Commit 3ab3dbdf authored by Lars-Peter Clausen's avatar Lars-Peter Clausen Committed by Mark Brown

ASoC: ad1980: Use core AC'97 reset helper

Use the new snd_ac97_reset() helper function to perform the reset and
verify the device ID.

Unfortunately the reset can't be done in snd_soc_new_ac97_codec() due to
the special requirements in order to support the non-standard 16-bit slot
mode of the ad1980.
Signed-off-by: default avatarLars-Peter Clausen <lars@metafoo.de>
Reviewed-by: default avatarTakashi Iwai <tiwai@suse.de>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent 7361fbea
......@@ -202,19 +202,21 @@ static struct snd_soc_dai_driver ad1980_dai = {
.formats = SND_SOC_STD_AC97_FMTS, },
};
#define AD1980_VENDOR_ID 0x41445300
#define AD1980_VENDOR_MASK 0xffffff00
static int ad1980_reset(struct snd_soc_codec *codec, int try_warm)
{
struct snd_ac97 *ac97 = snd_soc_codec_get_drvdata(codec);
unsigned int retry_cnt = 0;
int ret;
do {
if (try_warm && soc_ac97_ops->warm_reset) {
soc_ac97_ops->warm_reset(ac97);
if (snd_soc_read(codec, AC97_RESET) == 0x0090)
return 1;
}
ret = snd_ac97_reset(ac97, true, AD1980_VENDOR_ID,
AD1980_VENDOR_MASK);
if (ret >= 0)
return 0;
soc_ac97_ops->reset(ac97);
/*
* Set bit 16slot in register 74h, then every slot will has only
* 16 bits. This command is sent out in 20bit mode, in which
......@@ -223,8 +225,6 @@ static int ad1980_reset(struct snd_soc_codec *codec, int try_warm)
*/
snd_soc_write(codec, AC97_AD_SERIAL_CFG, 0x9900);
if (snd_soc_read(codec, AC97_RESET) == 0x0090)
return 0;
} while (retry_cnt++ < 10);
dev_err(codec->dev, "Failed to reset: AC97 link error\n");
......@@ -260,22 +260,10 @@ static int ad1980_soc_probe(struct snd_soc_codec *codec)
if (ret < 0)
goto reset_err;
/* Read out vendor ID to make sure it is ad1980 */
if (snd_soc_read(codec, AC97_VENDOR_ID1) != 0x4144) {
ret = -ENODEV;
goto reset_err;
}
vendor_id2 = snd_soc_read(codec, AC97_VENDOR_ID2);
if (vendor_id2 != 0x5370) {
if (vendor_id2 != 0x5374) {
ret = -ENODEV;
goto reset_err;
} else {
dev_warn(codec->dev,
"Found AD1981 - only 2/2 IN/OUT Channels supported\n");
}
if (vendor_id2 == 0x5374) {
dev_warn(codec->dev,
"Found AD1981 - only 2/2 IN/OUT Channels supported\n");
}
/* unmute captures and playbacks volume */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment