drm/i915: Merge the PPS register definitions

The PPS registers are pretty much the same everywhere, the differences
being:
- Register fields appearing, disappearing from one platform to the
  next: panel-reset-on-powerdown, backlight-on, panel-port,
  register-unlock
- Different register base addresses
- Different number of PPS instances: 2 on VLV/CHV/BXT, 1 everywhere
  else.

We can merge the separate set of PPS definitions by extending the PPS
instance argument to all platforms and using instance 0 on platforms
with a single instance. This means we'll need to calculate the register
addresses dynamically based on the given platform and PPS instance.

v2:
- Simplify if ladder in intel_pps_get_registers(). (Ville)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470827254-21954-1-git-send-email-imre.deak@intel.com

drivers/gpu/drm/i915/i915_drv.h

@@ -1749,6 +1749,8 @@ struct drm_i915_private {
 
 	uint32_t psr_mmio_base;
 
+	uint32_t pps_mmio_base;
+
 	wait_queue_head_t gmbus_wait_queue;
 
 	struct pci_dev *bridge_dev;

drivers/gpu/drm/i915/i915_reg.h

@@ -3660,8 +3660,17 @@ enum {
 #define   VIDEO_DIP_ENABLE_SPD_HSW	(1 << 0)
 
 /* Panel power sequencing */
-#define PP_STATUS	_MMIO(0x61200)
-#define   PP_ON		(1 << 31)
+#define PPS_BASE			0x61200
+#define VLV_PPS_BASE			(VLV_DISPLAY_BASE + PPS_BASE)
+#define PCH_PPS_BASE			0xC7200
+
+#define _MMIO_PPS(pps_idx, reg)		_MMIO(dev_priv->pps_mmio_base -	\
+					      PPS_BASE + (reg) +	\
+					      (pps_idx) * 0x100)
+
+#define _PP_STATUS			0x61200
+#define PP_STATUS(pps_idx)		_MMIO_PPS(pps_idx, _PP_STATUS)
+#define   PP_ON				(1 << 31)
 /*
  * Indicates that all dependencies of the panel are on:
  *
@@ -3669,14 +3678,14 @@ enum {
  * - pipe enabled
  * - LVDS/DVOB/DVOC on
  */
-#define   PP_READY		(1 << 30)
-#define   PP_SEQUENCE_NONE	(0 << 28)
-#define   PP_SEQUENCE_POWER_UP	(1 << 28)
-#define   PP_SEQUENCE_POWER_DOWN (2 << 28)
-#define   PP_SEQUENCE_MASK	(3 << 28)
-#define   PP_SEQUENCE_SHIFT	28
-#define   PP_CYCLE_DELAY_ACTIVE	(1 << 27)
-#define   PP_SEQUENCE_STATE_MASK 0x0000000f
+#define   PP_READY			(1 << 30)
+#define   PP_SEQUENCE_NONE		(0 << 28)
+#define   PP_SEQUENCE_POWER_UP		(1 << 28)
+#define   PP_SEQUENCE_POWER_DOWN	(2 << 28)
+#define   PP_SEQUENCE_MASK		(3 << 28)
+#define   PP_SEQUENCE_SHIFT		28
+#define   PP_CYCLE_DELAY_ACTIVE		(1 << 27)
+#define   PP_SEQUENCE_STATE_MASK	0x0000000f
 #define   PP_SEQUENCE_STATE_OFF_IDLE	(0x0 << 0)
 #define   PP_SEQUENCE_STATE_OFF_S0_1	(0x1 << 0)
 #define   PP_SEQUENCE_STATE_OFF_S0_2	(0x2 << 0)
@@ -3686,11 +3695,46 @@ enum {
 #define   PP_SEQUENCE_STATE_ON_S1_2	(0xa << 0)
 #define   PP_SEQUENCE_STATE_ON_S1_3	(0xb << 0)
 #define   PP_SEQUENCE_STATE_RESET	(0xf << 0)
-#define PP_CONTROL	_MMIO(0x61204)
-#define   POWER_TARGET_ON	(1 << 0)
-#define PP_ON_DELAYS	_MMIO(0x61208)
-#define PP_OFF_DELAYS	_MMIO(0x6120c)
-#define PP_DIVISOR	_MMIO(0x61210)
+
+#define _PP_CONTROL			0x61204
+#define PP_CONTROL(pps_idx)		_MMIO_PPS(pps_idx, _PP_CONTROL)
+#define  PANEL_UNLOCK_REGS		(0xabcd << 16)
+#define  PANEL_UNLOCK_MASK		(0xffff << 16)
+#define  BXT_POWER_CYCLE_DELAY_MASK	0x1f0
+#define  BXT_POWER_CYCLE_DELAY_SHIFT	4
+#define  EDP_FORCE_VDD			(1 << 3)
+#define  EDP_BLC_ENABLE			(1 << 2)
+#define  PANEL_POWER_RESET		(1 << 1)
+#define  PANEL_POWER_OFF		(0 << 0)
+#define  PANEL_POWER_ON			(1 << 0)
+#define  POWER_TARGET_ON		(1 << 0)
+
+#define _PP_ON_DELAYS			0x61208
+#define PP_ON_DELAYS(pps_idx)		_MMIO_PPS(pps_idx, _PP_ON_DELAYS)
+#define  PANEL_PORT_SELECT_MASK		(3 << 30)
+#define  PANEL_PORT_SELECT_LVDS		(0 << 30)
+#define  PANEL_PORT_SELECT_DPA		(1 << 30)
+#define  PANEL_PORT_SELECT_DPC		(2 << 30)
+#define  PANEL_PORT_SELECT_DPD		(3 << 30)
+#define  PANEL_PORT_SELECT_VLV(port)	((port) << 30)
+#define  PANEL_POWER_UP_DELAY_MASK	0x1fff0000
+#define  PANEL_POWER_UP_DELAY_SHIFT	16
+#define  PANEL_LIGHT_ON_DELAY_MASK	0x1fff
+#define  PANEL_LIGHT_ON_DELAY_SHIFT	0
+
+#define _PP_OFF_DELAYS			0x6120C
+#define PP_OFF_DELAYS(pps_idx)		_MMIO_PPS(pps_idx, _PP_OFF_DELAYS)
+#define  PANEL_POWER_DOWN_DELAY_MASK	0x1fff0000
+#define  PANEL_POWER_DOWN_DELAY_SHIFT	16
+#define  PANEL_LIGHT_OFF_DELAY_MASK	0x1fff
+#define  PANEL_LIGHT_OFF_DELAY_SHIFT	0
+
+#define _PP_DIVISOR			0x61210
+#define PP_DIVISOR(pps_idx)		_MMIO_PPS(pps_idx, _PP_DIVISOR)
+#define  PP_REFERENCE_DIVIDER_MASK	0xffffff00
+#define  PP_REFERENCE_DIVIDER_SHIFT	8
+#define  PANEL_POWER_CYCLE_DELAY_MASK	0x1f
+#define  PANEL_POWER_CYCLE_DELAY_SHIFT	0
 
 /* Panel fitting */
 #define PFIT_CONTROL	_MMIO(dev_priv->info.display_mmio_offset + 0x61230)
@@ -6750,77 +6794,6 @@ enum {
 #define PCH_LVDS	_MMIO(0xe1180)
 #define  LVDS_DETECTED	(1 << 1)
 
-/* vlv has 2 sets of panel control regs. */
-#define _PIPEA_PP_STATUS         (VLV_DISPLAY_BASE + 0x61200)
-#define _PIPEA_PP_CONTROL        (VLV_DISPLAY_BASE + 0x61204)
-#define _PIPEA_PP_ON_DELAYS      (VLV_DISPLAY_BASE + 0x61208)
-#define  PANEL_PORT_SELECT_VLV(port)	((port) << 30)
-#define _PIPEA_PP_OFF_DELAYS     (VLV_DISPLAY_BASE + 0x6120c)
-#define _PIPEA_PP_DIVISOR        (VLV_DISPLAY_BASE + 0x61210)
-
-#define _PIPEB_PP_STATUS         (VLV_DISPLAY_BASE + 0x61300)
-#define _PIPEB_PP_CONTROL        (VLV_DISPLAY_BASE + 0x61304)
-#define _PIPEB_PP_ON_DELAYS      (VLV_DISPLAY_BASE + 0x61308)
-#define _PIPEB_PP_OFF_DELAYS     (VLV_DISPLAY_BASE + 0x6130c)
-#define _PIPEB_PP_DIVISOR        (VLV_DISPLAY_BASE + 0x61310)
-
-#define VLV_PIPE_PP_STATUS(pipe)	_MMIO_PIPE(pipe, _PIPEA_PP_STATUS, _PIPEB_PP_STATUS)
-#define VLV_PIPE_PP_CONTROL(pipe)	_MMIO_PIPE(pipe, _PIPEA_PP_CONTROL, _PIPEB_PP_CONTROL)
-#define VLV_PIPE_PP_ON_DELAYS(pipe)	_MMIO_PIPE(pipe, _PIPEA_PP_ON_DELAYS, _PIPEB_PP_ON_DELAYS)
-#define VLV_PIPE_PP_OFF_DELAYS(pipe)	_MMIO_PIPE(pipe, _PIPEA_PP_OFF_DELAYS, _PIPEB_PP_OFF_DELAYS)
-#define VLV_PIPE_PP_DIVISOR(pipe)	_MMIO_PIPE(pipe, _PIPEA_PP_DIVISOR, _PIPEB_PP_DIVISOR)
-
-#define _PCH_PP_STATUS		0xc7200
-#define _PCH_PP_CONTROL		0xc7204
-#define  PANEL_UNLOCK_REGS	(0xabcd << 16)
-#define  PANEL_UNLOCK_MASK	(0xffff << 16)
-#define  BXT_POWER_CYCLE_DELAY_MASK	(0x1f0)
-#define  BXT_POWER_CYCLE_DELAY_SHIFT	4
-#define  EDP_FORCE_VDD		(1 << 3)
-#define  EDP_BLC_ENABLE		(1 << 2)
-#define  PANEL_POWER_RESET	(1 << 1)
-#define  PANEL_POWER_OFF	(0 << 0)
-#define  PANEL_POWER_ON		(1 << 0)
-#define _PCH_PP_ON_DELAYS	0xc7208
-#define  PANEL_PORT_SELECT_MASK	(3 << 30)
-#define  PANEL_PORT_SELECT_LVDS	(0 << 30)
-#define  PANEL_PORT_SELECT_DPA	(1 << 30)
-#define  PANEL_PORT_SELECT_DPC	(2 << 30)
-#define  PANEL_PORT_SELECT_DPD	(3 << 30)
-#define  PANEL_POWER_UP_DELAY_MASK	(0x1fff0000)
-#define  PANEL_POWER_UP_DELAY_SHIFT	16
-#define  PANEL_LIGHT_ON_DELAY_MASK	(0x1fff)
-#define  PANEL_LIGHT_ON_DELAY_SHIFT	0
-
-#define _PCH_PP_OFF_DELAYS		0xc720c
-#define  PANEL_POWER_DOWN_DELAY_MASK	(0x1fff0000)
-#define  PANEL_POWER_DOWN_DELAY_SHIFT	16
-#define  PANEL_LIGHT_OFF_DELAY_MASK	(0x1fff)
-#define  PANEL_LIGHT_OFF_DELAY_SHIFT	0
-
-#define _PCH_PP_DIVISOR			0xc7210
-#define  PP_REFERENCE_DIVIDER_MASK	(0xffffff00)
-#define  PP_REFERENCE_DIVIDER_SHIFT	8
-#define  PANEL_POWER_CYCLE_DELAY_MASK	(0x1f)
-#define  PANEL_POWER_CYCLE_DELAY_SHIFT	0
-
-#define PCH_PP_STATUS			_MMIO(_PCH_PP_STATUS)
-#define PCH_PP_CONTROL			_MMIO(_PCH_PP_CONTROL)
-#define PCH_PP_ON_DELAYS		_MMIO(_PCH_PP_ON_DELAYS)
-#define PCH_PP_OFF_DELAYS		_MMIO(_PCH_PP_OFF_DELAYS)
-#define PCH_PP_DIVISOR			_MMIO(_PCH_PP_DIVISOR)
-
-/* BXT PPS changes - 2nd set of PPS registers */
-#define _BXT_PP_STATUS2 	0xc7300
-#define _BXT_PP_CONTROL2 	0xc7304
-#define _BXT_PP_ON_DELAYS2	0xc7308
-#define _BXT_PP_OFF_DELAYS2	0xc730c
-
-#define BXT_PP_STATUS(n)	_MMIO_PIPE(n, _PCH_PP_STATUS, _BXT_PP_STATUS2)
-#define BXT_PP_CONTROL(n)	_MMIO_PIPE(n, _PCH_PP_CONTROL, _BXT_PP_CONTROL2)
-#define BXT_PP_ON_DELAYS(n)	_MMIO_PIPE(n, _PCH_PP_ON_DELAYS, _BXT_PP_ON_DELAYS2)
-#define BXT_PP_OFF_DELAYS(n)	_MMIO_PIPE(n, _PCH_PP_OFF_DELAYS, _BXT_PP_OFF_DELAYS2)
-
 #define _PCH_DP_B		0xe4100
 #define PCH_DP_B		_MMIO(_PCH_DP_B)
 #define _PCH_DPB_AUX_CH_CTL	0xe4110

drivers/gpu/drm/i915/i915_suspend.c

@@ -44,16 +44,11 @@ static void i915_save_display(struct drm_device *dev)
 		dev_priv->regfile.saveLVDS = I915_READ(LVDS);
 
 	/* Panel power sequencer */
-	if (HAS_PCH_SPLIT(dev)) {
-		dev_priv->regfile.savePP_CONTROL = I915_READ(PCH_PP_CONTROL);
-		dev_priv->regfile.savePP_ON_DELAYS = I915_READ(PCH_PP_ON_DELAYS);
-		dev_priv->regfile.savePP_OFF_DELAYS = I915_READ(PCH_PP_OFF_DELAYS);
-		dev_priv->regfile.savePP_DIVISOR = I915_READ(PCH_PP_DIVISOR);
-	} else if (INTEL_INFO(dev)->gen <= 4) {
-		dev_priv->regfile.savePP_CONTROL = I915_READ(PP_CONTROL);
-		dev_priv->regfile.savePP_ON_DELAYS = I915_READ(PP_ON_DELAYS);
-		dev_priv->regfile.savePP_OFF_DELAYS = I915_READ(PP_OFF_DELAYS);
-		dev_priv->regfile.savePP_DIVISOR = I915_READ(PP_DIVISOR);
+	if (HAS_PCH_SPLIT(dev_priv) || INTEL_GEN(dev_priv) <= 4) {
+		dev_priv->regfile.savePP_CONTROL = I915_READ(PP_CONTROL(0));
+		dev_priv->regfile.savePP_ON_DELAYS = I915_READ(PP_ON_DELAYS(0));
+		dev_priv->regfile.savePP_OFF_DELAYS = I915_READ(PP_OFF_DELAYS(0));
+		dev_priv->regfile.savePP_DIVISOR = I915_READ(PP_DIVISOR(0));
 	}
 
 	/* save FBC interval */
@@ -79,16 +74,11 @@ static void i915_restore_display(struct drm_device *dev)
 		I915_WRITE(LVDS, dev_priv->regfile.saveLVDS & mask);
 
 	/* Panel power sequencer */
-	if (HAS_PCH_SPLIT(dev)) {
-		I915_WRITE(PCH_PP_ON_DELAYS, dev_priv->regfile.savePP_ON_DELAYS);
-		I915_WRITE(PCH_PP_OFF_DELAYS, dev_priv->regfile.savePP_OFF_DELAYS);
-		I915_WRITE(PCH_PP_DIVISOR, dev_priv->regfile.savePP_DIVISOR);
-		I915_WRITE(PCH_PP_CONTROL, dev_priv->regfile.savePP_CONTROL);
-	} else if (INTEL_INFO(dev)->gen <= 4) {
-		I915_WRITE(PP_ON_DELAYS, dev_priv->regfile.savePP_ON_DELAYS);
-		I915_WRITE(PP_OFF_DELAYS, dev_priv->regfile.savePP_OFF_DELAYS);
-		I915_WRITE(PP_DIVISOR, dev_priv->regfile.savePP_DIVISOR);
-		I915_WRITE(PP_CONTROL, dev_priv->regfile.savePP_CONTROL);
+	if (HAS_PCH_SPLIT(dev_priv) || INTEL_GEN(dev_priv) <= 4) {
+		I915_WRITE(PP_ON_DELAYS(0), dev_priv->regfile.savePP_ON_DELAYS);
+		I915_WRITE(PP_OFF_DELAYS(0), dev_priv->regfile.savePP_OFF_DELAYS);
+		I915_WRITE(PP_DIVISOR(0), dev_priv->regfile.savePP_DIVISOR);
+		I915_WRITE(PP_CONTROL(0), dev_priv->regfile.savePP_CONTROL);
 	}
 
 	/* only restore FBC info on the platform that supports FBC*/

drivers/gpu/drm/i915/intel_display.c

@@ -1202,8 +1202,8 @@ void assert_panel_unlocked(struct drm_i915_private *dev_priv,
 	if (HAS_PCH_SPLIT(dev)) {
 		u32 port_sel;
 
-		pp_reg = PCH_PP_CONTROL;
-		port_sel = I915_READ(PCH_PP_ON_DELAYS) & PANEL_PORT_SELECT_MASK;
+		pp_reg = PP_CONTROL(0);
+		port_sel = I915_READ(PP_ON_DELAYS(0)) & PANEL_PORT_SELECT_MASK;
 
 		if (port_sel == PANEL_PORT_SELECT_LVDS &&
 		    I915_READ(PCH_LVDS) & LVDS_PIPEB_SELECT)
@@ -1211,10 +1211,10 @@ void assert_panel_unlocked(struct drm_i915_private *dev_priv,
 		/* XXX: else fix for eDP */
 	} else if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) {
 		/* presumably write lock depends on pipe, not port select */
-		pp_reg = VLV_PIPE_PP_CONTROL(pipe);
+		pp_reg = PP_CONTROL(pipe);
 		panel_pipe = pipe;
 	} else {
-		pp_reg = PP_CONTROL;
+		pp_reg = PP_CONTROL(0);
 		if (I915_READ(LVDS) & LVDS_PIPEB_SELECT)
 			panel_pipe = PIPE_B;
 	}
@@ -9491,7 +9491,7 @@ static void assert_can_disable_lcpll(struct drm_i915_private *dev_priv)
 	I915_STATE_WARN(I915_READ(SPLL_CTL) & SPLL_PLL_ENABLE, "SPLL enabled\n");
 	I915_STATE_WARN(I915_READ(WRPLL_CTL(0)) & WRPLL_PLL_ENABLE, "WRPLL1 enabled\n");
 	I915_STATE_WARN(I915_READ(WRPLL_CTL(1)) & WRPLL_PLL_ENABLE, "WRPLL2 enabled\n");
-	I915_STATE_WARN(I915_READ(PCH_PP_STATUS) & PP_ON, "Panel power on\n");
+	I915_STATE_WARN(I915_READ(PP_STATUS(0)) & PP_ON, "Panel power on\n");
 	I915_STATE_WARN(I915_READ(BLC_PWM_CPU_CTL2) & BLM_PWM_ENABLE,
 	     "CPU PWM1 enabled\n");
 	if (IS_HASWELL(dev))
@@ -14729,12 +14729,24 @@ static bool intel_crt_present(struct drm_device *dev)
 	return true;
 }
 
+static void intel_pps_init(struct drm_i915_private *dev_priv)
+{
+	if (HAS_PCH_SPLIT(dev_priv) || IS_BROXTON(dev_priv))
+		dev_priv->pps_mmio_base = PCH_PPS_BASE;
+	else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
+		dev_priv->pps_mmio_base = VLV_PPS_BASE;
+	else
+		dev_priv->pps_mmio_base = PPS_BASE;
+}
+
 static void intel_setup_outputs(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = to_i915(dev);
 	struct intel_encoder *encoder;
 	bool dpd_is_edp = false;
 
+	intel_pps_init(dev_priv);
+
 	/*
 	 * intel_edp_init_connector() depends on this completing first, to
 	 * prevent the registeration of both eDP and LVDS and the incorrect

drivers/gpu/drm/i915/intel_dp.c

@@ -463,13 +463,13 @@ typedef bool (*vlv_pipe_check)(struct drm_i915_private *dev_priv,
 static bool vlv_pipe_has_pp_on(struct drm_i915_private *dev_priv,
 			       enum pipe pipe)
 {
-	return I915_READ(VLV_PIPE_PP_STATUS(pipe)) & PP_ON;
+	return I915_READ(PP_STATUS(pipe)) & PP_ON;
 }
 
 static bool vlv_pipe_has_vdd_on(struct drm_i915_private *dev_priv,
 				enum pipe pipe)
 {
-	return I915_READ(VLV_PIPE_PP_CONTROL(pipe)) & EDP_FORCE_VDD;
+	return I915_READ(PP_CONTROL(pipe)) & EDP_FORCE_VDD;
 }
 
 static bool vlv_pipe_any(struct drm_i915_private *dev_priv,
@@ -486,7 +486,7 @@ vlv_initial_pps_pipe(struct drm_i915_private *dev_priv,
 	enum pipe pipe;
 
 	for (pipe = PIPE_A; pipe <= PIPE_B; pipe++) {
-		u32 port_sel = I915_READ(VLV_PIPE_PP_ON_DELAYS(pipe)) &
+		u32 port_sel = I915_READ(PP_ON_DELAYS(pipe)) &
 			PANEL_PORT_SELECT_MASK;
 
 		if (port_sel != PANEL_PORT_SELECT_VLV(port))
@@ -583,30 +583,21 @@ static void intel_pps_get_registers(struct drm_i915_private *dev_priv,
 				    struct intel_dp *intel_dp,
 				    struct pps_registers *regs)
 {
+	int pps_idx = 0;
+
 	memset(regs, 0, sizeof(*regs));
 
-	if (IS_BROXTON(dev_priv)) {
-		int idx = bxt_power_sequencer_idx(intel_dp);
-
-		regs->pp_ctrl = BXT_PP_CONTROL(idx);
-		regs->pp_stat = BXT_PP_STATUS(idx);
-		regs->pp_on = BXT_PP_ON_DELAYS(idx);
-		regs->pp_off = BXT_PP_OFF_DELAYS(idx);
-	} else if (HAS_PCH_SPLIT(dev_priv)) {
-		regs->pp_ctrl = PCH_PP_CONTROL;
-		regs->pp_stat = PCH_PP_STATUS;
-		regs->pp_on = PCH_PP_ON_DELAYS;
-		regs->pp_off = PCH_PP_OFF_DELAYS;
-		regs->pp_div = PCH_PP_DIVISOR;
-	} else {
-		enum pipe pipe = vlv_power_sequencer_pipe(intel_dp);
+	if (IS_BROXTON(dev_priv))
+		pps_idx = bxt_power_sequencer_idx(intel_dp);
+	else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
+		pps_idx = vlv_power_sequencer_pipe(intel_dp);
 
-		regs->pp_ctrl = VLV_PIPE_PP_CONTROL(pipe);
-		regs->pp_stat = VLV_PIPE_PP_STATUS(pipe);
-		regs->pp_on = VLV_PIPE_PP_ON_DELAYS(pipe);
-		regs->pp_off = VLV_PIPE_PP_OFF_DELAYS(pipe);
-		regs->pp_div = VLV_PIPE_PP_DIVISOR(pipe);
-	}
+	regs->pp_ctrl = PP_CONTROL(pps_idx);
+	regs->pp_stat = PP_STATUS(pps_idx);
+	regs->pp_on = PP_ON_DELAYS(pps_idx);
+	regs->pp_off = PP_OFF_DELAYS(pps_idx);
+	if (!IS_BROXTON(dev_priv))
+		regs->pp_div = PP_DIVISOR(pps_idx);
 }
 
 static i915_reg_t
@@ -651,8 +642,8 @@ static int edp_notify_handler(struct notifier_block *this, unsigned long code,
 		i915_reg_t pp_ctrl_reg, pp_div_reg;
 		u32 pp_div;
 
-		pp_ctrl_reg = VLV_PIPE_PP_CONTROL(pipe);
-		pp_div_reg  = VLV_PIPE_PP_DIVISOR(pipe);
+		pp_ctrl_reg = PP_CONTROL(pipe);
+		pp_div_reg  = PP_DIVISOR(pipe);
 		pp_div = I915_READ(pp_div_reg);
 		pp_div &= PP_REFERENCE_DIVIDER_MASK;
 
@@ -2729,7 +2720,7 @@ static void vlv_detach_power_sequencer(struct intel_dp *intel_dp)
 	struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
 	struct drm_i915_private *dev_priv = to_i915(intel_dig_port->base.base.dev);
 	enum pipe pipe = intel_dp->pps_pipe;
-	i915_reg_t pp_on_reg = VLV_PIPE_PP_ON_DELAYS(pipe);
+	i915_reg_t pp_on_reg = PP_ON_DELAYS(pipe);
 
 	edp_panel_vdd_off_sync(intel_dp);
 

drivers/gpu/drm/i915/intel_lvds.c

@@ -217,21 +217,12 @@ static void intel_enable_lvds(struct intel_encoder *encoder)
 	struct intel_connector *intel_connector =
 		&lvds_encoder->attached_connector->base;
 	struct drm_i915_private *dev_priv = to_i915(dev);
-	i915_reg_t ctl_reg, stat_reg;
-
-	if (HAS_PCH_SPLIT(dev)) {
-		ctl_reg = PCH_PP_CONTROL;
-		stat_reg = PCH_PP_STATUS;
-	} else {
-		ctl_reg = PP_CONTROL;
-		stat_reg = PP_STATUS;
-	}
 
 	I915_WRITE(lvds_encoder->reg, I915_READ(lvds_encoder->reg) | LVDS_PORT_EN);
 
-	I915_WRITE(ctl_reg, I915_READ(ctl_reg) | POWER_TARGET_ON);
+	I915_WRITE(PP_CONTROL(0), I915_READ(PP_CONTROL(0)) | POWER_TARGET_ON);
 	POSTING_READ(lvds_encoder->reg);
-	if (intel_wait_for_register(dev_priv, stat_reg, PP_ON, PP_ON, 1000))
+	if (intel_wait_for_register(dev_priv, PP_STATUS(0), PP_ON, PP_ON, 1000))
 		DRM_ERROR("timed out waiting for panel to power on\n");
 
 	intel_panel_enable_backlight(intel_connector);
@@ -242,18 +233,9 @@ static void intel_disable_lvds(struct intel_encoder *encoder)
 	struct drm_device *dev = encoder->base.dev;
 	struct intel_lvds_encoder *lvds_encoder = to_lvds_encoder(&encoder->base);
 	struct drm_i915_private *dev_priv = to_i915(dev);
-	i915_reg_t ctl_reg, stat_reg;
 
-	if (HAS_PCH_SPLIT(dev)) {
-		ctl_reg = PCH_PP_CONTROL;
-		stat_reg = PCH_PP_STATUS;
-	} else {
-		ctl_reg = PP_CONTROL;
-		stat_reg = PP_STATUS;
-	}
-
-	I915_WRITE(ctl_reg, I915_READ(ctl_reg) & ~POWER_TARGET_ON);
-	if (intel_wait_for_register(dev_priv, stat_reg, PP_ON, 0, 1000))
+	I915_WRITE(PP_CONTROL(0), I915_READ(PP_CONTROL(0)) & ~POWER_TARGET_ON);
+	if (intel_wait_for_register(dev_priv, PP_STATUS(0), PP_ON, 0, 1000))
 		DRM_ERROR("timed out waiting for panel to power off\n");
 
 	I915_WRITE(lvds_encoder->reg, I915_READ(lvds_encoder->reg) & ~LVDS_PORT_EN);
@@ -904,13 +886,10 @@ void intel_lvds_init(struct drm_device *dev)
 	 * Unlock registers and just leave them unlocked. Do this before
 	 * checking quirk lists to avoid bogus WARNINGs.
 	 */
-	if (HAS_PCH_SPLIT(dev)) {
-		I915_WRITE(PCH_PP_CONTROL,
-			   I915_READ(PCH_PP_CONTROL) | PANEL_UNLOCK_REGS);
-	} else if (INTEL_INFO(dev_priv)->gen < 5) {
-		I915_WRITE(PP_CONTROL,
-			   I915_READ(PP_CONTROL) | PANEL_UNLOCK_REGS);
-	}
+	if (HAS_PCH_SPLIT(dev_priv) || INTEL_GEN(dev_priv) <= 4)
+		I915_WRITE(PP_CONTROL(0),
+			   I915_READ(PP_CONTROL(0)) | PANEL_UNLOCK_REGS);
+
 	if (!intel_lvds_supported(dev))
 		return;
 
@@ -945,12 +924,12 @@ void intel_lvds_init(struct drm_device *dev)
 
 	 /* Set the Panel Power On/Off timings if uninitialized. */
 	if (INTEL_INFO(dev_priv)->gen < 5 &&
-	    I915_READ(PP_ON_DELAYS) == 0 && I915_READ(PP_OFF_DELAYS) == 0) {
+	    I915_READ(PP_ON_DELAYS(0)) == 0 && I915_READ(PP_OFF_DELAYS(0)) == 0) {
 		/* Set T2 to 40ms and T5 to 200ms */
-		I915_WRITE(PP_ON_DELAYS, 0x019007d0);
+		I915_WRITE(PP_ON_DELAYS(0), 0x019007d0);
 
 		/* Set T3 to 35ms and Tx to 200ms */
-		I915_WRITE(PP_OFF_DELAYS, 0x015e07d0);
+		I915_WRITE(PP_OFF_DELAYS(0), 0x015e07d0);
 
 		DRM_DEBUG_KMS("Panel power timings uninitialized, setting defaults\n");
 	}