Skip to content

L
linux
Commit 3f437937 authored by Greg Kroah-Hartman's avatar Greg Kroah-Hartman
Browse files
Options

[PATCH] i2c i2c-i801.c: remove #ifdefs and fix all printk() to use dev_*().

parent b486a581
Show whitespace changes
Inline Side-by-side
Showing with 57 additions and 98 deletions
drivers/i2c/busses/i2c-i801.c
View file @ 3f437937
......@@ -152,14 +152,14 @@ static int i801_setup(struct pci_dev *dev)
pci_read_config_word(I801_dev, SMBBA, &i801_smba);
i801_smba &= 0xfff0;
if(i801_smba == 0) {
printk(KERN_ERR "i2c-i801.o: SMB base address uninitialized - upgrade BIOS or use force_addr=0xaddr\n");
dev_err(&dev->dev, "SMB base address uninitialized"
"- upgrade BIOS or use force_addr=0xaddr\n");
return -ENODEV;
}
}
if (check_region(i801_smba, (isich4 ? 16 : 8))) {
printk
(KERN_ERR "i2c-i801.o: I801_smb region 0x%x already in use!\n",
dev_err(&dev->dev, "I801_smb region 0x%x already in use!\n",
i801_smba);
error_return = -ENODEV;
goto END;
......@@ -174,28 +174,23 @@ static int i801_setup(struct pci_dev *dev)
pci_write_config_byte(I801_dev, SMBHSTCFG, temp & 0xfe);
pci_write_config_word(I801_dev, SMBBA, i801_smba);
pci_write_config_byte(I801_dev, SMBHSTCFG, temp | 0x01);
printk
(KERN_WARNING "i2c-i801.o: WARNING: I801 SMBus interface set to new "
"address %04x!\n", i801_smba);
dev_warn(&dev->dev, "WARNING: I801 SMBus interface set to "
"new address %04x!\n", i801_smba);
} else if ((temp & 1) == 0) {
pci_write_config_byte(I801_dev, SMBHSTCFG, temp | 1);
printk(KERN_WARNING "i2c-i801.o: enabling SMBus device\n");
dev_warn(&dev->dev, "enabling SMBus device\n");
}
request_region(i801_smba, (isich4 ? 16 : 8), "i801-smbus");
#ifdef DEBUG
if (temp & 0x02)
printk
(KERN_DEBUG "i2c-i801.o: I801 using Interrupt SMI# for SMBus.\n");
dev_dbg(&dev->dev, "I801 using Interrupt SMI# for SMBus.\n");
else
printk
(KERN_DEBUG "i2c-i801.o: I801 using PCI Interrupt for SMBus.\n");
dev_dbg(&dev->dev, "I801 using PCI Interrupt for SMBus.\n");
pci_read_config_byte(I801_dev, SMBREV, &temp);
printk(KERN_DEBUG "i2c-i801.o: SMBREV = 0x%X\n", temp);
printk(KERN_DEBUG "i2c-i801.o: I801_smba = 0x%X\n", i801_smba);
#endif /* DEBUG */
dev_dbg(&dev->dev, "SMBREV = 0x%X\n", temp);
dev_dbg(&dev->dev, "I801_smba = 0x%X\n", i801_smba);
END:
return error_return;
......@@ -214,30 +209,22 @@ int i801_transaction(void)
int result = 0;
int timeout = 0;
#ifdef DEBUG
printk
(KERN_DEBUG "i2c-i801.o: Transaction (pre): CNT=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, "
"DAT1=%02x\n", inb_p(SMBHSTCNT), inb_p(SMBHSTCMD),
inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1));
#endif
dev_dbg(&I801_dev->dev, "Transaction (pre): CNT=%02x, CMD=%02x,"
"ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
inb_p(SMBHSTDAT1));
/* Make sure the SMBus host is ready to start transmitting */
/* 0x1f = Failed, Bus_Err, Dev_Err, Intr, Host_Busy */
if ((temp = (0x1f & inb_p(SMBHSTSTS))) != 0x00) {
#ifdef DEBUG
printk(KERN_DEBUG "i2c-i801.o: SMBus busy (%02x). Resetting... \n",
dev_dbg(&I801_dev->dev, "SMBus busy (%02x). Resetting... \n",
temp);
#endif
outb_p(temp, SMBHSTSTS);
if ((temp = (0x1f & inb_p(SMBHSTSTS))) != 0x00) {
#ifdef DEBUG
printk(KERN_DEBUG "i2c-i801.o: Failed! (%02x)\n", temp);
#endif
dev_dbg(&I801_dev->dev, "Failed! (%02x)\n", temp);
return -1;
} else {
#ifdef DEBUG
printk(KERN_DEBUG "i2c-i801.o: Successfull!\n");
#endif
dev_dbg(&I801_dev->dev, "Successfull!\n");
}
}
......@@ -251,50 +238,38 @@ int i801_transaction(void)
/* If the SMBus is still busy, we give up */
if (timeout >= MAX_TIMEOUT) {
#ifdef DEBUG
printk(KERN_DEBUG "i2c-i801.o: SMBus Timeout!\n");
dev_dbg(&I801_dev->dev, "SMBus Timeout!\n");
result = -1;
#endif
}
if (temp & 0x10) {
result = -1;
#ifdef DEBUG
printk(KERN_DEBUG "i2c-i801.o: Error: Failed bus transaction\n");
#endif
dev_dbg(&I801_dev->dev, "Error: Failed bus transaction\n");
}
if (temp & 0x08) {
result = -1;
printk
(KERN_ERR "i2c-i801.o: Bus collision! SMBus may be locked until next hard\n"
"reset. (sorry!)\n");
dev_err(&I801_dev->dev, "Bus collision! SMBus may be locked "
"until next hard reset. (sorry!)\n");
/* Clock stops and slave is stuck in mid-transmission */
}
if (temp & 0x04) {
result = -1;
#ifdef DEBUG
printk(KERN_DEBUG "i2c-i801.o: Error: no response!\n");
#endif
dev_dbg(&I801_dev->dev, "Error: no response!\n");
}
if ((inb_p(SMBHSTSTS) & 0x1f) != 0x00)
outb_p(inb(SMBHSTSTS), SMBHSTSTS);
if ((temp = (0x1f & inb_p(SMBHSTSTS))) != 0x00) {
#ifdef DEBUG
printk
(KERN_DEBUG "i2c-i801.o: Failed reset at end of transaction (%02x)\n",
temp);
#endif
dev_dbg(&I801_dev->dev, "Failed reset at end of transaction"
"(%02x)\n", temp);
}
#ifdef DEBUG
printk
(KERN_DEBUG "i2c-i801.o: Transaction (post): CNT=%02x, CMD=%02x, ADD=%02x, "
"DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), inb_p(SMBHSTCMD),
inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1));
#endif
dev_dbg(&I801_dev->dev, "Transaction (post): CNT=%02x, CMD=%02x, "
"ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
inb_p(SMBHSTDAT1));
return result;
}
......@@ -316,7 +291,7 @@ int i801_block_transaction(union i2c_smbus_data *data, char read_write,
pci_write_config_byte(I801_dev, SMBHSTCFG,
hostc | SMBHSTCFG_I2C_EN);
} else {
printk("i2c-i801.o: "
dev_err(&I801_dev->dev,
"I2C_SMBUS_I2C_BLOCK_READ not supported!\n");
return -1;
}
......@@ -349,13 +324,10 @@ int i801_block_transaction(union i2c_smbus_data *data, char read_write,
#endif
outb_p(smbcmd | ENABLE_INT9, SMBHSTCNT);
#ifdef DEBUG
printk
(KERN_DEBUG "i2c-i801.o: Block (pre %d): CNT=%02x, CMD=%02x, ADD=%02x, "
"DAT0=%02x, BLKDAT=%02x\n", i, inb_p(SMBHSTCNT),
inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
inb_p(SMBBLKDAT));
#endif
dev_dbg(&I801_dev->dev, "Block (pre %d): CNT=%02x, CMD=%02x, "
"ADD=%02x, DAT0=%02x, BLKDAT=%02x\n", i,
inb_p(SMBHSTCNT), inb_p(SMBHSTCMD), inb_p(SMBHSTADD),
inb_p(SMBHSTDAT0), inb_p(SMBBLKDAT));
/* Make sure the SMBus host is ready to start transmitting */
temp = inb_p(SMBHSTSTS);
......@@ -369,16 +341,12 @@ int i801_block_transaction(union i2c_smbus_data *data, char read_write,
errmask=0x1e;
}
if (temp & errmask) {
#ifdef DEBUG
printk
(KERN_DEBUG "i2c-i801.o: SMBus busy (%02x). Resetting... \n",
temp);
#endif
dev_dbg(&I801_dev->dev, "SMBus busy (%02x). "
"Resetting... \n", temp);
outb_p(temp, SMBHSTSTS);
if (((temp = inb_p(SMBHSTSTS)) & errmask) != 0x00) {
printk
(KERN_ERR "i2c-i801.o: Reset failed! (%02x)\n",
temp);
dev_err(&I801_dev->dev,
"Reset failed! (%02x)\n", temp);
result = -1;
goto END;
}
......@@ -410,25 +378,19 @@ int i801_block_transaction(union i2c_smbus_data *data, char read_write,
/* If the SMBus is still busy, we give up */
if (timeout >= MAX_TIMEOUT) {
result = -1;
#ifdef DEBUG
printk(KERN_DEBUG "i2c-i801.o: SMBus Timeout!\n");
#endif
dev_dbg(&I801_dev->dev, "SMBus Timeout!\n");
}
if (temp & 0x10) {
result = -1;
#ifdef DEBUG
printk
(KERN_DEBUG "i2c-i801.o: Error: Failed bus transaction\n");
#endif
dev_dbg(&I801_dev->dev,
"Error: Failed bus transaction\n");
} else if (temp & 0x08) {
result = -1;
printk(KERN_ERR "i2c-i801.o: Bus collision!\n");
dev_err(&I801_dev->dev, "Bus collision!\n");
} else if (temp & 0x04) {
result = -1;
#ifdef DEBUG
printk(KERN_DEBUG "i2c-i801.o: Error: no response!\n");
#endif
dev_dbg(&I801_dev->dev, "Error: no response!\n");
}
if (i == 1 && read_write == I2C_SMBUS_READ) {
......@@ -448,18 +410,15 @@ int i801_block_transaction(union i2c_smbus_data *data, char read_write,
if ((temp & 0x9e) != 0x00)
outb_p(temp, SMBHSTSTS); /* signals SMBBLKDAT ready */
#ifdef DEBUG
if ((temp = (0x1e & inb_p(SMBHSTSTS))) != 0x00) {
printk
(KERN_DEBUG "i2c-i801.o: Bad status (%02x) at end of transaction\n",
dev_dbg(&I801_dev->dev,
"Bad status (%02x) at end of transaction\n",
temp);
}
printk
(KERN_DEBUG "i2c-i801.o: Block (post %d): CNT=%02x, CMD=%02x, ADD=%02x, "
"DAT0=%02x, BLKDAT=%02x\n", i, inb_p(SMBHSTCNT),
inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
inb_p(SMBBLKDAT));
#endif
dev_dbg(&I801_dev->dev, "Block (post %d): CNT=%02x, CMD=%02x, "
"ADD=%02x, DAT0=%02x, BLKDAT=%02x\n", i,
inb_p(SMBHSTCNT), inb_p(SMBHSTCMD), inb_p(SMBHSTADD),
inb_p(SMBHSTDAT0), inb_p(SMBBLKDAT));
if (result < 0)
goto END;
......@@ -476,7 +435,7 @@ int i801_block_transaction(union i2c_smbus_data *data, char read_write,
&& (timeout++ < MAX_TIMEOUT));
if (timeout >= MAX_TIMEOUT) {
printk(KERN_DEBUG "i2c-i801.o: PEC Timeout!\n");
dev_dbg(&I801_dev->dev, "PEC Timeout!\n");
}
#if 0 /* now using HW PEC */
if(read_write == I2C_SMBUS_READ) {
......@@ -554,7 +513,7 @@ s32 i801_access(struct i2c_adapter * adap, u16 addr, unsigned short flags,
break;
case I2C_SMBUS_PROC_CALL:
default:
printk(KERN_ERR "i2c-i801.o: Unsupported transaction %d\n", size);
dev_err(&I801_dev->dev, "Unsupported transaction %d\n", size);
return -1;
}
......@@ -667,8 +626,8 @@ static int __devinit i801_probe(struct pci_dev *dev, const struct pci_device_id
{
if (i801_setup(dev)) {
printk
(KERN_WARNING "i2c-i801.o: I801 not detected, module not inserted.\n");
dev_warn(&dev->dev,
"I801 not detected, module not inserted.\n");
return -ENODEV;
}
......@@ -694,7 +653,7 @@ static struct pci_driver i801_driver = {
static int __init i2c_i801_init(void)
{
printk(KERN_INFO "i2c-i801.o version %s (%s)\n", I2C_VERSION, I2C_DATE);
printk(KERN_INFO "i2c-i801 version %s (%s)\n", I2C_VERSION, I2C_DATE);
return pci_module_init(&i801_driver);
}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7