bootloader = <BOOT_FASTBOOT>;
+      mode-loader = <BOOT_BL_DOWNLOAD>;
+    };
+...

Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml

@@ -12,9 +12,12 @@ maintainers:
 description: |+
   This is a generic reset driver using syscon to map the reset register.
   The reset is generally performed with a write to the reset register
-  defined by the register map pointed by syscon reference plus the offset
-  with the value and mask defined in the reboot node.
-  Default will be little endian mode, 32 bit access only.
+  defined by the SYSCON register map base plus the offset with the value and
+  mask defined in the reboot node. Default will be little endian mode, 32 bit
+  access only. The SYSCON registers map is normally retrieved from the
+  parental dt-node. So the SYSCON reboot node should be represented as a
+  sub-node of a "syscon", "simple-mfd" node. Though the regmap property
+  pointing to the system controller node is also supported.
 
 properties:
   compatible:
@@ -30,7 +33,10 @@ properties:
 
   regmap:
     $ref: /schemas/types.yaml#/definitions/phandle
-    description: Phandle to the register map node.
+    deprecated: true
+    description: |
+      Phandle to the register map node. This property is deprecated in favor of
+      the syscon-reboot node been a child of a system controller node.
 
   value:
     $ref: /schemas/types.yaml#/definitions/uint32
@@ -38,7 +44,6 @@ properties:
 
 required:
   - compatible
-  - regmap
   - offset
 
 additionalProperties: false

Documentation/devicetree/bindings/power/supply/battery.txt

@@ -11,15 +11,21 @@ different type. This prevents unpredictable, potentially harmful,
 behavior should a replacement that changes the battery type occur
 without a corresponding update to the dtb.
 
+Please note that not all charger drivers respect all of the properties.
+
 Required Properties:
  - compatible: Must be "simple-battery"
 
 Optional Properties:
+ - over-voltage-threshold-microvolt: battery over-voltage limit
+ - re-charge-voltage-microvolt: limit to automatically start charging again
  - voltage-min-design-microvolt: drained battery voltage
  - voltage-max-design-microvolt: fully charged battery voltage
  - energy-full-design-microwatt-hours: battery design energy
  - charge-full-design-microamp-hours: battery design capacity
+ - trickle-charge-current-microamp: current for trickle-charge phase
  - precharge-current-microamp: current for pre-charge phase
+ - precharge-upper-limit-microvolt: limit when to change to constant charging
  - charge-term-current-microamp: current for charge termination phase
  - constant-charge-current-max-microamp: maximum constant input current
  - constant-charge-voltage-max-microvolt: maximum constant input voltage

Documentation/devicetree/bindings/power/supply/bq27xxx.txt

-TI BQ27XXX fuel gauge family
-
-Required properties:
-- compatible: contains one of the following:
- * "ti,bq27200" - BQ27200
- * "ti,bq27210" - BQ27210
- * "ti,bq27500" - deprecated, use revision specific property below
- * "ti,bq27510" - deprecated, use revision specific property below
- * "ti,bq27520" - deprecated, use revision specific property below
- * "ti,bq27500-1" - BQ27500/1
- * "ti,bq27510g1" - BQ27510-g1
- * "ti,bq27510g2" - BQ27510-g2
- * "ti,bq27510g3" - BQ27510-g3
- * "ti,bq27520g1" - BQ27520-g1
- * "ti,bq27520g2" - BQ27520-g2
- * "ti,bq27520g3" - BQ27520-g3
- * "ti,bq27520g4" - BQ27520-g4
- * "ti,bq27521" - BQ27521
- * "ti,bq27530" - BQ27530
- * "ti,bq27531" - BQ27531
- * "ti,bq27541" - BQ27541
- * "ti,bq27542" - BQ27542
- * "ti,bq27546" - BQ27546
- * "ti,bq27742" - BQ27742
- * "ti,bq27545" - BQ27545
- * "ti,bq27411" - BQ27411
- * "ti,bq27421" - BQ27421
- * "ti,bq27425" - BQ27425
- * "ti,bq27426" - BQ27426
- * "ti,bq27441" - BQ27441
- * "ti,bq27621" - BQ27621
-- reg: integer, I2C address of the fuel gauge.
-
-Optional properties:
-- monitored-battery: phandle of battery characteristics node
-    The fuel gauge uses the following battery properties:
-    + energy-full-design-microwatt-hours
-    + charge-full-design-microamp-hours
-    + voltage-min-design-microvolt
-  Both or neither of the *-full-design-*-hours properties must be set.
-  See Documentation/devicetree/bindings/power/supply/battery.txt
-
-Example:
-
-	bat: battery {
-		compatible = "simple-battery";
-		voltage-min-design-microvolt = <3200000>;
-		energy-full-design-microwatt-hours = <5290000>;
-		charge-full-design-microamp-hours = <1430000>;
-	};
-
-	bq27510g3: fuel-gauge@55 {
-		compatible = "ti,bq27510g3";
-		reg = <0x55>;
-		monitored-battery = <&bat>;
-	};

Documentation/devicetree/bindings/power/supply/bq27xxx.yaml

+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2020 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/bq27xxx.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: TI BQ27XXX fuel gauge family
+
+maintainers:
+  - Pali Rohár <pali@kernel.org>
+  - Andrew F. Davis <afd@ti.com>
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |
+  Support various Texas Instruments fuel gauge devices that share similar
+  register maps and power supply properties
+
+allOf:
+  - $ref: power-supply.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,bq27200
+      - ti,bq27210
+      - ti,bq27500 # deprecated, use revision specific property below
+      - ti,bq27510 # deprecated, use revision specific property below
+      - ti,bq27520 # deprecated, use revision specific property below
+      - ti,bq27500-1
+      - ti,bq27510g1
+      - ti,bq27510g2
+      - ti,bq27510g3
+      - ti,bq27520g1
+      - ti,bq27520g2
+      - ti,bq27520g3
+      - ti,bq27520g4
+      - ti,bq27521
+      - ti,bq27530
+      - ti,bq27531
+      - ti,bq27541
+      - ti,bq27542
+      - ti,bq27546
+      - ti,bq27742
+      - ti,bq27545
+      - ti,bq27411
+      - ti,bq27421
+      - ti,bq27425
+      - ti,bq27426
+      - ti,bq27441
+      - ti,bq27621
+
+  reg:
+    maxItems: 1
+    description: integer, I2C address of the fuel gauge.
+
+  monitored-battery:
+    description: |
+       phandle of battery characteristics node.
+       The fuel gauge uses the following battery properties:
+       - energy-full-design-microwatt-hours
+       - charge-full-design-microamp-hours
+       - voltage-min-design-microvolt
+       Both or neither of the *-full-design-*-hours properties must be set.
+       See Documentation/devicetree/bindings/power/supply/battery.txt
+
+  power-supplies: true
+
+required:
+  - compatible
+  - reg
+additionalProperties: false
+
+examples:
+  - |
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      bat: battery {
+        compatible = "simple-battery";
+        voltage-min-design-microvolt = <3200000>;
+        energy-full-design-microwatt-hours = <5290000>;
+        charge-full-design-microamp-hours = <1430000>;
+      };
+
+      bq27510g3: fuel-gauge@55 {
+        compatible = "ti,bq27510g3";
+        reg = <0x55>;
+        monitored-battery = <&bat>;
+      };
+    };

Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/cw2015_battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Battery driver for CW2015 shuntless fuel gauge by CellWise.
+
+maintainers:
+  - Tobias Schramm <t.schramm@manjaro.org>
+
+description: |
+  The driver can utilize information from a simple-battery linked via a
+  phandle in monitored-battery. If specified the driver uses the
+  charge-full-design-microamp-hours property of the battery.
+
+properties:
+  compatible:
+    const: cellwise,cw2015
+
+  reg:
+    maxItems: 1
+
+  cellwise,battery-profile:
+    description: |
+      This property specifies characteristics of the battery used. The format
+      of this binary blob is kept secret by CellWise. The only way to obtain
+      it is to mail two batteries to a test facility of CellWise and receive
+      back a test report with the binary blob.
+    allOf:
+      - $ref: /schemas/types.yaml#definitions/uint8-array
+    items:
+      - minItems: 64
+        maxItems: 64
+
+  cellwise,monitor-interval-ms:
+    description:
+      Specifies the interval in milliseconds gauge values are polled at
+    minimum: 250
+
+  power-supplies:
+    description:
+      Specifies supplies used for charging the battery connected to this gauge
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/phandle-array
+      - minItems: 1
+        maxItems: 8 # Should be enough
+
+  monitored-battery:
+    description:
+      Specifies the phandle of a simple-battery connected to this gauge
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cw2015@62 {
+            compatible = "cellwise,cw201x";
+            reg = <0x62>;
+            cellwise,battery-profile = /bits/ 8 <
+                0x17 0x67 0x80 0x73 0x6E 0x6C 0x6B 0x63
+                0x77 0x51 0x5C 0x58 0x50 0x4C 0x48 0x36
+                0x15 0x0C 0x0C 0x19 0x5B 0x7D 0x6F 0x69
+                0x69 0x5B 0x0C 0x29 0x20 0x40 0x52 0x59
+                0x57 0x56 0x54 0x4F 0x3B 0x1F 0x7F 0x17
+                0x06 0x1A 0x30 0x5A 0x85 0x93 0x96 0x2D
+                0x48 0x77 0x9C 0xB3 0x80 0x52 0x94 0xCB
+                0x2F 0x00 0x64 0xA5 0xB5 0x11 0xF0 0x11
+           >;
+           cellwise,monitor-interval-ms = <5000>;
+           monitored-battery = <&bat>;
+           power-supplies = <&mains_charger>, <&usb_charger>;
+       };
+    };
+

Documentation/devicetree/bindings/power/supply/power-supply.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/power-supply.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Power Supply Core Support
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+properties:
+  power-supplies:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      This property is added to a supply in order to list the devices which
+      supply it power, referenced by their phandles.
+
+examples:
+  - |
+    power {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      usb_charger:charger@e {
+        compatible = "some,usb-charger";
+        reg = <0xe>;
+      };
+
+      ac_charger:charger@c {
+        compatible = "some,ac-charger";
+        reg = <0xc>;
+      };
+
+      battery:battery@b {
+        compatible = "some,battery";
+        reg = <0xb>;
+        power-supplies = <&usb_charger>, <&ac_charger>;
+      };
+    };

Documentation/devicetree/bindings/power/supply/power_supply.txt

-Power Supply Core Support
-
-Optional Properties:
- - power-supplies : This property is added to a supply in order to list the
-   devices which supply it power, referenced by their phandles.
-
-Example:
-
-	usb-charger: power@e {
-		compatible = "some,usb-charger";
-		...
-	};
-
-	ac-charger: power@c {
-		compatible = "some,ac-charger";
-		...
-	};
-
-	battery@b {
-		compatible = "some,battery";
-		...
-		power-supplies = <&usb-charger>, <&ac-charger>;
-	};
+This binding has been converted to yaml please see power-supply.yaml in this
+directory.

Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml

+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/rohm,bd99954.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD99954 Battery charger
+
+maintainers:
+  - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+  - Markus Laine <markus.laine@fi.rohmeurope.com>
+  - Mikko Mutanen <mikko.mutanen@fi.rohmeurope.com>
+
+description: |
+  The ROHM BD99954 is a Battery Management LSI for 1-4 cell Lithium-Ion
+  secondary battery intended to be used in space-constraint equipment such
+  as Low profile Notebook PC, Tablets and other applications. BD99954
+  provides a Dual-source Battery Charger, two port BC1.2 detection and a
+  Battery Monitor.
+
+
+properties:
+  compatible:
+    const: rohm,bd99954
+#
+#    The battery charging profile of BD99954.
+#
+#    Curve (1) represents charging current.
+#    Curve (2) represents battery voltage.
+#
+#    The BD99954 data sheet divides charging to three phases.
+#    a) Trickle-charge with constant current (8).
+#    b) pre-charge with constant current (6)
+#    c) fast-charge with:
+#       First a constant current (5) phase (CC)
+#       Then constant voltage (CV) phase (after the battery voltage has reached
+#       target level - until charging current has dropped to termination
+#       level (7)
+#
+#     V ^                                                        ^ I
+#       .                                                        .
+#       .                                                        .
+# (4)- -.- - - - - - - - - - - - - -  +++++++++++++++++++++++++++.
+#       .                            /                           .
+#       .                     ++++++/++ - - - - - - - - - - - - -.- - (5)
+#       .                     +    /  +                          .
+#       .                     +   -   --                         .
+#       .                     +  -     +                         .
+#       .                     +.-      -:                        .
+#       .                    .+         +`                       .
+#       .                  .- +       | `/                       .
+#       .               .."   +          .:                      .
+#       .             -"      +           --                     .
+#       .    (2)  ..."        +       |    :-                    .
+#       .    ...""            +             -:                   .
+# (3)- -.-.""- - - - -+++++++++ - - - - - - -.:- - - - - - - - - .- - (6)
+#       .             +                       `:.                .
+#       .             +               |         -:               .
+#       .             +                           -:             .
+#       .             +                             ..           .
+#       .   (1)       +               |               "+++- - - -.- - (7)
+#       -++++++++++++++- - - - - - - - - - - - - - - - - + - - - .- - (8)
+#       .                                                +       -
+#       -------------------------------------------------+++++++++-->
+#       |             |       |   CC   |      CV         |
+#       | --trickle-- | -pre- | ---------fast----------- |
+#
+#   The charger uses the following battery properties
+# - trickle-charge-current-microamp:
+#     Current used at trickle-charge phase (8 in above chart)
+#     minimum: 64000
+#     maximum: 1024000
+#     multipleOf: 64000
+# - precharge-current-microamp:
+#     Current used at pre-charge phase (6 in above chart)
+#     minimum: 64000
+#     maximum: 1024000
+#     multipleOf: 64000
+# - constant-charge-current-max-microamp
+#     Current used at fast charge constant current phase (5 in above chart)
+#     minimum: 64000
+#     maximum: 1024000
+#     multipleOf: 64000
+# - constant-charge-voltage-max-microvolt
+#     The constant voltage used in fast charging phase (4 in above chart)
+#     minimum: 2560000
+#     maximum: 19200000
+#     multipleOf: 16000
+# - precharge-upper-limit-microvolt
+#     charging mode is changed from trickle charging to pre-charging
+#     when battery voltage exceeds this limit voltage (3 in above chart)
+#     minimum: 2048000
+#     maximum: 19200000
+#     multipleOf: 64000
+# - re-charge-voltage-microvolt
+#     minimum: 2560000
+#     maximum: 19200000
+#     multipleOf: 16000
+#     re-charging is automatically started when battry has been discharging
+#     to the point where the battery voltage drops below this limit
+# - over-voltage-threshold-microvolt
+#     battery is expected to be faulty if battery voltage exceeds this limit.
+#     Charger will then enter to a "battery faulty" -state
+#     minimum: 2560000
+#     maximum: 19200000
+#     multipleOf: 16000
+# - charge-term-current-microamp
+#     minimum: 0
+#     maximum: 1024000
+#     multipleOf: 64000
+#     a charge cycle terminates when the battery voltage is above recharge
+#     threshold, and the current is below this setting (7 in above chart)
+#   See also Documentation/devicetree/bindings/power/supply/battery.txt
+
+  monitored-battery:
+    description:
+      phandle of battery characteristics devicetree node
+
+  rohm,vsys-regulation-microvolt:
+    description: system specific lower limit for system voltage.
+    minimum: 2560000
+    maximum: 19200000
+    multipleOf: 64000
+
+  rohm,vbus-input-current-limit-microamp:
+    description: system specific VBUS input current limit (in microamps).
+    minimum: 32000
+    maximum: 16352000
+    multipleOf: 32000
+
+  rohm,vcc-input-current-limit-microamp:
+    description: system specific VCC/VACP input current limit (in microamps).
+    minimum: 32000
+    maximum: 16352000
+    multipleOf: 32000
+
+required:
+  - compatible
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        charger@9 {
+            compatible = "rohm,bd99954";
+            monitored-battery = <&battery>;
+            reg = <0x9>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <29 8>;
+            rohm,vsys-regulation-microvolt = <8960000>;
+            rohm,vbus-input-current-limit-microamp = <1472000>;
+            rohm,vcc-input-current-limit-microamp = <1472000>;
+        };
+    };

Documentation/devicetree/bindings/power/supply/sbs,sbs-battery.yaml

+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/sbs,sbs-battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SBS compliant battery
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |
+  Battery compatible with the smart battery system specifications
+
+properties:
+
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - ti,bq20z65
+              - ti,bq20z75
+          - enum:
+              - sbs,sbs-battery
+      - items:
+          - const: sbs,sbs-battery
+
+  reg:
+    maxItems: 1
+
+  sbs,i2c-retry-count:
+    description:
+      The number of times to retry I2C transactions on I2C IO failure.
+    default: 0
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+
+  sbs,poll-retry-count:
+    description:
+      The number of times to try looking for new status after an external
+      change notification.
+    default: 0
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+
+  sbs,battery-detect-gpios:
+    description:
+      GPIO which signals battery detection. If this is not supplied, the bus
+      needs to be polled to detect the battery.
+    maxItems: 1
+
+  sbs,disable-charger-broadcasts:
+    description:
+      SBS batteries by default send broadcast messages to SBS compliant chargers to
+      configure max. charge current/voltage. If your hardware does not have an SBS
+      compliant charger it should be disabled via this property to avoid blocking
+      the bus. Also some SBS battery fuel gauges are known to have a buggy multi-
+      master implementation.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        battery@b {
+            compatible = "ti,bq20z75", "sbs,sbs-battery";
+            reg = <0xb>;
+            sbs,i2c-retry-count = <2>;
+            sbs,poll-retry-count = <10>;
+            sbs,battery-detect-gpios = <&gpio 122 GPIO_ACTIVE_HIGH>;
+            sbs,disable-charger-broadcasts;
+       };
+    };

Documentation/devicetree/bindings/power/supply/sbs_sbs-battery.txt

-SBS sbs-battery
-~~~~~~~~~~
-
-Required properties :
- - compatible: "<vendor>,<part-number>", "sbs,sbs-battery" as fallback. The
-     part number compatible string might be used in order to take care of
-     vendor specific registers.
-     Known <vendor>,<part-number>:
-       ti,bq20z75
-
-Optional properties :
- - sbs,i2c-retry-count : The number of times to retry i2c transactions on i2c
-   IO failure.
- - sbs,poll-retry-count : The number of times to try looking for new status
-   after an external change notification.
- - sbs,battery-detect-gpios : The gpio which signals battery detection and
-   a flag specifying its polarity.
-
-Example:
-
-	battery@b {
-		compatible = "ti,bq20z75", "sbs,sbs-battery";
-		reg = <0xb>;
-		sbs,i2c-retry-count = <2>;
-		sbs,poll-retry-count = <10>;
-		sbs,battery-detect-gpios = <&gpio-controller 122 1>;
-	}

Documentation/devicetree/bindings/vendor-prefixes.yaml

@@ -187,6 +187,8 @@ patternProperties:
     description: Cadence Design Systems Inc.
   "^cdtech,.*":
     description: CDTech(H.K.) Electronics Limited
+  "^cellwise,.*":
+    description: CellWise Microelectronics Co., Ltd
   "^ceva,.*":
     description: Ceva, Inc.
   "^checkpoint,.*":

MAINTAINERS

@@ -2190,6 +2190,7 @@ L:	linux-oxnas@groups.io (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/boot/dts/ox8*.dts*
 F:	arch/arm/mach-oxnas/
+F:	drivers/power/reset/oxnas-restart.c
 N:	oxnas
 
 ARM/PALM TREO SUPPORT
@@ -3978,6 +3979,12 @@ F:	arch/powerpc/include/uapi/asm/spu*.h
 F:	arch/powerpc/oprofile/*cell*
 F:	arch/powerpc/platforms/cell/
 
+CELLWISE CW2015 BATTERY DRIVER
+M:	Tobias Schrammm <t.schramm@manjaro.org>
+S:	Maintained
+F:	Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml
+F:	drivers/power/supply/cw2015_battery.c
+
 CEPH COMMON CODE (LIBCEPH)
 M:	Ilya Dryomov <idryomov@gmail.com>
 M:	Jeff Layton <jlayton@kernel.org>

arch/x86/platform/olpc/olpc-xo1-sci.c

@@ -52,7 +52,7 @@ static const char * const lid_wake_mode_names[] = {
 
 static void battery_status_changed(void)
 {
-	struct power_supply *psy = power_supply_get_by_name("olpc-battery");
+	struct power_supply *psy = power_supply_get_by_name("olpc_battery");
 
 	if (psy) {
 		power_supply_changed(psy);
@@ -62,7 +62,7 @@ static void battery_status_changed(void)
 
 static void ac_status_changed(void)
 {
-	struct power_supply *psy = power_supply_get_by_name("olpc-ac");
+	struct power_supply *psy = power_supply_get_by_name("olpc_ac");
 
 	if (psy) {
 		power_supply_changed(psy);

arch/x86/platform/olpc/olpc-xo15-sci.c

@@ -75,7 +75,7 @@ static struct kobj_attribute lid_wake_on_close_attr =
 
 static void battery_status_changed(void)
 {
-	struct power_supply *psy = power_supply_get_by_name("olpc-battery");
+	struct power_supply *psy = power_supply_get_by_name("olpc_battery");
 
 	if (psy) {
 		power_supply_changed(psy);
@@ -85,7 +85,7 @@ static void battery_status_changed(void)
 
 static void ac_status_changed(void)
 {
-	struct power_supply *psy = power_supply_get_by_name("olpc-ac");
+	struct power_supply *psy = power_supply_get_by_name("olpc_ac");
 
 	if (psy) {
 		power_supply_changed(psy);

drivers/platform/olpc/olpc-xo175-ec.c

@@ -410,7 +410,7 @@ static void olpc_xo175_ec_complete(void *arg)
 		dev_dbg(dev, "got event %.2x\n", byte);
 		switch (byte) {
 		case EVENT_AC_CHANGE:
-			psy = power_supply_get_by_name("olpc-ac");
+			psy = power_supply_get_by_name("olpc_ac");
 			if (psy) {
 				power_supply_changed(psy);
 				power_supply_put(psy);
@@ -420,7 +420,7 @@ static void olpc_xo175_ec_complete(void *arg)
 		case EVENT_BATTERY_CRITICAL:
 		case EVENT_BATTERY_SOC_CHANGE:
 		case EVENT_BATTERY_ERROR:
-			psy = power_supply_get_by_name("olpc-battery");
+			psy = power_supply_get_by_name("olpc_battery");
 			if (psy) {
 				power_supply_changed(psy);
 				power_supply_put(psy);

drivers/power/reset/Kconfig

@@ -123,6 +123,13 @@ config POWER_RESET_OCELOT_RESET
 	help
 	  This driver supports restart for Microsemi Ocelot SoC.
 
+config POWER_RESET_OXNAS
+	bool "OXNAS SoC restart driver"
+	depends on ARCH_OXNAS
+	default MACH_OX820
+	help
+	  Restart support for OXNAS/PLXTECH OX820 SoC.
+
 config POWER_RESET_PIIX4_POWEROFF
 	tristate "Intel PIIX4 power-off driver"
 	depends on PCI

drivers/power/reset/Makefile

@@ -12,6 +12,7 @@ obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o
 obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o
 obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
 obj-$(CONFIG_POWER_RESET_MT6323) += mt6323-poweroff.o
+obj-$(CONFIG_POWER_RESET_OXNAS) += oxnas-restart.o
 obj-$(CONFIG_POWER_RESET_QCOM_PON) += qcom-pon.o
 obj-$(CONFIG_POWER_RESET_OCELOT_RESET) += ocelot-reset.o
 obj-$(CONFIG_POWER_RESET_PIIX4_POWEROFF) += piix4-poweroff.o

drivers/power/reset/gpio-poweroff.c

@@ -54,7 +54,7 @@ static int gpio_poweroff_probe(struct platform_device *pdev)
 	/* If a pm_power_off function has already been added, leave it alone */
 	if (pm_power_off != NULL) {
 		dev_err(&pdev->dev,
-			"%s: pm_power_off function already registered",
+			"%s: pm_power_off function already registered\n",
 		       __func__);
 		return -EBUSY;
 	}

drivers/power/reset/ltc2952-poweroff.c

@@ -94,7 +94,6 @@ static enum hrtimer_restart ltc2952_poweroff_timer_wde(struct hrtimer *timer)
 {
 	ktime_t now;
 	int state;
-	unsigned long overruns;
 	struct ltc2952_poweroff *data = to_ltc2952(timer, timer_wde);
 
 	if (data->kernel_panic)
@@ -104,7 +103,7 @@ static enum hrtimer_restart ltc2952_poweroff_timer_wde(struct hrtimer *timer)
 	gpiod_set_value(data->gpio_watchdog, !state);
 
 	now = hrtimer_cb_get_time(timer);
-	overruns = hrtimer_forward(timer, now, data->wde_interval);
+	hrtimer_forward(timer, now, data->wde_interval);
 
 	return HRTIMER_RESTART;
 }

drivers/power/reset/oxnas-restart.c

+// SPDX-License-Identifier: (GPL-2.0)
+/*
+ * oxnas SoC reset driver
+ * based on:
+ * Microsemi MIPS SoC reset driver
+ * and ox820_assert_system_reset() written by Ma Hajun <mahaijuns@gmail.com>
+ *
+ * Copyright (c) 2013 Ma Hajun <mahaijuns@gmail.com>
+ * Copyright (c) 2017 Microsemi Corporation
+ * Copyright (c) 2020 Daniel Golle <daniel@makrotopia.org>
+ */
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/notifier.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/regmap.h>
+
+/* bit numbers of reset control register */
+#define OX820_SYS_CTRL_RST_SCU                0
+#define OX820_SYS_CTRL_RST_COPRO              1
+#define OX820_SYS_CTRL_RST_ARM0               2
+#define OX820_SYS_CTRL_RST_ARM1               3
+#define OX820_SYS_CTRL_RST_USBHS              4
+#define OX820_SYS_CTRL_RST_USBHSPHYA          5
+#define OX820_SYS_CTRL_RST_MACA               6
+#define OX820_SYS_CTRL_RST_MAC                OX820_SYS_CTRL_RST_MACA
+#define OX820_SYS_CTRL_RST_PCIEA              7
+#define OX820_SYS_CTRL_RST_SGDMA              8
+#define OX820_SYS_CTRL_RST_CIPHER             9
+#define OX820_SYS_CTRL_RST_DDR                10
+#define OX820_SYS_CTRL_RST_SATA               11
+#define OX820_SYS_CTRL_RST_SATA_LINK          12
+#define OX820_SYS_CTRL_RST_SATA_PHY           13
+#define OX820_SYS_CTRL_RST_PCIEPHY            14
+#define OX820_SYS_CTRL_RST_STATIC             15
+#define OX820_SYS_CTRL_RST_GPIO               16
+#define OX820_SYS_CTRL_RST_UART1              17
+#define OX820_SYS_CTRL_RST_UART2              18
+#define OX820_SYS_CTRL_RST_MISC               19
+#define OX820_SYS_CTRL_RST_I2S                20
+#define OX820_SYS_CTRL_RST_SD                 21
+#define OX820_SYS_CTRL_RST_MACB               22
+#define OX820_SYS_CTRL_RST_PCIEB              23
+#define OX820_SYS_CTRL_RST_VIDEO              24
+#define OX820_SYS_CTRL_RST_DDR_PHY            25
+#define OX820_SYS_CTRL_RST_USBHSPHYB          26
+#define OX820_SYS_CTRL_RST_USBDEV             27
+#define OX820_SYS_CTRL_RST_ARMDBG             29
+#define OX820_SYS_CTRL_RST_PLLA               30
+#define OX820_SYS_CTRL_RST_PLLB               31
+
+/* bit numbers of clock control register */
+#define OX820_SYS_CTRL_CLK_COPRO              0
+#define OX820_SYS_CTRL_CLK_DMA                1
+#define OX820_SYS_CTRL_CLK_CIPHER             2
+#define OX820_SYS_CTRL_CLK_SD                 3
+#define OX820_SYS_CTRL_CLK_SATA               4
+#define OX820_SYS_CTRL_CLK_I2S                5
+#define OX820_SYS_CTRL_CLK_USBHS              6
+#define OX820_SYS_CTRL_CLK_MACA               7
+#define OX820_SYS_CTRL_CLK_MAC                OX820_SYS_CTRL_CLK_MACA
+#define OX820_SYS_CTRL_CLK_PCIEA              8
+#define OX820_SYS_CTRL_CLK_STATIC             9
+#define OX820_SYS_CTRL_CLK_MACB               10
+#define OX820_SYS_CTRL_CLK_PCIEB              11
+#define OX820_SYS_CTRL_CLK_REF600             12
+#define OX820_SYS_CTRL_CLK_USBDEV             13
+#define OX820_SYS_CTRL_CLK_DDR                14
+#define OX820_SYS_CTRL_CLK_DDRPHY             15
+#define OX820_SYS_CTRL_CLK_DDRCK              16
+
+/* Regmap offsets */
+#define OX820_CLK_SET_REGOFFSET               0x2c
+#define OX820_CLK_CLR_REGOFFSET               0x30
+#define OX820_RST_SET_REGOFFSET               0x34
+#define OX820_RST_CLR_REGOFFSET               0x38
+#define OX820_SECONDARY_SEL_REGOFFSET         0x14
+#define OX820_TERTIARY_SEL_REGOFFSET          0x8c
+#define OX820_QUATERNARY_SEL_REGOFFSET        0x94
+#define OX820_DEBUG_SEL_REGOFFSET             0x9c
+#define OX820_ALTERNATIVE_SEL_REGOFFSET       0xa4
+#define OX820_PULLUP_SEL_REGOFFSET            0xac
+#define OX820_SEC_SECONDARY_SEL_REGOFFSET     0x100014
+#define OX820_SEC_TERTIARY_SEL_REGOFFSET      0x10008c
+#define OX820_SEC_QUATERNARY_SEL_REGOFFSET    0x100094
+#define OX820_SEC_DEBUG_SEL_REGOFFSET         0x10009c
+#define OX820_SEC_ALTERNATIVE_SEL_REGOFFSET   0x1000a4
+#define OX820_SEC_PULLUP_SEL_REGOFFSET        0x1000ac
+
+struct oxnas_restart_context {
+	struct regmap *sys_ctrl;
+	struct notifier_block restart_handler;
+};
+
+static int ox820_restart_handle(struct notifier_block *this,
+				 unsigned long mode, void *cmd)
+{
+	struct oxnas_restart_context *ctx = container_of(this, struct
+							oxnas_restart_context,
+							restart_handler);
+	u32 value;
+
+	/*
+	 * Assert reset to cores as per power on defaults
+	 * Don't touch the DDR interface as things will come to an impromptu
+	 * stop NB Possibly should be asserting reset for PLLB, but there are
+	 * timing concerns here according to the docs
+	 */
+	value = BIT(OX820_SYS_CTRL_RST_COPRO)		|
+		BIT(OX820_SYS_CTRL_RST_USBHS)		|
+		BIT(OX820_SYS_CTRL_RST_USBHSPHYA)	|
+		BIT(OX820_SYS_CTRL_RST_MACA)		|
+		BIT(OX820_SYS_CTRL_RST_PCIEA)		|
+		BIT(OX820_SYS_CTRL_RST_SGDMA)		|
+		BIT(OX820_SYS_CTRL_RST_CIPHER)		|
+		BIT(OX820_SYS_CTRL_RST_SATA)		|
+		BIT(OX820_SYS_CTRL_RST_SATA_LINK)	|
+		BIT(OX820_SYS_CTRL_RST_SATA_PHY)	|
+		BIT(OX820_SYS_CTRL_RST_PCIEPHY)		|
+		BIT(OX820_SYS_CTRL_RST_STATIC)		|
+		BIT(OX820_SYS_CTRL_RST_UART1)		|
+		BIT(OX820_SYS_CTRL_RST_UART2)		|
+		BIT(OX820_SYS_CTRL_RST_MISC)		|
+		BIT(OX820_SYS_CTRL_RST_I2S)		|
+		BIT(OX820_SYS_CTRL_RST_SD)		|
+		BIT(OX820_SYS_CTRL_RST_MACB)		|
+		BIT(OX820_SYS_CTRL_RST_PCIEB)		|
+		BIT(OX820_SYS_CTRL_RST_VIDEO)		|
+		BIT(OX820_SYS_CTRL_RST_USBHSPHYB)	|
+		BIT(OX820_SYS_CTRL_RST_USBDEV);
+
+	regmap_write(ctx->sys_ctrl, OX820_RST_SET_REGOFFSET, value);
+
+	/* Release reset to cores as per power on defaults */
+	regmap_write(ctx->sys_ctrl, OX820_RST_CLR_REGOFFSET,
+			BIT(OX820_SYS_CTRL_RST_GPIO));
+
+	/*
+	 * Disable clocks to cores as per power-on defaults - must leave DDR
+	 * related clocks enabled otherwise we'll stop rather abruptly.
+	 */
+	value = BIT(OX820_SYS_CTRL_CLK_COPRO)		|
+		BIT(OX820_SYS_CTRL_CLK_DMA)		|
+		BIT(OX820_SYS_CTRL_CLK_CIPHER)		|
+		BIT(OX820_SYS_CTRL_CLK_SD)		|
+		BIT(OX820_SYS_CTRL_CLK_SATA)		|
+		BIT(OX820_SYS_CTRL_CLK_I2S)		|
+		BIT(OX820_SYS_CTRL_CLK_USBHS)		|
+		BIT(OX820_SYS_CTRL_CLK_MAC)		|
+		BIT(OX820_SYS_CTRL_CLK_PCIEA)		|
+		BIT(OX820_SYS_CTRL_CLK_STATIC)		|
+		BIT(OX820_SYS_CTRL_CLK_MACB)		|
+		BIT(OX820_SYS_CTRL_CLK_PCIEB)		|
+		BIT(OX820_SYS_CTRL_CLK_REF600)		|
+		BIT(OX820_SYS_CTRL_CLK_USBDEV);
+
+	regmap_write(ctx->sys_ctrl, OX820_CLK_CLR_REGOFFSET, value);
+
+	/* Enable clocks to cores as per power-on defaults */
+
+	/* Set sys-control pin mux'ing as per power-on defaults */
+	regmap_write(ctx->sys_ctrl, OX820_SECONDARY_SEL_REGOFFSET, 0);
+	regmap_write(ctx->sys_ctrl, OX820_TERTIARY_SEL_REGOFFSET, 0);
+	regmap_write(ctx->sys_ctrl, OX820_QUATERNARY_SEL_REGOFFSET, 0);
+	regmap_write(ctx->sys_ctrl, OX820_DEBUG_SEL_REGOFFSET, 0);
+	regmap_write(ctx->sys_ctrl, OX820_ALTERNATIVE_SEL_REGOFFSET, 0);
+	regmap_write(ctx->sys_ctrl, OX820_PULLUP_SEL_REGOFFSET, 0);
+
+	regmap_write(ctx->sys_ctrl, OX820_SEC_SECONDARY_SEL_REGOFFSET, 0);
+	regmap_write(ctx->sys_ctrl, OX820_SEC_TERTIARY_SEL_REGOFFSET, 0);
+	regmap_write(ctx->sys_ctrl, OX820_SEC_QUATERNARY_SEL_REGOFFSET, 0);
+	regmap_write(ctx->sys_ctrl, OX820_SEC_DEBUG_SEL_REGOFFSET, 0);
+	regmap_write(ctx->sys_ctrl, OX820_SEC_ALTERNATIVE_SEL_REGOFFSET, 0);
+	regmap_write(ctx->sys_ctrl, OX820_SEC_PULLUP_SEL_REGOFFSET, 0);
+
+	/*
+	 * No need to save any state, as the ROM loader can determine whether
+	 * reset is due to power cycling or programatic action, just hit the
+	 * (self-clearing) CPU reset bit of the block reset register
+	 */
+	value =
+		BIT(OX820_SYS_CTRL_RST_SCU) |
+		BIT(OX820_SYS_CTRL_RST_ARM0) |
+		BIT(OX820_SYS_CTRL_RST_ARM1);
+
+	regmap_write(ctx->sys_ctrl, OX820_RST_SET_REGOFFSET, value);
+
+	pr_emerg("Unable to restart system\n");
+	return NOTIFY_DONE;
+}
+
+static int ox820_restart_probe(struct platform_device *pdev)
+{
+	struct oxnas_restart_context *ctx;
+	struct regmap *sys_ctrl;
+	struct device *dev = &pdev->dev;
+	int err = 0;
+
+	sys_ctrl = syscon_node_to_regmap(pdev->dev.of_node);
+	if (IS_ERR(sys_ctrl))
+		return PTR_ERR(sys_ctrl);
+
+	ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	ctx->sys_ctrl = sys_ctrl;
+	ctx->restart_handler.notifier_call = ox820_restart_handle;
+	ctx->restart_handler.priority = 192;
+	err = register_restart_handler(&ctx->restart_handler);
+	if (err)
+		dev_err(dev, "can't register restart notifier (err=%d)\n", err);
+
+	return err;
+}
+
+static const struct of_device_id ox820_restart_of_match[] = {
+	{ .compatible = "oxsemi,ox820-sys-ctrl" },
+	{}
+};
+
+static struct platform_driver ox820_restart_driver = {
+	.probe = ox820_restart_probe,
+	.driver = {
+		.name = "ox820-chip-reset",
+		.of_match_table = ox820_restart_of_match,
+	},
+};
+builtin_platform_driver(ox820_restart_driver);

drivers/power/reset/qcom-pon.c

@@ -34,7 +34,8 @@ static int pm8916_reboot_mode_write(struct reboot_mode_driver *reboot,
 
 	ret = regmap_update_bits(pon->regmap,
 				 pon->baseaddr + PON_SOFT_RB_SPARE,
-				 0xfc, magic << pon->reason_shift);
+				 GENMASK(7, pon->reason_shift),
+				 magic << pon->reason_shift);
 	if (ret < 0)
 		dev_err(pon->dev, "update reboot mode bits failed\n");
 

drivers/power/reset/syscon-reboot.c

@@ -51,8 +51,11 @@ static int syscon_reboot_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	ctx->map = syscon_regmap_lookup_by_phandle(dev->of_node, "regmap");
+	if (IS_ERR(ctx->map)) {
+		ctx->map = syscon_node_to_regmap(dev->parent->of_node);
 		if (IS_ERR(ctx->map))
 			return PTR_ERR(ctx->map);
+	}
 
 	if (of_property_read_u32(pdev->dev.of_node, "offset", &ctx->offset))
 		return -EINVAL;

drivers/power/supply/88pm860x_battery.c

@@ -919,16 +919,12 @@ static int pm860x_battery_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	info->irq_cc = platform_get_irq(pdev, 0);
-	if (info->irq_cc <= 0) {
-		dev_err(&pdev->dev, "No IRQ resource!\n");
+	if (info->irq_cc <= 0)
 		return -EINVAL;
-	}
 
 	info->irq_batt = platform_get_irq(pdev, 1);
-	if (info->irq_batt <= 0) {
-		dev_err(&pdev->dev, "No IRQ resource!\n");
+	if (info->irq_batt <= 0)
 		return -EINVAL;
-	}
 
 	info->chip = chip;
 	info->i2c =

drivers/power/supply/Kconfig

@@ -116,6 +116,17 @@ config BATTERY_CPCAP
 	  Say Y here to enable support for battery on Motorola
 	  phones and tablets such as droid 4.
 
+config BATTERY_CW2015
+	tristate "CW2015 Battery driver"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Say Y here to enable support for the cellwise cw2015
+	  battery fuel gauge (used in the Pinebook Pro & others)
+
+	  This driver can also be built as a module. If so, the module will be
+	  called cw2015_battery.
+
 config BATTERY_DS2760
 	tristate "DS2760 battery driver (HP iPAQ & others)"
 	depends on W1
@@ -587,7 +598,7 @@ config CHARGER_BQ24257
 	tristate "TI BQ24250/24251/24257 battery charger driver"
 	depends on I2C
 	depends on GPIOLIB || COMPILE_TEST
-	depends on REGMAP_I2C
+	select REGMAP_I2C
 	help
 	  Say Y to enable support for the TI BQ24250, BQ24251, and BQ24257 battery
 	  chargers.
@@ -670,7 +681,6 @@ config CHARGER_RT9455
 config CHARGER_CROS_USBPD
 	tristate "ChromeOS EC based USBPD charger"
 	depends on CROS_USBPD_NOTIFY
-	default n
 	help
 	  Say Y here to enable ChromeOS EC based USBPD charger
 	  driver. This driver gets various bits of information about
@@ -705,12 +715,21 @@ config CHARGER_UCS1002
 config CHARGER_BD70528
 	tristate "ROHM bd70528 charger driver"
 	depends on MFD_ROHM_BD70528
-	default n
+	select LINEAR_RANGES
 	help
 	  Say Y here to enable support for getting battery status
 	  information and altering charger configurations from charger
 	  block of the ROHM BD70528 Power Management IC.
 
+config CHARGER_BD99954
+	tristate "ROHM bd99954 charger driver"
+	depends on I2C
+	select LINEAR_RANGES
+	help
+	  Say Y here to enable support for getting battery and charger
+	  information and altering charger configurations from the ROHM
+	  BD99954 charger IC.
+
 config CHARGER_WILCO
 	tristate "Wilco EC based charger for ChromeOS"
 	depends on WILCO_EC

drivers/power/supply/Makefile

@@ -24,6 +24,7 @@ obj-$(CONFIG_BATTERY_ACT8945A)	+= act8945a_charger.o
 obj-$(CONFIG_BATTERY_AXP20X)	+= axp20x_battery.o
 obj-$(CONFIG_CHARGER_AXP20X)	+= axp20x_ac_power.o
 obj-$(CONFIG_BATTERY_CPCAP)	+= cpcap-battery.o
+obj-$(CONFIG_BATTERY_CW2015)	+= cw2015_battery.o
 obj-$(CONFIG_BATTERY_DS2760)	+= ds2760_battery.o
 obj-$(CONFIG_BATTERY_DS2780)	+= ds2780_battery.o
 obj-$(CONFIG_BATTERY_DS2781)	+= ds2781_battery.o
@@ -92,4 +93,5 @@ obj-$(CONFIG_CHARGER_SC2731)	+= sc2731_charger.o
 obj-$(CONFIG_FUEL_GAUGE_SC27XX)	+= sc27xx_fuel_gauge.o
 obj-$(CONFIG_CHARGER_UCS1002)	+= ucs1002_power.o
 obj-$(CONFIG_CHARGER_BD70528)	+= bd70528-charger.o
+obj-$(CONFIG_CHARGER_BD99954)	+= bd99954-charger.o
 obj-$(CONFIG_CHARGER_WILCO)	+= wilco-charger.o

drivers/power/supply/ab8500_fg.c

@@ -2399,7 +2399,7 @@ static void ab8500_fg_reinit_work(struct work_struct *work)
 	struct ab8500_fg *di = container_of(work, struct ab8500_fg,
 		fg_reinit_work.work);
 
-	if (di->flags.calibrate == false) {
+	if (!di->flags.calibrate) {
 		dev_dbg(di->dev, "Resetting FG state machine to init.\n");
 		ab8500_fg_clear_cap_samples(di);
 		ab8500_fg_calc_cap_discharge_voltage(di, true);

drivers/power/supply/axp288_charger.c

@@ -880,10 +880,9 @@ static int axp288_charger_probe(struct platform_device *pdev)
 	/* Register charger interrupts */
 	for (i = 0; i < CHRG_INTR_END; i++) {
 		pirq = platform_get_irq(info->pdev, i);
-		if (pirq < 0) {
-			dev_err(&pdev->dev, "Failed to get IRQ: %d\n", pirq);
+		if (pirq < 0)
 			return pirq;
-		}
+
 		info->irq[i] = regmap_irq_get_virq(info->regmap_irqc, pirq);
 		if (info->irq[i] < 0) {
 			dev_warn(&info->pdev->dev,

drivers/power/supply/axp288_fuel_gauge.c

@@ -717,6 +717,12 @@ static const struct dmi_system_id axp288_fuel_gauge_blacklist[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "STK1A32SC"),
 		},
 	},
+	{
+		/* Meegopad T02 */
+		.matches = {
+			DMI_MATCH(DMI_PRODUCT_NAME, "MEEGOPAD T02"),
+		},
+	},
 	{
 		/* Meegopad T08 */
 		.matches = {

drivers/power/supply/bd70528-charger.c

@@ -72,6 +72,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/power_supply.h>
+#include <linux/linear_range.h>
 
 #define CHG_STAT_SUSPEND	0x0
 #define CHG_STAT_TRICKLE	0x1
@@ -335,38 +336,37 @@ static int bd70528_get_present(struct bd70528_psy *bdpsy, int *val)
 	return 0;
 }
 
-struct bd70528_linear_range {
-	int min;
-	int step;
-	int vals;
-	int low_sel;
-};
-
-static const struct bd70528_linear_range current_limit_ranges[] = {
+static const struct linear_range current_limit_ranges[] = {
 	{
 		.min = 5,
 		.step = 1,
-		.vals = 36,
-		.low_sel = 0,
+		.min_sel = 0,
+		.max_sel = 0x22,
 	},
 	{
 		.min = 40,
 		.step = 5,
-		.vals = 5,
-		.low_sel = 0x23,
+		.min_sel = 0x23,
+		.max_sel = 0x26,
 	},
 	{
 		.min = 60,
 		.step = 20,
-		.vals = 8,
-		.low_sel = 0x27,
+		.min_sel = 0x27,
+		.max_sel = 0x2d,
 	},
 	{
 		.min = 200,
 		.step = 50,
-		.vals = 7,
-		.low_sel = 0x2e,
-	}
+		.min_sel = 0x2e,
+		.max_sel = 0x34,
+	},
+	{
+		.min = 500,
+		.step = 0,
+		.min_sel = 0x35,
+		.max_sel = 0x3f,
+	},
 };
 
 /*
@@ -374,18 +374,18 @@ static const struct bd70528_linear_range current_limit_ranges[] = {
  * voltage for low temperatures. The driver currently only reads
  * the charge current at room temperature. We do set both though.
  */
-static const struct bd70528_linear_range warm_charge_curr[] = {
+static const struct linear_range warm_charge_curr[] = {
 	{
 		.min = 10,
 		.step = 10,
-		.vals = 20,
-		.low_sel = 0,
+		.min_sel = 0,
+		.max_sel = 0x12,
 	},
 	{
 		.min = 200,
 		.step = 25,
-		.vals = 13,
-		.low_sel = 0x13,
+		.min_sel = 0x13,
+		.max_sel = 0x1f,
 	},
 };
 
@@ -398,56 +398,6 @@ static const struct bd70528_linear_range warm_charge_curr[] = {
 #define MAX_WARM_CHG_CURR_SEL 0x1f
 #define MIN_CHG_CURR_SEL 0x0
 
-static int find_value_for_selector_low(const struct bd70528_linear_range *r,
-				       int selectors, unsigned int sel,
-				       unsigned int *val)
-{
-	int i;
-
-	for (i = 0; i < selectors; i++) {
-		if (r[i].low_sel <= sel && r[i].low_sel + r[i].vals >= sel) {
-			*val = r[i].min + (sel - r[i].low_sel) * r[i].step;
-			return 0;
-		}
-	}
-	return -EINVAL;
-}
-
-/*
- * For BD70528 voltage/current limits we happily accept any value which
- * belongs the range. We could check if value matching the selector is
- * desired by computing the range min + (sel - sel_low) * range step - but
- * I guess it is enough if we use voltage/current which is closest (below)
- * the requested?
- */
-static int find_selector_for_value_low(const struct bd70528_linear_range *r,
-				       int selectors, unsigned int val,
-				       unsigned int *sel, bool *found)
-{
-	int i;
-	int ret = -EINVAL;
-
-	*found = false;
-	for (i = 0; i < selectors; i++) {
-		if (r[i].min <= val) {
-			if (r[i].min + r[i].step * r[i].vals >= val) {
-				*found = true;
-				*sel = r[i].low_sel + (val - r[i].min) /
-				       r[i].step;
-				ret = 0;
-				break;
-			}
-			/*
-			 * If the range max is smaller than requested
-			 * we can set the max supported value from range
-			 */
-			*sel = r[i].low_sel + r[i].vals;
-			ret = 0;
-		}
-	}
-	return ret;
-}
-
 static int get_charge_current(struct bd70528_psy *bdpsy, int *ma)
 {
 	unsigned int sel;
@@ -463,9 +413,9 @@ static int get_charge_current(struct bd70528_psy *bdpsy, int *ma)
 
 	sel &= BD70528_MASK_CHG_CHG_CURR;
 
-	ret = find_value_for_selector_low(&warm_charge_curr[0],
-					  ARRAY_SIZE(warm_charge_curr), sel,
-					  ma);
+	ret = linear_range_get_value_array(&warm_charge_curr[0],
+					   ARRAY_SIZE(warm_charge_curr),
+					   sel, ma);
 	if (ret) {
 		dev_err(bdpsy->dev,
 			"Unknown charge current value 0x%x\n",
@@ -491,10 +441,9 @@ static int get_current_limit(struct bd70528_psy *bdpsy, int *ma)
 
 	sel &= BD70528_MASK_CHG_DCIN_ILIM;
 
-	ret = find_value_for_selector_low(&current_limit_ranges[0],
-					  ARRAY_SIZE(current_limit_ranges), sel,
-					  ma);
-
+	ret = linear_range_get_value_array(&current_limit_ranges[0],
+					   ARRAY_SIZE(current_limit_ranges),
+					   sel, ma);
 	if (ret) {
 		/* Unspecified values mean 500 mA */
 		*ma = 500;
@@ -588,15 +537,28 @@ static int set_charge_current(struct bd70528_psy *bdpsy, int ma)
 		goto set;
 	}
 
-	ret = find_selector_for_value_low(&warm_charge_curr[0],
-					  ARRAY_SIZE(warm_charge_curr), ma,
-					  &reg, &found);
+/*
+ * For BD70528 voltage/current limits we happily accept any value which
+ * belongs the range. We could check if value matching the selector is
+ * desired by computing the range min + (sel - sel_low) * range step - but
+ * I guess it is enough if we use voltage/current which is closest (below)
+ * the requested?
+ */
+
+	ret = linear_range_get_selector_low_array(warm_charge_curr,
+						  ARRAY_SIZE(warm_charge_curr),
+						  ma, &reg, &found);
 	if (ret) {
+		dev_err(bdpsy->dev,
+			 "Unsupported charge current %u mA\n", ma);
 		reg = MIN_CHG_CURR_SEL;
 		goto set;
 	}
 	if (!found) {
-		/* There was a gap in supported values and we hit it */
+		/*
+		 * There was a gap in supported values and we hit it.
+		 * Yet a smaller value was found so we use it.
+		 */
 		dev_warn(bdpsy->dev,
 			 "Unsupported charge current %u mA\n", ma);
 	}
@@ -648,17 +610,21 @@ static int set_current_limit(struct bd70528_psy *bdpsy, int ma)
 		goto set;
 	}
 
-	ret = find_selector_for_value_low(&current_limit_ranges[0],
-					  ARRAY_SIZE(current_limit_ranges), ma,
-					  &reg, &found);
+	ret = linear_range_get_selector_low_array(current_limit_ranges,
+					ARRAY_SIZE(current_limit_ranges),
+					ma, &reg, &found);
 	if (ret) {
+		dev_err(bdpsy->dev, "Unsupported current limit %umA\n", ma);
 		reg = MIN_CURR_LIMIT_SEL;
 		goto set;
 	}
 	if (!found) {
-		/* There was a gap in supported values and we hit it ?*/
-		dev_warn(bdpsy->dev, "Unsupported current limit %umA\n",
-			 ma);
+		/*
+		 * There was a gap in supported values and we hit it.
+		 * We found a smaller value from ranges and use it.
+		 * Warn user though.
+		 */
+		dev_warn(bdpsy->dev, "Unsupported current limit %umA\n", ma);
 	}
 
 set:

drivers/power/supply/bq24190_charger.c

@@ -673,7 +673,7 @@ static int bq24190_register_reset(struct bq24190_dev_info *bdi)
 	 *   { .type = "bq24190", .addr = 0x6b, .properties = pe, .irq = irq };
 	 * struct i2c_adapter ad = { ... };
 	 * i2c_add_adapter(&ad);
-	 * i2c_new_device(&ad, &bi);
+	 * i2c_new_client_device(&ad, &bi);
 	 */
 	if (device_property_read_bool(bdi->dev, "disable-reset"))
 		return 0;

drivers/power/supply/charger-manager.c

@@ -1422,7 +1422,9 @@ static int charger_manager_prepare_sysfs(struct charger_manager *cm)
 }
 
 static int cm_init_thermal_data(struct charger_manager *cm,
-		struct power_supply *fuel_gauge)
+		struct power_supply *fuel_gauge,
+		enum power_supply_property *properties,
+		size_t *num_properties)
 {
 	struct charger_desc *desc = cm->desc;
 	union power_supply_propval val;
@@ -1433,9 +1435,8 @@ static int cm_init_thermal_data(struct charger_manager *cm,
 					POWER_SUPPLY_PROP_TEMP, &val);
 
 	if (!ret) {
-		cm->charger_psy_desc.properties[cm->charger_psy_desc.num_properties] =
-				POWER_SUPPLY_PROP_TEMP;
-		cm->charger_psy_desc.num_properties++;
+		properties[*num_properties] = POWER_SUPPLY_PROP_TEMP;
+		(*num_properties)++;
 		cm->desc->measure_battery_temp = true;
 	}
 #ifdef CONFIG_THERMAL
@@ -1446,9 +1447,8 @@ static int cm_init_thermal_data(struct charger_manager *cm,
 			return PTR_ERR(cm->tzd_batt);
 
 		/* Use external thermometer */
-		cm->charger_psy_desc.properties[cm->charger_psy_desc.num_properties] =
-				POWER_SUPPLY_PROP_TEMP_AMBIENT;
-		cm->charger_psy_desc.num_properties++;
+		properties[*num_properties] = POWER_SUPPLY_PROP_TEMP_AMBIENT;
+		(*num_properties)++;
 		cm->desc->measure_battery_temp = true;
 		ret = 0;
 	}
@@ -1621,6 +1621,8 @@ static int charger_manager_probe(struct platform_device *pdev)
 	int j = 0;
 	union power_supply_propval val;
 	struct power_supply *fuel_gauge;
+	enum power_supply_property *properties;
+	size_t num_properties;
 	struct power_supply_config psy_cfg = {};
 
 	if (IS_ERR(desc)) {
@@ -1717,18 +1719,17 @@ static int charger_manager_probe(struct platform_device *pdev)
 	cm->charger_psy_desc.name = cm->psy_name_buf;
 
 	/* Allocate for psy properties because they may vary */
-	cm->charger_psy_desc.properties =
-		devm_kcalloc(&pdev->dev,
+	properties = devm_kcalloc(&pdev->dev,
 			     ARRAY_SIZE(default_charger_props) +
 				NUM_CHARGER_PSY_OPTIONAL,
-			     sizeof(enum power_supply_property), GFP_KERNEL);
-	if (!cm->charger_psy_desc.properties)
+			     sizeof(*properties), GFP_KERNEL);
+	if (!properties)
 		return -ENOMEM;
 
-	memcpy(cm->charger_psy_desc.properties, default_charger_props,
+	memcpy(properties, default_charger_props,
 		sizeof(enum power_supply_property) *
 		ARRAY_SIZE(default_charger_props));
-	cm->charger_psy_desc.num_properties = psy_default.num_properties;
+	num_properties = ARRAY_SIZE(default_charger_props);
 
 	/* Find which optional psy-properties are available */
 	fuel_gauge = power_supply_get_by_name(desc->psy_fuel_gauge);
@@ -1739,25 +1740,28 @@ static int charger_manager_probe(struct platform_device *pdev)
 	}
 	if (!power_supply_get_property(fuel_gauge,
 					  POWER_SUPPLY_PROP_CHARGE_NOW, &val)) {
-		cm->charger_psy_desc.properties[cm->charger_psy_desc.num_properties] =
+		properties[num_properties] =
 				POWER_SUPPLY_PROP_CHARGE_NOW;
-		cm->charger_psy_desc.num_properties++;
+		num_properties++;
 	}
 	if (!power_supply_get_property(fuel_gauge,
 					  POWER_SUPPLY_PROP_CURRENT_NOW,
 					  &val)) {
-		cm->charger_psy_desc.properties[cm->charger_psy_desc.num_properties] =
+		properties[num_properties] =
 				POWER_SUPPLY_PROP_CURRENT_NOW;
-		cm->charger_psy_desc.num_properties++;
+		num_properties++;
 	}
 
-	ret = cm_init_thermal_data(cm, fuel_gauge);
+	ret = cm_init_thermal_data(cm, fuel_gauge, properties, &num_properties);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to initialize thermal data\n");
 		cm->desc->measure_battery_temp = false;
 	}
 	power_supply_put(fuel_gauge);
 
+	cm->charger_psy_desc.properties = properties;
+	cm->charger_psy_desc.num_properties = num_properties;
+
 	INIT_DELAYED_WORK(&cm->fullbatt_vchk_work, fullbatt_vchk);
 
 	/* Register sysfs entry for charger(regulator) */

drivers/power/supply/generic-adc-battery.c

@@ -241,6 +241,7 @@ static int gab_probe(struct platform_device *pdev)
 	struct power_supply_desc *psy_desc;
 	struct power_supply_config psy_cfg = {};
 	struct gab_platform_data *pdata = pdev->dev.platform_data;
+	enum power_supply_property *properties;
 	int ret = 0;
 	int chan;
 	int index = ARRAY_SIZE(gab_props);
@@ -268,16 +269,16 @@ static int gab_probe(struct platform_device *pdev)
 	 * copying the static properties and allocating extra memory for holding
 	 * the extra configurable properties received from platform data.
 	 */
-	psy_desc->properties = kcalloc(ARRAY_SIZE(gab_props) +
+	properties = kcalloc(ARRAY_SIZE(gab_props) +
 			     ARRAY_SIZE(gab_chan_name),
-					sizeof(*psy_desc->properties),
+			     sizeof(*properties),
 			     GFP_KERNEL);
-	if (!psy_desc->properties) {
+	if (!properties) {
 		ret = -ENOMEM;
 		goto first_mem_fail;
 	}
 
-	memcpy(psy_desc->properties, gab_props, sizeof(gab_props));
+	memcpy(properties, gab_props, sizeof(gab_props));
 
 	/*
 	 * getting channel from iio and copying the battery properties
@@ -294,13 +295,11 @@ static int gab_probe(struct platform_device *pdev)
 			int index2;
 
 			for (index2 = 0; index2 < index; index2++) {
-				if (psy_desc->properties[index2] ==
-				    gab_dyn_props[chan])
+				if (properties[index2] == gab_dyn_props[chan])
 					break;	/* already known */
 			}
 			if (index2 == index)	/* really new */
-				psy_desc->properties[index++] =
-					gab_dyn_props[chan];
+				properties[index++] = gab_dyn_props[chan];
 			any = true;
 		}
 	}
@@ -317,6 +316,7 @@ static int gab_probe(struct platform_device *pdev)
 	 * as come channels may be not be supported by the device.So
 	 * we need to take care of that.
 	 */
+	psy_desc->properties = properties;
 	psy_desc->num_properties = index;
 
 	adc_bat->psy = power_supply_register(&pdev->dev, psy_desc, &psy_cfg);
@@ -358,7 +358,7 @@ static int gab_probe(struct platform_device *pdev)
 			iio_channel_release(adc_bat->channel[chan]);
 	}
 second_mem_fail:
-	kfree(psy_desc->properties);
+	kfree(properties);
 first_mem_fail:
 	return ret;
 }

drivers/power/supply/max14577_charger.c

@@ -623,9 +623,19 @@ static const struct platform_device_id max14577_charger_id[] = {
 };
 MODULE_DEVICE_TABLE(platform, max14577_charger_id);
 
+static const struct of_device_id of_max14577_charger_dt_match[] = {
+	{ .compatible = "maxim,max14577-charger",
+	  .data = (void *)MAXIM_DEVICE_TYPE_MAX14577, },
+	{ .compatible = "maxim,max77836-charger",
+	  .data = (void *)MAXIM_DEVICE_TYPE_MAX77836, },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, of_max14577_charger_dt_match);
+
 static struct platform_driver max14577_charger_driver = {
 	.driver = {
 		.name	= "max14577-charger",
+		.of_match_table = of_max14577_charger_dt_match,
 	},
 	.probe		= max14577_charger_probe,
 	.remove		= max14577_charger_remove,