v2.5.0.3 -> v2.5.0.4

- Jens Axboe: fix up bio highmem breakage, more cleanups
- Greg KH: USB update

Documentation/DocBook/Makefile

@@ -110,6 +110,7 @@ APISOURCES :=	$(TOPDIR)/drivers/media/video/videodev.c \
 		$(TOPDIR)/fs/locks.c \
 		$(TOPDIR)/fs/bio.c \
 		$(TOPDIR)/include/asm-i386/bitops.h \
+		$(TOPDIR)/include/linux/usb.h \
 		$(TOPDIR)/kernel/pm.c \
 		$(TOPDIR)/kernel/ksyms.c \
 		$(TOPDIR)/kernel/kmod.c \

Documentation/DocBook/kernel-api.tmpl

@@ -204,8 +204,83 @@
   </chapter>
 
   <chapter id="usb">
-     <title>USB Devices</title>
+    <title>USB Devices</title>
+
+    <para>Drivers for USB devices talk to the "usbcore" APIs, and are
+    exposed through driver frameworks such as block, character,
+    or network devices.
+    There are two types of public "usbcore" APIs:  those intended for
+    general driver use, and those which are only public to drivers that
+    are part of the core.
+    The drivers that are part of the core are involved in managing a USB bus.
+    They include the "hub" driver, which manages trees of USB devices, and
+    several different kinds of "host controller" driver (HCD), which control
+    individual busses.
+    </para>
+
+    <para>The device model seen by USB drivers is relatively complex.
+    </para>
+     
+    <itemizedlist>
+
+	<listitem><para>USB supports four kinds of data transfer
+	(control, bulk, interrupt, and isochronous).  Two transfer
+	types use bandwidth as it's available (control and bulk),
+	while the other two types of transfer (interrupt and isochronous)
+	are scheduled to provide guaranteed bandwidth.
+	</para></listitem>
+
+	<listitem><para>The device description model includes one or more
+	"configurations" per device, only one of which is active at a time.
+	</para></listitem>
+
+	<listitem><para>Configurations have one or more "interface", each
+	of which may have "alternate settings".  Interfaces may be
+	standardized by USB "Class" specifications, or may be specific to
+	a vendor or device.</para>
+
+	<para>USB device drivers actually bind to interfaces, not devices.
+	Think of them as "interface drivers", though you
+	may not see many devices where the distinction is important.
+	Most USB devices are simple, with only one configuration,
+	one interface, and one alternate setting.
+	</para></listitem>
+
+	<listitem><para>Interfaces have one or more "endpoints", each of
+	which supports one type and direction of data transfer such as
+	"bulk out" or "interrupt in".  The entire configuration may have
+	up to sixteen endpoints in each direction, allocated as needed
+	among all the interfaces.
+	</para></listitem>
+
+	<listitem><para>Data transfer on USB is packetized; each endpoint
+	has a maximum packet size.
+	Drivers must often be aware of conventions such as flagging the end
+	of bulk transfers using "short" (including zero length) packets.
+	</para></listitem>
+
+	<listitem><para>The Linux USB API supports synchronous calls for
+	control and bulk messaging.
+	It also supports asynchnous calls for all kinds of data transfer,
+	using request structures called "URBs" (USB Request Blocks).
+	</para></listitem>
+
+    </itemizedlist>
+
+    <para>Accordingly, the USB Core API exposed to device drivers
+    covers quite a lot of territory.  You'll probably need to consult
+    the USB 2.0 specification, available online from www.usb.org at
+    no cost, as well as class or device specifications.
+    </para>
+
+    <sect1><title>Data Types and Macros</title>
+!Iinclude/linux/usb.h
+    </sect1>
+
+    <sect1><title>USB Core APIs</title>
 !Edrivers/usb/usb.c
+    </sect1>
+
   </chapter>
 
   <chapter id="uart16x50">

Documentation/sonypi.txt

@@ -58,6 +58,10 @@ where:
 			get enabled unless you set this parameter to 1.
 			Do not use this option unless it's actually necessary,
 			some Vaio models don't deal well with this option.
+			This option is available only if the kernel is 
+			compiled without ACPI support (since it conflicts
+			with it and it shouldn't be required anyway if 
+			ACPI is already enabled).
 
 	verbose:	print unknown events from the sonypi device
 
@@ -93,7 +97,10 @@ Bugs:
 	- some users reported that the laptop speed is lower (dhrystone
 	  tested) when using the driver with the fnkeyinit parameter. I cannot
 	  reproduce it on my laptop and not all users have this problem.
-	  Still under investigation.
+	  This happens because the fnkeyinit parameter enables the ACPI 
+	  mode (but without additionnal ACPI control, like processor 
+	  speed handling etc). Use ACPI instead of APM if it works on your
+	  laptop.
 	
 	- since all development was done by reverse engineering, there is
 	  _absolutely no guarantee_ that this driver will not crash your

Makefile

 VERSION = 2
 PATCHLEVEL = 5
 SUBLEVEL = 1
-EXTRAVERSION =-pre3
+EXTRAVERSION =-pre4
 
 KERNELRELEASE=$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
 

drivers/block/elevator.c

@@ -98,7 +98,7 @@ inline int elv_rq_merge_ok(request_queue_t *q, struct request *rq,
 {
 	if (bio_data_dir(bio) == rq->cmd) {
 		if (rq->rq_dev == bio->bi_dev && !rq->waiting
-		    && !rq->special && rq->inactive && rq->q == q)
+		    && !rq->special && rq->inactive)
 			return 1;
 	}
 

drivers/block/floppy.c

@@ -2437,16 +2437,15 @@ static int buffer_chain_size(void)
 	char *base;
 
 	base = CURRENT->buffer;
-	size = CURRENT->current_nr_sectors << 9;
-	bio = CURRENT->bio;
+	size = 0;
 
-	if (bio){
-		bio = bio->bi_next;
-		while (bio && bio_data(bio) == base + size){
-			size += bio_size(bio);
-			bio = bio->bi_next;
-		}
+	rq_for_each_bio(bio, CURRENT) {
+		if (bio_data(bio) != base + size)
+			break;
+
+		size += bio->bi_size;
 	}
+
 	return size >> 9;
 }
 
@@ -2543,7 +2542,7 @@ static void copy_buffer(int ssize, int max_sector, int max_sector_2)
 			break;
 		}
 #endif
-		size = bio_size(bio);
+		size = bio->bi_size;;
 		buffer = bio_data(bio);
 	}
 #ifdef FLOPPY_SANITY_CHECK

drivers/block/ll_rw_blk.c

@@ -303,10 +303,7 @@ int blk_rq_map_sg(request_queue_t *q, struct request *rq, struct scatterlist *sg
 
 			BIO_BUG_ON(i > bio->bi_vcnt);
 
-			if (!cluster)
-				goto new_segment;
-
-			if (bvec_to_phys(bvec) == lastend) {
+			if (cluster && bvec_to_phys(bvec) == lastend) {
 				if (sg[nsegs - 1].length + nbytes > q->max_segment_size)
 					goto new_segment;
 
@@ -1135,7 +1132,7 @@ int submit_bio(int rw, struct bio *bio)
 	BUG_ON(!bio->bi_end_io);
 
 	BIO_BUG_ON(bio_offset(bio) > PAGE_SIZE);
-	BIO_BUG_ON(!bio_size(bio));
+	BIO_BUG_ON(!bio->bi_size);
 	BIO_BUG_ON(!bio->bi_io_vec);
 
 	bio->bi_rw = rw;
@@ -1172,11 +1169,7 @@ int submit_bh(int rw, struct buffer_head * bh)
 	bio = bio_alloc(GFP_NOIO, 1);
 
 	bio->bi_sector = bh->b_blocknr * (bh->b_size >> 9);
-	bio->bi_next = NULL;
 	bio->bi_dev = bh->b_dev;
-	bio->bi_private = bh;
-	bio->bi_end_io = end_bio_bh_io_sync;
-
 	bio->bi_io_vec[0].bv_page = bh->b_page;
 	bio->bi_io_vec[0].bv_len = bh->b_size;
 	bio->bi_io_vec[0].bv_offset = bh_offset(bh);
@@ -1185,6 +1178,9 @@ int submit_bh(int rw, struct buffer_head * bh)
 	bio->bi_idx = 0;
 	bio->bi_size = bh->b_size;
 
+	bio->bi_end_io = end_bio_bh_io_sync;
+	bio->bi_private = bh;
+
 	return submit_bio(rw, bio);
 }
 

drivers/block/loop.c

@@ -182,7 +182,7 @@ static int lo_send(struct loop_device *lo, struct bio *bio, int bsize, loff_t po
 	down(&mapping->host->i_sem);
 	index = pos >> PAGE_CACHE_SHIFT;
 	offset = pos & (PAGE_CACHE_SIZE - 1);
-	len = bio_size(bio);
+	len = bio->bi_size;
 	data = bio_data(bio);
 	while (len > 0) {
 		int IV = index * (PAGE_CACHE_SIZE/bsize) + offset/bsize;
@@ -272,7 +272,7 @@ static int lo_receive(struct loop_device *lo, struct bio *bio, int bsize, loff_t
 	cookie.data = bio_data(bio);
 	cookie.bsize = bsize;
 	desc.written = 0;
-	desc.count = bio_size(bio);
+	desc.count = bio->bi_size;
 	desc.buf = (char*)&cookie;
 	desc.error = 0;
 	spin_lock_irq(&lo->lo_lock);
@@ -470,7 +470,7 @@ static int loop_make_request(request_queue_t *q, struct bio *rbh)
 	IV = loop_get_iv(lo, rbh->bi_sector);
 	if (rw == WRITE) {
 		if (lo_do_transfer(lo, WRITE, bio_data(bh), bio_data(rbh),
-				   bio_size(bh), IV))
+				   bh->bi_size, IV))
 			goto err;
 	}
 
@@ -504,7 +504,7 @@ static inline void loop_handle_bio(struct loop_device *lo, struct bio *bio)
 		unsigned long IV = loop_get_iv(lo, rbh->bi_sector);
 
 		ret = lo_do_transfer(lo, READ, bio_data(bio), bio_data(rbh),
-				     bio_size(bio), IV);
+				     bio->bi_size, IV);
 
 		bio_endio(rbh, !ret, bio_sectors(bio));
 		loop_put_buffer(bio);

drivers/block/nbd.c

@@ -168,7 +168,7 @@ void nbd_send_req(struct socket *sock, struct request *req)
 		struct bio *bio = req->bio;
 		DEBUG("data, ");
 		do {
-			result = nbd_xmit(1, sock, bio_data(bio), bio_size(bio), bio->bi_next == NULL ? 0 : MSG_MORE);
+			result = nbd_xmit(1, sock, bio_data(bio), bio->bi_size, bio->bi_next == NULL ? 0 : MSG_MORE);
 			if (result <= 0)
 				FAIL("Send data failed.");
 			bio = bio->bi_next;
@@ -208,7 +208,7 @@ struct request *nbd_read_stat(struct nbd_device *lo)
 		struct bio *bio = req->bio;
 		DEBUG("data, ");
 		do {
-			result = nbd_xmit(0, lo->sock, bio_data(bio), bio_size(bio), MSG_WAITALL);
+			result = nbd_xmit(0, lo->sock, bio_data(bio), bio->bi_size, MSG_WAITALL);
 			if (result <= 0)
 				HARDFAIL("Recv data failed.");
 			bio = bio->bi_next;

drivers/block/rd.c

@@ -409,13 +409,13 @@ static int initrd_release(struct inode *inode,struct file *file)
 {
 	extern void free_initrd_mem(unsigned long, unsigned long);
 
-	spin_lock( &initrd_users_lock );
+	spin_lock(&initrd_users_lock);
 	if (!--initrd_users) {
-		spin_unlock( &initrd_users_lock );
+		spin_unlock(&initrd_users_lock);
 		free_initrd_mem(initrd_start, initrd_end);
 		initrd_start = 0;
 	} else {
-		spin_unlock( &initrd_users_lock );
+		spin_unlock(&initrd_users_lock);
 	}
 		
 	blkdev_put(inode->i_bdev, BDEV_FILE);
@@ -437,9 +437,9 @@ static int rd_open(struct inode * inode, struct file * filp)
 
 #ifdef CONFIG_BLK_DEV_INITRD
 	if (unit == INITRD_MINOR) {
+		if (!initrd_start) return -ENODEV;
 		spin_lock( &initrd_users_lock );
 		initrd_users++;
-		if (!initrd_start) return -ENODEV;
 		spin_unlock( &initrd_users_lock );
 		filp->f_op = &initrd_fops;
 		return 0;

drivers/char/pc110pad.c

@@ -68,8 +68,8 @@ static struct pc110pad_params current_params;
 /* driver/filesystem interface management */
 static wait_queue_head_t queue;
 static struct fasync_struct *asyncptr;
-static active_count = 0; 	/* number of concurrent open()s */
-static spinlock_t active_lock = SPIN_LOCK_UNLOCKED;
+static int active_count = 0; 	/* number of concurrent open()s */
+static spinlock_t pc110_lock = SPIN_LOCK_UNLOCKED;
 /* this lock should be held when referencing active_count */
 static struct semaphore reader_lock;
 
@@ -482,15 +482,14 @@ static void sample_debug(int d[3])
 	int thisd, thisdd, thisx, thisy;
 	int b;
 	unsigned long flags;
-	
-	save_flags(flags);
-	cli();
+
+	spin_lock_irqsave(&pc110_lock, flags);	
 	read_raw_pad(&thisd, &thisdd, &thisx, &thisy);
 	d[0]=(thisd?0x80:0) | (thisdd?0x40:0) | bounce;
 	d[1]=(recent_transition?0x80:0)+transition_count;
 	read_button(&b);
 	d[2]=(synthesize_tap<<4) | (b?0x01:0);
-	restore_flags(flags);
+	spin_unlock_irqrestore(&pc110_lock, flags);
 }
 
 /**
@@ -586,11 +585,12 @@ static int fasync_pad(int fd, struct file *filp, int on)
  
 static int close_pad(struct inode * inode, struct file * file)
 {
+	unsigned long flags;
 	fasync_pad(-1, file, 0);
-	spin_lock( &active_lock );
+	spin_lock_irqsave(&pc110_lock, flags);
 	if (!--active_count)
 		outb(0x30, current_params.io+2);  /* switch off digitiser */
-	spin_unlock( &active_lock );	
+	spin_unlock_irqrestore(&active_lock, flags);	
 	return 0;
 }
 
@@ -610,16 +610,13 @@ static int open_pad(struct inode * inode, struct file * file)
 {
 	unsigned long flags;
 	
-	spin_lock( &active_lock );
+       	spin_lock_irqsave(&pc110_lock, flags);
 	if (active_count++)
         {
-		spin_unlock( &active_lock );
+        	spin_unlock_irqrestore(&pc110_lock, flags);
 		return 0;
 	}
-	spin_unlock( &active_lock );
 
-	save_flags(flags);
-	cli();
 	outb(0x30, current_params.io+2);	/* switch off digitiser */
 	pad_irq(0,0,0);		/* read to flush any pending bytes */
 	pad_irq(0,0,0);		/* read to flush any pending bytes */
@@ -634,7 +631,7 @@ static int open_pad(struct inode * inode, struct file * file)
 	synthesize_tap=0;
 	del_timer(&bounce_timer);
 	del_timer(&tap_timer);
-	restore_flags(flags);
+       spin_unlock_irqrestore(&pc110_lock, flags);
 
 	return 0;
 }

drivers/char/pc_keyb.c

@@ -406,7 +406,7 @@ int pckbd_pm_resume(struct pm_dev *dev, pm_request_t rqst, void *data)
 
        if (rqst == PM_RESUME) {
                if (queue) {                    /* Aux port detected */
-		       spin_lock_irqsave( &aux_count_lock, flags);
+		       spin_lock_irqsave(&aux_count_lock, flags);
               	       if ( aux_count == 0) {   /* Mouse not in use */ 
                                spin_lock(&kbd_controller_lock);
 			       /*
@@ -420,9 +420,9 @@ int pckbd_pm_resume(struct pm_dev *dev, pm_request_t rqst, void *data)
 			       kbd_write_command(KBD_CCMD_WRITE_MODE);
 			       kb_wait();
 			       kbd_write_output(AUX_INTS_OFF);
-			       spin_unlock(&kbd_controller_lock, flags);
+			       spin_unlock(&kbd_controller_lock);
 		       }
-		       spin_unlock_irqrestore( &aux_count_lock,flags );
+		       spin_unlock_irqrestore(&aux_count_lock, flags);
 	       }
        }
 #endif
@@ -433,7 +433,7 @@ int pckbd_pm_resume(struct pm_dev *dev, pm_request_t rqst, void *data)
 static inline void handle_mouse_event(unsigned char scancode)
 {
 #ifdef CONFIG_PSMOUSE
-	int flags;
+	unsigned long flags;
 	static unsigned char prev_code;
 	if (mouse_reply_expected) {
 		if (scancode == AUX_ACK) {
@@ -452,7 +452,7 @@ static inline void handle_mouse_event(unsigned char scancode)
 
 	prev_code = scancode;
 	add_mouse_randomness(scancode);
-	spin_lock_irqsave( &aux_count_lock, flags);
+	spin_lock_irqsave(&aux_count_lock, flags);
 	if ( aux_count ) {
 		int head = queue->head;
 
@@ -464,7 +464,7 @@ static inline void handle_mouse_event(unsigned char scancode)
 			wake_up_interruptible(&queue->proc_list);
 		}
 	}
-	spin_unlock_irqrestore( &aux_count_lock, flags);
+	spin_unlock_irqrestore(&aux_count_lock, flags);
 #endif
 }
 
@@ -1052,14 +1052,14 @@ static int fasync_aux(int fd, struct file *filp, int on)
 
 static int release_aux(struct inode * inode, struct file * file)
 {
-	int flags;
+	unsigned long flags;
 	fasync_aux(-1, file, 0);
-	spin_lock_irqsave( &aux_count, flags );
+	spin_lock_irqsave(&aux_count_lock, flags);
 	if ( --aux_count ) {
-		spin_unlock_irqrestore( &aux_count_lock );
+		spin_unlock_irqrestore(&aux_count_lock, flags);
 		return 0;
 	}
-	spin_unlock_irqrestore( &aux_count_lock, flags );
+	spin_unlock_irqrestore(&aux_count_lock, flags);
 	kbd_write_cmd(AUX_INTS_OFF);			    /* Disable controller ints */
 	kbd_write_command_w(KBD_CCMD_MOUSE_DISABLE);
 	aux_free_irq(AUX_DEV);
@@ -1073,16 +1073,16 @@ static int release_aux(struct inode * inode, struct file * file)
 
 static int open_aux(struct inode * inode, struct file * file)
 {
-	int flags;
-	spin_lock_irqsave( &aux_count_lock, flags );
+	unsigned long flags;
+	spin_lock_irqsave(&aux_count_lock, flags);
 	if ( aux_count++ ) {
-		spin_unlock_irqrestore( &aux_count_lock );
+		spin_unlock_irqrestore(&aux_count_lock, flags);
 		return 0;
 	}
 	queue->head = queue->tail = 0;		/* Flush input queue */
 	if (aux_request_irq(keyboard_interrupt, AUX_DEV)) {
 		aux_count--;
-		spin_unlock_irqrestore( &aux_count_lock, flags );
+		spin_unlock_irqrestore(&aux_count_lock, flags);
 		return -EBUSY;
 	}
 	kbd_write_command_w(KBD_CCMD_MOUSE_ENABLE);	/* Enable the
@@ -1094,7 +1094,7 @@ static int open_aux(struct inode * inode, struct file * file)
 	mdelay(2);			/* Ensure we follow the kbc access delay rules.. */
 
 	send_data(KBD_CMD_ENABLE);	/* try to workaround toshiba4030cdt problem */
-	spin_unlock_irqrestore( &aux_count_lock, flags );
+	spin_unlock_irqrestore(&aux_count_lock, flags);
 	return 0;
 }
 

drivers/char/sonypi.c

@@ -617,8 +617,11 @@ static int __devinit sonypi_probe(struct pci_dev *pcidev) {
 		goto out3;
 	}
 
+#if !defined(CONFIG_ACPI)
+	/* Enable ACPI mode to get Fn key events */
 	if (fnkeyinit)
 		outb(0xf0, 0xb2);
+#endif
 
 	if (sonypi_device.model == SONYPI_DEVICE_MODEL_TYPE2)
 		sonypi_type2_srs();
@@ -666,6 +669,11 @@ static void __devexit sonypi_remove(void) {
 		sonypi_type2_dis();
 	else
 		sonypi_type1_dis();
+#if !defined(CONFIG_ACPI)
+	/* disable ACPI mode */
+	if (fnkeyinit)
+		outb(0xf1, 0xb2);
+#endif
 	free_irq(sonypi_device.irq, sonypi_irq);
 	release_region(sonypi_device.ioport1, sonypi_device.region_size);
 	misc_deregister(&sonypi_misc_device);

drivers/char/sonypi.h

@@ -35,7 +35,7 @@
 #ifdef __KERNEL__
 
 #define SONYPI_DRIVER_MAJORVERSION	1
-#define SONYPI_DRIVER_MINORVERSION	7
+#define SONYPI_DRIVER_MINORVERSION	8
 
 #include <linux/types.h>
 #include <linux/pci.h>

drivers/char/wdt.c

@@ -50,7 +50,7 @@
 #include <linux/reboot.h>
 #include <linux/init.h>
 
-static int wdt_is_open;
+static unsigned long wdt_is_open;
 
 /*
  *	You must set these - there is no sane way to probe for this board.
@@ -337,13 +337,12 @@ static int wdt_open(struct inode *inode, struct file *file)
 	switch(MINOR(inode->i_rdev))
 	{
 		case WATCHDOG_MINOR:
-			if(wdt_is_open)
+			if(test_and_set_bit(0, &wdt_is_open))
 				return -EBUSY;
 			/*
 			 *	Activate 
 			 */
 	 
-			wdt_is_open=1;
 			inb_p(WDT_DC);		/* Disable */
 			wdt_ctr_mode(0,3);
 			wdt_ctr_mode(1,2);
@@ -380,7 +379,7 @@ static int wdt_release(struct inode *inode, struct file *file)
 		inb_p(WDT_DC);		/* Disable counters */
 		wdt_ctr_load(2,0);	/* 0 length reset pulses now */
 #endif		
-		wdt_is_open=0;
+		clear_bit(0, &wdt_is_open);
 	}
 	return 0;
 }

drivers/char/wdt_pci.c

@@ -71,7 +71,7 @@
 #define PCI_DEVICE_ID_WDG_CSM 0x22c0
 #endif
 
-static int wdt_is_open;
+static unsigned long wdt_is_open;
 
 /*
  *	You must set these - there is no sane way to probe for this board.

drivers/md/lvm.c

@@ -1246,8 +1246,6 @@ static int lvm_map(struct bio *bh)
  	}
 
  out:
-	if (test_bit(BIO_HASHED, &bh->bi_flags))
-		BUG();
 	bh->bi_dev = rdev_map;
 	bh->bi_sector = rsector_map;
 	up_read(&lv->lv_lock);

drivers/message/i2o/i2o_block.c

@@ -287,8 +287,8 @@ static int i2ob_send(u32 m, struct i2ob_device *dev, struct i2ob_request *ireq,
 		while(bio)
 		{
 			if (bio_to_phys(bio) == last) {
-				size += bio_size(bio);
-				last += bio_size(bio);
+				size += bio->bi_size;
+				last += bio->bi_size;
 				if(bio->bi_next)
 					__raw_writel(0x14000000|(size), mptr-8);
 				else
@@ -297,16 +297,16 @@ static int i2ob_send(u32 m, struct i2ob_device *dev, struct i2ob_request *ireq,
 			else
 			{
 				if(bio->bi_next)
-					__raw_writel(0x10000000|bio_size(bio), mptr);
+					__raw_writel(0x10000000|bio->bi_size, mptr);
 				else
-					__raw_writel(0xD0000000|bio_size(bio), mptr);
+					__raw_writel(0xD0000000|bio->bi_size, mptr);
 				__raw_writel(bio_to_phys(bio), mptr+4);
 				mptr += 8;	
-				size = bio_size(bio);
-				last = bio_to_phys(bio) + bio_size(bio);
+				size = bio->bi_size;
+				last = bio_to_phys(bio) + bio->bi_size;
 			}
 
-			count -= bio_size(bio);
+			count -= bio->bi_size;
 			bio = bio->bi_next;
 		}
 		/*
@@ -326,8 +326,8 @@ static int i2ob_send(u32 m, struct i2ob_device *dev, struct i2ob_request *ireq,
 		while(bio)
 		{
 			if (bio_to_phys(bio) == last) {
-				size += bio_size(bio);
-				last += bio_size(bio);
+				size += bio->bi_size;
+				last += bio->bi_size;
 				if(bio->bi_next)
 					__raw_writel(0x14000000|(size), mptr-8);
 				else
@@ -336,16 +336,16 @@ static int i2ob_send(u32 m, struct i2ob_device *dev, struct i2ob_request *ireq,
 			else
 			{
 				if(bio->bi_next)
-					__raw_writel(0x14000000|bio_size(bio), mptr);
+					__raw_writel(0x14000000|bio->bi_size, mptr);
 				else
-					__raw_writel(0xD4000000|bio_size(bio), mptr);
+					__raw_writel(0xD4000000|bio->bi_size, mptr);
 				__raw_writel(bio_to_phys(bio), mptr+4);
 				mptr += 8;	
-				size = bio_size(bio);
-				last = bio_to_phys(bio) + bio_size(bio);
+				size = bio->bi_size;
+				last = bio_to_phys(bio) + bio->bi_size;
 			}
 
-			count -= bio_size(bio);
+			count -= bio->bi_size;
 			bio = bio->bi_next;
 		}
 

drivers/scsi/aha152x.h

@@ -49,7 +49,7 @@ int aha152x_proc_info(char *buffer, char **start, off_t offset, int length, int
                   cmd_per_lun:			1,			\
                   present:			0,			\
                   unchecked_isa_dma:		0,			\
-                  use_clustering:		DISABLE_CLUSTERING,	\
+                  use_clustering:		DISABLE_CLUSTERING }
 #endif
 
 

drivers/scsi/gdth.h

@@ -1059,7 +1059,7 @@ int gdth_eh_host_reset(Scsi_Cmnd *scp);
                cmd_per_lun:     GDTH_MAXC_P_L,                   \
                present:         0,                               \
                unchecked_isa_dma: 1,                             \
-               use_clustering:  ENABLE_CLUSTERING,               \
+               use_clustering:  ENABLE_CLUSTERING }
 
 #elif LINUX_VERSION_CODE >= 0x02015F
 int gdth_bios_param(Disk *,kdev_t,int *);
@@ -1090,7 +1090,7 @@ int gdth_eh_host_reset(Scsi_Cmnd *scp);
                cmd_per_lun:     GDTH_MAXC_P_L,                   \
                present:         0,                               \
                unchecked_isa_dma: 1,                             \
-               use_clustering:  ENABLE_CLUSTERING,               \
+               use_clustering:  ENABLE_CLUSTERING }
 
 #elif LINUX_VERSION_CODE >= 0x010300
 int gdth_bios_param(Disk *,kdev_t,int *);

drivers/scsi/mac_esp.h

@@ -34,7 +34,7 @@ extern int esp_reset(Scsi_Cmnd *, unsigned int);
 			    this_id:		7, \
 			    sg_tablesize:	SG_ALL, \
 			    cmd_per_lun:	1, \
-			    use_clustering:	DISABLE_CLUSTERING, \
+			    use_clustering:	DISABLE_CLUSTERING }
 
 #endif /* MAC_ESP_H */
 

drivers/scsi/scsi_merge.c

@@ -148,7 +148,7 @@ __inline static int __count_segments(struct request *req,
 	 */
 	bio = req->bio;
 #ifdef DMA_SEGMENT_SIZE_LIMITED
-	if (reqsize + bio_size(bio) > PAGE_SIZE)
+	if (reqsize + bio->bi_size > PAGE_SIZE)
 		ret++;
 #endif
 
@@ -156,7 +156,7 @@ __inline static int __count_segments(struct request *req,
 		bio_for_each_segment(bvec, bio, i)
 			ret++;
 
-		reqsize += bio_size(bio);
+		reqsize += bio->bi_size;
 	}
 
 	if (remainder)
@@ -201,7 +201,7 @@ recount_segments(Scsi_Cmnd * SCpnt)
 }
 
 #define MERGEABLE_BUFFERS(X,Y) \
-(((((long)bio_to_phys((X))+bio_size((X)))|((long)bio_to_phys((Y)))) & \
+(((((long)bio_to_phys((X))+(X)->bi_size)|((long)bio_to_phys((Y)))) & \
   (DMA_CHUNK_SIZE - 1)) == 0)
 
 #ifdef DMA_CHUNK_SIZE
@@ -767,7 +767,7 @@ __inline static int __init_io(Scsi_Cmnd * SCpnt,
 		 * back and allocate a really small one - enough to satisfy
 		 * the first buffer.
 		 */
-		if (bio_to_phys(bio) + bio_size(bio) - 1 > ISA_DMA_THRESHOLD) {
+		if (bio_to_phys(bio) + bio->bi_size - 1 > ISA_DMA_THRESHOLD) {
 			buff = (char *) scsi_malloc(this_count << 9);
 			if (!buff) {
 				printk("Warning - running low on DMA memory\n");

drivers/scsi/sim710.h

@@ -37,7 +37,7 @@ int sim710_release(struct Scsi_Host *);
 		      this_id:			7, 			\
 		      sg_tablesize:		128,		 	\
 		      cmd_per_lun:		1,		 	\
-		      use_clustering:		DISABLE_CLUSTERING,	\
+		      use_clustering:		DISABLE_CLUSTERING }
 
 #ifndef HOSTS_C
 

drivers/usb/dabusb.c

@@ -224,7 +224,7 @@ static int dabusb_alloc_buffers (pdabusb_t s)
 			err("kmalloc(sizeof(buff_t))==NULL");
 			goto err;
 		}
-		memset (b, sizeof (buff_t), 0);
+		memset (b, 0, sizeof (buff_t));
 		b->s = s;
 		b->purb = usb_alloc_urb(packets);
 		if (!b->purb) {

drivers/usb/serial/belkin_sa.c

 /*
  * Belkin USB Serial Adapter Driver
  *
- *  Copyright (C) 2000
- *      William Greathouse (wgreathouse@smva.com)
+ *  Copyright (C) 2000		William Greathouse (wgreathouse@smva.com)
+ *  Copyright (C) 2000-2001 	Greg Kroah-Hartman (greg@kroah.com)
  *
  *  This program is largely derived from work by the linux-usb group
  *  and associated source files.  Please see the usb/serial files for
@@ -24,6 +24,9 @@
  * -- Add support for flush commands
  * -- Add everything that is missing :)
  *
+ * 27-Nov-2001 gkh
+ * 	compressed all the differnent device entries into 1.
+ *
  * 30-May-2001 gkh
  *	switched from using spinlock to a semaphore, which fixes lots of problems.
  *
@@ -88,7 +91,7 @@
 /*
  * Version Information
  */
-#define DRIVER_VERSION "v1.1"
+#define DRIVER_VERSION "v1.2"
 #define DRIVER_AUTHOR "William Greathouse <wgreathouse@smva.com>"
 #define DRIVER_DESC "USB Belkin Serial converter driver"
 
@@ -112,125 +115,12 @@ static __devinitdata struct usb_device_id id_table_combined [] = {
 	{ }							/* Terminating entry */
 };
 
-static __devinitdata struct usb_device_id belkin_dockstation_table [] = {
-	{ USB_DEVICE(BELKIN_DOCKSTATION_VID, BELKIN_DOCKSTATION_PID) },
-	{ }							/* Terminating entry */
-};
-
-static __devinitdata struct usb_device_id belkin_sa_table [] = {
-	{ USB_DEVICE(BELKIN_SA_VID, BELKIN_SA_PID) },
-	{ }							/* Terminating entry */
-};
-
-static __devinitdata struct usb_device_id belkin_old_table [] = {
-	{ USB_DEVICE(BELKIN_OLD_VID, BELKIN_OLD_PID) },
-	{ }							/* Terminating entry */
-};
-
-static __devinitdata struct usb_device_id peracom_table [] = {
-	{ USB_DEVICE(PERACOM_VID, PERACOM_PID) },
-	{ }							/* Terminating entry */
-};
-
-static __devinitdata struct usb_device_id gocom232_table [] = {
-	{ USB_DEVICE(GOHUBS_VID, GOHUBS_PID) },
-	{ }							/* Terminating entry */
-};
-
 MODULE_DEVICE_TABLE (usb, id_table_combined);
 
-/* All of the device info needed for the Belkin dockstation serial converter */
-static struct usb_serial_device_type belkin_dockstation_device = {
-	name:			"Belkin F5U120-PC USB Serial Adapter",
-	id_table:		belkin_dockstation_table,		/* the Belkin F5U103 device */
-	needs_interrupt_in:	MUST_HAVE,			/* this device must have an interrupt in endpoint */
-	needs_bulk_in:		MUST_HAVE,			/* this device must have a bulk in endpoint */
-	needs_bulk_out:		MUST_HAVE,			/* this device must have a bulk out endpoint */
-	num_interrupt_in:	1,
-	num_bulk_in:		1,
-	num_bulk_out:		1,
-	num_ports:		1,
-	open:			belkin_sa_open,
-	close:			belkin_sa_close,
-	read_int_callback:	belkin_sa_read_int_callback,	/* How we get the status info */
-	ioctl:			belkin_sa_ioctl,
-	set_termios:		belkin_sa_set_termios,
-	break_ctl:		belkin_sa_break_ctl,
-	startup:		belkin_sa_startup,
-	shutdown:		belkin_sa_shutdown,
-};
-
-/* All of the device info needed for the Belkin serial converter */
-static struct usb_serial_device_type belkin_sa_device = {
-	name:			"Belkin F5U103 USB Serial Adapter",
-	id_table:		belkin_sa_table,		/* the Belkin F5U103 device */
-	needs_interrupt_in:	MUST_HAVE,			/* this device must have an interrupt in endpoint */
-	needs_bulk_in:		MUST_HAVE,			/* this device must have a bulk in endpoint */
-	needs_bulk_out:		MUST_HAVE,			/* this device must have a bulk out endpoint */
-	num_interrupt_in:	1,
-	num_bulk_in:		1,
-	num_bulk_out:		1,
-	num_ports:		1,
-	open:			belkin_sa_open,
-	close:			belkin_sa_close,
-	read_int_callback:	belkin_sa_read_int_callback,	/* How we get the status info */
-	ioctl:			belkin_sa_ioctl,
-	set_termios:		belkin_sa_set_termios,
-	break_ctl:		belkin_sa_break_ctl,
-	startup:		belkin_sa_startup,
-	shutdown:		belkin_sa_shutdown,
-};
-
-
-/* This driver also supports the "old" school Belkin single port adaptor */
-static struct usb_serial_device_type belkin_old_device = {
-	name:			"Belkin USB Serial Adapter",
-	id_table:		belkin_old_table,		/* the old Belkin device */
-	needs_interrupt_in:	MUST_HAVE,			/* this device must have an interrupt in endpoint */
-	needs_bulk_in:		MUST_HAVE,			/* this device must have a bulk in endpoint */
-	needs_bulk_out:		MUST_HAVE,			/* this device must have a bulk out endpoint */
-	num_interrupt_in:	1,
-	num_bulk_in:		1,
-	num_bulk_out:		1,
-	num_ports:		1,
-	open:			belkin_sa_open,
-	close:			belkin_sa_close,
-	read_int_callback:	belkin_sa_read_int_callback,	/* How we get the status info */
-	ioctl:			belkin_sa_ioctl,
-	set_termios:		belkin_sa_set_termios,
-	break_ctl:		belkin_sa_break_ctl,
-	startup:		belkin_sa_startup,
-	shutdown:		belkin_sa_shutdown,
-};
-
-/* this driver also works for the Peracom single port adapter */
-static struct usb_serial_device_type peracom_device = {
-	name:			"Peracom single port USB Serial Adapter",
-	id_table:		peracom_table,			/* the Peracom device */
-	needs_interrupt_in:	MUST_HAVE,			/* this device must have an interrupt in endpoint */
-	needs_bulk_in:		MUST_HAVE,			/* this device must have a bulk in endpoint */
-	needs_bulk_out:		MUST_HAVE,			/* this device must have a bulk out endpoint */
-	num_interrupt_in:	1,
-	num_bulk_in:		1,
-	num_bulk_out:		1,
-	num_ports:		1,
-	open:			belkin_sa_open,
-	close:			belkin_sa_close,
-	read_int_callback:	belkin_sa_read_int_callback,	/* How we get the status info */
-	ioctl:			belkin_sa_ioctl,
-	set_termios:		belkin_sa_set_termios,
-	break_ctl:		belkin_sa_break_ctl,
-	startup:		belkin_sa_startup,
-	shutdown:		belkin_sa_shutdown,
-};
-
-/* the GoHubs Go-COM232 device is the same as the Peracom single port adapter */
-static struct usb_serial_device_type gocom232_device = {
-	name:			"GO-COM232 USB Serial Converter",
-	id_table:		gocom232_table,			/* the GO-COM232 device */
-	needs_interrupt_in:	MUST_HAVE,			/* this device must have an interrupt in endpoint */
-	needs_bulk_in:		MUST_HAVE,			/* this device must have a bulk in endpoint */
-	needs_bulk_out:		MUST_HAVE,			/* this device must have a bulk out endpoint */
+/* All of the device info needed for the serial converters */
+static struct usb_serial_device_type belkin_device = {
+	name:			"Belkin / Peracom / GoHubs USB Serial Adapter",
+	id_table:		id_table_combined,
 	num_interrupt_in:	1,
 	num_bulk_in:		1,
 	num_bulk_out:		1,
@@ -642,11 +532,7 @@ static int belkin_sa_ioctl (struct usb_serial_port *port, struct file * file, un
 
 static int __init belkin_sa_init (void)
 {
-	usb_serial_register (&belkin_dockstation_device);
-	usb_serial_register (&belkin_sa_device);
-	usb_serial_register (&belkin_old_device);
-	usb_serial_register (&peracom_device);
-	usb_serial_register (&gocom232_device);
+	usb_serial_register (&belkin_device);
 	info(DRIVER_DESC " " DRIVER_VERSION);
 	return 0;
 }
@@ -654,11 +540,7 @@ static int __init belkin_sa_init (void)
 
 static void __exit belkin_sa_exit (void)
 {
-	usb_serial_deregister (&belkin_dockstation_device);
-	usb_serial_deregister (&belkin_sa_device);
-	usb_serial_deregister (&belkin_old_device);
-	usb_serial_deregister (&peracom_device);
-	usb_serial_deregister (&gocom232_device);
+	usb_serial_deregister (&belkin_device);
 }
 
 

drivers/usb/serial/cyberjack.c

@@ -79,9 +79,6 @@ MODULE_DEVICE_TABLE (usb, id_table);
 static struct usb_serial_device_type cyberjack_device = {
 	name:			"Reiner SCT Cyberjack USB card reader",
 	id_table:		id_table,
-	needs_interrupt_in:	MUST_HAVE,
-	needs_bulk_in:		MUST_HAVE,
-	needs_bulk_out:		MUST_HAVE,
 	num_interrupt_in:	1,
 	num_bulk_in:		1,
 	num_bulk_out:		1,

drivers/usb/serial/digi_acceleport.c

@@ -500,9 +500,6 @@ MODULE_DEVICE_TABLE (usb, id_table_combined);
 static struct usb_serial_device_type digi_acceleport_2_device = {
 	name:				"Digi USB",
 	id_table:			id_table_2,
-	needs_interrupt_in:		DONT_CARE,
-	needs_bulk_in:			MUST_HAVE,
-	needs_bulk_out:			MUST_HAVE,
 	num_interrupt_in:		0,
 	num_bulk_in:			4,
 	num_bulk_out:			4,
@@ -526,9 +523,6 @@ static struct usb_serial_device_type digi_acceleport_2_device = {
 static struct usb_serial_device_type digi_acceleport_4_device = {
 	name:				"Digi USB",
 	id_table:			id_table_4,
-	needs_interrupt_in:		DONT_CARE,
-	needs_bulk_in:			MUST_HAVE,
-	needs_bulk_out:			MUST_HAVE,
 	num_interrupt_in:		0,
 	num_bulk_in:			5,
 	num_bulk_out:			5,

drivers/usb/serial/empeg.c

@@ -116,9 +116,6 @@ MODULE_DEVICE_TABLE (usb, id_table);
 static struct usb_serial_device_type empeg_device = {
 	name:			"Empeg",
 	id_table:		id_table,
-	needs_interrupt_in:	MUST_HAVE_NOT,	/* must not have an interrupt in endpoint */
-	needs_bulk_in:		MUST_HAVE,	/* must have a bulk in endpoint */
-	needs_bulk_out:		MUST_HAVE,	/* must have a bulk out endpoint */
 	num_interrupt_in:	0,
 	num_bulk_in:		1,
 	num_bulk_out:		1,

drivers/usb/serial/ftdi_sio.c

@@ -176,9 +176,6 @@ static void ftdi_sio_break_ctl		(struct usb_serial_port *port, int break_state )
 static struct usb_serial_device_type ftdi_sio_device = {
 	name:			"FTDI SIO",
 	id_table:		id_table_sio,
-	needs_interrupt_in:	MUST_HAVE_NOT,
-	needs_bulk_in:		MUST_HAVE,
-	needs_bulk_out:		MUST_HAVE,
 	num_interrupt_in:	0,
 	num_bulk_in:		1,
 	num_bulk_out:		1,
@@ -199,9 +196,6 @@ static struct usb_serial_device_type ftdi_sio_device = {
 static struct usb_serial_device_type ftdi_8U232AM_device = {
 	name:			"FTDI 8U232AM",
 	id_table:		id_table_8U232AM,
-	needs_interrupt_in:	DONT_CARE,
-	needs_bulk_in:		MUST_HAVE,
-	needs_bulk_out:		MUST_HAVE,
 	num_interrupt_in:	0,
 	num_bulk_in:		1,
 	num_bulk_out:		1,

drivers/usb/serial/io_tables.h

@@ -74,9 +74,6 @@ MODULE_DEVICE_TABLE (usb, id_table_combined);
 static struct usb_serial_device_type edgeport_1port_device = {
 	name:			"Edgeport 1 port adapter",
 	id_table:		edgeport_1port_id_table,
-	needs_interrupt_in:	MUST_HAVE,
-	needs_bulk_in:		MUST_HAVE,
-	needs_bulk_out:		MUST_HAVE,
 	num_interrupt_in:	1,
 	num_bulk_in:		1,
 	num_bulk_out:		1,
@@ -98,9 +95,6 @@ static struct usb_serial_device_type edgeport_1port_device = {
 static struct usb_serial_device_type edgeport_2port_device = {
 	name:			"Edgeport 2 port adapter",
 	id_table:		edgeport_2port_id_table,
-	needs_interrupt_in:	MUST_HAVE,
-	needs_bulk_in:		MUST_HAVE,
-	needs_bulk_out:		MUST_HAVE,
 	num_interrupt_in:	1,
 	num_bulk_in:		1,
 	num_bulk_out:		1,
@@ -122,9 +116,6 @@ static struct usb_serial_device_type edgeport_2port_device = {
 static struct usb_serial_device_type edgeport_4port_device = {
 	name:			"Edgeport 4 port adapter",
 	id_table:		edgeport_4port_id_table,
-	needs_interrupt_in:	MUST_HAVE,
-	needs_bulk_in:		MUST_HAVE,
-	needs_bulk_out:		MUST_HAVE,
 	num_interrupt_in:	1,
 	num_bulk_in:		1,
 	num_bulk_out:		1,
@@ -146,9 +137,6 @@ static struct usb_serial_device_type edgeport_4port_device = {
 static struct usb_serial_device_type edgeport_8port_device = {
 	name:			"Edgeport 8 port adapter",
 	id_table:		edgeport_8port_id_table,
-	needs_interrupt_in:	MUST_HAVE,
-	needs_bulk_in:		MUST_HAVE,
-	needs_bulk_out:		MUST_HAVE,
 	num_interrupt_in:	1,
 	num_bulk_in:		1,
 	num_bulk_out:		1,

drivers/usb/serial/ir-usb.c

@@ -93,9 +93,6 @@ MODULE_DEVICE_TABLE (usb, id_table);
 struct usb_serial_device_type ir_device = {
 	name:			"IR Dongle",
 	id_table:		id_table,
-	needs_interrupt_in:	MUST_HAVE,
-	needs_bulk_in:		MUST_HAVE,
-	needs_bulk_out:		MUST_HAVE,
 	num_interrupt_in:	1,
 	num_bulk_in:		1,
 	num_bulk_out:		1,

drivers/usb/serial/keyspan.h

@@ -451,9 +451,6 @@ static __devinitdata struct usb_device_id keyspan_usa49w_ids[] = {
 static struct usb_serial_device_type keyspan_usa18x_pre_device = {
 	name:			"Keyspan USA18X - (without firmware)",
 	id_table:		keyspan_usa18x_pre_ids,
-	needs_interrupt_in:	DONT_CARE,
-	needs_bulk_in:		DONT_CARE,
-	needs_bulk_out:		DONT_CARE,
 	num_interrupt_in:	NUM_DONT_CARE,
 	num_bulk_in:		NUM_DONT_CARE,
 	num_bulk_out:		NUM_DONT_CARE,
@@ -464,9 +461,6 @@ static struct usb_serial_device_type keyspan_usa18x_pre_device = {
 static struct usb_serial_device_type keyspan_usa19_pre_device = {
 	name:			"Keyspan USA19 - (without firmware)",
 	id_table:		keyspan_usa19_pre_ids,
-	needs_interrupt_in:	DONT_CARE,
-	needs_bulk_in:		DONT_CARE,
-	needs_bulk_out:		DONT_CARE,
 	num_interrupt_in:	NUM_DONT_CARE,
 	num_bulk_in:		NUM_DONT_CARE,
 	num_bulk_out:		NUM_DONT_CARE,
@@ -478,9 +472,6 @@ static struct usb_serial_device_type keyspan_usa19_pre_device = {
 static struct usb_serial_device_type keyspan_usa19w_pre_device = {
 	name:			"Keyspan USA19W - (without firmware)",
 	id_table:		keyspan_usa19w_pre_ids,
-	needs_interrupt_in:	DONT_CARE,
-	needs_bulk_in:		DONT_CARE,
-	needs_bulk_out:		DONT_CARE,
 	num_interrupt_in:	NUM_DONT_CARE,
 	num_bulk_in:		NUM_DONT_CARE,
 	num_bulk_out:		NUM_DONT_CARE,
@@ -492,9 +483,6 @@ static struct usb_serial_device_type keyspan_usa19w_pre_device = {
 static struct usb_serial_device_type keyspan_usa28_pre_device = {
 	name:			"Keyspan USA28 - (without firmware)",
 	id_table:		keyspan_usa28_pre_ids,
-	needs_interrupt_in:	DONT_CARE,
-	needs_bulk_in:		DONT_CARE,
-	needs_bulk_out:		DONT_CARE,
 	num_interrupt_in:	NUM_DONT_CARE,
 	num_bulk_in:		NUM_DONT_CARE,
 	num_bulk_out:		NUM_DONT_CARE,
@@ -505,9 +493,6 @@ static struct usb_serial_device_type keyspan_usa28_pre_device = {
 static struct usb_serial_device_type keyspan_usa28x_pre_device = {
 	name:			"Keyspan USA28X - (without firmware)",
 	id_table:		keyspan_usa28x_pre_ids,
-	needs_interrupt_in:	DONT_CARE,
-	needs_bulk_in:		DONT_CARE,
-	needs_bulk_out:		DONT_CARE,
 	num_interrupt_in:	NUM_DONT_CARE,
 	num_bulk_in:		NUM_DONT_CARE,
 	num_bulk_out:		NUM_DONT_CARE,
@@ -518,9 +503,6 @@ static struct usb_serial_device_type keyspan_usa28x_pre_device = {
 static struct usb_serial_device_type keyspan_usa28xa_pre_device = {
 	name:			"Keyspan USA28XA - (without firmware)",
 	id_table:		keyspan_usa28xa_pre_ids,
-	needs_interrupt_in:	DONT_CARE,
-	needs_bulk_in:		DONT_CARE,
-	needs_bulk_out:		DONT_CARE,
 	num_interrupt_in:	NUM_DONT_CARE,
 	num_bulk_in:		NUM_DONT_CARE,
 	num_bulk_out:		NUM_DONT_CARE,
@@ -531,9 +513,6 @@ static struct usb_serial_device_type keyspan_usa28xa_pre_device = {
 static struct usb_serial_device_type keyspan_usa28xb_pre_device = {
 	name:			"Keyspan USA28XB - (without firmware)",
 	id_table:		keyspan_usa28xb_pre_ids,
-	needs_interrupt_in:	DONT_CARE,
-	needs_bulk_in:		DONT_CARE,
-	needs_bulk_out:		DONT_CARE,
 	num_interrupt_in:	NUM_DONT_CARE,
 	num_bulk_in:		NUM_DONT_CARE,
 	num_bulk_out:		NUM_DONT_CARE,
@@ -544,9 +523,6 @@ static struct usb_serial_device_type keyspan_usa28xb_pre_device = {
 static struct usb_serial_device_type keyspan_usa49w_pre_device = {
 	name:			"Keyspan USA49W - (without firmware)",
 	id_table:		keyspan_usa49w_pre_ids,
-	needs_interrupt_in:	DONT_CARE,
-	needs_bulk_in:		DONT_CARE,
-	needs_bulk_out:		DONT_CARE,
 	num_interrupt_in:	NUM_DONT_CARE,
 	num_bulk_in:		NUM_DONT_CARE,
 	num_bulk_out:		NUM_DONT_CARE,
@@ -557,9 +533,6 @@ static struct usb_serial_device_type keyspan_usa49w_pre_device = {
 static struct usb_serial_device_type keyspan_usa18x_device = {
 	name:			"Keyspan USA18X",
 	id_table:		keyspan_usa18x_ids,
-	needs_interrupt_in:	DONT_CARE,	
-	needs_bulk_in:		MUST_HAVE,
-	needs_bulk_out:		MUST_HAVE,
 	num_interrupt_in:	NUM_DONT_CARE,
 	num_bulk_in:		3,
 	num_bulk_out:		4,
@@ -583,9 +556,6 @@ static struct usb_serial_device_type keyspan_usa18x_device = {
 static struct usb_serial_device_type keyspan_usa19_device = {
 	name:			"Keyspan USA19",
 	id_table:		keyspan_usa19_ids,
-	needs_interrupt_in:	DONT_CARE,	
-	needs_bulk_in:		MUST_HAVE,
-	needs_bulk_out:		MUST_HAVE,
 	num_interrupt_in:	NUM_DONT_CARE,
 	num_bulk_in:		3,
 	num_bulk_out:		4,
@@ -610,9 +580,6 @@ static struct usb_serial_device_type keyspan_usa19_device = {
 static struct usb_serial_device_type keyspan_usa19w_device = {
 	name:			"Keyspan USA19W",
 	id_table:		keyspan_usa19w_ids,
-	needs_interrupt_in:	DONT_CARE,	
-	needs_bulk_in:		MUST_HAVE,
-	needs_bulk_out:		MUST_HAVE,
 	num_interrupt_in:	NUM_DONT_CARE,
 	num_bulk_in:		3,
 	num_bulk_out:		4,
@@ -637,9 +604,6 @@ static struct usb_serial_device_type keyspan_usa19w_device = {
 static struct usb_serial_device_type keyspan_usa28_device = {
 	name:			"Keyspan USA28",
 	id_table:		keyspan_usa28_ids,
-	needs_interrupt_in:	DONT_CARE,	
-	needs_bulk_in:		DONT_CARE,
-	needs_bulk_out:		DONT_CARE,
 	num_interrupt_in:	NUM_DONT_CARE,
 	num_bulk_in:		NUM_DONT_CARE,
 	num_bulk_out:		NUM_DONT_CARE,
@@ -655,9 +619,6 @@ static struct usb_serial_device_type keyspan_usa28_device = {
 static struct usb_serial_device_type keyspan_usa28x_device = {
 	name:			"Keyspan USA28X/XB",
 	id_table:		keyspan_usa28x_ids,
-	needs_interrupt_in:	DONT_CARE,	
-	needs_bulk_in:		DONT_CARE,
-	needs_bulk_out:		DONT_CARE,
 	num_interrupt_in:	NUM_DONT_CARE,
 	num_bulk_in:		NUM_DONT_CARE,
 	num_bulk_out:		NUM_DONT_CARE,
@@ -682,9 +643,6 @@ static struct usb_serial_device_type keyspan_usa28x_device = {
 static struct usb_serial_device_type keyspan_usa28xa_device = {
 	name:			"Keyspan USA28XA",
 	id_table:		keyspan_usa28xa_ids,
-	needs_interrupt_in:	DONT_CARE,	
-	needs_bulk_in:		DONT_CARE,
-	needs_bulk_out:		DONT_CARE,
 	num_interrupt_in:	NUM_DONT_CARE,
 	num_bulk_in:		NUM_DONT_CARE,
 	num_bulk_out:		NUM_DONT_CARE,
@@ -709,9 +667,6 @@ static struct usb_serial_device_type keyspan_usa28xa_device = {
 static struct usb_serial_device_type keyspan_usa49w_device = {
 	name:			"Keyspan USA49W",
 	id_table:		keyspan_usa49w_ids,
-	needs_interrupt_in:	DONT_CARE,	
-	needs_bulk_in:		MUST_HAVE,
-	needs_bulk_out:		MUST_HAVE,
 	num_interrupt_in:	NUM_DONT_CARE,
 	num_bulk_in:		5,
 	num_bulk_out:		5,

drivers/usb/serial/keyspan_pda.c

@@ -172,10 +172,6 @@ static __devinitdata struct usb_device_id id_table_fake [] = {
 #ifdef XIRCOM
 static __devinitdata struct usb_device_id id_table_fake_xircom [] = {
         { USB_DEVICE(XIRCOM_VENDOR_ID, XIRCOM_FAKE_ID) },
-        { }                                             
-};
-
-static __devinitdata struct usb_device_id id_table_fake_entregra [] = {
         { USB_DEVICE(ENTREGRA_VENDOR_ID, ENTREGRA_FAKE_ID) },
         { }                                             
 };
@@ -843,9 +839,6 @@ static void keyspan_pda_shutdown (struct usb_serial *serial)
 static struct usb_serial_device_type keyspan_pda_fake_device = {
 	name:			"Keyspan PDA - (prerenumeration)",
 	id_table:		id_table_fake,
-	needs_interrupt_in:	DONT_CARE,
-	needs_bulk_in:		DONT_CARE,
-	needs_bulk_out:		DONT_CARE,
 	num_interrupt_in:	NUM_DONT_CARE,
 	num_bulk_in:		NUM_DONT_CARE,
 	num_bulk_out:		NUM_DONT_CARE,
@@ -856,24 +849,8 @@ static struct usb_serial_device_type keyspan_pda_fake_device = {
 
 #ifdef XIRCOM
 static struct usb_serial_device_type xircom_pgs_fake_device = {
-        name:                   "Xircom PGS - (prerenumeration)",
+        name:                   "Xircom / Entregra PGS - (prerenumeration)",
         id_table:               id_table_fake_xircom,
-        needs_interrupt_in:     DONT_CARE,
-        needs_bulk_in:          DONT_CARE,
-        needs_bulk_out:         DONT_CARE,
-        num_interrupt_in:       NUM_DONT_CARE,
-        num_bulk_in:            NUM_DONT_CARE,
-        num_bulk_out:           NUM_DONT_CARE,
-        num_ports:              1,
-        startup:                keyspan_pda_fake_startup,
-};
-
-static struct usb_serial_device_type entregra_pgs_fake_device = {
-        name:                   "Entregra PGS - (prerenumeration)",
-        id_table:               id_table_fake_entregra,
-        needs_interrupt_in:     DONT_CARE,
-        needs_bulk_in:          DONT_CARE,
-        needs_bulk_out:         DONT_CARE,
         num_interrupt_in:       NUM_DONT_CARE,
         num_bulk_in:            NUM_DONT_CARE,
         num_bulk_out:           NUM_DONT_CARE,
@@ -885,9 +862,6 @@ static struct usb_serial_device_type entregra_pgs_fake_device = {
 static struct usb_serial_device_type keyspan_pda_device = {
 	name:			"Keyspan PDA",
 	id_table:		id_table_std,
-	needs_interrupt_in:	MUST_HAVE,
-	needs_bulk_in:		DONT_CARE,
-	needs_bulk_out:		MUST_HAVE,
 	num_interrupt_in:	1,
 	num_bulk_in:		0,
 	num_bulk_out:		1,
@@ -917,7 +891,6 @@ static int __init keyspan_pda_init (void)
 #endif
 #ifdef XIRCOM
 	usb_serial_register (&xircom_pgs_fake_device);
-	usb_serial_register (&entregra_pgs_fake_device);
 #endif
 	info(DRIVER_DESC " " DRIVER_VERSION);
 	return 0;
@@ -931,7 +904,6 @@ static void __exit keyspan_pda_exit (void)
 	usb_serial_deregister (&keyspan_pda_fake_device);
 #endif
 #ifdef XIRCOM
-	usb_serial_deregister (&entregra_pgs_fake_device);
 	usb_serial_deregister (&xircom_pgs_fake_device);
 #endif
 }

drivers/usb/serial/mct_u232.c

@@ -136,54 +136,12 @@ static __devinitdata struct usb_device_id id_table_combined [] = {
 	{ }		/* Terminating entry */
 };
 
-static __devinitdata struct usb_device_id mct_u232_table [] = {
-        { USB_DEVICE(MCT_U232_VID, MCT_U232_PID) },
-        { }                        /* Terminating entry */
-};
-
-static __devinitdata struct usb_device_id mct_u232_sitecom_table [] = {
-        { USB_DEVICE(MCT_U232_VID, MCT_U232_SITECOM_PID) },
-        { }                        /* Terminating entry */
-};
-
-static __devinitdata struct usb_device_id mct_u232_du_h3sp_table [] = {
-        { USB_DEVICE(MCT_U232_VID, MCT_U232_DU_H3SP_PID) },
-        { }                        /* Terminating entry */
-};
-
 MODULE_DEVICE_TABLE (usb, id_table_combined);
 
 
 static struct usb_serial_device_type mct_u232_device = {
 	name:		     "Magic Control Technology USB-RS232",
-	id_table:	     mct_u232_table,
-	needs_interrupt_in:  MUST_HAVE,	 /* 2 interrupt-in endpoints */
-	needs_bulk_in:	     MUST_HAVE_NOT,   /* no bulk-in endpoint */
-	needs_bulk_out:	     MUST_HAVE,	      /* 1 bulk-out endpoint */
-	num_interrupt_in:    2,
-	num_bulk_in:	     0,
-	num_bulk_out:	     1,
-	num_ports:	     1,
-	open:		     mct_u232_open,
-	close:		     mct_u232_close,
-#ifdef FIX_WRITE_RETURN_CODE_PROBLEM
-	write:		     mct_u232_write,
-	write_bulk_callback: mct_u232_write_bulk_callback,
-#endif
-	read_int_callback:   mct_u232_read_int_callback,
-	ioctl:		     mct_u232_ioctl,
-	set_termios:	     mct_u232_set_termios,
-	break_ctl:	     mct_u232_break_ctl,
-	startup:	     mct_u232_startup,
-	shutdown:	     mct_u232_shutdown,
-};
-
-static struct usb_serial_device_type mct_u232_sitecom_device = {
-	name:		     "MCT/Sitecom USB-RS232",
-	id_table:	     mct_u232_sitecom_table,
-	needs_interrupt_in:  MUST_HAVE,	 /* 2 interrupt-in endpoints */
-	needs_bulk_in:	     MUST_HAVE_NOT,   /* no bulk-in endpoint */
-	needs_bulk_out:	     MUST_HAVE,	      /* 1 bulk-out endpoint */
+	id_table:	     id_table_combined,
 	num_interrupt_in:    2,
 	num_bulk_in:	     0,
 	num_bulk_out:	     1,
@@ -202,32 +160,6 @@ static struct usb_serial_device_type mct_u232_sitecom_device = {
 	shutdown:	     mct_u232_shutdown,
 };
 
-static struct usb_serial_device_type mct_u232_du_h3sp_device = {
-        name:                "MCT/D-Link DU-H3SP USB BAY",
-        id_table:            mct_u232_du_h3sp_table,
-        needs_interrupt_in:  MUST_HAVE,  /* 2 interrupt-in endpoints */
-        needs_bulk_in:       MUST_HAVE_NOT,   /* no bulk-in endpoint */
-        needs_bulk_out:      MUST_HAVE,       /* 1 bulk-out endpoint */
-        num_interrupt_in:    2,
-        num_bulk_in:         0,
-        num_bulk_out:        1,
-        num_ports:           1,
-        open:                mct_u232_open,
-        close:               mct_u232_close,
-#ifdef FIX_WRITE_RETURN_CODE_PROBLEM
-        write:               mct_u232_write,
-        write_bulk_callback: mct_u232_write_bulk_callback,
-#endif
-        read_int_callback:   mct_u232_read_int_callback,
-        ioctl:               mct_u232_ioctl,
-        set_termios:         mct_u232_set_termios,
-        break_ctl:           mct_u232_break_ctl,
-        startup:             mct_u232_startup,
-        shutdown:            mct_u232_shutdown,
-};
-
-
-
 
 struct mct_u232_private {
 	unsigned long	     control_state; /* Modem Line Setting (TIOCM) */
@@ -880,9 +812,7 @@ static int mct_u232_ioctl (struct usb_serial_port *port, struct file * file,
 static int __init mct_u232_init (void)
 {
 	usb_serial_register (&mct_u232_device);
-	usb_serial_register (&mct_u232_sitecom_device);
-	usb_serial_register (&mct_u232_du_h3sp_device);
-	info(DRIVER_VERSION ":" DRIVER_DESC);
+	info(DRIVER_DESC " " DRIVER_VERSION);
 	return 0;
 }
 
@@ -890,8 +820,6 @@ static int __init mct_u232_init (void)
 static void __exit mct_u232_exit (void)
 {
 	usb_serial_deregister (&mct_u232_device);
-	usb_serial_deregister (&mct_u232_sitecom_device);
-	usb_serial_deregister (&mct_u232_du_h3sp_device);
 }
 
 

drivers/usb/serial/omninet.c

@@ -90,9 +90,6 @@ MODULE_DEVICE_TABLE (usb, id_table);
 static struct usb_serial_device_type zyxel_omninet_device = {
 	name:			"ZyXEL - omni.net lcd plus usb",
 	id_table:		id_table,
-	needs_interrupt_in:	MUST_HAVE,
-	needs_bulk_in:		MUST_HAVE,
-	needs_bulk_out:		MUST_HAVE,
 	num_interrupt_in:	1,
 	num_bulk_in:		1,
 	num_bulk_out:		2,

drivers/usb/serial/pl2303.c

@@ -118,9 +118,6 @@ static void pl2303_shutdown (struct usb_serial *serial);
 static struct usb_serial_device_type pl2303_device = {
 	name:			"PL-2303",
 	id_table:		id_table,
-	needs_interrupt_in:	DONT_CARE,		/* this device must have an interrupt in endpoint */
-	needs_bulk_in:		MUST_HAVE,		/* this device must have a bulk in endpoint */
-	needs_bulk_out:		MUST_HAVE,		/* this device must have a bulk out endpoint */
 	num_interrupt_in:	NUM_DONT_CARE,
 	num_bulk_in:		1,
 	num_bulk_out:		1,

drivers/usb/serial/usb-serial.h

@@ -108,13 +108,6 @@ struct usb_serial {
 };
 
 
-#define MUST_HAVE_NOT	0x01
-#define MUST_HAVE	0x02
-#define DONT_CARE	0x03
-
-#define	HAS		0x02
-#define HAS_NOT		0x01
-
 #define NUM_DONT_CARE	(-1)
 
 
@@ -122,9 +115,6 @@ struct usb_serial {
 struct usb_serial_device_type {
 	char	*name;
 	const struct usb_device_id *id_table;
-	char	needs_interrupt_in;
-	char	needs_bulk_in;
-	char	needs_bulk_out;
 	char	num_interrupt_in;
 	char	num_bulk_in;
 	char	num_bulk_out;

drivers/usb/serial/usbserial.c

@@ -339,9 +339,6 @@ static struct usb_device_id generic_device_ids[2]; /* Initially all zeroes. */
 static struct usb_serial_device_type generic_device = {
 	name:			"Generic",
 	id_table:		generic_device_ids,
-	needs_interrupt_in:	DONT_CARE,		/* don't have to have an interrupt in endpoint */
-	needs_bulk_in:		DONT_CARE,		/* don't have to have a bulk in endpoint */
-	needs_bulk_out:		DONT_CARE,		/* don't have to have a bulk out endpoint */
 	num_interrupt_in:	NUM_DONT_CARE,
 	num_bulk_in:		NUM_DONT_CARE,
 	num_bulk_out:		NUM_DONT_CARE,
@@ -1068,9 +1065,6 @@ static void * usb_serial_probe(struct usb_device *dev, unsigned int ifnum,
 	int minor;
 	int buffer_size;
 	int i;
-	char interrupt_pipe;
-	char bulk_in_pipe;
-	char bulk_out_pipe;
 	int num_interrupt_in = 0;
 	int num_bulk_in = 0;
 	int num_bulk_out = 0;
@@ -1097,10 +1091,8 @@ static void * usb_serial_probe(struct usb_device *dev, unsigned int ifnum,
 		dbg("none matched");
 		return(NULL);
 	}
-	
+
 	/* descriptor matches, let's find the endpoints needed */
-	interrupt_pipe = bulk_in_pipe = bulk_out_pipe = HAS_NOT;
-			
 	/* check out the endpoints */
 	iface_desc = &interface->altsetting[0];
 	for (i = 0; i < iface_desc->bNumEndpoints; ++i) {
@@ -1110,7 +1102,6 @@ static void * usb_serial_probe(struct usb_device *dev, unsigned int ifnum,
 		    ((endpoint->bmAttributes & 3) == 0x02)) {
 			/* we found a bulk in endpoint */
 			dbg("found bulk in");
-			bulk_in_pipe = HAS;
 			bulk_in_endpoint[num_bulk_in] = endpoint;
 			++num_bulk_in;
 		}
@@ -1119,7 +1110,6 @@ static void * usb_serial_probe(struct usb_device *dev, unsigned int ifnum,
 		    ((endpoint->bmAttributes & 3) == 0x02)) {
 			/* we found a bulk out endpoint */
 			dbg("found bulk out");
-			bulk_out_pipe = HAS;
 			bulk_out_endpoint[num_bulk_out] = endpoint;
 			++num_bulk_out;
 		}
@@ -1128,7 +1118,6 @@ static void * usb_serial_probe(struct usb_device *dev, unsigned int ifnum,
 		    ((endpoint->bmAttributes & 3) == 0x03)) {
 			/* we found a interrupt in endpoint */
 			dbg("found interrupt in");
-			interrupt_pipe = HAS;
 			interrupt_in_endpoint[num_interrupt_in] = endpoint;
 			++num_interrupt_in;
 		}
@@ -1151,7 +1140,6 @@ static void * usb_serial_probe(struct usb_device *dev, unsigned int ifnum,
 				    ((endpoint->bmAttributes & 3) == 0x03)) {
 					/* we found a interrupt in endpoint */
 					dbg("found interrupt in for Prolific device on separate interface");
-					interrupt_pipe = HAS;
 					interrupt_in_endpoint[num_interrupt_in] = endpoint;
 					++num_interrupt_in;
 				}
@@ -1161,15 +1149,6 @@ static void * usb_serial_probe(struct usb_device *dev, unsigned int ifnum,
 	/* END HORRIBLE HACK FOR PL2303 */
 #endif
 	
-	/* verify that we found all of the endpoints that we need */
-	if (!((interrupt_pipe & type->needs_interrupt_in) &&
-	      (bulk_in_pipe & type->needs_bulk_in) &&
-	      (bulk_out_pipe & type->needs_bulk_out))) {
-		/* nope, they don't match what we expected */
-		info("descriptors matched, but endpoints did not");
-		return NULL;
-	}
-
 	/* found all that we need */
 	info("%s converter detected", type->name);
 

drivers/usb/serial/visor.c

@@ -127,7 +127,7 @@
 /*
  * Version Information
  */
-#define DRIVER_VERSION "v1.5"
+#define DRIVER_VERSION "v1.6"
 #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>"
 #define DRIVER_DESC "USB HandSpring Visor, Palm m50x, Sony Cli driver"
 
@@ -147,15 +147,12 @@ static void visor_write_bulk_callback	(struct urb *urb);
 static void visor_read_bulk_callback	(struct urb *urb);
 
 
-static __devinitdata struct usb_device_id visor_id_table [] = {
-	{ USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_VISOR_ID) },
-	{ }					/* Terminating entry */
-};
-
-static __devinitdata struct usb_device_id palm_4_0_id_table [] = {
+static __devinitdata struct usb_device_id combined_id_table [] = {
 	{ USB_DEVICE(PALM_VENDOR_ID, PALM_M500_ID) },
 	{ USB_DEVICE(PALM_VENDOR_ID, PALM_M505_ID) },
 	{ USB_DEVICE(PALM_VENDOR_ID, PALM_M125_ID) },
+	{ USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_VISOR_ID) },
+	{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_4_0_ID) },
 	{ }					/* Terminating entry */
 };
 
@@ -164,11 +161,6 @@ static __devinitdata struct usb_device_id clie_id_3_5_table [] = {
 	{ }					/* Terminating entry */
 };
 
-static __devinitdata struct usb_device_id clie_id_4_0_table [] = {
-	{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_4_0_ID) },
-	{ }					/* Terminating entry */
-};
-
 static __devinitdata struct usb_device_id id_table [] = {
 	{ USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_VISOR_ID) },
 	{ USB_DEVICE(PALM_VENDOR_ID, PALM_M500_ID) },
@@ -183,39 +175,10 @@ MODULE_DEVICE_TABLE (usb, id_table);
 
 
 
-/* All of the device info needed for the Handspring Visor */
+/* All of the device info needed for the Handspring Visor, and Palm 4.0 devices */
 static struct usb_serial_device_type handspring_device = {
-	name:			"Handspring Visor",
-	id_table:		visor_id_table,
-	needs_interrupt_in:	MUST_HAVE_NOT,		/* this device must not have an interrupt in endpoint */
-	needs_bulk_in:		MUST_HAVE,		/* this device must have a bulk in endpoint */
-	needs_bulk_out:		MUST_HAVE,		/* this device must have a bulk out endpoint */
-	num_interrupt_in:	0,
-	num_bulk_in:		2,
-	num_bulk_out:		2,
-	num_ports:		2,
-	open:			visor_open,
-	close:			visor_close,
-	throttle:		visor_throttle,
-	unthrottle:		visor_unthrottle,
-	startup:		visor_startup,
-	shutdown:		visor_shutdown,
-	ioctl:			visor_ioctl,
-	set_termios:		visor_set_termios,
-	write:			visor_write,
-	write_room:		visor_write_room,
-	chars_in_buffer:	visor_chars_in_buffer,
-	write_bulk_callback:	visor_write_bulk_callback,
-	read_bulk_callback:	visor_read_bulk_callback,
-};
-
-/* device info for the Palm 4.0 devices */
-static struct usb_serial_device_type palm_4_0_device = {
-	name:			"Palm 4.0",
-	id_table:		palm_4_0_id_table,
-	needs_interrupt_in:	MUST_HAVE_NOT,		/* this device must not have an interrupt in endpoint */
-	needs_bulk_in:		MUST_HAVE,		/* this device must have a bulk in endpoint */
-	needs_bulk_out:		MUST_HAVE,		/* this device must have a bulk out endpoint */
+	name:			"Handspring Visor / Palm 4.0 / Cli 4.0",
+	id_table:		combined_id_table,
 	num_interrupt_in:	0,
 	num_bulk_in:		2,
 	num_bulk_out:		2,
@@ -235,14 +198,10 @@ static struct usb_serial_device_type palm_4_0_device = {
 	read_bulk_callback:	visor_read_bulk_callback,
 };
 
-
 /* device info for the Sony Clie OS version 3.5 */
 static struct usb_serial_device_type clie_3_5_device = {
 	name:			"Sony Cli 3.5",
 	id_table:		clie_id_3_5_table,
-	needs_interrupt_in:	MUST_HAVE_NOT,		/* this device must not have an interrupt in endpoint */
-	needs_bulk_in:		MUST_HAVE,		/* this device must have a bulk in endpoint */
-	needs_bulk_out:		MUST_HAVE,		/* this device must have a bulk out endpoint */
 	num_interrupt_in:	0,
 	num_bulk_in:		1,
 	num_bulk_out:		1,
@@ -260,31 +219,6 @@ static struct usb_serial_device_type clie_3_5_device = {
 	read_bulk_callback:	visor_read_bulk_callback,
 };
 
-/* device info for the Sony Clie OS version 4.0 */
-static struct usb_serial_device_type clie_4_0_device = {
-	name:			"Sony Clié 4.0",
-	id_table:		clie_id_4_0_table,
-	needs_interrupt_in:	MUST_HAVE_NOT,		/* this device must not have an interrupt in endpoint */
-	needs_bulk_in:		MUST_HAVE,		/* this device must have a bulk in endpoint */
-	needs_bulk_out:		MUST_HAVE,		/* this device must have a bulk out endpoint */
-	num_interrupt_in:	0,
-	num_bulk_in:		2,
-	num_bulk_out:		2,
-	num_ports:		2,
-	open:			visor_open,
-	close:			visor_close,
-	throttle:		visor_throttle,
-	unthrottle:		visor_unthrottle,
-	startup:		visor_startup,
-	shutdown:		visor_shutdown,
-	ioctl:			visor_ioctl,
-	set_termios:		visor_set_termios,
-	write:			visor_write,
-	write_room:		visor_write_room,
-	chars_in_buffer:	visor_chars_in_buffer,
-	write_bulk_callback:	visor_write_bulk_callback,
-	read_bulk_callback:	visor_read_bulk_callback,
-};
 
 #define NUM_URBS			24
 #define URB_TRANSFER_BUFFER_SIZE	768
@@ -801,9 +735,7 @@ static int __init visor_init (void)
 	int i;
 
 	usb_serial_register (&handspring_device);
-	usb_serial_register (&palm_4_0_device);
 	usb_serial_register (&clie_3_5_device);
-	usb_serial_register (&clie_4_0_device);
 	
 	/* create our write urb pool and transfer buffers */ 
 	spin_lock_init (&write_urb_pool_lock);
@@ -835,9 +767,7 @@ static void __exit visor_exit (void)
 	unsigned long flags;
 
 	usb_serial_deregister (&handspring_device);
-	usb_serial_deregister (&palm_4_0_device);
 	usb_serial_deregister (&clie_3_5_device);
-	usb_serial_deregister (&clie_4_0_device);
 
 	spin_lock_irqsave (&write_urb_pool_lock, flags);
 

drivers/usb/serial/whiteheat.c

@@ -88,7 +88,7 @@
 /*
  * Version Information
  */
-#define DRIVER_VERSION "v1.1"
+#define DRIVER_VERSION "v1.2"
 #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>"
 #define DRIVER_DESC "USB ConnectTech WhiteHEAT driver"
 
@@ -128,28 +128,23 @@ static int  whiteheat_ioctl		(struct usb_serial_port *port, struct file * file,
 static void whiteheat_set_termios	(struct usb_serial_port *port, struct termios * old);
 static void whiteheat_throttle		(struct usb_serial_port *port);
 static void whiteheat_unthrottle	(struct usb_serial_port *port);
-static int  whiteheat_startup		(struct usb_serial *serial);
-static void whiteheat_shutdown		(struct usb_serial *serial);
+static int  whiteheat_fake_startup	(struct usb_serial *serial);
+static int  whiteheat_real_startup	(struct usb_serial *serial);
+static void whiteheat_real_shutdown	(struct usb_serial *serial);
 
 static struct usb_serial_device_type whiteheat_fake_device = {
 	name:			"Connect Tech - WhiteHEAT - (prerenumeration)",
 	id_table:		id_table_prerenumeration,
-	needs_interrupt_in:	DONT_CARE,				/* don't have to have an interrupt in endpoint */
-	needs_bulk_in:		DONT_CARE,				/* don't have to have a bulk in endpoint */
-	needs_bulk_out:		DONT_CARE,				/* don't have to have a bulk out endpoint */
 	num_interrupt_in:	NUM_DONT_CARE,
 	num_bulk_in:		NUM_DONT_CARE,
 	num_bulk_out:		NUM_DONT_CARE,
 	num_ports:		1,
-	startup:		whiteheat_startup	
+	startup:		whiteheat_fake_startup,
 };
 
 static struct usb_serial_device_type whiteheat_device = {
 	name:			"Connect Tech - WhiteHEAT",
 	id_table:		id_table_std,
-	needs_interrupt_in:	DONT_CARE,				/* don't have to have an interrupt in endpoint */
-	needs_bulk_in:		DONT_CARE,				/* don't have to have a bulk in endpoint */
-	needs_bulk_out:		DONT_CARE,				/* don't have to have a bulk out endpoint */
 	num_interrupt_in:	NUM_DONT_CARE,
 	num_bulk_in:		NUM_DONT_CARE,
 	num_bulk_out:		NUM_DONT_CARE,
@@ -160,7 +155,8 @@ static struct usb_serial_device_type whiteheat_device = {
 	unthrottle:		whiteheat_unthrottle,
 	ioctl:			whiteheat_ioctl,
 	set_termios:		whiteheat_set_termios,
-	shutdown:		whiteheat_shutdown,
+	startup:		whiteheat_real_startup,
+	shutdown:		whiteheat_real_shutdown,
 };
 
 struct whiteheat_private {
@@ -539,7 +535,7 @@ static void whiteheat_unthrottle (struct usb_serial_port *port)
  - device renumerated itself and comes up as new device id with all
    firmware download completed.
 */
-static int  whiteheat_startup (struct usb_serial *serial)
+static int  whiteheat_fake_startup (struct usb_serial *serial)
 {
 	int response;
 	const struct whiteheat_hex_record *record;
@@ -598,7 +594,66 @@ static int  whiteheat_startup (struct usb_serial *serial)
 }
 
 
-static void whiteheat_shutdown (struct usb_serial *serial)
+static int  whiteheat_real_startup (struct usb_serial *serial)
+{
+	struct whiteheat_hw_info *hw_info;
+	int pipe;
+	int ret;
+	int alen;
+	__u8 command[2] = { WHITEHEAT_GET_HW_INFO, 0 };
+	__u8 result[sizeof(*hw_info) + 1];
+
+	pipe = usb_rcvbulkpipe (serial->dev, 7);
+	usb_bulk_msg (serial->dev, pipe, result, sizeof(result), &alen, 2 * HZ);
+	/*
+	 * We ignore the return code. In the case where rmmod/insmod is
+	 * performed with a WhiteHEAT connected, the above times out
+	 * because the endpoint is already prepped, meaning the below succeeds
+	 * regardless. All other cases the above succeeds.
+	 */
+
+	pipe = usb_sndbulkpipe (serial->dev, 7);
+	ret = usb_bulk_msg (serial->dev, pipe, command, sizeof(command), &alen, 2 * HZ);
+	if (ret) {
+		err("%s: Couldn't send command [%d]", serial->type->name, ret);
+		goto error_out;
+	} else if (alen != sizeof(command)) {
+		err("%s: Send command incomplete [%d]", serial->type->name, alen);
+		goto error_out;
+	}
+
+	pipe = usb_rcvbulkpipe (serial->dev, 7);
+	ret = usb_bulk_msg (serial->dev, pipe, result, sizeof(result), &alen, 2 * HZ);
+	if (ret) {
+		err("%s: Couldn't get results [%d]", serial->type->name, ret);
+		goto error_out;
+	} else if (alen != sizeof(result)) {
+		err("%s: Get results incomplete [%d]", serial->type->name, alen);
+		goto error_out;
+	} else if (result[0] != command[0]) {
+		err("%s: Command failed [%d]", serial->type->name, result[0]);
+		goto error_out;
+	}
+
+	hw_info = (struct whiteheat_hw_info *)&result[1];
+
+	info("%s: Driver %s: Firmware v%d.%02d", serial->type->name,
+	     DRIVER_VERSION, hw_info->sw_major_rev, hw_info->sw_minor_rev);
+
+	return 0;
+
+error_out:
+	err("%s: Unable to retrieve firmware version, try replugging\n", serial->type->name);
+	/*
+	 * Return that we've claimed the interface. A failure here may be
+	 * due to interception by the command_callback routine or other
+	 * causes that don't mean that the firmware isn't running. This may
+	 * change in the future. Probably should actually.
+	 */
+	return 0;
+}
+
+static void whiteheat_real_shutdown (struct usb_serial *serial)
 {
 	struct usb_serial_port 		*command_port;
 	int i;
@@ -660,7 +715,7 @@ static int __init whiteheat_init (void)
 {
 	usb_serial_register (&whiteheat_fake_device);
 	usb_serial_register (&whiteheat_device);
-	info(DRIVER_VERSION ":" DRIVER_DESC);
+	info(DRIVER_DESC " " DRIVER_VERSION);
 	return 0;
 }
 

fs/bio.c

@@ -215,6 +215,9 @@ inline void bio_init(struct bio *bio)
 	atomic_set(&bio->bi_cnt, 1);
 	bio->bi_flags = 0;
 	bio->bi_rw = 0;
+	bio->bi_vcnt = 0;
+	bio->bi_idx = 0;
+	bio->bi_size = 0;
 	bio->bi_end_io = NULL;
 }
 

fs/proc/proc_misc.c

@@ -318,7 +318,7 @@ static int partitions_read_proc(char *page, char **start, off_t off,
 
 static void *single_start(struct seq_file *p, loff_t *pos)
 {
-	return (void *)(*pos == 0);
+	return NULL + (*pos == 0);
 }
 static void *single_next(struct seq_file *p, void *v, loff_t *pos)
 {
@@ -561,9 +561,7 @@ void __init proc_misc_init(void)
 		entry->proc_fops = &proc_kmsg_operations;
 	create_seq_entry("mounts", 0, &proc_mounts_operations);
 	create_seq_entry("cpuinfo", 0, &proc_cpuinfo_operations);
-#if defined(CONFIG_ARCH_S390) || defined(CONFIG_X86) || defined(CONFIG_ARCH_MIPS)
 	create_seq_entry("interrupts", 0, &proc_interrupts_operations);
-#endif
 #ifdef CONFIG_MODULES
 	create_seq_entry("ksyms", 0, &proc_ksyms_operations);
 #endif

include/asm-alpha/page.h

@@ -64,8 +64,15 @@ do {										\
 	printk("kernel BUG at %s:%d!\n", __FILE__, __LINE__);			\
 	__asm__ __volatile__("call_pal %0  # bugchk" : : "i" (PAL_bugchk));	\
 } while (0)
+
 #define PAGE_BUG(page)	BUG()
 
+#define BUG_ON(condition)			\
+	do {					\
+		if (unlikely((long)(condition)))\
+			BUG();			\
+	} while (0)
+
 /* Pure 2^n version of get_order */
 extern __inline__ int get_order(unsigned long size)
 {

include/linux/bio.h

@@ -93,10 +93,9 @@ struct bio {
 #define bio_iovec_idx(bio, idx)	(&((bio)->bi_io_vec[(bio)->bi_idx]))
 #define bio_iovec(bio)		bio_iovec_idx((bio), (bio)->bi_idx)
 #define bio_page(bio)		bio_iovec((bio))->bv_page
-#define bio_size(bio)		((bio)->bi_size)
 #define __bio_offset(bio, idx)	bio_iovec_idx((bio), (idx))->bv_offset
 #define bio_offset(bio)		bio_iovec((bio))->bv_offset
-#define bio_sectors(bio)	(bio_size((bio)) >> 9)
+#define bio_sectors(bio)	((bio)->bi_size >> 9)
 #define bio_data(bio)		(page_address(bio_page((bio))) + bio_offset((bio)))
 #define bio_barrier(bio)	((bio)->bi_rw & (1 << BIO_BARRIER))
 
@@ -106,13 +105,6 @@ struct bio {
 #define bio_to_phys(bio)	(page_to_phys(bio_page((bio))) + bio_offset((bio)))
 #define bvec_to_phys(bv)	(page_to_phys((bv)->bv_page) + (bv)->bv_offset)
 
-/*
- * hack to avoid doing 64-bit calculations on 32-bit archs, instead use a
- * pseudo-pfn check to do segment coalescing
- */
-#define bio_sec_pfn(bio) \
-	((((bio_page(bio) - bio_page(bio)->zone->zone_mem_map) << PAGE_SHIFT) / bio_size(bio)) + (bio_offset(bio) >> 9))
-
 /*
  * queues that have highmem support enabled may still need to revert to
  * PIO transfers occasionally and thus map high pages temporarily. For
@@ -124,12 +116,16 @@ struct bio {
 #define __bio_kunmap(bio, idx)	kunmap(bio_iovec_idx((bio), (idx))->bv_page)
 #define bio_kunmap(bio)		__bio_kunmap((bio), (bio)->bi_idx)
 
+/*
+ * merge helpers etc
+ */
+#define __BVEC_END(bio) bio_iovec_idx((bio), (bio)->bi_idx - 1)
 #define BIO_CONTIG(bio, nxt) \
-	(bio_to_phys((bio)) + bio_size((bio)) == bio_to_phys((nxt)))
+	(bvec_to_phys(__BVEC_END((bio)) + (bio)->bi_size) ==bio_to_phys((nxt)))
 #define __BIO_SEG_BOUNDARY(addr1, addr2, mask) \
 	(((addr1) | (mask)) == (((addr2) - 1) | (mask)))
 #define BIO_SEG_BOUNDARY(q, b1, b2) \
-	__BIO_SEG_BOUNDARY(bvec_to_phys(bio_iovec_idx((b1), (b1)->bi_cnt - 1)), bio_to_phys((b2)) + bio_size((b2)), (q)->seg_boundary_mask)
+	__BIO_SEG_BOUNDARY(bvec_to_phys(__BVEC_END((b1))), bio_to_phys((b2)) + (b2)->bi_size, (q)->seg_boundary_mask)
 
 typedef int (bio_end_io_t) (struct bio *, int);
 typedef void (bio_destructor_t) (struct bio *);

include/linux/blkdev.h

@@ -177,14 +177,11 @@ extern inline struct request *elv_next_request(request_queue_t *q)
 
 #ifdef CONFIG_HIGHMEM
 
-extern void create_bounce(struct bio **bio_orig, int gfp_mask);
+extern void create_bounce(unsigned long pfn, struct bio **bio_orig, int gfp_mask);
 
 extern inline void blk_queue_bounce(request_queue_t *q, struct bio **bio)
 {
-	struct page *page = bio_page(*bio);
-
-	if ((page - page->zone->zone_mem_map) + (page->zone->zone_start_paddr >> PAGE_SHIFT) < q->bounce_pfn)
-		create_bounce(bio, q->bounce_gfp);
+	create_bounce(q->bounce_pfn, bio, q->bounce_gfp);
 }
 
 #else /* CONFIG_HIGHMEM */
@@ -234,7 +231,7 @@ extern void blk_attempt_remerge(request_queue_t *, struct request *);
 extern int blk_init_queue(request_queue_t *, request_fn_proc *);
 extern void blk_cleanup_queue(request_queue_t *);
 extern void blk_queue_make_request(request_queue_t *, make_request_fn *);
-extern void blk_queue_bounce_limit(request_queue_t *, unsigned long long);
+extern void blk_queue_bounce_limit(request_queue_t *, u64);
 extern void blk_queue_max_sectors(request_queue_t *q, unsigned short);
 extern void blk_queue_max_segments(request_queue_t *q, unsigned short);
 extern void blk_queue_max_segment_size(request_queue_t *q, unsigned int);

include/linux/highmem.h

@@ -13,7 +13,7 @@ extern struct page *highmem_start_page;
 /* declarations for linux/mm/highmem.c */
 unsigned int nr_free_highpages(void);
 
-extern void create_bounce(struct bio **bio_orig, int gfp_mask);
+extern void create_bounce(unsigned long pfn, struct bio **bio_orig, int gfp_mask);
 
 static inline char *bh_kmap(struct buffer_head *bh)
 {

mm/highmem.c

@@ -207,35 +207,31 @@ static LIST_HEAD(emergency_bhs);
  * queue gfp mask set, *to may or may not be a highmem page. kmap it
  * always, it will do the Right Thing
  */
-static inline void copy_from_high_bio(struct bio *to, struct bio *from)
+static inline void copy_to_high_bio_irq(struct bio *to, struct bio *from)
 {
 	unsigned char *vto, *vfrom;
+	unsigned long flags;
+	struct bio_vec *tovec, *fromvec;
+	int i;
 
-	if (unlikely(in_interrupt()))
-		BUG();
-
-	vto = bio_kmap(to);
-	vfrom = bio_kmap(from);
-
-	memcpy(vto, vfrom + bio_offset(from), bio_size(to));
+	bio_for_each_segment(tovec, to, i) {
+		fromvec = &from->bi_io_vec[i];
 
-	bio_kunmap(from);
-	bio_kunmap(to);
-}
+		/*
+		 * not bounced
+		 */
+		if (tovec->bv_page == fromvec->bv_page)
+			continue;
 
-static inline void copy_to_high_bio_irq(struct bio *to, struct bio *from)
-{
-	unsigned char *vto, *vfrom;
-	unsigned long flags;
+		vfrom = page_address(fromvec->bv_page) + fromvec->bv_offset;
 
-	__save_flags(flags);
-	__cli();
-	vto = kmap_atomic(bio_page(to), KM_BOUNCE_READ);
-	vfrom = kmap_atomic(bio_page(from), KM_BOUNCE_READ);
-	memcpy(vto + bio_offset(to), vfrom, bio_size(to));
-	kunmap_atomic(vfrom, KM_BOUNCE_READ);
-	kunmap_atomic(vto, KM_BOUNCE_READ);
-	__restore_flags(flags);
+		__save_flags(flags);
+		__cli();
+		vto = kmap_atomic(tovec->bv_page, KM_BOUNCE_READ);
+		memcpy(vto + tovec->bv_offset, vfrom, to->bi_size);
+		kunmap_atomic(vto, KM_BOUNCE_READ);
+		__restore_flags(flags);
+	}
 }
 
 static __init int init_emergency_pool(void)
@@ -347,15 +343,64 @@ struct page *alloc_bounce_page(int gfp_mask)
 	goto repeat_alloc;
 }
 
-void create_bounce(struct bio **bio_orig, int gfp_mask)
+void create_bounce(unsigned long pfn, struct bio **bio_orig, int gfp_mask)
 {
 	struct page *page;
-	struct bio *bio;
+	struct bio *bio = NULL;
 	int i, rw = bio_data_dir(*bio_orig);
+	struct bio_vec *to, *from;
 
 	BUG_ON((*bio_orig)->bi_idx);
 
-	bio = bio_alloc(GFP_NOHIGHIO, (*bio_orig)->bi_vcnt);
+	bio_for_each_segment(from, *bio_orig, i) {
+		page = from->bv_page;
+
+		/*
+		 * is destination page below bounce pfn?
+		 */
+		if ((page - page->zone->zone_mem_map) + (page->zone->zone_start_paddr >> PAGE_SHIFT) < pfn)
+			continue;
+
+		/*
+		 * irk, bounce it
+		 */
+		if (!bio)
+			bio = bio_alloc(GFP_NOHIGHIO, (*bio_orig)->bi_vcnt);
+
+		to = &bio->bi_io_vec[i];
+
+		to->bv_page = alloc_bounce_page(gfp_mask);
+		to->bv_len = from->bv_len;
+		to->bv_offset = from->bv_offset;
+
+		if (rw & WRITE) {
+			char *vto, *vfrom;
+
+			vto = page_address(to->bv_page) + to->bv_offset;
+			vfrom = kmap(from->bv_page);
+			memcpy(vto, vfrom + from->bv_offset, to->bv_len);
+			kunmap(to->bv_page);
+		}
+	}
+
+	/*
+	 * no pages bounced
+	 */
+	if (!bio)
+		return;
+
+	/*
+	 * at least one page was bounced, fill in possible non-highmem
+	 * pages
+	 */
+	bio_for_each_segment(from, *bio_orig, i) {
+		to = &bio->bi_io_vec[i];
+		if (!to->bv_page) {
+			to->bv_page = from->bv_page;
+			to->bv_len = from->bv_len;
+			to->bv_offset = to->bv_offset;
+		}
+	}
 
 	bio->bi_dev = (*bio_orig)->bi_dev;
 	bio->bi_sector = (*bio_orig)->bi_sector;
@@ -370,23 +415,6 @@ void create_bounce(struct bio **bio_orig, int gfp_mask)
 	else
 		bio->bi_end_io = bounce_end_io_read;
 
-	for (i = 0; i < bio->bi_vcnt; i++) {
-		char *vto, *vfrom;
-
-		page = alloc_bounce_page(gfp_mask);
-
-		bio->bi_io_vec[i].bv_page = page;
-		bio->bi_io_vec[i].bv_len = (*bio_orig)->bi_io_vec[i].bv_len;
-		bio->bi_io_vec[i].bv_offset = 0;
-
-		if (rw & WRITE) {
-			vto = page_address(page);
-			vfrom = __bio_kmap(*bio_orig, i);
-			memcpy(vto, vfrom + __bio_offset(*bio_orig, i), bio->bi_io_vec[i].bv_len);
-			__bio_kunmap(bio, i);
-		}
-	}
-
 	bio->bi_private = *bio_orig;
 	*bio_orig = bio;
 }

net/ipv4/ipconfig.c

@@ -47,6 +47,7 @@
 #include <linux/route.h>
 #include <linux/udp.h>
 #include <linux/proc_fs.h>
+#include <linux/major.h>
 #include <net/arp.h>
 #include <net/ip.h>
 #include <net/ipconfig.h>