Skip to content

L
linux
Commit 44598f98 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc 

Pull ARM SoC board updates from Olof Johansson:
 "Board updates for 3.12.  Again, a bit of domain overlap with SoC and
  DT branches, but most of this is around legacy code and board support.
  We've found that platform maintainers have a hard time separating all
  of these out and might move towards fewer branches for next release.

   - Removal of a number of Marvell Kirkwood board files, since contents
     is now common and mostly configured via DT.
   - Device-tree updates for Marvell Dove, including irqchip and
     clocksource setup.
   - Defconfig updates.  Gotta go somewhere.  One new one for Renesas
     Lager.
   - New backlight drivers for backlights used on Renesas shmobile
     platforms.
   - Removal of Renesas leds driver.
   - Shuffling of some of the new Broadcom platforms to give room for
     others in the same mach directory.  More in 3.13"

* tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (67 commits)
  mmc: sdhci-bcm-kona: Staticize sdhci_bcm_kona_card_event
  mmc: sdhci-bcm-kona: Remove unneeded version.h inclusion
  ARM: bcm: Make secure API call optional
  ARM: DT: binding fixup to align with vendor-prefixes.txt (drivers)
  ARM: mmc: fix NONREMOVABLE test in sdhci-bcm-kona
  ARM: bcm: Rename board_bcm
  mmc: sdhci-bcm-kona: make linker-section warning go away
  ARM: tegra: defconfig updates
  ARM: dove: add initial DT file for Globalscale D2Plug
  ARM: dove: add GPIO IR receiver node to SolidRun CuBox
  ARM: dove: add common pinmux functions to DT
  ARM: dove: add cpu device tree node
  ARM: dove: update dove_defconfig with SI5351, PCI, and xHCI
  arch/arm/mach-kirkwood: Avoid using ARRAY_AND_SIZE(e) as a function argument
  ARM: kirkwood: fix DT building and update defconfig
  ARM: kirkwood: Remove all remaining trace of DNS-320/325 platform code
  ARM: configs: disable DEBUG_LL in bcm_defconfig
  ARM: bcm281xx: Board specific reboot code
  ARM bcm281xx: Turn on socket & network support.
  ARM: bcm281xx: Turn on L2 cache.
  ...
parents b4b50fd7 4e5f67fa
Expand all Show whitespace changes
Inline Side-by-side
Showing with 2416 additions and 3040 deletions
arch/arm/boot/dts/Makefile
View file @ 44598f98
......@@ -48,6 +48,7 @@ dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \
da850-evm.dtb
dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \
dove-cubox.dtb \
dove-d2plug.dtb \
dove-dove-db.dtb
dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
exynos4210-smdkv310.dtb \
......@@ -85,6 +86,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
kirkwood-lschlv2.dtb \
kirkwood-lsxhl.dtb \
kirkwood-mplcec4.dtb \
kirkwood-mv88f6281gtw-ge.dtb \
kirkwood-netgear_readynas_duo_v2.dtb \
kirkwood-ns2.dtb \
kirkwood-ns2lite.dtb \
......
arch/arm/boot/dts/dove-cubox.dts
View file @ 44598f98
......@@ -42,6 +42,8 @@ usb_power: regulator@1 {
regulator-always-on;
regulator-boot-on;
gpio = <&gpio0 1 0>;
pinctrl-0 = <&pmx_gpio_1>;
pinctrl-names = "default";
};
};
......@@ -53,10 +55,24 @@ ref25: oscillator {
clock-frequency = <25000000>;
};
};
ir_recv: ir-receiver {
compatible = "gpio-ir-receiver";
gpios = <&gpio0 19 1>;
pinctrl-0 = <&pmx_gpio_19>;
pinctrl-names = "default";
};
};
&uart0 { status = "okay"; };
&sata0 { status = "okay"; };
&mdio { status = "okay"; };
&eth { status = "okay"; };
&ethphy {
compatible = "marvell,88e1310";
reg = <1>;
};
&i2c0 {
status = "okay";
......@@ -103,6 +119,7 @@ &sdio0 {
status = "okay";
/* sdio0 card detect is connected to wrong pin on CuBox */
cd-gpios = <&gpio0 12 1>;
pinctrl-0 = <&pmx_sdio0 &pmx_gpio_12>;
};
&spi0 {
......@@ -115,23 +132,3 @@ spi-flash@0 {
reg = <0>;
};
};
&pinctrl {
pinctrl-0 = <&pmx_gpio_1 &pmx_gpio_12>;
pinctrl-names = "default";
pmx_gpio_1: pmx-gpio-1 {
marvell,pins = "mpp1";
marvell,function = "gpio";
};
pmx_gpio_12: pmx-gpio-12 {
marvell,pins = "mpp12";
marvell,function = "gpio";
};
pmx_gpio_18: pmx-gpio-18 {
marvell,pins = "mpp18";
marvell,function = "gpio";
};
};
arch/arm/boot/dts/dove-d2plug.dts 0 → 100644
View file @ 44598f98
/dts-v1/;
/include/ "dove.dtsi"
/ {
model = "Globalscale D2Plug";
compatible = "globalscale,d2plug", "marvell,dove";
memory {
device_type = "memory";
reg = <0x00000000 0x40000000>;
};
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&pmx_gpio_0 &pmx_gpio_1 &pmx_gpio_2>;
pinctrl-names = "default";
wlan-ap {
label = "wlan-ap";
gpios = <&gpio0 0 1>;
};
wlan-act {
label = "wlan-act";
gpios = <&gpio0 1 1>;
};
bluetooth-act {
label = "bt-act";
gpios = <&gpio0 2 1>;
};
};
};
&uart0 { status = "okay"; };
&sata0 { status = "okay"; };
&i2c0 { status = "okay"; };
&mdio { status = "okay"; };
&eth { status = "okay"; };
/* Samsung M8G2F eMMC */
&sdio0 {
status = "okay";
non-removable;
bus-width = <4>;
};
/* Marvell SD8787 WLAN/BT */
&sdio1 {
status = "okay";
non-removable;
bus-width = <4>;
};
&spi0 {
status = "okay";
/* spi0.0: 4M Flash Macronix MX25L3205D */
spi-flash@0 {
compatible = "st,m25l3205d";
spi-max-frequency = <20000000>;
reg = <0>;
};
};
arch/arm/boot/dts/dove.dtsi
View file @ 44598f98
......@@ -10,6 +10,23 @@ aliases {
gpio2 = &gpio2;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
compatible = "marvell,pj4a", "marvell,sheeva-v7";
device_type = "cpu";
next-level-cache = <&l2>;
reg = <0>;
};
};
l2: l2-cache {
compatible = "marvell,tauros2-cache";
marvell,tauros2-cache-features = <0>;
};
soc@f1000000 {
compatible = "simple-bus";
#address-cells = <1>;
......@@ -25,16 +42,28 @@ soc@f1000000 {
0xf2100000 0xf2100000 0x0100000 /* PCIe0 I/O 1M */
0xf8000000 0xf8000000 0x8000000>; /* BootROM 128M */
l2: l2-cache {
compatible = "marvell,tauros2-cache";
marvell,tauros2-cache-features = <0>;
timer: timer@20300 {
compatible = "marvell,orion-timer";
reg = <0x20300 0x20>;
interrupt-parent = <&bridge_intc>;
interrupts = <1>, <2>;
clocks = <&core_clk 0>;
};
intc: interrupt-controller {
intc: main-interrupt-ctrl@20200 {
compatible = "marvell,orion-intc";
interrupt-controller;
#interrupt-cells = <1>;
reg = <0x20204 0x04>, <0x20214 0x04>;
reg = <0x20200 0x10>, <0x20210 0x10>;
};
bridge_intc: bridge-interrupt-ctrl@20110 {
compatible = "marvell,orion-bridge-intc";
interrupt-controller;
#interrupt-cells = <1>;
reg = <0x20110 0x8>;
interrupts = <0>;
marvell,#interrupts = <5>;
};
core_clk: core-clocks@d0214 {
......@@ -43,14 +72,14 @@ core_clk: core-clocks@d0214 {
#clock-cells = <1>;
};
gate_clk: clock-gating-control@d0038 {
gate_clk: clock-gating-ctrl@d0038 {
compatible = "marvell,dove-gating-clock";
reg = <0xd0038 0x4>;
clocks = <&core_clk 0>;
#clock-cells = <1>;
};
thermal: thermal@d001c {
thermal: thermal-diode@d001c {
compatible = "marvell,dove-thermal";
reg = <0xd001c 0x0c>, <0xd005c 0x08>;
};
......@@ -70,6 +99,8 @@ uart1: serial@12100 {
reg-shift = <2>;
interrupts = <8>;
clocks = <&core_clk 0>;
pinctrl-0 = <&pmx_uart1>;
pinctrl-names = "default";
status = "disabled";
};
......@@ -91,7 +122,7 @@ uart3: serial@12300 {
status = "disabled";
};
gpio0: gpio@d0400 {
gpio0: gpio-ctrl@d0400 {
compatible = "marvell,orion-gpio";
#gpio-cells = <2>;
gpio-controller;
......@@ -102,7 +133,7 @@ gpio0: gpio@d0400 {
interrupts = <12>, <13>, <14>, <60>;
};
gpio1: gpio@d0420 {
gpio1: gpio-ctrl@d0420 {
compatible = "marvell,orion-gpio";
#gpio-cells = <2>;
gpio-controller;
......@@ -113,7 +144,7 @@ gpio1: gpio@d0420 {
interrupts = <61>;
};
gpio2: gpio@e8400 {
gpio2: gpio-ctrl@e8400 {
compatible = "marvell,orion-gpio";
#gpio-cells = <2>;
gpio-controller;
......@@ -121,13 +152,188 @@ gpio2: gpio@e8400 {
ngpios = <8>;
};
pinctrl: pinctrl@d0200 {
pinctrl: pin-ctrl@d0200 {
compatible = "marvell,dove-pinctrl";
reg = <0xd0200 0x10>;
clocks = <&gate_clk 22>;
pmx_gpio_0: pmx-gpio-0 {
marvell,pins = "mpp0";
marvell,function = "gpio";
};
pmx_gpio_1: pmx-gpio-1 {
marvell,pins = "mpp1";
marvell,function = "gpio";
};
pmx_gpio_2: pmx-gpio-2 {
marvell,pins = "mpp2";
marvell,function = "gpio";
};
pmx_gpio_3: pmx-gpio-3 {
marvell,pins = "mpp3";
marvell,function = "gpio";
};
pmx_gpio_4: pmx-gpio-4 {
marvell,pins = "mpp4";
marvell,function = "gpio";
};
pmx_gpio_5: pmx-gpio-5 {
marvell,pins = "mpp5";
marvell,function = "gpio";
};
pmx_gpio_6: pmx-gpio-6 {
marvell,pins = "mpp6";
marvell,function = "gpio";
};
pmx_gpio_7: pmx-gpio-7 {
marvell,pins = "mpp7";
marvell,function = "gpio";
};
pmx_gpio_8: pmx-gpio-8 {
marvell,pins = "mpp8";
marvell,function = "gpio";
};
pmx_gpio_9: pmx-gpio-9 {
marvell,pins = "mpp9";
marvell,function = "gpio";
};
pmx_gpio_10: pmx-gpio-10 {
marvell,pins = "mpp10";
marvell,function = "gpio";
};
pmx_gpio_11: pmx-gpio-11 {
marvell,pins = "mpp11";
marvell,function = "gpio";
};
pmx_gpio_12: pmx-gpio-12 {
marvell,pins = "mpp12";
marvell,function = "gpio";
};
pmx_gpio_13: pmx-gpio-13 {
marvell,pins = "mpp13";
marvell,function = "gpio";
};
pmx_gpio_14: pmx-gpio-14 {
marvell,pins = "mpp14";
marvell,function = "gpio";
};
pmx_gpio_15: pmx-gpio-15 {
marvell,pins = "mpp15";
marvell,function = "gpio";
};
pmx_gpio_16: pmx-gpio-16 {
marvell,pins = "mpp16";
marvell,function = "gpio";
};
spi0: spi@10600 {
pmx_gpio_17: pmx-gpio-17 {
marvell,pins = "mpp17";
marvell,function = "gpio";
};
pmx_gpio_18: pmx-gpio-18 {
marvell,pins = "mpp18";
marvell,function = "gpio";
};
pmx_gpio_19: pmx-gpio-19 {
marvell,pins = "mpp19";
marvell,function = "gpio";
};
pmx_gpio_20: pmx-gpio-20 {
marvell,pins = "mpp20";
marvell,function = "gpio";
};
pmx_gpio_21: pmx-gpio-21 {
marvell,pins = "mpp21";
marvell,function = "gpio";
};
pmx_camera: pmx-camera {
marvell,pins = "mpp_camera";
marvell,function = "camera";
};
pmx_camera_gpio: pmx-camera-gpio {
marvell,pins = "mpp_camera";
marvell,function = "gpio";
};
pmx_sdio0: pmx-sdio0 {
marvell,pins = "mpp_sdio0";
marvell,function = "sdio0";
};
pmx_sdio0_gpio: pmx-sdio0-gpio {
marvell,pins = "mpp_sdio0";
marvell,function = "gpio";
};
pmx_sdio1: pmx-sdio1 {
marvell,pins = "mpp_sdio1";
marvell,function = "sdio1";
};
pmx_sdio1_gpio: pmx-sdio1-gpio {
marvell,pins = "mpp_sdio1";
marvell,function = "gpio";
};
pmx_audio1_gpio: pmx-audio1-gpio {
marvell,pins = "mpp_audio1";
marvell,function = "gpio";
};
pmx_spi0: pmx-spi0 {
marvell,pins = "mpp_spi0";
marvell,function = "spi0";
};
pmx_spi0_gpio: pmx-spi0-gpio {
marvell,pins = "mpp_spi0";
marvell,function = "gpio";
};
pmx_uart1: pmx-uart1 {
marvell,pins = "mpp_uart1";
marvell,function = "uart1";
};
pmx_uart1_gpio: pmx-uart1-gpio {
marvell,pins = "mpp_uart1";
marvell,function = "gpio";
};
pmx_nand: pmx-nand {
marvell,pins = "mpp_nand";
marvell,function = "nand";
};
pmx_nand_gpo: pmx-nand-gpo {
marvell,pins = "mpp_nand";
marvell,function = "gpo";
};
};
spi0: spi-ctrl@10600 {
compatible = "marvell,orion-spi";
#address-cells = <1>;
#size-cells = <0>;
......@@ -135,10 +341,12 @@ spi0: spi@10600 {
interrupts = <6>;
reg = <0x10600 0x28>;
clocks = <&core_clk 0>;
pinctrl-0 = <&pmx_spi0>;
pinctrl-names = "default";
status = "disabled";
};
spi1: spi@14600 {
spi1: spi-ctrl@14600 {
compatible = "marvell,orion-spi";
#address-cells = <1>;
#size-cells = <0>;
......@@ -149,7 +357,7 @@ spi1: spi@14600 {
status = "disabled";
};
i2c0: i2c@11000 {
i2c0: i2c-ctrl@11000 {
compatible = "marvell,mv64xxx-i2c";
reg = <0x11000 0x20>;
#address-cells = <1>;
......@@ -177,23 +385,27 @@ ehci1: usb-host@51000 {
status = "okay";
};
sdio0: sdio@92000 {
sdio0: sdio-host@92000 {
compatible = "marvell,dove-sdhci";
reg = <0x92000 0x100>;
interrupts = <35>, <37>;
clocks = <&gate_clk 8>;
pinctrl-0 = <&pmx_sdio0>;
pinctrl-names = "default";
status = "disabled";
};
sdio1: sdio@90000 {
sdio1: sdio-host@90000 {
compatible = "marvell,dove-sdhci";
reg = <0x90000 0x100>;
interrupts = <36>, <38>;
clocks = <&gate_clk 9>;
pinctrl-0 = <&pmx_sdio1>;
pinctrl-names = "default";
status = "disabled";
};
sata0: sata@a0000 {
sata0: sata-host@a0000 {
compatible = "marvell,orion-sata";
reg = <0xa0000 0x2400>;
interrupts = <62>;
......@@ -202,12 +414,12 @@ sata0: sata@a0000 {
status = "disabled";
};
rtc@d8500 {
rtc: real-time-clock@d8500 {
compatible = "marvell,orion-rtc";
reg = <0xd8500 0x20>;
};
crypto: crypto@30000 {
crypto: crypto-engine@30000 {
compatible = "marvell,orion-crypto";
reg = <0x30000 0x10000>,
<0xc8000000 0x800>;
......@@ -258,5 +470,40 @@ channel1 {
dmacap,xor;
};
};
mdio: mdio-bus@72004 {
compatible = "marvell,orion-mdio";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x72004 0x84>;
interrupts = <30>;
clocks = <&gate_clk 2>;
status = "disabled";
ethphy: ethernet-phy {
device-type = "ethernet-phy";
/* set phy address in board file */
};
};
eth: ethernet-controller@72000 {
compatible = "marvell,orion-eth";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x72000 0x4000>;
clocks = <&gate_clk 2>;
marvell,tx-checksum-limit = <1600>;
status = "disabled";
ethernet-port@0 {
device_type = "network";
compatible = "marvell,orion-eth-port";
reg = <0>;
interrupts = <29>;
/* overwrite MAC address in bootloader */
local-mac-address = [00 00 00 00 00 00];
phy-handle = <&ethphy>;
};
};
};
};
arch/arm/boot/dts/kirkwood-cloudbox.dts
View file @ 44598f98
......@@ -89,3 +89,19 @@ gpio_poweroff {
gpios = <&gpio0 17 0>;
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@0 {
device_type = "ethernet-phy";
reg = <0>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};
arch/arm/boot/dts/kirkwood-db.dtsi
View file @ 44598f98
......@@ -79,3 +79,19 @@ mvsdio@90000 {
};
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@8 {
device_type = "ethernet-phy";
reg = <8>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};
arch/arm/boot/dts/kirkwood-dnskw.dtsi
View file @ 44598f98
......@@ -219,3 +219,19 @@ sata1_power: regulator@2 {
};
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@8 {
device_type = "ethernet-phy";
reg = <8>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};
arch/arm/boot/dts/kirkwood-dockstar.dts
View file @ 44598f98
......@@ -90,3 +90,20 @@ usb_power: regulator@1 {
};
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@0 {
device_type = "ethernet-phy";
compatible = "marvell,88e1116";
reg = <0>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};
arch/arm/boot/dts/kirkwood-dreamplug.dts
View file @ 44598f98
......@@ -99,3 +99,31 @@ wifi-ap {
};
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@0 {
device_type = "ethernet-phy";
reg = <0>;
};
ethphy1: ethernet-phy@1 {
device_type = "ethernet-phy";
reg = <1>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};
&eth1 {
status = "okay";
ethernet1-port@0 {
phy-handle = <&ethphy1>;
};
};
arch/arm/boot/dts/kirkwood-goflexnet.dts
View file @ 44598f98
......@@ -170,3 +170,19 @@ usb_power: regulator@1 {
};
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@0 {
device_type = "ethernet-phy";
reg = <0>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};
arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts
View file @ 44598f98
......@@ -96,3 +96,33 @@ wmode-g {
};
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@0 {
device_type = "ethernet-phy";
compatible = "marvell,88e1121";
reg = <0>;
};
ethphy1: ethernet-phy@1 {
device_type = "ethernet-phy";
compatible = "marvell,88e1121";
reg = <1>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};
&eth1 {
status = "okay";
ethernet1-port@0 {
phy-handle = <&ethphy1>;
};
};
arch/arm/boot/dts/kirkwood-ib62x0.dts
View file @ 44598f98
......@@ -122,3 +122,19 @@ gpio_poweroff {
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@8 {
device_type = "ethernet-phy";
reg = <8>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};
arch/arm/boot/dts/kirkwood-iconnect.dts
View file @ 44598f98
......@@ -179,3 +179,19 @@ button@2 {
};
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@11 {
device_type = "ethernet-phy";
reg = <11>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};
arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
View file @ 44598f98
......@@ -194,3 +194,27 @@ OTB {
};
};
};
&mdio {
status = "okay";
ethphy1: ethernet-phy@11 {
device_type = "ethernet-phy";
reg = <11>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
speed = <1000>;
duplex = <1>;
};
};
&eth1 {
status = "okay";
ethernet1-port@0 {
phy-handle = <&ethphy1>;
};
};
arch/arm/boot/dts/kirkwood-is2.dts
View file @ 44598f98
......@@ -30,3 +30,5 @@ blue-sata {
};
};
};
&ethphy0 { reg = <8>; };
arch/arm/boot/dts/kirkwood-km_kirkwood.dts
View file @ 44598f98
......@@ -50,3 +50,19 @@ i2c@0 {
i2c-gpio,delay-us = <2>; /* ~100 kHz */
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@0 {
device_type = "ethernet-phy";
reg = <0>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};
arch/arm/boot/dts/kirkwood-lsxl.dtsi
View file @ 44598f98
......@@ -207,3 +207,31 @@ hdd_power: regulator@2 {
};
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@0 {
device_type = "ethernet-phy";
reg = <0>;
};
ethphy1: ethernet-phy@8 {
device_type = "ethernet-phy";
reg = <8>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};
&eth1 {
status = "okay";
ethernet1-port@0 {
phy-handle = <&ethphy1>;
};
};
arch/arm/boot/dts/kirkwood-mplcec4.dts
View file @ 44598f98
......@@ -194,3 +194,30 @@ misc {
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@1 {
device_type = "ethernet-phy";
reg = <1>;
};
ethphy1: ethernet-phy@2 {
device_type = "ethernet-phy";
reg = <2>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};
&eth1 {
status = "okay";
ethernet1-port@0 {
phy-handle = <&ethphy1>;
};
};
arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts 0 → 100644
View file @ 44598f98
/*
* Marvell 88F6281 GTW GE Board
*
* Lennert Buytenhek <buytenh@marvell.com>
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*
* This file contains the definitions that are common between the 6281
* and 6282 variants of the Marvell Kirkwood Development Board.
*/
/dts-v1/;
#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"
/ {
model = "Marvell 88F6281 GTW GE Board";
compatible = "marvell,mv88f6281gtw-ge", "marvell,kirkwood-88f6281", "marvell,kirkwood";
memory {
device_type = "memory";
reg = <0x00000000 0x20000000>; /* 512 MB */
};
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
};
ocp@f1000000 {
pinctrl@10000 {
pmx_usb_led: pmx-usb-led {
marvell,pins = "mpp12";
marvell,function = "gpo";
};
pmx_leds: pmx-leds {
marvell,pins = "mpp20", "mpp21";
marvell,function = "gpio";
};
pmx_keys: pmx-keys {
marvell,pins = "mpp46", "mpp47";
marvell,function = "gpio";
};
};
spi@10600 {
pinctrl-0 = <&pmx_spi>;
pinctrl-names = "default";
status = "okay";
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "mx25l12805d";
reg = <0>;
spi-max-frequency = <50000000>;
mode = <0>;
};
};
serial@12000 {
pinctrl-0 = <&pmx_uart0>;
pinctrl-names = "default";
clock-frequency = <200000000>;
status = "ok";
};
ehci@50000 {
status = "okay";
};
pcie-controller {
status = "okay";
pcie@1,0 {
status = "okay";
};
};
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-0 = <&pmx_leds &pmx_usb_led>;
pinctrl-names = "default";
green-status {
label = "gtw:green:Status";
gpios = <&gpio0 20 0>;
};
red-status {
label = "gtw:red:Status";
gpios = <&gpio0 21 0>;
};
green-usb {
label = "gtw:green:USB";
gpios = <&gpio0 12 0>;
};
};
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&pmx_keys>;
pinctrl-names = "default";
button@1 {
label = "SWR Button";
linux,code = <0x198>; /* KEY_RESTART */
gpios = <&gpio1 15 1>;
};
button@2 {
label = "WPS Button";
linux,code = <0x211>; /* KEY_WPS_BUTTON */
gpios = <&gpio1 14 1>;
};
};
};
arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts
View file @ 44598f98
......@@ -207,3 +207,19 @@ usb_power: regulator@1 {
};
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@0 {
device_type = "ethernet-phy";
reg = <0>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};
arch/arm/boot/dts/kirkwood-ns2-common.dtsi
View file @ 44598f98
......@@ -84,3 +84,19 @@ gpio_poweroff {
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy {
device_type = "ethernet-phy";
/* overwrite reg property in board file */
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};
arch/arm/boot/dts/kirkwood-ns2.dts
View file @ 44598f98
......@@ -30,3 +30,5 @@ blue-sata {
};
};
};
&ethphy0 { reg = <8>; };
arch/arm/boot/dts/kirkwood-ns2lite.dts
View file @ 44598f98
......@@ -30,3 +30,5 @@ blue-sata {
};
};
};
&ethphy0 { reg = <0>; };
arch/arm/boot/dts/kirkwood-ns2max.dts
View file @ 44598f98
......@@ -49,3 +49,5 @@ blue-sata {
};
};
};
&ethphy0 { reg = <8>; };
arch/arm/boot/dts/kirkwood-ns2mini.dts
View file @ 44598f98
......@@ -50,3 +50,5 @@ blue-sata {
};
};
};
&ethphy0 { reg = <0>; };
arch/arm/boot/dts/kirkwood-openblocks_a6.dts
View file @ 44598f98
......@@ -166,3 +166,19 @@ button@1 {
};
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@0 {
device_type = "ethernet-phy";
reg = <0>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};
arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
View file @ 44598f98
......@@ -91,3 +91,19 @@ usb_power: regulator@1 {
};
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@0 {
device_type = "ethernet-phy";
reg = <0>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};
arch/arm/boot/dts/kirkwood-topkick.dts
View file @ 44598f98
......@@ -203,3 +203,19 @@ sata0_power: regulator@1 {
};
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@0 {
device_type = "ethernet-phy";
reg = <0>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};
arch/arm/boot/dts/kirkwood-ts219-6281.dts
View file @ 44598f98
......@@ -51,3 +51,5 @@ button@2 {
};
};
};
&ethphy0 { reg = <8>; };
arch/arm/boot/dts/kirkwood-ts219-6282.dts
View file @ 44598f98
......@@ -62,3 +62,5 @@ button@2 {
};
};
};
&ethphy0 { reg = <0>; };
arch/arm/boot/dts/kirkwood-ts219.dtsi
View file @ 44598f98
......@@ -99,3 +99,19 @@ sata@80000 {
};
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy {
device_type = "ethernet-phy";
/* overwrite reg property in board file */
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};
arch/arm/boot/dts/kirkwood.dtsi
View file @ 44598f98
......@@ -22,13 +22,6 @@ aliases {
gpio0 = &gpio0;
gpio1 = &gpio1;
};
intc: interrupt-controller {
compatible = "marvell,orion-intc", "marvell,intc";
interrupt-controller;
#interrupt-cells = <1>;
reg = <0xf1020204 0x04>,
<0xf1020214 0x04>;
};
mbus {
compatible = "marvell,kirkwood-mbus", "simple-bus";
......@@ -52,6 +45,30 @@ mbusc: mbus-controller@20000 {
reg = <0x20000 0x80>, <0x1500 0x20>;
};
timer: timer@20300 {
compatible = "marvell,orion-timer";
reg = <0x20300 0x20>;
interrupt-parent = <&bridge_intc>;
interrupts = <1>, <2>;
clocks = <&core_clk 0>;
};
intc: main-interrupt-ctrl@20200 {
compatible = "marvell,orion-intc";
interrupt-controller;
#interrupt-cells = <1>;
reg = <0x20200 0x10>, <0x20210 0x10>;
};
bridge_intc: bridge-interrupt-ctrl@20110 {
compatible = "marvell,orion-bridge-intc";
interrupt-controller;
#interrupt-cells = <1>;
reg = <0x20110 0x8>;
interrupts = <1>;
marvell,#interrupts = <6>;
};
core_clk: core-clocks@10030 {
compatible = "marvell,kirkwood-core-clock";
reg = <0x10030 0x4>;
......@@ -118,9 +135,11 @@ gate_clk: clock-gating-control@2011c {
#clock-cells = <1>;
};
wdt@20300 {
wdt: watchdog-timer@20300 {
compatible = "marvell,orion-wdt";
reg = <0x20300 0x28>;
interrupt-parent = <&bridge_intc>;
interrupts = <3>;
clocks = <&gate_clk 7>;
status = "okay";
};
......@@ -207,5 +226,57 @@ crypto@30000 {
clocks = <&gate_clk 17>;
status = "okay";
};
mdio: mdio-bus@72004 {
compatible = "marvell,orion-mdio";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x72004 0x84>;
interrupts = <46>;
clocks = <&gate_clk 0>;
status = "disabled";
/* add phy nodes in board file */
};
eth0: ethernet-controller@72000 {
compatible = "marvell,kirkwood-eth";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x72000 0x4000>;
clocks = <&gate_clk 0>;
marvell,tx-checksum-limit = <1600>;
status = "disabled";
ethernet0-port@0 {
device_type = "network";
compatible = "marvell,kirkwood-eth-port";
reg = <0>;
interrupts = <11>;
/* overwrite MAC address in bootloader */
local-mac-address = [00 00 00 00 00 00];
/* set phy-handle property in board file */
};
};
eth1: ethernet-controller@76000 {
compatible = "marvell,kirkwood-eth";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x76000 0x4000>;
clocks = <&gate_clk 19>;
marvell,tx-checksum-limit = <1600>;
status = "disabled";
ethernet1-port@0 {
device_type = "network";
compatible = "marvell,kirkwood-eth-port";
reg = <0>;
interrupts = <15>;
/* overwrite MAC address in bootloader */
local-mac-address = [00 00 00 00 00 00];
/* set phy-handle property in board file */
};
};
};
};
arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts
View file @ 44598f98
......@@ -53,3 +53,20 @@ led@1 {
};
};
};
&mdio {
status = "okay";
ethphy: ethernet-phy {
device-type = "ethernet-phy";
reg = <8>;
};
};
&eth {
status = "okay";
ethernet-port@0 {
phy-handle = <&ethphy>;
};
};
arch/arm/boot/dts/orion5x.dtsi
View file @ 44598f98
......@@ -16,11 +16,12 @@ / {
aliases {
gpio0 = &gpio0;
};
intc: interrupt-controller {
compatible = "marvell,orion-intc", "marvell,intc";
compatible = "marvell,orion-intc";
interrupt-controller;
#interrupt-cells = <1>;
reg = <0xf1020204 0x04>;
reg = <0xf1020200 0x08>;
};
ocp@f1000000 {
......@@ -132,5 +133,34 @@ crypto@90000 {
interrupts = <28>;
status = "okay";
};
mdio: mdio-bus@72004 {
compatible = "marvell,orion-mdio";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x72004 0x84>;
interrupts = <22>;
status = "disabled";
/* add phy nodes in board file */
};
eth: ethernet-controller@72000 {
compatible = "marvell,orion-eth";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x72000 0x4000>;
marvell,tx-checksum-limit = <1600>;
status = "disabled";
ethernet-port@0 {
device_type = "network";
compatible = "marvell,orion-eth-port";
reg = <0>;
/* overwrite MAC address in bootloader */
local-mac-address = [00 00 00 00 00 00];
/* set phy-handle property in board file */
};
};
};
};
arch/arm/configs/ape6evm_defconfig
View file @ 44598f98
......@@ -54,7 +54,8 @@ CONFIG_NETDEVICES=y
CONFIG_SMC91X=y
CONFIG_SMSC911X=y
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
CONFIG_INPUT_EVDEV=y
CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_SERIAL_NONSTANDARD=y
......@@ -71,6 +72,9 @@ CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_GPIO=y
# CONFIG_HID is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
# CONFIG_IOMMU_SUPPORT is not set
# CONFIG_DNOTIFY is not set
CONFIG_TMPFS=y
......
arch/arm/configs/bcm_defconfig
View file @ 44598f98
......@@ -42,6 +42,18 @@ CONFIG_VFP=y
CONFIG_NEON=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_PM_RUNTIME=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=y
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=y
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_ARPD=y
CONFIG_SYN_COOKIES=y
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_PROC_DEVICETREE=y
......@@ -112,7 +124,6 @@ CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=110
CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
CONFIG_DEBUG_INFO=y
# CONFIG_FTRACE is not set
CONFIG_DEBUG_LL=y
CONFIG_CRC_CCITT=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
......
arch/arm/configs/dove_defconfig
View file @ 44598f98
......@@ -13,6 +13,9 @@ CONFIG_ARCH_DOVE=y
CONFIG_MACH_DOVE_DB=y
CONFIG_MACH_CM_A510=y
CONFIG_MACH_DOVE_DT=y
CONFIG_PCI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MVEBU=y
CONFIG_AEABI=y
CONFIG_HIGHMEM=y
CONFIG_ZBOOT_ROM_TEXT=0x0
......@@ -78,6 +81,7 @@ CONFIG_SPI_ORION=y
CONFIG_THERMAL=y
CONFIG_DOVE_THERMAL=y
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_STORAGE=y
......
arch/arm/configs/kirkwood_defconfig
View file @ 44598f98
......@@ -10,49 +10,18 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_KIRKWOOD=y
CONFIG_MACH_D2NET_V2=y
CONFIG_MACH_DB88F6281_BP=y
CONFIG_MACH_DOCKSTAR=y
CONFIG_MACH_ESATA_SHEEVAPLUG=y
CONFIG_MACH_GURUPLUG=y
CONFIG_MACH_INETSPACE_V2=y
CONFIG_MACH_MV88F6281GTW_GE=y
CONFIG_MACH_NET2BIG_V2=y
CONFIG_MACH_NET5BIG_V2=y
CONFIG_MACH_NETSPACE_MAX_V2=y
CONFIG_MACH_NETSPACE_V2=y
CONFIG_MACH_OPENRD_BASE=y
CONFIG_MACH_OPENRD_CLIENT=y
CONFIG_MACH_OPENRD_ULTIMATE=y
CONFIG_MACH_RD88F6192_NAS=y
CONFIG_MACH_RD88F6281=y
CONFIG_MACH_SHEEVAPLUG=y
CONFIG_MACH_T5325=y
CONFIG_MACH_TS219=y
CONFIG_MACH_TS41X=y
CONFIG_MACH_CLOUDBOX_DT=y
CONFIG_MACH_DB88F628X_BP_DT=y
CONFIG_MACH_DLINK_KIRKWOOD_DT=y
CONFIG_MACH_DOCKSTAR_DT=y
CONFIG_MACH_DREAMPLUG_DT=y
CONFIG_MACH_GOFLEXNET_DT=y
CONFIG_MACH_GURUPLUG_DT=y
CONFIG_MACH_IB62X0_DT=y
CONFIG_MACH_ICONNECT_DT=y
CONFIG_MACH_INETSPACE_V2_DT=y
CONFIG_MACH_IOMEGA_IX2_200_DT=y
CONFIG_MACH_KM_KIRKWOOD_DT=y
CONFIG_MACH_LSXL_DT=y
CONFIG_MACH_MPLCEC4_DT=y
CONFIG_MACH_NETSPACE_LITE_V2_DT=y
CONFIG_MACH_NETSPACE_MAX_V2_DT=y
CONFIG_MACH_NETSPACE_MINI_V2_DT=y
CONFIG_MACH_NETSPACE_V2_DT=y
CONFIG_MACH_NSA310_DT=y
CONFIG_MACH_OPENBLOCKS_A6_DT=y
CONFIG_MACH_READYNAS_DT=y
CONFIG_MACH_SHEEVAPLUG_DT=y
CONFIG_MACH_TOPKICK_DT=y
CONFIG_MACH_TS219_DT=y
CONFIG_ARCH_KIRKWOOD_DT=y
CONFIG_MACH_MV88F6281GTW_GE_DT=y
# CONFIG_CPU_FEROCEON_OLD_ID is not set
CONFIG_PCI_MVEBU=y
CONFIG_PREEMPT=y
......@@ -92,6 +61,7 @@ CONFIG_MTD_M25P80=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ORION=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_EEPROM_AT24=y
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=m
......@@ -100,9 +70,9 @@ CONFIG_ATA=y
CONFIG_SATA_AHCI=y
CONFIG_SATA_MV=y
CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_DSA_MV88E6123_61_65=y
CONFIG_MV643XX_ETH=y
CONFIG_R8169=y
CONFIG_MARVELL_PHY=y
CONFIG_LIBERTAS=y
CONFIG_LIBERTAS_SDIO=y
......@@ -123,9 +93,11 @@ CONFIG_I2C_MV64XXX=y
CONFIG_SPI=y
CONFIG_SPI_ORION=y
CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set
CONFIG_SENSORS_ADT7475=y
CONFIG_SENSORS_LM63=y
CONFIG_SENSORS_LM75=y
CONFIG_SENSORS_LM85=y
CONFIG_THERMAL=y
CONFIG_KIRKWOOD_THERMAL=y
CONFIG_WATCHDOG=y
CONFIG_ORION_WATCHDOG=y
CONFIG_HID_DRAGONRISE=y
......@@ -164,6 +136,8 @@ CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_RS5C372=y
CONFIG_RTC_DRV_PCF8563=y
CONFIG_RTC_DRV_S35390A=y
CONFIG_RTC_DRV_MV=y
CONFIG_DMADEVICES=y
......@@ -171,6 +145,7 @@ CONFIG_MV_XOR=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_EXT4_FS=y
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_UDF_FS=m
......@@ -186,12 +161,12 @@ CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_UTF8=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_DEBUG_INFO=y
# CONFIG_FTRACE is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y
......
arch/arm/configs/lager_defconfig 0 → 100644
View file @ 44598f98
CONFIG_SYSVIPC=y
CONFIG_NO_HZ=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y
CONFIG_SLAB=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_SHMOBILE=y
CONFIG_ARCH_R8A7790=y
CONFIG_MACH_LAGER=y
# CONFIG_SH_TIMER_TMU is not set
# CONFIG_EM_TIMER_STI is not set
CONFIG_ARM_ERRATA_430973=y
CONFIG_ARM_ERRATA_458693=y
CONFIG_ARM_ERRATA_460075=y
CONFIG_ARM_ERRATA_743622=y
CONFIG_ARM_ERRATA_754322=y
CONFIG_HAVE_ARM_ARCH_TIMER=y
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
CONFIG_KEXEC=y
CONFIG_AUTO_ZRELADDR=y
CONFIG_VFP=y
CONFIG_NEON=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_PM_RUNTIME=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
# CONFIG_WIRELESS is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_NETDEVICES=y
# CONFIG_NET_CORE is not set
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_CADENCE is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_CIRRUS is not set
# CONFIG_NET_VENDOR_FARADAY is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
CONFIG_SH_ETH=y
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_WLAN is not set
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=10
CONFIG_SERIAL_SH_SCI_CONSOLE=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_GPIO=y
CONFIG_I2C_SH_MOBILE=y
CONFIG_GPIO_SH_PFC=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_RCAR=y
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
CONFIG_RCAR_THERMAL=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
CONFIG_MMC_SDHI=y
CONFIG_MMC_SH_MMCIF=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_RTC_CLASS=y
CONFIG_DMADEVICES=y
CONFIG_SH_DMAE=y
# CONFIG_IOMMU_SUPPORT is not set
# CONFIG_DNOTIFY is not set
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_CONFIGFS_FS=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_NFS_FS=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFS_V4_1=y
CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
# CONFIG_ARM_UNWIND is not set
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
arch/arm/configs/marzen_defconfig
View file @ 44598f98
......@@ -29,6 +29,7 @@ CONFIG_AEABI=y
CONFIG_HIGHMEM=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
CONFIG_CMDLINE="console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel root=/dev/nfs ip=on"
CONFIG_CMDLINE_FORCE=y
CONFIG_KEXEC=y
......
arch/arm/configs/mvebu_defconfig
View file @ 44598f98
......@@ -39,6 +39,8 @@ CONFIG_MVNETA=y
CONFIG_MARVELL_PHY=y
CONFIG_MWIFIEX=y
CONFIG_MWIFIEX_SDIO=y
CONFIG_INPUT_EVDEV=y
CONFIG_KEYBOARD_GPIO=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_I2C=y
......
arch/arm/configs/tegra_defconfig
View file @ 44598f98
CONFIG_SYSVIPC=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
......@@ -26,8 +27,11 @@ CONFIG_ARCH_TEGRA=y
CONFIG_ARCH_TEGRA_2x_SOC=y
CONFIG_ARCH_TEGRA_3x_SOC=y
CONFIG_ARCH_TEGRA_114_SOC=y
CONFIG_TEGRA_PCI=y
CONFIG_TEGRA_EMC_SCALING_ENABLE=y
CONFIG_PCI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_TEGRA=y
CONFIG_PCIEPORTBUS=y
CONFIG_SMP=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
......@@ -92,6 +96,7 @@ CONFIG_ISL29003=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=y
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
......@@ -106,6 +111,7 @@ CONFIG_RT2800USB=m
CONFIG_INPUT_EVDEV=y
CONFIG_KEYBOARD_GPIO=y
CONFIG_KEYBOARD_TEGRA=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_MPU3050=y
# CONFIG_LEGACY_PTYS is not set
......@@ -178,6 +184,7 @@ CONFIG_SND_SOC_TEGRA_WM8903=y
CONFIG_SND_SOC_TEGRA_TRIMSLICE=y
CONFIG_SND_SOC_TEGRA_ALC5632=y
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_TEGRA=y
CONFIG_USB_ACM=y
......
arch/arm/mach-bcm/Kconfig
View file @ 44598f98
......@@ -12,6 +12,7 @@ config ARCH_BCM
select GPIO_BCM
select SPARSE_IRQ
select TICK_ONESHOT
select CACHE_L2X0
help
This enables support for system based on Broadcom SoCs.
It currently supports the 'BCM281XX' family, which includes
......
arch/arm/mach-bcm/Makefile
View file @ 44598f98
#
# Copyright (C) 2012 Broadcom Corporation
# Copyright (C) 2012-2013 Broadcom Corporation
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
......@@ -10,6 +10,6 @@
# of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
obj-$(CONFIG_ARCH_BCM) := board_bcm.o bcm_kona_smc.o bcm_kona_smc_asm.o
obj-$(CONFIG_ARCH_BCM) := board_bcm281xx.o bcm_kona_smc.o bcm_kona_smc_asm.o kona.o
plus_sec := $(call as-instr,.arch_extension sec,+sec)
AFLAGS_bcm_kona_smc_asm.o :=-Wa,-march=armv7-a$(plus_sec)
arch/arm/mach-bcm/bcm_kona_smc.c
View file @ 44598f98
......@@ -36,18 +36,20 @@ struct bcm_kona_smc_data {
};
static const struct of_device_id bcm_kona_smc_ids[] __initconst = {
{.compatible = "bcm,kona-smc"},
{.compatible = "brcm,kona-smc"},
{.compatible = "bcm,kona-smc"}, /* deprecated name */
{},
};
/* Map in the bounce area */
void __init bcm_kona_smc_init(void)
int __init bcm_kona_smc_init(void)
{
struct device_node *node;
/* Read buffer addr and size from the device tree node */
node = of_find_matching_node(NULL, bcm_kona_smc_ids);
BUG_ON(!node);
if (!node)
return -ENODEV;
/* Don't care about size or flags of the DT node */
bridge_data.buffer_addr =
......@@ -59,7 +61,9 @@ void __init bcm_kona_smc_init(void)
bridge_data.initialized = 1;
pr_info("Secure API initialized!\n");
pr_info("Kona Secure API initialized\n");
return 0;
}
/* __bcm_kona_smc() should only run on CPU 0, with pre-emption disabled */
......
arch/arm/mach-bcm/bcm_kona_smc.h
View file @ 44598f98
......@@ -64,7 +64,7 @@
#define SSAPI_BRCM_START_VC_CORE 0x0E000008
#ifndef __ASSEMBLY__
extern void bcm_kona_smc_init(void);
extern int __init bcm_kona_smc_init(void);
extern unsigned bcm_kona_smc(unsigned service_id,
unsigned arg0,
......
arch/arm/mach-bcm/board_bcm.c → arch/arm/mach-bcm/board_bcm281xx.c
View file @ 44598f98
/*
* Copyright (C) 2012 Broadcom Corporation
* Copyright (C) 2012-2013 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
......@@ -21,23 +21,39 @@
#include <asm/mach/time.h>
#include <asm/hardware/cache-l2x0.h>
#include "bcm_kona_smc.h"
#include "kona.h"
static int __init kona_l2_cache_init(void)
{
if (!IS_ENABLED(CONFIG_CACHE_L2X0))
return 0;
if (bcm_kona_smc_init() < 0) {
pr_info("Kona secure API not available. Skipping L2 init\n");
return 0;
}
bcm_kona_smc(SSAPI_ENABLE_L2_CACHE, 0, 0, 0, 0);
/*
* The aux_val and aux_mask have no effect since L2 cache is already
* enabled. Pass 0s for aux_val and 1s for aux_mask for default value.
*/
l2x0_of_init(0, ~0);
return l2x0_of_init(0, ~0);
}
return 0;
static void bcm_board_setup_restart(void)
{
struct device_node *np;
np = of_find_compatible_node(NULL, NULL, "brcm,bcm11351");
if (np) {
if (of_device_is_available(np))
bcm_kona_setup_restart();
of_node_put(np);
}
/* Restart setup for other boards goes here */
}
static void __init board_init(void)
......@@ -45,15 +61,15 @@ static void __init board_init(void)
of_platform_populate(NULL, of_default_bus_match_table, NULL,
&platform_bus);
bcm_kona_smc_init();
bcm_board_setup_restart();
kona_l2_cache_init();
}
static const char * const bcm11351_dt_compat[] = { "bcm,bcm11351", NULL, };
static const char * const bcm11351_dt_compat[] = { "brcm,bcm11351", NULL, };
DT_MACHINE_START(BCM11351_DT, "Broadcom Application Processor")
.init_time = clocksource_of_init,
.init_machine = board_init,
.restart = bcm_kona_restart,
.dt_compat = bcm11351_dt_compat,
MACHINE_END
arch/arm/mach-bcm/kona.c 0 → 100644
View file @ 44598f98
/*
* Copyright (C) 2013 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/of_address.h>
#include <asm/io.h>
#include "kona.h"
static void __iomem *watchdog_base;
void bcm_kona_setup_restart(void)
{
struct device_node *np_wdog;
/*
* The assumption is that whoever calls bcm_kona_setup_restart()
* also needs a Kona Watchdog Timer entry in Device Tree, i.e. we
* report an error if the DT entry is missing.
*/
np_wdog = of_find_compatible_node(NULL, NULL, "brcm,kona-wdt");
if (!np_wdog) {
pr_err("brcm,kona-wdt not found in DT, reboot disabled\n");
return;
}
watchdog_base = of_iomap(np_wdog, 0);
WARN(!watchdog_base, "failed to map watchdog base");
of_node_put(np_wdog);
}
#define SECWDOG_OFFSET 0x00000000
#define SECWDOG_RESERVED_MASK 0xE2000000
#define SECWDOG_WD_LOAD_FLAG_MASK 0x10000000
#define SECWDOG_EN_MASK 0x08000000
#define SECWDOG_SRSTEN_MASK 0x04000000
#define SECWDOG_CLKS_SHIFT 20
#define SECWDOG_LOCK_SHIFT 0
void bcm_kona_restart(enum reboot_mode mode, const char *cmd)
{
uint32_t val;
if (!watchdog_base)
panic("Watchdog not mapped. Reboot failed.\n");
/* Enable watchdog2 with very short timeout. */
val = readl(watchdog_base + SECWDOG_OFFSET);
val &= SECWDOG_RESERVED_MASK | SECWDOG_WD_LOAD_FLAG_MASK;
val |= SECWDOG_EN_MASK | SECWDOG_SRSTEN_MASK |
(0x8 << SECWDOG_CLKS_SHIFT) |
(0x8 << SECWDOG_LOCK_SHIFT);
writel(val, watchdog_base + SECWDOG_OFFSET);
while (1)
;
}
arch/arm/mach-bcm/kona.h 0 → 100644
View file @ 44598f98
/*
* Copyright (C) 2013 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/reboot.h>
void bcm_kona_setup_restart(void);
void bcm_kona_restart(enum reboot_mode mode, const char *cmd);
arch/arm/mach-dove/Kconfig
View file @ 44598f98
......@@ -23,6 +23,8 @@ config MACH_CM_A510
config MACH_DOVE_DT
bool "Marvell Dove Flattened Device Tree"
select DOVE_CLK
select ORION_IRQCHIP
select ORION_TIMER
select REGULATOR
select REGULATOR_FIXED_VOLTAGE
select USE_OF
......
arch/arm/mach-dove/Makefile
View file @ 44598f98
obj-y += common.o irq.o
obj-$(CONFIG_DOVE_LEGACY) += mpp.o
obj-y += common.o
obj-$(CONFIG_DOVE_LEGACY) += irq.o mpp.o
obj-$(CONFIG_PCI) += pcie.o
obj-$(CONFIG_MACH_DOVE_DB) += dove-db-setup.o
obj-$(CONFIG_MACH_DOVE_DT) += board-dt.o
......
arch/arm/mach-dove/board-dt.c
View file @ 44598f98
......@@ -10,11 +10,14 @@
#include <linux/init.h>
#include <linux/clk-provider.h>
#include <linux/clocksource.h>
#include <linux/irqchip.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/platform_data/usb-ehci-orion.h>
#include <asm/hardware/cache-tauros2.h>
#include <asm/mach/arch.h>
#include <mach/dove.h>
#include <mach/pm.h>
#include <plat/common.h>
#include <plat/irq.h>
......@@ -33,10 +36,6 @@ static void __init dove_legacy_clk_init(void)
clkspec.np = np;
clkspec.args_count = 1;
clkspec.args[0] = CLOCK_GATING_BIT_GBE;
orion_clkdev_add(NULL, "mv643xx_eth_port.0",
of_clk_get_from_provider(&clkspec));
clkspec.args[0] = CLOCK_GATING_BIT_PCIE0;
orion_clkdev_add("0", "pcie",
of_clk_get_from_provider(&clkspec));
......@@ -46,15 +45,18 @@ static void __init dove_legacy_clk_init(void)
of_clk_get_from_provider(&clkspec));
}
static void __init dove_of_clk_init(void)
static void __init dove_dt_time_init(void)
{
of_clk_init(NULL);
dove_legacy_clk_init();
clocksource_of_init();
}
static struct mv643xx_eth_platform_data dove_dt_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR_DEFAULT,
};
static void __init dove_dt_init_early(void)
{
mvebu_mbus_init("marvell,dove-mbus",
BRIDGE_WINS_BASE, BRIDGE_WINS_SZ,
DOVE_MC_WINS_BASE, DOVE_MC_WINS_SZ);
}
static void __init dove_dt_init(void)
{
......@@ -65,11 +67,10 @@ static void __init dove_dt_init(void)
#endif
dove_setup_cpu_wins();
/* Setup root of clk tree */
dove_of_clk_init();
/* Setup clocks for legacy devices */
dove_legacy_clk_init();
/* Internal devices not ported to DT yet */
dove_ge00_init(&dove_dt_ge00_data);
dove_pcie_init(1, 1);
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
......@@ -82,9 +83,8 @@ static const char * const dove_dt_board_compat[] = {
DT_MACHINE_START(DOVE_DT, "Marvell Dove (Flattened Device Tree)")
.map_io = dove_map_io,
.init_early = dove_init_early,
.init_irq = orion_dt_init_irq,
.init_time = dove_timer_init,
.init_early = dove_dt_init_early,
.init_time = dove_dt_time_init,
.init_machine = dove_dt_init,
.restart = dove_restart,
.dt_compat = dove_dt_board_compat,
......
arch/arm/mach-kirkwood/Kconfig
View file @ 44598f98
......@@ -2,67 +2,32 @@ if ARCH_KIRKWOOD
menu "Marvell Kirkwood Implementations"
config KIRKWOOD_LEGACY
bool
config MACH_D2NET_V2
bool "LaCie d2 Network v2 NAS Board"
select KIRKWOOD_LEGACY
help
Say 'Y' here if you want your kernel to support the
LaCie d2 Network v2 NAS.
config MACH_DOCKSTAR
bool "Seagate FreeAgent DockStar"
help
Say 'Y' here if you want your kernel to support the
Seagate FreeAgent DockStar.
config MACH_ESATA_SHEEVAPLUG
bool "Marvell eSATA SheevaPlug Reference Board"
help
Say 'Y' here if you want your kernel to support the
Marvell eSATA SheevaPlug Reference Board.
config MACH_GURUPLUG
bool "Marvell GuruPlug Reference Board"
help
Say 'Y' here if you want your kernel to support the
Marvell GuruPlug Reference Board.
config MACH_INETSPACE_V2
bool "LaCie Internet Space v2 NAS Board"
help
Say 'Y' here if you want your kernel to support the
LaCie Internet Space v2 NAS.
config MACH_MV88F6281GTW_GE
bool "Marvell 88F6281 GTW GE Board"
help
Say 'Y' here if you want your kernel to support the
Marvell 88F6281 GTW GE Board.
config MACH_NET2BIG_V2
bool "LaCie 2Big Network v2 NAS Board"
select KIRKWOOD_LEGACY
help
Say 'Y' here if you want your kernel to support the
LaCie 2Big Network v2 NAS.
config MACH_NET5BIG_V2
bool "LaCie 5Big Network v2 NAS Board"
select KIRKWOOD_LEGACY
help
Say 'Y' here if you want your kernel to support the
LaCie 5Big Network v2 NAS.
config MACH_NETSPACE_MAX_V2
bool "LaCie Network Space Max v2 NAS Board"
help
Say 'Y' here if you want your kernel to support the
LaCie Network Space Max v2 NAS.
config MACH_NETSPACE_V2
bool "LaCie Network Space v2 NAS Board"
help
Say 'Y' here if you want your kernel to support the
LaCie Network Space v2 NAS.
config MACH_OPENRD
select KIRKWOOD_LEGACY
bool
config MACH_OPENRD_BASE
......@@ -88,30 +53,28 @@ config MACH_OPENRD_ULTIMATE
config MACH_RD88F6192_NAS
bool "Marvell RD-88F6192-NAS Reference Board"
select KIRKWOOD_LEGACY
help
Say 'Y' here if you want your kernel to support the
Marvell RD-88F6192-NAS Reference Board.
config MACH_RD88F6281
bool "Marvell RD-88F6281 Reference Board"
select KIRKWOOD_LEGACY
help
Say 'Y' here if you want your kernel to support the
Marvell RD-88F6281 Reference Board.
config MACH_SHEEVAPLUG
bool "Marvell SheevaPlug Reference Board"
help
Say 'Y' here if you want your kernel to support the
Marvell SheevaPlug Reference Board.
config MACH_T5325
bool "HP t5325 Thin Client"
select KIRKWOOD_LEGACY
help
Say 'Y' here if you want your kernel to support the
HP t5325 Thin Client.
config MACH_TS219
bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS"
select KIRKWOOD_LEGACY
help
Say 'Y' here if you want your kernel to support the
QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and
......@@ -119,6 +82,7 @@ config MACH_TS219
config MACH_TS41X
bool "QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo NAS"
select KIRKWOOD_LEGACY
help
Say 'Y' here if you want your kernel to support the
QNAP TS-410, TS-410U, TS-419P, TS-419P+ and TS-419U Turbo
......@@ -129,6 +93,9 @@ comment "Device tree entries"
config ARCH_KIRKWOOD_DT
bool "Marvell Kirkwood Flattened Device Tree"
select KIRKWOOD_CLK
select OF_IRQ
select ORION_IRQCHIP
select ORION_TIMER
select POWER_SUPPLY
select POWER_RESET
select POWER_RESET_GPIO
......@@ -139,184 +106,12 @@ config ARCH_KIRKWOOD_DT
Say 'Y' here if you want your kernel to support the
Marvell Kirkwood using flattened device tree.
config MACH_CLOUDBOX_DT
bool "LaCie CloudBox NAS (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
help
Say 'Y' here if you want your kernel to support the LaCie
CloudBox NAS, using Flattened Device Tree.
config MACH_DB88F628X_BP_DT
bool "Marvell DB-88F628x-BP Development Board (Flattened Device Tree)"
help
Say 'Y' here if you want your kernel to support the Marvell
DB-88F6281-BP and DB-88F6282-BP Development Board (Flattened
Device Tree).
config MACH_DLINK_KIRKWOOD_DT
bool "D-Link Kirkwood-based NAS (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
help
Say 'Y' here if you want your kernel to support the
Kirkwood-based D-Link NASes such as DNS-320 & DNS-325,
using Flattened Device Tree.
config MACH_DOCKSTAR_DT
bool "Seagate FreeAgent Dockstar (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
help
Say 'Y' here if you want your kernel to support the
Seagate FreeAgent Dockstar (Flattened Device Tree).
config MACH_DREAMPLUG_DT
bool "Marvell DreamPlug (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
help
Say 'Y' here if you want your kernel to support the
Marvell DreamPlug (Flattened Device Tree).
config MACH_GOFLEXNET_DT
bool "Seagate GoFlex Net (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
help
Say 'Y' here if you want your kernel to support the
Seagate GoFlex Net (Flattened Device Tree).
config MACH_GURUPLUG_DT
bool "Marvell GuruPlug Reference Board (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
config MACH_MV88F6281GTW_GE_DT
bool "Marvell 88F6281 GTW GE Board (Flattened Device Tree)"
depends on ARCH_KIRKWOOD_DT
help
Say 'Y' here if you want your kernel to support the
Marvell GuruPlug Reference Board (Flattened Device Tree).
config MACH_IB62X0_DT
bool "RaidSonic IB-NAS6210, IB-NAS6220 (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
help
Say 'Y' here if you want your kernel to support the
RaidSonic IB-NAS6210 & IB-NAS6220 devices, using
Flattened Device Tree.
config MACH_ICONNECT_DT
bool "Iomega Iconnect (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
help
Say 'Y' here to enable Iomega Iconnect support.
config MACH_INETSPACE_V2_DT
bool "LaCie Internet Space v2 NAS (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
help
Say 'Y' here if you want your kernel to support the LaCie
Internet Space v2 NAS, using Flattened Device Tree.
config MACH_IOMEGA_IX2_200_DT
bool "Iomega StorCenter ix2-200 (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
help
Say 'Y' here if you want your kernel to support the
Iomega StorCenter ix2-200 (Flattened Device Tree).
config MACH_KM_KIRKWOOD_DT
bool "Keymile Kirkwood Reference Design (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
help
Say 'Y' here if you want your kernel to support the
Keymile Kirkwood Reference Desgin, using Flattened Device Tree.
config MACH_LSXL_DT
bool "Buffalo Linkstation LS-XHL, LS-CHLv2 (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
select POWER_RESET_RESTART
help
Say 'Y' here if you want your kernel to support the
Buffalo Linkstation LS-XHL & LS-CHLv2 devices, using
Flattened Device Tree.
config MACH_MPLCEC4_DT
bool "MPL CEC4 (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
help
Say 'Y' here if you want your kernel to support the
MPL CEC4 (Flattened Device Tree).
config MACH_NETSPACE_LITE_V2_DT
bool "LaCie Network Space Lite v2 NAS (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
help
Say 'Y' here if you want your kernel to support the LaCie
Network Space Lite v2 NAS, using Flattened Device Tree.
config MACH_NETSPACE_MAX_V2_DT
bool "LaCie Network Space Max v2 NAS (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
help
Say 'Y' here if you want your kernel to support the LaCie
Network Space Max v2 NAS, using Flattened Device Tree.
config MACH_NETSPACE_MINI_V2_DT
bool "LaCie Network Space Mini v2 NAS (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
help
Say 'Y' here if you want your kernel to support the LaCie
Network Space Mini v2 NAS using Flattened Device Tree.
This board is embedded in a product named CloudBox, which
provides automatic backup on a 100GB cloud storage. This
should not confused with a more recent LaCie NAS also named
CloudBox. For this last, the disk capacity is 1TB or above.
config MACH_NETSPACE_V2_DT
bool "LaCie Network Space v2 NAS (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
help
Say 'Y' here if you want your kernel to support the LaCie
Network Space v2 NAS, using Flattened Device Tree.
config MACH_OPENBLOCKS_A6_DT
bool "Plat'Home OpenBlocks A6 (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
help
Say 'Y' here if you want your kernel to support the
Plat'Home OpenBlocks A6 (Flattened Device Tree).
config MACH_READYNAS_DT
bool "NETGEAR ReadyNAS Duo v2 (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
select ARM_APPENDED_DTB
select ARM_ATAG_DTB_COMPAT
help
Say 'Y' here if you want your kernel to support the
NETGEAR ReadyNAS Duo v2 using Fattened Device Tree.
config MACH_SHEEVAPLUG_DT
bool "Marvell (eSATA) SheevaPlug (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
help
Say 'Y' here if you want your kernel to support the
Marvell (eSATA) SheevaPlug (Flattened Device Tree).
config MACH_TOPKICK_DT
bool "USI Topkick (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
help
Say 'Y' here if you want your kernel to support the
USI Topkick, using Flattened Device Tree
config MACH_TS219_DT
bool "Device Tree for QNAP TS-11X, TS-21X NAS"
select ARCH_KIRKWOOD_DT
select ARM_APPENDED_DTB
select ARM_ATAG_DTB_COMPAT
select POWER_RESET_QNAP
help
Say 'Y' here if you want your kernel to support the QNAP
TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and
TS-219P+ Turbo NAS devices using Fattened Device Tree.
There are two different Device Tree descriptions, depending
on if the device is based on an if the board uses the MV6281
or MV6282. If you have the wrong one, the buttons will not
work.
Marvell 88F6281 GTW GE Board (Flattened Device Tree).
endmenu
......
arch/arm/mach-kirkwood/Makefile
View file @ 44598f98
obj-y += common.o irq.o pcie.o mpp.o
obj-y += common.o pcie.o
obj-$(CONFIG_KIRKWOOD_LEGACY) += irq.o mpp.o
obj-$(CONFIG_MACH_D2NET_V2) += d2net_v2-setup.o lacie_v2-common.o
obj-$(CONFIG_MACH_DOCKSTAR) += dockstar-setup.o
obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG) += sheevaplug-setup.o
obj-$(CONFIG_MACH_GURUPLUG) += guruplug-setup.o
obj-$(CONFIG_MACH_INETSPACE_V2) += netspace_v2-setup.o lacie_v2-common.o
obj-$(CONFIG_MACH_MV88F6281GTW_GE) += mv88f6281gtw_ge-setup.o
obj-$(CONFIG_MACH_NET2BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o
obj-$(CONFIG_MACH_NET5BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o
obj-$(CONFIG_MACH_NETSPACE_MAX_V2) += netspace_v2-setup.o lacie_v2-common.o
obj-$(CONFIG_MACH_NETSPACE_V2) += netspace_v2-setup.o lacie_v2-common.o
obj-$(CONFIG_MACH_OPENRD) += openrd-setup.o
obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88f6192-nas-setup.o
obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o
obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o
obj-$(CONFIG_MACH_T5325) += t5325-setup.o
obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o
obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o
obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o
obj-$(CONFIG_MACH_CLOUDBOX_DT) += board-ns2.o
obj-$(CONFIG_MACH_DB88F628X_BP_DT) += board-db88f628x-bp.o
obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += board-dnskw.o
obj-$(CONFIG_MACH_DOCKSTAR_DT) += board-dockstar.o
obj-$(CONFIG_MACH_DREAMPLUG_DT) += board-dreamplug.o
obj-$(CONFIG_MACH_GOFLEXNET_DT) += board-goflexnet.o
obj-$(CONFIG_MACH_GURUPLUG_DT) += board-guruplug.o
obj-$(CONFIG_MACH_IB62X0_DT) += board-ib62x0.o
obj-$(CONFIG_MACH_ICONNECT_DT) += board-iconnect.o
obj-$(CONFIG_MACH_INETSPACE_V2_DT) += board-ns2.o
obj-$(CONFIG_MACH_IOMEGA_IX2_200_DT) += board-iomega_ix2_200.o
obj-$(CONFIG_MACH_KM_KIRKWOOD_DT) += board-km_kirkwood.o
obj-$(CONFIG_MACH_LSXL_DT) += board-lsxl.o
obj-$(CONFIG_MACH_MPLCEC4_DT) += board-mplcec4.o
obj-$(CONFIG_MACH_NETSPACE_LITE_V2_DT) += board-ns2.o
obj-$(CONFIG_MACH_NETSPACE_MAX_V2_DT) += board-ns2.o
obj-$(CONFIG_MACH_NETSPACE_MINI_V2_DT) += board-ns2.o
obj-$(CONFIG_MACH_NETSPACE_V2_DT) += board-ns2.o
obj-$(CONFIG_MACH_OPENBLOCKS_A6_DT) += board-openblocks_a6.o
obj-$(CONFIG_MACH_READYNAS_DT) += board-readynas.o
obj-$(CONFIG_MACH_SHEEVAPLUG_DT) += board-sheevaplug.o
obj-$(CONFIG_MACH_TOPKICK_DT) += board-usi_topkick.o
obj-$(CONFIG_MACH_TS219_DT) += board-ts219.o tsx1x-common.o
obj-$(CONFIG_MACH_MV88F6281GTW_GE_DT) += board-mv88f6281gtw_ge.o
arch/arm/mach-kirkwood/board-db88f628x-bp.c deleted 100644 → 0
View file @ b4b50fd7
/*
* Saeed Bishara <saeed@marvell.com>
*
* Marvell DB-88F628{1,2}-BP Development Board Setup
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/of.h>
#include <linux/mv643xx_eth.h>
#include "common.h"
static struct mv643xx_eth_platform_data db88f628x_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
};
void __init db88f628x_init(void)
{
kirkwood_ge00_init(&db88f628x_ge00_data);
}
arch/arm/mach-kirkwood/board-dnskw.c deleted 100644 → 0
View file @ b4b50fd7
/*
* Copyright 2012 (C), Jamie Lentin <jm@lentin.co.uk>
*
* arch/arm/mach-kirkwood/board-dnskw.c
*
* D-link DNS-320 & DNS-325 NAS Init for drivers not converted to
* flattened device tree yet.
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mv643xx_eth.h>
#include <linux/gpio.h>
#include "common.h"
static struct mv643xx_eth_platform_data dnskw_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
};
/* Register any GPIO for output and set the value */
static void __init dnskw_gpio_register(unsigned gpio, char *name, int def)
{
if (gpio_request(gpio, name) == 0 &&
gpio_direction_output(gpio, 0) == 0) {
gpio_set_value(gpio, def);
if (gpio_export(gpio, 0) != 0)
pr_err("dnskw: Failed to export GPIO %s\n", name);
} else
pr_err("dnskw: Failed to register %s\n", name);
}
void __init dnskw_init(void)
{
kirkwood_ge00_init(&dnskw_ge00_data);
/* Set NAS to turn back on after a power failure */
dnskw_gpio_register(37, "dnskw:power:recover", 1);
}
arch/arm/mach-kirkwood/board-dockstar.c deleted 100644 → 0
View file @ b4b50fd7
/*
* arch/arm/mach-kirkwood/board-dockstar.c
*
* Seagate FreeAgent Dockstar Board Init for drivers not converted to
* flattened device tree yet.
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*
* Copied and modified for Seagate GoFlex Net support by
* Joshua Coombs <josh.coombs@gmail.com> based on ArchLinux ARM's
* GoFlex kernel patches.
*
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mv643xx_eth.h>
#include "common.h"
static struct mv643xx_eth_platform_data dockstar_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(0),
};
void __init dockstar_dt_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
kirkwood_ge00_init(&dockstar_ge00_data);
}
arch/arm/mach-kirkwood/board-dreamplug.c deleted 100644 → 0
View file @ b4b50fd7
/*
* Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
*
* arch/arm/mach-kirkwood/board-dreamplug.c
*
* Marvell DreamPlug Reference Board Init for drivers not converted to
* flattened device tree yet.
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mv643xx_eth.h>
#include <linux/gpio.h>
#include "common.h"
static struct mv643xx_eth_platform_data dreamplug_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(0),
};
static struct mv643xx_eth_platform_data dreamplug_ge01_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(1),
};
void __init dreamplug_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
kirkwood_ge00_init(&dreamplug_ge00_data);
kirkwood_ge01_init(&dreamplug_ge01_data);
}
arch/arm/mach-kirkwood/board-dt.c
View file @ 44598f98
......@@ -15,6 +15,9 @@
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/clk-provider.h>
#include <linux/clocksource.h>
#include <linux/dma-mapping.h>
#include <linux/irqchip.h>
#include <linux/kexec.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
......@@ -49,10 +52,6 @@ static void __init kirkwood_legacy_clk_init(void)
orion_clkdev_add("1", "pcie",
of_clk_get_from_provider(&clkspec));
clkspec.args[0] = CGC_BIT_SDIO;
orion_clkdev_add(NULL, "mvsdio",
of_clk_get_from_provider(&clkspec));
/*
* The ethernet interfaces forget the MAC address assigned by
* u-boot if the clocks are turned off. Until proper DT support
......@@ -60,19 +59,24 @@ static void __init kirkwood_legacy_clk_init(void)
*/
clkspec.args[0] = CGC_BIT_GE0;
clk = of_clk_get_from_provider(&clkspec);
orion_clkdev_add(NULL, "mv643xx_eth_port.0", clk);
clk_prepare_enable(clk);
clkspec.args[0] = CGC_BIT_GE1;
clk = of_clk_get_from_provider(&clkspec);
orion_clkdev_add(NULL, "mv643xx_eth_port.1", clk);
clk_prepare_enable(clk);
}
static void __init kirkwood_of_clk_init(void)
static void __init kirkwood_dt_time_init(void)
{
of_clk_init(NULL);
kirkwood_legacy_clk_init();
clocksource_of_init();
}
static void __init kirkwood_dt_init_early(void)
{
mvebu_mbus_init("marvell,kirkwood-mbus",
BRIDGE_WINS_BASE, BRIDGE_WINS_SZ,
DDR_WINDOW_CPU_BASE, DDR_WINDOW_CPU_SZ);
}
static void __init kirkwood_dt_init(void)
......@@ -94,8 +98,8 @@ static void __init kirkwood_dt_init(void)
kirkwood_cpufreq_init();
/* Setup root of clk tree */
kirkwood_of_clk_init();
/* Setup clocks for legacy devices */
kirkwood_legacy_clk_init();
kirkwood_cpuidle_init();
......@@ -103,105 +107,22 @@ static void __init kirkwood_dt_init(void)
kexec_reinit = kirkwood_enable_pcie;
#endif
if (of_machine_is_compatible("globalscale,dreamplug"))
dreamplug_init();
if (of_machine_is_compatible("globalscale,guruplug"))
guruplug_dt_init();
if (of_machine_is_compatible("globalscale,sheevaplug"))
sheevaplug_dt_init();
if (of_machine_is_compatible("dlink,dns-kirkwood"))
dnskw_init();
if (of_machine_is_compatible("iom,iconnect"))
iconnect_init();
if (of_machine_is_compatible("raidsonic,ib-nas62x0"))
ib62x0_init();
if (of_machine_is_compatible("qnap,ts219"))
qnap_dt_ts219_init();
if (of_machine_is_compatible("seagate,dockstar"))
dockstar_dt_init();
if (of_machine_is_compatible("seagate,goflexnet"))
goflexnet_init();
if (of_machine_is_compatible("buffalo,lsxl"))
lsxl_init();
if (of_machine_is_compatible("iom,ix2-200"))
iomega_ix2_200_init();
if (of_machine_is_compatible("keymile,km_kirkwood"))
km_kirkwood_init();
if (of_machine_is_compatible("lacie,cloudbox") ||
of_machine_is_compatible("lacie,inetspace_v2") ||
of_machine_is_compatible("lacie,netspace_lite_v2") ||
of_machine_is_compatible("lacie,netspace_max_v2") ||
of_machine_is_compatible("lacie,netspace_mini_v2") ||
of_machine_is_compatible("lacie,netspace_v2"))
ns2_init();
if (of_machine_is_compatible("marvell,db-88f6281-bp") ||
of_machine_is_compatible("marvell,db-88f6282-bp"))
db88f628x_init();
if (of_machine_is_compatible("mpl,cec4"))
mplcec4_init();
if (of_machine_is_compatible("netgear,readynas-duo-v2"))
netgear_readynas_init();
if (of_machine_is_compatible("plathome,openblocks-a6"))
openblocks_a6_init();
if (of_machine_is_compatible("usi,topkick"))
usi_topkick_init();
if (of_machine_is_compatible("marvell,mv88f6281gtw-ge"))
mv88f6281gtw_ge_init();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static const char * const kirkwood_dt_board_compat[] = {
"globalscale,dreamplug",
"globalscale,guruplug",
"globalscale,sheevaplug",
"dlink,dns-320",
"dlink,dns-325",
"iom,iconnect",
"raidsonic,ib-nas62x0",
"qnap,ts219",
"seagate,dockstar",
"seagate,goflexnet",
"buffalo,lsxl",
"iom,ix2-200",
"keymile,km_kirkwood",
"lacie,cloudbox",
"lacie,inetspace_v2",
"lacie,netspace_lite_v2",
"lacie,netspace_max_v2",
"lacie,netspace_mini_v2",
"lacie,netspace_v2",
"marvell,db-88f6281-bp",
"marvell,db-88f6282-bp",
"mpl,cec4",
"netgear,readynas-duo-v2",
"plathome,openblocks-a6",
"usi,topkick",
"zyxel,nsa310",
"marvell,kirkwood",
NULL
};
DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)")
/* Maintainer: Jason Cooper <jason@lakedaemon.net> */
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = orion_dt_init_irq,
.init_time = kirkwood_timer_init,
.init_early = kirkwood_dt_init_early,
.init_time = kirkwood_dt_time_init,
.init_machine = kirkwood_dt_init,
.restart = kirkwood_restart,
.dt_compat = kirkwood_dt_board_compat,
......
arch/arm/mach-kirkwood/board-goflexnet.c deleted 100644 → 0
View file @ b4b50fd7
/*
* Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
*
* arch/arm/mach-kirkwood/board-goflexnet.c
*
* Seagate GoFlext Net Board Init for drivers not converted to
* flattened device tree yet.
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*
* Copied and modified for Seagate GoFlex Net support by
* Joshua Coombs <josh.coombs@gmail.com> based on ArchLinux ARM's
* GoFlex kernel patches.
*
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mv643xx_eth.h>
#include "common.h"
static struct mv643xx_eth_platform_data goflexnet_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(0),
};
void __init goflexnet_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
kirkwood_ge00_init(&goflexnet_ge00_data);
}
arch/arm/mach-kirkwood/board-guruplug.c deleted 100644 → 0
View file @ b4b50fd7
/*
* arch/arm/mach-kirkwood/board-guruplug.c
*
* Marvell Guruplug Reference Board Init for drivers not converted to
* flattened device tree yet.
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mv643xx_eth.h>
#include <linux/gpio.h>
#include "common.h"
static struct mv643xx_eth_platform_data guruplug_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(0),
};
static struct mv643xx_eth_platform_data guruplug_ge01_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(1),
};
void __init guruplug_dt_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
kirkwood_ge00_init(&guruplug_ge00_data);
kirkwood_ge01_init(&guruplug_ge01_data);
}
arch/arm/mach-kirkwood/board-ib62x0.c deleted 100644 → 0
View file @ b4b50fd7
/*
* Copyright 2012 (C), Simon Baatz <gmbnomis@gmail.com>
*
* arch/arm/mach-kirkwood/board-ib62x0.c
*
* RaidSonic ICY BOX IB-NAS6210 & IB-NAS6220 init for drivers not
* converted to flattened device tree yet.
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mv643xx_eth.h>
#include "common.h"
static struct mv643xx_eth_platform_data ib62x0_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
};
void __init ib62x0_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
kirkwood_ge00_init(&ib62x0_ge00_data);
}
arch/arm/mach-kirkwood/board-iconnect.c deleted 100644 → 0
View file @ b4b50fd7
/*
* arch/arm/mach-kirkwood/board-iconnect.c
*
* Iomega i-connect Board Setup
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/of.h>
#include <linux/mv643xx_eth.h>
#include "common.h"
static struct mv643xx_eth_platform_data iconnect_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(11),
};
void __init iconnect_init(void)
{
kirkwood_ge00_init(&iconnect_ge00_data);
}
arch/arm/mach-kirkwood/board-iomega_ix2_200.c deleted 100644 → 0
View file @ b4b50fd7
/*
* arch/arm/mach-kirkwood/board-iomega_ix2_200.c
*
* Iomega StorCenter ix2-200
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mv643xx_eth.h>
#include <linux/ethtool.h>
#include "common.h"
static struct mv643xx_eth_platform_data iomega_ix2_200_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_NONE,
.speed = SPEED_1000,
.duplex = DUPLEX_FULL,
};
static struct mv643xx_eth_platform_data iomega_ix2_200_ge01_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(11),
};
void __init iomega_ix2_200_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
kirkwood_ge00_init(&iomega_ix2_200_ge00_data);
kirkwood_ge01_init(&iomega_ix2_200_ge01_data);
}
arch/arm/mach-kirkwood/board-km_kirkwood.c deleted 100644 → 0
View file @ b4b50fd7
/*
* Copyright 2012 2012 KEYMILE AG, CH-3097 Bern
* Valentin Longchamp <valentin.longchamp@keymile.com>
*
* arch/arm/mach-kirkwood/board-km_kirkwood.c
*
* Keymile km_kirkwood Reference Desing Init for drivers not converted to
* flattened device tree yet.
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mv643xx_eth.h>
#include <linux/clk.h>
#include <linux/clk-private.h>
#include "common.h"
static struct mv643xx_eth_platform_data km_kirkwood_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(0),
};
void __init km_kirkwood_init(void)
{
struct clk *sata_clk;
/*
* Our variant of kirkwood (integrated in the Bobcat) hangs on accessing
* SATA bits (14-15) of the Clock Gating Control Register. Since these
* devices are also not present in this variant, their clocks get
* disabled because unused when clk_disable_unused() gets called.
* That's why we change the flags to these clocks to CLK_IGNORE_UNUSED
*/
sata_clk = clk_get_sys("sata_mv.0", "0");
if (!IS_ERR(sata_clk))
sata_clk->flags |= CLK_IGNORE_UNUSED;
sata_clk = clk_get_sys("sata_mv.0", "1");
if (!IS_ERR(sata_clk))
sata_clk->flags |= CLK_IGNORE_UNUSED;
kirkwood_ge00_init(&km_kirkwood_ge00_data);
}
arch/arm/mach-kirkwood/board-lsxl.c deleted 100644 → 0
View file @ b4b50fd7
/*
* Copyright 2012 (C), Michael Walle <michael@walle.cc>
*
* arch/arm/mach-kirkwood/board-lsxl.c
*
* Buffalo Linkstation LS-XHL and LS-CHLv2 init for drivers not
* converted to flattened device tree yet.
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mv643xx_eth.h>
#include "common.h"
static struct mv643xx_eth_platform_data lsxl_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(0),
};
static struct mv643xx_eth_platform_data lsxl_ge01_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
};
void __init lsxl_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
kirkwood_ge00_init(&lsxl_ge00_data);
kirkwood_ge01_init(&lsxl_ge01_data);
}
arch/arm/mach-kirkwood/board-mplcec4.c deleted 100644 → 0
View file @ b4b50fd7
/*
* Copyright (C) 2012 MPL AG, Switzerland
* Stefan Peter <s.peter@mpl.ch>
*
* arch/arm/mach-kirkwood/board-mplcec4.c
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mv643xx_eth.h>
#include "common.h"
static struct mv643xx_eth_platform_data mplcec4_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(1),
};
static struct mv643xx_eth_platform_data mplcec4_ge01_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(2),
};
void __init mplcec4_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
kirkwood_ge00_init(&mplcec4_ge00_data);
kirkwood_ge01_init(&mplcec4_ge01_data);
}
arch/arm/mach-kirkwood/board-mv88f6281gtw_ge.c 0 → 100644
View file @ 44598f98
/*
* arch/arm/mach-kirkwood/board-mv88f6281gtw_ge.c
*
* Marvell 88F6281 GTW GE Board Setup
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/irq.h>
#include <linux/timer.h>
#include <linux/mv643xx_eth.h>
#include <linux/ethtool.h>
#include <linux/gpio.h>
#include <net/dsa.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/kirkwood.h>
#include "common.h"
static struct mv643xx_eth_platform_data mv88f6281gtw_ge_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_NONE,
.speed = SPEED_1000,
.duplex = DUPLEX_FULL,
};
static struct dsa_chip_data mv88f6281gtw_ge_switch_chip_data = {
.port_names[0] = "lan1",
.port_names[1] = "lan2",
.port_names[2] = "lan3",
.port_names[3] = "lan4",
.port_names[4] = "wan",
.port_names[5] = "cpu",
};
static struct dsa_platform_data mv88f6281gtw_ge_switch_plat_data = {
.nr_chips = 1,
.chip = &mv88f6281gtw_ge_switch_chip_data,
};
void __init mv88f6281gtw_ge_init(void)
{
kirkwood_ge00_init(&mv88f6281gtw_ge_ge00_data);
kirkwood_ge00_switch_init(&mv88f6281gtw_ge_switch_plat_data, NO_IRQ);
}
arch/arm/mach-kirkwood/board-ns2.c deleted 100644 → 0
View file @ b4b50fd7
/*
* Copyright 2012 (C), Simon Guinot <simon.guinot@sequanux.org>
*
* arch/arm/mach-kirkwood/board-ns2.c
*
* LaCie Network Space v2 board (and parents) initialization for drivers
* not converted to flattened device tree yet.
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mv643xx_eth.h>
#include <linux/of.h>
#include "common.h"
static struct mv643xx_eth_platform_data ns2_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
};
void __init ns2_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
if (of_machine_is_compatible("lacie,cloudbox") ||
of_machine_is_compatible("lacie,netspace_lite_v2") ||
of_machine_is_compatible("lacie,netspace_mini_v2"))
ns2_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
kirkwood_ge00_init(&ns2_ge00_data);
}
arch/arm/mach-kirkwood/board-openblocks_a6.c deleted 100644 → 0
View file @ b4b50fd7
/*
* Copyright 2012 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
*
* arch/arm/mach-kirkwood/board-openblocks_a6.c
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mv643xx_eth.h>
#include "common.h"
static struct mv643xx_eth_platform_data openblocks_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(0),
};
void __init openblocks_a6_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
kirkwood_ge00_init(&openblocks_ge00_data);
}
arch/arm/mach-kirkwood/board-readynas.c deleted 100644 → 0
View file @ b4b50fd7
/*
* NETGEAR ReadyNAS Duo v2 Board setup for drivers not already
* converted to DT.
*
* Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mv643xx_eth.h>
#include <mach/kirkwood.h>
#include "common.h"
static struct mv643xx_eth_platform_data netgear_readynas_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(0),
};
void __init netgear_readynas_init(void)
{
kirkwood_ge00_init(&netgear_readynas_ge00_data);
}
arch/arm/mach-kirkwood/board-sheevaplug.c deleted 100644 → 0
View file @ b4b50fd7
/*
* arch/arm/mach-kirkwood/board-sheevaplug.c
*
* Marvell Sheevaplug Reference Board Init for drivers not converted to
* flattened device tree yet.
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mv643xx_eth.h>
#include "common.h"
static struct mv643xx_eth_platform_data sheevaplug_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(0),
};
void __init sheevaplug_dt_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
kirkwood_ge00_init(&sheevaplug_ge00_data);
}
arch/arm/mach-kirkwood/board-ts219.c deleted 100644 → 0
View file @ b4b50fd7
/*
*
* QNAP TS-11x/TS-21x Turbo NAS Board Setup via DT
*
* Copyright (C) 2012 Andrew Lunn <andrew@lunn.ch>
*
* Based on the board file ts219-setup.c:
*
* Copyright (C) 2009 Martin Michlmayr <tbm@cyrius.com>
* Copyright (C) 2008 Byron Bradley <byron.bbradley@gmail.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mv643xx_eth.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
#include "common.h"
static struct mv643xx_eth_platform_data qnap_ts219_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
};
void __init qnap_dt_ts219_init(void)
{
u32 dev, rev;
kirkwood_pcie_id(&dev, &rev);
if (dev == MV88F6282_DEV_ID)
qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
kirkwood_ge00_init(&qnap_ts219_ge00_data);
}
arch/arm/mach-kirkwood/board-usi_topkick.c deleted 100644 → 0
View file @ b4b50fd7
/*
* Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
*
* arch/arm/mach-kirkwood/board-usi_topkick.c
*
* USI Topkick Init for drivers not converted to flattened device tree yet.
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mv643xx_eth.h>
#include <linux/gpio.h>
#include "common.h"
static struct mv643xx_eth_platform_data topkick_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(0),
};
void __init usi_topkick_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
kirkwood_ge00_init(&topkick_ge00_data);
}
arch/arm/mach-kirkwood/common.h
View file @ 44598f98
......@@ -59,119 +59,10 @@ void kirkwood_restart(enum reboot_mode, const char *);
void kirkwood_clk_init(void);
/* board init functions for boards not fully converted to fdt */
#ifdef CONFIG_MACH_DREAMPLUG_DT
void dreamplug_init(void);
#ifdef CONFIG_MACH_MV88F6281GTW_GE_DT
void mv88f6281gtw_ge_init(void);
#else
static inline void dreamplug_init(void) {};
#endif
#ifdef CONFIG_MACH_GURUPLUG_DT
void guruplug_dt_init(void);
#else
static inline void guruplug_dt_init(void) {};
#endif
#ifdef CONFIG_MACH_SHEEVAPLUG_DT
void sheevaplug_dt_init(void);
#else
static inline void sheevaplug_dt_init(void) {};
#endif
#ifdef CONFIG_MACH_TS219_DT
void qnap_dt_ts219_init(void);
#else
static inline void qnap_dt_ts219_init(void) {};
#endif
#ifdef CONFIG_MACH_DLINK_KIRKWOOD_DT
void dnskw_init(void);
#else
static inline void dnskw_init(void) {};
#endif
#ifdef CONFIG_MACH_ICONNECT_DT
void iconnect_init(void);
#else
static inline void iconnect_init(void) {};
#endif
#ifdef CONFIG_MACH_IB62X0_DT
void ib62x0_init(void);
#else
static inline void ib62x0_init(void) {};
#endif
#ifdef CONFIG_MACH_DOCKSTAR_DT
void dockstar_dt_init(void);
#else
static inline void dockstar_dt_init(void) {};
#endif
#ifdef CONFIG_MACH_GOFLEXNET_DT
void goflexnet_init(void);
#else
static inline void goflexnet_init(void) {};
#endif
#ifdef CONFIG_MACH_LSXL_DT
void lsxl_init(void);
#else
static inline void lsxl_init(void) {};
#endif
#ifdef CONFIG_MACH_IOMEGA_IX2_200_DT
void iomega_ix2_200_init(void);
#else
static inline void iomega_ix2_200_init(void) {};
#endif
#ifdef CONFIG_MACH_KM_KIRKWOOD_DT
void km_kirkwood_init(void);
#else
static inline void km_kirkwood_init(void) {};
#endif
#ifdef CONFIG_MACH_DB88F628X_BP_DT
void db88f628x_init(void);
#else
static inline void db88f628x_init(void) {};
#endif
#ifdef CONFIG_MACH_MPLCEC4_DT
void mplcec4_init(void);
#else
static inline void mplcec4_init(void) {};
#endif
#if defined(CONFIG_MACH_INETSPACE_V2_DT) || \
defined(CONFIG_MACH_NETSPACE_V2_DT) || \
defined(CONFIG_MACH_NETSPACE_MAX_V2_DT) || \
defined(CONFIG_MACH_NETSPACE_LITE_V2_DT) || \
defined(CONFIG_MACH_NETSPACE_MINI_V2_DT)
void ns2_init(void);
#else
static inline void ns2_init(void) {};
#endif
#ifdef CONFIG_MACH_OPENBLOCKS_A6_DT
void openblocks_a6_init(void);
#else
static inline void openblocks_a6_init(void) {};
#endif
#ifdef CONFIG_MACH_READYNAS_DT
void netgear_readynas_init(void);
#else
static inline void netgear_readynas_init(void) {};
#endif
#ifdef CONFIG_MACH_TOPKICK_DT
void usi_topkick_init(void);
#else
static inline void usi_topkick_init(void) {};
#endif
#ifdef CONFIG_MACH_CLOUDBOX_DT
void cloudbox_init(void);
#else
static inline void cloudbox_init(void) {};
static inline void mv88f6281gtw_ge_init(void) {};
#endif
/* early init functions not converted to fdt yet */
......
arch/arm/mach-kirkwood/dockstar-setup.c deleted 100644 → 0
View file @ b4b50fd7
/*
* arch/arm/mach-kirkwood/dockstar-setup.c
*
* Seagate FreeAgent DockStar Setup
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
#include <linux/mtd/partitions.h>
#include <linux/mv643xx_eth.h>
#include <linux/gpio.h>
#include <linux/leds.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
#include "common.h"
#include "mpp.h"
static struct mtd_partition dockstar_nand_parts[] = {
{
.name = "u-boot",
.offset = 0,
.size = SZ_1M
}, {
.name = "uImage",
.offset = MTDPART_OFS_NXTBLK,
.size = SZ_4M
}, {
.name = "root",
.offset = MTDPART_OFS_NXTBLK,
.size = MTDPART_SIZ_FULL
},
};
static struct mv643xx_eth_platform_data dockstar_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(0),
};
static struct gpio_led dockstar_led_pins[] = {
{
.name = "dockstar:green:health",
.default_trigger = "default-on",
.gpio = 46,
.active_low = 1,
},
{
.name = "dockstar:orange:misc",
.default_trigger = "none",
.gpio = 47,
.active_low = 1,
},
};
static struct gpio_led_platform_data dockstar_led_data = {
.leds = dockstar_led_pins,
.num_leds = ARRAY_SIZE(dockstar_led_pins),
};
static struct platform_device dockstar_leds = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &dockstar_led_data,
}
};
static unsigned int dockstar_mpp_config[] __initdata = {
MPP29_GPIO, /* USB Power Enable */
MPP46_GPIO, /* LED green */
MPP47_GPIO, /* LED orange */
0
};
static void __init dockstar_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
kirkwood_init();
/* setup gpio pin select */
kirkwood_mpp_conf(dockstar_mpp_config);
kirkwood_uart0_init();
kirkwood_nand_init(ARRAY_AND_SIZE(dockstar_nand_parts), 25);
if (gpio_request(29, "USB Power Enable") != 0 ||
gpio_direction_output(29, 1) != 0)
pr_err("can't set up GPIO 29 (USB Power Enable)\n");
kirkwood_ehci_init();
kirkwood_ge00_init(&dockstar_ge00_data);
platform_device_register(&dockstar_leds);
}
MACHINE_START(DOCKSTAR, "Seagate FreeAgent DockStar")
.atag_offset = 0x100,
.init_machine = dockstar_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.init_time = kirkwood_timer_init,
.restart = kirkwood_restart,
MACHINE_END
arch/arm/mach-kirkwood/guruplug-setup.c deleted 100644 → 0
View file @ b4b50fd7
/*
* arch/arm/mach-kirkwood/guruplug-setup.c
*
* Marvell GuruPlug Reference Board Setup
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mtd/partitions.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
#include <linux/gpio.h>
#include <linux/leds.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
#include <linux/platform_data/mmc-mvsdio.h>
#include "common.h"
#include "mpp.h"
static struct mtd_partition guruplug_nand_parts[] = {
{
.name = "u-boot",
.offset = 0,
.size = SZ_1M
}, {
.name = "uImage",
.offset = MTDPART_OFS_NXTBLK,
.size = SZ_4M
}, {
.name = "root",
.offset = MTDPART_OFS_NXTBLK,
.size = MTDPART_SIZ_FULL
},
};
static struct mv643xx_eth_platform_data guruplug_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(0),
};
static struct mv643xx_eth_platform_data guruplug_ge01_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(1),
};
static struct mv_sata_platform_data guruplug_sata_data = {
.n_ports = 1,
};
static struct mvsdio_platform_data guruplug_mvsdio_data = {
/* unfortunately the CD signal has not been connected */
.gpio_card_detect = -1,
.gpio_write_protect = -1,
};
static struct gpio_led guruplug_led_pins[] = {
{
.name = "guruplug:red:health",
.gpio = 46,
.active_low = 1,
},
{
.name = "guruplug:green:health",
.gpio = 47,
.active_low = 1,
},
{
.name = "guruplug:red:wmode",
.gpio = 48,
.active_low = 1,
},
{
.name = "guruplug:green:wmode",
.gpio = 49,
.active_low = 1,
},
};
static struct gpio_led_platform_data guruplug_led_data = {
.leds = guruplug_led_pins,
.num_leds = ARRAY_SIZE(guruplug_led_pins),
};
static struct platform_device guruplug_leds = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &guruplug_led_data,
}
};
static unsigned int guruplug_mpp_config[] __initdata = {
MPP46_GPIO, /* M_RLED */
MPP47_GPIO, /* M_GLED */
MPP48_GPIO, /* B_RLED */
MPP49_GPIO, /* B_GLED */
0
};
static void __init guruplug_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
kirkwood_init();
kirkwood_mpp_conf(guruplug_mpp_config);
kirkwood_uart0_init();
kirkwood_nand_init(ARRAY_AND_SIZE(guruplug_nand_parts), 25);
kirkwood_ehci_init();
kirkwood_ge00_init(&guruplug_ge00_data);
kirkwood_ge01_init(&guruplug_ge01_data);
kirkwood_sata_init(&guruplug_sata_data);
kirkwood_sdio_init(&guruplug_mvsdio_data);
platform_device_register(&guruplug_leds);
}
MACHINE_START(GURUPLUG, "Marvell GuruPlug Reference Board")
/* Maintainer: Siddarth Gore <gores@marvell.com> */
.atag_offset = 0x100,
.init_machine = guruplug_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.init_time = kirkwood_timer_init,
.restart = kirkwood_restart,
MACHINE_END
arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c deleted 100644 → 0
View file @ b4b50fd7
/*
* arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
*
* Marvell 88F6281 GTW GE Board Setup
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/pci.h>
#include <linux/irq.h>
#include <linux/mtd/physmap.h>
#include <linux/timer.h>
#include <linux/mv643xx_eth.h>
#include <linux/ethtool.h>
#include <linux/gpio.h>
#include <linux/leds.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
#include <linux/spi/flash.h>
#include <linux/spi/spi.h>
#include <net/dsa.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/kirkwood.h>
#include "common.h"
#include "mpp.h"
static struct mv643xx_eth_platform_data mv88f6281gtw_ge_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_NONE,
.speed = SPEED_1000,
.duplex = DUPLEX_FULL,
};
static struct dsa_chip_data mv88f6281gtw_ge_switch_chip_data = {
.port_names[0] = "lan1",
.port_names[1] = "lan2",
.port_names[2] = "lan3",
.port_names[3] = "lan4",
.port_names[4] = "wan",
.port_names[5] = "cpu",
};
static struct dsa_platform_data mv88f6281gtw_ge_switch_plat_data = {
.nr_chips = 1,
.chip = &mv88f6281gtw_ge_switch_chip_data,
};
static const struct flash_platform_data mv88f6281gtw_ge_spi_slave_data = {
.type = "mx25l12805d",
};
static struct spi_board_info __initdata mv88f6281gtw_ge_spi_slave_info[] = {
{
.modalias = "m25p80",
.platform_data = &mv88f6281gtw_ge_spi_slave_data,
.irq = -1,
.max_speed_hz = 50000000,
.bus_num = 0,
.chip_select = 0,
},
};
static struct gpio_keys_button mv88f6281gtw_ge_button_pins[] = {
{
.code = KEY_RESTART,
.gpio = 47,
.desc = "SWR Button",
.active_low = 1,
}, {
.code = KEY_WPS_BUTTON,
.gpio = 46,
.desc = "WPS Button",
.active_low = 1,
},
};
static struct gpio_keys_platform_data mv88f6281gtw_ge_button_data = {
.buttons = mv88f6281gtw_ge_button_pins,
.nbuttons = ARRAY_SIZE(mv88f6281gtw_ge_button_pins),
};
static struct platform_device mv88f6281gtw_ge_buttons = {
.name = "gpio-keys",
.id = -1,
.num_resources = 0,
.dev = {
.platform_data = &mv88f6281gtw_ge_button_data,
},
};
static struct gpio_led mv88f6281gtw_ge_led_pins[] = {
{
.name = "gtw:green:Status",
.gpio = 20,
.active_low = 0,
}, {
.name = "gtw:red:Status",
.gpio = 21,
.active_low = 0,
}, {
.name = "gtw:green:USB",
.gpio = 12,
.active_low = 0,
},
};
static struct gpio_led_platform_data mv88f6281gtw_ge_led_data = {
.leds = mv88f6281gtw_ge_led_pins,
.num_leds = ARRAY_SIZE(mv88f6281gtw_ge_led_pins),
};
static struct platform_device mv88f6281gtw_ge_leds = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &mv88f6281gtw_ge_led_data,
},
};
static unsigned int mv88f6281gtw_ge_mpp_config[] __initdata = {
MPP12_GPO, /* Status#_USB pin */
MPP20_GPIO, /* Status#_GLED pin */
MPP21_GPIO, /* Status#_RLED pin */
MPP46_GPIO, /* WPS_Switch pin */
MPP47_GPIO, /* SW_Init pin */
0
};
static void __init mv88f6281gtw_ge_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
kirkwood_init();
kirkwood_mpp_conf(mv88f6281gtw_ge_mpp_config);
kirkwood_ehci_init();
kirkwood_ge00_init(&mv88f6281gtw_ge_ge00_data);
kirkwood_ge00_switch_init(&mv88f6281gtw_ge_switch_plat_data, NO_IRQ);
spi_register_board_info(mv88f6281gtw_ge_spi_slave_info,
ARRAY_SIZE(mv88f6281gtw_ge_spi_slave_info));
kirkwood_spi_init();
kirkwood_uart0_init();
platform_device_register(&mv88f6281gtw_ge_leds);
platform_device_register(&mv88f6281gtw_ge_buttons);
}
static int __init mv88f6281gtw_ge_pci_init(void)
{
if (machine_is_mv88f6281gtw_ge())
kirkwood_pcie_init(KW_PCIE0);
return 0;
}
subsys_initcall(mv88f6281gtw_ge_pci_init);
MACHINE_START(MV88F6281GTW_GE, "Marvell 88F6281 GTW GE Board")
/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
.atag_offset = 0x100,
.init_machine = mv88f6281gtw_ge_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.init_time = kirkwood_timer_init,
.restart = kirkwood_restart,
MACHINE_END
arch/arm/mach-kirkwood/netspace_v2-setup.c deleted 100644 → 0
View file @ b4b50fd7
/*
* arch/arm/mach-kirkwood/netspace_v2-setup.c
*
* LaCie Network Space v2 board setup
*
* Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
* Copyright (C) 2009 Benoît Canet <benoit.canet@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
#include <linux/input.h>
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/leds.h>
#include <linux/gpio-fan.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
#include <linux/platform_data/leds-kirkwood-ns2.h>
#include "common.h"
#include "mpp.h"
#include "lacie_v2-common.h"
/*****************************************************************************
* Ethernet
****************************************************************************/
static struct mv643xx_eth_platform_data netspace_v2_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
};
/*****************************************************************************
* SATA
****************************************************************************/
static struct mv_sata_platform_data netspace_v2_sata_data = {
.n_ports = 2,
};
/*****************************************************************************
* GPIO keys
****************************************************************************/
#define NETSPACE_V2_PUSH_BUTTON 32
static struct gpio_keys_button netspace_v2_buttons[] = {
[0] = {
.code = KEY_POWER,
.gpio = NETSPACE_V2_PUSH_BUTTON,
.desc = "Power push button",
.active_low = 0,
},
};
static struct gpio_keys_platform_data netspace_v2_button_data = {
.buttons = netspace_v2_buttons,
.nbuttons = ARRAY_SIZE(netspace_v2_buttons),
};
static struct platform_device netspace_v2_gpio_buttons = {
.name = "gpio-keys",
.id = -1,
.dev = {
.platform_data = &netspace_v2_button_data,
},
};
/*****************************************************************************
* GPIO LEDs
****************************************************************************/
#define NETSPACE_V2_GPIO_RED_LED 12
static struct gpio_led netspace_v2_gpio_led_pins[] = {
{
.name = "ns_v2:red:fail",
.gpio = NETSPACE_V2_GPIO_RED_LED,
},
};
static struct gpio_led_platform_data netspace_v2_gpio_leds_data = {
.num_leds = ARRAY_SIZE(netspace_v2_gpio_led_pins),
.leds = netspace_v2_gpio_led_pins,
};
static struct platform_device netspace_v2_gpio_leds = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &netspace_v2_gpio_leds_data,
},
};
/*****************************************************************************
* Dual-GPIO CPLD LEDs
****************************************************************************/
#define NETSPACE_V2_GPIO_BLUE_LED_SLOW 29
#define NETSPACE_V2_GPIO_BLUE_LED_CMD 30
static struct ns2_led netspace_v2_led_pins[] = {
{
.name = "ns_v2:blue:sata",
.cmd = NETSPACE_V2_GPIO_BLUE_LED_CMD,
.slow = NETSPACE_V2_GPIO_BLUE_LED_SLOW,
},
};
static struct ns2_led_platform_data netspace_v2_leds_data = {
.num_leds = ARRAY_SIZE(netspace_v2_led_pins),
.leds = netspace_v2_led_pins,
};
static struct platform_device netspace_v2_leds = {
.name = "leds-ns2",
.id = -1,
.dev = {
.platform_data = &netspace_v2_leds_data,
},
};
/*****************************************************************************
* GPIO fan
****************************************************************************/
/* Designed for fan 40x40x16: ADDA AD0412LB-D50 6000rpm@12v */
static struct gpio_fan_speed netspace_max_v2_fan_speed[] = {
{ 0, 0 },
{ 1500, 15 },
{ 1700, 14 },
{ 1800, 13 },
{ 2100, 12 },
{ 3100, 11 },
{ 3300, 10 },
{ 4300, 9 },
{ 5500, 8 },
};
static unsigned netspace_max_v2_fan_ctrl[] = { 22, 7, 33, 23 };
static struct gpio_fan_alarm netspace_max_v2_fan_alarm = {
.gpio = 25,
.active_low = 1,
};
static struct gpio_fan_platform_data netspace_max_v2_fan_data = {
.num_ctrl = ARRAY_SIZE(netspace_max_v2_fan_ctrl),
.ctrl = netspace_max_v2_fan_ctrl,
.alarm = &netspace_max_v2_fan_alarm,
.num_speed = ARRAY_SIZE(netspace_max_v2_fan_speed),
.speed = netspace_max_v2_fan_speed,
};
static struct platform_device netspace_max_v2_gpio_fan = {
.name = "gpio-fan",
.id = -1,
.dev = {
.platform_data = &netspace_max_v2_fan_data,
},
};
/*****************************************************************************
* General Setup
****************************************************************************/
static unsigned int netspace_v2_mpp_config[] __initdata = {
MPP0_SPI_SCn,
MPP1_SPI_MOSI,
MPP2_SPI_SCK,
MPP3_SPI_MISO,
MPP4_NF_IO6,
MPP5_NF_IO7,
MPP6_SYSRST_OUTn,
MPP7_GPO, /* Fan speed (bit 1) */
MPP8_TW0_SDA,
MPP9_TW0_SCK,
MPP10_UART0_TXD,
MPP11_UART0_RXD,
MPP12_GPO, /* Red led */
MPP14_GPIO, /* USB fuse */
MPP16_GPIO, /* SATA 0 power */
MPP17_GPIO, /* SATA 1 power */
MPP18_NF_IO0,
MPP19_NF_IO1,
MPP20_SATA1_ACTn,
MPP21_SATA0_ACTn,
MPP22_GPIO, /* Fan speed (bit 0) */
MPP23_GPIO, /* Fan power */
MPP24_GPIO, /* USB mode select */
MPP25_GPIO, /* Fan rotation fail */
MPP26_GPIO, /* USB device vbus */
MPP28_GPIO, /* USB enable host vbus */
MPP29_GPIO, /* Blue led (slow register) */
MPP30_GPIO, /* Blue led (command register) */
MPP31_GPIO, /* Board power off */
MPP32_GPIO, /* Power button (0 = Released, 1 = Pushed) */
MPP33_GPO, /* Fan speed (bit 2) */
0
};
#define NETSPACE_V2_GPIO_POWER_OFF 31
static void netspace_v2_power_off(void)
{
gpio_set_value(NETSPACE_V2_GPIO_POWER_OFF, 1);
}
static void __init netspace_v2_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
kirkwood_init();
kirkwood_mpp_conf(netspace_v2_mpp_config);
if (machine_is_netspace_max_v2())
lacie_v2_hdd_power_init(2);
else
lacie_v2_hdd_power_init(1);
kirkwood_ehci_init();
kirkwood_ge00_init(&netspace_v2_ge00_data);
kirkwood_sata_init(&netspace_v2_sata_data);
kirkwood_uart0_init();
lacie_v2_register_flash();
lacie_v2_register_i2c_devices();
platform_device_register(&netspace_v2_leds);
platform_device_register(&netspace_v2_gpio_leds);
platform_device_register(&netspace_v2_gpio_buttons);
if (machine_is_netspace_max_v2())
platform_device_register(&netspace_max_v2_gpio_fan);
if (gpio_request(NETSPACE_V2_GPIO_POWER_OFF, "power-off") == 0 &&
gpio_direction_output(NETSPACE_V2_GPIO_POWER_OFF, 0) == 0)
pm_power_off = netspace_v2_power_off;
else
pr_err("netspace_v2: failed to configure power-off GPIO\n");
}
#ifdef CONFIG_MACH_NETSPACE_V2
MACHINE_START(NETSPACE_V2, "LaCie Network Space v2")
.atag_offset = 0x100,
.init_machine = netspace_v2_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.init_time = kirkwood_timer_init,
.restart = kirkwood_restart,
MACHINE_END
#endif
#ifdef CONFIG_MACH_INETSPACE_V2
MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2")
.atag_offset = 0x100,
.init_machine = netspace_v2_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.init_time = kirkwood_timer_init,
.restart = kirkwood_restart,
MACHINE_END
#endif
#ifdef CONFIG_MACH_NETSPACE_MAX_V2
MACHINE_START(NETSPACE_MAX_V2, "LaCie Network Space Max v2")
.atag_offset = 0x100,
.init_machine = netspace_v2_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.init_time = kirkwood_timer_init,
.restart = kirkwood_restart,
MACHINE_END
#endif
arch/arm/mach-kirkwood/openrd-setup.c
View file @ 44598f98
......@@ -158,7 +158,8 @@ static void __init openrd_init(void)
kirkwood_mpp_conf(openrd_mpp_config);
kirkwood_uart0_init();
kirkwood_nand_init(ARRAY_AND_SIZE(openrd_nand_parts), 25);
kirkwood_nand_init(openrd_nand_parts, ARRAY_SIZE(openrd_nand_parts),
25);
kirkwood_ehci_init();
......
arch/arm/mach-kirkwood/rd88f6281-setup.c
View file @ 44598f98
......@@ -87,7 +87,9 @@ static void __init rd88f6281_init(void)
kirkwood_init();
kirkwood_mpp_conf(rd88f6281_mpp_config);
kirkwood_nand_init(ARRAY_AND_SIZE(rd88f6281_nand_parts), 25);
kirkwood_nand_init(rd88f6281_nand_parts,
ARRAY_SIZE(rd88f6281_nand_parts),
25);
kirkwood_ehci_init();
kirkwood_ge00_init(&rd88f6281_ge00_data);
......
arch/arm/mach-kirkwood/sheevaplug-setup.c deleted 100644 → 0
View file @ b4b50fd7
/*
* arch/arm/mach-kirkwood/sheevaplug-setup.c
*
* Marvell SheevaPlug Reference Board Setup
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
#include <linux/mtd/partitions.h>
#include <linux/mv643xx_eth.h>
#include <linux/gpio.h>
#include <linux/leds.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
#include <linux/platform_data/mmc-mvsdio.h>
#include "common.h"
#include "mpp.h"
static struct mtd_partition sheevaplug_nand_parts[] = {
{
.name = "u-boot",
.offset = 0,
.size = SZ_1M
}, {
.name = "uImage",
.offset = MTDPART_OFS_NXTBLK,
.size = SZ_4M
}, {
.name = "root",
.offset = MTDPART_OFS_NXTBLK,
.size = MTDPART_SIZ_FULL
},
};
static struct mv643xx_eth_platform_data sheevaplug_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(0),
};
static struct mv_sata_platform_data sheeva_esata_sata_data = {
.n_ports = 2,
};
static struct mvsdio_platform_data sheevaplug_mvsdio_data = {
/* unfortunately the CD signal has not been connected */
};
static struct mvsdio_platform_data sheeva_esata_mvsdio_data = {
.gpio_write_protect = 44, /* MPP44 used as SD write protect */
.gpio_card_detect = 47, /* MPP47 used as SD card detect */
};
static struct gpio_led sheevaplug_led_pins[] = {
{
.name = "plug:red:misc",
.default_trigger = "none",
.gpio = 46,
.active_low = 1,
},
{
.name = "plug:green:health",
.default_trigger = "default-on",
.gpio = 49,
.active_low = 1,
},
};
static struct gpio_led_platform_data sheevaplug_led_data = {
.leds = sheevaplug_led_pins,
.num_leds = ARRAY_SIZE(sheevaplug_led_pins),
};
static struct platform_device sheevaplug_leds = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &sheevaplug_led_data,
}
};
static unsigned int sheevaplug_mpp_config[] __initdata = {
MPP29_GPIO, /* USB Power Enable */
MPP46_GPIO, /* LED Red */
MPP49_GPIO, /* LED */
0
};
static unsigned int sheeva_esata_mpp_config[] __initdata = {
MPP29_GPIO, /* USB Power Enable */
MPP44_GPIO, /* SD Write Protect */
MPP47_GPIO, /* SD Card Detect */
MPP49_GPIO, /* LED Green */
0
};
static void __init sheevaplug_init(void)
{
/*
* Basic setup. Needs to be called early.
*/
kirkwood_init();
/* setup gpio pin select */
if (machine_is_esata_sheevaplug())
kirkwood_mpp_conf(sheeva_esata_mpp_config);
else
kirkwood_mpp_conf(sheevaplug_mpp_config);
kirkwood_uart0_init();
kirkwood_nand_init(ARRAY_AND_SIZE(sheevaplug_nand_parts), 25);
if (gpio_request(29, "USB Power Enable") != 0 ||
gpio_direction_output(29, 1) != 0)
pr_err("can't set up GPIO 29 (USB Power Enable)\n");
kirkwood_ehci_init();
kirkwood_ge00_init(&sheevaplug_ge00_data);
/* honor lower power consumption for plugs with out eSATA */
if (machine_is_esata_sheevaplug())
kirkwood_sata_init(&sheeva_esata_sata_data);
/* enable sd wp and sd cd on plugs with esata */
if (machine_is_esata_sheevaplug())
kirkwood_sdio_init(&sheeva_esata_mvsdio_data);
else
kirkwood_sdio_init(&sheevaplug_mvsdio_data);
platform_device_register(&sheevaplug_leds);
}
#ifdef CONFIG_MACH_SHEEVAPLUG
MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board")
/* Maintainer: shadi Ammouri <shadi@marvell.com> */
.atag_offset = 0x100,
.init_machine = sheevaplug_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.init_time = kirkwood_timer_init,
.restart = kirkwood_restart,
MACHINE_END
#endif
#ifdef CONFIG_MACH_ESATA_SHEEVAPLUG
MACHINE_START(ESATA_SHEEVAPLUG, "Marvell eSATA SheevaPlug Reference Board")
.atag_offset = 0x100,
.init_machine = sheevaplug_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
.init_irq = kirkwood_init_irq,
.init_time = kirkwood_timer_init,
.restart = kirkwood_restart,
MACHINE_END
#endif
arch/arm/mach-orion5x/edmini_v2-setup.c
View file @ 44598f98
......@@ -23,8 +23,8 @@
#include <linux/platform_device.h>
#include <linux/pci.h>
#include <linux/irq.h>
#include <linux/mbus.h>
#include <linux/mtd/physmap.h>
#include <linux/mv643xx_eth.h>
#include <linux/leds.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
......@@ -95,14 +95,6 @@ static struct platform_device edmini_v2_nor_flash = {
.resource = &edmini_v2_nor_flash_resource,
};
/*****************************************************************************
* Ethernet
****************************************************************************/
static struct mv643xx_eth_platform_data edmini_v2_eth_data = {
.phy_addr = 8,
};
/*****************************************************************************
* RTC 5C372a on I2C bus
****************************************************************************/
......@@ -152,7 +144,6 @@ void __init edmini_v2_init(void)
* Configure peripherals.
*/
orion5x_ehci0_init();
orion5x_eth_init(&edmini_v2_eth_data);
mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
ORION_MBUS_DEVBUS_BOOT_ATTR,
......
arch/arm/mach-shmobile/Kconfig
View file @ 44598f98
......@@ -162,6 +162,7 @@ config MACH_BOCKW
depends on ARCH_R8A7778
select ARCH_REQUIRE_GPIOLIB
select RENESAS_INTC_IRQPIN
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select USE_OF
config MACH_MARZEN
......
arch/arm/mach-shmobile/board-ag5evm.c
View file @ 44598f98
......@@ -41,6 +41,7 @@
#include <linux/mmc/sh_mmcif.h>
#include <linux/mmc/sh_mobile_sdhi.h>
#include <linux/mfd/tmio.h>
#include <linux/platform_data/bd6107.h>
#include <linux/sh_clk.h>
#include <linux/irqchip/arm-gic.h>
#include <video/sh_mobile_lcdc.h>
......@@ -291,47 +292,7 @@ static struct platform_device mipidsi0_device = {
},
};
static unsigned char lcd_backlight_seq[3][2] = {
{ 0x04, 0x07 },
{ 0x23, 0x80 },
{ 0x03, 0x01 },
};
static int lcd_backlight_set_brightness(int brightness)
{
struct i2c_adapter *adap;
struct i2c_msg msg;
unsigned int i;
int ret;
if (brightness == 0) {
/* Reset the chip */
gpio_set_value(235, 0);
mdelay(24);
gpio_set_value(235, 1);
return 0;
}
adap = i2c_get_adapter(1);
if (adap == NULL)
return -ENODEV;
for (i = 0; i < ARRAY_SIZE(lcd_backlight_seq); i++) {
msg.addr = 0x6d;
msg.buf = &lcd_backlight_seq[i][0];
msg.len = 2;
msg.flags = 0;
ret = i2c_transfer(adap, &msg, 1);
if (ret < 0)
break;
}
i2c_put_adapter(adap);
return ret < 0 ? ret : 0;
}
/* LCDC0 */
/* LCDC0 and backlight */
static const struct fb_videomode lcdc0_modes[] = {
{
.name = "R63302(QHD)",
......@@ -361,11 +322,6 @@ static struct sh_mobile_lcdc_info lcdc0_info = {
.width = 44,
.height = 79,
},
.bl_info = {
.name = "sh_mobile_lcdc_bl",
.max_brightness = 1,
.set_brightness = lcd_backlight_set_brightness,
},
.tx_dev = &mipidsi0_device,
}
};
......@@ -394,6 +350,17 @@ static struct platform_device lcdc0_device = {
},
};
static struct bd6107_platform_data backlight_data = {
.fbdev = &lcdc0_device.dev,
.reset = 235,
.def_value = 0,
};
static struct i2c_board_info backlight_board_info = {
I2C_BOARD_INFO("bd6107", 0x6d),
.platform_data = &backlight_data,
};
/* Fixed 2.8V regulators to be used by SDHI0 */
static struct regulator_consumer_supply fixed2v8_power_consumers[] =
{
......@@ -648,15 +615,15 @@ static void __init ag5evm_init(void)
gpio_set_value(217, 1);
mdelay(100);
/* LCD backlight controller */
gpio_request_one(235, GPIOF_OUT_INIT_LOW, NULL); /* RESET */
lcd_backlight_set_brightness(0);
#ifdef CONFIG_CACHE_L2X0
/* Shared attribute override enable, 64K*8way */
l2x0_init(IOMEM(0xf0100000), 0x00460000, 0xc2000fff);
#endif
sh73a0_add_standard_devices();
i2c_register_board_info(1, &backlight_board_info, 1);
platform_add_devices(ag5evm_devices, ARRAY_SIZE(ag5evm_devices));
}
......
arch/arm/mach-shmobile/board-ape6evm.c
View file @ 44598f98
......@@ -19,8 +19,14 @@
*/
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/mfd/tmio.h>
#include <linux/mmc/host.h>
#include <linux/mmc/sh_mmcif.h>
#include <linux/mmc/sh_mobile_sdhi.h>
#include <linux/pinctrl/machine.h>
#include <linux/platform_device.h>
#include <linux/regulator/fixed.h>
......@@ -33,6 +39,58 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
/* LEDS */
static struct gpio_led ape6evm_leds[] = {
{
.name = "gnss-en",
.gpio = 28,
.default_state = LEDS_GPIO_DEFSTATE_OFF,
}, {
.name = "nfc-nrst",
.gpio = 126,
.default_state = LEDS_GPIO_DEFSTATE_OFF,
}, {
.name = "gnss-nrst",
.gpio = 132,
.default_state = LEDS_GPIO_DEFSTATE_OFF,
}, {
.name = "bt-wakeup",
.gpio = 232,
.default_state = LEDS_GPIO_DEFSTATE_OFF,
}, {
.name = "strobe",
.gpio = 250,
.default_state = LEDS_GPIO_DEFSTATE_OFF,
}, {
.name = "bbresetout",
.gpio = 288,
.default_state = LEDS_GPIO_DEFSTATE_OFF,
},
};
static __initdata struct gpio_led_platform_data ape6evm_leds_pdata = {
.leds = ape6evm_leds,
.num_leds = ARRAY_SIZE(ape6evm_leds),
};
/* GPIO KEY */
#define GPIO_KEY(c, g, d, ...) \
{ .code = c, .gpio = g, .desc = d, .active_low = 1 }
static struct gpio_keys_button gpio_buttons[] = {
GPIO_KEY(KEY_0, 324, "S16"),
GPIO_KEY(KEY_MENU, 325, "S17"),
GPIO_KEY(KEY_HOME, 326, "S18"),
GPIO_KEY(KEY_BACK, 327, "S19"),
GPIO_KEY(KEY_VOLUMEUP, 328, "S20"),
GPIO_KEY(KEY_VOLUMEDOWN, 329, "S21"),
};
static struct __initdata gpio_keys_platform_data ape6evm_keys_pdata = {
.buttons = gpio_buttons,
.nbuttons = ARRAY_SIZE(gpio_buttons),
};
/* Dummy supplies, where voltage doesn't matter */
static struct regulator_consumer_supply dummy_supplies[] = {
REGULATOR_SUPPLY("vddvario", "smsc911x"),
......@@ -40,7 +98,7 @@ static struct regulator_consumer_supply dummy_supplies[] = {
};
/* SMSC LAN9220 */
static const struct resource lan9220_res[] = {
static const struct resource lan9220_res[] __initconst = {
DEFINE_RES_MEM(0x08000000, 0x1000),
{
.start = irq_pin(40), /* IRQ40 */
......@@ -48,19 +106,83 @@ static const struct resource lan9220_res[] = {
},
};
static const struct smsc911x_platform_config lan9220_data = {
static const struct smsc911x_platform_config lan9220_data __initconst = {
.flags = SMSC911X_USE_32BIT,
.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
};
static const struct pinctrl_map ape6evm_pinctrl_map[] = {
/*
* On APE6EVM power is supplied to MMCIF by a tps80032 regulator. For now we
* model a VDD supply to MMCIF, using a fixed 3.3V regulator. Also use the
* static power supply for SDHI0 and SDHI1, whereas SDHI0's VccQ is also
* supplied by the same tps80032 regulator and thus can also be adjusted
* dynamically.
*/
static struct regulator_consumer_supply fixed3v3_power_consumers[] =
{
REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
};
/* MMCIF */
static const struct sh_mmcif_plat_data mmcif0_pdata __initconst = {
.caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
};
static const struct resource mmcif0_resources[] __initconst = {
DEFINE_RES_MEM_NAMED(0xee200000, 0x100, "MMCIF0"),
DEFINE_RES_IRQ(gic_spi(169)),
};
/* SDHI0 */
static const struct sh_mobile_sdhi_info sdhi0_pdata __initconst = {
.tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_WRPROTECT_DISABLE,
.tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ,
};
static const struct resource sdhi0_resources[] __initconst = {
DEFINE_RES_MEM_NAMED(0xee100000, 0x100, "SDHI0"),
DEFINE_RES_IRQ(gic_spi(165)),
};
/* SDHI1 */
static const struct sh_mobile_sdhi_info sdhi1_pdata __initconst = {
.tmio_flags = TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_WRPROTECT_DISABLE,
.tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
MMC_CAP_NEEDS_POLL,
};
static const struct resource sdhi1_resources[] __initconst = {
DEFINE_RES_MEM_NAMED(0xee120000, 0x100, "SDHI1"),
DEFINE_RES_IRQ(gic_spi(166)),
};
static const struct pinctrl_map ape6evm_pinctrl_map[] __initconst = {
/* SCIFA0 console */
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a73a4",
"scifa0_data", "scifa0"),
/* SMSC */
PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a73a4",
"irqc_irq40", "irqc"),
/* MMCIF0 */
PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-r8a73a4",
"mmc0_data8", "mmc0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-r8a73a4",
"mmc0_ctrl", "mmc0"),
/* SDHI0: uSD: no WP */
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a73a4",
"sdhi0_data4", "sdhi0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a73a4",
"sdhi0_ctrl", "sdhi0"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a73a4",
"sdhi0_cd", "sdhi0"),
/* SDHI1 */
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a73a4",
"sdhi1_data4", "sdhi1"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a73a4",
"sdhi1_ctrl", "sdhi1"),
};
static void __init ape6evm_add_standard_devices(void)
......@@ -93,6 +215,23 @@ static void __init ape6evm_add_standard_devices(void)
platform_device_register_resndata(&platform_bus, "smsc911x", -1,
lan9220_res, ARRAY_SIZE(lan9220_res),
&lan9220_data, sizeof(lan9220_data));
regulator_register_always_on(1, "fixed-3.3V", fixed3v3_power_consumers,
ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
platform_device_register_resndata(&platform_bus, "sh_mmcif", 0,
mmcif0_resources, ARRAY_SIZE(mmcif0_resources),
&mmcif0_pdata, sizeof(mmcif0_pdata));
platform_device_register_resndata(&platform_bus, "sh_mobile_sdhi", 0,
sdhi0_resources, ARRAY_SIZE(sdhi0_resources),
&sdhi0_pdata, sizeof(sdhi0_pdata));
platform_device_register_resndata(&platform_bus, "sh_mobile_sdhi", 1,
sdhi1_resources, ARRAY_SIZE(sdhi1_resources),
&sdhi1_pdata, sizeof(sdhi1_pdata));
platform_device_register_data(&platform_bus, "gpio-keys", -1,
&ape6evm_keys_pdata,
sizeof(ape6evm_keys_pdata));
platform_device_register_data(&platform_bus, "leds-gpio", -1,
&ape6evm_leds_pdata,
sizeof(ape6evm_leds_pdata));
}
static const char *ape6evm_boards_compat_dt[] __initdata = {
......
arch/arm/mach-shmobile/board-armadillo800eva.c
View file @ 44598f98
......@@ -31,6 +31,8 @@
#include <linux/gpio_keys.h>
#include <linux/regulator/driver.h>
#include <linux/pinctrl/machine.h>
#include <linux/platform_data/pwm-renesas-tpu.h>
#include <linux/pwm_backlight.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/gpio-regulator.h>
#include <linux/regulator/machine.h>
......@@ -386,7 +388,50 @@ static struct platform_device sh_eth_device = {
.num_resources = ARRAY_SIZE(sh_eth_resources),
};
/* LCDC */
/* PWM */
static struct resource pwm_resources[] = {
[0] = {
.start = 0xe6600000,
.end = 0xe66000ff,
.flags = IORESOURCE_MEM,
},
};
static struct tpu_pwm_platform_data pwm_device_data = {
.channels[2] = {
.polarity = PWM_POLARITY_INVERSED,
}
};
static struct platform_device pwm_device = {
.name = "renesas-tpu-pwm",
.id = -1,
.dev = {
.platform_data = &pwm_device_data,
},
.num_resources = ARRAY_SIZE(pwm_resources),
.resource = pwm_resources,
};
static struct pwm_lookup pwm_lookup[] = {
PWM_LOOKUP("renesas-tpu-pwm", 2, "pwm-backlight.0", NULL),
};
/* LCDC and backlight */
static struct platform_pwm_backlight_data pwm_backlight_data = {
.lth_brightness = 50,
.max_brightness = 255,
.dft_brightness = 255,
.pwm_period_ns = 33333, /* 30kHz */
};
static struct platform_device pwm_backlight_device = {
.name = "pwm-backlight",
.dev = {
.platform_data = &pwm_backlight_data,
},
};
static struct fb_videomode lcdc0_mode = {
.name = "AMPIER/AM-800480",
.xres = 800,
......@@ -778,6 +823,8 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = {
.caps = MMC_CAP_4_BIT_DATA |
MMC_CAP_8_BIT_DATA |
MMC_CAP_NONREMOVABLE,
.slave_id_tx = SHDMA_SLAVE_MMCIF_TX,
.slave_id_rx = SHDMA_SLAVE_MMCIF_RX,
};
static struct resource sh_mmcif_resources[] = {
......@@ -1020,6 +1067,8 @@ static struct i2c_board_info i2c2_devices[] = {
*/
static struct platform_device *eva_devices[] __initdata = {
&lcdc0_device,
&pwm_device,
&pwm_backlight_device,
&gpio_keys_device,
&sh_eth_device,
&vcc_sdhi0,
......@@ -1091,6 +1140,9 @@ static const struct pinctrl_map eva_pinctrl_map[] = {
/* ST1232 */
PIN_MAP_MUX_GROUP_DEFAULT("0-0055", "pfc-r8a7740",
"intc_irq10", "intc"),
/* TPU0 */
PIN_MAP_MUX_GROUP_DEFAULT("renesas-tpu-pwm", "pfc-r8a7740",
"tpu0_to2_1", "tpu0"),
/* USBHS */
PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs", "pfc-r8a7740",
"intc_irq7_1", "intc"),
......@@ -1144,13 +1196,13 @@ static void __init eva_init(void)
ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
pinctrl_register_mappings(eva_pinctrl_map, ARRAY_SIZE(eva_pinctrl_map));
pwm_add_table(pwm_lookup, ARRAY_SIZE(pwm_lookup));
r8a7740_pinmux_init();
r8a7740_meram_workaround();
/* LCDC0 */
gpio_request_one(61, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */
gpio_request_one(202, GPIOF_OUT_INIT_LOW, NULL); /* LCD0_LED_CONT */
/* GETHER */
gpio_request_one(18, GPIOF_OUT_INIT_HIGH, NULL); /* PHY_RST */
......
arch/arm/mach-shmobile/board-kota2.c
View file @ 44598f98
......@@ -26,6 +26,7 @@
#include <linux/irq.h>
#include <linux/pinctrl/machine.h>
#include <linux/pinctrl/pinconf-generic.h>
#include <linux/platform_data/pwm-renesas-tpu.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/io.h>
......@@ -37,8 +38,8 @@
#include <linux/input/sh_keysc.h>
#include <linux/gpio_keys.h>
#include <linux/leds.h>
#include <linux/leds_pwm.h>
#include <linux/irqchip/arm-gic.h>
#include <linux/platform_data/leds-renesas-tpu.h>
#include <linux/mmc/host.h>
#include <linux/mmc/sh_mmcif.h>
#include <linux/mfd/tmio.h>
......@@ -186,116 +187,100 @@ static struct platform_device gpio_leds_device = {
};
/* TPU LED */
static struct led_renesas_tpu_config led_renesas_tpu12_pdata = {
.name = "V2513",
.pin_gpio_fn = GPIO_FN_TPU1TO2,
.pin_gpio = 153,
.channel_offset = 0x90,
.timer_bit = 2,
.max_brightness = 1000,
};
static struct resource tpu12_resources[] = {
static struct resource tpu1_pwm_resources[] = {
[0] = {
.name = "TPU12",
.start = 0xe6610090,
.end = 0xe66100b5,
.start = 0xe6610000,
.end = 0xe66100ff,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device leds_tpu12_device = {
.name = "leds-renesas-tpu",
.id = 12,
.dev = {
.platform_data = &led_renesas_tpu12_pdata,
},
.num_resources = ARRAY_SIZE(tpu12_resources),
.resource = tpu12_resources,
};
static struct led_renesas_tpu_config led_renesas_tpu41_pdata = {
.name = "V2514",
.pin_gpio_fn = GPIO_FN_TPU4TO1,
.pin_gpio = 199,
.channel_offset = 0x50,
.timer_bit = 1,
.max_brightness = 1000,
static struct platform_device tpu1_pwm_device = {
.name = "renesas-tpu-pwm",
.id = 1,
.num_resources = ARRAY_SIZE(tpu1_pwm_resources),
.resource = tpu1_pwm_resources,
};
static struct resource tpu41_resources[] = {
static struct resource tpu2_pwm_resources[] = {
[0] = {
.name = "TPU41",
.start = 0xe6640050,
.end = 0xe6640075,
.start = 0xe6620000,
.end = 0xe66200ff,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device leds_tpu41_device = {
.name = "leds-renesas-tpu",
.id = 41,
.dev = {
.platform_data = &led_renesas_tpu41_pdata,
static struct platform_device tpu2_pwm_device = {
.name = "renesas-tpu-pwm",
.id = 2,
.num_resources = ARRAY_SIZE(tpu2_pwm_resources),
.resource = tpu2_pwm_resources,
};
static struct resource tpu3_pwm_resources[] = {
[0] = {
.start = 0xe6630000,
.end = 0xe66300ff,
.flags = IORESOURCE_MEM,
},
.num_resources = ARRAY_SIZE(tpu41_resources),
.resource = tpu41_resources,
};
static struct led_renesas_tpu_config led_renesas_tpu21_pdata = {
.name = "V2515",
.pin_gpio_fn = GPIO_FN_TPU2TO1,
.pin_gpio = 197,
.channel_offset = 0x50,
.timer_bit = 1,
.max_brightness = 1000,
static struct platform_device tpu3_pwm_device = {
.name = "renesas-tpu-pwm",
.id = 3,
.num_resources = ARRAY_SIZE(tpu3_pwm_resources),
.resource = tpu3_pwm_resources,
};
static struct resource tpu21_resources[] = {
static struct resource tpu4_pwm_resources[] = {
[0] = {
.name = "TPU21",
.start = 0xe6620050,
.end = 0xe6620075,
.start = 0xe6640000,
.end = 0xe66400ff,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device leds_tpu21_device = {
.name = "leds-renesas-tpu",
.id = 21,
.dev = {
.platform_data = &led_renesas_tpu21_pdata,
},
.num_resources = ARRAY_SIZE(tpu21_resources),
.resource = tpu21_resources,
static struct platform_device tpu4_pwm_device = {
.name = "renesas-tpu-pwm",
.id = 4,
.num_resources = ARRAY_SIZE(tpu4_pwm_resources),
.resource = tpu4_pwm_resources,
};
static struct pwm_lookup pwm_lookup[] = {
PWM_LOOKUP("renesas-tpu-pwm.1", 2, "leds-pwm.0", "V2513"),
PWM_LOOKUP("renesas-tpu-pwm.2", 1, "leds-pwm.0", "V2515"),
PWM_LOOKUP("renesas-tpu-pwm.3", 0, "leds-pwm.0", "KEYLED"),
PWM_LOOKUP("renesas-tpu-pwm.4", 1, "leds-pwm.0", "V2514"),
};
static struct led_renesas_tpu_config led_renesas_tpu30_pdata = {
static struct led_pwm tpu_pwm_leds[] = {
{
.name = "V2513",
.max_brightness = 1000,
}, {
.name = "V2515",
.max_brightness = 1000,
}, {
.name = "KEYLED",
.pin_gpio_fn = GPIO_FN_TPU3TO0,
.pin_gpio = 163,
.channel_offset = 0x10,
.timer_bit = 0,
.max_brightness = 1000,
}, {
.name = "V2514",
.max_brightness = 1000,
},
};
static struct resource tpu30_resources[] = {
[0] = {
.name = "TPU30",
.start = 0xe6630010,
.end = 0xe6630035,
.flags = IORESOURCE_MEM,
},
static struct led_pwm_platform_data leds_pwm_pdata = {
.num_leds = ARRAY_SIZE(tpu_pwm_leds),
.leds = tpu_pwm_leds,
};
static struct platform_device leds_tpu30_device = {
.name = "leds-renesas-tpu",
.id = 30,
static struct platform_device leds_pwm_device = {
.name = "leds-pwm",
.id = 0,
.dev = {
.platform_data = &led_renesas_tpu30_pdata,
.platform_data = &leds_pwm_pdata,
},
.num_resources = ARRAY_SIZE(tpu30_resources),
.resource = tpu30_resources,
};
/* Fixed 1.8V regulator to be used by MMCIF */
......@@ -426,10 +411,11 @@ static struct platform_device *kota2_devices[] __initdata = {
&keysc_device,
&gpio_keys_device,
&gpio_leds_device,
&leds_tpu12_device,
&leds_tpu41_device,
&leds_tpu21_device,
&leds_tpu30_device,
&tpu1_pwm_device,
&tpu2_pwm_device,
&tpu3_pwm_device,
&tpu4_pwm_device,
&leds_pwm_device,
&mmcif_device,
&sdhi0_device,
&sdhi1_device,
......@@ -512,6 +498,15 @@ static const struct pinctrl_map kota2_pinctrl_map[] = {
"bsc_cs5_a", "bsc"),
PIN_MAP_MUX_GROUP_DEFAULT("smsc911x.0", "pfc-sh73a0",
"bsc_we0", "bsc"),
/* TPU */
PIN_MAP_MUX_GROUP_DEFAULT("renesas-tpu-pwm.1", "pfc-sh73a0",
"tpu1_to2", "tpu1"),
PIN_MAP_MUX_GROUP_DEFAULT("renesas-tpu-pwm.2", "pfc-sh73a0",
"tpu2_to1", "tpu2"),
PIN_MAP_MUX_GROUP_DEFAULT("renesas-tpu-pwm.3", "pfc-sh73a0",
"tpu3_to0", "tpu3"),
PIN_MAP_MUX_GROUP_DEFAULT("renesas-tpu-pwm.4", "pfc-sh73a0",
"tpu4_to1", "tpu4"),
};
static void __init kota2_init(void)
......@@ -524,6 +519,8 @@ static void __init kota2_init(void)
pinctrl_register_mappings(kota2_pinctrl_map,
ARRAY_SIZE(kota2_pinctrl_map));
pwm_add_table(pwm_lookup, ARRAY_SIZE(pwm_lookup));
sh73a0_pinmux_init();
/* SMSC911X */
......
arch/arm/mach-shmobile/board-lager.c
View file @ 44598f98
......@@ -24,10 +24,16 @@
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/leds.h>
#include <linux/mmc/host.h>
#include <linux/mmc/sh_mmcif.h>
#include <linux/pinctrl/machine.h>
#include <linux/platform_data/gpio-rcar.h>
#include <linux/platform_device.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/sh_eth.h>
#include <mach/common.h>
#include <mach/irqs.h>
#include <mach/r8a7790.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
......@@ -70,6 +76,36 @@ static __initdata struct gpio_keys_platform_data lager_keys_pdata = {
.nbuttons = ARRAY_SIZE(gpio_buttons),
};
/* Fixed 3.3V regulator to be used by MMCIF */
static struct regulator_consumer_supply fixed3v3_power_consumers[] =
{
REGULATOR_SUPPLY("vmmc", "sh_mmcif.1"),
};
/* MMCIF */
static struct sh_mmcif_plat_data mmcif1_pdata __initdata = {
.caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
};
static struct resource mmcif1_resources[] __initdata = {
DEFINE_RES_MEM_NAMED(0xee220000, 0x80, "MMCIF1"),
DEFINE_RES_IRQ(gic_spi(170)),
};
/* Ether */
static struct sh_eth_plat_data ether_pdata __initdata = {
.phy = 0x1,
.edmac_endian = EDMAC_LITTLE_ENDIAN,
.register_type = SH_ETH_REG_FAST_RCAR,
.phy_interface = PHY_INTERFACE_MODE_RMII,
.ether_link_active_low = 1,
};
static struct resource ether_resources[] __initdata = {
DEFINE_RES_MEM(0xee700000, 0x400),
DEFINE_RES_IRQ(gic_spi(162)),
};
static const struct pinctrl_map lager_pinctrl_map[] = {
/* SCIF0 (CN19: DEBUG SERIAL0) */
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.6", "pfc-r8a7790",
......@@ -77,6 +113,20 @@ static const struct pinctrl_map lager_pinctrl_map[] = {
/* SCIF1 (CN20: DEBUG SERIAL1) */
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.7", "pfc-r8a7790",
"scif1_data", "scif1"),
/* MMCIF1 */
PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.1", "pfc-r8a7790",
"mmc1_data8", "mmc1"),
PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.1", "pfc-r8a7790",
"mmc1_ctrl", "mmc1"),
/* Ether */
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7790",
"eth_link", "eth"),
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7790",
"eth_mdio", "eth"),
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7790",
"eth_rmii", "eth"),
PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7790",
"intc_irq0", "intc"),
};
static void __init lager_add_standard_devices(void)
......@@ -94,6 +144,16 @@ static void __init lager_add_standard_devices(void)
platform_device_register_data(&platform_bus, "gpio-keys", -1,
&lager_keys_pdata,
sizeof(lager_keys_pdata));
regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
platform_device_register_resndata(&platform_bus, "sh_mmcif", 1,
mmcif1_resources, ARRAY_SIZE(mmcif1_resources),
&mmcif1_pdata, sizeof(mmcif1_pdata));
platform_device_register_resndata(&platform_bus, "r8a7790-ether", -1,
ether_resources,
ARRAY_SIZE(ether_resources),
&ether_pdata, sizeof(ether_pdata));
}
static const char *lager_boards_compat_dt[] __initdata = {
......
arch/arm/mach-shmobile/board-mackerel.c
View file @ 44598f98
......@@ -41,6 +41,7 @@
#include <linux/mtd/physmap.h>
#include <linux/mtd/sh_flctl.h>
#include <linux/pinctrl/machine.h>
#include <linux/platform_data/gpio_backlight.h>
#include <linux/pm_clock.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
......@@ -49,7 +50,6 @@
#include <linux/tca6416_keypad.h>
#include <linux/usb/renesas_usbhs.h>
#include <linux/dma-mapping.h>
#include <video/sh_mobile_hdmi.h>
#include <video/sh_mobile_lcdc.h>
#include <media/sh_mobile_ceu.h>
......@@ -346,7 +346,7 @@ static struct platform_device meram_device = {
},
};
/* LCDC */
/* LCDC and backlight */
static struct fb_videomode mackerel_lcdc_modes[] = {
{
.name = "WVGA Panel",
......@@ -362,13 +362,6 @@ static struct fb_videomode mackerel_lcdc_modes[] = {
},
};
static int mackerel_set_brightness(int brightness)
{
gpio_set_value(31, brightness);
return 0;
}
static const struct sh_mobile_meram_cfg lcd_meram_cfg = {
.icb[0] = {
.meram_size = 0x40,
......@@ -393,11 +386,6 @@ static struct sh_mobile_lcdc_info lcdc_info = {
.width = 152,
.height = 91,
},
.bl_info = {
.name = "sh_mobile_lcdc_bl",
.max_brightness = 1,
.set_brightness = mackerel_set_brightness,
},
.meram_cfg = &lcd_meram_cfg,
}
};
......@@ -425,6 +413,20 @@ static struct platform_device lcdc_device = {
},
};
static struct gpio_backlight_platform_data gpio_backlight_data = {
.fbdev = &lcdc_device.dev,
.gpio = 31,
.def_value = 1,
.name = "backlight",
};
static struct platform_device gpio_backlight_device = {
.name = "gpio-backlight",
.dev = {
.platform_data = &gpio_backlight_data,
},
};
/* HDMI */
static struct sh_mobile_hdmi_info hdmi_info = {
.flags = HDMI_SND_SRC_SPDIF,
......@@ -1231,6 +1233,7 @@ static struct platform_device *mackerel_devices[] __initdata = {
&nor_flash_device,
&smc911x_device,
&lcdc_device,
&gpio_backlight_device,
&usbhs0_device,
&usbhs1_device,
&leds_device,
......@@ -1441,9 +1444,6 @@ static void __init mackerel_init(void)
ARRAY_SIZE(mackerel_pinctrl_map));
sh7372_pinmux_init();
/* backlight, off by default */
gpio_request_one(31, GPIOF_OUT_INIT_LOW, NULL);
gpio_request_one(151, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */
/* USBHS0 */
......
arch/arm/mach-shmobile/clock-sh73a0.c
View file @ 44598f98
......@@ -555,7 +555,7 @@ enum { MSTP001,
MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
MSTP331, MSTP329, MSTP328, MSTP325, MSTP323, MSTP322,
MSTP314, MSTP313, MSTP312, MSTP311,
MSTP303, MSTP302, MSTP301, MSTP300,
MSTP304, MSTP303, MSTP302, MSTP301, MSTP300,
MSTP411, MSTP410, MSTP403,
MSTP_NR };
......@@ -593,6 +593,7 @@ static struct clk mstp_clks[MSTP_NR] = {
[MSTP313] = MSTP(&div6_clks[DIV6_SDHI1], SMSTPCR3, 13, 0), /* SDHI1 */
[MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMCIF0 */
[MSTP311] = MSTP(&div6_clks[DIV6_SDHI2], SMSTPCR3, 11, 0), /* SDHI2 */
[MSTP304] = MSTP(&main_div2_clk, SMSTPCR3, 4, 0), /* TPU0 */
[MSTP303] = MSTP(&main_div2_clk, SMSTPCR3, 3, 0), /* TPU1 */
[MSTP302] = MSTP(&main_div2_clk, SMSTPCR3, 2, 0), /* TPU2 */
[MSTP301] = MSTP(&main_div2_clk, SMSTPCR3, 1, 0), /* TPU3 */
......@@ -669,10 +670,11 @@ static struct clk_lookup lookups[] = {
CLKDEV_DEV_ID("e6bd0000.mmcif", &mstp_clks[MSTP312]), /* MMCIF0 */
CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP311]), /* SDHI2 */
CLKDEV_DEV_ID("ee140000.sdhi", &mstp_clks[MSTP311]), /* SDHI2 */
CLKDEV_DEV_ID("leds-renesas-tpu.12", &mstp_clks[MSTP303]), /* TPU1 */
CLKDEV_DEV_ID("leds-renesas-tpu.21", &mstp_clks[MSTP302]), /* TPU2 */
CLKDEV_DEV_ID("leds-renesas-tpu.30", &mstp_clks[MSTP301]), /* TPU3 */
CLKDEV_DEV_ID("leds-renesas-tpu.41", &mstp_clks[MSTP300]), /* TPU4 */
CLKDEV_DEV_ID("renesas-tpu-pwm.0", &mstp_clks[MSTP304]), /* TPU0 */
CLKDEV_DEV_ID("renesas-tpu-pwm.1", &mstp_clks[MSTP303]), /* TPU1 */
CLKDEV_DEV_ID("renesas-tpu-pwm.2", &mstp_clks[MSTP302]), /* TPU2 */
CLKDEV_DEV_ID("renesas-tpu-pwm.3", &mstp_clks[MSTP301]), /* TPU3 */
CLKDEV_DEV_ID("renesas-tpu-pwm.4", &mstp_clks[MSTP300]), /* TPU4 */
CLKDEV_DEV_ID("i2c-sh_mobile.3", &mstp_clks[MSTP411]), /* I2C3 */
CLKDEV_DEV_ID("e6826000.i2c", &mstp_clks[MSTP411]), /* I2C3 */
CLKDEV_DEV_ID("i2c-sh_mobile.4", &mstp_clks[MSTP410]), /* I2C4 */
......
arch/arm/plat-orion/irq.c
View file @ 44598f98
......@@ -47,7 +47,7 @@ static int __init orion_add_irq_domain(struct device_node *np,
do {
base = of_iomap(np, i);
if (base) {
orion_irq_init(i * 32, base);
orion_irq_init(i * 32, base + 0x04);
i++;
}
} while (base);
......
arch/sh/boards/mach-ecovec24/setup.c
View file @ 44598f98
This diff is collapsed.
arch/sh/boards/mach-kfr2r09/lcd_wqvga.c
View file @ 44598f98
This diff is collapsed.
arch/sh/boards/mach-kfr2r09/setup.c
View file @ 44598f98
This diff is collapsed.
arch/sh/include/mach-kfr2r09/mach/kfr2r09.h
View file @ 44598f98
......@@ -4,13 +4,11 @@
#include <video/sh_mobile_lcdc.h>
#if defined(CONFIG_FB_SH_MOBILE_LCDC) || defined(CONFIG_FB_SH_MOBILE_LCDC_MODULE)
int kfr2r09_lcd_set_brightness(int brightness);
int kfr2r09_lcd_setup(void *sys_ops_handle,
struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
void kfr2r09_lcd_start(void *sys_ops_handle,
struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
#else
static int kfr2r09_lcd_set_brightness(int brightness) {}
static int kfr2r09_lcd_setup(void *sys_ops_handle,
struct sh_mobile_lcdc_sys_bus_ops *sys_ops)
{
......
drivers/clocksource/bcm_kona_timer.c
View file @ 44598f98
This diff is collapsed.
drivers/leds/Kconfig
View file @ 44598f98
This diff is collapsed.
drivers/leds/Makefile
View file @ 44598f98
......@@ -49,7 +49,6 @@ obj-$(CONFIG_LEDS_MC13783) += leds-mc13783.o
obj-$(CONFIG_LEDS_NS2) += leds-ns2.o
obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o
obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.o
obj-$(CONFIG_LEDS_RENESAS_TPU) += leds-renesas-tpu.o
obj-$(CONFIG_LEDS_MAX8997) += leds-max8997.o
obj-$(CONFIG_LEDS_LM355x) += leds-lm355x.o
obj-$(CONFIG_LEDS_BLINKM) += leds-blinkm.o
......
drivers/leds/leds-renesas-tpu.c deleted 100644 → 0
View file @ b4b50fd7
This diff is collapsed.
drivers/mmc/host/sdhci-bcm-kona.c
View file @ 44598f98
This diff is collapsed.
drivers/video/backlight/Kconfig
View file @ 44598f98
This diff is collapsed.
drivers/video/backlight/Makefile
View file @ 44598f98
This diff is collapsed.
drivers/video/backlight/bd6107.c 0 → 100644
View file @ 44598f98
This diff is collapsed.
drivers/video/backlight/gpio_backlight.c 0 → 100644
View file @ 44598f98
This diff is collapsed.
drivers/video/backlight/lv5207lp.c 0 → 100644
View file @ 44598f98
This diff is collapsed.
include/linux/platform_data/bd6107.h 0 → 100644
View file @ 44598f98
This diff is collapsed.
include/linux/platform_data/gpio_backlight.h 0 → 100644
View file @ 44598f98
This diff is collapsed.
include/linux/platform_data/leds-renesas-tpu.h deleted 100644 → 0
View file @ b4b50fd7
This diff is collapsed.
include/linux/platform_data/lv5207lp.h 0 → 100644
View file @ 44598f98
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7