Commit 3e0d98b9 authored by Paul Jackson's avatar Paul Jackson Committed by Linus Torvalds

[PATCH] cpuset: memory pressure meter

Provide a simple per-cpuset metric of memory pressure, tracking the -rate-
that the tasks in a cpuset call try_to_free_pages(), the synchronous
(direct) memory reclaim code.

This enables batch managers monitoring jobs running in dedicated cpusets to
efficiently detect what level of memory pressure that job is causing.

This is useful both on tightly managed systems running a wide mix of
submitted jobs, which may choose to terminate or reprioritize jobs that are
trying to use more memory than allowed on the nodes assigned them, and with
tightly coupled, long running, massively parallel scientific computing jobs
that will dramatically fail to meet required performance goals if they
start to use more memory than allowed to them.

This patch just provides a very economical way for the batch manager to
monitor a cpuset for signs of memory pressure.  It's up to the batch
manager or other user code to decide what to do about it and take action.

==> Unless this feature is enabled by writing "1" to the special file
    /dev/cpuset/memory_pressure_enabled, the hook in the rebalance
    code of __alloc_pages() for this metric reduces to simply noticing
    that the cpuset_memory_pressure_enabled flag is zero.  So only
    systems that enable this feature will compute the metric.

Why a per-cpuset, running average:

    Because this meter is per-cpuset, rather than per-task or mm, the
    system load imposed by a batch scheduler monitoring this metric is
    sharply reduced on large systems, because a scan of the tasklist can be
    avoided on each set of queries.

    Because this meter is a running average, instead of an accumulating
    counter, a batch scheduler can detect memory pressure with a single
    read, instead of having to read and accumulate results for a period of
    time.

    Because this meter is per-cpuset rather than per-task or mm, the
    batch scheduler can obtain the key information, memory pressure in a
    cpuset, with a single read, rather than having to query and accumulate
    results over all the (dynamically changing) set of tasks in the cpuset.

A per-cpuset simple digital filter (requires a spinlock and 3 words of data
per-cpuset) is kept, and updated by any task attached to that cpuset, if it
enters the synchronous (direct) page reclaim code.

A per-cpuset file provides an integer number representing the recent
(half-life of 10 seconds) rate of direct page reclaims caused by the tasks
in the cpuset, in units of reclaims attempted per second, times 1000.
Signed-off-by: default avatarPaul Jackson <pj@sgi.com>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent 5966514d
......@@ -26,6 +26,15 @@ void cpuset_update_current_mems_allowed(void);
int cpuset_zonelist_valid_mems_allowed(struct zonelist *zl);
extern int cpuset_zone_allowed(struct zone *z, gfp_t gfp_mask);
extern int cpuset_excl_nodes_overlap(const struct task_struct *p);
#define cpuset_memory_pressure_bump() \
do { \
if (cpuset_memory_pressure_enabled) \
__cpuset_memory_pressure_bump(); \
} while (0)
extern int cpuset_memory_pressure_enabled;
extern void __cpuset_memory_pressure_bump(void);
extern struct file_operations proc_cpuset_operations;
extern char *cpuset_task_status_allowed(struct task_struct *task, char *buffer);
......@@ -60,6 +69,8 @@ static inline int cpuset_excl_nodes_overlap(const struct task_struct *p)
return 1;
}
static inline void cpuset_memory_pressure_bump(void) {}
static inline char *cpuset_task_status_allowed(struct task_struct *task,
char *buffer)
{
......
......@@ -56,6 +56,15 @@
#define CPUSET_SUPER_MAGIC 0x27e0eb
/* See "Frequency meter" comments, below. */
struct fmeter {
int cnt; /* unprocessed events count */
int val; /* most recent output value */
time_t time; /* clock (secs) when val computed */
spinlock_t lock; /* guards read or write of above */
};
struct cpuset {
unsigned long flags; /* "unsigned long" so bitops work */
cpumask_t cpus_allowed; /* CPUs allowed to tasks in cpuset */
......@@ -81,6 +90,8 @@ struct cpuset {
* recent time this cpuset changed its mems_allowed.
*/
int mems_generation;
struct fmeter fmeter; /* memory_pressure filter */
};
/* bits in struct cpuset flags field */
......@@ -149,7 +160,7 @@ static struct cpuset top_cpuset = {
};
static struct vfsmount *cpuset_mount;
static struct super_block *cpuset_sb = NULL;
static struct super_block *cpuset_sb;
/*
* We have two global cpuset semaphores below. They can nest.
......@@ -806,6 +817,19 @@ static int update_nodemask(struct cpuset *cs, char *buf)
return retval;
}
/*
* Call with manage_sem held.
*/
static int update_memory_pressure_enabled(struct cpuset *cs, char *buf)
{
if (simple_strtoul(buf, NULL, 10) != 0)
cpuset_memory_pressure_enabled = 1;
else
cpuset_memory_pressure_enabled = 0;
return 0;
}
/*
* update_flag - read a 0 or a 1 in a file and update associated flag
* bit: the bit to update (CS_CPU_EXCLUSIVE, CS_MEM_EXCLUSIVE,
......@@ -847,6 +871,104 @@ static int update_flag(cpuset_flagbits_t bit, struct cpuset *cs, char *buf)
return 0;
}
/*
* Frequency meter - How fast is some event occuring?
*
* These routines manage a digitally filtered, constant time based,
* event frequency meter. There are four routines:
* fmeter_init() - initialize a frequency meter.
* fmeter_markevent() - called each time the event happens.
* fmeter_getrate() - returns the recent rate of such events.
* fmeter_update() - internal routine used to update fmeter.
*
* A common data structure is passed to each of these routines,
* which is used to keep track of the state required to manage the
* frequency meter and its digital filter.
*
* The filter works on the number of events marked per unit time.
* The filter is single-pole low-pass recursive (IIR). The time unit
* is 1 second. Arithmetic is done using 32-bit integers scaled to
* simulate 3 decimal digits of precision (multiplied by 1000).
*
* With an FM_COEF of 933, and a time base of 1 second, the filter
* has a half-life of 10 seconds, meaning that if the events quit
* happening, then the rate returned from the fmeter_getrate()
* will be cut in half each 10 seconds, until it converges to zero.
*
* It is not worth doing a real infinitely recursive filter. If more
* than FM_MAXTICKS ticks have elapsed since the last filter event,
* just compute FM_MAXTICKS ticks worth, by which point the level
* will be stable.
*
* Limit the count of unprocessed events to FM_MAXCNT, so as to avoid
* arithmetic overflow in the fmeter_update() routine.
*
* Given the simple 32 bit integer arithmetic used, this meter works
* best for reporting rates between one per millisecond (msec) and
* one per 32 (approx) seconds. At constant rates faster than one
* per msec it maxes out at values just under 1,000,000. At constant
* rates between one per msec, and one per second it will stabilize
* to a value N*1000, where N is the rate of events per second.
* At constant rates between one per second and one per 32 seconds,
* it will be choppy, moving up on the seconds that have an event,
* and then decaying until the next event. At rates slower than
* about one in 32 seconds, it decays all the way back to zero between
* each event.
*/
#define FM_COEF 933 /* coefficient for half-life of 10 secs */
#define FM_MAXTICKS ((time_t)99) /* useless computing more ticks than this */
#define FM_MAXCNT 1000000 /* limit cnt to avoid overflow */
#define FM_SCALE 1000 /* faux fixed point scale */
/* Initialize a frequency meter */
static void fmeter_init(struct fmeter *fmp)
{
fmp->cnt = 0;
fmp->val = 0;
fmp->time = 0;
spin_lock_init(&fmp->lock);
}
/* Internal meter update - process cnt events and update value */
static void fmeter_update(struct fmeter *fmp)
{
time_t now = get_seconds();
time_t ticks = now - fmp->time;
if (ticks == 0)
return;
ticks = min(FM_MAXTICKS, ticks);
while (ticks-- > 0)
fmp->val = (FM_COEF * fmp->val) / FM_SCALE;
fmp->time = now;
fmp->val += ((FM_SCALE - FM_COEF) * fmp->cnt) / FM_SCALE;
fmp->cnt = 0;
}
/* Process any previous ticks, then bump cnt by one (times scale). */
static void fmeter_markevent(struct fmeter *fmp)
{
spin_lock(&fmp->lock);
fmeter_update(fmp);
fmp->cnt = min(FM_MAXCNT, fmp->cnt + FM_SCALE);
spin_unlock(&fmp->lock);
}
/* Process any previous ticks, then return current value. */
static int fmeter_getrate(struct fmeter *fmp)
{
int val;
spin_lock(&fmp->lock);
fmeter_update(fmp);
val = fmp->val;
spin_unlock(&fmp->lock);
return val;
}
/*
* Attack task specified by pid in 'pidbuf' to cpuset 'cs', possibly
* writing the path of the old cpuset in 'ppathbuf' if it needs to be
......@@ -931,6 +1053,8 @@ typedef enum {
FILE_CPU_EXCLUSIVE,
FILE_MEM_EXCLUSIVE,
FILE_NOTIFY_ON_RELEASE,
FILE_MEMORY_PRESSURE_ENABLED,
FILE_MEMORY_PRESSURE,
FILE_TASKLIST,
} cpuset_filetype_t;
......@@ -984,6 +1108,12 @@ static ssize_t cpuset_common_file_write(struct file *file, const char __user *us
case FILE_MEMORY_MIGRATE:
retval = update_flag(CS_MEMORY_MIGRATE, cs, buffer);
break;
case FILE_MEMORY_PRESSURE_ENABLED:
retval = update_memory_pressure_enabled(cs, buffer);
break;
case FILE_MEMORY_PRESSURE:
retval = -EACCES;
break;
case FILE_TASKLIST:
retval = attach_task(cs, buffer, &pathbuf);
break;
......@@ -1087,6 +1217,12 @@ static ssize_t cpuset_common_file_read(struct file *file, char __user *buf,
case FILE_MEMORY_MIGRATE:
*s++ = is_memory_migrate(cs) ? '1' : '0';
break;
case FILE_MEMORY_PRESSURE_ENABLED:
*s++ = cpuset_memory_pressure_enabled ? '1' : '0';
break;
case FILE_MEMORY_PRESSURE:
s += sprintf(s, "%d", fmeter_getrate(&cs->fmeter));
break;
default:
retval = -EINVAL;
goto out;
......@@ -1440,6 +1576,16 @@ static struct cftype cft_memory_migrate = {
.private = FILE_MEMORY_MIGRATE,
};
static struct cftype cft_memory_pressure_enabled = {
.name = "memory_pressure_enabled",
.private = FILE_MEMORY_PRESSURE_ENABLED,
};
static struct cftype cft_memory_pressure = {
.name = "memory_pressure",
.private = FILE_MEMORY_PRESSURE,
};
static int cpuset_populate_dir(struct dentry *cs_dentry)
{
int err;
......@@ -1456,6 +1602,8 @@ static int cpuset_populate_dir(struct dentry *cs_dentry)
return err;
if ((err = cpuset_add_file(cs_dentry, &cft_memory_migrate)) < 0)
return err;
if ((err = cpuset_add_file(cs_dentry, &cft_memory_pressure)) < 0)
return err;
if ((err = cpuset_add_file(cs_dentry, &cft_tasks)) < 0)
return err;
return 0;
......@@ -1491,6 +1639,7 @@ static long cpuset_create(struct cpuset *parent, const char *name, int mode)
INIT_LIST_HEAD(&cs->children);
atomic_inc(&cpuset_mems_generation);
cs->mems_generation = atomic_read(&cpuset_mems_generation);
fmeter_init(&cs->fmeter);
cs->parent = parent;
......@@ -1580,6 +1729,7 @@ int __init cpuset_init(void)
top_cpuset.cpus_allowed = CPU_MASK_ALL;
top_cpuset.mems_allowed = NODE_MASK_ALL;
fmeter_init(&top_cpuset.fmeter);
atomic_inc(&cpuset_mems_generation);
top_cpuset.mems_generation = atomic_read(&cpuset_mems_generation);
......@@ -1601,6 +1751,9 @@ int __init cpuset_init(void)
top_cpuset.dentry = root;
root->d_inode->i_op = &cpuset_dir_inode_operations;
err = cpuset_populate_dir(root);
/* memory_pressure_enabled is in root cpuset only */
if (err == 0)
err = cpuset_add_file(root, &cft_memory_pressure_enabled);
out:
return err;
}
......@@ -1890,6 +2043,42 @@ int cpuset_excl_nodes_overlap(const struct task_struct *p)
return overlap;
}
/*
* Collection of memory_pressure is suppressed unless
* this flag is enabled by writing "1" to the special
* cpuset file 'memory_pressure_enabled' in the root cpuset.
*/
int cpuset_memory_pressure_enabled;
/**
* cpuset_memory_pressure_bump - keep stats of per-cpuset reclaims.
*
* Keep a running average of the rate of synchronous (direct)
* page reclaim efforts initiated by tasks in each cpuset.
*
* This represents the rate at which some task in the cpuset
* ran low on memory on all nodes it was allowed to use, and
* had to enter the kernels page reclaim code in an effort to
* create more free memory by tossing clean pages or swapping
* or writing dirty pages.
*
* Display to user space in the per-cpuset read-only file
* "memory_pressure". Value displayed is an integer
* representing the recent rate of entry into the synchronous
* (direct) page reclaim by any task attached to the cpuset.
**/
void __cpuset_memory_pressure_bump(void)
{
struct cpuset *cs;
task_lock(current);
cs = current->cpuset;
fmeter_markevent(&cs->fmeter);
task_unlock(current);
}
/*
* proc_cpuset_show()
* - Print tasks cpuset path into seq_file.
......
......@@ -976,6 +976,7 @@ __alloc_pages(gfp_t gfp_mask, unsigned int order,
cond_resched();
/* We now go into synchronous reclaim */
cpuset_memory_pressure_bump();
p->flags |= PF_MEMALLOC;
reclaim_state.reclaimed_slab = 0;
p->reclaim_state = &reclaim_state;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment