iio: imu: st_lsm6dsx: check if pull_up is located in primary page

Check if the pull up register is located in the primary or in the
secondary memory page. This is a preliminary patch to support i2c master
controller on lsm6dsm devices
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h

@@ -189,7 +189,11 @@ struct st_lsm6dsx_shub_settings {
 		u8 addr;
 		u8 mask;
 	} master_en;
-	struct st_lsm6dsx_reg pullup_en;
+	struct {
+		bool sec_page;
+		u8 addr;
+		u8 mask;
+	} pullup_en;
 	struct st_lsm6dsx_reg aux_sens;
 	struct st_lsm6dsx_reg wr_once;
 	u8 num_ext_dev;

drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c

@@ -873,6 +873,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.mask = BIT(2),
 			},
 			.pullup_en = {
+				.sec_page = true,
 				.addr = 0x14,
 				.mask = BIT(3),
 			},
@@ -1249,6 +1250,7 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
 				.mask = BIT(2),
 			},
 			.pullup_en = {
+				.sec_page = true,
 				.addr = 0x14,
 				.mask = BIT(3),
 			},
@@ -1864,15 +1866,18 @@ static int st_lsm6dsx_init_shub(struct st_lsm6dsx_hw *hw)
 	pdata = (struct st_sensors_platform_data *)dev->platform_data;
 	if ((dev_fwnode(dev) && device_property_read_bool(dev, "st,pullups")) ||
 	    (pdata && pdata->pullups)) {
+		if (hub_settings->pullup_en.sec_page) {
 			err = st_lsm6dsx_set_page(hw, true);
 			if (err < 0)
 				return err;
+		}
 
 		data = ST_LSM6DSX_SHIFT_VAL(1, hub_settings->pullup_en.mask);
 		err = regmap_update_bits(hw->regmap,
 					 hub_settings->pullup_en.addr,
 					 hub_settings->pullup_en.mask, data);
 
+		if (hub_settings->pullup_en.sec_page)
 			st_lsm6dsx_set_page(hw, false);
 
 		if (err < 0)