ARM: dts: ux500: Fix up DSI controller nodes

These nodes should be named dsi-controller@* so fix it up.

Cc: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

arch/arm/boot/dts/ste-dbx5x0.dtsi

@@ -1097,7 +1097,7 @@ mcde@a0350000 {
 			ranges;
 			status = "disabled";
 
-			dsi0: dsi@a0351000 {
+			dsi0: dsi-controller@a0351000 {
 				compatible = "ste,mcde-dsi";
 				reg = <0xa0351000 0x1000>;
 				clocks = <&prcmu_clk PRCMU_DSI0CLK>, <&prcmu_clk PRCMU_DSI0ESCCLK>;
@@ -1105,7 +1105,7 @@ dsi0: dsi@a0351000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 			};
-			dsi1: dsi@a0352000 {
+			dsi1: dsi-controller@a0352000 {
 				compatible = "ste,mcde-dsi";
 				reg = <0xa0352000 0x1000>;
 				clocks = <&prcmu_clk PRCMU_DSI1CLK>, <&prcmu_clk PRCMU_DSI1ESCCLK>;
@@ -1113,7 +1113,7 @@ dsi1: dsi@a0352000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 			};
-			dsi2: dsi@a0353000 {
+			dsi2: dsi-controller@a0353000 {
 				compatible = "ste,mcde-dsi";
 				reg = <0xa0353000 0x1000>;
 				/* This DSI port only has the Low Power / Energy Save clock */

arch/arm/boot/dts/ste-href-tvk1281618-r2.dtsi

@@ -66,7 +66,7 @@ lis331dl@1c {
 		mcde@a0350000 {
 			status = "okay";
 
-			dsi@a0351000 {
+			dsi-controller@a0351000 {
 				panel {
 					compatible = "samsung,s6d16d0";
 					reg = <0>;

arch/arm/boot/dts/ste-href-tvk1281618-r3.dtsi

@@ -45,7 +45,7 @@ lis3dh@18 {
 		mcde@a0350000 {
 			status = "okay";
 
-			dsi@a0351000 {
+			dsi-controller@a0351000 {
 				panel {
 					compatible = "sony,acx424akp";
 					reg = <0>;