Commit 44a390fb authored by Jonathan Bakker's avatar Jonathan Bakker Committed by Krzysztof Kozlowski

ARM: dts: s5pv210: Assign clocks to MMC devices on Aries boards

The SHDCI controller on Aries devices is a little bit peculiar about
the clocks and with a slightly off clock can run into errors such as:

    mmc2: ADMA error: 0x02000000
    mmc2: sdhci: ============ SDHCI REGISTER DUMP ===========
    mmc2: sdhci: Sys addr: 0x347e4cc4 | Version: 0x00002401
    mmc2: sdhci: Blk size: 0x00007004 | Blk cnt: 0x0000fffc
    mmc2: sdhci: Argument: 0x00000000 | Trn mode: 0x00000013
    mmc2: sdhci: Present: 0x01fa0000 | Host ctl: 0x00000012
    mmc2: sdhci: Power: 0x00000000 | Blk gap: 0x00000000
    mmc2: sdhci: Wake-up: 0x00000000 | Clock: 0x0000010f
    mmc2: sdhci: Timeout: 0x0000000a | Int stat: 0x00000003
    mmc2: sdhci: Int enab: 0x03ff004b | Sig enab: 0x03ff004b
    mmc2: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000001
    mmc2: sdhci: Caps: 0x05e80080 | Caps_1: 0x00000000
    mmc2: sdhci: Cmd: 0x0000163a | Max curr: 0x00000000
    mmc2: sdhci: Resp[0]: 0x00000920 | Resp[1]: 0x00000000
    mmc2: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000
    mmc2: sdhci: Host ctl2: 0x00000000
    mmc2: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x349a3208
    mmc2: sdhci: ============================================
    mmc2: sdhci: 349a3200: DMA 0x347e4cc0, LEN 0x0004, Attr=0x23

Specifically assign the MMC sclks to be parented from MPLL with specific
rates that match the vendor kernel.
Signed-off-by: default avatarJonathan Bakker <xc-racer2@live.ca>
Signed-off-by: default avatarKrzysztof Kozlowski <krzk@kernel.org>
parent 07297ea7
......@@ -752,6 +752,10 @@ &sdhci1 {
non-removable;
status = "okay";
assigned-clocks = <&clocks MOUT_MMC1>, <&clocks SCLK_MMC1>;
assigned-clock-rates = <0>, <50000000>;
assigned-clock-parents = <&clocks MOUT_MPLL>;
wlan@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
......@@ -768,6 +772,10 @@ &sdhci2 {
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &tf_detect>;
pinctrl-names = "default";
status = "okay";
assigned-clocks = <&clocks MOUT_MMC2>, <&clocks SCLK_MMC2>;
assigned-clock-rates = <0>, <50000000>;
assigned-clock-parents = <&clocks MOUT_MPLL>;
};
&uart0 {
......
......@@ -355,4 +355,8 @@ &sdhci0 {
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4>;
pinctrl-names = "default";
status = "okay";
assigned-clocks = <&clocks MOUT_MMC0>, <&clocks SCLK_MMC0>;
assigned-clock-rates = <0>, <52000000>;
assigned-clock-parents = <&clocks MOUT_MPLL>;
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment