Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm: (30 commits)
  [ARM] Acorn: move the i2c bus driver into drivers/i2c
  [ARM] ARM SCSI: Don't try to dma_map_sg too many scatterlist entries
  [ARM] ARM FAS216: don't modify scsi_cmnd request_bufflen
  [ARM] rtc-pcf8583: Final fixes for this RTC on RiscPC
  [ARM] rtc-pcf8583: correct month and year offsets
  [ARM] rtc-pcf8583: don't use BCD_TO_BIN/BIN_TO_BCD
  [ARM] EBSA110: Work around build errors
  [ARM] 4241/1: Define mb() as compiler barrier on a uniprocessor system
  [ARM] 4239/1: S3C24XX: Update kconfig entries for PM
  [ARM] 4238/1: S3C24XX: docs: update suspend and resume
  [ARM] 4237/2: oprofile: Always allow backtraces on ARM
  [ARM] Yet more asm/apm-emulation.h stuff
  ARM: OMAP: Add missing get_irqnr_preamble and arch_ret_to_user for omap2
  ARM: OMAP: Use linux/delay.h not asm/delay.h
  ARM: OMAP: Remove obsolete alsa typedefs
  ARM: OMAP: omap1510->15xx conversions needed for sx1
  ARM: OMAP: Add missing includes to board-nokia770
  ARM: OMAP: Workqueue changes for board-h4.c
  ARM: OMAP: dmtimer.c omap1 register fix
  ARM: OMAP: board-nokia770: correct lcd name
  ...

Documentation/arm/Samsung-S3C24XX/Suspend.txt

@@ -5,10 +5,10 @@
 Introduction
 ------------
 
-  The S3C2410 supports a low-power suspend mode, where the SDRAM is kept
+  The S3C24XX supports a low-power suspend mode, where the SDRAM is kept
   in Self-Refresh mode, and all but the essential peripheral blocks are
   powered down. For more information on how this works, please look
-  at the S3C2410 datasheets from Samsung.
+  at the relevant CPU datasheet from Samsung.
 
 
 Requirements
@@ -56,6 +56,27 @@ Machine Support
   Note, the original method of adding an late_initcall() is wrong,
   and will end up initialising all compiled machines' pm init!
 
+  The following is an example of code used for testing wakeup from
+  an falling edge on IRQ_EINT0:
+
+
+static irqreturn_t button_irq(int irq, void *pw)
+{
+	return IRQ_HANDLED;
+}
+
+statuc void __init machine_init(void)
+{
+	...
+
+	request_irq(IRQ_EINT0, button_irq, IRQF_TRIGGER_FALLING,
+		   "button-irq-eint0", NULL);
+
+	enable_irq_wake(IRQ_EINT0);
+
+	s3c2410_pm_init();
+}
+
 
 Debugging
 ---------
@@ -70,6 +91,12 @@ Debugging
      care should be taken that any external clock sources that the UARTs
      rely on are still enabled at that point.
 
+  3) If any debugging is placed in the resume path, then it must have the
+     relevant clocks and peripherals setup before use (ie, bootloader).
+
+     For example, if you transmit a character from the UART, the baud
+     rate and uart controls must be setup beforehand.
+
 
 Configuration
 -------------
@@ -89,6 +116,10 @@ Configuration
     Allows the entire memory to be checksummed before and after the
     suspend to see if there has been any corruption of the contents.
 
+    Note, the time to calculate the CRC is dependant on the CPU speed
+    and the size of memory. For an 64Mbyte RAM area on an 200MHz
+    S3C2410, this can take approximately 4 seconds to complete.
+
     This support requires the CRC32 function to be enabled.
 
 

arch/arm/Kconfig

@@ -190,6 +190,7 @@ config ARCH_CO285
 config ARCH_EBSA110
 	bool "EBSA-110"
 	select ISA
+	select NO_IOPORT
 	help
 	  This is an evaluation board for the StrongARM processor available
 	  from Digital. It has limited hardware on-board, including an

arch/arm/mach-omap1/board-nokia770.c

@@ -16,6 +16,8 @@
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
+#include <linux/workqueue.h>
+#include <linux/delay.h>
 
 #include <asm/hardware.h>
 #include <asm/mach-types.h>
@@ -103,7 +105,7 @@ static struct ads7846_platform_data nokia770_ads7846_platform_data __initdata =
 
 static struct spi_board_info nokia770_spi_board_info[] __initdata = {
 	[0] = {
-		.modalias       = "lcd_lph8923",
+		.modalias		= "lcd_mipid",
 		.bus_num        = 2,
 		.chip_select    = 3,
 		.max_speed_hz   = 12000000,

arch/arm/mach-omap1/clock.c

@@ -432,8 +432,7 @@ static int omap1_clk_enable(struct clk *clk)
 			}
 
 			if (clk->flags & CLOCK_NO_IDLE_PARENT)
-				if (!cpu_is_omap24xx())
-					omap1_clk_deny_idle(clk->parent);
+				omap1_clk_deny_idle(clk->parent);
 		}
 
 		ret = clk->enable(clk);
@@ -454,8 +453,7 @@ static void omap1_clk_disable(struct clk *clk)
 		if (likely(clk->parent)) {
 			omap1_clk_disable(clk->parent);
 			if (clk->flags & CLOCK_NO_IDLE_PARENT)
-				if (!cpu_is_omap24xx())
-					omap1_clk_allow_idle(clk->parent);
+				omap1_clk_allow_idle(clk->parent);
 		}
 	}
 }
@@ -471,7 +469,7 @@ static int omap1_clk_enable_generic(struct clk *clk)
 	if (unlikely(clk->enable_reg == 0)) {
 		printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
 		       clk->name);
-		return 0;
+		return -EINVAL;
 	}
 
 	if (clk->flags & ENABLE_REG_32BIT) {
@@ -651,10 +649,18 @@ int __init omap1_clk_init(void)
 	int crystal_type = 0; /* Default 12 MHz */
 	u32 reg;
 
+#ifdef CONFIG_DEBUG_LL
+	/* Resets some clocks that may be left on from bootloader,
+	 * but leaves serial clocks on.
+ 	 */
+	omap_writel(0x3 << 29, MOD_CONF_CTRL_0);
+#endif
+
 	/* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */
 	reg = omap_readw(SOFT_REQ_REG) & (1 << 4);
 	omap_writew(reg, SOFT_REQ_REG);
-	omap_writew(0, SOFT_REQ_REG2);
+	if (!cpu_is_omap15xx())
+		omap_writew(0, SOFT_REQ_REG2);
 
 	clk_init(&omap1_clk_functions);
 
@@ -685,7 +691,7 @@ int __init omap1_clk_init(void)
 
 	info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config);
 	if (info != NULL) {
-		if (!cpu_is_omap1510())
+		if (!cpu_is_omap15xx())
 			crystal_type = info->system_clock_type;
 	}
 

arch/arm/mach-omap1/irq.c

@@ -238,7 +238,7 @@ void __init omap_init_irq(void)
 
 	if (cpu_is_omap730())
 		omap_unmask_irq(INT_730_IH2_IRQ);
-	else if (cpu_is_omap1510())
+	else if (cpu_is_omap15xx())
 		omap_unmask_irq(INT_1510_IH2_IRQ);
 	else if (cpu_is_omap16xx())
 		omap_unmask_irq(INT_1610_IH2_IRQ);

arch/arm/mach-omap1/pm.c

@@ -256,7 +256,8 @@ void omap_pm_suspend(void)
 		tps65010_set_led(LED1, OFF);
 	}
 
-	omap_writew(0xffff, ULPD_SOFT_DISABLE_REQ_REG);
+	if (!cpu_is_omap15xx())
+		omap_writew(0xffff, ULPD_SOFT_DISABLE_REQ_REG);
 
 	/*
 	 * Step 1: turn off interrupts (FIXME: NOTE: already disabled)
@@ -434,7 +435,8 @@ void omap_pm_suspend(void)
 		MPUI1610_RESTORE(OMAP_IH2_3_MIR);
 	}
 
-	omap_writew(0, ULPD_SOFT_DISABLE_REQ_REG);
+	if (!cpu_is_omap15xx())
+		omap_writew(0, ULPD_SOFT_DISABLE_REQ_REG);
 
 	/*
 	 * Reenable interrupts
@@ -704,6 +706,8 @@ static struct pm_ops omap_pm_ops ={
 
 static int __init omap_pm_init(void)
 {
+	int error;
+
 	printk("Power Management for TI OMAP.\n");
 
 	/*
@@ -760,7 +764,9 @@ static int __init omap_pm_init(void)
 	omap_pm_init_proc();
 #endif
 
-	subsys_create_file(&power_subsys, &sleep_while_idle_attr);
+	error = subsys_create_file(&power_subsys, &sleep_while_idle_attr);
+	if (error)
+		printk(KERN_ERR "subsys_create_file failed: %d\n", error);
 
 	if (cpu_is_omap16xx()) {
 		/* configure LOW_PWR pin */

arch/arm/mach-omap1/serial.c

 /*
  * linux/arch/arm/mach-omap1/serial.c
  *
- * OMAP1 CPU identification code
+ * OMAP1 serial support.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -59,7 +59,7 @@ static void __init omap_serial_reset(struct plat_serial8250_port *p)
 	omap_serial_outp(p, UART_OMAP_SCR, 0x08);	/* TX watermark */
 	omap_serial_outp(p, UART_OMAP_MDR1, 0x00);	/* enable UART */
 
-	if (!cpu_is_omap1510()) {
+	if (!cpu_is_omap15xx()) {
 		omap_serial_outp(p, UART_OMAP_SYSC, 0x01);
 		while (!(omap_serial_in(p, UART_OMAP_SYSC) & 0x01));
 	}
@@ -121,7 +121,7 @@ void __init omap_serial_init(void)
 		serial_platform_data[1].irq = INT_730_UART_MODEM_IRDA_2;
 	}
 
-	if (cpu_is_omap1510()) {
+	if (cpu_is_omap15xx()) {
 		serial_platform_data[0].uartclk = OMAP1510_BASE_BAUD * 16;
 		serial_platform_data[1].uartclk = OMAP1510_BASE_BAUD * 16;
 		serial_platform_data[2].uartclk = OMAP1510_BASE_BAUD * 16;
@@ -147,10 +147,10 @@ void __init omap_serial_init(void)
 				printk("Could not get uart1_ck\n");
 			else {
 				clk_enable(uart1_ck);
-				if (cpu_is_omap1510())
+				if (cpu_is_omap15xx())
 					clk_set_rate(uart1_ck, 12000000);
 			}
-			if (cpu_is_omap1510()) {
+			if (cpu_is_omap15xx()) {
 				omap_cfg_reg(UART1_TX);
 				omap_cfg_reg(UART1_RTS);
 				if (machine_is_omap_innovator()) {
@@ -167,12 +167,12 @@ void __init omap_serial_init(void)
 				printk("Could not get uart2_ck\n");
 			else {
 				clk_enable(uart2_ck);
-				if (cpu_is_omap1510())
+				if (cpu_is_omap15xx())
 					clk_set_rate(uart2_ck, 12000000);
 				else
 					clk_set_rate(uart2_ck, 48000000);
 			}
-			if (cpu_is_omap1510()) {
+			if (cpu_is_omap15xx()) {
 				omap_cfg_reg(UART2_TX);
 				omap_cfg_reg(UART2_RTS);
 				if (machine_is_omap_innovator()) {
@@ -189,10 +189,10 @@ void __init omap_serial_init(void)
 				printk("Could not get uart3_ck\n");
 			else {
 				clk_enable(uart3_ck);
-				if (cpu_is_omap1510())
+				if (cpu_is_omap15xx())
 					clk_set_rate(uart3_ck, 12000000);
 			}
-			if (cpu_is_omap1510()) {
+			if (cpu_is_omap15xx()) {
 				omap_cfg_reg(UART3_TX);
 				omap_cfg_reg(UART3_RX);
 			}

arch/arm/mach-omap2/board-h4.c

@@ -39,7 +39,6 @@
 #include "prcm-regs.h"
 
 #include <asm/io.h>
-#include <asm/delay.h>
 
 static unsigned int row_gpios[6] = { 88, 89, 124, 11, 6, 96 };
 static unsigned int col_gpios[7] = { 90, 91, 100, 36, 12, 97, 98 };
@@ -179,9 +178,11 @@ static int h4_select_irda(struct device *dev, int state)
 	return err;
 }
 
-static void set_trans_mode(void *data)
+static void set_trans_mode(struct work_struct *work)
 {
-	int *mode = data;
+	struct omap_irda_config *irda_config =
+		container_of(work, struct omap_irda_config, gpio_expa.work);
+	int mode = irda_config->mode;
 	unsigned char expa;
 	int err = 0;
 
@@ -191,7 +192,7 @@ static void set_trans_mode(void *data)
 
 	expa &= ~0x01;
 
-	if (!(*mode & IR_SIRMODE)) { /* MIR/FIR */
+	if (!(mode & IR_SIRMODE)) { /* MIR/FIR */
 		expa |= 0x01;
 	}
 
@@ -204,9 +205,9 @@ static int h4_transceiver_mode(struct device *dev, int mode)
 {
 	struct omap_irda_config *irda_config = dev->platform_data;
 
+	irda_config->mode = mode;
 	cancel_delayed_work(&irda_config->gpio_expa);
-	PREPARE_WORK(&irda_config->gpio_expa, set_trans_mode, &mode);
-#error this is not permitted - mode is an argument variable
+	PREPARE_DELAYED_WORK(&irda_config->gpio_expa, set_trans_mode);
 	schedule_delayed_work(&irda_config->gpio_expa, 0);
 
 	return 0;

arch/arm/mach-omap2/timer-gp.c

@@ -24,6 +24,7 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
+#include <linux/irq.h>
 
 #include <asm/mach/time.h>
 #include <asm/arch/dmtimer.h>
@@ -64,7 +65,7 @@ static void __init omap2_gp_timer_init(void)
 	BUG_ON(gptimer == NULL);
 
 	omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_SYS_CLK);
-	tick_period = clk_get_rate(omap_dm_timer_get_fclk(gptimer)) / 100;
+	tick_period = clk_get_rate(omap_dm_timer_get_fclk(gptimer)) / HZ;
 	tick_period -= 1;
 
 	setup_irq(omap_dm_timer_get_irq(gptimer), &omap2_gp_timer_irq);

arch/arm/mach-pxa/corgi_pm.c

@@ -16,7 +16,8 @@
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
-#include <asm/apm-emulation.h>
+#include <linux/apm-emulation.h>
+
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <asm/hardware.h>

arch/arm/mach-pxa/spitz_pm.c

@@ -16,7 +16,8 @@
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
-#include <asm/apm-emulation.h>
+#include <linux/apm-emulation.h>
+
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <asm/hardware.h>

arch/arm/oprofile/common.c

@@ -131,6 +131,8 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
 	struct op_arm_model_spec *spec = NULL;
 	int ret = -ENODEV;
 
+	ops->backtrace = arm_backtrace;
+
 #ifdef CONFIG_CPU_XSCALE
 	spec = &op_xscale_spec;
 #endif
@@ -161,7 +163,6 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
 		ops->start = op_arm_start;
 		ops->stop = op_arm_stop;
 		ops->cpu_type = op_arm_model->name;
-		ops->backtrace = arm_backtrace;
 		printk(KERN_INFO "oprofile: using %s\n", spec->name);
 	}
 

arch/arm/plat-omap/dma.c

@@ -557,7 +557,7 @@ int omap_request_dma(int dev_id, const char *dev_name,
 		omap_enable_channel_irq(free_ch);
 		/* Clear the CSR register and IRQ status register */
 		OMAP_DMA_CSR_REG(free_ch) = OMAP2_DMA_CSR_CLEAR_MASK;
-		omap_writel(~0x0, OMAP_DMA4_IRQSTATUS_L0);
+		omap_writel(1 << free_ch, OMAP_DMA4_IRQSTATUS_L0);
 	}
 
 	*dma_ch_out = free_ch;
@@ -597,10 +597,7 @@ void omap_free_dma(int lch)
 
 		/* Clear the CSR register and IRQ status register */
 		OMAP_DMA_CSR_REG(lch) = OMAP2_DMA_CSR_CLEAR_MASK;
-
-		val = omap_readl(OMAP_DMA4_IRQSTATUS_L0);
-		val |= 1 << lch;
-		omap_writel(val, OMAP_DMA4_IRQSTATUS_L0);
+		omap_writel(1 << lch, OMAP_DMA4_IRQSTATUS_L0);
 
 		/* Disable all DMA interrupts for the channel. */
 		OMAP_DMA_CICR_REG(lch) = 0;
@@ -927,7 +924,6 @@ static irqreturn_t omap1_dma_irq_handler(int irq, void *dev_id)
 static int omap2_dma_handle_ch(int ch)
 {
 	u32 status = OMAP_DMA_CSR_REG(ch);
-	u32 val;
 
 	if (!status)
 		return 0;
@@ -948,11 +944,7 @@ static int omap2_dma_handle_ch(int ch)
 		       dma_chan[ch].dev_id);
 
 	OMAP_DMA_CSR_REG(ch) = OMAP2_DMA_CSR_CLEAR_MASK;
-
-	val = omap_readl(OMAP_DMA4_IRQSTATUS_L0);
-	/* ch in this function is from 0-31 while in register it is 1-32 */
-	val = 1 << (ch);
-	omap_writel(val, OMAP_DMA4_IRQSTATUS_L0);
+	omap_writel(1 << ch, OMAP_DMA4_IRQSTATUS_L0);
 
 	if (likely(dma_chan[ch].callback != NULL))
 		dma_chan[ch].callback(ch, status, dma_chan[ch].data);

arch/arm/plat-omap/dmtimer.c

@@ -90,8 +90,8 @@ static struct omap_dm_timer dm_timers[] = {
 	{ .phys_base = 0xfffb2c00, .irq = INT_1610_GPTIMER4 },
 	{ .phys_base = 0xfffb3400, .irq = INT_1610_GPTIMER5 },
 	{ .phys_base = 0xfffb3c00, .irq = INT_1610_GPTIMER6 },
-	{ .phys_base = 0xfffb4400, .irq = INT_1610_GPTIMER7 },
-	{ .phys_base = 0xfffb4c00, .irq = INT_1610_GPTIMER8 },
+	{ .phys_base = 0xfffb7400, .irq = INT_1610_GPTIMER7 },
+	{ .phys_base = 0xfffbd400, .irq = INT_1610_GPTIMER8 },
 };
 
 #elif defined(CONFIG_ARCH_OMAP2)
@@ -314,6 +314,8 @@ struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer)
 __u32 omap_dm_timer_modify_idlect_mask(__u32 inputmask)
 {
 	BUG();
+
+	return 0;
 }
 
 #endif

arch/arm/plat-omap/gpio.c

@@ -974,10 +974,11 @@ static struct irq_chip gpio_irq_chip = {
 };
 
 static struct irq_chip mpuio_irq_chip = {
-	.name	= "MPUIO",
-	.ack	= mpuio_ack_irq,
-	.mask	= mpuio_mask_irq,
-	.unmask	= mpuio_unmask_irq
+	.name	  = "MPUIO",
+	.ack	  = mpuio_ack_irq,
+	.mask	  = mpuio_mask_irq,
+	.unmask	  = mpuio_unmask_irq,
+	.set_type = gpio_irq_type,
 };
 
 static int initialized;

arch/arm/plat-omap/mcbsp.c

@@ -20,8 +20,8 @@
 #include <linux/interrupt.h>
 #include <linux/err.h>
 #include <linux/clk.h>
+#include <linux/delay.h>
 
-#include <asm/delay.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 

arch/arm/plat-omap/mux.c

@@ -116,7 +116,7 @@ int __init_or_module omap_cfg_reg(const unsigned long index)
 	}
 
 	/* Check for pull up or pull down selection on 1610 */
-	if (!cpu_is_omap1510()) {
+	if (!cpu_is_omap15xx()) {
 		if (cfg->pu_pd_reg && cfg->pull_val) {
 			spin_lock_irqsave(&mux_spin_lock, flags);
 			pu_pd_orig = omap_readl(cfg->pu_pd_reg);
@@ -172,7 +172,7 @@ int __init_or_module omap_cfg_reg(const unsigned long index)
 		printk("      %s (0x%08x) = 0x%08x -> 0x%08x\n",
 		       cfg->mux_reg_name, cfg->mux_reg, reg_orig, reg);
 
-		if (!cpu_is_omap1510()) {
+		if (!cpu_is_omap15xx()) {
 			if (cfg->pu_pd_reg && cfg->pull_val) {
 				printk("      %s (0x%08x) = 0x%08x -> 0x%08x\n",
 				       cfg->pu_pd_name, cfg->pu_pd_reg,

arch/arm/plat-s3c24xx/Kconfig

@@ -58,6 +58,11 @@ config S3C2410_PM_CHECK
 	  going to sleep. The blocks are then checked on resume for any
 	  errors.
 
+	  Note, this can take several seconds depending on memory size
+	  and CPU speed.
+
+	  See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
+
 config S3C2410_PM_CHECK_CHUNKSIZE
 	int "S3C2410 PM Suspend CRC Chunksize (KiB)"
 	depends on ARCH_S3C2410 && PM && S3C2410_PM_CHECK
@@ -68,6 +73,8 @@ config S3C2410_PM_CHECK_CHUNKSIZE
 	  the CRC data block will take more memory, but wil identify any
 	  faults with better precision.
 
+	  See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
+
 config S3C2410_LOWLEVEL_UART_PORT
 	int "S3C2410 UART to use for low-level messages"
 	default 0

drivers/acorn/char/Makefile

@@ -2,5 +2,4 @@
 # Makefile for the acorn character device drivers.
 #
 
-obj-$(CONFIG_ARCH_ACORN)	+= i2c.o pcf8583.o
 obj-$(CONFIG_L7200_KEYB)	+= defkeymap-l7200.o keyb_l7200.o

drivers/acorn/char/i2c.c

-/*
- *  linux/drivers/acorn/char/i2c.c
- *
- *  Copyright (C) 2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  ARM IOC/IOMD i2c driver.
- *
- *  On Acorn machines, the following i2c devices are on the bus:
- *	- PCF8583 real time clock & static RAM
- */
-#include <linux/capability.h>
-#include <linux/init.h>
-#include <linux/time.h>
-#include <linux/miscdevice.h>
-#include <linux/rtc.h>
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-#include <linux/fs.h>
-
-#include <asm/hardware.h>
-#include <asm/io.h>
-#include <asm/hardware/ioc.h>
-#include <asm/system.h>
-#include <asm/uaccess.h>
-
-#include "pcf8583.h"
-
-extern int (*set_rtc)(void);
-
-static struct i2c_client *rtc_client;
-static const unsigned char days_in_mon[] = 
-	{ 0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
-
-#define CMOS_CHECKSUM	(63)
-
-/*
- * Acorn machines store the year in the static RAM at
- * location 128.
- */
-#define CMOS_YEAR	(64 + 128)
-
-static inline int rtc_command(int cmd, void *data)
-{
-	int ret = -EIO;
-
-	if (rtc_client)
-		ret = rtc_client->driver->command(rtc_client, cmd, data);
-
-	return ret;
-}
-
-/*
- * Update the century + year bytes in the CMOS RAM, ensuring
- * that the check byte is correctly adjusted for the change.
- */
-static int rtc_update_year(unsigned int new_year)
-{
-	unsigned char yr[2], chk;
-	struct mem cmos_year  = { CMOS_YEAR, sizeof(yr), yr };
-	struct mem cmos_check = { CMOS_CHECKSUM, 1, &chk };
-	int ret;
-
-	ret = rtc_command(MEM_READ, &cmos_check);
-	if (ret)
-		goto out;
-	ret = rtc_command(MEM_READ, &cmos_year);
-	if (ret)
-		goto out;
-
-	chk -= yr[1] + yr[0];
-
-	yr[1] = new_year / 100;
-	yr[0] = new_year % 100;
-
-	chk += yr[1] + yr[0];
-
-	ret = rtc_command(MEM_WRITE, &cmos_year);
-	if (ret == 0)
-		ret = rtc_command(MEM_WRITE, &cmos_check);
- out:
-	return ret;
-}
-
-/*
- * Read the current RTC time and date, and update xtime.
- */
-static void get_rtc_time(struct rtc_tm *rtctm, unsigned int *year)
-{
-	unsigned char ctrl, yr[2];
-	struct mem rtcmem = { CMOS_YEAR, sizeof(yr), yr };
-	int real_year, year_offset;
-
-	/*
-	 * Ensure that the RTC is running.
-	 */
-	rtc_command(RTC_GETCTRL, &ctrl);
-	if (ctrl & 0xc0) {
-		unsigned char new_ctrl = ctrl & ~0xc0;
-
-		printk(KERN_WARNING "RTC: resetting control %02x -> %02x\n",
-		       ctrl, new_ctrl);
-
-		rtc_command(RTC_SETCTRL, &new_ctrl);
-	}
-
-	if (rtc_command(RTC_GETDATETIME, rtctm) ||
-	    rtc_command(MEM_READ, &rtcmem))
-		return;
-
-	real_year = yr[0];
-
-	/*
-	 * The RTC year holds the LSB two bits of the current
-	 * year, which should reflect the LSB two bits of the
-	 * CMOS copy of the year.  Any difference indicates
-	 * that we have to correct the CMOS version.
-	 */
-	year_offset = rtctm->year_off - (real_year & 3);
-	if (year_offset < 0)
-		/*
-		 * RTC year wrapped.  Adjust it appropriately.
-		 */
-		year_offset += 4;
-
-	*year = real_year + year_offset + yr[1] * 100;
-}
-
-static int set_rtc_time(struct rtc_tm *rtctm, unsigned int year)
-{
-	unsigned char leap;
-	int ret;
-
-	leap = (!(year % 4) && (year % 100)) || !(year % 400);
-
-	if (rtctm->mon > 12 || rtctm->mon == 0 || rtctm->mday == 0)
-		return -EINVAL;
-
-	if (rtctm->mday > (days_in_mon[rtctm->mon] + (rtctm->mon == 2 && leap)))
-		return -EINVAL;
-
-	if (rtctm->hours >= 24 || rtctm->mins >= 60 || rtctm->secs >= 60)
-		return -EINVAL;
-
-	/*
-	 * The RTC's own 2-bit year must reflect the least
-	 * significant two bits of the CMOS year.
-	 */
-	rtctm->year_off = (year % 100) & 3;
-
-	ret = rtc_command(RTC_SETDATETIME, rtctm);
-	if (ret == 0)
-		ret = rtc_update_year(year);
-
-	return ret;
-}
-
-/*
- * Set the RTC time only.  Note that
- * we do not touch the date.
- */
-static int k_set_rtc_time(void)
-{
-	struct rtc_tm new_rtctm, old_rtctm;
-	unsigned long nowtime = xtime.tv_sec;
-
-	if (rtc_command(RTC_GETDATETIME, &old_rtctm))
-		return 0;
-
-	new_rtctm.cs    = xtime.tv_nsec / 10000000;
-	new_rtctm.secs  = nowtime % 60;	nowtime /= 60;
-	new_rtctm.mins  = nowtime % 60;	nowtime /= 60;
-	new_rtctm.hours = nowtime % 24;
-
-	/*
-	 * avoid writing when we're going to change the day
-	 * of the month.  We will retry in the next minute.
-	 * This basically means that if the RTC must not drift
-	 * by more than 1 minute in 11 minutes.
-	 *
-	 * [ rtc: 1/1/2000 23:58:00, real 2/1/2000 00:01:00,
-	 *   rtc gets set to 1/1/2000 00:01:00 ]
-	 */
-	if ((old_rtctm.hours == 23 && old_rtctm.mins == 59) ||
-	    (new_rtctm.hours == 23 && new_rtctm.mins == 59))
-		return 1;
-
-	return rtc_command(RTC_SETTIME, &new_rtctm);
-}
-
-static int rtc_ioctl(struct inode *inode, struct file *file,
-		     unsigned int cmd, unsigned long arg)
-{
-	unsigned int year;
-	struct rtc_time rtctm;
-	struct rtc_tm rtc_raw;
-
-	switch (cmd) {
-	case RTC_ALM_READ:
-	case RTC_ALM_SET:
-		break;
-
-	case RTC_RD_TIME:
-		memset(&rtctm, 0, sizeof(struct rtc_time));
-		get_rtc_time(&rtc_raw, &year);
-		rtctm.tm_sec  = rtc_raw.secs;
-		rtctm.tm_min  = rtc_raw.mins;
-		rtctm.tm_hour = rtc_raw.hours;
-		rtctm.tm_mday = rtc_raw.mday;
-		rtctm.tm_mon  = rtc_raw.mon - 1; /* month starts at 0 */
-		rtctm.tm_year = year - 1900; /* starts at 1900 */
-		return copy_to_user((void *)arg, &rtctm, sizeof(rtctm))
-				 ? -EFAULT : 0;
-
-	case RTC_SET_TIME:
-		if (!capable(CAP_SYS_TIME))
-			return -EACCES;
-
-		if (copy_from_user(&rtctm, (void *)arg, sizeof(rtctm)))
-			return -EFAULT;
-		rtc_raw.secs     = rtctm.tm_sec;
-		rtc_raw.mins     = rtctm.tm_min;
-		rtc_raw.hours    = rtctm.tm_hour;
-		rtc_raw.mday     = rtctm.tm_mday;
-		rtc_raw.mon      = rtctm.tm_mon + 1;
-		year             = rtctm.tm_year + 1900;
-		return set_rtc_time(&rtc_raw, year);
-		break;
-
-	case RTC_EPOCH_READ:
-		return put_user(1900, (unsigned long *)arg);
-
-	}
-	return -EINVAL;
-}
-
-static const struct file_operations rtc_fops = {
-	.ioctl	= rtc_ioctl,
-};
-
-static struct miscdevice rtc_dev = {
-	.minor	= RTC_MINOR,
-	.name	= "rtc",
-	.fops	= &rtc_fops,
-};
-
-/* IOC / IOMD i2c driver */
-
-#define FORCE_ONES	0xdc
-#define SCL		0x02
-#define SDA		0x01
-
-/*
- * We must preserve all non-i2c output bits in IOC_CONTROL.
- * Note also that we need to preserve the value of SCL and
- * SDA outputs as well (which may be different from the
- * values read back from IOC_CONTROL).
- */
-static u_int force_ones;
-
-static void ioc_setscl(void *data, int state)
-{
-	u_int ioc_control = ioc_readb(IOC_CONTROL) & ~(SCL | SDA);
-	u_int ones = force_ones;
-
-	if (state)
-		ones |= SCL;
-	else
-		ones &= ~SCL;
-
-	force_ones = ones;
-
- 	ioc_writeb(ioc_control | ones, IOC_CONTROL);
-}
-
-static void ioc_setsda(void *data, int state)
-{
-	u_int ioc_control = ioc_readb(IOC_CONTROL) & ~(SCL | SDA);
-	u_int ones = force_ones;
-
-	if (state)
-		ones |= SDA;
-	else
-		ones &= ~SDA;
-
-	force_ones = ones;
-
- 	ioc_writeb(ioc_control | ones, IOC_CONTROL);
-}
-
-static int ioc_getscl(void *data)
-{
-	return (ioc_readb(IOC_CONTROL) & SCL) != 0;
-}
-
-static int ioc_getsda(void *data)
-{
-	return (ioc_readb(IOC_CONTROL) & SDA) != 0;
-}
-
-static struct i2c_algo_bit_data ioc_data = {
-	.setsda		= ioc_setsda,
-	.setscl		= ioc_setscl,
-	.getsda		= ioc_getsda,
-	.getscl		= ioc_getscl,
-	.udelay		= 80,
-	.timeout	= 100
-};
-
-static int ioc_client_reg(struct i2c_client *client)
-{
-	if (client->driver->id == I2C_DRIVERID_PCF8583 &&
-	    client->addr == 0x50) {
-		struct rtc_tm rtctm;
-		unsigned int year;
-		struct timespec tv;
-
-		rtc_client = client;
-		get_rtc_time(&rtctm, &year);
-
-		tv.tv_nsec = rtctm.cs * 10000000;
-		tv.tv_sec  = mktime(year, rtctm.mon, rtctm.mday,
-				    rtctm.hours, rtctm.mins, rtctm.secs);
-		do_settimeofday(&tv);
-		set_rtc = k_set_rtc_time;
-	}
-
-	return 0;
-}
-
-static int ioc_client_unreg(struct i2c_client *client)
-{
-	if (client == rtc_client) {
-		set_rtc = NULL;
-		rtc_client = NULL;
-	}
-
-	return 0;
-}
-
-static struct i2c_adapter ioc_ops = {
-	.id			= I2C_HW_B_IOC,
-	.algo_data		= &ioc_data,
-	.client_register	= ioc_client_reg,
-	.client_unregister	= ioc_client_unreg,
-};
-
-static int __init i2c_ioc_init(void)
-{
-	int ret;
-
-	force_ones = FORCE_ONES | SCL | SDA;
-
-	ret = i2c_bit_add_bus(&ioc_ops);
-
-	if (ret >= 0){
-		ret = misc_register(&rtc_dev);
-		if(ret < 0)
-			i2c_del_adapter(&ioc_ops);
-	}
-
-	return ret;
-}
-
-__initcall(i2c_ioc_init);

drivers/acorn/char/pcf8583.c

-/*
- *  linux/drivers/acorn/char/pcf8583.c
- *
- *  Copyright (C) 2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- *  Driver for PCF8583 RTC & RAM chip
- */
-#include <linux/module.h>
-#include <linux/i2c.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/mc146818rtc.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/bcd.h>
-
-#include "pcf8583.h"
-
-static struct i2c_driver pcf8583_driver;
-
-static unsigned short ignore[] = { I2C_CLIENT_END };
-static unsigned short normal_addr[] = { 0x50, I2C_CLIENT_END };
-static unsigned short *forces[] = { NULL };
-
-static struct i2c_client_address_data addr_data = {
-	.normal_i2c		= normal_addr,
-	.probe			= ignore,
-	.ignore			= ignore,
-	.forces			= forces,
-};
-
-#define set_ctrl(x, v) i2c_set_clientdata(x, (void *)(unsigned int)(v))
-#define get_ctrl(x)    ((unsigned int)i2c_get_clientdata(x))
-
-static int
-pcf8583_attach(struct i2c_adapter *adap, int addr, int kind)
-{
-	struct i2c_client *c;
-	unsigned char buf[1], ad[1] = { 0 };
-	struct i2c_msg msgs[2] = {
-		{
-			.addr = addr,
-			.flags = 0,
-			.len = 1,
-			.buf = ad,
-		}, {
-			.addr = addr,
-			.flags = I2C_M_RD,
-			.len = 1,
-			.buf = buf,
-		}
-	};
-
-	c = kmalloc(sizeof(*c), GFP_KERNEL);
-	if (!c)
-		return -ENOMEM;
-
-	memset(c, 0, sizeof(*c));
-	c->addr		= addr;
-	c->adapter	= adap;
-	c->driver	= &pcf8583_driver;
-
-	if (i2c_transfer(c->adapter, msgs, 2) == 2)
-		set_ctrl(c, buf[0]);
-
-	return i2c_attach_client(c);
-}
-
-static int
-pcf8583_probe(struct i2c_adapter *adap)
-{
-	return i2c_probe(adap, &addr_data, pcf8583_attach);
-}
-
-static int
-pcf8583_detach(struct i2c_client *client)
-{
-	i2c_detach_client(client);
-	kfree(client);
-	return 0;
-}
-
-static int
-pcf8583_get_datetime(struct i2c_client *client, struct rtc_tm *dt)
-{
-	unsigned char buf[8], addr[1] = { 1 };
-	struct i2c_msg msgs[2] = {
-		{
-			.addr = client->addr,
-			.flags = 0,
-			.len = 1,
-			.buf = addr,
-		}, {
-			.addr = client->addr,
-			.flags = I2C_M_RD,
-			.len = 6,
-			.buf = buf,
-		}
-	};
-	int ret = -EIO;
-
-	memset(buf, 0, sizeof(buf));
-
-	ret = i2c_transfer(client->adapter, msgs, 2);
-	if (ret == 2) {
-		dt->year_off = buf[4] >> 6;
-		dt->wday     = buf[5] >> 5;
-
-		buf[4] &= 0x3f;
-		buf[5] &= 0x1f;
-
-		dt->cs       = BCD_TO_BIN(buf[0]);
-		dt->secs     = BCD_TO_BIN(buf[1]);
-		dt->mins     = BCD_TO_BIN(buf[2]);
-		dt->hours    = BCD_TO_BIN(buf[3]);
-		dt->mday     = BCD_TO_BIN(buf[4]);
-		dt->mon      = BCD_TO_BIN(buf[5]);
-
-		ret = 0;
-	}
-
-	return ret;
-}
-
-static int
-pcf8583_set_datetime(struct i2c_client *client, struct rtc_tm *dt, int datetoo)
-{
-	unsigned char buf[8];
-	int ret, len = 6;
-
-	buf[0] = 0;
-	buf[1] = get_ctrl(client) | 0x80;
-	buf[2] = BIN_TO_BCD(dt->cs);
-	buf[3] = BIN_TO_BCD(dt->secs);
-	buf[4] = BIN_TO_BCD(dt->mins);
-	buf[5] = BIN_TO_BCD(dt->hours);
-
-	if (datetoo) {
-		len = 8;
-		buf[6] = BIN_TO_BCD(dt->mday) | (dt->year_off << 6);
-		buf[7] = BIN_TO_BCD(dt->mon)  | (dt->wday << 5);
-	}
-
-	ret = i2c_master_send(client, (char *)buf, len);
-	if (ret == len)
-		ret = 0;
-
-	buf[1] = get_ctrl(client);
-	i2c_master_send(client, (char *)buf, 2);
-
-	return ret;
-}
-
-static int
-pcf8583_get_ctrl(struct i2c_client *client, unsigned char *ctrl)
-{
-	*ctrl = get_ctrl(client);
-	return 0;
-}
-
-static int
-pcf8583_set_ctrl(struct i2c_client *client, unsigned char *ctrl)
-{
-	unsigned char buf[2];
-
-	buf[0] = 0;
-	buf[1] = *ctrl;
-	set_ctrl(client, *ctrl);
-
-	return i2c_master_send(client, (char *)buf, 2);
-}
-
-static int
-pcf8583_read_mem(struct i2c_client *client, struct mem *mem)
-{
-	unsigned char addr[1];
-	struct i2c_msg msgs[2] = {
-		{
-			.addr = client->addr,
-			.flags = 0,
-			.len = 1,
-			.buf = addr,
-		}, {
-			.addr = client->addr,
-			.flags = I2C_M_RD,
-			.len = mem->nr,
-			.buf = mem->data,
-		}
-	};
-
-	if (mem->loc < 8)
-		return -EINVAL;
-
-	addr[0] = mem->loc;
-
-	return i2c_transfer(client->adapter, msgs, 2) == 2 ? 0 : -EIO;
-}
-
-static int
-pcf8583_write_mem(struct i2c_client *client, struct mem *mem)
-{
-	unsigned char addr[1];
-	struct i2c_msg msgs[2] = {
-		{
-			.addr = client->addr,
-			.flags = 0,
-			.len = 1,
-			.buf = addr,
-		}, {
-			.addr = client->addr,
-			.flags = I2C_M_NOSTART,
-			.len = mem->nr,
-			.buf = mem->data,
-		}
-	};
-
-	if (mem->loc < 8)
-		return -EINVAL;
-
-	addr[0] = mem->loc;
-
-	return i2c_transfer(client->adapter, msgs, 2) == 2 ? 0 : -EIO;
-}
-
-static int
-pcf8583_command(struct i2c_client *client, unsigned int cmd, void *arg)
-{
-	switch (cmd) {
-	case RTC_GETDATETIME:
-		return pcf8583_get_datetime(client, arg);
-		
-	case RTC_SETTIME:
-		return pcf8583_set_datetime(client, arg, 0);
-
-	case RTC_SETDATETIME:
-		return pcf8583_set_datetime(client, arg, 1);
-
-	case RTC_GETCTRL:
-		return pcf8583_get_ctrl(client, arg);
-
-	case RTC_SETCTRL:
-		return pcf8583_set_ctrl(client, arg);
-
-	case MEM_READ:
-		return pcf8583_read_mem(client, arg);
-
-	case MEM_WRITE:
-		return pcf8583_write_mem(client, arg);
-
-	default:
-		return -EINVAL;
-	}
-}
-
-static struct i2c_driver pcf8583_driver = {
-	.driver = {
-		.name	= "PCF8583",
-	},
-	.id		= I2C_DRIVERID_PCF8583,
-	.attach_adapter	= pcf8583_probe,
-	.detach_client	= pcf8583_detach,
-	.command	= pcf8583_command
-};
-
-static __init int pcf8583_init(void)
-{
-	return i2c_add_driver(&pcf8583_driver);
-}
-
-static __exit void pcf8583_exit(void)
-{
-	i2c_del_driver(&pcf8583_driver);
-}
-
-module_init(pcf8583_init);
-module_exit(pcf8583_exit);
-
-MODULE_AUTHOR("Russell King");
-MODULE_DESCRIPTION("PCF8583 I2C RTC driver");
-MODULE_LICENSE("GPL");

drivers/acorn/char/pcf8583.h

-/*
- *  linux/drivers/acorn/char/pcf8583.h
- *
- *  Copyright (C) 2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-struct rtc_tm {
-	unsigned char	cs;
-	unsigned char	secs;
-	unsigned char	mins;
-	unsigned char	hours;
-	unsigned char	mday;
-	unsigned char	mon;
-	unsigned char	year_off;
-	unsigned char	wday;
-};
-
-struct mem {
-	unsigned int	loc;
-	unsigned int	nr;
-	unsigned char	*data;
-};
-
-#define RTC_GETDATETIME	0
-#define RTC_SETTIME	1
-#define RTC_SETDATETIME	2
-#define RTC_GETCTRL	3
-#define RTC_SETCTRL	4
-#define MEM_READ	5
-#define MEM_WRITE	6
-
-#define CTRL_STOP	0x80
-#define CTRL_HOLD	0x40
-#define CTRL_32KHZ	0x00
-#define CTRL_MASK	0x08
-#define CTRL_ALARMEN	0x04
-#define CTRL_ALARM	0x02
-#define CTRL_TIMER	0x01

drivers/i2c/busses/Kconfig

@@ -495,6 +495,16 @@ config I2C_VERSATILE
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-versatile.
 
+config I2C_ACORN
+	bool "Acorn IOC/IOMD I2C bus support"
+	depends on I2C && ARCH_ACORN
+	default y
+	select I2C_ALGOBIT
+	help
+	  Say yes if you want to support the I2C bus on Acorn platforms.
+
+	  If you don't know, say Y.
+
 config I2C_VIA
 	tristate "VIA 82C586B"
 	depends on I2C && PCI && EXPERIMENTAL

drivers/i2c/busses/Makefile

@@ -42,6 +42,7 @@ obj-$(CONFIG_I2C_SIS630)	+= i2c-sis630.o
 obj-$(CONFIG_I2C_SIS96X)	+= i2c-sis96x.o
 obj-$(CONFIG_I2C_STUB)		+= i2c-stub.o
 obj-$(CONFIG_I2C_VERSATILE)	+= i2c-versatile.o
+obj-$(CONFIG_I2C_ACORN)		+= i2c-acorn.o
 obj-$(CONFIG_I2C_VIA)		+= i2c-via.o
 obj-$(CONFIG_I2C_VIAPRO)	+= i2c-viapro.o
 obj-$(CONFIG_I2C_VOODOO3)	+= i2c-voodoo3.o

drivers/i2c/busses/i2c-acorn.c

+/*
+ *  linux/drivers/acorn/char/i2c.c
+ *
+ *  Copyright (C) 2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  ARM IOC/IOMD i2c driver.
+ *
+ *  On Acorn machines, the following i2c devices are on the bus:
+ *	- PCF8583 real time clock & static RAM
+ */
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/hardware/ioc.h>
+#include <asm/system.h>
+
+#define FORCE_ONES	0xdc
+#define SCL		0x02
+#define SDA		0x01
+
+/*
+ * We must preserve all non-i2c output bits in IOC_CONTROL.
+ * Note also that we need to preserve the value of SCL and
+ * SDA outputs as well (which may be different from the
+ * values read back from IOC_CONTROL).
+ */
+static u_int force_ones;
+
+static void ioc_setscl(void *data, int state)
+{
+	u_int ioc_control = ioc_readb(IOC_CONTROL) & ~(SCL | SDA);
+	u_int ones = force_ones;
+
+	if (state)
+		ones |= SCL;
+	else
+		ones &= ~SCL;
+
+	force_ones = ones;
+
+ 	ioc_writeb(ioc_control | ones, IOC_CONTROL);
+}
+
+static void ioc_setsda(void *data, int state)
+{
+	u_int ioc_control = ioc_readb(IOC_CONTROL) & ~(SCL | SDA);
+	u_int ones = force_ones;
+
+	if (state)
+		ones |= SDA;
+	else
+		ones &= ~SDA;
+
+	force_ones = ones;
+
+ 	ioc_writeb(ioc_control | ones, IOC_CONTROL);
+}
+
+static int ioc_getscl(void *data)
+{
+	return (ioc_readb(IOC_CONTROL) & SCL) != 0;
+}
+
+static int ioc_getsda(void *data)
+{
+	return (ioc_readb(IOC_CONTROL) & SDA) != 0;
+}
+
+static struct i2c_algo_bit_data ioc_data = {
+	.setsda		= ioc_setsda,
+	.setscl		= ioc_setscl,
+	.getsda		= ioc_getsda,
+	.getscl		= ioc_getscl,
+	.udelay		= 80,
+	.timeout	= 100
+};
+
+static struct i2c_adapter ioc_ops = {
+	.id			= I2C_HW_B_IOC,
+	.algo_data		= &ioc_data,
+};
+
+static int __init i2c_ioc_init(void)
+{
+	force_ones = FORCE_ONES | SCL | SDA;
+
+	return i2c_bit_add_bus(&ioc_ops);
+}
+
+__initcall(i2c_ioc_init);

drivers/rtc/Kconfig

@@ -207,10 +207,12 @@ config RTC_DRV_PCF8563
 
 config RTC_DRV_PCF8583
 	tristate "Philips PCF8583"
-	depends on RTC_CLASS && I2C
+	depends on RTC_CLASS && I2C && ARCH_RPC
 	help
-	  If you say yes here you get support for the
-	  Philips PCF8583 RTC chip.
+	  If you say yes here you get support for the Philips PCF8583
+	  RTC chip found on Acorn RiscPCs.  This driver supports the
+	  platform specific method of retrieving the current year from
+	  the RTC's SRAM.
 
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-pcf8583.

drivers/rtc/rtc-pcf8583.c

@@ -40,7 +40,7 @@ struct pcf8583 {
 #define CTRL_ALARM	0x02
 #define CTRL_TIMER	0x01
 
-static unsigned short normal_i2c[] = { I2C_CLIENT_END };
+static unsigned short normal_i2c[] = { 0x50, I2C_CLIENT_END };
 
 /* Module parameters */
 I2C_CLIENT_INSMOD;
@@ -81,11 +81,11 @@ static int pcf8583_get_datetime(struct i2c_client *client, struct rtc_time *dt)
 		buf[4] &= 0x3f;
 		buf[5] &= 0x1f;
 
-		dt->tm_sec = BCD_TO_BIN(buf[1]);
-		dt->tm_min = BCD_TO_BIN(buf[2]);
-		dt->tm_hour = BCD_TO_BIN(buf[3]);
-		dt->tm_mday = BCD_TO_BIN(buf[4]);
-		dt->tm_mon = BCD_TO_BIN(buf[5]);
+		dt->tm_sec = BCD2BIN(buf[1]);
+		dt->tm_min = BCD2BIN(buf[2]);
+		dt->tm_hour = BCD2BIN(buf[3]);
+		dt->tm_mday = BCD2BIN(buf[4]);
+		dt->tm_mon = BCD2BIN(buf[5]) - 1;
 	}
 
 	return ret == 2 ? 0 : -EIO;
@@ -99,14 +99,14 @@ static int pcf8583_set_datetime(struct i2c_client *client, struct rtc_time *dt,
 	buf[0] = 0;
 	buf[1] = get_ctrl(client) | 0x80;
 	buf[2] = 0;
-	buf[3] = BIN_TO_BCD(dt->tm_sec);
-	buf[4] = BIN_TO_BCD(dt->tm_min);
-	buf[5] = BIN_TO_BCD(dt->tm_hour);
+	buf[3] = BIN2BCD(dt->tm_sec);
+	buf[4] = BIN2BCD(dt->tm_min);
+	buf[5] = BIN2BCD(dt->tm_hour);
 
 	if (datetoo) {
 		len = 8;
-		buf[6] = BIN_TO_BCD(dt->tm_mday) | (dt->tm_year << 6);
-		buf[7] = BIN_TO_BCD(dt->tm_mon)  | (dt->tm_wday << 5);
+		buf[6] = BIN2BCD(dt->tm_mday) | (dt->tm_year << 6);
+		buf[7] = BIN2BCD(dt->tm_mon + 1)  | (dt->tm_wday << 5);
 	}
 
 	ret = i2c_master_send(client, (char *)buf, len);
@@ -226,7 +226,7 @@ static int pcf8583_rtc_read_time(struct device *dev, struct rtc_time *tm)
 		 */
 		year_offset += 4;
 
-	tm->tm_year = real_year + year_offset + year[1] * 100;
+	tm->tm_year = (real_year + year_offset + year[1] * 100) - 1900;
 
 	return 0;
 }
@@ -237,6 +237,7 @@ static int pcf8583_rtc_set_time(struct device *dev, struct rtc_time *tm)
 	unsigned char year[2], chk;
 	struct rtc_mem cmos_year  = { CMOS_YEAR, sizeof(year), year };
 	struct rtc_mem cmos_check = { CMOS_CHECKSUM, 1, &chk };
+	unsigned int proper_year = tm->tm_year + 1900;
 	int ret;
 
 	/*
@@ -258,8 +259,8 @@ static int pcf8583_rtc_set_time(struct device *dev, struct rtc_time *tm)
 
 	chk -= year[1] + year[0];
 
-	year[1] = tm->tm_year / 100;
-	year[0] = tm->tm_year % 100;
+	year[1] = proper_year / 100;
+	year[0] = proper_year % 100;
 
 	chk += year[1] + year[0];
 

drivers/scsi/arm/cumana_2.c

@@ -178,10 +178,10 @@ cumanascsi_2_dma_setup(struct Scsi_Host *host, struct scsi_pointer *SCp,
 			dma_dir = DMA_MODE_READ,
 			alatch_dir = ALATCH_DMA_IN;
 
-		dma_map_sg(dev, info->sg, bufs + 1, map_dir);
+		dma_map_sg(dev, info->sg, bufs, map_dir);
 
 		disable_dma(dmach);
-		set_dma_sg(dmach, info->sg, bufs + 1);
+		set_dma_sg(dmach, info->sg, bufs);
 		writeb(alatch_dir, info->base + CUMANASCSI2_ALATCH);
 		set_dma_mode(dmach, dma_dir);
 		enable_dma(dmach);

drivers/scsi/arm/eesox.c

@@ -175,10 +175,10 @@ eesoxscsi_dma_setup(struct Scsi_Host *host, struct scsi_pointer *SCp,
 			map_dir = DMA_FROM_DEVICE,
 			dma_dir = DMA_MODE_READ;
 
-		dma_map_sg(dev, info->sg, bufs + 1, map_dir);
+		dma_map_sg(dev, info->sg, bufs, map_dir);
 
 		disable_dma(dmach);
-		set_dma_sg(dmach, info->sg, bufs + 1);
+		set_dma_sg(dmach, info->sg, bufs);
 		set_dma_mode(dmach, dma_dir);
 		enable_dma(dmach);
 		return fasdma_real_all;

drivers/scsi/arm/fas216.c

@@ -633,7 +633,7 @@ static void fas216_updateptrs(FAS216_Info *info, int bytes_transferred)
 
 	BUG_ON(bytes_transferred < 0);
 
-	info->SCpnt->request_bufflen -= bytes_transferred;
+	SCp->phase -= bytes_transferred;
 
 	while (bytes_transferred != 0) {
 		if (SCp->this_residual > bytes_transferred)
@@ -715,7 +715,7 @@ static void fas216_cleanuptransfer(FAS216_Info *info)
 		return;
 
 	if (dmatype == fasdma_real_all)
-		total = info->SCpnt->request_bufflen;
+		total = info->scsi.SCp.phase;
 	else
 		total = info->scsi.SCp.this_residual;
 
@@ -753,7 +753,7 @@ static void fas216_transfer(FAS216_Info *info)
 	fas216_log(info, LOG_BUFFER,
 		   "starttransfer: buffer %p length 0x%06x reqlen 0x%06x",
 		   info->scsi.SCp.ptr, info->scsi.SCp.this_residual,
-		   info->SCpnt->request_bufflen);
+		   info->scsi.SCp.phase);
 
 	if (!info->scsi.SCp.ptr) {
 		fas216_log(info, LOG_ERROR, "null buffer passed to "
@@ -784,7 +784,7 @@ static void fas216_transfer(FAS216_Info *info)
 	info->dma.transfer_type = dmatype;
 
 	if (dmatype == fasdma_real_all)
-		fas216_set_stc(info, info->SCpnt->request_bufflen);
+		fas216_set_stc(info, info->scsi.SCp.phase);
 	else
 		fas216_set_stc(info, info->scsi.SCp.this_residual);
 
@@ -2114,6 +2114,7 @@ fas216_std_done(FAS216_Info *info, struct scsi_cmnd *SCpnt, unsigned int result)
 	SCpnt->SCp.buffers_residual = 0;
 	SCpnt->SCp.ptr = (char *)SCpnt->sense_buffer;
 	SCpnt->SCp.this_residual = sizeof(SCpnt->sense_buffer);
+	SCpnt->SCp.phase = sizeof(SCpnt->sense_buffer);
 	SCpnt->SCp.Message = 0;
 	SCpnt->SCp.Status = 0;
 	SCpnt->request_bufflen = sizeof(SCpnt->sense_buffer);

drivers/scsi/arm/powertec.c

@@ -148,10 +148,10 @@ powertecscsi_dma_setup(struct Scsi_Host *host, struct scsi_pointer *SCp,
 			map_dir = DMA_FROM_DEVICE,
 			dma_dir = DMA_MODE_READ;
 
-		dma_map_sg(dev, info->sg, bufs + 1, map_dir);
+		dma_map_sg(dev, info->sg, bufs, map_dir);
 
 		disable_dma(dmach);
-		set_dma_sg(dmach, info->sg, bufs + 1);
+		set_dma_sg(dmach, info->sg, bufs);
 		set_dma_mode(dmach, dma_dir);
 		enable_dma(dmach);
 		return fasdma_real_all;
@@ -342,6 +342,7 @@ powertecscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
 	info->base = base;
 	powertecscsi_terminator_ctl(host, term[ec->slot_no]);
 
+	info->ec = ec;
 	info->info.scsi.io_base		= base + POWERTEC_FAS216_OFFSET;
 	info->info.scsi.io_shift	= POWERTEC_FAS216_SHIFT;
 	info->info.scsi.irq		= ec->irq;

drivers/scsi/arm/scsi.h

@@ -80,6 +80,7 @@ static inline void init_SCp(struct scsi_cmnd *SCpnt)
 			 (page_address(SCpnt->SCp.buffer->page) +
 			  SCpnt->SCp.buffer->offset);
 		SCpnt->SCp.this_residual = SCpnt->SCp.buffer->length;
+		SCpnt->SCp.phase = SCpnt->request_bufflen;
 
 #ifdef BELT_AND_BRACES
 		/*
@@ -98,6 +99,7 @@ static inline void init_SCp(struct scsi_cmnd *SCpnt)
 	} else {
 		SCpnt->SCp.ptr = (unsigned char *)SCpnt->request_buffer;
 		SCpnt->SCp.this_residual = SCpnt->request_bufflen;
+		SCpnt->SCp.phase = SCpnt->request_bufflen;
 	}
 
 	/*

include/asm-arm/arch-omap/entry-macro.S

@@ -61,6 +61,12 @@
 		.macro	disable_fiq
 		.endm
 
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
 		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
 		ldr	\base, =VA_IC_BASE
 		ldr	\irqnr, [\base, #0x98] /* IRQ pending reg 1 */

include/asm-arm/arch-omap/memory.h

@@ -70,7 +70,7 @@
 
 #define virt_to_lbus(x)		((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET)
 #define lbus_to_virt(x)		((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET)
-#define is_lbus_device(dev)	(cpu_is_omap1510() && dev && (strncmp(dev->bus_id, "ohci", 4) == 0))
+#define is_lbus_device(dev)	(cpu_is_omap15xx() && dev && (strncmp(dev->bus_id, "ohci", 4) == 0))
 
 #define __arch_page_to_dma(dev, page)	({is_lbus_device(dev) ? \
 					(dma_addr_t)virt_to_lbus(page_address(page)) : \

include/asm-arm/arch-omap/omap-alsa.h

@@ -65,7 +65,7 @@ struct audio_stream {
 	int period;		/* current transfer period */
 	int periods;		/* current count of periods registerd in the DMA engine */
 	spinlock_t dma_lock;	/* for locking in DMA operations */
-	snd_pcm_substream_t *stream;	/* the pcm stream */
+	struct snd_pcm_substream *stream;	/* the pcm stream */
 	unsigned linked:1;	/* dma channels linked */
 	int offset;		/* store start position of the last period in the alsa buffer */
 	int (*hw_start)(void);  /* interface to start HW interface, e.g. McBSP */
@@ -76,8 +76,8 @@ struct audio_stream {
  * Alsa card structure for aic23
  */
 struct snd_card_omap_codec {
-	snd_card_t *card;
-	snd_pcm_t *pcm;
+	struct snd_card *card;
+	struct snd_pcm *pcm;
 	long samplerate;
 	struct audio_stream s[2];	/* playback & capture */
 };
@@ -89,9 +89,9 @@ struct snd_card_omap_codec {
 struct omap_alsa_codec_config {
 	char 	*name;
 	struct	omap_mcbsp_reg_cfg *mcbsp_regs_alsa;
-	snd_pcm_hw_constraint_list_t *hw_constraints_rates;
-	snd_pcm_hardware_t *snd_omap_alsa_playback;
-	snd_pcm_hardware_t *snd_omap_alsa_capture;
+	struct	snd_pcm_hw_constraint_list *hw_constraints_rates;
+	struct	snd_pcm_hardware *snd_omap_alsa_playback;
+	struct	snd_pcm_hardware *snd_omap_alsa_capture;
 	void	(*codec_configure_dev)(void);
 	void	(*codec_set_samplerate)(long);
 	void	(*codec_clock_setup)(void);

include/asm-arm/system.h

@@ -167,11 +167,25 @@ extern unsigned int user_debug;
 				    : : "r" (0) : "memory")
 #define dmb() __asm__ __volatile__ ("" : : : "memory")
 #endif
-#define mb() dmb()
-#define rmb() mb()
-#define wmb() mb()
-#define read_barrier_depends() do { } while(0)
-#define set_mb(var, value)  do { var = value; mb(); } while (0)
+
+#define mb()			barrier()
+#define rmb()			barrier()
+#define wmb()			barrier()
+#define read_barrier_depends()	do { } while(0)
+
+#ifdef CONFIG_SMP
+#define smp_mb()		dmb()
+#define smp_rmb()		dmb()
+#define smp_wmb()		dmb()
+#define smp_read_barrier_depends()	read_barrier_depends()
+#else
+#define smp_mb()		barrier()
+#define smp_rmb()		barrier()
+#define smp_wmb()		barrier()
+#define smp_read_barrier_depends()	read_barrier_depends()
+#endif /* CONFIG_SMP */
+
+#define set_mb(var, value)	do { var = value; smp_mb(); } while (0)
 #define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t");
 
 extern unsigned long cr_no_alignment;	/* defined in entry-armv.S */
@@ -243,22 +257,6 @@ static inline void sched_cacheflush(void)
 {
 }
 
-#ifdef CONFIG_SMP
-
-#define smp_mb()		mb()
-#define smp_rmb()		rmb()
-#define smp_wmb()		wmb()
-#define smp_read_barrier_depends()		read_barrier_depends()
-
-#else
-
-#define smp_mb()		barrier()
-#define smp_rmb()		barrier()
-#define smp_wmb()		barrier()
-#define smp_read_barrier_depends()		do { } while(0)
-
-#endif /* CONFIG_SMP */
-
 #if defined(CONFIG_CPU_SA1100) || defined(CONFIG_CPU_SA110)
 /*
  * On the StrongARM, "swp" is terminally broken since it bypasses the