Merge bk://bk.arm.linux.org.uk/linux-2.6-serial

into home.osdl.org:/home/torvalds/v2.5/linux

drivers/serial/8250.c

@@ -122,6 +122,7 @@ struct uart_8250_port {
 	struct uart_port	port;
 	struct timer_list	timer;		/* "no irq" timer */
 	struct list_head	list;		/* ports on this IRQ */
+	unsigned int		capabilities;	/* port capabilities */
 	unsigned short		rev;
 	unsigned char		acr;
 	unsigned char		ier;
@@ -683,6 +684,7 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags)
 	serial_outp(up, UART_LCR, save_lcr);
 
 	up->port.fifosize = uart_config[up->port.type].dfl_xmit_fifo_size;
+	up->capabilities = uart_config[up->port.type].flags;
 
 	if (up->port.type == PORT_UNKNOWN)
 		goto out;
@@ -1190,6 +1192,8 @@ static int serial8250_startup(struct uart_port *port)
 	unsigned long flags;
 	int retval;
 
+	up->capabilities = uart_config[up->port.type].flags;
+
 	if (up->port.type == PORT_16C950) {
 		/* Wake up and initialize UART */
 		up->acr = 0;
@@ -1215,7 +1219,7 @@ static int serial8250_startup(struct uart_port *port)
 	 * Clear the FIFO buffers and disable them.
 	 * (they will be reeanbled in set_termios())
 	 */
-	if (uart_config[up->port.type].flags & UART_CLEAR_FIFO) {
+	if (up->capabilities & UART_CLEAR_FIFO) {
 		serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
 		serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO |
 				UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
@@ -1428,7 +1432,7 @@ serial8250_set_termios(struct uart_port *port, struct termios *termios,
 	    up->rev == 0x5201)
 		quot ++;
 
-	if (uart_config[up->port.type].flags & UART_USE_FIFO) {
+	if (up->capabilities & UART_USE_FIFO) {
 		if (baud < 2400)
 			fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1;
 #ifdef CONFIG_SERIAL_8250_RSA
@@ -1489,13 +1493,13 @@ serial8250_set_termios(struct uart_port *port, struct termios *termios,
 
 	serial_out(up, UART_IER, up->ier);
 
-	if (uart_config[up->port.type].flags & UART_STARTECH) {
+	if (up->capabilities & UART_STARTECH) {
 		serial_outp(up, UART_LCR, 0xBF);
 		serial_outp(up, UART_EFR,
 			    termios->c_cflag & CRTSCTS ? UART_EFR_CTS :0);
 	}
 
-	if (uart_config[up->port.type].flags & UART_NATSEMI) {
+	if (up->capabilities & UART_NATSEMI) {
 		/* Switch to bank 2 not bank 1, to avoid resetting EXCR2 */
 		serial_outp(up, UART_LCR, 0xe0);
 	} else {
@@ -1524,7 +1528,7 @@ serial8250_pm(struct uart_port *port, unsigned int state,
 	struct uart_8250_port *up = (struct uart_8250_port *)port;
 	if (state) {
 		/* sleep */
-		if (uart_config[up->port.type].flags & UART_STARTECH) {
+		if (up->capabilities & UART_STARTECH) {
 			/* Arrange to enter sleep mode */
 			serial_outp(up, UART_LCR, 0xBF);
 			serial_outp(up, UART_EFR, UART_EFR_ECB);
@@ -1543,7 +1547,7 @@ serial8250_pm(struct uart_port *port, unsigned int state,
 			up->pm(port, state, oldstate);
 	} else {
 		/* wake */
-		if (uart_config[up->port.type].flags & UART_STARTECH) {
+		if (up->capabilities & UART_STARTECH) {
 			/* Wake up UART */
 			serial_outp(up, UART_LCR, 0xBF);
 			serial_outp(up, UART_EFR, UART_EFR_ECB);
@@ -2101,9 +2105,9 @@ void serial8250_get_irq_map(unsigned int *map)
  *
  *	Suspend one serial port.
  */
-void serial8250_suspend_port(int line, u32 level)
+void serial8250_suspend_port(int line)
 {
-	uart_suspend_port(&serial8250_reg, &serial8250_ports[line].port, level);
+	uart_suspend_port(&serial8250_reg, &serial8250_ports[line].port);
 }
 
 /**
@@ -2112,9 +2116,9 @@ void serial8250_suspend_port(int line, u32 level)
  *
  *	Resume one serial port.
  */
-void serial8250_resume_port(int line, u32 level)
+void serial8250_resume_port(int line)
 {
-	uart_resume_port(&serial8250_reg, &serial8250_ports[line].port, level);
+	uart_resume_port(&serial8250_reg, &serial8250_ports[line].port);
 }
 
 static int __init serial8250_init(void)

drivers/serial/8250.h

@@ -27,8 +27,8 @@ struct serial8250_probe {
 int serial8250_register_probe(struct serial8250_probe *probe);
 void serial8250_unregister_probe(struct serial8250_probe *probe);
 void serial8250_get_irq_map(unsigned int *map);
-void serial8250_suspend_port(int line, u32 level);
-void serial8250_resume_port(int line, u32 level);
+void serial8250_suspend_port(int line);
+void serial8250_resume_port(int line);
 
 struct old_serial_port {
 	unsigned int uart;

drivers/serial/8250_pci.c

@@ -1600,19 +1600,6 @@ static void __devexit pciserial_remove_one(struct pci_dev *dev)
 	}
 }
 
-static int pciserial_save_state_one(struct pci_dev *dev, u32 state)
-{
-	struct serial_private *priv = pci_get_drvdata(dev);
-
-	if (priv) {
-		int i;
-
-		for (i = 0; i < priv->nr; i++)
-			serial8250_suspend_port(priv->line[i], SUSPEND_SAVE_STATE);
-	}
-	return 0;
-}
-
 static int pciserial_suspend_one(struct pci_dev *dev, u32 state)
 {
 	struct serial_private *priv = pci_get_drvdata(dev);
@@ -1621,7 +1608,7 @@ static int pciserial_suspend_one(struct pci_dev *dev, u32 state)
 		int i;
 
 		for (i = 0; i < priv->nr; i++)
-			serial8250_suspend_port(priv->line[i], SUSPEND_POWER_DOWN);
+			serial8250_suspend_port(priv->line[i]);
 	}
 	return 0;
 }
@@ -1639,10 +1626,8 @@ static int pciserial_resume_one(struct pci_dev *dev)
 		if (priv->quirk->init)
 			priv->quirk->init(dev);
 
-		for (i = 0; i < priv->nr; i++) {
-			serial8250_resume_port(priv->line[i], RESUME_POWER_ON);
-			serial8250_resume_port(priv->line[i], RESUME_RESTORE_STATE);
-		}
+		for (i = 0; i < priv->nr; i++)
+			serial8250_resume_port(priv->line[i]);
 	}
 	return 0;
 }
@@ -2040,7 +2025,6 @@ static struct pci_driver serial_pci_driver = {
 	.name		= "serial",
 	.probe		= pciserial_init_one,
 	.remove		= __devexit_p(pciserial_remove_one),
-	.save_state	= pciserial_save_state_one,
 	.suspend	= pciserial_suspend_one,
 	.resume		= pciserial_resume_one,
 	.id_table	= serial_pci_tbl,

drivers/serial/Kconfig

@@ -10,6 +10,7 @@ menu "Serial drivers"
 # The new 8250/16550 serial drivers
 config SERIAL_8250
 	tristate "8250/16550 and compatible serial support"
+	select SERIAL_CORE
 	---help---
 	  This selects whether you want to include the driver for the standard
 	  serial ports.  The standard answer is Y.  People who might say N
@@ -41,6 +42,7 @@ config SERIAL_8250
 config SERIAL_8250_CONSOLE
 	bool "Console on 8250/16550 and compatible serial port"
 	depends on SERIAL_8250=y
+	select SERIAL_CORE_CONSOLE
 	---help---
 	  If you say Y here, it will be possible to use a serial port as the
 	  system console (the system console is the device which receives all
@@ -167,12 +169,14 @@ config SERIAL_8250_ACORN
 config SERIAL_ANAKIN
 	bool "Anakin serial port support"
 	depends on ARM && ARCH_ANAKIN
+	select SERIAL_CORE
 	help
 	  ::: To be written :::
 
 config SERIAL_ANAKIN_CONSOLE
 	bool "Console on Anakin serial port"
 	depends on SERIAL_ANAKIN
+	select SERIAL_CORE_CONSOLE
 	help
 	  Even if you say Y here, the currently visible virtual console
 	  (/dev/tty0) will still be used as the system console by default, but
@@ -190,7 +194,8 @@ config ANAKIN_DEFAULT_BAUDRATE
 
 config SERIAL_AMBA
 	tristate "ARM AMBA serial port support"
-	depends on ARM && ARCH_INTEGRATOR
+	depends on ARM_AMBA
+	select SERIAL_CORE
 	help
 	  This selects the ARM(R) AMBA(R) PrimeCell UART.  If you have an
 	  Integrator platform, say Y or M here.
@@ -200,6 +205,7 @@ config SERIAL_AMBA
 config SERIAL_AMBA_CONSOLE
 	bool "Support for console on AMBA serial port"
 	depends on SERIAL_AMBA=y
+	select SERIAL_CORE_CONSOLE
 	---help---
 	  Say Y here if you wish to use an AMBA PrimeCell UART as the system
 	  console (the system console is the device which receives all kernel
@@ -214,18 +220,20 @@ config SERIAL_AMBA_CONSOLE
 
 config SERIAL_INTEGRATOR
 	bool
-	depends on SERIAL_AMBA=y
+	depends on SERIAL_AMBA && ARCH_INTEGRATOR
 	default y
 
 config SERIAL_CLPS711X
 	tristate "CLPS711X serial port support"
 	depends on ARM && ARCH_CLPS711X
+	select SERIAL_CORE
 	help
 	  ::: To be written :::
 
 config SERIAL_CLPS711X_CONSOLE
 	bool "Support for console on CLPS711X serial port"
 	depends on SERIAL_CLPS711X=y
+	select SERIAL_CORE_CONSOLE
 	help
 	  Even if you say Y here, the currently visible virtual console
 	  (/dev/tty0) will still be used as the system console by default, but
@@ -243,6 +251,7 @@ config SERIAL_CLPS711X_OLD_NAME
 config SERIAL_21285
 	tristate "DC21285 serial port support"
 	depends on ARM && FOOTBRIDGE
+	select SERIAL_CORE
 	help
 	  If you have a machine based on a 21285 (Footbridge) StrongARM(R)/
 	  PCI bridge you can enable its onboard serial port by enabling this
@@ -258,6 +267,7 @@ config SERIAL_21285_OLD
 config SERIAL_21285_CONSOLE
 	bool "Console on DC21285 serial port"
 	depends on SERIAL_21285=y
+	select SERIAL_CORE_CONSOLE
 	help
 	  If you have enabled the serial port on the 21285 footbridge you can
 	  make it the console by answering Y to this option.
@@ -272,6 +282,7 @@ config SERIAL_21285_CONSOLE
 config SERIAL_UART00
 	bool "Excalibur serial port (uart00) support"
 	depends on ARM && ARCH_CAMELOT
+	select SERIAL_CORE
 	help
 	  Say Y here if you want to use the hard logic uart on Excalibur. This
 	  driver also supports soft logic implentations of this uart core.
@@ -279,6 +290,7 @@ config SERIAL_UART00
 config SERIAL_UART00_CONSOLE
 	bool "Support for console on Excalibur serial port"
 	depends on SERIAL_UART00
+	select SERIAL_CORE_CONSOLE
 	help
 	  Say Y here if you want to support a serial console on an Excalibur
 	  hard logic uart or uart00 IP core.
@@ -293,6 +305,7 @@ config SERIAL_UART00_CONSOLE
 config SERIAL_SA1100
 	bool "SA1100 serial port support"
 	depends on ARM && ARCH_SA1100
+	select SERIAL_CORE
 	help
 	  If you have a machine based on a SA1100/SA1110 StrongARM(R) CPU you
 	  can enable its onboard serial port by enabling this option.
@@ -302,6 +315,7 @@ config SERIAL_SA1100
 config SERIAL_SA1100_CONSOLE
 	bool "Console on SA1100 serial port"
 	depends on SERIAL_SA1100
+	select SERIAL_CORE_CONSOLE
 	help
 	  If you have enabled the serial port on the SA1100/SA1110 StrongARM
 	  CPU you can make it the console by answering Y to this option.
@@ -316,6 +330,8 @@ config SERIAL_SA1100_CONSOLE
 config SERIAL_SUNCORE
 	bool
 	depends on SPARC32 || SPARC64
+	select SERIAL_CORE
+	select SERIAL_CORE_CONSOLE
 	default y
 
 config SERIAL_SUNZILOG
@@ -352,6 +368,7 @@ config SERIAL_SUNSU_CONSOLE
 config SERIAL_MUX
 	tristate "Serial MUX support"
 	depends on PARISC
+	select SERIAL_CORE
 	default y
 	---help---
 	  Saying Y here will enable the hardware MUX serial driver for
@@ -369,6 +386,7 @@ config SERIAL_MUX
 config SERIAL_MUX_CONSOLE
         bool "Support for console on serial MUX"
         depends on SERIAL_MUX
+	select SERIAL_CORE_CONSOLE
         default y
 
 config PDC_CONSOLE
@@ -406,6 +424,7 @@ config SERIAL_SUNSAB_CONSOLE
 config V850E_UART
 	bool "NEC V850E on-chip UART support"
 	depends on V850E_MA1 || V850E_ME2 || V850E_TEG || V850E2_ANNA || V850E_AS85EP1
+	select SERIAL_CORE
 	default y
 
 config V850E_UARTB
@@ -416,10 +435,12 @@ config V850E_UARTB
 config V850E_UART_CONSOLE
 	bool "Use NEC V850E on-chip UART for console"
 	depends on V850E_UART
+	select SERIAL_CORE_CONSOLE
 
 config SERIAL98
 	tristate "PC-9800 8251-based primary serial port support"
 	depends on X86_PC9800
+	select SERIAL_CORE
 	help
 	  If you want to use standard primary serial ports on PC-9800, 
 	  say Y.  Otherwise, say N.
@@ -427,16 +448,13 @@ config SERIAL98
 config SERIAL98_CONSOLE
         bool "Support for console on PC-9800 standard serial port"
         depends on SERIAL98=y
+	select SERIAL_CORE_CONSOLE
 
 config SERIAL_CORE
 	tristate
-	default m if SERIAL_AMBA!=y && SERIAL_CLPS711X!=y && SERIAL_21285!=y && !SERIAL_SA1100 && !SERIAL_ANAKIN && !SERIAL_UART00 && SERIAL_8250!=y && SERIAL_MUX!=y && !SERIAL_ROCKETPORT && !SERIAL_SUNCORE && !V850E_UART && SERIAL_PMACZILOG!=y && (SERIAL_AMBA=m || SERIAL_CLPS711X=m || SERIAL_21285=m || SERIAL_8250=m || SERIAL_MUX=m || SERIAL98=m || SERIAL_PMACZILOG=m)
-	default y if SERIAL_AMBA=y || SERIAL_CLPS711X=y || SERIAL_21285=y || SERIAL_SA1100 || SERIAL_ANAKIN || SERIAL_UART00 || SERIAL_8250=y || SERIAL_MUX=y || SERIAL_ROCKETPORT || SERIAL_SUNCORE || V850E_UART || SERIAL98=y || SERIAL_PMACZILOG=y
 
 config SERIAL_CORE_CONSOLE
 	bool
-	depends on SERIAL_AMBA_CONSOLE || SERIAL_CLPS711X_CONSOLE || SERIAL_21285_CONSOLE || SERIAL_SA1100_CONSOLE || SERIAL_ANAKIN_CONSOLE || SERIAL_UART00_CONSOLE || SERIAL_8250_CONSOLE || SERIAL_MUX_CONSOLE || SERIAL_SUNZILOG_CONSOLE || SERIAL_SUNSU_CONSOLE || SERIAL_SUNSAB_CONSOLE || V850E_UART_CONSOLE || SERIAL98_CONSOLE || SERIAL_PMACZILOG_CONSOLE
-	default y
 
 config SERIAL_68328
 	bool "68328 serial support"
@@ -476,6 +494,7 @@ config SERIAL_68360
 config SERIAL_PMACZILOG
 	tristate "PowerMac z85c30 ESCC support"
 	depends on PPC_OF
+	select SERIAL_CORE
 	help
 	  This driver supports the Zilog z85C30 serial ports found on
 	  PowerMac machines.
@@ -484,6 +503,7 @@ config SERIAL_PMACZILOG
 config SERIAL_PMACZILOG_CONSOLE
 	bool "Console on PowerMac z85c30 serial port"
 	depends on SERIAL_PMACZILOG=y
+	select SERIAL_CORE_CONSOLE
 	help
 	  If you would like to be able to use the z85c30 serial port
 	  on your PowerMac as the console, you can do so by answering

drivers/serial/Makefile

@@ -11,10 +11,10 @@ serial-8250-$(CONFIG_PNP) += 8250_pnp.o
 serial-8250-$(CONFIG_SERIAL_8250_HCDP) += 8250_hcdp.o
 serial-8250-$(CONFIG_SERIAL_8250_ACPI) += 8250_acpi.o
 
-obj-$(CONFIG_SERIAL_CORE) += core.o
+obj-$(CONFIG_SERIAL_CORE) += serial_core.o
 obj-$(CONFIG_SERIAL_21285) += 21285.o
 obj-$(CONFIG_SERIAL_8250) += 8250.o $(serial-8250-y)
-obj-$(CONFIG_SERIAL_8250_CS) += 8250_cs.o
+obj-$(CONFIG_SERIAL_8250_CS) += serial_cs.o
 obj-$(CONFIG_SERIAL_8250_ACORN) += 8250_acorn.o
 obj-$(CONFIG_SERIAL_ANAKIN) += anakin.o
 obj-$(CONFIG_SERIAL_AMBA) += amba.o

drivers/serial/clps711x.c

@@ -104,7 +104,7 @@ static void clps711xuart_enable_ms(struct uart_port *port)
 {
 }
 
-static void clps711xuart_int_rx(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t clps711xuart_int_rx(int irq, void *dev_id, struct pt_regs *regs)
 {
 	struct uart_port *port = dev_id;
 	struct tty_struct *tty = port->info->tty;
@@ -139,7 +139,7 @@ static void clps711xuart_int_rx(int irq, void *dev_id, struct pt_regs *regs)
 	}
  out:
 	tty_flip_buffer_push(tty);
-	return;
+	return IRQ_HANDLED;
 
  handle_error:
 	if (ch & UARTDR_PARERR)
@@ -180,7 +180,7 @@ static void clps711xuart_int_rx(int irq, void *dev_id, struct pt_regs *regs)
 	goto error_return;
 }
 
-static void clps711xuart_int_tx(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t clps711xuart_int_tx(int irq, void *dev_id, struct pt_regs *regs)
 {
 	struct uart_port *port = dev_id;
 	struct circ_buf *xmit = &port->info->xmit;
@@ -190,11 +190,11 @@ static void clps711xuart_int_tx(int irq, void *dev_id, struct pt_regs *regs)
 		clps_writel(port->x_char, UARTDR(port));
 		port->icount.tx++;
 		port->x_char = 0;
-		return;
+		return IRQ_HANDLED;
 	}
 	if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
 		clps711xuart_stop_tx(port, 0);
-		return;
+		return IRQ_HANDLED;
 	}
 
 	count = port->fifosize >> 1;
@@ -211,6 +211,8 @@ static void clps711xuart_int_tx(int irq, void *dev_id, struct pt_regs *regs)
 
 	if (uart_circ_empty(xmit))
 		clps711xuart_stop_tx(port, 0);
+
+	return IRQ_HANDLED;
 }
 
 static unsigned int clps711xuart_tx_empty(struct uart_port *port)

drivers/serial/sa1100.c

@@ -862,8 +862,8 @@ static int sa1100_serial_suspend(struct device *_dev, u32 state, u32 level)
 {
 	struct sa1100_port *sport = dev_get_drvdata(_dev);
 
-	if (sport)
-		uart_suspend_port(&sa1100_reg, &sport->port, level);
+	if (sport && level == SUSPEND_DISABLE)
+		uart_suspend_port(&sa1100_reg, &sport->port);
 
 	return 0;
 }
@@ -872,8 +872,8 @@ static int sa1100_serial_resume(struct device *_dev, u32 level)
 {
 	struct sa1100_port *sport = dev_get_drvdata(_dev);
 
-	if (sport)
-		uart_resume_port(&sa1100_reg, &sport->port, level);
+	if (sport && level == RESUME_ENABLE)
+		uart_resume_port(&sa1100_reg, &sport->port);
 
 	return 0;
 }

drivers/serial/core.c → drivers/serial/serial_core.c

@@ -1875,84 +1875,72 @@ static void uart_change_pm(struct uart_state *state, int pm_state)
 	state->pm_state = pm_state;
 }
 
-int uart_suspend_port(struct uart_driver *drv, struct uart_port *port, u32 level)
+int uart_suspend_port(struct uart_driver *drv, struct uart_port *port)
 {
 	struct uart_state *state = drv->state + port->line;
 
 	down(&state->sem);
 
-	switch (level) {
-	case SUSPEND_SAVE_STATE:
-		if (state->info && state->info->flags & UIF_INITIALIZED) {
-			struct uart_ops *ops = port->ops;
+	if (state->info && state->info->flags & UIF_INITIALIZED) {
+		struct uart_ops *ops = port->ops;
 
-			spin_lock_irq(&port->lock);
-			ops->stop_tx(port, 0);
-			ops->set_mctrl(port, 0);
-			ops->stop_rx(port);
-			spin_unlock_irq(&port->lock);
-
-			/*
-			 * Wait for the transmitter to empty.
-			 */
-			while (!ops->tx_empty(port)) {
-				set_current_state(TASK_UNINTERRUPTIBLE);
-				schedule_timeout(10*HZ/1000);
-			}
-			set_current_state(TASK_RUNNING);
-
-			ops->shutdown(port);
-		}
-		break;
+		spin_lock_irq(&port->lock);
+		ops->stop_tx(port, 0);
+		ops->set_mctrl(port, 0);
+		ops->stop_rx(port);
+		spin_unlock_irq(&port->lock);
 
-	case SUSPEND_POWER_DOWN:
 		/*
-		 * Disable the console device before suspending.
+		 * Wait for the transmitter to empty.
 		 */
-		if (uart_console(port))
-			port->cons->flags &= ~CON_ENABLED;
+		while (!ops->tx_empty(port)) {
+			set_current_state(TASK_UNINTERRUPTIBLE);
+			schedule_timeout(10*HZ/1000);
+		}
+		set_current_state(TASK_RUNNING);
 
-		uart_change_pm(state, 3);
-		break;
+		ops->shutdown(port);
 	}
 
+	/*
+	 * Disable the console device before suspending.
+	 */
+	if (uart_console(port))
+		port->cons->flags &= ~CON_ENABLED;
+
+	uart_change_pm(state, 3);
+
 	up(&state->sem);
 
 	return 0;
 }
 
-int uart_resume_port(struct uart_driver *drv, struct uart_port *port, u32 level)
+int uart_resume_port(struct uart_driver *drv, struct uart_port *port)
 {
 	struct uart_state *state = drv->state + port->line;
 
 	down(&state->sem);
 
-	switch (level) {
-	case RESUME_POWER_ON:
-		uart_change_pm(state, 0);
+	uart_change_pm(state, 0);
 
-		/*
-		 * Re-enable the console device after suspending.
-		 */
-		if (uart_console(port)) {
-			uart_change_speed(state, NULL);
-			port->cons->flags |= CON_ENABLED;
-		}
-		break;
+	/*
+	 * Re-enable the console device after suspending.
+	 */
+	if (uart_console(port)) {
+		uart_change_speed(state, NULL);
+		port->cons->flags |= CON_ENABLED;
+	}
 
-	case RESUME_RESTORE_STATE:
-		if (state->info && state->info->flags & UIF_INITIALIZED) {
-			struct uart_ops *ops = port->ops;
+	if (state->info && state->info->flags & UIF_INITIALIZED) {
+		struct uart_ops *ops = port->ops;
 
-			ops->set_mctrl(port, 0);
-			ops->startup(port);
-			uart_change_speed(state, NULL);
-			spin_lock_irq(&port->lock);
-			ops->set_mctrl(port, port->mctrl);
-			ops->start_tx(port, 0);
-			spin_unlock_irq(&port->lock);
-		}
-		break;
+		ops->set_mctrl(port, 0);
+		ops->startup(port);
+		uart_change_speed(state, NULL);
+		spin_lock_irq(&port->lock);
+		ops->set_mctrl(port, port->mctrl);
+		ops->start_tx(port, 0);
+		spin_unlock_irq(&port->lock);
 	}
 
 	up(&state->sem);

include/linux/serial_core.h

@@ -67,6 +67,12 @@
 #define PORT_PC9861	45
 #define PORT_PC9801_101	46
 
+/* DZ */
+#define PORT_DZ		47
+
+/* Parisc type numbers. */
+#define PORT_MUX	48
+
 /* Macintosh Zilog type numbers */
 #define PORT_MAC_ZILOG	50	/* m68k : not yet implemented */
 #define PORT_PMAC_ZILOG	51
@@ -319,8 +325,8 @@ int uart_remove_one_port(struct uart_driver *reg, struct uart_port *port);
 /*
  * Power Management
  */
-int uart_suspend_port(struct uart_driver *reg, struct uart_port *port, u32 level);
-int uart_resume_port(struct uart_driver *reg, struct uart_port *port, u32 level);
+int uart_suspend_port(struct uart_driver *reg, struct uart_port *port);
+int uart_resume_port(struct uart_driver *reg, struct uart_port *port);
 
 #define uart_circ_empty(circ)		((circ)->head == (circ)->tail)
 #define uart_circ_clear(circ)		((circ)->head = (circ)->tail = 0)