Merge tag 'usb-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB updates from Greg KH:
 "Here is the big USB patchset for 4.4-rc1.

  As usual, most of the changes are in the gadget subsystem, and we
  removed a host controller for a device that is no longer in existance,
  and probably never was even made public.  There is also other minor
  driver updates and new device ids, full details in the changelog.

  All of these have been in linux-next for a while"

* tag 'usb-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (233 commits)
  USB: core: Codestyle fix in urb.c
  usb: misc: usb3503: Use i2c_add_driver helper macro
  usb: host: lpc32xx: don't unregister phy device
  usb: host: lpc32xx: balance clk enable/disable on removal
  usb: host: lpc32xx: fix warnings caused by enabling unprepared clock
  uwb: drp: Use setup_timer
  uwb: neh: Use setup_timer
  uwb: rsv: Use setup_timer
  USB: qcserial: add Sierra Wireless MC74xx/EM74xx
  usb: chipidea: otg: don't wait vbus drops below BSV when starts host
  chipidea: ci_hdrc_pci: use PCI_VDEVICE() instead of PCI_DEVICE()
  doc: dt-binding: ci-hdrc-usb2: split vendor specific properties
  usb: chipidea: imx: add imx6ul usb support
  doc: dt-binding: ci-hdrc-usb2: improve property description
  usb: chipidea: imx: add usb support for imx7d
  Doc: usb: ci-hdrc-usb2: Add phy-clkgate-delay-us entry
  usb: chipidea: Add support for 'phy-clkgate-delay-us' property
  usb: chipidea: Use extcon framework for VBUS and ID detect
  usb: gadget: net2280: restore ep_cfg after defect7374 workaround
  usb: dwc2: host: Fix use after free w/ simultaneous irqs
  ...

Documentation/ABI/testing/sysfs-bus-usb

+What:		/sys/bus/usb/devices/INTERFACE/authorized
+Date:		August 2015
+Description:
+		This allows to authorize (1) or deauthorize (0)
+		individual interfaces instead a whole device
+		in contrast to the device authorization.
+		If a deauthorized interface will be authorized
+		so the driver probing must be triggered manually
+		by writing INTERFACE to /sys/bus/usb/drivers_probe
+		This allows to avoid side-effects with drivers
+		that need multiple interfaces.
+		A deauthorized interface cannot be probed or claimed.
+
+What:		/sys/bus/usb/devices/usbX/interface_authorized_default
+Date:		August 2015
+Description:
+		This is used as value that determines if interfaces
+		would be authorized by default.
+		The value can be 1 or 0. It's by default 1.
+
 What:		/sys/bus/usb/device/.../authorized
 Date:		July 2008
 KernelVersion:	2.6.26

Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt

+Broadcom Cygnus PCIe PHY
+
+Required properties:
+- compatible: must be "brcm,cygnus-pcie-phy"
+- reg: base address and length of the PCIe PHY block
+- #address-cells: must be 1
+- #size-cells: must be 0
+
+Each PCIe PHY should be represented by a child node
+
+Required properties For the child node:
+- reg: the PHY ID
+0 - PCIe RC 0
+1 - PCIe RC 1
+- #phy-cells: must be 0
+
+Example:
+	pcie_phy: phy@0301d0a0 {
+		compatible = "brcm,cygnus-pcie-phy";
+		reg = <0x0301d0a0 0x14>;
+
+		pcie0_phy: phy@0 {
+			reg = <0>;
+			#phy-cells = <0>;
+		};
+
+		pcie1_phy: phy@1 {
+			reg = <1>;
+			#phy-cells = <0>;
+		};
+	};
+
+	/* users of the PCIe phy */
+
+	pcie0: pcie@18012000 {
+		...
+		...
+		phys = <&pcie0_phy>;
+		phy-names = "pcie-phy";
+	};
+
+	pcie1: pcie@18013000 {
+		...
+		...
+		phys = <pcie1_phy>;
+		phy-names = "pcie-phy";
+	};

Documentation/devicetree/bindings/phy/phy-mt65xx-usb.txt

+mt65xx USB3.0 PHY binding
+--------------------------
+
+This binding describes a usb3.0 phy for mt65xx platforms of Medaitek SoC.
+
+Required properties (controller (parent) node):
+ - compatible	: should be "mediatek,mt8173-u3phy"
+ - reg		: offset and length of register for phy, exclude port's
+		  register.
+ - clocks	: a list of phandle + clock-specifier pairs, one for each
+		  entry in clock-names
+ - clock-names	: must contain
+		  "u3phya_ref": for reference clock of usb3.0 analog phy.
+
+Required nodes	: a sub-node is required for each port the controller
+		  provides. Address range information including the usual
+		  'reg' property is used inside these nodes to describe
+		  the controller's topology.
+
+Required properties (port (child) node):
+- reg		: address and length of the register set for the port.
+- #phy-cells	: should be 1 (See second example)
+		  cell after port phandle is phy type from:
+			- PHY_TYPE_USB2
+			- PHY_TYPE_USB3
+
+Example:
+
+u3phy: usb-phy@11290000 {
+	compatible = "mediatek,mt8173-u3phy";
+	reg = <0 0x11290000 0 0x800>;
+	clocks = <&apmixedsys CLK_APMIXED_REF2USB_TX>;
+	clock-names = "u3phya_ref";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	ranges;
+	status = "okay";
+
+	phy_port0: port@11290800 {
+		reg = <0 0x11290800 0 0x800>;
+		#phy-cells = <1>;
+		status = "okay";
+	};
+
+	phy_port1: port@11291000 {
+		reg = <0 0x11291000 0 0x800>;
+		#phy-cells = <1>;
+		status = "okay";
+	};
+};
+
+Specifying phy control of devices
+---------------------------------
+
+Device nodes should specify the configuration required in their "phys"
+property, containing a phandle to the phy port node and a device type;
+phy-names for each port are optional.
+
+Example:
+
+#include <dt-bindings/phy/phy.h>
+
+usb30: usb@11270000 {
+	...
+	phys = <&phy_port0 PHY_TYPE_USB3>;
+	phy-names = "usb3-0";
+	...
+};

Documentation/devicetree/bindings/phy/samsung-phy.txt

@@ -44,6 +44,9 @@ Required properties:
 	- the "ref" clock is used to get the rate of the clock provided to the
 	  PHY module
 
+Optional properties:
+- vbus-supply: power-supply phandle for vbus power source
+
 The first phandle argument in the PHY specifier identifies the PHY, its
 meaning is compatible dependent. For the currently supported SoCs (Exynos 4210
 and Exynos 4212) it is as follows:

Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt

@@ -27,10 +27,6 @@ Optional properties:
 - vbus-supply: reference to the VBUS regulator
 - maximum-speed: limit the maximum connection speed to "full-speed".
 - tpl-support: TPL (Targeted Peripheral List) feature for targeted hosts
-- fsl,usbmisc: (FSL only) phandler of non-core register device, with one
-  argument that indicate usb controller index
-- disable-over-current: (FSL only) disable over current detect
-- external-vbus-divider: (FSL only) enables off-chip resistor divider for Vbus
 - itc-setting: interrupt threshold control register control, the setting
   should be aligned with ITC bits at register USBCMD.
 - ahb-burst-config: it is vendor dependent, the required value should be
@@ -41,11 +37,28 @@ Optional properties:
 - tx-burst-size-dword: it is vendor dependent, the tx burst size in dword
   (4 bytes), This register represents the maximum length of a the burst
   in 32-bit words while moving data from system memory to the USB
-  bus, changing this value takes effect only the SBUSCFG.AHBBRST is 0.
+  bus, the value of this property will only take effect if property
+  "ahb-burst-config" is set to 0, if this property is missing the reset
+  default of the hardware implementation will be used.
 - rx-burst-size-dword: it is vendor dependent, the rx burst size in dword
   (4 bytes), This register represents the maximum length of a the burst
   in 32-bit words while moving data from the USB bus to system memory,
-  changing this value takes effect only the SBUSCFG.AHBBRST is 0.
+  the value of this property will only take effect if property
+  "ahb-burst-config" is set to 0, if this property is missing the reset
+  default of the hardware implementation will be used.
+- extcon: phandles to external connector devices. First phandle should point to
+  external connector, which provide "USB" cable events, the second should point
+  to external connector device, which provide "USB-HOST" cable events. If one
+  of the external connector devices is not required, empty <0> phandle should
+  be specified.
+- phy-clkgate-delay-us: the delay time (us) between putting the PHY into
+  low power mode and gating the PHY clock.
+
+i.mx specific properties
+- fsl,usbmisc: phandler of non-core register device, with one
+  argument that indicate usb controller index
+- disable-over-current: disable over current detect
+- external-vbus-divider: enables off-chip resistor divider for Vbus
 
 Example:
 
@@ -62,4 +75,6 @@ Example:
 		ahb-burst-config = <0x0>;
 		tx-burst-size-dword = <0x10>; /* 64 bytes */
 		rx-burst-size-dword = <0x10>;
+		extcon = <0>, <&usb_id>;
+		phy-clkgate-delay-us = <400>;
 	};

Documentation/devicetree/bindings/usb/dwc3.txt

@@ -35,11 +35,16 @@ Optional properties:
 			LTSSM during USB3 Compliance mode.
  - snps,dis_u3_susphy_quirk: when set core will disable USB3 suspend phy.
  - snps,dis_u2_susphy_quirk: when set core will disable USB2 suspend phy.
+ - snps,dis_enblslpm_quirk: when set clears the enblslpm in GUSB2PHYCFG,
+			disabling the suspend signal to the PHY.
  - snps,is-utmi-l1-suspend: true when DWC3 asserts output signal
 			utmi_l1_suspend_n, false when asserts utmi_sleep_n
  - snps,hird-threshold: HIRD threshold
  - snps,hsphy_interface: High-Speed PHY interface selection between "utmi" for
    UTMI+ and "ulpi" for ULPI when the DWC_USB3_HSPHY_INTERFACE has value 3.
+ - snps,quirk-frame-length-adjustment: Value for GFLADJ_30MHZ field of GFLADJ
+	register for post-silicon frame length adjustment when the
+	fladj_30mhz_sdbnd signal is invalid or incorrect.
 
 This is usually a subnode to DWC3 glue to which it is connected.
 

Documentation/usb/authorization.txt

@@ -90,3 +90,34 @@ etc, but you get the idea. Anybody with access to a device gadget kit
 can fake descriptors and device info. Don't trust that. You are
 welcome.
 
+
+Interface authorization
+-----------------------
+There is a similar approach to allow or deny specific USB interfaces.
+That allows to block only a subset of an USB device.
+
+Authorize an interface:
+$ echo 1 > /sys/bus/usb/devices/INTERFACE/authorized
+
+Deauthorize an interface:
+$ echo 0 > /sys/bus/usb/devices/INTERFACE/authorized
+
+The default value for new interfaces
+on a particular USB bus can be changed, too.
+
+Allow interfaces per default:
+$ echo 1 > /sys/bus/usb/devices/usbX/interface_authorized_default
+
+Deny interfaces per default:
+$ echo 0 > /sys/bus/usb/devices/usbX/interface_authorized_default
+
+Per default the interface_authorized_default bit is 1.
+So all interfaces would authorized per default.
+
+Note:
+If a deauthorized interface will be authorized so the driver probing must
+be triggered manually by writing INTERFACE to /sys/bus/usb/drivers_probe
+
+For drivers that need multiple interfaces all needed interfaces should be
+authroized first. After that the drivers should be probed.
+This avoids side effects.

MAINTAINERS

@@ -1300,6 +1300,13 @@ F:	arch/arm/mach-mediatek/
 N:	mtk
 K:	mediatek
 
+ARM/Mediatek USB3 PHY DRIVER
+M:	Chunfeng Yun <chunfeng.yun@mediatek.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+L:	linux-mediatek@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	drivers/phy/phy-mt65xx-usb3.c
+
 ARM/MICREL KS8695 ARCHITECTURE
 M:	Greg Ungerer <gerg@uclinux.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)

arch/arm/mach-s3c64xx/mach-crag6410.c

@@ -809,7 +809,7 @@ static const struct gpio_led_platform_data gpio_leds_pdata = {
 	.num_leds = ARRAY_SIZE(gpio_leds),
 };
 
-static struct s3c_hsotg_plat crag6410_hsotg_pdata;
+static struct dwc2_hsotg_plat crag6410_hsotg_pdata;
 
 static void __init crag6410_machine_init(void)
 {
@@ -835,7 +835,7 @@ static void __init crag6410_machine_init(void)
 	s3c_i2c0_set_platdata(&i2c0_pdata);
 	s3c_i2c1_set_platdata(&i2c1_pdata);
 	s3c_fb_set_platdata(&crag6410_lcd_pdata);
-	s3c_hsotg_set_platdata(&crag6410_hsotg_pdata);
+	dwc2_hsotg_set_platdata(&crag6410_hsotg_pdata);
 
 	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
 	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));

arch/arm/mach-s3c64xx/mach-smartq.c

@@ -189,7 +189,7 @@ static struct s3c_hwmon_pdata smartq_hwmon_pdata __initdata = {
 	},
 };
 
-static struct s3c_hsotg_plat smartq_hsotg_pdata;
+static struct dwc2_hsotg_plat smartq_hsotg_pdata;
 
 static int __init smartq_lcd_setup_gpio(void)
 {
@@ -382,7 +382,7 @@ void __init smartq_map_io(void)
 void __init smartq_machine_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
-	s3c_hsotg_set_platdata(&smartq_hsotg_pdata);
+	dwc2_hsotg_set_platdata(&smartq_hsotg_pdata);
 	s3c_hwmon_set_platdata(&smartq_hwmon_pdata);
 	s3c_sdhci1_set_platdata(&smartq_internal_hsmmc_pdata);
 	s3c_sdhci2_set_platdata(&smartq_internal_hsmmc_pdata);

arch/arm/mach-s3c64xx/mach-smdk6410.c

@@ -628,7 +628,7 @@ static struct platform_pwm_backlight_data smdk6410_bl_data = {
 	.enable_gpio = -1,
 };
 
-static struct s3c_hsotg_plat smdk6410_hsotg_pdata;
+static struct dwc2_hsotg_plat smdk6410_hsotg_pdata;
 
 static void __init smdk6410_map_io(void)
 {
@@ -659,7 +659,7 @@ static void __init smdk6410_machine_init(void)
 	s3c_i2c0_set_platdata(NULL);
 	s3c_i2c1_set_platdata(NULL);
 	s3c_fb_set_platdata(&smdk6410_lcd_pdata);
-	s3c_hsotg_set_platdata(&smdk6410_hsotg_pdata);
+	dwc2_hsotg_set_platdata(&smdk6410_hsotg_pdata);
 
 	samsung_keypad_set_platdata(&smdk6410_keypad_data);
 

arch/arm/plat-samsung/devs.c

@@ -1042,11 +1042,11 @@ struct platform_device s3c_device_usb_hsotg = {
 	},
 };
 
-void __init s3c_hsotg_set_platdata(struct s3c_hsotg_plat *pd)
+void __init dwc2_hsotg_set_platdata(struct dwc2_hsotg_plat *pd)
 {
-	struct s3c_hsotg_plat *npd;
+	struct dwc2_hsotg_plat *npd;
 
-	npd = s3c_set_platdata(pd, sizeof(struct s3c_hsotg_plat),
+	npd = s3c_set_platdata(pd, sizeof(struct dwc2_hsotg_plat),
 			&s3c_device_usb_hsotg);
 
 	if (!npd->phy_init)

drivers/phy/Kconfig

@@ -206,6 +206,15 @@ config PHY_HIX5HD2_SATA
 	help
 	  Support for SATA PHY on Hisilicon hix5hd2 Soc.
 
+config PHY_MT65XX_USB3
+	tristate "Mediatek USB3.0 PHY Driver"
+	depends on ARCH_MEDIATEK && OF
+	select GENERIC_PHY
+	help
+	  Say 'Y' here to add support for Mediatek USB3.0 PHY driver
+	  for mt65xx SoCs. it supports two usb2.0 ports and
+	  one usb3.0 port.
+
 config PHY_SUN4I_USB
 	tristate "Allwinner sunxi SoC USB PHY driver"
 	depends on ARCH_SUNXI && HAS_IOMEM && OF
@@ -371,4 +380,13 @@ config PHY_BRCMSTB_SATA
 	  Enable this to support the SATA3 PHY on 28nm Broadcom STB SoCs.
 	  Likely useful only with CONFIG_SATA_BRCMSTB enabled.
 
+config PHY_CYGNUS_PCIE
+	tristate "Broadcom Cygnus PCIe PHY driver"
+	depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST)
+	select GENERIC_PHY
+	default ARCH_BCM_CYGNUS
+	help
+	  Enable this to support the Broadcom Cygnus PCIe PHY.
+	  If unsure, say N.
+
 endmenu

drivers/phy/Makefile

@@ -23,6 +23,7 @@ obj-$(CONFIG_TI_PIPE3)			+= phy-ti-pipe3.o
 obj-$(CONFIG_TWL4030_USB)		+= phy-twl4030-usb.o
 obj-$(CONFIG_PHY_EXYNOS5250_SATA)	+= phy-exynos5250-sata.o
 obj-$(CONFIG_PHY_HIX5HD2_SATA)		+= phy-hix5hd2-sata.o
+obj-$(CONFIG_PHY_MT65XX_USB3)		+= phy-mt65xx-usb3.o
 obj-$(CONFIG_PHY_SUN4I_USB)		+= phy-sun4i-usb.o
 obj-$(CONFIG_PHY_SUN9I_USB)		+= phy-sun9i-usb.o
 obj-$(CONFIG_PHY_SAMSUNG_USB2)		+= phy-exynos-usb2.o
@@ -46,3 +47,4 @@ obj-$(CONFIG_PHY_QCOM_UFS) 	+= phy-qcom-ufs-qmp-14nm.o
 obj-$(CONFIG_PHY_TUSB1210)		+= phy-tusb1210.o
 obj-$(CONFIG_PHY_BRCMSTB_SATA)		+= phy-brcmstb-sata.o
 obj-$(CONFIG_PHY_PISTACHIO_USB)		+= phy-pistachio-usb.o
+obj-$(CONFIG_PHY_CYGNUS_PCIE)		+= phy-bcm-cygnus-pcie.o

drivers/phy/phy-bcm-cygnus-pcie.c

+/*
+ * Copyright (C) 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+#define PCIE_CFG_OFFSET         0x00
+#define PCIE1_PHY_IDDQ_SHIFT    10
+#define PCIE0_PHY_IDDQ_SHIFT    2
+
+enum cygnus_pcie_phy_id {
+	CYGNUS_PHY_PCIE0 = 0,
+	CYGNUS_PHY_PCIE1,
+	MAX_NUM_PHYS,
+};
+
+struct cygnus_pcie_phy_core;
+
+/**
+ * struct cygnus_pcie_phy - Cygnus PCIe PHY device
+ * @core: pointer to the Cygnus PCIe PHY core control
+ * @id: internal ID to identify the Cygnus PCIe PHY
+ * @phy: pointer to the kernel PHY device
+ */
+struct cygnus_pcie_phy {
+	struct cygnus_pcie_phy_core *core;
+	enum cygnus_pcie_phy_id id;
+	struct phy *phy;
+};
+
+/**
+ * struct cygnus_pcie_phy_core - Cygnus PCIe PHY core control
+ * @dev: pointer to device
+ * @base: base register
+ * @lock: mutex to protect access to individual PHYs
+ * @phys: pointer to Cygnus PHY device
+ */
+struct cygnus_pcie_phy_core {
+	struct device *dev;
+	void __iomem *base;
+	struct mutex lock;
+	struct cygnus_pcie_phy phys[MAX_NUM_PHYS];
+};
+
+static int cygnus_pcie_power_config(struct cygnus_pcie_phy *phy, bool enable)
+{
+	struct cygnus_pcie_phy_core *core = phy->core;
+	unsigned shift;
+	u32 val;
+
+	mutex_lock(&core->lock);
+
+	switch (phy->id) {
+	case CYGNUS_PHY_PCIE0:
+		shift = PCIE0_PHY_IDDQ_SHIFT;
+		break;
+
+	case CYGNUS_PHY_PCIE1:
+		shift = PCIE1_PHY_IDDQ_SHIFT;
+		break;
+
+	default:
+		mutex_unlock(&core->lock);
+		dev_err(core->dev, "PCIe PHY %d invalid\n", phy->id);
+		return -EINVAL;
+	}
+
+	if (enable) {
+		val = readl(core->base + PCIE_CFG_OFFSET);
+		val &= ~BIT(shift);
+		writel(val, core->base + PCIE_CFG_OFFSET);
+		/*
+		 * Wait 50 ms for the PCIe Serdes to stabilize after the analog
+		 * front end is brought up
+		 */
+		msleep(50);
+	} else {
+		val = readl(core->base + PCIE_CFG_OFFSET);
+		val |= BIT(shift);
+		writel(val, core->base + PCIE_CFG_OFFSET);
+	}
+
+	mutex_unlock(&core->lock);
+	dev_dbg(core->dev, "PCIe PHY %d %s\n", phy->id,
+		enable ? "enabled" : "disabled");
+	return 0;
+}
+
+static int cygnus_pcie_phy_power_on(struct phy *p)
+{
+	struct cygnus_pcie_phy *phy = phy_get_drvdata(p);
+
+	return cygnus_pcie_power_config(phy, true);
+}
+
+static int cygnus_pcie_phy_power_off(struct phy *p)
+{
+	struct cygnus_pcie_phy *phy = phy_get_drvdata(p);
+
+	return cygnus_pcie_power_config(phy, false);
+}
+
+static struct phy_ops cygnus_pcie_phy_ops = {
+	.power_on = cygnus_pcie_phy_power_on,
+	.power_off = cygnus_pcie_phy_power_off,
+	.owner = THIS_MODULE,
+};
+
+static int cygnus_pcie_phy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *node = dev->of_node, *child;
+	struct cygnus_pcie_phy_core *core;
+	struct phy_provider *provider;
+	struct resource *res;
+	unsigned cnt = 0;
+
+	if (of_get_child_count(node) == 0) {
+		dev_err(dev, "PHY no child node\n");
+		return -ENODEV;
+	}
+
+	core = devm_kzalloc(dev, sizeof(*core), GFP_KERNEL);
+	if (!core)
+		return -ENOMEM;
+
+	core->dev = dev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	core->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(core->base))
+		return PTR_ERR(core->base);
+
+	mutex_init(&core->lock);
+
+	for_each_available_child_of_node(node, child) {
+		unsigned int id;
+		struct cygnus_pcie_phy *p;
+
+		if (of_property_read_u32(child, "reg", &id)) {
+			dev_err(dev, "missing reg property for %s\n",
+				child->name);
+			return -EINVAL;
+		}
+
+		if (id >= MAX_NUM_PHYS) {
+			dev_err(dev, "invalid PHY id: %u\n", id);
+			return -EINVAL;
+		}
+
+		if (core->phys[id].phy) {
+			dev_err(dev, "duplicated PHY id: %u\n", id);
+			return -EINVAL;
+		}
+
+		p = &core->phys[id];
+		p->phy = devm_phy_create(dev, child, &cygnus_pcie_phy_ops);
+		if (IS_ERR(p->phy)) {
+			dev_err(dev, "failed to create PHY\n");
+			return PTR_ERR(p->phy);
+		}
+
+		p->core = core;
+		p->id = id;
+		phy_set_drvdata(p->phy, p);
+		cnt++;
+	}
+
+	dev_set_drvdata(dev, core);
+
+	provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	if (IS_ERR(provider)) {
+		dev_err(dev, "failed to register PHY provider\n");
+		return PTR_ERR(provider);
+	}
+
+	dev_dbg(dev, "registered %u PCIe PHY(s)\n", cnt);
+
+	return 0;
+}
+
+static const struct of_device_id cygnus_pcie_phy_match_table[] = {
+	{ .compatible = "brcm,cygnus-pcie-phy" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, cygnus_pcie_phy_match_table);
+
+static struct platform_driver cygnus_pcie_phy_driver = {
+	.driver = {
+		.name = "cygnus-pcie-phy",
+		.of_match_table = cygnus_pcie_phy_match_table,
+	},
+	.probe = cygnus_pcie_phy_probe,
+};
+module_platform_driver(cygnus_pcie_phy_driver);
+
+MODULE_AUTHOR("Ray Jui <rjui@broadcom.com>");
+MODULE_DESCRIPTION("Broadcom Cygnus PCIe PHY driver");
+MODULE_LICENSE("GPL v2");

drivers/phy/phy-samsung-usb2.c

@@ -27,6 +27,13 @@ static int samsung_usb2_phy_power_on(struct phy *phy)
 
 	dev_dbg(drv->dev, "Request to power_on \"%s\" usb phy\n",
 		inst->cfg->label);
+
+	if (drv->vbus) {
+		ret = regulator_enable(drv->vbus);
+		if (ret)
+			goto err_regulator;
+	}
+
 	ret = clk_prepare_enable(drv->clk);
 	if (ret)
 		goto err_main_clk;
@@ -48,6 +55,9 @@ static int samsung_usb2_phy_power_on(struct phy *phy)
 err_instance_clk:
 	clk_disable_unprepare(drv->clk);
 err_main_clk:
+	if (drv->vbus)
+		regulator_disable(drv->vbus);
+err_regulator:
 	return ret;
 }
 
@@ -55,7 +65,7 @@ static int samsung_usb2_phy_power_off(struct phy *phy)
 {
 	struct samsung_usb2_phy_instance *inst = phy_get_drvdata(phy);
 	struct samsung_usb2_phy_driver *drv = inst->drv;
-	int ret;
+	int ret = 0;
 
 	dev_dbg(drv->dev, "Request to power_off \"%s\" usb phy\n",
 		inst->cfg->label);
@@ -68,7 +78,10 @@ static int samsung_usb2_phy_power_off(struct phy *phy)
 	}
 	clk_disable_unprepare(drv->ref_clk);
 	clk_disable_unprepare(drv->clk);
-	return 0;
+	if (drv->vbus)
+		ret = regulator_disable(drv->vbus);
+
+	return ret;
 }
 
 static const struct phy_ops samsung_usb2_phy_ops = {
@@ -203,6 +216,14 @@ static int samsung_usb2_phy_probe(struct platform_device *pdev)
 			return ret;
 	}
 
+	drv->vbus = devm_regulator_get(dev, "vbus");
+	if (IS_ERR(drv->vbus)) {
+		ret = PTR_ERR(drv->vbus);
+		if (ret == -EPROBE_DEFER)
+			return ret;
+		drv->vbus = NULL;
+	}
+
 	for (i = 0; i < drv->cfg->num_phys; i++) {
 		char *label = drv->cfg->phys[i].label;
 		struct samsung_usb2_phy_instance *p = &drv->instances[i];

drivers/phy/phy-samsung-usb2.h

@@ -17,6 +17,7 @@
 #include <linux/device.h>
 #include <linux/regmap.h>
 #include <linux/spinlock.h>
+#include <linux/regulator/consumer.h>
 
 #define KHZ 1000
 #define MHZ (KHZ * KHZ)
@@ -37,6 +38,7 @@ struct samsung_usb2_phy_driver {
 	const struct samsung_usb2_phy_config *cfg;
 	struct clk *clk;
 	struct clk *ref_clk;
+	struct regulator *vbus;
 	unsigned long ref_rate;
 	u32 ref_reg_val;
 	struct device *dev;

drivers/phy/phy-sun4i-usb.c

@@ -551,19 +551,15 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
 	if (IS_ERR(data->base))
 		return PTR_ERR(data->base);
 
-	data->id_det_gpio = devm_gpiod_get(dev, "usb0_id_det", GPIOD_IN);
-	if (IS_ERR(data->id_det_gpio)) {
-		if (PTR_ERR(data->id_det_gpio) == -EPROBE_DEFER)
-			return -EPROBE_DEFER;
-		data->id_det_gpio = NULL;
-	}
-
-	data->vbus_det_gpio = devm_gpiod_get(dev, "usb0_vbus_det", GPIOD_IN);
-	if (IS_ERR(data->vbus_det_gpio)) {
-		if (PTR_ERR(data->vbus_det_gpio) == -EPROBE_DEFER)
-			return -EPROBE_DEFER;
-		data->vbus_det_gpio = NULL;
-	}
+	data->id_det_gpio = devm_gpiod_get_optional(dev, "usb0_id_det",
+						    GPIOD_IN);
+	if (IS_ERR(data->id_det_gpio))
+		return PTR_ERR(data->id_det_gpio);
+
+	data->vbus_det_gpio = devm_gpiod_get_optional(dev, "usb0_vbus_det",
+						      GPIOD_IN);
+	if (IS_ERR(data->vbus_det_gpio))
+		return PTR_ERR(data->vbus_det_gpio);
 
 	if (of_find_property(np, "usb0_vbus_power-supply", NULL)) {
 		data->vbus_power_supply = devm_power_supply_get_by_phandle(dev,

drivers/usb/Makefile

@@ -27,7 +27,6 @@ obj-$(CONFIG_USB_R8A66597_HCD)	+= host/
 obj-$(CONFIG_USB_HWA_HCD)	+= host/
 obj-$(CONFIG_USB_IMX21_HCD)	+= host/
 obj-$(CONFIG_USB_FSL_MPH_DR_OF)	+= host/
-obj-$(CONFIG_USB_FUSBH200_HCD)	+= host/
 obj-$(CONFIG_USB_FOTG210_HCD)	+= host/
 obj-$(CONFIG_USB_MAX3421_HCD)	+= host/
 

drivers/usb/chipidea/Kconfig

 config USB_CHIPIDEA
 	tristate "ChipIdea Highspeed Dual Role Controller"
 	depends on ((USB_EHCI_HCD && USB_GADGET) || (USB_EHCI_HCD && !USB_GADGET) || (!USB_EHCI_HCD && USB_GADGET)) && HAS_DMA
+	select EXTCON
 	help
 	  Say Y here if your system has a dual role high speed USB
 	  controller based on ChipIdea silicon IP. Currently, only the

drivers/usb/chipidea/ci_hdrc_imx.c

@@ -56,12 +56,23 @@ static const struct ci_hdrc_imx_platform_flag imx6sx_usb_data = {
 		CI_HDRC_DISABLE_HOST_STREAMING,
 };
 
+static const struct ci_hdrc_imx_platform_flag imx6ul_usb_data = {
+	.flags = CI_HDRC_SUPPORTS_RUNTIME_PM |
+		CI_HDRC_TURN_VBUS_EARLY_ON,
+};
+
+static const struct ci_hdrc_imx_platform_flag imx7d_usb_data = {
+	.flags = CI_HDRC_SUPPORTS_RUNTIME_PM,
+};
+
 static const struct of_device_id ci_hdrc_imx_dt_ids[] = {
 	{ .compatible = "fsl,imx28-usb", .data = &imx28_usb_data},
 	{ .compatible = "fsl,imx27-usb", .data = &imx27_usb_data},
 	{ .compatible = "fsl,imx6q-usb", .data = &imx6q_usb_data},
 	{ .compatible = "fsl,imx6sl-usb", .data = &imx6sl_usb_data},
 	{ .compatible = "fsl,imx6sx-usb", .data = &imx6sx_usb_data},
+	{ .compatible = "fsl,imx6ul-usb", .data = &imx6ul_usb_data},
+	{ .compatible = "fsl,imx7d-usb", .data = &imx7d_usb_data},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, ci_hdrc_imx_dt_ids);

drivers/usb/chipidea/ci_hdrc_pci.c

@@ -142,16 +142,16 @@ static const struct pci_device_id ci_hdrc_pci_id_table[] = {
 		.driver_data = (kernel_ulong_t)&pci_platdata,
 	},
 	{
-		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0811),
+		PCI_VDEVICE(INTEL, 0x0811),
 		.driver_data = (kernel_ulong_t)&langwell_pci_platdata,
 	},
 	{
-		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0829),
+		PCI_VDEVICE(INTEL, 0x0829),
 		.driver_data = (kernel_ulong_t)&penwell_pci_platdata,
 	},
 	{
 		/* Intel Clovertrail */
-		PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xe006),
+		PCI_VDEVICE(INTEL, 0xe006),
 		.driver_data = (kernel_ulong_t)&penwell_pci_platdata,
 	},
 	{ 0 } /* end: all zeroes */

drivers/usb/chipidea/core.c

@@ -47,6 +47,7 @@
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/dma-mapping.h>
+#include <linux/extcon.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/module.h>
@@ -602,16 +603,52 @@ static irqreturn_t ci_irq(int irq, void *data)
 	return ret;
 }
 
+static int ci_vbus_notifier(struct notifier_block *nb, unsigned long event,
+			    void *ptr)
+{
+	struct ci_hdrc_cable *vbus = container_of(nb, struct ci_hdrc_cable, nb);
+	struct ci_hdrc *ci = vbus->ci;
+
+	if (event)
+		vbus->state = true;
+	else
+		vbus->state = false;
+
+	vbus->changed = true;
+
+	ci_irq(ci->irq, ci);
+	return NOTIFY_DONE;
+}
+
+static int ci_id_notifier(struct notifier_block *nb, unsigned long event,
+			  void *ptr)
+{
+	struct ci_hdrc_cable *id = container_of(nb, struct ci_hdrc_cable, nb);
+	struct ci_hdrc *ci = id->ci;
+
+	if (event)
+		id->state = false;
+	else
+		id->state = true;
+
+	id->changed = true;
+
+	ci_irq(ci->irq, ci);
+	return NOTIFY_DONE;
+}
+
 static int ci_get_platdata(struct device *dev,
 		struct ci_hdrc_platform_data *platdata)
 {
+	struct extcon_dev *ext_vbus, *ext_id;
+	struct ci_hdrc_cable *cable;
 	int ret;
 
 	if (!platdata->phy_mode)
 		platdata->phy_mode = of_usb_get_phy_mode(dev->of_node);
 
 	if (!platdata->dr_mode)
-		platdata->dr_mode = of_usb_get_dr_mode(dev->of_node);
+		platdata->dr_mode = usb_get_dr_mode(dev);
 
 	if (platdata->dr_mode == USB_DR_MODE_UNKNOWN)
 		platdata->dr_mode = USB_DR_MODE_OTG;
@@ -648,9 +685,13 @@ static int ci_get_platdata(struct device *dev,
 			return ret;
 	}
 
-	if (of_usb_get_maximum_speed(dev->of_node) == USB_SPEED_FULL)
+	if (usb_get_maximum_speed(dev) == USB_SPEED_FULL)
 		platdata->flags |= CI_HDRC_FORCE_FULLSPEED;
 
+	if (of_find_property(dev->of_node, "phy-clkgate-delay-us", NULL))
+		of_property_read_u32(dev->of_node, "phy-clkgate-delay-us",
+				     &platdata->phy_clkgate_delay_us);
+
 	platdata->itc_setting = 1;
 	if (of_find_property(dev->of_node, "itc-setting", NULL)) {
 		ret = of_property_read_u32(dev->of_node, "itc-setting",
@@ -695,9 +736,91 @@ static int ci_get_platdata(struct device *dev,
 		platdata->flags |= CI_HDRC_OVERRIDE_RX_BURST;
 	}
 
+	ext_id = ERR_PTR(-ENODEV);
+	ext_vbus = ERR_PTR(-ENODEV);
+	if (of_property_read_bool(dev->of_node, "extcon")) {
+		/* Each one of them is not mandatory */
+		ext_vbus = extcon_get_edev_by_phandle(dev, 0);
+		if (IS_ERR(ext_vbus) && PTR_ERR(ext_vbus) != -ENODEV)
+			return PTR_ERR(ext_vbus);
+
+		ext_id = extcon_get_edev_by_phandle(dev, 1);
+		if (IS_ERR(ext_id) && PTR_ERR(ext_id) != -ENODEV)
+			return PTR_ERR(ext_id);
+	}
+
+	cable = &platdata->vbus_extcon;
+	cable->nb.notifier_call = ci_vbus_notifier;
+	cable->edev = ext_vbus;
+
+	if (!IS_ERR(ext_vbus)) {
+		ret = extcon_get_cable_state_(cable->edev, EXTCON_USB);
+		if (ret)
+			cable->state = true;
+		else
+			cable->state = false;
+	}
+
+	cable = &platdata->id_extcon;
+	cable->nb.notifier_call = ci_id_notifier;
+	cable->edev = ext_id;
+
+	if (!IS_ERR(ext_id)) {
+		ret = extcon_get_cable_state_(cable->edev, EXTCON_USB_HOST);
+		if (ret)
+			cable->state = false;
+		else
+			cable->state = true;
+	}
+	return 0;
+}
+
+static int ci_extcon_register(struct ci_hdrc *ci)
+{
+	struct ci_hdrc_cable *id, *vbus;
+	int ret;
+
+	id = &ci->platdata->id_extcon;
+	id->ci = ci;
+	if (!IS_ERR(id->edev)) {
+		ret = extcon_register_notifier(id->edev, EXTCON_USB_HOST,
+					       &id->nb);
+		if (ret < 0) {
+			dev_err(ci->dev, "register ID failed\n");
+			return ret;
+		}
+	}
+
+	vbus = &ci->platdata->vbus_extcon;
+	vbus->ci = ci;
+	if (!IS_ERR(vbus->edev)) {
+		ret = extcon_register_notifier(vbus->edev, EXTCON_USB,
+					       &vbus->nb);
+		if (ret < 0) {
+			extcon_unregister_notifier(id->edev, EXTCON_USB_HOST,
+						   &id->nb);
+			dev_err(ci->dev, "register VBUS failed\n");
+			return ret;
+		}
+	}
+
 	return 0;
 }
 
+static void ci_extcon_unregister(struct ci_hdrc *ci)
+{
+	struct ci_hdrc_cable *cable;
+
+	cable = &ci->platdata->id_extcon;
+	if (!IS_ERR(cable->edev))
+		extcon_unregister_notifier(cable->edev, EXTCON_USB_HOST,
+					   &cable->nb);
+
+	cable = &ci->platdata->vbus_extcon;
+	if (!IS_ERR(cable->edev))
+		extcon_unregister_notifier(cable->edev, EXTCON_USB, &cable->nb);
+}
+
 static DEFINE_IDA(ci_ida);
 
 struct platform_device *ci_hdrc_add_device(struct device *dev,
@@ -921,6 +1044,10 @@ static int ci_hdrc_probe(struct platform_device *pdev)
 	if (ret)
 		goto stop;
 
+	ret = ci_extcon_register(ci);
+	if (ret)
+		goto stop;
+
 	if (ci->supports_runtime_pm) {
 		pm_runtime_set_active(&pdev->dev);
 		pm_runtime_enable(&pdev->dev);
@@ -938,6 +1065,7 @@ static int ci_hdrc_probe(struct platform_device *pdev)
 	if (!ret)
 		return 0;
 
+	ci_extcon_unregister(ci);
 stop:
 	ci_role_destroy(ci);
 deinit_phy:
@@ -957,6 +1085,7 @@ static int ci_hdrc_remove(struct platform_device *pdev)
 	}
 
 	dbg_remove_files(ci);
+	ci_extcon_unregister(ci);
 	ci_role_destroy(ci);
 	ci_hdrc_enter_lpm(ci, true);
 	ci_usb_phy_exit(ci);
@@ -996,6 +1125,9 @@ static void ci_controller_suspend(struct ci_hdrc *ci)
 {
 	disable_irq(ci->irq);
 	ci_hdrc_enter_lpm(ci, true);
+	if (ci->platdata->phy_clkgate_delay_us)
+		usleep_range(ci->platdata->phy_clkgate_delay_us,
+			     ci->platdata->phy_clkgate_delay_us + 50);
 	usb_phy_set_suspend(ci->usb_phy, 1);
 	ci->in_lpm = true;
 	enable_irq(ci->irq);

drivers/usb/chipidea/otg.c

@@ -30,7 +30,44 @@
  */
 u32 hw_read_otgsc(struct ci_hdrc *ci, u32 mask)
 {
-	return hw_read(ci, OP_OTGSC, mask);
+	struct ci_hdrc_cable *cable;
+	u32 val = hw_read(ci, OP_OTGSC, mask);
+
+	/*
+	 * If using extcon framework for VBUS and/or ID signal
+	 * detection overwrite OTGSC register value
+	 */
+	cable = &ci->platdata->vbus_extcon;
+	if (!IS_ERR(cable->edev)) {
+		if (cable->changed)
+			val |= OTGSC_BSVIS;
+		else
+			val &= ~OTGSC_BSVIS;
+
+		cable->changed = false;
+
+		if (cable->state)
+			val |= OTGSC_BSV;
+		else
+			val &= ~OTGSC_BSV;
+	}
+
+	cable = &ci->platdata->id_extcon;
+	if (!IS_ERR(cable->edev)) {
+		if (cable->changed)
+			val |= OTGSC_IDIS;
+		else
+			val &= ~OTGSC_IDIS;
+
+		cable->changed = false;
+
+		if (cable->state)
+			val |= OTGSC_ID;
+		else
+			val &= ~OTGSC_ID;
+	}
+
+	return val;
 }
 
 /**
@@ -77,9 +114,12 @@ static void ci_handle_id_switch(struct ci_hdrc *ci)
 			ci_role(ci)->name, ci->roles[role]->name);
 
 		ci_role_stop(ci);
+
+		if (role == CI_ROLE_GADGET)
 			/* wait vbus lower than OTGSC_BSV */
 			hw_wait_reg(ci, OP_OTGSC, OTGSC_BSV, 0,
 					CI_VBUS_STABLE_TIMEOUT_MS);
+
 		ci_role_start(ci, role);
 	}
 }

drivers/usb/chipidea/usbmisc_imx.c

@@ -72,6 +72,14 @@
 
 #define VF610_OVER_CUR_DIS		BIT(7)
 
+#define MX7D_USBNC_USB_CTRL2		0x4
+#define MX7D_USB_VBUS_WAKEUP_SOURCE_MASK	0x3
+#define MX7D_USB_VBUS_WAKEUP_SOURCE(v)		(v << 0)
+#define MX7D_USB_VBUS_WAKEUP_SOURCE_VBUS	MX7D_USB_VBUS_WAKEUP_SOURCE(0)
+#define MX7D_USB_VBUS_WAKEUP_SOURCE_AVALID	MX7D_USB_VBUS_WAKEUP_SOURCE(1)
+#define MX7D_USB_VBUS_WAKEUP_SOURCE_BVALID	MX7D_USB_VBUS_WAKEUP_SOURCE(2)
+#define MX7D_USB_VBUS_WAKEUP_SOURCE_SESS_END	MX7D_USB_VBUS_WAKEUP_SOURCE(3)
+
 struct usbmisc_ops {
 	/* It's called once when probe a usb device */
 	int (*init)(struct imx_usbmisc_data *data);
@@ -324,6 +332,55 @@ static int usbmisc_vf610_init(struct imx_usbmisc_data *data)
 	return 0;
 }
 
+static int usbmisc_imx7d_set_wakeup
+	(struct imx_usbmisc_data *data, bool enabled)
+{
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+	unsigned long flags;
+	u32 val;
+	u32 wakeup_setting = (MX6_BM_WAKEUP_ENABLE |
+		MX6_BM_VBUS_WAKEUP | MX6_BM_ID_WAKEUP);
+
+	spin_lock_irqsave(&usbmisc->lock, flags);
+	val = readl(usbmisc->base);
+	if (enabled) {
+		writel(val | wakeup_setting, usbmisc->base);
+	} else {
+		if (val & MX6_BM_WAKEUP_INTR)
+			dev_dbg(data->dev, "wakeup int\n");
+		writel(val & ~wakeup_setting, usbmisc->base);
+	}
+	spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+	return 0;
+}
+
+static int usbmisc_imx7d_init(struct imx_usbmisc_data *data)
+{
+	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
+	unsigned long flags;
+	u32 reg;
+
+	if (data->index >= 1)
+		return -EINVAL;
+
+	spin_lock_irqsave(&usbmisc->lock, flags);
+	if (data->disable_oc) {
+		reg = readl(usbmisc->base);
+		writel(reg | MX6_BM_OVER_CUR_DIS, usbmisc->base);
+	}
+
+	reg = readl(usbmisc->base + MX7D_USBNC_USB_CTRL2);
+	reg &= ~MX7D_USB_VBUS_WAKEUP_SOURCE_MASK;
+	writel(reg | MX7D_USB_VBUS_WAKEUP_SOURCE_BVALID,
+		 usbmisc->base + MX7D_USBNC_USB_CTRL2);
+	spin_unlock_irqrestore(&usbmisc->lock, flags);
+
+	usbmisc_imx7d_set_wakeup(data, false);
+
+	return 0;
+}
+
 static const struct usbmisc_ops imx25_usbmisc_ops = {
 	.init = usbmisc_imx25_init,
 	.post = usbmisc_imx25_post,
@@ -351,6 +408,11 @@ static const struct usbmisc_ops imx6sx_usbmisc_ops = {
 	.init = usbmisc_imx6sx_init,
 };
 
+static const struct usbmisc_ops imx7d_usbmisc_ops = {
+	.init = usbmisc_imx7d_init,
+	.set_wakeup = usbmisc_imx7d_set_wakeup,
+};
+
 int imx_usbmisc_init(struct imx_usbmisc_data *data)
 {
 	struct imx_usbmisc *usbmisc;
@@ -426,6 +488,10 @@ static const struct of_device_id usbmisc_imx_dt_ids[] = {
 		.compatible = "fsl,imx6sx-usbmisc",
 		.data = &imx6sx_usbmisc_ops,
 	},
+	{
+		.compatible = "fsl,imx6ul-usbmisc",
+		.data = &imx6sx_usbmisc_ops,
+	},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, usbmisc_imx_dt_ids);

drivers/usb/common/common.c

@@ -60,6 +60,24 @@ const char *usb_speed_string(enum usb_device_speed speed)
 }
 EXPORT_SYMBOL_GPL(usb_speed_string);
 
+enum usb_device_speed usb_get_maximum_speed(struct device *dev)
+{
+	const char *maximum_speed;
+	int err;
+	int i;
+
+	err = device_property_read_string(dev, "maximum-speed", &maximum_speed);
+	if (err < 0)
+		return USB_SPEED_UNKNOWN;
+
+	for (i = 0; i < ARRAY_SIZE(speed_names); i++)
+		if (strcmp(maximum_speed, speed_names[i]) == 0)
+			return i;
+
+	return USB_SPEED_UNKNOWN;
+}
+EXPORT_SYMBOL_GPL(usb_get_maximum_speed);
+
 const char *usb_state_string(enum usb_device_state state)
 {
 	static const char *const names[] = {
@@ -81,7 +99,6 @@ const char *usb_state_string(enum usb_device_state state)
 }
 EXPORT_SYMBOL_GPL(usb_state_string);
 
-#ifdef CONFIG_OF
 static const char *const usb_dr_modes[] = {
 	[USB_DR_MODE_UNKNOWN]		= "",
 	[USB_DR_MODE_HOST]		= "host",
@@ -89,19 +106,12 @@ static const char *const usb_dr_modes[] = {
 	[USB_DR_MODE_OTG]		= "otg",
 };
 
-/**
- * of_usb_get_dr_mode - Get dual role mode for given device_node
- * @np:	Pointer to the given device_node
- *
- * The function gets phy interface string from property 'dr_mode',
- * and returns the correspondig enum usb_dr_mode
- */
-enum usb_dr_mode of_usb_get_dr_mode(struct device_node *np)
+enum usb_dr_mode usb_get_dr_mode(struct device *dev)
 {
 	const char *dr_mode;
 	int err, i;
 
-	err = of_property_read_string(np, "dr_mode", &dr_mode);
+	err = device_property_read_string(dev, "dr_mode", &dr_mode);
 	if (err < 0)
 		return USB_DR_MODE_UNKNOWN;
 
@@ -111,34 +121,9 @@ enum usb_dr_mode of_usb_get_dr_mode(struct device_node *np)
 
 	return USB_DR_MODE_UNKNOWN;
 }
-EXPORT_SYMBOL_GPL(of_usb_get_dr_mode);
-
-/**
- * of_usb_get_maximum_speed - Get maximum requested speed for a given USB
- * controller.
- * @np: Pointer to the given device_node
- *
- * The function gets the maximum speed string from property "maximum-speed",
- * and returns the corresponding enum usb_device_speed.
- */
-enum usb_device_speed of_usb_get_maximum_speed(struct device_node *np)
-{
-	const char *maximum_speed;
-	int err;
-	int i;
-
-	err = of_property_read_string(np, "maximum-speed", &maximum_speed);
-	if (err < 0)
-		return USB_SPEED_UNKNOWN;
-
-	for (i = 0; i < ARRAY_SIZE(speed_names); i++)
-		if (strcmp(maximum_speed, speed_names[i]) == 0)
-			return i;
-
-	return USB_SPEED_UNKNOWN;
-}
-EXPORT_SYMBOL_GPL(of_usb_get_maximum_speed);
+EXPORT_SYMBOL_GPL(usb_get_dr_mode);
 
+#ifdef CONFIG_OF
 /**
  * of_usb_host_tpl_support - to get if Targeted Peripheral List is supported
  * for given targeted hosts (non-PC hosts)

drivers/usb/core/config.c

@@ -853,6 +853,10 @@ int usb_get_bos_descriptor(struct usb_device *dev)
 			dev->bos->ss_cap =
 				(struct usb_ss_cap_descriptor *)buffer;
 			break;
+		case USB_SSP_CAP_TYPE:
+			dev->bos->ssp_cap =
+				(struct usb_ssp_cap_descriptor *)buffer;
+			break;
 		case CONTAINER_ID_TYPE:
 			dev->bos->ss_id =
 				(struct usb_ss_container_id_descriptor *)buffer;

drivers/usb/core/driver.c

@@ -296,6 +296,10 @@ static int usb_probe_interface(struct device *dev)
 	if (udev->authorized == 0) {
 		dev_err(&intf->dev, "Device is not authorized for usage\n");
 		return error;
+	} else if (intf->authorized == 0) {
+		dev_err(&intf->dev, "Interface %d is not authorized for usage\n",
+				intf->altsetting->desc.bInterfaceNumber);
+		return error;
 	}
 
 	id = usb_match_dynamic_id(intf, driver);
@@ -417,13 +421,11 @@ static int usb_unbind_interface(struct device *dev)
 		if (ep->streams == 0)
 			continue;
 		if (j == 0) {
-			eps = kmalloc(USB_MAXENDPOINTS * sizeof(void *),
+			eps = kmalloc_array(USB_MAXENDPOINTS, sizeof(void *),
 				      GFP_KERNEL);
-			if (!eps) {
-				dev_warn(dev, "oom, leaking streams\n");
+			if (!eps)
 				break;
 		}
-		}
 		eps[j++] = ep;
 	}
 	if (j) {
@@ -508,6 +510,10 @@ int usb_driver_claim_interface(struct usb_driver *driver,
 	if (dev->driver)
 		return -EBUSY;
 
+	/* reject claim if interface is not authorized */
+	if (!iface->authorized)
+		return -ENODEV;
+
 	udev = interface_to_usbdev(iface);
 
 	dev->driver = &driver->drvwrap.driver;

drivers/usb/core/hub.c

@@ -1070,7 +1070,7 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 		 * for HUB_POST_RESET, but it's easier not to.
 		 */
 		if (type == HUB_INIT) {
-			unsigned delay = hub_power_on_good_delay(hub);
+			delay = hub_power_on_good_delay(hub);
 
 			hub_power_on(hub, false);
 			INIT_DELAYED_WORK(&hub->init_work, hub_init_func2);
@@ -1404,7 +1404,6 @@ static int hub_configure(struct usb_hub *hub,
 	/* FIXME for USB 3.0, skip for now */
 	if ((wHubCharacteristics & HUB_CHAR_COMPOUND) &&
 			!(hub_is_superspeed(hdev))) {
-		int	i;
 		char	portstr[USB_MAXCHILDREN + 1];
 
 		for (i = 0; i < maxchild; i++)
@@ -2240,39 +2239,49 @@ static int usb_enumerate_device_otg(struct usb_device *udev)
 			&& udev->parent == udev->bus->root_hub) {
 		struct usb_otg_descriptor	*desc = NULL;
 		struct usb_bus			*bus = udev->bus;
+		unsigned			port1 = udev->portnum;
 
 		/* descriptor may appear anywhere in config */
-		if (__usb_get_extra_descriptor(udev->rawdescriptors[0],
+		err = __usb_get_extra_descriptor(udev->rawdescriptors[0],
 				le16_to_cpu(udev->config[0].desc.wTotalLength),
-					USB_DT_OTG, (void **) &desc) == 0) {
-			if (desc->bmAttributes & USB_OTG_HNP) {
-				unsigned		port1 = udev->portnum;
+				USB_DT_OTG, (void **) &desc);
+		if (err || !(desc->bmAttributes & USB_OTG_HNP))
+			return 0;
 
-				dev_info(&udev->dev,
-					"Dual-Role OTG device on %sHNP port\n",
-					(port1 == bus->otg_port)
-						? "" : "non-");
+		dev_info(&udev->dev, "Dual-Role OTG device on %sHNP port\n",
+					(port1 == bus->otg_port) ? "" : "non-");
 
 		/* enable HNP before suspend, it's simpler */
-				if (port1 == bus->otg_port)
+		if (port1 == bus->otg_port) {
 			bus->b_hnp_enable = 1;
 			err = usb_control_msg(udev,
 				usb_sndctrlpipe(udev, 0),
 				USB_REQ_SET_FEATURE, 0,
-					bus->b_hnp_enable
-						? USB_DEVICE_B_HNP_ENABLE
-						: USB_DEVICE_A_ALT_HNP_SUPPORT,
-					0, NULL, 0, USB_CTRL_SET_TIMEOUT);
+				USB_DEVICE_B_HNP_ENABLE,
+				0, NULL, 0,
+				USB_CTRL_SET_TIMEOUT);
 			if (err < 0) {
-					/* OTG MESSAGE: report errors here,
+				/*
+				 * OTG MESSAGE: report errors here,
 				 * customize to match your product.
 				 */
-					dev_info(&udev->dev,
-						"can't set HNP mode: %d\n",
+				dev_err(&udev->dev, "can't set HNP mode: %d\n",
 									err);
 				bus->b_hnp_enable = 0;
 			}
-			}
+		} else if (desc->bLength == sizeof
+				(struct usb_otg_descriptor)) {
+			/* Set a_alt_hnp_support for legacy otg device */
+			err = usb_control_msg(udev,
+				usb_sndctrlpipe(udev, 0),
+				USB_REQ_SET_FEATURE, 0,
+				USB_DEVICE_A_ALT_HNP_SUPPORT,
+				0, NULL, 0,
+				USB_CTRL_SET_TIMEOUT);
+			if (err < 0)
+				dev_err(&udev->dev,
+					"set a_alt_hnp_support failed: %d\n",
+					err);
 		}
 	}
 #endif
@@ -4222,7 +4231,7 @@ static int hub_enable_device(struct usb_device *udev)
  * but it is still necessary to lock the port.
  */
 static int
-hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
+hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1,
 		int retry_counter)
 {
 	struct usb_device	*hdev = hub->hdev;
@@ -4526,7 +4535,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 }
 
 static void
-check_highspeed (struct usb_hub *hub, struct usb_device *udev, int port1)
+check_highspeed(struct usb_hub *hub, struct usb_device *udev, int port1)
 {
 	struct usb_qualifier_descriptor	*qual;
 	int				status;
@@ -4534,11 +4543,11 @@ check_highspeed (struct usb_hub *hub, struct usb_device *udev, int port1)
 	if (udev->quirks & USB_QUIRK_DEVICE_QUALIFIER)
 		return;
 
-	qual = kmalloc (sizeof *qual, GFP_KERNEL);
+	qual = kmalloc(sizeof *qual, GFP_KERNEL);
 	if (qual == NULL)
 		return;
 
-	status = usb_get_descriptor (udev, USB_DT_DEVICE_QUALIFIER, 0,
+	status = usb_get_descriptor(udev, USB_DT_DEVICE_QUALIFIER, 0,
 			qual, sizeof *qual);
 	if (status == sizeof *qual) {
 		dev_info(&udev->dev, "not running at top speed; "
@@ -4554,7 +4563,7 @@ check_highspeed (struct usb_hub *hub, struct usb_device *udev, int port1)
 }
 
 static unsigned
-hub_power_remaining (struct usb_hub *hub)
+hub_power_remaining(struct usb_hub *hub)
 {
 	struct usb_device *hdev = hub->hdev;
 	int remaining;
@@ -4741,7 +4750,7 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
 		if (le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0200
 				&& udev->speed == USB_SPEED_FULL
 				&& highspeed_hubs != 0)
-			check_highspeed (hub, udev, port1);
+			check_highspeed(hub, udev, port1);
 
 		/* Store the parent's children[] pointer.  At this point
 		 * udev becomes globally accessible, although presumably
@@ -5115,7 +5124,7 @@ static const struct usb_device_id hub_id_table[] = {
     { }						/* Terminating entry */
 };
 
-MODULE_DEVICE_TABLE (usb, hub_id_table);
+MODULE_DEVICE_TABLE(usb, hub_id_table);
 
 static struct usb_driver hub_driver = {
 	.name =		"hub",
@@ -5227,7 +5236,7 @@ static int descriptors_changed(struct usb_device *udev,
 			changed = 1;
 			break;
 		}
-		if (memcmp (buf, udev->rawdescriptors[index], old_length)
+		if (memcmp(buf, udev->rawdescriptors[index], old_length)
 				!= 0) {
 			dev_dbg(&udev->dev, "config index %d changed (#%d)\n",
 				index,

drivers/usb/core/message.c

@@ -1387,8 +1387,6 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate)
 	 * new altsetting.
 	 */
 	if (manual) {
-		int i;
-
 		for (i = 0; i < alt->desc.bNumEndpoints; i++) {
 			epaddr = alt->endpoint[i].desc.bEndpointAddress;
 			pipe = __create_pipe(dev,
@@ -1555,6 +1553,44 @@ static void usb_release_interface(struct device *dev)
 	kfree(intf);
 }
 
+/*
+ * usb_deauthorize_interface - deauthorize an USB interface
+ *
+ * @intf: USB interface structure
+ */
+void usb_deauthorize_interface(struct usb_interface *intf)
+{
+	struct device *dev = &intf->dev;
+
+	device_lock(dev->parent);
+
+	if (intf->authorized) {
+		device_lock(dev);
+		intf->authorized = 0;
+		device_unlock(dev);
+
+		usb_forced_unbind_intf(intf);
+	}
+
+	device_unlock(dev->parent);
+}
+
+/*
+ * usb_authorize_interface - authorize an USB interface
+ *
+ * @intf: USB interface structure
+ */
+void usb_authorize_interface(struct usb_interface *intf)
+{
+	struct device *dev = &intf->dev;
+
+	if (!intf->authorized) {
+		device_lock(dev);
+		intf->authorized = 1; /* authorize interface */
+		device_unlock(dev);
+	}
+}
+
 static int usb_if_uevent(struct device *dev, struct kobj_uevent_env *env)
 {
 	struct usb_device *usb_dev;
@@ -1807,6 +1843,7 @@ int usb_set_configuration(struct usb_device *dev, int configuration)
 		intfc = cp->intf_cache[i];
 		intf->altsetting = intfc->altsetting;
 		intf->num_altsetting = intfc->num_altsetting;
+		intf->authorized = !!HCD_INTF_AUTHORIZED(hcd);
 		kref_get(&intfc->ref);
 
 		alt = usb_altnum_to_altsetting(intf, 0);

drivers/usb/core/sysfs.c

@@ -957,6 +957,41 @@ static ssize_t supports_autosuspend_show(struct device *dev,
 }
 static DEVICE_ATTR_RO(supports_autosuspend);
 
+/*
+ * interface_authorized_show - show authorization status of an USB interface
+ * 1 is authorized, 0 is deauthorized
+ */
+static ssize_t interface_authorized_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct usb_interface *intf = to_usb_interface(dev);
+
+	return sprintf(buf, "%u\n", intf->authorized);
+}
+
+/*
+ * interface_authorized_store - authorize or deauthorize an USB interface
+ */
+static ssize_t interface_authorized_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct usb_interface *intf = to_usb_interface(dev);
+	bool val;
+
+	if (strtobool(buf, &val) != 0)
+		return -EINVAL;
+
+	if (val)
+		usb_authorize_interface(intf);
+	else
+		usb_deauthorize_interface(intf);
+
+	return count;
+}
+static struct device_attribute dev_attr_interface_authorized =
+		__ATTR(authorized, S_IRUGO | S_IWUSR,
+		interface_authorized_show, interface_authorized_store);
+
 static struct attribute *intf_attrs[] = {
 	&dev_attr_bInterfaceNumber.attr,
 	&dev_attr_bAlternateSetting.attr,
@@ -966,6 +1001,7 @@ static struct attribute *intf_attrs[] = {
 	&dev_attr_bInterfaceProtocol.attr,
 	&dev_attr_modalias.attr,
 	&dev_attr_supports_autosuspend.attr,
+	&dev_attr_interface_authorized.attr,
 	NULL,
 };
 static struct attribute_group intf_attr_grp = {

drivers/usb/core/urb.c

@@ -129,9 +129,8 @@ void usb_anchor_urb(struct urb *urb, struct usb_anchor *anchor)
 	list_add_tail(&urb->anchor_list, &anchor->urb_list);
 	urb->anchor = anchor;
 
-	if (unlikely(anchor->poisoned)) {
+	if (unlikely(anchor->poisoned))
 		atomic_inc(&urb->reject);
-	}
 
 	spin_unlock_irqrestore(&anchor->lock, flags);
 }

drivers/usb/core/usb.c

@@ -510,7 +510,7 @@ struct usb_device *usb_alloc_dev(struct usb_device *parent,
 	if (root_hub)	/* Root hub always ok [and always wired] */
 		dev->authorized = 1;
 	else {
-		dev->authorized = usb_hcd->authorized_default;
+		dev->authorized = !!HCD_DEV_AUTHORIZED(usb_hcd);
 		dev->wusb = usb_bus_is_wusb(bus) ? 1 : 0;
 	}
 	return dev;

drivers/usb/core/usb.h

@@ -27,6 +27,8 @@ extern void usb_release_interface_cache(struct kref *ref);
 extern void usb_disable_device(struct usb_device *dev, int skip_ep0);
 extern int usb_deauthorize_device(struct usb_device *);
 extern int usb_authorize_device(struct usb_device *);
+extern void usb_deauthorize_interface(struct usb_interface *);
+extern void usb_authorize_interface(struct usb_interface *);
 extern void usb_detect_quirks(struct usb_device *udev);
 extern void usb_detect_interface_quirks(struct usb_device *udev);
 extern int usb_remove_device(struct usb_device *udev);

drivers/usb/dwc2/core.h

@@ -44,22 +44,38 @@
 #include <linux/usb/phy.h>
 #include "hw.h"
 
-#ifdef DWC2_LOG_WRITES
-static inline void do_write(u32 value, void *addr)
+static inline u32 dwc2_readl(const void __iomem *addr)
 {
-	writel(value, addr);
-	pr_info("INFO:: wrote %08x to %p\n", value, addr);
+	u32 value = __raw_readl(addr);
+
+	/* In order to preserve endianness __raw_* operation is used. Therefore
+	 * a barrier is needed to ensure IO access is not re-ordered across
+	 * reads or writes
+	 */
+	mb();
+	return value;
 }
 
-#undef writel
-#define writel(v, a)	do_write(v, a)
+static inline void dwc2_writel(u32 value, void __iomem *addr)
+{
+	__raw_writel(value, addr);
+
+	/*
+	 * In order to preserve endianness __raw_* operation is used. Therefore
+	 * a barrier is needed to ensure IO access is not re-ordered across
+	 * reads or writes
+	 */
+	mb();
+#ifdef DWC2_LOG_WRITES
+	pr_info("INFO:: wrote %08x to %p\n", value, addr);
 #endif
+}
 
 /* Maximum number of Endpoints/HostChannels */
 #define MAX_EPS_CHANNELS	16
 
-/* s3c-hsotg declarations */
-static const char * const s3c_hsotg_supply_names[] = {
+/* dwc2-hsotg declarations */
+static const char * const dwc2_hsotg_supply_names[] = {
 	"vusb_d",               /* digital USB supply, 1.2V */
 	"vusb_a",               /* analog USB supply, 1.1V */
 };
@@ -85,10 +101,10 @@ static const char * const s3c_hsotg_supply_names[] = {
 #define EP0_MPS_LIMIT   64
 
 struct dwc2_hsotg;
-struct s3c_hsotg_req;
+struct dwc2_hsotg_req;
 
 /**
- * struct s3c_hsotg_ep - driver endpoint definition.
+ * struct dwc2_hsotg_ep - driver endpoint definition.
  * @ep: The gadget layer representation of the endpoint.
  * @name: The driver generated name for the endpoint.
  * @queue: Queue of requests for this endpoint.
@@ -127,11 +143,11 @@ struct s3c_hsotg_req;
  * as in shared-fifo mode periodic in acts like a single-frame packet
  * buffer than a fifo)
  */
-struct s3c_hsotg_ep {
+struct dwc2_hsotg_ep {
 	struct usb_ep           ep;
 	struct list_head        queue;
 	struct dwc2_hsotg       *parent;
-	struct s3c_hsotg_req    *req;
+	struct dwc2_hsotg_req    *req;
 	struct dentry           *debugfs;
 
 	unsigned long           total_data;
@@ -150,17 +166,18 @@ struct s3c_hsotg_ep {
 	unsigned int            periodic:1;
 	unsigned int            isochronous:1;
 	unsigned int            send_zlp:1;
+	unsigned int            has_correct_parity:1;
 
 	char                    name[10];
 };
 
 /**
- * struct s3c_hsotg_req - data transfer request
+ * struct dwc2_hsotg_req - data transfer request
  * @req: The USB gadget request
  * @queue: The list of requests for the endpoint this is queued for.
  * @saved_req_buf: variable to save req.buf when bounce buffers are used.
  */
-struct s3c_hsotg_req {
+struct dwc2_hsotg_req {
 	struct usb_request      req;
 	struct list_head        queue;
 	void *saved_req_buf;
@@ -562,6 +579,15 @@ struct dwc2_hregs_backup {
  *                      - USB_DR_MODE_PERIPHERAL
  *                      - USB_DR_MODE_HOST
  *                      - USB_DR_MODE_OTG
+ * @hcd_enabled		Host mode sub-driver initialization indicator.
+ * @gadget_enabled	Peripheral mode sub-driver initialization indicator.
+ * @ll_hw_enabled	Status of low-level hardware resources.
+ * @phy:                The otg phy transceiver structure for phy control.
+ * @uphy:               The otg phy transceiver structure for old USB phy control.
+ * @plat:               The platform specific configuration data. This can be removed once
+ *                      all SoCs support usb transceiver.
+ * @supplies:           Definition of USB power supplies
+ * @phyif:              PHY interface width
  * @lock:		Spinlock that protects all the driver data structures
  * @priv:		Stores a pointer to the struct usb_hcd
  * @queuing_high_bandwidth: True if multiple packets of a high-bandwidth
@@ -654,12 +680,6 @@ struct dwc2_hregs_backup {
  * These are for peripheral mode:
  *
  * @driver:             USB gadget driver
- * @phy:                The otg phy transceiver structure for phy control.
- * @uphy:               The otg phy transceiver structure for old USB phy control.
- * @plat:               The platform specific configuration data. This can be removed once
- *                      all SoCs support usb transceiver.
- * @supplies:           Definition of USB power supplies
- * @phyif:              PHY interface width
  * @dedicated_fifos:    Set if the hardware has dedicated IN-EP fifos.
  * @num_of_eps:         Number of available EPs (excluding EP0)
  * @debug_root:         Root directrory for debugfs.
@@ -672,7 +692,6 @@ struct dwc2_hregs_backup {
  * @ctrl_req:           Request for EP0 control packets.
  * @ep0_state:          EP0 control transfers state
  * @test_mode:          USB test mode requested by the host
- * @last_rst:           Time of last reset
  * @eps:                The endpoints being supplied to the gadget framework
  * @g_using_dma:          Indicate if dma usage is enabled
  * @g_rx_fifo_sz:         Contains rx fifo size value
@@ -690,13 +709,15 @@ struct dwc2_hsotg {
 	enum usb_dr_mode dr_mode;
 	unsigned int hcd_enabled:1;
 	unsigned int gadget_enabled:1;
+	unsigned int ll_hw_enabled:1;
 
 	struct phy *phy;
 	struct usb_phy *uphy;
-	struct regulator_bulk_data supplies[ARRAY_SIZE(s3c_hsotg_supply_names)];
+	struct dwc2_hsotg_plat *plat;
+	struct regulator_bulk_data supplies[ARRAY_SIZE(dwc2_hsotg_supply_names)];
+	u32 phyif;
 
 	spinlock_t lock;
-	struct mutex init_mutex;
 	void *priv;
 	int     irq;
 	struct clk *clk;
@@ -748,6 +769,7 @@ struct dwc2_hsotg {
 	u16 frame_usecs[8];
 	u16 frame_number;
 	u16 periodic_qh_count;
+	bool bus_suspended;
 
 #ifdef CONFIG_USB_DWC2_TRACK_MISSED_SOFS
 #define FRAME_NUM_ARRAY_SIZE 1000
@@ -796,9 +818,6 @@ struct dwc2_hsotg {
 #if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
 	/* Gadget structures */
 	struct usb_gadget_driver *driver;
-	struct s3c_hsotg_plat *plat;
-
-	u32 phyif;
 	int fifo_mem;
 	unsigned int dedicated_fifos:1;
 	unsigned char num_of_eps;
@@ -814,9 +833,8 @@ struct dwc2_hsotg {
 	struct usb_gadget gadget;
 	unsigned int enabled:1;
 	unsigned int connected:1;
-	unsigned long last_rst;
-	struct s3c_hsotg_ep *eps_in[MAX_EPS_CHANNELS];
-	struct s3c_hsotg_ep *eps_out[MAX_EPS_CHANNELS];
+	struct dwc2_hsotg_ep *eps_in[MAX_EPS_CHANNELS];
+	struct dwc2_hsotg_ep *eps_out[MAX_EPS_CHANNELS];
 	u32 g_using_dma;
 	u32 g_rx_fifo_sz;
 	u32 g_np_g_tx_fifo_sz;
@@ -1088,7 +1106,8 @@ extern void dwc2_set_all_params(struct dwc2_core_params *params, int value);
 
 extern int dwc2_get_hwparams(struct dwc2_hsotg *hsotg);
 
-
+extern int dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg);
+extern int dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg);
 
 /*
  * Dump core registers and SPRAM
@@ -1104,30 +1123,30 @@ extern u16 dwc2_get_otg_version(struct dwc2_hsotg *hsotg);
 
 /* Gadget defines */
 #if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
-extern int s3c_hsotg_remove(struct dwc2_hsotg *hsotg);
-extern int s3c_hsotg_suspend(struct dwc2_hsotg *dwc2);
-extern int s3c_hsotg_resume(struct dwc2_hsotg *dwc2);
+extern int dwc2_hsotg_remove(struct dwc2_hsotg *hsotg);
+extern int dwc2_hsotg_suspend(struct dwc2_hsotg *dwc2);
+extern int dwc2_hsotg_resume(struct dwc2_hsotg *dwc2);
 extern int dwc2_gadget_init(struct dwc2_hsotg *hsotg, int irq);
-extern void s3c_hsotg_core_init_disconnected(struct dwc2_hsotg *dwc2,
+extern void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *dwc2,
 		bool reset);
-extern void s3c_hsotg_core_connect(struct dwc2_hsotg *hsotg);
-extern void s3c_hsotg_disconnect(struct dwc2_hsotg *dwc2);
-extern int s3c_hsotg_set_test_mode(struct dwc2_hsotg *hsotg, int testmode);
+extern void dwc2_hsotg_core_connect(struct dwc2_hsotg *hsotg);
+extern void dwc2_hsotg_disconnect(struct dwc2_hsotg *dwc2);
+extern int dwc2_hsotg_set_test_mode(struct dwc2_hsotg *hsotg, int testmode);
 #define dwc2_is_device_connected(hsotg) (hsotg->connected)
 #else
-static inline int s3c_hsotg_remove(struct dwc2_hsotg *dwc2)
+static inline int dwc2_hsotg_remove(struct dwc2_hsotg *dwc2)
 { return 0; }
-static inline int s3c_hsotg_suspend(struct dwc2_hsotg *dwc2)
+static inline int dwc2_hsotg_suspend(struct dwc2_hsotg *dwc2)
 { return 0; }
-static inline int s3c_hsotg_resume(struct dwc2_hsotg *dwc2)
+static inline int dwc2_hsotg_resume(struct dwc2_hsotg *dwc2)
 { return 0; }
 static inline int dwc2_gadget_init(struct dwc2_hsotg *hsotg, int irq)
 { return 0; }
-static inline void s3c_hsotg_core_init_disconnected(struct dwc2_hsotg *dwc2,
+static inline void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *dwc2,
 		bool reset) {}
-static inline void s3c_hsotg_core_connect(struct dwc2_hsotg *hsotg) {}
-static inline void s3c_hsotg_disconnect(struct dwc2_hsotg *dwc2) {}
-static inline int s3c_hsotg_set_test_mode(struct dwc2_hsotg *hsotg,
+static inline void dwc2_hsotg_core_connect(struct dwc2_hsotg *hsotg) {}
+static inline void dwc2_hsotg_disconnect(struct dwc2_hsotg *dwc2) {}
+static inline int dwc2_hsotg_set_test_mode(struct dwc2_hsotg *hsotg,
 							int testmode)
 { return 0; }
 #define dwc2_is_device_connected(hsotg) (0)

drivers/usb/dwc2/core_intr.c

@@ -80,15 +80,15 @@ static const char *dwc2_op_state_str(struct dwc2_hsotg *hsotg)
  */
 static void dwc2_handle_usb_port_intr(struct dwc2_hsotg *hsotg)
 {
-	u32 hprt0 = readl(hsotg->regs + HPRT0);
+	u32 hprt0 = dwc2_readl(hsotg->regs + HPRT0);
 
 	if (hprt0 & HPRT0_ENACHG) {
 		hprt0 &= ~HPRT0_ENA;
-		writel(hprt0, hsotg->regs + HPRT0);
+		dwc2_writel(hprt0, hsotg->regs + HPRT0);
 	}
 
 	/* Clear interrupt */
-	writel(GINTSTS_PRTINT, hsotg->regs + GINTSTS);
+	dwc2_writel(GINTSTS_PRTINT, hsotg->regs + GINTSTS);
 }
 
 /**
@@ -102,7 +102,7 @@ static void dwc2_handle_mode_mismatch_intr(struct dwc2_hsotg *hsotg)
 		 dwc2_is_host_mode(hsotg) ? "Host" : "Device");
 
 	/* Clear interrupt */
-	writel(GINTSTS_MODEMIS, hsotg->regs + GINTSTS);
+	dwc2_writel(GINTSTS_MODEMIS, hsotg->regs + GINTSTS);
 }
 
 /**
@@ -117,8 +117,8 @@ static void dwc2_handle_otg_intr(struct dwc2_hsotg *hsotg)
 	u32 gotgctl;
 	u32 gintmsk;
 
-	gotgint = readl(hsotg->regs + GOTGINT);
-	gotgctl = readl(hsotg->regs + GOTGCTL);
+	gotgint = dwc2_readl(hsotg->regs + GOTGINT);
+	gotgctl = dwc2_readl(hsotg->regs + GOTGCTL);
 	dev_dbg(hsotg->dev, "++OTG Interrupt gotgint=%0x [%s]\n", gotgint,
 		dwc2_op_state_str(hsotg));
 
@@ -126,10 +126,10 @@ static void dwc2_handle_otg_intr(struct dwc2_hsotg *hsotg)
 		dev_dbg(hsotg->dev,
 			" ++OTG Interrupt: Session End Detected++ (%s)\n",
 			dwc2_op_state_str(hsotg));
-		gotgctl = readl(hsotg->regs + GOTGCTL);
+		gotgctl = dwc2_readl(hsotg->regs + GOTGCTL);
 
 		if (dwc2_is_device_mode(hsotg))
-			s3c_hsotg_disconnect(hsotg);
+			dwc2_hsotg_disconnect(hsotg);
 
 		if (hsotg->op_state == OTG_STATE_B_HOST) {
 			hsotg->op_state = OTG_STATE_B_PERIPHERAL;
@@ -152,15 +152,15 @@ static void dwc2_handle_otg_intr(struct dwc2_hsotg *hsotg)
 			hsotg->lx_state = DWC2_L0;
 		}
 
-		gotgctl = readl(hsotg->regs + GOTGCTL);
+		gotgctl = dwc2_readl(hsotg->regs + GOTGCTL);
 		gotgctl &= ~GOTGCTL_DEVHNPEN;
-		writel(gotgctl, hsotg->regs + GOTGCTL);
+		dwc2_writel(gotgctl, hsotg->regs + GOTGCTL);
 	}
 
 	if (gotgint & GOTGINT_SES_REQ_SUC_STS_CHNG) {
 		dev_dbg(hsotg->dev,
 			" ++OTG Interrupt: Session Request Success Status Change++\n");
-		gotgctl = readl(hsotg->regs + GOTGCTL);
+		gotgctl = dwc2_readl(hsotg->regs + GOTGCTL);
 		if (gotgctl & GOTGCTL_SESREQSCS) {
 			if (hsotg->core_params->phy_type ==
 					DWC2_PHY_TYPE_PARAM_FS
@@ -168,9 +168,9 @@ static void dwc2_handle_otg_intr(struct dwc2_hsotg *hsotg)
 				hsotg->srp_success = 1;
 			} else {
 				/* Clear Session Request */
-				gotgctl = readl(hsotg->regs + GOTGCTL);
+				gotgctl = dwc2_readl(hsotg->regs + GOTGCTL);
 				gotgctl &= ~GOTGCTL_SESREQ;
-				writel(gotgctl, hsotg->regs + GOTGCTL);
+				dwc2_writel(gotgctl, hsotg->regs + GOTGCTL);
 			}
 		}
 	}
@@ -180,7 +180,7 @@ static void dwc2_handle_otg_intr(struct dwc2_hsotg *hsotg)
 		 * Print statements during the HNP interrupt handling
 		 * can cause it to fail
 		 */
-		gotgctl = readl(hsotg->regs + GOTGCTL);
+		gotgctl = dwc2_readl(hsotg->regs + GOTGCTL);
 		/*
 		 * WA for 3.00a- HW is not setting cur_mode, even sometimes
 		 * this does not help
@@ -200,9 +200,9 @@ static void dwc2_handle_otg_intr(struct dwc2_hsotg *hsotg)
 				 * interrupt does not get handled and Linux
 				 * complains loudly.
 				 */
-				gintmsk = readl(hsotg->regs + GINTMSK);
+				gintmsk = dwc2_readl(hsotg->regs + GINTMSK);
 				gintmsk &= ~GINTSTS_SOF;
-				writel(gintmsk, hsotg->regs + GINTMSK);
+				dwc2_writel(gintmsk, hsotg->regs + GINTMSK);
 
 				/*
 				 * Call callback function with spin lock
@@ -216,9 +216,9 @@ static void dwc2_handle_otg_intr(struct dwc2_hsotg *hsotg)
 				hsotg->op_state = OTG_STATE_B_HOST;
 			}
 		} else {
-			gotgctl = readl(hsotg->regs + GOTGCTL);
+			gotgctl = dwc2_readl(hsotg->regs + GOTGCTL);
 			gotgctl &= ~(GOTGCTL_HNPREQ | GOTGCTL_DEVHNPEN);
-			writel(gotgctl, hsotg->regs + GOTGCTL);
+			dwc2_writel(gotgctl, hsotg->regs + GOTGCTL);
 			dev_dbg(hsotg->dev, "HNP Failed\n");
 			dev_err(hsotg->dev,
 				"Device Not Connected/Responding\n");
@@ -244,9 +244,9 @@ static void dwc2_handle_otg_intr(struct dwc2_hsotg *hsotg)
 			hsotg->op_state = OTG_STATE_A_PERIPHERAL;
 		} else {
 			/* Need to disable SOF interrupt immediately */
-			gintmsk = readl(hsotg->regs + GINTMSK);
+			gintmsk = dwc2_readl(hsotg->regs + GINTMSK);
 			gintmsk &= ~GINTSTS_SOF;
-			writel(gintmsk, hsotg->regs + GINTMSK);
+			dwc2_writel(gintmsk, hsotg->regs + GINTMSK);
 			spin_unlock(&hsotg->lock);
 			dwc2_hcd_start(hsotg);
 			spin_lock(&hsotg->lock);
@@ -261,7 +261,7 @@ static void dwc2_handle_otg_intr(struct dwc2_hsotg *hsotg)
 		dev_dbg(hsotg->dev, " ++OTG Interrupt: Debounce Done++\n");
 
 	/* Clear GOTGINT */
-	writel(gotgint, hsotg->regs + GOTGINT);
+	dwc2_writel(gotgint, hsotg->regs + GOTGINT);
 }
 
 /**
@@ -276,11 +276,11 @@ static void dwc2_handle_otg_intr(struct dwc2_hsotg *hsotg)
  */
 static void dwc2_handle_conn_id_status_change_intr(struct dwc2_hsotg *hsotg)
 {
-	u32 gintmsk = readl(hsotg->regs + GINTMSK);
+	u32 gintmsk = dwc2_readl(hsotg->regs + GINTMSK);
 
 	/* Need to disable SOF interrupt immediately */
 	gintmsk &= ~GINTSTS_SOF;
-	writel(gintmsk, hsotg->regs + GINTMSK);
+	dwc2_writel(gintmsk, hsotg->regs + GINTMSK);
 
 	dev_dbg(hsotg->dev, " ++Connector ID Status Change Interrupt++  (%s)\n",
 		dwc2_is_host_mode(hsotg) ? "Host" : "Device");
@@ -297,7 +297,7 @@ static void dwc2_handle_conn_id_status_change_intr(struct dwc2_hsotg *hsotg)
 	}
 
 	/* Clear interrupt */
-	writel(GINTSTS_CONIDSTSCHNG, hsotg->regs + GINTSTS);
+	dwc2_writel(GINTSTS_CONIDSTSCHNG, hsotg->regs + GINTSTS);
 }
 
 /**
@@ -313,16 +313,28 @@ static void dwc2_handle_conn_id_status_change_intr(struct dwc2_hsotg *hsotg)
  */
 static void dwc2_handle_session_req_intr(struct dwc2_hsotg *hsotg)
 {
-	dev_dbg(hsotg->dev, "++Session Request Interrupt++\n");
+	int ret;
+
+	dev_dbg(hsotg->dev, "Session request interrupt - lx_state=%d\n",
+							hsotg->lx_state);
 
 	/* Clear interrupt */
-	writel(GINTSTS_SESSREQINT, hsotg->regs + GINTSTS);
+	dwc2_writel(GINTSTS_SESSREQINT, hsotg->regs + GINTSTS);
+
+	if (dwc2_is_device_mode(hsotg)) {
+		if (hsotg->lx_state == DWC2_L2) {
+			ret = dwc2_exit_hibernation(hsotg, true);
+			if (ret && (ret != -ENOTSUPP))
+				dev_err(hsotg->dev,
+					"exit hibernation failed\n");
+		}
 
 		/*
-	 * Report disconnect if there is any previous session established
+		 * Report disconnect if there is any previous session
+		 * established
 		 */
-	if (dwc2_is_device_mode(hsotg))
-		s3c_hsotg_disconnect(hsotg);
+		dwc2_hsotg_disconnect(hsotg);
+	}
 }
 
 /*
@@ -339,13 +351,14 @@ static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg)
 	dev_dbg(hsotg->dev, "%s lxstate = %d\n", __func__, hsotg->lx_state);
 
 	if (dwc2_is_device_mode(hsotg)) {
-		dev_dbg(hsotg->dev, "DSTS=0x%0x\n", readl(hsotg->regs + DSTS));
+		dev_dbg(hsotg->dev, "DSTS=0x%0x\n",
+			dwc2_readl(hsotg->regs + DSTS));
 		if (hsotg->lx_state == DWC2_L2) {
-			u32 dctl = readl(hsotg->regs + DCTL);
+			u32 dctl = dwc2_readl(hsotg->regs + DCTL);
 
 			/* Clear Remote Wakeup Signaling */
 			dctl &= ~DCTL_RMTWKUPSIG;
-			writel(dctl, hsotg->regs + DCTL);
+			dwc2_writel(dctl, hsotg->regs + DCTL);
 			ret = dwc2_exit_hibernation(hsotg, true);
 			if (ret && (ret != -ENOTSUPP))
 				dev_err(hsotg->dev, "exit hibernation failed\n");
@@ -355,12 +368,16 @@ static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg)
 		/* Change to L0 state */
 		hsotg->lx_state = DWC2_L0;
 	} else {
+		if (hsotg->core_params->hibernation) {
+			dwc2_writel(GINTSTS_WKUPINT, hsotg->regs + GINTSTS);
+			return;
+		}
 		if (hsotg->lx_state != DWC2_L1) {
-			u32 pcgcctl = readl(hsotg->regs + PCGCTL);
+			u32 pcgcctl = dwc2_readl(hsotg->regs + PCGCTL);
 
 			/* Restart the Phy Clock */
 			pcgcctl &= ~PCGCTL_STOPPCLK;
-			writel(pcgcctl, hsotg->regs + PCGCTL);
+			dwc2_writel(pcgcctl, hsotg->regs + PCGCTL);
 			mod_timer(&hsotg->wkp_timer,
 				  jiffies + msecs_to_jiffies(71));
 		} else {
@@ -370,7 +387,7 @@ static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg)
 	}
 
 	/* Clear interrupt */
-	writel(GINTSTS_WKUPINT, hsotg->regs + GINTSTS);
+	dwc2_writel(GINTSTS_WKUPINT, hsotg->regs + GINTSTS);
 }
 
 /*
@@ -386,10 +403,7 @@ static void dwc2_handle_disconnect_intr(struct dwc2_hsotg *hsotg)
 	if (hsotg->op_state == OTG_STATE_A_HOST)
 		dwc2_hcd_disconnect(hsotg);
 
-	/* Change to L3 (OFF) state */
-	hsotg->lx_state = DWC2_L3;
-
-	writel(GINTSTS_DISCONNINT, hsotg->regs + GINTSTS);
+	dwc2_writel(GINTSTS_DISCONNINT, hsotg->regs + GINTSTS);
 }
 
 /*
@@ -412,7 +426,7 @@ static void dwc2_handle_usb_suspend_intr(struct dwc2_hsotg *hsotg)
 		 * Check the Device status register to determine if the Suspend
 		 * state is active
 		 */
-		dsts = readl(hsotg->regs + DSTS);
+		dsts = dwc2_readl(hsotg->regs + DSTS);
 		dev_dbg(hsotg->dev, "DSTS=0x%0x\n", dsts);
 		dev_dbg(hsotg->dev,
 			"DSTS.Suspend Status=%d HWCFG4.Power Optimize=%d\n",
@@ -465,7 +479,7 @@ static void dwc2_handle_usb_suspend_intr(struct dwc2_hsotg *hsotg)
 
 clear_int:
 	/* Clear interrupt */
-	writel(GINTSTS_USBSUSP, hsotg->regs + GINTSTS);
+	dwc2_writel(GINTSTS_USBSUSP, hsotg->regs + GINTSTS);
 }
 
 #define GINTMSK_COMMON	(GINTSTS_WKUPINT | GINTSTS_SESSREQINT |		\
@@ -483,9 +497,9 @@ static u32 dwc2_read_common_intr(struct dwc2_hsotg *hsotg)
 	u32 gahbcfg;
 	u32 gintmsk_common = GINTMSK_COMMON;
 
-	gintsts = readl(hsotg->regs + GINTSTS);
-	gintmsk = readl(hsotg->regs + GINTMSK);
-	gahbcfg = readl(hsotg->regs + GAHBCFG);
+	gintsts = dwc2_readl(hsotg->regs + GINTSTS);
+	gintmsk = dwc2_readl(hsotg->regs + GINTMSK);
+	gahbcfg = dwc2_readl(hsotg->regs + GAHBCFG);
 
 	/* If any common interrupts set */
 	if (gintsts & gintmsk_common)

drivers/usb/dwc2/debugfs.c

@@ -57,7 +57,7 @@ static ssize_t testmode_write(struct file *file, const char __user *ubuf, size_t
 		testmode = 0;
 
 	spin_lock_irqsave(&hsotg->lock, flags);
-	s3c_hsotg_set_test_mode(hsotg, testmode);
+	dwc2_hsotg_set_test_mode(hsotg, testmode);
 	spin_unlock_irqrestore(&hsotg->lock, flags);
 	return count;
 }
@@ -76,7 +76,7 @@ static int testmode_show(struct seq_file *s, void *unused)
 	int dctl;
 
 	spin_lock_irqsave(&hsotg->lock, flags);
-	dctl = readl(hsotg->regs + DCTL);
+	dctl = dwc2_readl(hsotg->regs + DCTL);
 	dctl &= DCTL_TSTCTL_MASK;
 	dctl >>= DCTL_TSTCTL_SHIFT;
 	spin_unlock_irqrestore(&hsotg->lock, flags);
@@ -137,38 +137,38 @@ static int state_show(struct seq_file *seq, void *v)
 	int idx;
 
 	seq_printf(seq, "DCFG=0x%08x, DCTL=0x%08x, DSTS=0x%08x\n",
-		 readl(regs + DCFG),
-		 readl(regs + DCTL),
-		 readl(regs + DSTS));
+		 dwc2_readl(regs + DCFG),
+		 dwc2_readl(regs + DCTL),
+		 dwc2_readl(regs + DSTS));
 
 	seq_printf(seq, "DIEPMSK=0x%08x, DOEPMASK=0x%08x\n",
-		   readl(regs + DIEPMSK), readl(regs + DOEPMSK));
+		   dwc2_readl(regs + DIEPMSK), dwc2_readl(regs + DOEPMSK));
 
 	seq_printf(seq, "GINTMSK=0x%08x, GINTSTS=0x%08x\n",
-		   readl(regs + GINTMSK),
-		   readl(regs + GINTSTS));
+		   dwc2_readl(regs + GINTMSK),
+		   dwc2_readl(regs + GINTSTS));
 
 	seq_printf(seq, "DAINTMSK=0x%08x, DAINT=0x%08x\n",
-		   readl(regs + DAINTMSK),
-		   readl(regs + DAINT));
+		   dwc2_readl(regs + DAINTMSK),
+		   dwc2_readl(regs + DAINT));
 
 	seq_printf(seq, "GNPTXSTS=0x%08x, GRXSTSR=%08x\n",
-		   readl(regs + GNPTXSTS),
-		   readl(regs + GRXSTSR));
+		   dwc2_readl(regs + GNPTXSTS),
+		   dwc2_readl(regs + GRXSTSR));
 
 	seq_puts(seq, "\nEndpoint status:\n");
 
 	for (idx = 0; idx < hsotg->num_of_eps; idx++) {
 		u32 in, out;
 
-		in = readl(regs + DIEPCTL(idx));
-		out = readl(regs + DOEPCTL(idx));
+		in = dwc2_readl(regs + DIEPCTL(idx));
+		out = dwc2_readl(regs + DOEPCTL(idx));
 
 		seq_printf(seq, "ep%d: DIEPCTL=0x%08x, DOEPCTL=0x%08x",
 			   idx, in, out);
 
-		in = readl(regs + DIEPTSIZ(idx));
-		out = readl(regs + DOEPTSIZ(idx));
+		in = dwc2_readl(regs + DIEPTSIZ(idx));
+		out = dwc2_readl(regs + DOEPTSIZ(idx));
 
 		seq_printf(seq, ", DIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x",
 			   in, out);
@@ -208,9 +208,9 @@ static int fifo_show(struct seq_file *seq, void *v)
 	int idx;
 
 	seq_puts(seq, "Non-periodic FIFOs:\n");
-	seq_printf(seq, "RXFIFO: Size %d\n", readl(regs + GRXFSIZ));
+	seq_printf(seq, "RXFIFO: Size %d\n", dwc2_readl(regs + GRXFSIZ));
 
-	val = readl(regs + GNPTXFSIZ);
+	val = dwc2_readl(regs + GNPTXFSIZ);
 	seq_printf(seq, "NPTXFIFO: Size %d, Start 0x%08x\n",
 		   val >> FIFOSIZE_DEPTH_SHIFT,
 		   val & FIFOSIZE_DEPTH_MASK);
@@ -218,7 +218,7 @@ static int fifo_show(struct seq_file *seq, void *v)
 	seq_puts(seq, "\nPeriodic TXFIFOs:\n");
 
 	for (idx = 1; idx < hsotg->num_of_eps; idx++) {
-		val = readl(regs + DPTXFSIZN(idx));
+		val = dwc2_readl(regs + DPTXFSIZN(idx));
 
 		seq_printf(seq, "\tDPTXFIFO%2d: Size %d, Start 0x%08x\n", idx,
 			   val >> FIFOSIZE_DEPTH_SHIFT,
@@ -256,9 +256,9 @@ static const char *decode_direction(int is_in)
  */
 static int ep_show(struct seq_file *seq, void *v)
 {
-	struct s3c_hsotg_ep *ep = seq->private;
+	struct dwc2_hsotg_ep *ep = seq->private;
 	struct dwc2_hsotg *hsotg = ep->parent;
-	struct s3c_hsotg_req *req;
+	struct dwc2_hsotg_req *req;
 	void __iomem *regs = hsotg->regs;
 	int index = ep->index;
 	int show_limit = 15;
@@ -270,20 +270,20 @@ static int ep_show(struct seq_file *seq, void *v)
 	/* first show the register state */
 
 	seq_printf(seq, "\tDIEPCTL=0x%08x, DOEPCTL=0x%08x\n",
-		   readl(regs + DIEPCTL(index)),
-		   readl(regs + DOEPCTL(index)));
+		   dwc2_readl(regs + DIEPCTL(index)),
+		   dwc2_readl(regs + DOEPCTL(index)));
 
 	seq_printf(seq, "\tDIEPDMA=0x%08x, DOEPDMA=0x%08x\n",
-		   readl(regs + DIEPDMA(index)),
-		   readl(regs + DOEPDMA(index)));
+		   dwc2_readl(regs + DIEPDMA(index)),
+		   dwc2_readl(regs + DOEPDMA(index)));
 
 	seq_printf(seq, "\tDIEPINT=0x%08x, DOEPINT=0x%08x\n",
-		   readl(regs + DIEPINT(index)),
-		   readl(regs + DOEPINT(index)));
+		   dwc2_readl(regs + DIEPINT(index)),
+		   dwc2_readl(regs + DOEPINT(index)));
 
 	seq_printf(seq, "\tDIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x\n",
-		   readl(regs + DIEPTSIZ(index)),
-		   readl(regs + DOEPTSIZ(index)));
+		   dwc2_readl(regs + DIEPTSIZ(index)),
+		   dwc2_readl(regs + DOEPTSIZ(index)));
 
 	seq_puts(seq, "\n");
 	seq_printf(seq, "mps %d\n", ep->ep.maxpacket);
@@ -326,7 +326,7 @@ static const struct file_operations ep_fops = {
 };
 
 /**
- * s3c_hsotg_create_debug - create debugfs directory and files
+ * dwc2_hsotg_create_debug - create debugfs directory and files
  * @hsotg: The driver state
  *
  * Create the debugfs files to allow the user to get information
@@ -334,7 +334,7 @@ static const struct file_operations ep_fops = {
  * with the same name as the device itself, in case we end up
  * with multiple blocks in future systems.
  */
-static void s3c_hsotg_create_debug(struct dwc2_hsotg *hsotg)
+static void dwc2_hsotg_create_debug(struct dwc2_hsotg *hsotg)
 {
 	struct dentry *root;
 	struct dentry *file;
@@ -360,7 +360,7 @@ static void s3c_hsotg_create_debug(struct dwc2_hsotg *hsotg)
 
 	/* Create one file for each out endpoint */
 	for (epidx = 0; epidx < hsotg->num_of_eps; epidx++) {
-		struct s3c_hsotg_ep *ep;
+		struct dwc2_hsotg_ep *ep;
 
 		ep = hsotg->eps_out[epidx];
 		if (ep) {
@@ -373,7 +373,7 @@ static void s3c_hsotg_create_debug(struct dwc2_hsotg *hsotg)
 	}
 	/* Create one file for each in endpoint. EP0 is handled with out eps */
 	for (epidx = 1; epidx < hsotg->num_of_eps; epidx++) {
-		struct s3c_hsotg_ep *ep;
+		struct dwc2_hsotg_ep *ep;
 
 		ep = hsotg->eps_in[epidx];
 		if (ep) {
@@ -386,10 +386,10 @@ static void s3c_hsotg_create_debug(struct dwc2_hsotg *hsotg)
 	}
 }
 #else
-static inline void s3c_hsotg_create_debug(struct dwc2_hsotg *hsotg) {}
+static inline void dwc2_hsotg_create_debug(struct dwc2_hsotg *hsotg) {}
 #endif
 
-/* s3c_hsotg_delete_debug is removed as cleanup in done in dwc2_debugfs_exit */
+/* dwc2_hsotg_delete_debug is removed as cleanup in done in dwc2_debugfs_exit */
 
 #define dump_register(nm)	\
 {				\
@@ -737,7 +737,7 @@ int dwc2_debugfs_init(struct dwc2_hsotg *hsotg)
 	}
 
 	/* Add gadget debugfs nodes */
-	s3c_hsotg_create_debug(hsotg);
+	dwc2_hsotg_create_debug(hsotg);
 
 	hsotg->regset = devm_kzalloc(hsotg->dev, sizeof(*hsotg->regset),
 								GFP_KERNEL);

drivers/usb/dwc2/hcd.h

@@ -371,10 +371,10 @@ static inline struct usb_hcd *dwc2_hsotg_to_hcd(struct dwc2_hsotg *hsotg)
  */
 static inline void disable_hc_int(struct dwc2_hsotg *hsotg, int chnum, u32 intr)
 {
-	u32 mask = readl(hsotg->regs + HCINTMSK(chnum));
+	u32 mask = dwc2_readl(hsotg->regs + HCINTMSK(chnum));
 
 	mask &= ~intr;
-	writel(mask, hsotg->regs + HCINTMSK(chnum));
+	dwc2_writel(mask, hsotg->regs + HCINTMSK(chnum));
 }
 
 /*
@@ -382,11 +382,11 @@ static inline void disable_hc_int(struct dwc2_hsotg *hsotg, int chnum, u32 intr)
  */
 static inline int dwc2_is_host_mode(struct dwc2_hsotg *hsotg)
 {
-	return (readl(hsotg->regs + GINTSTS) & GINTSTS_CURMODE_HOST) != 0;
+	return (dwc2_readl(hsotg->regs + GINTSTS) & GINTSTS_CURMODE_HOST) != 0;
 }
 static inline int dwc2_is_device_mode(struct dwc2_hsotg *hsotg)
 {
-	return (readl(hsotg->regs + GINTSTS) & GINTSTS_CURMODE_HOST) == 0;
+	return (dwc2_readl(hsotg->regs + GINTSTS) & GINTSTS_CURMODE_HOST) == 0;
 }
 
 /*
@@ -395,7 +395,7 @@ static inline int dwc2_is_device_mode(struct dwc2_hsotg *hsotg)
  */
 static inline u32 dwc2_read_hprt0(struct dwc2_hsotg *hsotg)
 {
-	u32 hprt0 = readl(hsotg->regs + HPRT0);
+	u32 hprt0 = dwc2_readl(hsotg->regs + HPRT0);
 
 	hprt0 &= ~(HPRT0_ENA | HPRT0_CONNDET | HPRT0_ENACHG | HPRT0_OVRCURRCHG);
 	return hprt0;
@@ -580,7 +580,8 @@ static inline u16 dwc2_micro_frame_num(u16 frame)
  */
 static inline u32 dwc2_read_core_intr(struct dwc2_hsotg *hsotg)
 {
-	return readl(hsotg->regs + GINTSTS) & readl(hsotg->regs + GINTMSK);
+	return dwc2_readl(hsotg->regs + GINTSTS) &
+	       dwc2_readl(hsotg->regs + GINTMSK);
 }
 
 static inline u32 dwc2_hcd_urb_get_status(struct dwc2_hcd_urb *dwc2_urb)
@@ -732,7 +733,7 @@ do {									\
 			   qtd_list_entry);				\
 	if (usb_pipeint(_qtd_->urb->pipe) &&				\
 	    (_qh_)->start_split_frame != 0 && !_qtd_->complete_split) {	\
-		_hfnum_.d32 = readl((_hcd_)->regs + HFNUM);		\
+		_hfnum_.d32 = dwc2_readl((_hcd_)->regs + HFNUM);	\
 		switch (_hfnum_.b.frnum & 0x7) {			\
 		case 7:							\
 			(_hcd_)->hfnum_7_samples_##_letter_++;		\

drivers/usb/dwc2/hcd_ddma.c

@@ -169,19 +169,19 @@ static void dwc2_per_sched_enable(struct dwc2_hsotg *hsotg, u32 fr_list_en)
 
 	spin_lock_irqsave(&hsotg->lock, flags);
 
-	hcfg = readl(hsotg->regs + HCFG);
+	hcfg = dwc2_readl(hsotg->regs + HCFG);
 	if (hcfg & HCFG_PERSCHEDENA) {
 		/* already enabled */
 		spin_unlock_irqrestore(&hsotg->lock, flags);
 		return;
 	}
 
-	writel(hsotg->frame_list_dma, hsotg->regs + HFLBADDR);
+	dwc2_writel(hsotg->frame_list_dma, hsotg->regs + HFLBADDR);
 
 	hcfg &= ~HCFG_FRLISTEN_MASK;
 	hcfg |= fr_list_en | HCFG_PERSCHEDENA;
 	dev_vdbg(hsotg->dev, "Enabling Periodic schedule\n");
-	writel(hcfg, hsotg->regs + HCFG);
+	dwc2_writel(hcfg, hsotg->regs + HCFG);
 
 	spin_unlock_irqrestore(&hsotg->lock, flags);
 }
@@ -193,7 +193,7 @@ static void dwc2_per_sched_disable(struct dwc2_hsotg *hsotg)
 
 	spin_lock_irqsave(&hsotg->lock, flags);
 
-	hcfg = readl(hsotg->regs + HCFG);
+	hcfg = dwc2_readl(hsotg->regs + HCFG);
 	if (!(hcfg & HCFG_PERSCHEDENA)) {
 		/* already disabled */
 		spin_unlock_irqrestore(&hsotg->lock, flags);
@@ -202,7 +202,7 @@ static void dwc2_per_sched_disable(struct dwc2_hsotg *hsotg)
 
 	hcfg &= ~HCFG_PERSCHEDENA;
 	dev_vdbg(hsotg->dev, "Disabling Periodic schedule\n");
-	writel(hcfg, hsotg->regs + HCFG);
+	dwc2_writel(hcfg, hsotg->regs + HCFG);
 
 	spin_unlock_irqrestore(&hsotg->lock, flags);
 }

drivers/usb/dwc2/hcd_queue.c

@@ -106,6 +106,9 @@ static void dwc2_qh_init(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh,
 				USB_SPEED_HIGH : dev_speed, qh->ep_is_in,
 				qh->ep_type == USB_ENDPOINT_XFER_ISOC,
 				bytecount));
+
+		/* Ensure frame_number corresponds to the reality */
+		hsotg->frame_number = dwc2_hcd_get_frame_number(hsotg);
 		/* Start in a slightly future (micro)frame */
 		qh->sched_frame = dwc2_frame_num_inc(hsotg->frame_number,
 						     SCHEDULE_SLOP);
@@ -115,7 +118,7 @@ static void dwc2_qh_init(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh,
 		if (qh->ep_type == USB_ENDPOINT_XFER_INT)
 			qh->interval = 8;
 #endif
-		hprt = readl(hsotg->regs + HPRT0);
+		hprt = dwc2_readl(hsotg->regs + HPRT0);
 		prtspd = (hprt & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT;
 		if (prtspd == HPRT0_SPD_HIGH_SPEED &&
 		    (dev_speed == USB_SPEED_LOW ||
@@ -583,6 +586,14 @@ int dwc2_hcd_qh_add(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
 		/* QH already in a schedule */
 		return 0;
 
+	if (!dwc2_frame_num_le(qh->sched_frame, hsotg->frame_number) &&
+			!hsotg->frame_number) {
+		dev_dbg(hsotg->dev,
+				"reset frame number counter\n");
+		qh->sched_frame = dwc2_frame_num_inc(hsotg->frame_number,
+				SCHEDULE_SLOP);
+	}
+
 	/* Add the new QH to the appropriate schedule */
 	if (dwc2_qh_is_non_per(qh)) {
 		/* Always start in inactive schedule */
@@ -595,9 +606,9 @@ int dwc2_hcd_qh_add(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
 	if (status)
 		return status;
 	if (!hsotg->periodic_qh_count) {
-		intr_mask = readl(hsotg->regs + GINTMSK);
+		intr_mask = dwc2_readl(hsotg->regs + GINTMSK);
 		intr_mask |= GINTSTS_SOF;
-		writel(intr_mask, hsotg->regs + GINTMSK);
+		dwc2_writel(intr_mask, hsotg->regs + GINTMSK);
 	}
 	hsotg->periodic_qh_count++;
 
@@ -632,9 +643,9 @@ void dwc2_hcd_qh_unlink(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
 	dwc2_deschedule_periodic(hsotg, qh);
 	hsotg->periodic_qh_count--;
 	if (!hsotg->periodic_qh_count) {
-		intr_mask = readl(hsotg->regs + GINTMSK);
+		intr_mask = dwc2_readl(hsotg->regs + GINTMSK);
 		intr_mask &= ~GINTSTS_SOF;
-		writel(intr_mask, hsotg->regs + GINTMSK);
+		dwc2_writel(intr_mask, hsotg->regs + GINTMSK);
 	}
 }
 

drivers/usb/dwc2/hw.h

@@ -142,6 +142,7 @@
 #define GINTSTS_RESETDET		(1 << 23)
 #define GINTSTS_FET_SUSP		(1 << 22)
 #define GINTSTS_INCOMPL_IP		(1 << 21)
+#define GINTSTS_INCOMPL_SOOUT		(1 << 21)
 #define GINTSTS_INCOMPL_SOIN		(1 << 20)
 #define GINTSTS_OEPINT			(1 << 19)
 #define GINTSTS_IEPINT			(1 << 18)

drivers/usb/dwc3/core.h

@@ -108,6 +108,9 @@
 #define DWC3_GPRTBIMAP_FS0	0xc188
 #define DWC3_GPRTBIMAP_FS1	0xc18c
 
+#define DWC3_VER_NUMBER		0xc1a0
+#define DWC3_VER_TYPE		0xc1a4
+
 #define DWC3_GUSB2PHYCFG(n)	(0xc200 + (n * 0x04))
 #define DWC3_GUSB2I2CCTL(n)	(0xc240 + (n * 0x04))
 
@@ -124,6 +127,7 @@
 #define DWC3_GEVNTCOUNT(n)	(0xc40c + (n * 0x10))
 
 #define DWC3_GHWPARAMS8		0xc600
+#define DWC3_GFLADJ		0xc630
 
 /* Device Registers */
 #define DWC3_DCFG		0xc700
@@ -175,6 +179,7 @@
 #define DWC3_GUSB2PHYCFG_PHYSOFTRST	(1 << 31)
 #define DWC3_GUSB2PHYCFG_SUSPHY		(1 << 6)
 #define DWC3_GUSB2PHYCFG_ULPI_UTMI	(1 << 4)
+#define DWC3_GUSB2PHYCFG_ENBLSLPM	(1 << 8)
 
 /* Global USB2 PHY Vendor Control Register */
 #define DWC3_GUSB2PHYACC_NEWREGREQ	(1 << 25)
@@ -234,6 +239,10 @@
 /* Global HWPARAMS6 Register */
 #define DWC3_GHWPARAMS6_EN_FPGA			(1 << 7)
 
+/* Global Frame Length Adjustment Register */
+#define DWC3_GFLADJ_30MHZ_SDBND_SEL		(1 << 7)
+#define DWC3_GFLADJ_30MHZ_MASK			0x3f
+
 /* Device Configuration Register */
 #define DWC3_DCFG_DEVADDR(addr)	((addr) << 3)
 #define DWC3_DCFG_DEVADDR_MASK	DWC3_DCFG_DEVADDR(0x7f)
@@ -712,6 +721,8 @@ struct dwc3_scratchpad_array {
  * @rx_detect_poll_quirk: set if we enable rx_detect to polling lfps quirk
  * @dis_u3_susphy_quirk: set if we disable usb3 suspend phy
  * @dis_u2_susphy_quirk: set if we disable usb2 suspend phy
+ * @dis_enblslpm_quirk: set if we clear enblslpm in GUSB2PHYCFG,
+ *                      disabling the suspend signal to the PHY.
  * @tx_de_emphasis_quirk: set if we enable Tx de-emphasis quirk
  * @tx_de_emphasis: Tx de-emphasis value
  * 	0	- -6dB de-emphasis
@@ -766,6 +777,14 @@ struct dwc3 {
 	u32			num_event_buffers;
 	u32			u1u2;
 	u32			maximum_speed;
+
+	/*
+	 * All 3.1 IP version constants are greater than the 3.0 IP
+	 * version constants. This works for most version checks in
+	 * dwc3. However, in the future, this may not apply as
+	 * features may be developed on newer versions of the 3.0 IP
+	 * that are not in the 3.1 IP.
+	 */
 	u32			revision;
 
 #define DWC3_REVISION_173A	0x5533173a
@@ -788,6 +807,13 @@ struct dwc3 {
 #define DWC3_REVISION_270A	0x5533270a
 #define DWC3_REVISION_280A	0x5533280a
 
+/*
+ * NOTICE: we're using bit 31 as a "is usb 3.1" flag. This is really
+ * just so dwc31 revisions are always larger than dwc3.
+ */
+#define DWC3_REVISION_IS_DWC31		0x80000000
+#define DWC3_USB31_REVISION_110A	(0x3131302a | DWC3_REVISION_IS_USB31)
+
 	enum dwc3_ep0_next	ep0_next_event;
 	enum dwc3_ep0_state	ep0state;
 	enum dwc3_link_state	link_state;
@@ -841,6 +867,7 @@ struct dwc3 {
 	unsigned		rx_detect_poll_quirk:1;
 	unsigned		dis_u3_susphy_quirk:1;
 	unsigned		dis_u2_susphy_quirk:1;
+	unsigned		dis_enblslpm_quirk:1;
 
 	unsigned		tx_de_emphasis_quirk:1;
 	unsigned		tx_de_emphasis:2;

drivers/usb/dwc3/platform_data.h

@@ -42,9 +42,12 @@ struct dwc3_platform_data {
 	unsigned rx_detect_poll_quirk:1;
 	unsigned dis_u3_susphy_quirk:1;
 	unsigned dis_u2_susphy_quirk:1;
+	unsigned dis_enblslpm_quirk:1;
 
 	unsigned tx_de_emphasis_quirk:1;
 	unsigned tx_de_emphasis:2;
 
+	u32 fladj_value;
+
 	const char *hsphy_interface;
 };

drivers/usb/gadget/Kconfig

@@ -113,7 +113,7 @@ config USB_GADGET_VBUS_DRAW
 
 config USB_GADGET_STORAGE_NUM_BUFFERS
 	int "Number of storage pipeline buffers"
-	range 2 4
+	range 2 32
 	default 2
 	help
 	   Usually 2 buffers are enough to establish a good buffering

drivers/usb/gadget/udc/Kconfig

@@ -55,7 +55,7 @@ config USB_LPC32XX
 
 config USB_ATMEL_USBA
 	tristate "Atmel USBA"
-	depends on AVR32 || ARCH_AT91
+	depends on ((AVR32 && !OF) || ARCH_AT91)
 	help
 	  USBA is the integrated high-speed USB Device controller on
 	  the AT32AP700x, some AT91SAM9 and AT91CAP9 processors from Atmel.