Merge remote-tracking branches 'spi/topic/bcm63xx', 'spi/topic/butterfly',...

Merge remote-tracking branches 'spi/topic/bcm63xx', 'spi/topic/butterfly', 'spi/topic/cadence' and 'spi/topic/davinci' into spi-next

drivers/spi/spi-bcm63xx.c

@@ -207,6 +207,9 @@ static void bcm63xx_spi_setup_transfer(struct spi_device *spi,
 	u8 clk_cfg, reg;
 	int i;
 
+	/* Default to lowest clock configuration */
+	clk_cfg = SPI_CLK_0_391MHZ;
+
 	/* Find the closest clock configuration */
 	for (i = 0; i < SPI_CLK_MASK; i++) {
 		if (t->speed_hz >= bcm63xx_spi_freq_table[i][0]) {
@@ -215,10 +218,6 @@ static void bcm63xx_spi_setup_transfer(struct spi_device *spi,
 		}
 	}
 
-	/* No matching configuration found, default to lowest */
-	if (i == SPI_CLK_MASK)
-		clk_cfg = SPI_CLK_0_391MHZ;
-
 	/* clear existing clock configuration bits of the register */
 	reg = bcm_spi_readb(bs, SPI_CLK_CFG);
 	reg &= ~SPI_CLK_MASK;

drivers/spi/spi-butterfly.c

@@ -27,7 +27,6 @@
 
 #include <linux/mtd/partitions.h>
 
-
 /*
  * This uses SPI to talk with an "AVR Butterfly", which is a $US20 card
  * with a battery powered AVR microcontroller and lots of goodies.  You
@@ -37,7 +36,6 @@
  * and use this custom parallel port cable.
  */
 
-
 /* DATA output bits (pins 2..9 == D0..D7) */
 #define	butterfly_nreset (1 << 1)		/* pin 3 */
 
@@ -52,14 +50,11 @@
 /* CONTROL output bits */
 #define	spi_cs_bit	PARPORT_CONTROL_SELECT	/* pin 17 */
 
-
-
 static inline struct butterfly *spidev_to_pp(struct spi_device *spi)
 {
 	return spi->controller_data;
 }
 
-
 struct butterfly {
 	/* REVISIT ... for now, this must be first */
 	struct spi_bitbang	bitbang;
@@ -140,7 +135,6 @@ static void butterfly_chipselect(struct spi_device *spi, int value)
 	parport_frob_control(pp->port, spi_cs_bit, value ? spi_cs_bit : 0);
 }
 
-
 /* we only needed to implement one mode here, and choose SPI_MODE_0 */
 
 #define spidelay(X)	do { } while (0)
@@ -149,9 +143,8 @@ static void butterfly_chipselect(struct spi_device *spi, int value)
 #include "spi-bitbang-txrx.h"
 
 static u32
-butterfly_txrx_word_mode0(struct spi_device *spi,
-		unsigned nsecs,
-		u32 word, u8 bits)
+butterfly_txrx_word_mode0(struct spi_device *spi, unsigned nsecs, u32 word,
+			  u8 bits)
 {
 	return bitbang_txrx_be_cpha0(spi, nsecs, 0, 0, word, bits);
 }
@@ -186,7 +179,6 @@ static struct flash_platform_data flash = {
 	.nr_parts	= ARRAY_SIZE(partitions),
 };
 
-
 /* REVISIT remove this ugly global and its "only one" limitation */
 static struct butterfly *butterfly;
 
@@ -197,6 +189,7 @@ static void butterfly_attach(struct parport *p)
 	struct butterfly	*pp;
 	struct spi_master	*master;
 	struct device		*dev = p->physport->dev;
+	struct pardev_cb	butterfly_cb;
 
 	if (butterfly || !dev)
 		return;
@@ -229,9 +222,9 @@ static void butterfly_attach(struct parport *p)
 	 * parport hookup
 	 */
 	pp->port = p;
-	pd = parport_register_device(p, "spi_butterfly",
-			NULL, NULL, NULL,
-			0 /* FLAGS */, pp);
+	memset(&butterfly_cb, 0, sizeof(butterfly_cb));
+	butterfly_cb.private = pp;
+	pd = parport_register_dev_model(p, "spi_butterfly", &butterfly_cb, 0);
 	if (!pd) {
 		status = -ENOMEM;
 		goto clean0;
@@ -262,7 +255,6 @@ static void butterfly_attach(struct parport *p)
 	parport_write_data(pp->port, pp->lastbyte);
 	msleep(100);
 
-
 	/*
 	 * Start SPI ... for now, hide that we're two physical busses.
 	 */
@@ -297,7 +289,7 @@ static void butterfly_attach(struct parport *p)
 clean1:
 	parport_unregister_device(pd);
 clean0:
-	(void) spi_master_put(pp->bitbang.master);
+	spi_master_put(pp->bitbang.master);
 done:
 	pr_debug("%s: butterfly probe, fail %d\n", p->name, status);
 }
@@ -325,16 +317,16 @@ static void butterfly_detach(struct parport *p)
 	parport_release(pp->pd);
 	parport_unregister_device(pp->pd);
 
-	(void) spi_master_put(pp->bitbang.master);
+	spi_master_put(pp->bitbang.master);
 }
 
 static struct parport_driver butterfly_driver = {
 	.name =		"spi_butterfly",
-	.attach =	butterfly_attach,
+	.match_port =	butterfly_attach,
 	.detach =	butterfly_detach,
+	.devmodel = true,
 };
 
-
 static int __init butterfly_init(void)
 {
 	return parport_register_driver(&butterfly_driver);

drivers/spi/spi-cadence.c

@@ -617,8 +617,7 @@ static int cdns_spi_remove(struct platform_device *pdev)
  */
 static int __maybe_unused cdns_spi_suspend(struct device *dev)
 {
-	struct platform_device *pdev = container_of(dev,
-			struct platform_device, dev);
+	struct platform_device *pdev = to_platform_device(dev);
 	struct spi_master *master = platform_get_drvdata(pdev);
 	struct cdns_spi *xspi = spi_master_get_devdata(master);
 
@@ -641,8 +640,7 @@ static int __maybe_unused cdns_spi_suspend(struct device *dev)
  */
 static int __maybe_unused cdns_spi_resume(struct device *dev)
 {
-	struct platform_device *pdev = container_of(dev,
-			struct platform_device, dev);
+	struct platform_device *pdev = to_platform_device(dev);
 	struct spi_master *master = platform_get_drvdata(pdev);
 	struct cdns_spi *xspi = spi_master_get_devdata(master);
 	int ret = 0;

drivers/spi/spi-davinci.c

@@ -477,33 +477,33 @@ static int davinci_spi_check_error(struct davinci_spi *dspi, int int_status)
 	struct device *sdev = dspi->bitbang.master->dev.parent;
 
 	if (int_status & SPIFLG_TIMEOUT_MASK) {
-		dev_dbg(sdev, "SPI Time-out Error\n");
+		dev_err(sdev, "SPI Time-out Error\n");
 		return -ETIMEDOUT;
 	}
 	if (int_status & SPIFLG_DESYNC_MASK) {
-		dev_dbg(sdev, "SPI Desynchronization Error\n");
+		dev_err(sdev, "SPI Desynchronization Error\n");
 		return -EIO;
 	}
 	if (int_status & SPIFLG_BITERR_MASK) {
-		dev_dbg(sdev, "SPI Bit error\n");
+		dev_err(sdev, "SPI Bit error\n");
 		return -EIO;
 	}
 
 	if (dspi->version == SPI_VERSION_2) {
 		if (int_status & SPIFLG_DLEN_ERR_MASK) {
-			dev_dbg(sdev, "SPI Data Length Error\n");
+			dev_err(sdev, "SPI Data Length Error\n");
 			return -EIO;
 		}
 		if (int_status & SPIFLG_PARERR_MASK) {
-			dev_dbg(sdev, "SPI Parity Error\n");
+			dev_err(sdev, "SPI Parity Error\n");
 			return -EIO;
 		}
 		if (int_status & SPIFLG_OVRRUN_MASK) {
-			dev_dbg(sdev, "SPI Data Overrun error\n");
+			dev_err(sdev, "SPI Data Overrun error\n");
 			return -EIO;
 		}
 		if (int_status & SPIFLG_BUF_INIT_ACTIVE_MASK) {
-			dev_dbg(sdev, "SPI Buffer Init Active\n");
+			dev_err(sdev, "SPI Buffer Init Active\n");
 			return -EBUSY;
 		}
 	}
@@ -703,7 +703,8 @@ static int davinci_spi_bufs(struct spi_device *spi, struct spi_transfer *t)
 
 	/* Wait for the transfer to complete */
 	if (spicfg->io_type != SPI_IO_TYPE_POLL) {
-		wait_for_completion_interruptible(&(dspi->done));
+		if (wait_for_completion_timeout(&dspi->done, HZ) == 0)
+			errors = SPIFLG_TIMEOUT_MASK;
 	} else {
 		while (dspi->rcount > 0 || dspi->wcount > 0) {
 			errors = davinci_spi_process_events(dspi);