Commit 433514fc authored by Tomasz Duszynski's avatar Tomasz Duszynski Committed by Jonathan Cameron

dt-bindings: iio: chemical: pms7003: convert bindings to yaml

Convert existing device tree bindings to yaml.
Signed-off-by: default avatarTomasz Duszynski <tduszyns@gmail.com>
Reviewed-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarJonathan Cameron <Jonathan.Cameron@huawei.com>
parent e59fc525
* Plantower PMS7003 particulate matter sensor
Required properties:
- compatible: must one of:
"plantower,pms1003"
"plantower,pms3003"
"plantower,pms5003"
"plantower,pms6003"
"plantower,pms7003"
"plantower,pmsa003"
- vcc-supply: phandle to the regulator that provides power to the sensor
Optional properties:
- plantower,set-gpios: phandle to the GPIO connected to the SET line
- reset-gpios: phandle to the GPIO connected to the RESET line
Refer to serial/slave-device.txt for generic serial attached device bindings.
Example:
&uart0 {
air-pollution-sensor {
compatible = "plantower,pms7003";
vcc-supply = <&reg_vcc5v0>;
};
};
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/iio/chemical/plantower,pms7003.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Plantower PMS7003 air pollution sensor
maintainers:
- Tomasz Duszynski <tduszyns@gmail.com>
description: |
Air pollution sensor capable of measuring mass concentration of dust
particles.
properties:
compatible:
enum:
- plantower,pms1003
- plantower,pms3003
- plantower,pms5003
- plantower,pms6003
- plantower,pms7003
- plantower,pmsa003
vcc-supply:
description: regulator that provides power to the sensor
maxItems: 1
plantower,set-gpios:
description: GPIO connected to the SET line
maxItems: 1
reset-gpios:
description: GPIO connected to the RESET line
maxItems: 1
required:
- compatible
- vcc-supply
examples:
- |
serial {
air-pollution-sensor {
compatible = "plantower,pms7003";
vcc-supply = <&reg_vcc5v0>;
};
};
...
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment