Merge tag 'linux-can-fixes-for-4.17-20180508' of...

Merge tag 'linux-can-fixes-for-4.17-20180508' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2018-05-08

this is a pull request for 7 patches for net/master.

The first patch is by Jakob Unterwurzacher and increases the severity of
bus-off messages in the generic CAN device infrastructure. The next two patches
are by Uwe Kleine-König and fix the endianess detection in the flexcan driver.
Jimmy Assarsson's patch for the kvaser driver corrects the stats counter for
dropped tx-messages. Geert Uytterhoeven provides one patch and Sergei Shtylyov
two patches for the rcan_canfd device tree binding description.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/devicetree/bindings/net/can/rcar_canfd.txt

@@ -5,7 +5,9 @@ Required properties:
 - compatible: Must contain one or more of the following:
   - "renesas,rcar-gen3-canfd" for R-Car Gen3 compatible controller.
   - "renesas,r8a7795-canfd" for R8A7795 (R-Car H3) compatible controller.
-  - "renesas,r8a7796-canfd" for R8A7796 (R-Car M3) compatible controller.
+  - "renesas,r8a7796-canfd" for R8A7796 (R-Car M3-W) compatible controller.
+  - "renesas,r8a77970-canfd" for R8A77970 (R-Car V3M) compatible controller.
+  - "renesas,r8a77980-canfd" for R8A77980 (R-Car V3H) compatible controller.
 
   When compatible with the generic version, nodes must list the
   SoC-specific version corresponding to the platform first, followed by the

arch/arm/boot/dts/imx35.dtsi

@@ -303,7 +303,7 @@ wdog: wdog@53fdc000 {
 			};
 
 			can1: can@53fe4000 {
-				compatible = "fsl,imx35-flexcan";
+				compatible = "fsl,imx35-flexcan", "fsl,imx25-flexcan";
 				reg = <0x53fe4000 0x1000>;
 				clocks = <&clks 33>, <&clks 33>;
 				clock-names = "ipg", "per";
@@ -312,7 +312,7 @@ can1: can@53fe4000 {
 			};
 
 			can2: can@53fe8000 {
-				compatible = "fsl,imx35-flexcan";
+				compatible = "fsl,imx35-flexcan", "fsl,imx25-flexcan";
 				reg = <0x53fe8000 0x1000>;
 				clocks = <&clks 34>, <&clks 34>;
 				clock-names = "ipg", "per";

arch/arm/boot/dts/imx53.dtsi

@@ -551,7 +551,7 @@ uart2: serial@53fc0000 {
 			};
 
 			can1: can@53fc8000 {
-				compatible = "fsl,imx53-flexcan";
+				compatible = "fsl,imx53-flexcan", "fsl,imx25-flexcan";
 				reg = <0x53fc8000 0x4000>;
 				interrupts = <82>;
 				clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>,
@@ -561,7 +561,7 @@ can1: can@53fc8000 {
 			};
 
 			can2: can@53fcc000 {
-				compatible = "fsl,imx53-flexcan";
+				compatible = "fsl,imx53-flexcan", "fsl,imx25-flexcan";
 				reg = <0x53fcc000 0x4000>;
 				interrupts = <83>;
 				clocks = <&clks IMX5_CLK_CAN2_IPG_GATE>,

drivers/net/can/dev.c

@@ -605,7 +605,7 @@ void can_bus_off(struct net_device *dev)
 {
 	struct can_priv *priv = netdev_priv(dev);
 
-	netdev_dbg(dev, "bus-off\n");
+	netdev_info(dev, "bus-off\n");
 
 	netif_carrier_off(dev);
 

drivers/net/can/flexcan.c

@@ -200,6 +200,7 @@
 #define FLEXCAN_QUIRK_DISABLE_MECR	BIT(4) /* Disable Memory error detection */
 #define FLEXCAN_QUIRK_USE_OFF_TIMESTAMP	BIT(5) /* Use timestamp based offloading */
 #define FLEXCAN_QUIRK_BROKEN_PERR_STATE	BIT(6) /* No interrupt for error passive */
+#define FLEXCAN_QUIRK_DEFAULT_BIG_ENDIAN	BIT(7) /* default to BE register access */
 
 /* Structure of the message buffer */
 struct flexcan_mb {
@@ -287,6 +288,12 @@ struct flexcan_priv {
 };
 
 static const struct flexcan_devtype_data fsl_p1010_devtype_data = {
+	.quirks = FLEXCAN_QUIRK_BROKEN_WERR_STATE |
+		FLEXCAN_QUIRK_BROKEN_PERR_STATE |
+		FLEXCAN_QUIRK_DEFAULT_BIG_ENDIAN,
+};
+
+static const struct flexcan_devtype_data fsl_imx25_devtype_data = {
 	.quirks = FLEXCAN_QUIRK_BROKEN_WERR_STATE |
 		FLEXCAN_QUIRK_BROKEN_PERR_STATE,
 };
@@ -1251,9 +1258,9 @@ static void unregister_flexcandev(struct net_device *dev)
 static const struct of_device_id flexcan_of_match[] = {
 	{ .compatible = "fsl,imx6q-flexcan", .data = &fsl_imx6q_devtype_data, },
 	{ .compatible = "fsl,imx28-flexcan", .data = &fsl_imx28_devtype_data, },
-	{ .compatible = "fsl,imx53-flexcan", .data = &fsl_p1010_devtype_data, },
-	{ .compatible = "fsl,imx35-flexcan", .data = &fsl_p1010_devtype_data, },
-	{ .compatible = "fsl,imx25-flexcan", .data = &fsl_p1010_devtype_data, },
+	{ .compatible = "fsl,imx53-flexcan", .data = &fsl_imx25_devtype_data, },
+	{ .compatible = "fsl,imx35-flexcan", .data = &fsl_imx25_devtype_data, },
+	{ .compatible = "fsl,imx25-flexcan", .data = &fsl_imx25_devtype_data, },
 	{ .compatible = "fsl,p1010-flexcan", .data = &fsl_p1010_devtype_data, },
 	{ .compatible = "fsl,vf610-flexcan", .data = &fsl_vf610_devtype_data, },
 	{ .compatible = "fsl,ls1021ar2-flexcan", .data = &fsl_ls1021a_r2_devtype_data, },
@@ -1337,19 +1344,14 @@ static int flexcan_probe(struct platform_device *pdev)
 
 	priv = netdev_priv(dev);
 
-	if (of_property_read_bool(pdev->dev.of_node, "big-endian")) {
-		priv->read = flexcan_read_be;
-		priv->write = flexcan_write_be;
-	} else {
-		if (of_device_is_compatible(pdev->dev.of_node,
-					    "fsl,p1010-flexcan")) {
+	if (of_property_read_bool(pdev->dev.of_node, "big-endian") ||
+	    devtype_data->quirks & FLEXCAN_QUIRK_DEFAULT_BIG_ENDIAN) {
 		priv->read = flexcan_read_be;
 		priv->write = flexcan_write_be;
 	} else {
 		priv->read = flexcan_read_le;
 		priv->write = flexcan_write_le;
 	}
-	}
 
 	priv->can.clock.freq = clock_freq;
 	priv->can.bittiming_const = &flexcan_bittiming_const;

drivers/net/can/usb/kvaser_usb.c

@@ -1179,7 +1179,7 @@ static void kvaser_usb_rx_can_msg(const struct kvaser_usb *dev,
 
 	skb = alloc_can_skb(priv->netdev, &cf);
 	if (!skb) {
-		stats->tx_dropped++;
+		stats->rx_dropped++;
 		return;
 	}