Merge commit 'kumar/next' into next

arch/powerpc/Kconfig

@@ -352,7 +352,7 @@ config ARCH_ENABLE_MEMORY_HOTREMOVE
 
 config KEXEC
 	bool "kexec system call (EXPERIMENTAL)"
-	depends on (PPC_BOOK3S || (FSL_BOOKE && !SMP)) && EXPERIMENTAL
+	depends on (PPC_BOOK3S || FSL_BOOKE) && EXPERIMENTAL
 	help
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot
@@ -369,8 +369,8 @@ config KEXEC
 
 config CRASH_DUMP
 	bool "Build a kdump crash kernel"
-	depends on PPC64 || 6xx
-	select RELOCATABLE if PPC64
+	depends on PPC64 || 6xx || FSL_BOOKE
+	select RELOCATABLE if PPC64 || FSL_BOOKE
 	help
 	  Build a kernel suitable for use as a kdump capture kernel.
 	  The same kernel binary can be used as production kernel and dump
@@ -898,7 +898,7 @@ config KERNEL_START_BOOL
 config KERNEL_START
 	hex "Virtual address of kernel base" if KERNEL_START_BOOL
 	default PAGE_OFFSET if PAGE_OFFSET_BOOL
-	default "0xc2000000" if CRASH_DUMP
+	default "0xc2000000" if CRASH_DUMP && !RELOCATABLE
 	default "0xc0000000"
 
 config PHYSICAL_START_BOOL
@@ -911,7 +911,7 @@ config PHYSICAL_START_BOOL
 
 config PHYSICAL_START
 	hex "Physical address where the kernel is loaded" if PHYSICAL_START_BOOL
-	default "0x02000000" if PPC_STD_MMU && CRASH_DUMP
+	default "0x02000000" if PPC_STD_MMU && CRASH_DUMP && !RELOCATABLE
 	default "0x00000000"
 
 config PHYSICAL_ALIGN

arch/powerpc/boot/dts/mpc8308rdb.dts

+/*
+ * MPC8308RDB Device Tree Source
+ *
+ * Copyright 2009 Freescale Semiconductor Inc.
+ * Copyright 2010 Ilya Yanok, Emcraft Systems, yanok@emcraft.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	compatible = "fsl,mpc8308rdb";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8308@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <16384>;
+			i-cache-size = <16384>;
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;	// 128MB at 0
+	};
+
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus";
+		reg = <0xe0005000 0x1000>;
+		interrupts = <77 0x8>;
+		interrupt-parent = <&ipic>;
+
+		// CS0 and CS1 are swapped when
+		// booting from nand, but the
+		// addresses are the same.
+		ranges = <0x0 0x0 0xfe000000 0x00800000
+		          0x1 0x0 0xe0600000 0x00002000
+		          0x2 0x0 0xf0000000 0x00020000
+		          0x3 0x0 0xfa000000 0x00008000>;
+
+		flash@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x800000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			u-boot@0 {
+				reg = <0x0 0x60000>;
+				read-only;
+			};
+			env@60000 {
+				reg = <0x60000 0x10000>;
+			};
+			env1@70000 {
+				reg = <0x70000 0x10000>;
+			};
+			kernel@80000 {
+				reg = <0x80000 0x200000>;
+			};
+			dtb@280000 {
+				reg = <0x280000 0x10000>;
+			};
+			ramdisk@290000 {
+				reg = <0x290000 0x570000>;
+			};
+		};
+
+		nand@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8315-fcm-nand",
+			             "fsl,elbc-fcm-nand";
+			reg = <0x1 0x0 0x2000>;
+
+			jffs2@0 {
+				reg = <0x0 0x2000000>;
+			};
+		};
+	};
+
+	immr@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,mpc8315-immr", "simple-bus";
+		ranges = <0 0xe0000000 0x00100000>;
+		reg = <0xe0000000 0x00000200>;
+		bus-frequency = <0>;
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <14 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+			rtc@68 {
+				compatible = "dallas,ds1339";
+				reg = <0x68>;
+			};
+		};
+
+		usb@23000 {
+			compatible = "fsl-usb2-dr";
+			reg = <0x23000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&ipic>;
+			interrupts = <38 0x8>;
+			dr_mode = "peripheral";
+			phy_type = "ulpi";
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x24000 0x1000>;
+
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <32 0x8 33 0x8 34 0x8>;
+			interrupt-parent = <&ipic>;
+			tbi-handle = < &tbi0 >;
+			phy-handle = < &phy2 >;
+			fsl,magic-packet;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+				phy2: ethernet-phy@2 {
+					interrupt-parent = <&ipic>;
+					interrupts = <17 0x8>;
+					reg = <0x2>;
+					device_type = "ethernet-phy";
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 0x8 36 0x8 37 0x8>;
+			interrupt-parent = <&ipic>;
+			tbi-handle = < &tbi1 >;
+			/* Vitesse 7385 isn't on the MDIO bus */
+			fixed-link = <1 1 1000 0 0>;
+			fsl,magic-packet;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <133333333>;
+			interrupts = <9 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <133333333>;
+			interrupts = <10 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		gpio@c00 {
+			#gpio-cells = <2>;
+			device_type = "gpio";
+			compatible = "fsl,mpc8308-gpio", "fsl,mpc8349-gpio";
+			reg = <0xc00 0x18>;
+			interrupts = <74 0x8>;
+			interrupt-parent = <&ipic>;
+			gpio-controller;
+		};
+
+		/* IPIC
+		 * interrupts cell = <intr #, sense>
+		 * sense values match linux IORESOURCE_IRQ_* defines:
+		 * sense == 8: Level, low assertion
+		 * sense == 2: Edge, high-to-low change
+		 */
+		ipic: interrupt-controller@700 {
+			compatible = "fsl,ipic";
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x700 0x100>;
+			device_type = "ipic";
+		};
+
+		ipic-msi@7c0 {
+			compatible = "fsl,ipic-msi";
+			reg = <0x7c0 0x40>;
+			msi-available-ranges = <0x0 0x100>;
+			interrupts = < 0x43 0x8
+					0x4  0x8
+					0x51 0x8
+					0x52 0x8
+					0x56 0x8
+					0x57 0x8
+					0x58 0x8
+					0x59 0x8 >;
+			interrupt-parent = < &ipic >;
+		};
+
+	};
+
+	pci0: pcie@e0009000 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		compatible = "fsl,mpc8308-pcie", "fsl,mpc8314-pcie";
+		reg = <0xe0009000 0x00001000
+			0xb0000000 0x01000000>;
+		ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
+		          0x01000000 0 0x00000000 0xb1000000 0 0x00800000>;
+		bus-range = <0 0>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0 0 0 1 &ipic 1 8
+				 0 0 0 2 &ipic 1 8
+				 0 0 0 3 &ipic 1 8
+				 0 0 0 4 &ipic 1 8>;
+		interrupts = <0x1 0x8>;
+		interrupt-parent = <&ipic>;
+		clock-frequency = <0>;
+
+		pcie@0 {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			reg = <0 0 0 0 0>;
+			ranges = <0x02000000 0 0xa0000000
+				  0x02000000 0 0xa0000000
+				  0 0x10000000
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00800000>;
+		};
+	};
+};

arch/powerpc/boot/dts/mpc8540ads.dts

@@ -71,14 +71,14 @@ ecm@1000 {
 		};
 
 		memory-controller@2000 {
-			compatible = "fsl,8540-memory-controller";
+			compatible = "fsl,mpc8540-memory-controller";
 			reg = <0x2000 0x1000>;
 			interrupt-parent = <&mpic>;
 			interrupts = <18 2>;
 		};
 
 		L2: l2-cache-controller@20000 {
-			compatible = "fsl,8540-l2-cache-controller";
+			compatible = "fsl,mpc8540-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
 			cache-size = <0x40000>;	// L2, 256K

arch/powerpc/boot/dts/mpc8541cds.dts

@@ -71,14 +71,14 @@ ecm@1000 {
 		};
 
 		memory-controller@2000 {
-			compatible = "fsl,8541-memory-controller";
+			compatible = "fsl,mpc8541-memory-controller";
 			reg = <0x2000 0x1000>;
 			interrupt-parent = <&mpic>;
 			interrupts = <18 2>;
 		};
 
 		L2: l2-cache-controller@20000 {
-			compatible = "fsl,8541-l2-cache-controller";
+			compatible = "fsl,mpc8541-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
 			cache-size = <0x40000>;	// L2, 256K

arch/powerpc/boot/dts/mpc8544ds.dts

@@ -73,14 +73,14 @@ ecm@1000 {
 		};
 
 		memory-controller@2000 {
-			compatible = "fsl,8544-memory-controller";
+			compatible = "fsl,mpc8544-memory-controller";
 			reg = <0x2000 0x1000>;
 			interrupt-parent = <&mpic>;
 			interrupts = <18 2>;
 		};
 
 		L2: l2-cache-controller@20000 {
-			compatible = "fsl,8544-l2-cache-controller";
+			compatible = "fsl,mpc8544-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
 			cache-size = <0x40000>;	// L2, 256K

arch/powerpc/boot/dts/mpc8548cds.dts

@@ -74,14 +74,14 @@ ecm@1000 {
 		};
 
 		memory-controller@2000 {
-			compatible = "fsl,8548-memory-controller";
+			compatible = "fsl,mpc8548-memory-controller";
 			reg = <0x2000 0x1000>;
 			interrupt-parent = <&mpic>;
 			interrupts = <18 2>;
 		};
 
 		L2: l2-cache-controller@20000 {
-			compatible = "fsl,8548-l2-cache-controller";
+			compatible = "fsl,mpc8548-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
 			cache-size = <0x80000>;	// L2, 512K

arch/powerpc/boot/dts/mpc8555cds.dts

@@ -71,14 +71,14 @@ ecm@1000 {
 		};
 
 		memory-controller@2000 {
-			compatible = "fsl,8555-memory-controller";
+			compatible = "fsl,mpc8555-memory-controller";
 			reg = <0x2000 0x1000>;
 			interrupt-parent = <&mpic>;
 			interrupts = <18 2>;
 		};
 
 		L2: l2-cache-controller@20000 {
-			compatible = "fsl,8555-l2-cache-controller";
+			compatible = "fsl,mpc8555-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
 			cache-size = <0x40000>;	// L2, 256K

arch/powerpc/boot/dts/mpc8560ads.dts

@@ -71,14 +71,14 @@ ecm@1000 {
 		};
 
 		memory-controller@2000 {
-			compatible = "fsl,8540-memory-controller";
+			compatible = "fsl,mpc8540-memory-controller";
 			reg = <0x2000 0x1000>;
 			interrupt-parent = <&mpic>;
 			interrupts = <18 2>;
 		};
 
 		L2: l2-cache-controller@20000 {
-			compatible = "fsl,8540-l2-cache-controller";
+			compatible = "fsl,mpc8540-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
 			cache-size = <0x40000>;	// L2, 256K

arch/powerpc/boot/dts/mpc8568mds.dts

@@ -124,14 +124,14 @@ ecm@1000 {
 		};
 
 		memory-controller@2000 {
-			compatible = "fsl,8568-memory-controller";
+			compatible = "fsl,mpc8568-memory-controller";
 			reg = <0x2000 0x1000>;
 			interrupt-parent = <&mpic>;
 			interrupts = <18 2>;
 		};
 
 		L2: l2-cache-controller@20000 {
-			compatible = "fsl,8568-l2-cache-controller";
+			compatible = "fsl,mpc8568-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
 			cache-size = <0x80000>;	// L2, 512K

arch/powerpc/boot/dts/p1021mds.dts

@@ -617,6 +617,7 @@ qe@ffe80000 {
 		bus-frequency = <0>;
 		fsl,qe-num-riscs = <1>;
 		fsl,qe-num-snums = <28>;
+		status = "disabled"; /* no firmware loaded */
 
 		qeic: interrupt-controller@80 {
 			interrupt-controller;

arch/powerpc/boot/dts/stxssa8555.dts

+/*
+ * MPC8555-based STx GP3 Device Tree Source
+ *
+ * Copyright 2006, 2008 Freescale Semiconductor Inc.
+ *
+ * Copyright 2010 Silicon Turnkey Express LLC.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "stx,gp3";
+        compatible = "stx,gp3-8560", "stx,gp3";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8555@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
+			timebase-frequency = <0>;	//  33 MHz, from uboot
+			bus-frequency = <0>;	// 166 MHz
+			clock-frequency = <0>;	// 825 MHz, from uboot
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>;
+	};
+
+	soc8555@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "simple-bus";
+		ranges = <0x0 0xe0000000 0x100000>;
+		bus-frequency = <0>;
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <8>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8555-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8555-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8555-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x40000>;	// L2, 256K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8555-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy0: ethernet-phy@2 {
+					interrupt-parent = <&mpic>;
+					interrupts = <5 1>;
+					reg = <0x2>;
+					device_type = "ethernet-phy";
+				};
+				phy1: ethernet-phy@4 {
+					interrupt-parent = <&mpic>;
+					interrupts = <5 1>;
+					reg = <0x4>;
+					device_type = "ethernet-phy";
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>; 	// reg base, size
+			clock-frequency = <0>; 	// should we fill in in uboot?
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;	// reg base, size
+			clock-frequency = <0>; 	// should we fill in in uboot?
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+
+		cpm@919c0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8555-cpm", "fsl,cpm2";
+			reg = <0x919c0 0x30>;
+			ranges;
+
+			muram@80000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x80000 0x10000>;
+
+				data@0 {
+					compatible = "fsl,cpm-muram-data";
+					reg = <0x0 0x2000 0x9000 0x1000>;
+				};
+			};
+
+			brg@919f0 {
+				compatible = "fsl,mpc8555-brg",
+				             "fsl,cpm2-brg",
+				             "fsl,cpm-brg";
+				reg = <0x919f0 0x10 0x915f0 0x10>;
+			};
+
+			cpmpic: pic@90c00 {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <2>;
+				interrupts = <46 2>;
+				interrupt-parent = <&mpic>;
+				reg = <0x90c00 0x80>;
+				compatible = "fsl,mpc8555-cpm-pic", "fsl,cpm2-pic";
+			};
+		};
+	};
+
+	pci0: pci@e0008000 {
+		interrupt-map-mask = <0x1f800 0x0 0x0 0x7>;
+		interrupt-map = <
+
+			/* IDSEL 0x10 */
+			0x8000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x8000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x8000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x8000 0x0 0x0 0x4 &mpic 0x3 0x1
+
+			/* IDSEL 0x11 */
+			0x8800 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x8800 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x8800 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x8800 0x0 0x0 0x4 &mpic 0x3 0x1
+
+			/* IDSEL 0x12 (Slot 1) */
+			0x9000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x9000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x9000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x9000 0x0 0x0 0x4 &mpic 0x3 0x1
+
+			/* IDSEL 0x13 (Slot 2) */
+			0x9800 0x0 0x0 0x1 &mpic 0x1 0x1
+			0x9800 0x0 0x0 0x2 &mpic 0x2 0x1
+			0x9800 0x0 0x0 0x3 &mpic 0x3 0x1
+			0x9800 0x0 0x0 0x4 &mpic 0x0 0x1
+
+			/* IDSEL 0x14 (Slot 3) */
+			0xa000 0x0 0x0 0x1 &mpic 0x2 0x1
+			0xa000 0x0 0x0 0x2 &mpic 0x3 0x1
+			0xa000 0x0 0x0 0x3 &mpic 0x0 0x1
+			0xa000 0x0 0x0 0x4 &mpic 0x1 0x1
+
+			/* IDSEL 0x15 (Slot 4) */
+			0xa800 0x0 0x0 0x1 &mpic 0x3 0x1
+			0xa800 0x0 0x0 0x2 &mpic 0x0 0x1
+			0xa800 0x0 0x0 0x3 &mpic 0x1 0x1
+			0xa800 0x0 0x0 0x4 &mpic 0x2 0x1
+
+			/* Bus 1 (Tundra Bridge) */
+			/* IDSEL 0x12 (ISA bridge) */
+			0x19000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0x19000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0x19000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0x19000 0x0 0x0 0x4 &mpic 0x3 0x1>;
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		bus-range = <0 0>;
+		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>;
+		clock-frequency = <66666666>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe0008000 0x1000>;
+		compatible = "fsl,mpc8540-pci";
+		device_type = "pci";
+
+		i8259@19000 {
+			interrupt-controller;
+			device_type = "interrupt-controller";
+			reg = <0x19000 0x0 0x0 0x0 0x1>;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			compatible = "chrp,iic";
+			interrupts = <1>;
+			interrupt-parent = <&pci0>;
+		};
+	};
+
+	pci1: pci@e0009000 {
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+
+			/* IDSEL 0x15 */
+			0xa800 0x0 0x0 0x1 &mpic 0xb 0x1
+			0xa800 0x0 0x0 0x2 &mpic 0xb 0x1
+			0xa800 0x0 0x0 0x3 &mpic 0xb 0x1
+			0xa800 0x0 0x0 0x4 &mpic 0xb 0x1>;
+		interrupt-parent = <&mpic>;
+		interrupts = <25 2>;
+		bus-range = <0 0>;
+		ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>;
+		clock-frequency = <66666666>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe0009000 0x1000>;
+		compatible = "fsl,mpc8540-pci";
+		device_type = "pci";
+	};
+};

arch/powerpc/boot/dts/tqm8540.dts

@@ -289,7 +289,14 @@ pci0: pci@e0008000 {
 		interrupt-map = <
 				/* IDSEL 28 */
 				 0xe000 0 0 1 &mpic 2 1
-				 0xe000 0 0 2 &mpic 3 1>;
+				 0xe000 0 0 2 &mpic 3 1
+				 0xe000 0 0 3 &mpic 6 1
+				 0xe000 0 0 4 &mpic 5 1
+
+				/* IDSEL 11 */
+				 0x5800 0 0 1 &mpic 6 1
+				 0x5800 0 0 2 &mpic 5 1
+				 >;
 
 		interrupt-parent = <&mpic>;
 		interrupts = <24 2>;

arch/powerpc/boot/dts/tqm8541.dts

@@ -311,7 +311,14 @@ pci0: pci@e0008000 {
 		interrupt-map = <
 				/* IDSEL 28 */
 				 0xe000 0 0 1 &mpic 2 1
-				 0xe000 0 0 2 &mpic 3 1>;
+				 0xe000 0 0 2 &mpic 3 1
+				 0xe000 0 0 3 &mpic 6 1
+				 0xe000 0 0 4 &mpic 5 1
+
+				/* IDSEL 11 */
+				 0x5800 0 0 1 &mpic 6 1
+				 0x5800 0 0 2 &mpic 5 1
+				 >;
 
 		interrupt-parent = <&mpic>;
 		interrupts = <24 2>;

arch/powerpc/boot/dts/tqm8548-bigflash.dts

@@ -442,7 +442,14 @@ pci0: pci@a0008000 {
 		interrupt-map = <
 				/* IDSEL 28 */
 				 0xe000 0 0 1 &mpic 2 1
-				 0xe000 0 0 2 &mpic 3 1>;
+				 0xe000 0 0 2 &mpic 3 1
+				 0xe000 0 0 3 &mpic 6 1
+				 0xe000 0 0 4 &mpic 5 1
+
+				/* IDSEL 11 */
+				 0x5800 0 0 1 &mpic 6 1
+				 0x5800 0 0 2 &mpic 5 1
+				 >;
 
 		interrupt-parent = <&mpic>;
 		interrupts = <24 2>;

arch/powerpc/boot/dts/tqm8548.dts

@@ -442,7 +442,14 @@ pci0: pci@e0008000 {
 		interrupt-map = <
 				/* IDSEL 28 */
 				 0xe000 0 0 1 &mpic 2 1
-				 0xe000 0 0 2 &mpic 3 1>;
+				 0xe000 0 0 2 &mpic 3 1
+				 0xe000 0 0 3 &mpic 6 1
+				 0xe000 0 0 4 &mpic 5 1
+
+				/* IDSEL 11 */
+				 0x5800 0 0 1 &mpic 6 1
+				 0x5800 0 0 2 &mpic 5 1
+				 >;
 
 		interrupt-parent = <&mpic>;
 		interrupts = <24 2>;

arch/powerpc/boot/dts/tqm8555.dts

@@ -311,7 +311,14 @@ pci0: pci@e0008000 {
 		interrupt-map = <
 				/* IDSEL 28 */
 				 0xe000 0 0 1 &mpic 2 1
-				 0xe000 0 0 2 &mpic 3 1>;
+				 0xe000 0 0 2 &mpic 3 1
+				 0xe000 0 0 3 &mpic 6 1
+				 0xe000 0 0 4 &mpic 5 1
+
+				/* IDSEL 11 */
+				 0x5800 0 0 1 &mpic 6 1
+				 0x5800 0 0 2 &mpic 5 1
+				 >;
 
 		interrupt-parent = <&mpic>;
 		interrupts = <24 2>;

arch/powerpc/boot/dts/tqm8560.dts

@@ -382,7 +382,14 @@ pci0: pci@e0008000 {
 		interrupt-map = <
 				/* IDSEL 28 */
 				 0xe000 0 0 1 &mpic 2 1
-				 0xe000 0 0 2 &mpic 3 1>;
+				 0xe000 0 0 2 &mpic 3 1
+				 0xe000 0 0 3 &mpic 6 1
+				 0xe000 0 0 4 &mpic 5 1
+
+				/* IDSEL 11 */
+				 0x5800 0 0 1 &mpic 6 1
+				 0x5800 0 0 2 &mpic 5 1
+				 >;
 
 		interrupt-parent = <&mpic>;
 		interrupts = <24 2>;

arch/powerpc/boot/dts/tqm8xx.dts

+/*
+ * TQM8XX Device Tree Source
+ *
+ * Heiko Schocher <hs@denx.de>
+ * 2010 DENX Software Engineering GmbH
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "TQM8xx";
+	compatible = "tqc,tqm8xx";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+		mdio1 = &phy1;
+		serial0 = &smc1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,860@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <16>;	// 16 bytes
+			i-cache-line-size = <16>;	// 16 bytes
+			d-cache-size = <0x1000>;		// L1, 4K
+			i-cache-size = <0x1000>;		// L1, 4K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			interrupts = <15 2>;	// decrementer interrupt
+			interrupt-parent = <&PIC>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x2000000>;
+	};
+
+	localbus@fff00100 {
+		compatible = "fsl,mpc860-localbus", "fsl,pq1-localbus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xfff00100 0x40>;
+
+		ranges = <
+			0x0 0x0 0x40000000 0x800000
+		>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x800000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			bank-width = <4>;
+			device-width = <2>;
+		};
+	};
+
+	soc@fff00000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0x0 0xfff00000 0x00004000>;
+
+		phy1: mdio@e00 {
+			compatible = "fsl,mpc866-fec-mdio", "fsl,pq1-fec-mdio";
+			reg = <0xe00 0x188>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			PHY: ethernet-phy@f {
+				reg = <0xf>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		eth1: ethernet@e00 {
+			device_type = "network";
+			compatible = "fsl,mpc866-fec-enet",
+			             "fsl,pq1-fec-enet";
+			reg = <0xe00 0x188>;
+			interrupts = <3 1>;
+			interrupt-parent = <&PIC>;
+			phy-handle = <&PHY>;
+			linux,network-index = <1>;
+		};
+
+		PIC: pic@0 {
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x0 0x24>;
+			compatible = "fsl,mpc860-pic", "fsl,pq1-pic";
+		};
+
+		cpm@9c0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc860-cpm", "fsl,cpm1";
+			ranges;
+			reg = <0x9c0 0x40>;
+			brg-frequency = <0>;
+			interrupts = <0 2>;	// cpm error interrupt
+			interrupt-parent = <&CPM_PIC>;
+
+			muram@2000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x2000 0x2000>;
+
+				data@0 {
+					compatible = "fsl,cpm-muram-data";
+					reg = <0x0 0x2000>;
+				};
+			};
+
+			brg@9f0 {
+				compatible = "fsl,mpc860-brg",
+					     "fsl,cpm1-brg",
+					     "fsl,cpm-brg";
+				reg = <0x9f0 0x10>;
+				clock-frequency = <0>;
+			};
+
+			CPM_PIC: pic@930 {
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+				interrupts = <5 2 0 2>;
+				interrupt-parent = <&PIC>;
+				reg = <0x930 0x20>;
+				compatible = "fsl,mpc860-cpm-pic",
+				             "fsl,cpm1-pic";
+			};
+
+
+			smc1: serial@a80 {
+				device_type = "serial";
+				compatible = "fsl,mpc860-smc-uart",
+				             "fsl,cpm1-smc-uart";
+				reg = <0xa80 0x10 0x3e80 0x40>;
+				interrupts = <4>;
+				interrupt-parent = <&CPM_PIC>;
+				fsl,cpm-brg = <1>;
+				fsl,cpm-command = <0x90>;
+			};
+
+			eth0: ethernet@a00 {
+				device_type = "network";
+				compatible = "fsl,mpc860-scc-enet",
+				             "fsl,cpm1-scc-enet";
+				reg = <0xa00 0x18 0x3c00 0x100>;
+				interrupts = <30>;
+				interrupt-parent = <&CPM_PIC>;
+				fsl,cpm-command = <0000>;
+				linux,network-index = <0>;
+				fixed-link = <0 0 10 0 0>;
+			};
+		};
+	};
+};

arch/powerpc/configs/mpc85xx_defconfig

@@ -19,7 +19,8 @@ CONFIG_E500=y
 CONFIG_FSL_EMB_PERFMON=y
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
-# CONFIG_PHYS_64BIT is not set
+CONFIG_PTE_64BIT=y
+CONFIG_PHYS_64BIT=y
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
 CONFIG_PPC_MMU_NOHASH_32=y
@@ -28,7 +29,7 @@ CONFIG_PPC_BOOK3E_MMU=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
 CONFIG_MMU=y
 CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_GENERIC_TIME=y
@@ -239,6 +240,7 @@ CONFIG_MPC85xx_MDS=y
 CONFIG_MPC8536_DS=y
 CONFIG_MPC85xx_DS=y
 CONFIG_MPC85xx_RDB=y
+CONFIG_P1022_DS=y
 CONFIG_SOCRATES=y
 CONFIG_KSI8560=y
 CONFIG_XES_MPC85xx=y
@@ -311,7 +313,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
@@ -321,7 +323,7 @@ CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
 # CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_FORCE_MAX_ZONEORDER=12
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 CONFIG_EXTRA_TARGETS=""
@@ -1122,16 +1124,13 @@ CONFIG_VGA_CONSOLE=y
 # CONFIG_VGACON_SOFT_SCROLLBACK is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+# CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
 # CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
 # CONFIG_SND_HRTIMER is not set
 # CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
@@ -1145,12 +1144,7 @@ CONFIG_SND_VMASTER=y
 # CONFIG_SND_SBAWE_SEQ is not set
 # CONFIG_SND_EMU10K1_SEQ is not set
 CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
+# CONFIG_SND_DRIVERS is not set
 CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
@@ -1218,12 +1212,8 @@ CONFIG_SND_INTEL8X0=y
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-CONFIG_SND_PPC=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_UA101 is not set
-# CONFIG_SND_USB_USX2Y is not set
-# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_PPC is not set
+# CONFIG_SND_USB is not set
 # CONFIG_SND_SOC is not set
 # CONFIG_SOUND_PRIME is not set
 CONFIG_AC97_BUS=y

arch/powerpc/configs/mpc85xx_smp_defconfig

@@ -19,7 +19,8 @@ CONFIG_E500=y
 CONFIG_FSL_EMB_PERFMON=y
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
-# CONFIG_PHYS_64BIT is not set
+CONFIG_PTE_64BIT=y
+CONFIG_PHYS_64BIT=y
 CONFIG_SPE=y
 CONFIG_PPC_MMU_NOHASH=y
 CONFIG_PPC_MMU_NOHASH_32=y
@@ -29,7 +30,7 @@ CONFIG_SMP=y
 CONFIG_NR_CPUS=8
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
 CONFIG_MMU=y
 CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_GENERIC_TIME=y
@@ -243,6 +244,7 @@ CONFIG_MPC85xx_MDS=y
 CONFIG_MPC8536_DS=y
 CONFIG_MPC85xx_DS=y
 CONFIG_MPC85xx_RDB=y
+CONFIG_P1022_DS=y
 CONFIG_SOCRATES=y
 CONFIG_KSI8560=y
 CONFIG_XES_MPC85xx=y
@@ -316,7 +318,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
@@ -326,7 +328,7 @@ CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
 # CONFIG_PPC_256K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_FORCE_MAX_ZONEORDER=12
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 CONFIG_EXTRA_TARGETS=""
@@ -1127,16 +1129,13 @@ CONFIG_VGA_CONSOLE=y
 # CONFIG_VGACON_SOFT_SCROLLBACK is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+# CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
 # CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
 # CONFIG_SND_HRTIMER is not set
 # CONFIG_SND_DYNAMIC_MINORS is not set
 # CONFIG_SND_SUPPORT_OLD_API is not set
@@ -1150,12 +1149,7 @@ CONFIG_SND_VMASTER=y
 # CONFIG_SND_SBAWE_SEQ is not set
 # CONFIG_SND_EMU10K1_SEQ is not set
 CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
+# CONFIG_SND_DRIVERS is not set
 CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
@@ -1223,12 +1217,8 @@ CONFIG_SND_INTEL8X0=y
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-CONFIG_SND_PPC=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_UA101 is not set
-# CONFIG_SND_USB_USX2Y is not set
-# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_PPC is not set
+# CONFIG_SND_USB is not set
 # CONFIG_SND_SOC is not set
 # CONFIG_SOUND_PRIME is not set
 CONFIG_AC97_BUS=y

arch/powerpc/platforms/83xx/Kconfig

@@ -9,6 +9,14 @@ menuconfig PPC_83xx
 
 if PPC_83xx
 
+config MPC830x_RDB
+	bool "Freescale MPC830x RDB"
+	select DEFAULT_UIMAGE
+	select PPC_MPC831x
+	select FSL_GTM
+	help
+	  This option enables support for the MPC8308 RDB board.
+
 config MPC831x_RDB
 	bool "Freescale MPC831x RDB"
 	select DEFAULT_UIMAGE

arch/powerpc/platforms/83xx/Makefile

@@ -4,6 +4,7 @@
 obj-y				:= misc.o usb.o
 obj-$(CONFIG_SUSPEND)		+= suspend.o suspend-asm.o
 obj-$(CONFIG_MCU_MPC8349EMITX)	+= mcu_mpc8349emitx.o
+obj-$(CONFIG_MPC830x_RDB)	+= mpc830x_rdb.o
 obj-$(CONFIG_MPC831x_RDB)	+= mpc831x_rdb.o
 obj-$(CONFIG_MPC832x_RDB)	+= mpc832x_rdb.o
 obj-$(CONFIG_MPC834x_MDS)	+= mpc834x_mds.o

arch/powerpc/platforms/83xx/mpc830x_rdb.c

+/*
+ * arch/powerpc/platforms/83xx/mpc830x_rdb.c
+ *
+ * Description: MPC830x RDB board specific routines.
+ * This file is based on mpc831x_rdb.c
+ *
+ * Copyright (C) Freescale Semiconductor, Inc. 2009. All rights reserved.
+ * Copyright (C) 2010. Ilya Yanok, Emcraft Systems, yanok@emcraft.com
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/pci.h>
+#include <linux/of_platform.h>
+#include <asm/time.h>
+#include <asm/ipic.h>
+#include <asm/udbg.h>
+#include <sysdev/fsl_pci.h>
+#include <sysdev/fsl_soc.h>
+#include "mpc83xx.h"
+
+/*
+ * Setup the architecture
+ */
+static void __init mpc830x_rdb_setup_arch(void)
+{
+#ifdef CONFIG_PCI
+	struct device_node *np;
+#endif
+
+	if (ppc_md.progress)
+		ppc_md.progress("mpc830x_rdb_setup_arch()", 0);
+
+#ifdef CONFIG_PCI
+	for_each_compatible_node(np, "pci", "fsl,mpc8308-pcie")
+		mpc83xx_add_bridge(np);
+#endif
+	mpc831x_usb_cfg();
+}
+
+static void __init mpc830x_rdb_init_IRQ(void)
+{
+	struct device_node *np;
+
+	np = of_find_node_by_type(NULL, "ipic");
+	if (!np)
+		return;
+
+	ipic_init(np, 0);
+
+	/* Initialize the default interrupt mapping priorities,
+	 * in case the boot rom changed something on us.
+	 */
+	ipic_set_default_priority();
+}
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init mpc830x_rdb_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	return of_flat_dt_is_compatible(root, "MPC8308RDB") ||
+	       of_flat_dt_is_compatible(root, "fsl,mpc8308rdb");
+}
+
+static struct of_device_id __initdata of_bus_ids[] = {
+	{ .compatible = "simple-bus" },
+	{ .compatible = "gianfar" },
+	{},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+	of_platform_bus_probe(NULL, of_bus_ids, NULL);
+	return 0;
+}
+machine_device_initcall(mpc830x_rdb, declare_of_platform_devices);
+
+define_machine(mpc830x_rdb) {
+	.name			= "MPC830x RDB",
+	.probe			= mpc830x_rdb_probe,
+	.setup_arch		= mpc830x_rdb_setup_arch,
+	.init_IRQ		= mpc830x_rdb_init_IRQ,
+	.get_irq		= ipic_get_irq,
+	.restart		= mpc83xx_restart,
+	.time_init		= mpc83xx_time_init,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};

arch/powerpc/platforms/85xx/Kconfig

@@ -65,6 +65,14 @@ config MPC85xx_RDB
 	help
 	  This option enables support for the MPC85xx RDB (P2020 RDB) board
 
+config P1022_DS
+	bool "Freescale P1022 DS"
+	select DEFAULT_UIMAGE
+	select CONFIG_PHYS_64BIT	# The DTS has 36-bit addresses
+	select SWIOTLB
+	help
+	  This option enables support for the Freescale P1022DS reference board.
+
 config SOCRATES
 	bool "Socrates"
 	select DEFAULT_UIMAGE

arch/powerpc/platforms/85xx/Makefile

@@ -10,6 +10,7 @@ obj-$(CONFIG_MPC8536_DS)  += mpc8536_ds.o
 obj-$(CONFIG_MPC85xx_DS)  += mpc85xx_ds.o
 obj-$(CONFIG_MPC85xx_MDS) += mpc85xx_mds.o
 obj-$(CONFIG_MPC85xx_RDB) += mpc85xx_rdb.o
+obj-$(CONFIG_P1022_DS)    += p1022_ds.o
 obj-$(CONFIG_P4080_DS)    += p4080_ds.o corenet_ds.o
 obj-$(CONFIG_STX_GP3)	  += stx_gp3.o
 obj-$(CONFIG_TQM85xx)	  += tqm85xx.o

arch/powerpc/platforms/85xx/mpc85xx_mds.c

@@ -158,73 +158,41 @@ static int mpc8568_mds_phy_fixups(struct phy_device *phydev)
 extern void __init mpc85xx_smp_init(void);
 #endif
 
-static void __init mpc85xx_mds_setup_arch(void)
+#ifdef CONFIG_QUICC_ENGINE
+static struct of_device_id mpc85xx_qe_ids[] __initdata = {
+	{ .type = "qe", },
+	{ .compatible = "fsl,qe", },
+	{ },
+};
+
+static void __init mpc85xx_publish_qe_devices(void)
 {
 	struct device_node *np;
-	static u8 __iomem *bcsr_regs = NULL;
-#ifdef CONFIG_PCI
-	struct pci_controller *hose;
-#endif
-	dma_addr_t max = 0xffffffff;
-
-	if (ppc_md.progress)
-		ppc_md.progress("mpc85xx_mds_setup_arch()", 0);
-
-	/* Map BCSR area */
-	np = of_find_node_by_name(NULL, "bcsr");
-	if (np != NULL) {
-		struct resource res;
 
-		of_address_to_resource(np, 0, &res);
-		bcsr_regs = ioremap(res.start, res.end - res.start +1);
+	np = of_find_compatible_node(NULL, NULL, "fsl,qe");
+	if (!of_device_is_available(np)) {
 		of_node_put(np);
+		return;
 	}
 
-#ifdef CONFIG_PCI
-	for_each_node_by_type(np, "pci") {
-		if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
-		    of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
-			struct resource rsrc;
-			of_address_to_resource(np, 0, &rsrc);
-			if ((rsrc.start & 0xfffff) == 0x8000)
-				fsl_add_bridge(np, 1);
-			else
-				fsl_add_bridge(np, 0);
-
-			hose = pci_find_hose_for_OF_device(np);
-			max = min(max, hose->dma_window_base_cur +
-					hose->dma_window_size);
-		}
-	}
-#endif
+	of_platform_bus_probe(NULL, mpc85xx_qe_ids, NULL);
+}
 
-#ifdef CONFIG_SMP
-	mpc85xx_smp_init();
-#endif
+static void __init mpc85xx_mds_reset_ucc_phys(void)
+{
+	struct device_node *np;
+	static u8 __iomem *bcsr_regs;
 
-#ifdef CONFIG_QUICC_ENGINE
-	np = of_find_compatible_node(NULL, NULL, "fsl,qe");
-	if (!np) {
-		np = of_find_node_by_name(NULL, "qe");
+	/* Map BCSR area */
+	np = of_find_node_by_name(NULL, "bcsr");
 	if (!np)
 		return;
-	}
 
-	qe_reset();
+	bcsr_regs = of_iomap(np, 0);
 	of_node_put(np);
+	if (!bcsr_regs)
+		return;
 
-	np = of_find_node_by_name(NULL, "par_io");
-	if (np) {
-		struct device_node *ucc;
-
-		par_io_init(np);
-		of_node_put(np);
-
-		for_each_node_by_name(ucc, "ucc")
-			par_io_of_config(ucc);
-	}
-
-	if (bcsr_regs) {
 	if (machine_is(mpc8568_mds)) {
 #define BCSR_UCC1_GETH_EN	(0x1 << 7)
 #define BCSR_UCC2_GETH_EN	(0x1 << 7)
@@ -278,7 +246,6 @@ static void __init mpc85xx_mds_setup_arch(void)
 				clrsetbits_8(&bcsr_regs[7 + ucc_num],
 					BCSR_UCC_RGMII, BCSR_UCC_RTBI);
 		}
-
 	} else if (machine_is(p1021_mds)) {
 #define BCSR11_ENET_MICRST     (0x1 << 5)
 		/* Reset Micrel PHY */
@@ -287,8 +254,40 @@ static void __init mpc85xx_mds_setup_arch(void)
 	}
 
 	iounmap(bcsr_regs);
+}
+
+static void __init mpc85xx_mds_qe_init(void)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,qe");
+	if (!np) {
+		np = of_find_node_by_name(NULL, "qe");
+		if (!np)
+			return;
 	}
 
+	if (!of_device_is_available(np)) {
+		of_node_put(np);
+		return;
+	}
+
+	qe_reset();
+	of_node_put(np);
+
+	np = of_find_node_by_name(NULL, "par_io");
+	if (np) {
+		struct device_node *ucc;
+
+		par_io_init(np);
+		of_node_put(np);
+
+		for_each_node_by_name(ucc, "ucc")
+			par_io_of_config(ucc);
+	}
+
+	mpc85xx_mds_reset_ucc_phys();
+
 	if (machine_is(p1021_mds)) {
 #define MPC85xx_PMUXCR_OFFSET           0x60
 #define MPC85xx_PMUXCR_QE0              0x00008000
@@ -322,8 +321,72 @@ static void __init mpc85xx_mds_setup_arch(void)
 		}
 
 	}
+}
+
+static void __init mpc85xx_mds_qeic_init(void)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,qe");
+	if (!of_device_is_available(np)) {
+		of_node_put(np);
+		return;
+	}
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
+	if (!np) {
+		np = of_find_node_by_type(NULL, "qeic");
+		if (!np)
+			return;
+	}
+
+	if (machine_is(p1021_mds))
+		qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
+				qe_ic_cascade_high_mpic);
+	else
+		qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL);
+	of_node_put(np);
+}
+#else
+static void __init mpc85xx_publish_qe_devices(void) { }
+static void __init mpc85xx_mds_qe_init(void) { }
+static void __init mpc85xx_mds_qeic_init(void) { }
 #endif	/* CONFIG_QUICC_ENGINE */
 
+static void __init mpc85xx_mds_setup_arch(void)
+{
+#ifdef CONFIG_PCI
+	struct pci_controller *hose;
+#endif
+	dma_addr_t max = 0xffffffff;
+
+	if (ppc_md.progress)
+		ppc_md.progress("mpc85xx_mds_setup_arch()", 0);
+
+#ifdef CONFIG_PCI
+	for_each_node_by_type(np, "pci") {
+		if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
+		    of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
+			struct resource rsrc;
+			of_address_to_resource(np, 0, &rsrc);
+			if ((rsrc.start & 0xfffff) == 0x8000)
+				fsl_add_bridge(np, 1);
+			else
+				fsl_add_bridge(np, 0);
+
+			hose = pci_find_hose_for_OF_device(np);
+			max = min(max, hose->dma_window_base_cur +
+					hose->dma_window_size);
+		}
+	}
+#endif
+
+#ifdef CONFIG_SMP
+	mpc85xx_smp_init();
+#endif
+
+	mpc85xx_mds_qe_init();
+
 #ifdef CONFIG_SWIOTLB
 	if (memblock_end_of_DRAM() > max) {
 		ppc_swiotlb_enable = 1;
@@ -369,8 +432,6 @@ static struct of_device_id mpc85xx_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
 	{ .compatible = "simple-bus", },
-	{ .type = "qe", },
-	{ .compatible = "fsl,qe", },
 	{ .compatible = "gianfar", },
 	{ .compatible = "fsl,rapidio-delta", },
 	{ .compatible = "fsl,mpc8548-guts", },
@@ -382,8 +443,6 @@ static struct of_device_id p1021_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
 	{ .compatible = "simple-bus", },
-	{ .type = "qe", },
-	{ .compatible = "fsl,qe", },
 	{ .compatible = "gianfar", },
 	{},
 };
@@ -395,16 +454,16 @@ static int __init mpc85xx_publish_devices(void)
 	if (machine_is(mpc8569_mds))
 		simple_gpiochip_init("fsl,mpc8569mds-bcsr-gpio");
 
-	/* Publish the QE devices */
 	of_platform_bus_probe(NULL, mpc85xx_ids, NULL);
+	mpc85xx_publish_qe_devices();
 
 	return 0;
 }
 
 static int __init p1021_publish_devices(void)
 {
-	/* Publish the QE devices */
 	of_platform_bus_probe(NULL, p1021_ids, NULL);
+	mpc85xx_publish_qe_devices();
 
 	return 0;
 }
@@ -441,21 +500,7 @@ static void __init mpc85xx_mds_pic_init(void)
 	of_node_put(np);
 
 	mpic_init(mpic);
-
-#ifdef CONFIG_QUICC_ENGINE
-	np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
-	if (!np) {
-		np = of_find_node_by_type(NULL, "qeic");
-		if (!np)
-			return;
-	}
-	if (machine_is(p1021_mds))
-		qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
-				qe_ic_cascade_high_mpic);
-	else
-		qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL);
-	of_node_put(np);
-#endif				/* CONFIG_QUICC_ENGINE */
+	mpc85xx_mds_qeic_init();
 }
 
 static int __init mpc85xx_mds_probe(void)

arch/powerpc/platforms/85xx/p1022_ds.c

+/*
+ * P1022DS board specific routines
+ *
+ * Authors: Travis Wheatley <travis.wheatley@freescale.com>
+ *          Dave Liu <daveliu@freescale.com>
+ *          Timur Tabi <timur@freescale.com>
+ *
+ * Copyright 2010 Freescale Semiconductor, Inc.
+ *
+ * This file is taken from the Freescale P1022DS BSP, with modifications:
+ * 1) No DIU support (pending rewrite of DIU code)
+ * 2) No AMP support
+ * 3) No PCI endpoint support
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/pci.h>
+#include <linux/of_platform.h>
+#include <linux/lmb.h>
+
+#include <asm/mpic.h>
+#include <asm/swiotlb.h>
+
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+
+void __init p1022_ds_pic_init(void)
+{
+	struct mpic *mpic;
+	struct resource r;
+	struct device_node *np;
+
+	np = of_find_node_by_type(NULL, "open-pic");
+	if (!np) {
+		pr_err("Could not find open-pic node\n");
+		return;
+	}
+
+	if (of_address_to_resource(np, 0, &r)) {
+		pr_err("Failed to map mpic register space\n");
+		of_node_put(np);
+		return;
+	}
+
+	mpic = mpic_alloc(np, r.start,
+		MPIC_PRIMARY | MPIC_WANTS_RESET |
+		MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS |
+		MPIC_SINGLE_DEST_CPU,
+		0, 256, " OpenPIC  ");
+
+	BUG_ON(mpic == NULL);
+	of_node_put(np);
+
+	mpic_init(mpic);
+}
+
+#ifdef CONFIG_SMP
+void __init mpc85xx_smp_init(void);
+#endif
+
+/*
+ * Setup the architecture
+ */
+static void __init p1022_ds_setup_arch(void)
+{
+#ifdef CONFIG_PCI
+	struct device_node *np;
+#endif
+	dma_addr_t max = 0xffffffff;
+
+	if (ppc_md.progress)
+		ppc_md.progress("p1022_ds_setup_arch()", 0);
+
+#ifdef CONFIG_PCI
+	for_each_compatible_node(np, "pci", "fsl,p1022-pcie") {
+		struct resource rsrc;
+		struct pci_controller *hose;
+
+		of_address_to_resource(np, 0, &rsrc);
+
+		if ((rsrc.start & 0xfffff) == 0x8000)
+			fsl_add_bridge(np, 1);
+		else
+			fsl_add_bridge(np, 0);
+
+		hose = pci_find_hose_for_OF_device(np);
+		max = min(max, hose->dma_window_base_cur +
+			  hose->dma_window_size);
+	}
+#endif
+
+#ifdef CONFIG_SMP
+	mpc85xx_smp_init();
+#endif
+
+#ifdef CONFIG_SWIOTLB
+	if (lmb_end_of_DRAM() > max) {
+		ppc_swiotlb_enable = 1;
+		set_pci_dma_ops(&swiotlb_dma_ops);
+		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
+	}
+#endif
+
+	pr_info("Freescale P1022 DS reference board\n");
+}
+
+static struct of_device_id __initdata p1022_ds_ids[] = {
+	{ .type = "soc", },
+	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
+	{ .compatible = "gianfar", },
+	{},
+};
+
+static int __init p1022_ds_publish_devices(void)
+{
+	return of_platform_bus_probe(NULL, p1022_ds_ids, NULL);
+}
+machine_device_initcall(p1022_ds, p1022_ds_publish_devices);
+
+machine_arch_initcall(p1022_ds, swiotlb_setup_bus_notifier);
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init p1022_ds_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	return of_flat_dt_is_compatible(root, "fsl,p1022ds");
+}
+
+define_machine(p1022_ds) {
+	.name			= "P1022 DS",
+	.probe			= p1022_ds_probe,
+	.setup_arch		= p1022_ds_setup_arch,
+	.init_IRQ		= p1022_ds_pic_init,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+	.get_irq		= mpic_get_irq,
+	.restart		= fsl_rstcr_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};

arch/powerpc/platforms/85xx/smp.c

@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/of.h>
+#include <linux/kexec.h>
 
 #include <asm/machdep.h>
 #include <asm/pgtable.h>
@@ -24,6 +25,7 @@
 #include <asm/dbell.h>
 
 #include <sysdev/fsl_soc.h>
+#include <sysdev/mpic.h>
 
 extern void __early_start(void);
 
@@ -105,8 +107,64 @@ smp_85xx_setup_cpu(int cpu_nr)
 
 struct smp_ops_t smp_85xx_ops = {
 	.kick_cpu = smp_85xx_kick_cpu,
+#ifdef CONFIG_KEXEC
+	.give_timebase	= smp_generic_give_timebase,
+	.take_timebase	= smp_generic_take_timebase,
+#endif
 };
 
+#ifdef CONFIG_KEXEC
+static int kexec_down_cpus = 0;
+
+void mpc85xx_smp_kexec_cpu_down(int crash_shutdown, int secondary)
+{
+	mpic_teardown_this_cpu(1);
+
+	/* When crashing, this gets called on all CPU's we only
+	 * take down the non-boot cpus */
+	if (smp_processor_id() != boot_cpuid)
+	{
+		local_irq_disable();
+		kexec_down_cpus++;
+
+		while (1);
+	}
+}
+
+static void mpc85xx_smp_kexec_down(void *arg)
+{
+	if (ppc_md.kexec_cpu_down)
+		ppc_md.kexec_cpu_down(0,1);
+}
+
+static void mpc85xx_smp_machine_kexec(struct kimage *image)
+{
+	int timeout = 2000;
+	int i;
+
+	set_cpus_allowed(current, cpumask_of_cpu(boot_cpuid));
+
+	smp_call_function(mpc85xx_smp_kexec_down, NULL, 0);
+
+	while ( (kexec_down_cpus != (num_online_cpus() - 1)) &&
+		( timeout > 0 ) )
+	{
+		timeout--;
+	}
+
+	if ( !timeout )
+		printk(KERN_ERR "Unable to bring down secondary cpu(s)");
+
+	for (i = 0; i < num_present_cpus(); i++)
+	{
+		if ( i == smp_processor_id() ) continue;
+		mpic_reset_core(i);
+	}
+
+	default_machine_kexec(image);
+}
+#endif /* CONFIG_KEXEC */
+
 void __init mpc85xx_smp_init(void)
 {
 	struct device_node *np;
@@ -124,4 +182,9 @@ void __init mpc85xx_smp_init(void)
 	BUG_ON(!smp_85xx_ops.message_pass);
 
 	smp_ops = &smp_85xx_ops;
+
+#ifdef CONFIG_KEXEC
+	ppc_md.kexec_cpu_down = mpc85xx_smp_kexec_cpu_down;
+	ppc_md.machine_kexec = mpc85xx_smp_machine_kexec;
+#endif
 }

arch/powerpc/platforms/85xx/tqm85xx.c

@@ -151,6 +151,27 @@ static void tqm85xx_show_cpuinfo(struct seq_file *m)
 	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
 }
 
+static void __init tqm85xx_ti1520_fixup(struct pci_dev *pdev)
+{
+	unsigned int val;
+
+	/* Do not do the fixup on other platforms! */
+	if (!machine_is(tqm85xx))
+		return;
+
+	dev_info(&pdev->dev, "Using TI 1520 fixup on TQM85xx\n");
+
+	/*
+	 * Enable P2CCLK bit in system control register
+	 * to enable CLOCK output to power chip
+	 */
+	pci_read_config_dword(pdev, 0x80, &val);
+	pci_write_config_dword(pdev, 0x80, val | (1 << 27));
+
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1520,
+		tqm85xx_ti1520_fixup);
+
 static struct of_device_id __initdata of_bus_ids[] = {
 	{ .compatible = "simple-bus", },
 	{ .compatible = "gianfar", },

arch/powerpc/platforms/8xx/Kconfig

@@ -55,6 +55,12 @@ config PPC_MGSUVD
 	help
 	  This enables support for the Keymile MGSUVD board.
 
+config TQM8XX
+	bool "TQM8XX"
+	select CPM1
+	help
+	  support for the mpc8xx based boards from TQM.
+
 endchoice
 
 menu "Freescale Ethernet driver platform-specific options"

arch/powerpc/platforms/8xx/Makefile

@@ -7,3 +7,4 @@ obj-$(CONFIG_MPC86XADS)   += mpc86xads_setup.o
 obj-$(CONFIG_PPC_EP88XC)  += ep88xc.o
 obj-$(CONFIG_PPC_ADDER875) += adder875.o
 obj-$(CONFIG_PPC_MGSUVD) += mgsuvd.o
+obj-$(CONFIG_TQM8XX)      += tqm8xx_setup.o

arch/powerpc/platforms/8xx/tqm8xx_setup.c

+/*
+ * Platform setup for the MPC8xx based boards from TQM.
+ *
+ * Heiko Schocher <hs@denx.de>
+ * Copyright 2010 DENX Software Engineering GmbH
+ *
+ * based on:
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * Copyright 2005 MontaVista Software Inc.
+ *
+ * Heavily modified by Scott Wood <scottwood@freescale.com>
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+
+#include <linux/fs_enet_pd.h>
+#include <linux/fs_uart_pd.h>
+#include <linux/fsl_devices.h>
+#include <linux/mii.h>
+#include <linux/of_platform.h>
+
+#include <asm/delay.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/page.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/mpc8xx.h>
+#include <asm/8xx_immap.h>
+#include <asm/cpm1.h>
+#include <asm/fs_pd.h>
+#include <asm/udbg.h>
+
+#include "mpc8xx.h"
+
+struct cpm_pin {
+	int port, pin, flags;
+};
+
+static struct __initdata cpm_pin tqm8xx_pins[] = {
+	/* SMC1 */
+	{CPM_PORTB, 24, CPM_PIN_INPUT}, /* RX */
+	{CPM_PORTB, 25, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */
+
+	/* SCC1 */
+	{CPM_PORTA, 5, CPM_PIN_INPUT}, /* CLK1 */
+	{CPM_PORTA, 7, CPM_PIN_INPUT}, /* CLK2 */
+	{CPM_PORTA, 14, CPM_PIN_INPUT}, /* TX */
+	{CPM_PORTA, 15, CPM_PIN_INPUT}, /* RX */
+	{CPM_PORTC, 15, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TENA */
+	{CPM_PORTC, 10, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO},
+	{CPM_PORTC, 11, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO},
+};
+
+static struct __initdata cpm_pin tqm8xx_fec_pins[] = {
+	/* MII */
+	{CPM_PORTD, 3, CPM_PIN_OUTPUT},
+	{CPM_PORTD, 4, CPM_PIN_OUTPUT},
+	{CPM_PORTD, 5, CPM_PIN_OUTPUT},
+	{CPM_PORTD, 6, CPM_PIN_OUTPUT},
+	{CPM_PORTD, 7, CPM_PIN_OUTPUT},
+	{CPM_PORTD, 8, CPM_PIN_OUTPUT},
+	{CPM_PORTD, 9, CPM_PIN_OUTPUT},
+	{CPM_PORTD, 10, CPM_PIN_OUTPUT},
+	{CPM_PORTD, 11, CPM_PIN_OUTPUT},
+	{CPM_PORTD, 12, CPM_PIN_OUTPUT},
+	{CPM_PORTD, 13, CPM_PIN_OUTPUT},
+	{CPM_PORTD, 14, CPM_PIN_OUTPUT},
+	{CPM_PORTD, 15, CPM_PIN_OUTPUT},
+};
+
+static void __init init_pins(int n, struct cpm_pin *pin)
+{
+	int i;
+
+	for (i = 0; i < n; i++) {
+		cpm1_set_pin(pin->port, pin->pin, pin->flags);
+		pin++;
+	}
+}
+
+static void __init init_ioports(void)
+{
+	struct device_node *dnode;
+	struct property *prop;
+	int	len;
+
+	init_pins(ARRAY_SIZE(tqm8xx_pins), &tqm8xx_pins[0]);
+
+	cpm1_clk_setup(CPM_CLK_SMC1, CPM_BRG1, CPM_CLK_RTX);
+
+	dnode = of_find_node_by_name(NULL, "aliases");
+	if (dnode == NULL)
+		return;
+	prop = of_find_property(dnode, "ethernet1", &len);
+	if (prop == NULL)
+		return;
+
+	/* init FEC pins */
+	init_pins(ARRAY_SIZE(tqm8xx_fec_pins), &tqm8xx_fec_pins[0]);
+}
+
+static void __init tqm8xx_setup_arch(void)
+{
+	cpm_reset();
+	init_ioports();
+}
+
+static int __init tqm8xx_probe(void)
+{
+	unsigned long node = of_get_flat_dt_root();
+
+	return of_flat_dt_is_compatible(node, "tqc,tqm8xx");
+}
+
+static struct of_device_id __initdata of_bus_ids[] = {
+	{ .name = "soc", },
+	{ .name = "cpm", },
+	{ .name = "localbus", },
+	{ .compatible = "simple-bus" },
+	{},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+	of_platform_bus_probe(NULL, of_bus_ids, NULL);
+
+	return 0;
+}
+machine_device_initcall(tqm8xx, declare_of_platform_devices);
+
+define_machine(tqm8xx) {
+	.name			= "TQM8xx",
+	.probe			= tqm8xx_probe,
+	.setup_arch		= tqm8xx_setup_arch,
+	.init_IRQ		= mpc8xx_pics_init,
+	.get_irq		= mpc8xx_get_irq,
+	.restart		= mpc8xx_restart,
+	.calibrate_decr		= mpc8xx_calibrate_decr,
+	.set_rtc_time		= mpc8xx_set_rtc_time,
+	.get_rtc_time		= mpc8xx_get_rtc_time,
+	.progress		= udbg_progress,
+};

arch/powerpc/sysdev/fsl_pci.c

@@ -412,6 +412,7 @@ DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P4080, quirk_fsl_pcie_header);
 #endif /* CONFIG_FSL_SOC_BOOKE || CONFIG_PPC_86xx */
 
 #if defined(CONFIG_PPC_83xx) || defined(CONFIG_PPC_MPC512x)
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8308, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8314E, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8314, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8315E, quirk_fsl_pcie_header);

include/linux/pci_ids.h

@@ -2264,6 +2264,7 @@
 #define PCI_DEVICE_ID_TDI_EHCI          0x0101
 
 #define PCI_VENDOR_ID_FREESCALE		0x1957
+#define PCI_DEVICE_ID_MPC8308		0xc006
 #define PCI_DEVICE_ID_MPC8315E		0x00b4
 #define PCI_DEVICE_ID_MPC8315		0x00b5
 #define PCI_DEVICE_ID_MPC8314E		0x00b6