Merge tag 'tegra-for-4.21-dt-bindings' of...

Merge tag 'tegra-for-4.21-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt

dt-bindings: Changes for v4.21-rc1

This contains a few cleanups of and additions to existing device tree
bindings, such as XUSB, EMC, PMC and thermal.

* tag 'tegra-for-4.21-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  dt-bindings: tegra186-pmc: Add interrupt controller properties
  dt-bindings: thermal: tegra-bpmp: Add Tegra194 support
  dt: bindings: Move tegra20-emc binding to memory-controllers directory
  dt: bindings: tegra20-emc: Document clock property
  dt: bindings: tegra20-emc: Document interrupt property
  dt-bindings: usb: xhci-tegra: Add power-domain details
Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/arm/tegra/nvidia,tegra186-pmc.txt

@@ -15,6 +15,9 @@ Required properties:
 
 Optional properties:
 - nvidia,invert-interrupt: If present, inverts the PMU interrupt signal.
+- interrupt-controller: Identifies the node as an interrupt controller.
+- #interrupt-cells: Specifies the number of cells needed to encode an
+  interrupt source. The value must be 2.
 
 Example:
 

Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-emc.txt → Documentation/devicetree/bindings/memory-controllers/nvidia,tegra20-emc.txt

@@ -10,6 +10,8 @@ Properties:
   and chosen using the ramcode board selector. If omitted, only one
   set of tables can be present and said tables will be used
   irrespective of ram-code configuration.
+- interrupts : Should contain EMC General interrupt.
+- clocks : Should contain EMC clock.
 
 Child device nodes describe the memory settings for different configurations and clock rates.
 
@@ -20,6 +22,8 @@ Example:
 		#size-cells = < 0 >;
 		compatible = "nvidia,tegra20-emc";
 		reg = <0x7000f4000 0x200>;
+		interrupts = <0 78 0x04>;
+		clocks = <&tegra_car TEGRA20_CLK_EMC>;
 	}
 
 

Documentation/devicetree/bindings/thermal/nvidia,tegra186-bpmp-thermal.txt

@@ -15,7 +15,8 @@ Required properties:
 - compatible:
     Array of strings.
     One of:
-    - "nvidia,tegra186-bpmp-thermal".
+    - "nvidia,tegra186-bpmp-thermal"
+    - "nvidia,tegra194-bpmp-thermal"
 - #thermal-sensor-cells: Cell for sensor index.
     Single-cell integer.
     Must be <1>.

Documentation/devicetree/bindings/usb/nvidia,tegra124-xusb.txt

@@ -59,6 +59,14 @@ For Tegra210:
 - avdd-pll-uerefe-supply: PLLE reference PLL power supply. Must supply 1.05 V.
 - dvdd-pex-pll-supply: PCIe/USB3 PLL power supply. Must supply 1.05 V.
 - hvdd-pex-pll-e-supply: High-voltage PLLE power supply. Must supply 1.8 V.
+- power-domains: A list of PM domain specifiers that reference each power-domain
+  used by the xHCI controller. This list must comprise of a specifier for the
+  XUSBA and XUSBC power-domains. See ../power/power_domain.txt and
+  ../arm/tegra/nvidia,tegra20-pmc.txt for details.
+- power-domain-names: A list of names that represent each of the specifiers in
+  the 'power-domains' property. Must include 'xusb_ss' and 'xusb_host' which
+  represent the power-domains XUSBA and XUSBC, respectively. See
+  ../power/power_domain.txt for details.
 
 Optional properties:
 --------------------

include/dt-bindings/thermal/tegra194-bpmp-thermal.h

+/*
+ * This header provides constants for binding nvidia,tegra194-bpmp-thermal.
+ */
+
+#ifndef _DT_BINDINGS_THERMAL_TEGRA194_BPMP_THERMAL_H
+#define _DT_BINDINGS_THERMAL_TEGRA194_BPMP_THERMAL_H
+
+#define TEGRA194_BPMP_THERMAL_ZONE_CPU 2
+#define TEGRA194_BPMP_THERMAL_ZONE_GPU 3
+#define TEGRA194_BPMP_THERMAL_ZONE_AUX 4
+#define TEGRA194_BPMP_THERMAL_ZONE_PLLX 5
+#define TEGRA194_BPMP_THERMAL_ZONE_AO 6
+#define TEGRA194_BPMP_THERMAL_ZONE_TJ_MAX 7
+
+#endif