r8152: fix the carrier off when autoresuming

netif_carrier_off would be called when autoresuming, even though
the cable is plugged. This causes some applications do relative
actions when detecting the carrier off. Keep the status of the
carrier, and let it be modified when the linking change occurs.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/usb/r8152.c

@@ -1949,10 +1949,34 @@ static void rxdy_gated_en(struct r8152 *tp, bool enable)
 	ocp_write_word(tp, MCU_TYPE_PLA, PLA_MISC_1, ocp_data);
 }
 
+static int rtl_start_rx(struct r8152 *tp)
+{
+	int i, ret = 0;
+
+	INIT_LIST_HEAD(&tp->rx_done);
+	for (i = 0; i < RTL8152_MAX_RX; i++) {
+		INIT_LIST_HEAD(&tp->rx_info[i].list);
+		ret = r8152_submit_rx(tp, &tp->rx_info[i], GFP_KERNEL);
+		if (ret)
+			break;
+	}
+
+	return ret;
+}
+
+static int rtl_stop_rx(struct r8152 *tp)
+{
+	int i;
+
+	for (i = 0; i < RTL8152_MAX_RX; i++)
+		usb_kill_urb(tp->rx_info[i].urb);
+
+	return 0;
+}
+
 static int rtl_enable(struct r8152 *tp)
 {
 	u32 ocp_data;
-	int i, ret;
 
 	r8152b_reset_packet_filter(tp);
 
@@ -1962,14 +1986,7 @@ static int rtl_enable(struct r8152 *tp)
 
 	rxdy_gated_en(tp, false);
 
-	INIT_LIST_HEAD(&tp->rx_done);
-	ret = 0;
-	for (i = 0; i < RTL8152_MAX_RX; i++) {
-		INIT_LIST_HEAD(&tp->rx_info[i].list);
-		ret |= r8152_submit_rx(tp, &tp->rx_info[i], GFP_KERNEL);
-	}
-
-	return ret;
+	return rtl_start_rx(tp);
 }
 
 static int rtl8152_enable(struct r8152 *tp)
@@ -2053,8 +2070,7 @@ static void rtl_disable(struct r8152 *tp)
 		mdelay(1);
 	}
 
-	for (i = 0; i < RTL8152_MAX_RX; i++)
-		usb_kill_urb(tp->rx_info[i].urb);
+	rtl_stop_rx(tp);
 
 	rtl8152_nic_reset(tp);
 }
@@ -3083,13 +3099,14 @@ static int rtl8152_suspend(struct usb_interface *intf, pm_message_t message)
 		clear_bit(WORK_ENABLE, &tp->flags);
 		usb_kill_urb(tp->intr_urb);
 		cancel_delayed_work_sync(&tp->schedule);
+		tasklet_disable(&tp->tl);
 		if (test_bit(SELECTIVE_SUSPEND, &tp->flags)) {
+			rtl_stop_rx(tp);
 			rtl_runtime_suspend_enable(tp, true);
 		} else {
-			tasklet_disable(&tp->tl);
 			tp->rtl_ops.down(tp);
-			tasklet_enable(&tp->tl);
 		}
+		tasklet_enable(&tp->tl);
 	}
 
 	return 0;
@@ -3108,17 +3125,18 @@ static int rtl8152_resume(struct usb_interface *intf)
 		if (test_bit(SELECTIVE_SUSPEND, &tp->flags)) {
 			rtl_runtime_suspend_enable(tp, false);
 			clear_bit(SELECTIVE_SUSPEND, &tp->flags);
+			set_bit(WORK_ENABLE, &tp->flags);
 			if (tp->speed & LINK_STATUS)
-				tp->rtl_ops.disable(tp);
+				rtl_start_rx(tp);
 		} else {
 			tp->rtl_ops.up(tp);
 			rtl8152_set_speed(tp, AUTONEG_ENABLE,
 				tp->mii.supports_gmii ? SPEED_1000 : SPEED_100,
 				DUPLEX_FULL);
-		}
 			tp->speed = 0;
 			netif_carrier_off(tp->netdev);
 			set_bit(WORK_ENABLE, &tp->flags);
+		}
 		usb_submit_urb(tp->intr_urb, GFP_KERNEL);
 	}