ARM: dts: move the pwm_ab and pwm_cd nodes to meson.dtsi

According to the vendor kernel sources these also exist (at the same
address) on Meson6 and Meson8. This can be found by running
$ grep -R "define PWM_PWM_[A-D]" arch/arm/
in the Amlogic GPL kernel tree (arm-src-kernel-2015-01-15-321cfb5a46).
pwm_ef does not seem to exist on older SoCs, so we keep it in
meson8b.dtsi for now.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

arch/arm/boot/dts/meson.dtsi

@@ -108,6 +108,20 @@ i2c_A: i2c@8500 {
 				status = "disabled";
 			};
 
+			pwm_ab: pwm@8550 {
+				compatible = "amlogic,meson-pwm";
+				reg = <0x8550 0x10>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			pwm_cd: pwm@8650 {
+				compatible = "amlogic,meson-pwm";
+				reg = <0x8650 0x10>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
 			saradc: adc@8680 {
 				compatible = "amlogic,meson-saradc";
 				reg = <0x8680 0x34>;

arch/arm/boot/dts/meson8b.dtsi

@@ -129,20 +129,6 @@ reset: reset-controller@4404 {
 		#reset-cells = <1>;
 	};
 
-	pwm_ab: pwm@8550 {
-		compatible = "amlogic,meson8b-pwm";
-		reg = <0x8550 0x10>;
-		#pwm-cells = <3>;
-		status = "disabled";
-	};
-
-	pwm_cd: pwm@8650 {
-		compatible = "amlogic,meson8b-pwm";
-		reg = <0x8650 0x10>;
-		#pwm-cells = <3>;
-		status = "disabled";
-	};
-
 	pwm_ef: pwm@86c0 {
 		compatible = "amlogic,meson8b-pwm";
 		reg = <0x86c0 0x10>;
@@ -193,6 +179,14 @@ &L2 {
 	arm,filter-ranges = <0x100000 0xc0000000>;
 };
 
+&pwm_ab {
+	compatible = "amlogic,meson8b-pwm";
+};
+
+&pwm_cd {
+	compatible = "amlogic,meson8b-pwm";
+};
+
 &saradc {
 	compatible = "amlogic,meson8b-saradc", "amlogic,meson-saradc";
 	clocks = <&clkc CLKID_XTAL>,