Commit 3c35e79c authored by Dan Murphy's avatar Dan Murphy Committed by Mark Brown

ASoC: tlv320adcx140: Add support for configuring GPI pins

Add support to configure the GPI pins to the specific configuration.
The pins can be disabled or be configured as data input for any of the
digital mic channels.  In addition the GPI can be used a a general
purpose input, a Master clock input or an ASI input for daisy chaining
devices.
Signed-off-by: default avatarDan Murphy <dmurphy@ti.com>
Link: https://lore.kernel.org/r/20200526200917.10385-2-dmurphy@ti.comSigned-off-by: default avatarMark Brown <broonie@kernel.org>
parent 2465d32b
...@@ -764,6 +764,9 @@ static int adcx140_codec_probe(struct snd_soc_component *component) ...@@ -764,6 +764,9 @@ static int adcx140_codec_probe(struct snd_soc_component *component)
int pdm_count; int pdm_count;
u32 pdm_edges[ADCX140_NUM_PDM_EDGES]; u32 pdm_edges[ADCX140_NUM_PDM_EDGES];
u32 pdm_edge_val = 0; u32 pdm_edge_val = 0;
int gpi_count;
u32 gpi_inputs[ADCX140_NUM_GPI_PINS];
u32 gpi_input_val = 0;
int i; int i;
int ret; int ret;
...@@ -809,6 +812,31 @@ static int adcx140_codec_probe(struct snd_soc_component *component) ...@@ -809,6 +812,31 @@ static int adcx140_codec_probe(struct snd_soc_component *component)
return ret; return ret;
} }
gpi_count = device_property_count_u32(adcx140->dev, "ti,gpi-config");
if (gpi_count <= ADCX140_NUM_GPI_PINS && gpi_count > 0) {
ret = device_property_read_u32_array(adcx140->dev,
"ti,gpi-config",
gpi_inputs, gpi_count);
if (ret)
return ret;
gpi_input_val = gpi_inputs[ADCX140_GPI1_INDEX] << ADCX140_GPI_SHIFT |
gpi_inputs[ADCX140_GPI2_INDEX];
ret = regmap_write(adcx140->regmap, ADCX140_GPI_CFG0,
gpi_input_val);
if (ret)
return ret;
gpi_input_val = gpi_inputs[ADCX140_GPI3_INDEX] << ADCX140_GPI_SHIFT |
gpi_inputs[ADCX140_GPI4_INDEX];
ret = regmap_write(adcx140->regmap, ADCX140_GPI_CFG1,
gpi_input_val);
if (ret)
return ret;
}
ret = adcx140_reset(adcx140); ret = adcx140_reset(adcx140);
if (ret) if (ret)
goto out; goto out;
......
...@@ -132,4 +132,11 @@ ...@@ -132,4 +132,11 @@
#define ADCX140_NUM_PDM_EDGES 4 #define ADCX140_NUM_PDM_EDGES 4
#define ADCX140_PDM_EDGE_SHIFT 7 #define ADCX140_PDM_EDGE_SHIFT 7
#define ADCX140_NUM_GPI_PINS 4
#define ADCX140_GPI_SHIFT 4
#define ADCX140_GPI1_INDEX 0
#define ADCX140_GPI2_INDEX 1
#define ADCX140_GPI3_INDEX 2
#define ADCX140_GPI4_INDEX 3
#endif /* _TLV320ADCX140_ */ #endif /* _TLV320ADCX140_ */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment