Commit 43d186fe authored by Aleksey Babahin's avatar Aleksey Babahin Committed by Greg Kroah-Hartman

USB: serial: add metro-usb driver to the tree

This driver is for the Metrologic barcode scanner.
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 33d2832a
/*
Date Created: 9/15/2006
File Name: metro-usb.c
Description: metro-usb.c is the drivers main source file. The driver is a USB to Serial converter.
The driver takes USB data and sends it to a virtual ttyUSB# serial port.
The driver interfaces with the usbserial.ko driver supplied by Linux.
NOTES:
To install the driver:
1. Install the usbserial.ko module supplied by Linux with: # insmod usbserial.ko
2. Install the metro-usb.ko module with: # insmod metro-usb.ko vender=0x#### product=0x#### debug=1
The vendor, product and debug parameters are optional.
Some of this code is credited to Linux USB open source files that are distributed with Linux.
Copyright: 2007 Metrologic Instruments. All rights reserved.
Copyright: 2011 Azimut Ltd. <http://azimutrzn.ru/>
Requirements: gedit.exe, notepad.exe
Revision History:
Date: Developer: Revisions:
------------------------------------------------------------------------------
1/30/2007 Philip Nicastro Initial release. (v1.0.0.0)
2/27/2007 Philip Nicastro Changed the metrousb_read_int_callback function to use a loop with the tty_insert_flip_char function to copy each byte to the tty layer. Removed the tty_buffer_request_room and the tty_insert_flip_string function calls. These calls were not supported on Fedora.
2/27/2007 Philip Nicastro Released. (v1.1.0.0)
10/07/2011 Aleksey Babahin Update for new kernel (tested on 2.6.38)
Add unidirection mode support
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/tty.h>
#include <linux/module.h>
#include <linux/usb.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/moduleparam.h>
#include <linux/spinlock.h>
#include <asm/uaccess.h>
#include <linux/errno.h>
#include "metro-usb.h"
#include <linux/usb/serial.h>
/* Version Information */
#define DRIVER_VERSION "v1.2.0.0"
#define DRIVER_DESC "Metrologic Instruments Inc. - USB-POS driver"
/* Device table list. */
static struct usb_device_id id_table [] = {
{ USB_DEVICE(FOCUS_VENDOR_ID, FOCUS_PRODUCT_ID) },
{ USB_DEVICE(FOCUS_VENDOR_ID, FOCUS_PRODUCT_ID_UNI) },
{ }, /* Optional paramenter entry. */
{ }, /* Terminating entry. */
};
MODULE_DEVICE_TABLE(usb, id_table);
/* Input parameter constants. */
static int debug;
static __u16 vendor;
static __u16 product;
/* Function prototypes. */
static void metrousb_cleanup (struct usb_serial_port *port);
static void metrousb_close (struct usb_serial_port *port);
static int metrousb_open (struct tty_struct *tty, struct usb_serial_port *port);
static void metrousb_read_int_callback (struct urb *urb);
static void metrousb_shutdown (struct usb_serial *serial);
static int metrousb_startup (struct usb_serial *serial);
static void metrousb_throttle(struct tty_struct *tty);
static int metrousb_tiocmget(struct tty_struct *tty);
static int metrousb_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear);
static void metrousb_unthrottle(struct tty_struct *tty);
/* Driver structure. */
static struct usb_driver metrousb_driver = {
.name = "metro-usb",
.probe = usb_serial_probe,
.disconnect = usb_serial_disconnect,
.id_table = id_table
};
/* Device structure. */
static struct usb_serial_driver metrousb_device = {
.driver = {
.owner = THIS_MODULE,
.name = "metro-usb",
},
.description = "Metrologic USB to serial converter.",
.id_table = id_table,
.usb_driver = &metrousb_driver,
.num_ports = 1,
.open = metrousb_open,
.close = metrousb_close,
.read_int_callback = metrousb_read_int_callback,
.attach = metrousb_startup,
.release = metrousb_shutdown,
.throttle = metrousb_throttle,
.unthrottle = metrousb_unthrottle,
.tiocmget = metrousb_tiocmget,
.tiocmset = metrousb_tiocmset,
};
/* ----------------------------------------------------------------------------------------------
Description:
Clean up any urbs and port information.
Input:
struct usb_serial_port *: pointer to a usb_serial_port structure.
Output:
int: Returns true (0) if successful, false otherwise.
*/
static void metrousb_cleanup (struct usb_serial_port *port)
{
dbg("METRO-USB - %s - port number=%d", __FUNCTION__, port->number);
if (port->serial->dev) {
/* Shutdown any interrupt in urbs. */
if (port->interrupt_in_urb) {
usb_unlink_urb(port->interrupt_in_urb);
usb_kill_urb(port->interrupt_in_urb);
}
// temp
// this will be needed for the write urb
/* Shutdown any interrupt_out_urbs. */
//if (serial->num_bulk_in)
// usb_kill_urb(port->read_urb);
}
}
/* ----------------------------------------------------------------------------------------------
Description:
Close the open serial port. Cleanup any open serial port information.
Input:
struct usb_serial_port *: pointer to a usb_serial_port structure.
struct file *: pointer to a file structure.
Output:
int: Returns true (0) if successful, false otherwise.
*/
static void metrousb_close (struct usb_serial_port *port)
{
dbg("METRO-USB - %s - port number=%d", __FUNCTION__, port->number);
metrousb_cleanup(port);
}
/* ----------------------------------------------------------------------------------------------
Description:
Driver exit.
Input:
None:
Output:
None:
*/
static void __exit metrousb_exit(void)
{
dbg("METRO-USB - %s", __FUNCTION__);
usb_deregister(&metrousb_driver);
usb_serial_deregister(&metrousb_device);
}
/* ----------------------------------------------------------------------------------------------
Description:
Driver initialization.
Input:
None:
Output:
int: Returns true (0) if successful, false otherwise.
*/
static int __init metrousb_init(void)
{
int retval = 0;
int i = 0;
dbg("METRO-USB - %s", __FUNCTION__);
/* Add the device parameters if entered. */
if ((vendor > 0) && (product > 0)) {
struct usb_device_id usb_dev_temp[] = { {USB_DEVICE(vendor, product) } };
/* Find the last entry in id_table */
for (i=0; i < ARRAY_SIZE(id_table); i++) {
if (id_table[i].idVendor == 0) {
id_table[i] = usb_dev_temp[0];
break;
}
}
dbg("METRO-USB - %s - support added for unknown device: vendor=0x%x - product=0x%x", __FUNCTION__, vendor, product);
printk(KERN_INFO "Metro USB-POS support added for unknown device: vendor=0x%x - product=0x%x", vendor, product);
}
/* Register the devices. */
retval = usb_serial_register(&metrousb_device);
if (retval)
return retval;
/* Register the driver. */
retval = usb_register(&metrousb_driver);
if (retval)
usb_serial_deregister(&metrousb_device);
printk(KERN_INFO DRIVER_DESC " : " DRIVER_VERSION);
return retval;
}
/* ----------------------------------------------------------------------------------------------
Description:
Open the drivers serial port.
Input:
struct usb_serial_port *: pointer to a usb_serial_port structure.
struct file *: pointer to a file structure.
Output:
int: Returns true (0) if successful, false otherwise.
*/
static int metrousb_open (struct tty_struct *tty, struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
struct metrousb_private *metro_priv = usb_get_serial_port_data(port);
unsigned long flags = 0;
int result = 0;
dbg("METRO-USB - %s - port number=%d", __FUNCTION__, port->number);
/* Make sure the urb is initialized. */
if (!port->interrupt_in_urb) {
dbg("METRO-USB - %s - interrupt urb not initialized for port number=%d", __FUNCTION__, port->number);
return -ENODEV;
}
/* Set the private data information for the port. */
spin_lock_irqsave(&metro_priv->lock, flags);
metro_priv->control_state = 0;
metro_priv->throttled = 0;
spin_unlock_irqrestore(&metro_priv->lock, flags);
/*
* Force low_latency on so that our tty_push actually forces the data
* through, otherwise it is scheduled, and with high data rates (like
* with OHCI) data can get lost.
*/
if (tty) {
tty->low_latency = 1;
}
/* Clear the urb pipe. */
usb_clear_halt(serial->dev, port->interrupt_in_urb->pipe);
/* Start reading from the device */
usb_fill_int_urb (port->interrupt_in_urb, serial->dev,
usb_rcvintpipe (serial->dev, port->interrupt_in_endpointAddress),
port->interrupt_in_urb->transfer_buffer,
port->interrupt_in_urb->transfer_buffer_length,
metrousb_read_int_callback, port, 1);
result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (result) {
dbg("METRO-USB - %s - failed submitting interrupt in urb for port number=%d, error code=%d"
, __FUNCTION__, port->number, result);
goto exit;
}
dbg("METRO-USB - %s - port open for port number=%d", __FUNCTION__, port->number);
exit:
return result;
}
/* ----------------------------------------------------------------------------------------------
Description:
Read the port from the read interrupt.
Input:
struct urb *: urb structure to get data.
struct pt_regs *: pt_regs structure.
Output:
None:
*/
static void metrousb_read_int_callback (struct urb *urb)
{
struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
struct metrousb_private *metro_priv = usb_get_serial_port_data(port);
struct tty_struct *tty;
unsigned char *data = urb->transfer_buffer;
int throttled = 0;
int result = 0;
unsigned long flags = 0;
dbg("METRO-USB - %s - port number=%d", __FUNCTION__, port->number);
switch (urb->status) {
case 0:
/* Success status, read from the port. */
break;
case -ECONNRESET:
case -ENOENT:
case -ESHUTDOWN:
/* urb has been terminated. */
dbg("METRO-USB - %s - urb shutting down, port number=%d, error code=%d",
__FUNCTION__, port->number, result);
return;
default:
dbg("METRO-USB - %s - non-zero urb received, port number=%d, error code=%d",
__FUNCTION__, port->number, result);
goto exit;
}
/* Set the data read from the usb port into the serial port buffer. */
tty = tty_port_tty_get(&port->port);
if (!tty) {
dbg("%s - bad tty pointer - exiting", __func__);
return;
}
if (tty && urb->actual_length) {
// Loop through the data copying each byte to the tty layer.
tty_insert_flip_string(tty, data, urb->actual_length);
// Force the data to the tty layer.
tty_flip_buffer_push(tty);
}
tty_kref_put(tty);
/* Set any port variables. */
spin_lock_irqsave(&metro_priv->lock, flags);
throttled = metro_priv->throttled;
spin_unlock_irqrestore(&metro_priv->lock, flags);
/* Continue trying to read if set. */
if (!throttled) {
usb_fill_int_urb (port->interrupt_in_urb, port->serial->dev,
usb_rcvintpipe (port->serial->dev, port->interrupt_in_endpointAddress),
port->interrupt_in_urb->transfer_buffer,
port->interrupt_in_urb->transfer_buffer_length,
metrousb_read_int_callback, port, 1);
result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
if (result) {
dbg("METRO-USB - %s - failed submitting interrupt in urb for port number=%d, error code=%d",
__FUNCTION__, port->number, result);
}
}
return;
exit:
/* Try to resubmit the urb. */
result = usb_submit_urb (urb, GFP_ATOMIC);
if (result) {
dbg("METRO-USB - %s - failed submitting interrupt in urb for port number=%d, error code=%d",
__FUNCTION__, port->number, result);
}
}
/* ----------------------------------------------------------------------------------------------
Description:
Set the modem control state for the entered serial port.
Input:
struct usb_serial_port *: pointer to a usb_serial_port structure.
unsigned int: control state value to set.
Output:
int: Returns true (0) if successful, false otherwise.
*/
static int metrousb_set_modem_ctrl(struct usb_serial *serial, unsigned int control_state)
{
int retval = 0;
unsigned char mcr = METROUSB_MCR_NONE;
dbg("METRO-USB - %s - control state=%d", __FUNCTION__, control_state);
/* Set the modem control value. */
if (control_state & TIOCM_DTR)
mcr |= METROUSB_MCR_DTR;
if (control_state & TIOCM_RTS)
mcr |= METROUSB_MCR_RTS;
/* Send the command to the usb port. */
retval = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
METROUSB_SET_REQUEST_TYPE, METROUSB_SET_MODEM_CTRL_REQUEST,
control_state, 0, NULL, 0, WDR_TIMEOUT);
if (retval < 0)
dbg("METRO-USB - %s - set modem ctrl=0x%x failed, error code=%d", __FUNCTION__, mcr, retval);
return retval;
}
/* ----------------------------------------------------------------------------------------------
Description:
Shutdown the driver.
Input:
struct usb_serial *: pointer to a usb-serial structure.
Output:
int: Returns true (0) if successful, false otherwise.
*/
static void metrousb_shutdown (struct usb_serial *serial)
{
int i = 0;
dbg("METRO-USB - %s", __FUNCTION__);
/* Stop reading and writing on all ports. */
for (i=0; i < serial->num_ports; ++i) {
/* Close any open urbs. */
metrousb_cleanup(serial->port[i]);
/* Free memory. */
kfree(usb_get_serial_port_data(serial->port[i]));
usb_set_serial_port_data(serial->port[i], NULL);
dbg("METRO-USB - %s - freed port number=%d", __FUNCTION__, serial->port[i]->number);
}
}
/* ----------------------------------------------------------------------------------------------
Description:
Startup the driver.
Input:
struct usb_serial *: pointer to a usb-serial structure.
Output:
int: Returns true (0) if successful, false otherwise.
*/
static int metrousb_startup(struct usb_serial *serial)
{
struct metrousb_private *metro_priv;
struct usb_serial_port *port;
int i = 0;
dbg("METRO-USB - %s", __FUNCTION__);
/* Loop through the serial ports setting up the private structures.
* Currently we only use one port. */
for (i = 0; i < serial->num_ports; ++i) {
port = serial->port[i];
/* Declare memory. */
metro_priv = (struct metrousb_private *) kmalloc (sizeof(struct metrousb_private), GFP_KERNEL);
if (!metro_priv)
return -ENOMEM;
/* Clear memory. */
memset (metro_priv, 0x00, sizeof(struct metrousb_private));
/* Initialize memory. */
spin_lock_init(&metro_priv->lock);
usb_set_serial_port_data(port, metro_priv);
dbg("METRO-USB - %s - port number=%d.", __FUNCTION__, port->number);
}
return 0;
}
/* ----------------------------------------------------------------------------------------------
Description:
Set the serial port throttle to stop reading from the port.
Input:
struct usb_serial_port *: pointer to a usb_serial_port structure.
Output:
None:
*/
static void metrousb_throttle (struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct metrousb_private *metro_priv = usb_get_serial_port_data(port);
unsigned long flags = 0;
dbg("METRO-USB - %s - port number=%d", __FUNCTION__, port->number);
/* Set the private information for the port to stop reading data. */
spin_lock_irqsave(&metro_priv->lock, flags);
metro_priv->throttled = 1;
spin_unlock_irqrestore(&metro_priv->lock, flags);
}
/* ----------------------------------------------------------------------------------------------
Description:
Get the serial port control line states.
Input:
struct usb_serial_port *: pointer to a usb_serial_port structure.
struct file *: pointer to a file structure.
Output:
int: Returns the state of the control lines.
*/
static int metrousb_tiocmget (struct tty_struct *tty)
{
unsigned long control_state = 0;
struct usb_serial_port *port = tty->driver_data;
struct metrousb_private *metro_priv = usb_get_serial_port_data(port);
unsigned long flags = 0;
dbg("METRO-USB - %s - port number=%d", __FUNCTION__, port->number);
spin_lock_irqsave(&metro_priv->lock, flags);
control_state = metro_priv->control_state;
spin_unlock_irqrestore(&metro_priv->lock, flags);
return control_state;
}
/* ----------------------------------------------------------------------------------------------
Description:
Set the serial port control line states.
Input:
struct usb_serial_port *: pointer to a usb_serial_port structure.
struct file *: pointer to a file structure.
unsigned int: line state to set.
unsigned int: line state to clear.
Output:
int: Returns the state of the control lines.
*/
static int metrousb_tiocmset (struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
struct usb_serial_port *port = tty->driver_data;
struct usb_serial *serial = port->serial;
struct metrousb_private *metro_priv = usb_get_serial_port_data(port);
unsigned long flags = 0;
unsigned long control_state = 0;
dbg("METRO-USB - %s - port number=%d, set=%d, clear=%d", __FUNCTION__, port->number, set, clear);
spin_lock_irqsave(&metro_priv->lock, flags);
control_state = metro_priv->control_state;
// Set the RTS and DTR values.
if (set & TIOCM_RTS)
control_state |= TIOCM_RTS;
if (set & TIOCM_DTR)
control_state |= TIOCM_DTR;
if (clear & TIOCM_RTS)
control_state &= ~TIOCM_RTS;
if (clear & TIOCM_DTR)
control_state &= ~TIOCM_DTR;
metro_priv->control_state = control_state;
spin_unlock_irqrestore(&metro_priv->lock, flags);
return metrousb_set_modem_ctrl(serial, control_state);
}
/* ----------------------------------------------------------------------------------------------
Description:
Set the serial port unthrottle to resume reading from the port.
Input:
struct usb_serial_port *: pointer to a usb_serial_port structure.
Output:
None:
*/
static void metrousb_unthrottle (struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct metrousb_private *metro_priv = usb_get_serial_port_data(port);
unsigned long flags = 0;
int result = 0;
dbg("METRO-USB - %s - port number=%d", __FUNCTION__, port->number);
/* Set the private information for the port to resume reading data. */
spin_lock_irqsave(&metro_priv->lock, flags);
metro_priv->throttled = 0;
spin_unlock_irqrestore(&metro_priv->lock, flags);
/* Submit the urb to read from the port. */
port->interrupt_in_urb->dev = port->serial->dev;
result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
if (result) {
dbg("METRO-USB - %s - failed submitting interrupt in urb for port number=%d, error code=%d",
__FUNCTION__, port->number, result);
}
}
/* Standard module function. */
module_init(metrousb_init);
module_exit(metrousb_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR( "Philip Nicastro" );
MODULE_AUTHOR( "Aleksey Babahin <tamerlan311@gmail.com>" );
MODULE_DESCRIPTION( DRIVER_DESC );
/* Module input parameters */
module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Print debug info (bool 1=on, 0=off)");
module_param(vendor, ushort, 0);
MODULE_PARM_DESC(vendor, "User specified vendor ID (ushort)");
module_param(product, ushort, 0);
MODULE_PARM_DESC(product, "User specified product ID (ushort)");
/*
Date Created: 1/12/2007
File Name: metro-usb.h
Description: metro-usb.h is the drivers header file. The driver is a USB to Serial converter.
The driver takes USB data and sends it to a virtual ttyUSB# serial port.
The driver interfaces with the usbserial.ko driver supplied by Linux.
NOTES:
To install the driver:
1. Install the usbserial.ko module supplied by Linux with: # insmod usbserial.ko
2. Install the metro-usb.ko module with: # insmod metro-usb.ko vender=0x#### product=0x#### debug=1
The vendor, product and debug parameters are optional.
Copyright: 2007 Metrologic Instruments. All rights reserved.
Copyright: 2011 Azimut Ltd. <http://azimutrzn.ru/>
Requirements: Notepad.exe
Revision History:
Date: Developer: Revisions:
------------------------------------------------------------------------------
1/12/2007 Philip Nicastro Initial release. (v1.0.0.0)
10/07/2011 Aleksey Babahin Update for new kernel (tested on 2.6.38)
Add unidirection mode support
*/
#ifndef __LINUX_USB_SERIAL_METRO
#define __LINUX_USB_SERIAL_METRO
/* Product information. */
#define FOCUS_VENDOR_ID 0x0C2E
#define FOCUS_PRODUCT_ID 0x0720
#define FOCUS_PRODUCT_ID_UNI 0x0710
#define METROUSB_SET_REQUEST_TYPE 0x40
#define METROUSB_SET_MODEM_CTRL_REQUEST 10
#define METROUSB_SET_BREAK_REQUEST 0x40
#define METROUSB_MCR_NONE 0x8 /* Deactivate DTR and RTS. */
#define METROUSB_MCR_RTS 0xa /* Activate RTS. */
#define METROUSB_MCR_DTR 0x9 /* Activate DTR. */
#define WDR_TIMEOUT 5000 /* default urb timeout. */
/* Private data structure. */
struct metrousb_private {
spinlock_t lock;
int throttled;
unsigned long control_state;
};
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment