Commit 3ec9c594 authored by Andrey Panin's avatar Andrey Panin Committed by Russell King

[SERIAL] SIIG 8-port serial boards support

This patch adds support for SIIG 8-port boards. These boards have 4 ports in
separate bars and another 4 ports in the single bar. Because of this strange
port arrangement these cards need special setup function. Fortunately no other
SIIG cards have more than 4 port, so this setup function could be used for them
too.
Signed-off-by: default avatarAndrey Panin <pazke@donpac.ru>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent b4103333
...@@ -439,6 +439,20 @@ static int pci_siig_init(struct pci_dev *dev) ...@@ -439,6 +439,20 @@ static int pci_siig_init(struct pci_dev *dev)
return -ENODEV; return -ENODEV;
} }
static int pci_siig_setup(struct serial_private *priv,
struct pciserial_board *board,
struct uart_port *port, int idx)
{
unsigned int bar = FL_GET_BASE(board->flags) + idx, offset = 0;
if (idx > 3) {
bar = 4;
offset = (idx - 4) * 8;
}
return setup_port(priv, port, bar, offset, 0);
}
/* /*
* Timedia has an explosion of boards, and to avoid the PCI table from * Timedia has an explosion of boards, and to avoid the PCI table from
* growing *huge*, we use this function to collapse some 70 entries * growing *huge*, we use this function to collapse some 70 entries
...@@ -748,7 +762,7 @@ static struct pci_serial_quirk pci_serial_quirks[] = { ...@@ -748,7 +762,7 @@ static struct pci_serial_quirk pci_serial_quirks[] = {
.subvendor = PCI_ANY_ID, .subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID, .subdevice = PCI_ANY_ID,
.init = pci_siig_init, .init = pci_siig_init,
.setup = pci_default_setup, .setup = pci_siig_setup,
}, },
/* /*
* Titan cards * Titan cards
...@@ -2141,6 +2155,15 @@ static struct pci_device_id serial_pci_tbl[] = { ...@@ -2141,6 +2155,15 @@ static struct pci_device_id serial_pci_tbl[] = {
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_850, { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_4S_20x_850,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_bt_4_921600 }, pbn_b0_bt_4_921600 },
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_550,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_bt_8_921600 },
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_650,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_bt_8_921600 },
{ PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_8S_20x_850,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_bt_8_921600 },
/* /*
* Computone devices submitted by Doug McNash dmcnash@computone.com * Computone devices submitted by Doug McNash dmcnash@computone.com
......
...@@ -1670,6 +1670,9 @@ ...@@ -1670,6 +1670,9 @@
#define PCI_DEVICE_ID_SIIG_2S1P_20x_550 0x2060 #define PCI_DEVICE_ID_SIIG_2S1P_20x_550 0x2060
#define PCI_DEVICE_ID_SIIG_2S1P_20x_650 0x2061 #define PCI_DEVICE_ID_SIIG_2S1P_20x_650 0x2061
#define PCI_DEVICE_ID_SIIG_2S1P_20x_850 0x2062 #define PCI_DEVICE_ID_SIIG_2S1P_20x_850 0x2062
#define PCI_DEVICE_ID_SIIG_8S_20x_550 0x2080
#define PCI_DEVICE_ID_SIIG_8S_20x_650 0x2081
#define PCI_DEVICE_ID_SIIG_8S_20x_850 0x2082
#define PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL 0x2050 #define PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL 0x2050
#define PCI_VENDOR_ID_RADISYS 0x1331 #define PCI_VENDOR_ID_RADISYS 0x1331
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment