Skip to content

L
linux
Commit 4191c340 authored by Lothar Waßmann's avatar Lothar Waßmann Committed by Shawn Guo
Browse files
Options

ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines 

Convert mx23/mx28 dts files to use the padconfig defintions from
mxs-pinfunc.h.
Signed-off-by: default avatarLothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: default avatarShawn Guo <shawn.guo@linaro.org>
parent bc3875f1
Expand all Show whitespace changes
Inline Side-by-side
Showing with 287 additions and 287 deletions
arch/arm/boot/dts/imx23-evk.dts
View file @ 4191c340
...@@ -50,9 +50,9 @@ MX23_PAD_PWM3__GPIO_1_29 ...@@ -50,9 +50,9 @@ MX23_PAD_PWM3__GPIO_1_29
MX23_PAD_PWM4__GPIO_1_30 MX23_PAD_PWM4__GPIO_1_30
MX23_PAD_SSP1_DETECT__SSP1_DETECT MX23_PAD_SSP1_DETECT__SSP1_DETECT
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
}; };
......
arch/arm/boot/dts/imx23-olinuxino.dts
View file @ 4191c340
...@@ -42,9 +42,9 @@ hog_pins_a: hog@0 { ...@@ -42,9 +42,9 @@ hog_pins_a: hog@0 {
fsl,pinmux-ids = < fsl,pinmux-ids = <
MX23_PAD_GPMI_ALE__GPIO_0_17 MX23_PAD_GPMI_ALE__GPIO_0_17
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
led_pin_gpio2_1: led_gpio2_1@0 { led_pin_gpio2_1: led_gpio2_1@0 {
...@@ -52,9 +52,9 @@ led_pin_gpio2_1: led_gpio2_1@0 { ...@@ -52,9 +52,9 @@ led_pin_gpio2_1: led_gpio2_1@0 {
fsl,pinmux-ids = < fsl,pinmux-ids = <
MX23_PAD_SSP1_DETECT__GPIO_2_1 MX23_PAD_SSP1_DETECT__GPIO_2_1
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
}; };
......
arch/arm/boot/dts/imx23-stmp378x_devb.dts
View file @ 4191c340
...@@ -42,9 +42,9 @@ hog_pins_a: hog@0 { ...@@ -42,9 +42,9 @@ hog_pins_a: hog@0 {
MX23_PAD_PWM3__GPIO_1_29 MX23_PAD_PWM3__GPIO_1_29
MX23_PAD_PWM4__GPIO_1_30 MX23_PAD_PWM4__GPIO_1_30
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
}; };
}; };
......
arch/arm/boot/dts/imx23.dtsi
View file @ 4191c340
...@@ -141,9 +141,9 @@ duart_pins_a: duart@0 { ...@@ -141,9 +141,9 @@ duart_pins_a: duart@0 {
MX23_PAD_PWM0__DUART_RX MX23_PAD_PWM0__DUART_RX
MX23_PAD_PWM1__DUART_TX MX23_PAD_PWM1__DUART_TX
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
auart0_pins_a: auart0@0 { auart0_pins_a: auart0@0 {
...@@ -154,9 +154,9 @@ MX23_PAD_AUART1_TX__AUART1_TX ...@@ -154,9 +154,9 @@ MX23_PAD_AUART1_TX__AUART1_TX
MX23_PAD_AUART1_CTS__AUART1_CTS MX23_PAD_AUART1_CTS__AUART1_CTS
MX23_PAD_AUART1_RTS__AUART1_RTS MX23_PAD_AUART1_RTS__AUART1_RTS
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
auart0_2pins_a: auart0-2pins@0 { auart0_2pins_a: auart0-2pins@0 {
...@@ -165,9 +165,9 @@ auart0_2pins_a: auart0-2pins@0 { ...@@ -165,9 +165,9 @@ auart0_2pins_a: auart0-2pins@0 {
MX23_PAD_I2C_SCL__AUART1_TX MX23_PAD_I2C_SCL__AUART1_TX
MX23_PAD_I2C_SDA__AUART1_RX MX23_PAD_I2C_SDA__AUART1_RX
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
gpmi_pins_a: gpmi-nand@0 { gpmi_pins_a: gpmi-nand@0 {
...@@ -191,9 +191,9 @@ MX23_PAD_GPMI_RDN__GPMI_RDN ...@@ -191,9 +191,9 @@ MX23_PAD_GPMI_RDN__GPMI_RDN
MX23_PAD_GPMI_CE1N__GPMI_CE1N MX23_PAD_GPMI_CE1N__GPMI_CE1N
MX23_PAD_GPMI_CE0N__GPMI_CE0N MX23_PAD_GPMI_CE0N__GPMI_CE0N
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
gpmi_pins_fixup: gpmi-pins-fixup { gpmi_pins_fixup: gpmi-pins-fixup {
...@@ -202,7 +202,7 @@ MX23_PAD_GPMI_WPN__GPMI_WPN ...@@ -202,7 +202,7 @@ MX23_PAD_GPMI_WPN__GPMI_WPN
MX23_PAD_GPMI_WRN__GPMI_WRN MX23_PAD_GPMI_WRN__GPMI_WRN
MX23_PAD_GPMI_RDN__GPMI_RDN MX23_PAD_GPMI_RDN__GPMI_RDN
>; >;
fsl,drive-strength = <2>; fsl,drive-strength = <MXS_DRIVE_12mA>;
}; };
mmc0_4bit_pins_a: mmc0-4bit@0 { mmc0_4bit_pins_a: mmc0-4bit@0 {
...@@ -215,9 +215,9 @@ MX23_PAD_SSP1_DATA3__SSP1_DATA3 ...@@ -215,9 +215,9 @@ MX23_PAD_SSP1_DATA3__SSP1_DATA3
MX23_PAD_SSP1_CMD__SSP1_CMD MX23_PAD_SSP1_CMD__SSP1_CMD
MX23_PAD_SSP1_SCK__SSP1_SCK MX23_PAD_SSP1_SCK__SSP1_SCK
>; >;
fsl,drive-strength = <1>; fsl,drive-strength = <MXS_DRIVE_8mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <1>; fsl,pull-up = <MXS_PULL_ENABLE>;
}; };
mmc0_8bit_pins_a: mmc0-8bit@0 { mmc0_8bit_pins_a: mmc0-8bit@0 {
...@@ -235,9 +235,9 @@ MX23_PAD_SSP1_CMD__SSP1_CMD ...@@ -235,9 +235,9 @@ MX23_PAD_SSP1_CMD__SSP1_CMD
MX23_PAD_SSP1_DETECT__SSP1_DETECT MX23_PAD_SSP1_DETECT__SSP1_DETECT
MX23_PAD_SSP1_SCK__SSP1_SCK MX23_PAD_SSP1_SCK__SSP1_SCK
>; >;
fsl,drive-strength = <1>; fsl,drive-strength = <MXS_DRIVE_8mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <1>; fsl,pull-up = <MXS_PULL_ENABLE>;
}; };
mmc0_pins_fixup: mmc0-pins-fixup { mmc0_pins_fixup: mmc0-pins-fixup {
...@@ -245,7 +245,7 @@ mmc0_pins_fixup: mmc0-pins-fixup { ...@@ -245,7 +245,7 @@ mmc0_pins_fixup: mmc0-pins-fixup {
MX23_PAD_SSP1_DETECT__SSP1_DETECT MX23_PAD_SSP1_DETECT__SSP1_DETECT
MX23_PAD_SSP1_SCK__SSP1_SCK MX23_PAD_SSP1_SCK__SSP1_SCK
>; >;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
pwm2_pins_a: pwm2@0 { pwm2_pins_a: pwm2@0 {
...@@ -253,9 +253,9 @@ pwm2_pins_a: pwm2@0 { ...@@ -253,9 +253,9 @@ pwm2_pins_a: pwm2@0 {
fsl,pinmux-ids = < fsl,pinmux-ids = <
MX23_PAD_PWM2__PWM2 MX23_PAD_PWM2__PWM2
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
lcdif_24bit_pins_a: lcdif-24bit@0 { lcdif_24bit_pins_a: lcdif-24bit@0 {
...@@ -290,9 +290,9 @@ MX23_PAD_LCD_ENABLE__LCD_ENABLE ...@@ -290,9 +290,9 @@ MX23_PAD_LCD_ENABLE__LCD_ENABLE
MX23_PAD_LCD_HSYNC__LCD_HSYNC MX23_PAD_LCD_HSYNC__LCD_HSYNC
MX23_PAD_LCD_VSYNC__LCD_VSYNC MX23_PAD_LCD_VSYNC__LCD_VSYNC
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
spi2_pins_a: spi2@0 { spi2_pins_a: spi2@0 {
...@@ -303,9 +303,9 @@ MX23_PAD_GPMI_RDY1__SSP2_CMD ...@@ -303,9 +303,9 @@ MX23_PAD_GPMI_RDY1__SSP2_CMD
MX23_PAD_GPMI_D00__SSP2_DATA0 MX23_PAD_GPMI_D00__SSP2_DATA0
MX23_PAD_GPMI_D03__SSP2_DATA3 MX23_PAD_GPMI_D03__SSP2_DATA3
>; >;
fsl,drive-strength = <1>; fsl,drive-strength = <MXS_DRIVE_8mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <1>; fsl,pull-up = <MXS_PULL_ENABLE>;
}; };
}; };
......
arch/arm/boot/dts/imx28-apf28dev.dts
View file @ 4191c340
...@@ -49,9 +49,9 @@ MX28_PAD_LCD_D20__GPIO_1_20 ...@@ -49,9 +49,9 @@ MX28_PAD_LCD_D20__GPIO_1_20
MX28_PAD_LCD_D21__GPIO_1_21 MX28_PAD_LCD_D21__GPIO_1_21
MX28_PAD_LCD_D22__GPIO_1_22 MX28_PAD_LCD_D22__GPIO_1_22
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
lcdif_pins_apf28dev: lcdif-apf28dev@0 { lcdif_pins_apf28dev: lcdif-apf28dev@0 {
...@@ -62,9 +62,9 @@ MX28_PAD_LCD_WR_RWN__LCD_HSYNC ...@@ -62,9 +62,9 @@ MX28_PAD_LCD_WR_RWN__LCD_HSYNC
MX28_PAD_LCD_RS__LCD_DOTCLK MX28_PAD_LCD_RS__LCD_DOTCLK
MX28_PAD_LCD_CS__LCD_ENABLE MX28_PAD_LCD_CS__LCD_ENABLE
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
}; };
......
arch/arm/boot/dts/imx28-apx4devkit.dts
View file @ 4191c340
...@@ -48,9 +48,9 @@ MX28_PAD_PWM3__GPIO_3_28 ...@@ -48,9 +48,9 @@ MX28_PAD_PWM3__GPIO_3_28
MX28_PAD_LCD_RESET__GPIO_3_30 MX28_PAD_LCD_RESET__GPIO_3_30
MX28_PAD_JTAG_RTCK__GPIO_4_20 MX28_PAD_JTAG_RTCK__GPIO_4_20
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
lcdif_pins_apx4: lcdif-apx4@0 { lcdif_pins_apx4: lcdif-apx4@0 {
...@@ -61,9 +61,9 @@ MX28_PAD_LCD_WR_RWN__LCD_HSYNC ...@@ -61,9 +61,9 @@ MX28_PAD_LCD_WR_RWN__LCD_HSYNC
MX28_PAD_LCD_RS__LCD_DOTCLK MX28_PAD_LCD_RS__LCD_DOTCLK
MX28_PAD_LCD_CS__LCD_ENABLE MX28_PAD_LCD_CS__LCD_ENABLE
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 { mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 {
...@@ -76,17 +76,17 @@ MX28_PAD_SSP0_DATA7__SSP2_SCK ...@@ -76,17 +76,17 @@ MX28_PAD_SSP0_DATA7__SSP2_SCK
MX28_PAD_SSP2_SS1__SSP2_D1 MX28_PAD_SSP2_SS1__SSP2_D1
MX28_PAD_SSP2_SS2__SSP2_D2 MX28_PAD_SSP2_SS2__SSP2_D2
>; >;
fsl,drive-strength = <1>; fsl,drive-strength = <MXS_DRIVE_8mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <1>; fsl,pull-up = <MXS_PULL_ENABLE>;
}; };
mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4 { mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4 {
fsl,pinmux-ids = < fsl,pinmux-ids = <
MX28_PAD_SSP0_DATA7__SSP2_SCK MX28_PAD_SSP0_DATA7__SSP2_SCK
>; >;
fsl,drive-strength = <2>; fsl,drive-strength = <MXS_DRIVE_12mA>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
}; };
......
arch/arm/boot/dts/imx28-cfa10036.dts
View file @ 4191c340
...@@ -28,9 +28,9 @@ ssd1306_cfa10036: ssd1306-10036@0 { ...@@ -28,9 +28,9 @@ ssd1306_cfa10036: ssd1306-10036@0 {
fsl,pinmux-ids = < fsl,pinmux-ids = <
MX28_PAD_SSP0_DATA7__GPIO_2_7 MX28_PAD_SSP0_DATA7__GPIO_2_7
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
led_pins_cfa10036: leds-10036@0 { led_pins_cfa10036: leds-10036@0 {
...@@ -38,9 +38,9 @@ led_pins_cfa10036: leds-10036@0 { ...@@ -38,9 +38,9 @@ led_pins_cfa10036: leds-10036@0 {
fsl,pinmux-ids = < fsl,pinmux-ids = <
MX28_PAD_AUART1_RX__GPIO_3_4 MX28_PAD_AUART1_RX__GPIO_3_4
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
usb0_otg_cfa10036: otg-10036@0 { usb0_otg_cfa10036: otg-10036@0 {
...@@ -48,9 +48,9 @@ usb0_otg_cfa10036: otg-10036@0 { ...@@ -48,9 +48,9 @@ usb0_otg_cfa10036: otg-10036@0 {
fsl,pinmux-ids = < fsl,pinmux-ids = <
MX28_PAD_GPMI_RDY0__USB0_ID MX28_PAD_GPMI_RDY0__USB0_ID
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
}; };
......
arch/arm/boot/dts/imx28-cfa10037.dts
View file @ 4191c340
...@@ -27,9 +27,9 @@ usb_pins_cfa10037: usb-10037@0 { ...@@ -27,9 +27,9 @@ usb_pins_cfa10037: usb-10037@0 {
fsl,pinmux-ids = < fsl,pinmux-ids = <
MX28_PAD_GPMI_D07__GPIO_0_7 MX28_PAD_GPMI_D07__GPIO_0_7
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
mac0_pins_cfa10037: mac0-10037@0 { mac0_pins_cfa10037: mac0-10037@0 {
...@@ -37,9 +37,9 @@ mac0_pins_cfa10037: mac0-10037@0 { ...@@ -37,9 +37,9 @@ mac0_pins_cfa10037: mac0-10037@0 {
fsl,pinmux-ids = < fsl,pinmux-ids = <
MX28_PAD_SSP2_SS2__GPIO_2_21 MX28_PAD_SSP2_SS2__GPIO_2_21
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
}; };
}; };
......
arch/arm/boot/dts/imx28-cfa10049.dts
View file @ 4191c340
...@@ -27,9 +27,9 @@ usb_pins_cfa10049: usb-10049@0 { ...@@ -27,9 +27,9 @@ usb_pins_cfa10049: usb-10049@0 {
fsl,pinmux-ids = < fsl,pinmux-ids = <
MX28_PAD_GPMI_D07__GPIO_0_7 MX28_PAD_GPMI_D07__GPIO_0_7
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
i2cmux_pins_cfa10049: i2cmux-10049@0 { i2cmux_pins_cfa10049: i2cmux-10049@0 {
...@@ -38,9 +38,9 @@ i2cmux_pins_cfa10049: i2cmux-10049@0 { ...@@ -38,9 +38,9 @@ i2cmux_pins_cfa10049: i2cmux-10049@0 {
MX28_PAD_LCD_D22__GPIO_1_22 MX28_PAD_LCD_D22__GPIO_1_22
MX28_PAD_LCD_D23__GPIO_1_23 MX28_PAD_LCD_D23__GPIO_1_23
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
mac0_pins_cfa10049: mac0-10049@0 { mac0_pins_cfa10049: mac0-10049@0 {
...@@ -48,9 +48,9 @@ mac0_pins_cfa10049: mac0-10049@0 { ...@@ -48,9 +48,9 @@ mac0_pins_cfa10049: mac0-10049@0 {
fsl,pinmux-ids = < fsl,pinmux-ids = <
MX28_PAD_SSP2_SS2__GPIO_2_21 MX28_PAD_SSP2_SS2__GPIO_2_21
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
pca_pins_cfa10049: pca-10049@0 { pca_pins_cfa10049: pca-10049@0 {
...@@ -58,9 +58,9 @@ pca_pins_cfa10049: pca-10049@0 { ...@@ -58,9 +58,9 @@ pca_pins_cfa10049: pca-10049@0 {
fsl,pinmux-ids = < fsl,pinmux-ids = <
MX28_PAD_SSP2_SS0__GPIO_2_19 MX28_PAD_SSP2_SS0__GPIO_2_19
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <1>; fsl,pull-up = <MXS_PULL_ENABLE>;
}; };
rotary_pins_cfa10049: rotary-10049@0 { rotary_pins_cfa10049: rotary-10049@0 {
...@@ -69,9 +69,9 @@ rotary_pins_cfa10049: rotary-10049@0 { ...@@ -69,9 +69,9 @@ rotary_pins_cfa10049: rotary-10049@0 {
MX28_PAD_I2C0_SCL__GPIO_3_24 MX28_PAD_I2C0_SCL__GPIO_3_24
MX28_PAD_I2C0_SDA__GPIO_3_25 MX28_PAD_I2C0_SDA__GPIO_3_25
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <1>; fsl,pull-up = <MXS_PULL_ENABLE>;
}; };
rotary_btn_pins_cfa10049: rotary-btn-10049@0 { rotary_btn_pins_cfa10049: rotary-btn-10049@0 {
...@@ -79,9 +79,9 @@ rotary_btn_pins_cfa10049: rotary-btn-10049@0 { ...@@ -79,9 +79,9 @@ rotary_btn_pins_cfa10049: rotary-btn-10049@0 {
fsl,pinmux-ids = < fsl,pinmux-ids = <
MX28_PAD_SAIF1_SDATA0__GPIO_3_26 MX28_PAD_SAIF1_SDATA0__GPIO_3_26
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <1>; fsl,pull-up = <MXS_PULL_ENABLE>;
}; };
spi2_pins_cfa10049: spi2-cfa10049@0 { spi2_pins_cfa10049: spi2-cfa10049@0 {
...@@ -92,9 +92,9 @@ MX28_PAD_SSP2_MOSI__GPIO_2_17 ...@@ -92,9 +92,9 @@ MX28_PAD_SSP2_MOSI__GPIO_2_17
MX28_PAD_SSP2_MISO__GPIO_2_18 MX28_PAD_SSP2_MISO__GPIO_2_18
MX28_PAD_AUART1_TX__GPIO_3_5 MX28_PAD_AUART1_TX__GPIO_3_5
>; >;
fsl,drive-strength = <1>; fsl,drive-strength = <MXS_DRIVE_8mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <1>; fsl,pull-up = <MXS_PULL_ENABLE>;
}; };
spi3_pins_cfa10049: spi3-cfa10049@0 { spi3_pins_cfa10049: spi3-cfa10049@0 {
...@@ -106,9 +106,9 @@ MX28_PAD_GPMI_CE1N__GPIO_0_17 ...@@ -106,9 +106,9 @@ MX28_PAD_GPMI_CE1N__GPIO_0_17
MX28_PAD_GPMI_ALE__GPIO_0_26 MX28_PAD_GPMI_ALE__GPIO_0_26
MX28_PAD_GPMI_CLE__GPIO_0_27 MX28_PAD_GPMI_CLE__GPIO_0_27
>; >;
fsl,drive-strength = <1>; fsl,drive-strength = <MXS_DRIVE_8mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <1>; fsl,pull-up = <MXS_PULL_ENABLE>;
}; };
lcdif_18bit_pins_cfa10049: lcdif-18bit@0 { lcdif_18bit_pins_cfa10049: lcdif-18bit@0 {
...@@ -133,9 +133,9 @@ MX28_PAD_LCD_D15__LCD_D15 ...@@ -133,9 +133,9 @@ MX28_PAD_LCD_D15__LCD_D15
MX28_PAD_LCD_D16__LCD_D16 MX28_PAD_LCD_D16__LCD_D16
MX28_PAD_LCD_D17__LCD_D17 MX28_PAD_LCD_D17__LCD_D17
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
lcdif_pins_cfa10049: lcdif-evk@0 { lcdif_pins_cfa10049: lcdif-evk@0 {
...@@ -146,9 +146,9 @@ MX28_PAD_LCD_WR_RWN__LCD_HSYNC ...@@ -146,9 +146,9 @@ MX28_PAD_LCD_WR_RWN__LCD_HSYNC
MX28_PAD_LCD_RS__LCD_DOTCLK MX28_PAD_LCD_RS__LCD_DOTCLK
MX28_PAD_LCD_CS__LCD_ENABLE MX28_PAD_LCD_CS__LCD_ENABLE
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
lcdif_pins_cfa10049_pullup: lcdif-10049-pullup@0 { lcdif_pins_cfa10049_pullup: lcdif-10049-pullup@0 {
...@@ -156,9 +156,9 @@ lcdif_pins_cfa10049_pullup: lcdif-10049-pullup@0 { ...@@ -156,9 +156,9 @@ lcdif_pins_cfa10049_pullup: lcdif-10049-pullup@0 {
fsl,pinmux-ids = < fsl,pinmux-ids = <
MX28_PAD_LCD_RESET__GPIO_3_30 MX28_PAD_LCD_RESET__GPIO_3_30
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <1>; fsl,pull-up = <MXS_PULL_ENABLE>;
}; };
w1_gpio_pins: w1-gpio@0 { w1_gpio_pins: w1-gpio@0 {
...@@ -166,9 +166,9 @@ w1_gpio_pins: w1-gpio@0 { ...@@ -166,9 +166,9 @@ w1_gpio_pins: w1-gpio@0 {
fsl,pinmux-ids = < fsl,pinmux-ids = <
MX28_PAD_LCD_D21__GPIO_1_21 MX28_PAD_LCD_D21__GPIO_1_21
>; >;
fsl,drive-strength = <1>; fsl,drive-strength = <MXS_DRIVE_8mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; /* 0 will enable the keeper */ fsl,pull-up = <MXS_PULL_DISABLE>; /* 0 will enable the keeper */
}; };
}; };
......
arch/arm/boot/dts/imx28-cfa10055.dts
View file @ 4191c340
...@@ -31,9 +31,9 @@ MX28_PAD_SSP2_MOSI__GPIO_2_17 ...@@ -31,9 +31,9 @@ MX28_PAD_SSP2_MOSI__GPIO_2_17
MX28_PAD_SSP2_MISO__GPIO_2_18 MX28_PAD_SSP2_MISO__GPIO_2_18
MX28_PAD_AUART1_TX__GPIO_3_5 MX28_PAD_AUART1_TX__GPIO_3_5
>; >;
fsl,drive-strength = <1>; fsl,drive-strength = <MXS_DRIVE_8mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <1>; fsl,pull-up = <MXS_PULL_ENABLE>;
}; };
lcdif_18bit_pins_cfa10055: lcdif-18bit@0 { lcdif_18bit_pins_cfa10055: lcdif-18bit@0 {
...@@ -58,9 +58,9 @@ MX28_PAD_LCD_D15__LCD_D15 ...@@ -58,9 +58,9 @@ MX28_PAD_LCD_D15__LCD_D15
MX28_PAD_LCD_D16__LCD_D16 MX28_PAD_LCD_D16__LCD_D16
MX28_PAD_LCD_D17__LCD_D17 MX28_PAD_LCD_D17__LCD_D17
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
lcdif_pins_cfa10055: lcdif-evk@0 { lcdif_pins_cfa10055: lcdif-evk@0 {
...@@ -71,9 +71,9 @@ MX28_PAD_LCD_WR_RWN__LCD_HSYNC ...@@ -71,9 +71,9 @@ MX28_PAD_LCD_WR_RWN__LCD_HSYNC
MX28_PAD_LCD_RS__LCD_DOTCLK MX28_PAD_LCD_RS__LCD_DOTCLK
MX28_PAD_LCD_CS__LCD_ENABLE MX28_PAD_LCD_CS__LCD_ENABLE
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 { lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 {
...@@ -81,9 +81,9 @@ lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 { ...@@ -81,9 +81,9 @@ lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 {
fsl,pinmux-ids = < fsl,pinmux-ids = <
MX28_PAD_LCD_RESET__GPIO_3_30 MX28_PAD_LCD_RESET__GPIO_3_30
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <1>; fsl,pull-up = <MXS_PULL_ENABLE>;
}; };
}; };
......
arch/arm/boot/dts/imx28-cfa10056.dts
View file @ 4191c340
...@@ -30,9 +30,9 @@ MX28_PAD_SSP2_MOSI__GPIO_2_17 ...@@ -30,9 +30,9 @@ MX28_PAD_SSP2_MOSI__GPIO_2_17
MX28_PAD_SSP2_MISO__GPIO_2_18 MX28_PAD_SSP2_MISO__GPIO_2_18
MX28_PAD_AUART1_TX__GPIO_3_5 MX28_PAD_AUART1_TX__GPIO_3_5
>; >;
fsl,drive-strength = <1>; fsl,drive-strength = <MXS_DRIVE_8mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <1>; fsl,pull-up = <MXS_PULL_ENABLE>;
}; };
lcdif_pins_cfa10056: lcdif-10056@0 { lcdif_pins_cfa10056: lcdif-10056@0 {
...@@ -43,9 +43,9 @@ MX28_PAD_LCD_WR_RWN__LCD_HSYNC ...@@ -43,9 +43,9 @@ MX28_PAD_LCD_WR_RWN__LCD_HSYNC
MX28_PAD_LCD_RS__LCD_DOTCLK MX28_PAD_LCD_RS__LCD_DOTCLK
MX28_PAD_LCD_CS__LCD_ENABLE MX28_PAD_LCD_CS__LCD_ENABLE
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 { lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 {
...@@ -53,9 +53,9 @@ lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 { ...@@ -53,9 +53,9 @@ lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 {
fsl,pinmux-ids = < fsl,pinmux-ids = <
MX28_PAD_LCD_RESET__GPIO_3_30 MX28_PAD_LCD_RESET__GPIO_3_30
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <1>; fsl,pull-up = <MXS_PULL_ENABLE>;
}; };
}; };
......
arch/arm/boot/dts/imx28-cfa10057.dts
View file @ 4191c340
...@@ -28,9 +28,9 @@ usb_pins_cfa10057: usb-10057@0 { ...@@ -28,9 +28,9 @@ usb_pins_cfa10057: usb-10057@0 {
fsl,pinmux-ids = < fsl,pinmux-ids = <
MX28_PAD_GPMI_D07__GPIO_0_7 MX28_PAD_GPMI_D07__GPIO_0_7
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
lcdif_18bit_pins_cfa10057: lcdif-18bit@0 { lcdif_18bit_pins_cfa10057: lcdif-18bit@0 {
...@@ -55,9 +55,9 @@ MX28_PAD_LCD_D15__LCD_D15 ...@@ -55,9 +55,9 @@ MX28_PAD_LCD_D15__LCD_D15
MX28_PAD_LCD_D16__LCD_D16 MX28_PAD_LCD_D16__LCD_D16
MX28_PAD_LCD_D17__LCD_D17 MX28_PAD_LCD_D17__LCD_D17
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
lcdif_pins_cfa10057: lcdif-evk@0 { lcdif_pins_cfa10057: lcdif-evk@0 {
...@@ -68,9 +68,9 @@ MX28_PAD_LCD_WR_RWN__LCD_HSYNC ...@@ -68,9 +68,9 @@ MX28_PAD_LCD_WR_RWN__LCD_HSYNC
MX28_PAD_LCD_RS__LCD_DOTCLK MX28_PAD_LCD_RS__LCD_DOTCLK
MX28_PAD_LCD_CS__LCD_ENABLE MX28_PAD_LCD_CS__LCD_ENABLE
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
}; };
......
arch/arm/boot/dts/imx28-cfa10058.dts
View file @ 4191c340
...@@ -28,9 +28,9 @@ usb_pins_cfa10058: usb-10058@0 { ...@@ -28,9 +28,9 @@ usb_pins_cfa10058: usb-10058@0 {
fsl,pinmux-ids = < fsl,pinmux-ids = <
MX28_PAD_GPMI_D07__GPIO_0_7 MX28_PAD_GPMI_D07__GPIO_0_7
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
lcdif_pins_cfa10058: lcdif-10058@0 { lcdif_pins_cfa10058: lcdif-10058@0 {
...@@ -41,9 +41,9 @@ MX28_PAD_LCD_WR_RWN__LCD_HSYNC ...@@ -41,9 +41,9 @@ MX28_PAD_LCD_WR_RWN__LCD_HSYNC
MX28_PAD_LCD_RS__LCD_DOTCLK MX28_PAD_LCD_RS__LCD_DOTCLK
MX28_PAD_LCD_CS__LCD_ENABLE MX28_PAD_LCD_CS__LCD_ENABLE
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
}; };
......
arch/arm/boot/dts/imx28-evk.dts
View file @ 4191c340
...@@ -79,9 +79,9 @@ MX28_PAD_LCD_RESET__GPIO_3_30 ...@@ -79,9 +79,9 @@ MX28_PAD_LCD_RESET__GPIO_3_30
MX28_PAD_AUART2_RX__GPIO_3_8 MX28_PAD_AUART2_RX__GPIO_3_8
MX28_PAD_AUART2_TX__GPIO_3_9 MX28_PAD_AUART2_TX__GPIO_3_9
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
led_pin_gpio3_5: led_gpio3_5@0 { led_pin_gpio3_5: led_gpio3_5@0 {
...@@ -89,9 +89,9 @@ led_pin_gpio3_5: led_gpio3_5@0 { ...@@ -89,9 +89,9 @@ led_pin_gpio3_5: led_gpio3_5@0 {
fsl,pinmux-ids = < fsl,pinmux-ids = <
MX28_PAD_AUART1_TX__GPIO_3_5 MX28_PAD_AUART1_TX__GPIO_3_5
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
gpmi_pins_evk: gpmi-nand-evk@0 { gpmi_pins_evk: gpmi-nand-evk@0 {
...@@ -100,9 +100,9 @@ gpmi_pins_evk: gpmi-nand-evk@0 { ...@@ -100,9 +100,9 @@ gpmi_pins_evk: gpmi-nand-evk@0 {
MX28_PAD_GPMI_CE1N__GPMI_CE1N MX28_PAD_GPMI_CE1N__GPMI_CE1N
MX28_PAD_GPMI_RDY1__GPMI_READY1 MX28_PAD_GPMI_RDY1__GPMI_READY1
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
lcdif_pins_evk: lcdif-evk@0 { lcdif_pins_evk: lcdif-evk@0 {
...@@ -113,9 +113,9 @@ MX28_PAD_LCD_WR_RWN__LCD_HSYNC ...@@ -113,9 +113,9 @@ MX28_PAD_LCD_WR_RWN__LCD_HSYNC
MX28_PAD_LCD_RS__LCD_DOTCLK MX28_PAD_LCD_RS__LCD_DOTCLK
MX28_PAD_LCD_CS__LCD_ENABLE MX28_PAD_LCD_CS__LCD_ENABLE
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
}; };
......
arch/arm/boot/dts/imx28-m28evk.dts
View file @ 4191c340
...@@ -98,9 +98,9 @@ MX28_PAD_AUART2_RTS__GPIO_3_11 ...@@ -98,9 +98,9 @@ MX28_PAD_AUART2_RTS__GPIO_3_11
MX28_PAD_AUART3_RX__GPIO_3_12 MX28_PAD_AUART3_RX__GPIO_3_12
MX28_PAD_AUART3_TX__GPIO_3_13 MX28_PAD_AUART3_TX__GPIO_3_13
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
lcdif_pins_m28: lcdif-m28@0 { lcdif_pins_m28: lcdif-m28@0 {
...@@ -109,9 +109,9 @@ lcdif_pins_m28: lcdif-m28@0 { ...@@ -109,9 +109,9 @@ lcdif_pins_m28: lcdif-m28@0 {
MX28_PAD_LCD_DOTCLK__LCD_DOTCLK MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
MX28_PAD_LCD_ENABLE__LCD_ENABLE MX28_PAD_LCD_ENABLE__LCD_ENABLE
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
}; };
......
arch/arm/boot/dts/imx28-sps1.dts
View file @ 4191c340
...@@ -33,9 +33,9 @@ MX28_PAD_GPMI_D00__GPIO_0_0 ...@@ -33,9 +33,9 @@ MX28_PAD_GPMI_D00__GPIO_0_0
MX28_PAD_GPMI_D03__GPIO_0_3 MX28_PAD_GPMI_D03__GPIO_0_3
MX28_PAD_GPMI_D06__GPIO_0_6 MX28_PAD_GPMI_D06__GPIO_0_6
>; >;
fsl,drive-strength = <0>; fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <1>; fsl,voltage = <MXS_VOLTAGE_HIGH>;
fsl,pull-up = <0>; fsl,pull-up = <MXS_PULL_DISABLE>;
}; };
}; };
......
arch/arm/boot/dts/imx28.dtsi
View file @ 4191c340
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7