Commit 45196cee authored by Linus Torvalds's avatar Linus Torvalds

Merge tag 'usb-3.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

USB bugfixes for 3.3-rc4

A number of new device ids, and a cleanup/fix for some of the option
device ids that shouldn't have been added in the first place.

There's also a few USB 3 fixes for problems that people have reported,
and a usb-storage bugfix to round it out.
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>

* tag 'usb-3.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: Added Kamstrup VID/PIDs to cp210x serial driver.
  USB: Serial: ti_usb_3410_5052: Add Abbot Diabetes Care cable id
  usb-storage: fix freezing of the scanning thread
  xhci: Fix encoding for HS bulk/control NAK rate.
  USB: Set hub depth after USB3 hub reset
  USB: Fix handoff when BIOS disables host PCI device.
  USB: option: cleanup zte 3g-dongle's pid in option.c
  USB: Don't fail USB3 probe on missing legacy PCI IRQ.
  xhci: Fix oops caused by more USB2 ports than USB3 ports.
  USB: Remove duplicate USB 3.0 hub feature #defines.
parents e2d4370b c6c1e449
......@@ -187,7 +187,10 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
return -ENODEV;
dev->current_state = PCI_D0;
if (!dev->irq) {
/* The xHCI driver supports MSI and MSI-X,
* so don't fail if the BIOS doesn't provide a legacy IRQ.
*/
if (!dev->irq && (driver->flags & HCD_MASK) != HCD_USB3) {
dev_err(&dev->dev,
"Found HC with no IRQ. Check BIOS/PCI %s setup!\n",
pci_name(dev));
......
......@@ -2447,8 +2447,10 @@ int usb_add_hcd(struct usb_hcd *hcd,
&& device_can_wakeup(&hcd->self.root_hub->dev))
dev_dbg(hcd->self.controller, "supports USB remote wakeup\n");
/* enable irqs just before we start the controller */
if (usb_hcd_is_primary_hcd(hcd)) {
/* enable irqs just before we start the controller,
* if the BIOS provides legacy PCI irqs.
*/
if (usb_hcd_is_primary_hcd(hcd) && irqnum) {
retval = usb_hcd_request_irqs(hcd, irqnum, irqflags);
if (retval)
goto err_request_irq;
......
......@@ -705,10 +705,26 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
if (type == HUB_INIT3)
goto init3;
/* After a resume, port power should still be on.
/* The superspeed hub except for root hub has to use Hub Depth
* value as an offset into the route string to locate the bits
* it uses to determine the downstream port number. So hub driver
* should send a set hub depth request to superspeed hub after
* the superspeed hub is set configuration in initialization or
* reset procedure.
*
* After a resume, port power should still be on.
* For any other type of activation, turn it on.
*/
if (type != HUB_RESUME) {
if (hdev->parent && hub_is_superspeed(hdev)) {
ret = usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
HUB_SET_DEPTH, USB_RT_HUB,
hdev->level - 1, 0, NULL, 0,
USB_CTRL_SET_TIMEOUT);
if (ret < 0)
dev_err(hub->intfdev,
"set hub depth failed\n");
}
/* Speed up system boot by using a delayed_work for the
* hub's initial power-up delays. This is pretty awkward
......@@ -987,18 +1003,6 @@ static int hub_configure(struct usb_hub *hub,
goto fail;
}
if (hub_is_superspeed(hdev) && (hdev->parent != NULL)) {
ret = usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
HUB_SET_DEPTH, USB_RT_HUB,
hdev->level - 1, 0, NULL, 0,
USB_CTRL_SET_TIMEOUT);
if (ret < 0) {
message = "can't set hub depth";
goto fail;
}
}
/* Request the entire hub descriptor.
* hub->descriptor can handle USB_MAXCHILDREN ports,
* but the hub can/will return fewer bytes here.
......
......@@ -872,7 +872,17 @@ static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev)
*/
if (pdev->vendor == 0x184e) /* vendor Netlogic */
return;
if (pdev->class != PCI_CLASS_SERIAL_USB_UHCI &&
pdev->class != PCI_CLASS_SERIAL_USB_OHCI &&
pdev->class != PCI_CLASS_SERIAL_USB_EHCI &&
pdev->class != PCI_CLASS_SERIAL_USB_XHCI)
return;
if (pci_enable_device(pdev) < 0) {
dev_warn(&pdev->dev, "Can't enable PCI device, "
"BIOS handoff failed.\n");
return;
}
if (pdev->class == PCI_CLASS_SERIAL_USB_UHCI)
quirk_usb_handoff_uhci(pdev);
else if (pdev->class == PCI_CLASS_SERIAL_USB_OHCI)
......@@ -881,5 +891,6 @@ static void __devinit quirk_usb_early_handoff(struct pci_dev *pdev)
quirk_usb_disable_ehci(pdev);
else if (pdev->class == PCI_CLASS_SERIAL_USB_XHCI)
quirk_usb_handoff_xhci(pdev);
pci_disable_device(pdev);
}
DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff);
......@@ -93,7 +93,7 @@ static void xhci_usb2_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci,
*/
memset(port_removable, 0, sizeof(port_removable));
for (i = 0; i < ports; i++) {
portsc = xhci_readl(xhci, xhci->usb3_ports[i]);
portsc = xhci_readl(xhci, xhci->usb2_ports[i]);
/* If a device is removable, PORTSC reports a 0, same as in the
* hub descriptor DeviceRemovable bits.
*/
......
......@@ -1126,26 +1126,42 @@ static unsigned int xhci_parse_exponent_interval(struct usb_device *udev,
}
/*
* Convert bInterval expressed in frames (in 1-255 range) to exponent of
* Convert bInterval expressed in microframes (in 1-255 range) to exponent of
* microframes, rounded down to nearest power of 2.
*/
static unsigned int xhci_parse_frame_interval(struct usb_device *udev,
struct usb_host_endpoint *ep)
static unsigned int xhci_microframes_to_exponent(struct usb_device *udev,
struct usb_host_endpoint *ep, unsigned int desc_interval,
unsigned int min_exponent, unsigned int max_exponent)
{
unsigned int interval;
interval = fls(8 * ep->desc.bInterval) - 1;
interval = clamp_val(interval, 3, 10);
if ((1 << interval) != 8 * ep->desc.bInterval)
interval = fls(desc_interval) - 1;
interval = clamp_val(interval, min_exponent, max_exponent);
if ((1 << interval) != desc_interval)
dev_warn(&udev->dev,
"ep %#x - rounding interval to %d microframes, ep desc says %d microframes\n",
ep->desc.bEndpointAddress,
1 << interval,
8 * ep->desc.bInterval);
desc_interval);
return interval;
}
static unsigned int xhci_parse_microframe_interval(struct usb_device *udev,
struct usb_host_endpoint *ep)
{
return xhci_microframes_to_exponent(udev, ep,
ep->desc.bInterval, 0, 15);
}
static unsigned int xhci_parse_frame_interval(struct usb_device *udev,
struct usb_host_endpoint *ep)
{
return xhci_microframes_to_exponent(udev, ep,
ep->desc.bInterval * 8, 3, 10);
}
/* Return the polling or NAK interval.
*
* The polling interval is expressed in "microframes". If xHCI's Interval field
......@@ -1164,7 +1180,7 @@ static unsigned int xhci_get_endpoint_interval(struct usb_device *udev,
/* Max NAK rate */
if (usb_endpoint_xfer_control(&ep->desc) ||
usb_endpoint_xfer_bulk(&ep->desc)) {
interval = ep->desc.bInterval;
interval = xhci_parse_microframe_interval(udev, ep);
break;
}
/* Fall through - SS and HS isoc/int have same decoding */
......
......@@ -352,6 +352,11 @@ static int xhci_try_enable_msi(struct usb_hcd *hcd)
/* hcd->irq is -1, we have MSI */
return 0;
if (!pdev->irq) {
xhci_err(xhci, "No msi-x/msi found and no IRQ in BIOS\n");
return -EINVAL;
}
/* fall back to legacy interrupt*/
ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED,
hcd->irq_descr, hcd);
......
......@@ -136,6 +136,8 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x16DC, 0x0011) }, /* W-IE-NE-R Plein & Baus GmbH RCM Remote Control for MARATON Power Supply */
{ USB_DEVICE(0x16DC, 0x0012) }, /* W-IE-NE-R Plein & Baus GmbH MPOD Multi Channel Power Supply */
{ USB_DEVICE(0x16DC, 0x0015) }, /* W-IE-NE-R Plein & Baus GmbH CML Control, Monitoring and Data Logger */
{ USB_DEVICE(0x17A8, 0x0001) }, /* Kamstrup Optical Eye/3-wire */
{ USB_DEVICE(0x17A8, 0x0005) }, /* Kamstrup M-Bus Master MultiPort 250D */
{ USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */
{ USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
......
......@@ -788,7 +788,6 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0012, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0013, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0014, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0016, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0017, 0xff, 0xff, 0xff),
......@@ -803,7 +802,6 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0024, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0025, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
/* { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0026, 0xff, 0xff, 0xff) }, */
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0028, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0029, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0030, 0xff, 0xff, 0xff) },
......@@ -828,7 +826,6 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0051, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0052, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
/* { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0053, 0xff, 0xff, 0xff) }, */
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0054, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0055, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf1_blacklist },
......@@ -836,7 +833,6 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0057, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0058, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0059, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0061, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0062, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0063, 0xff, 0xff, 0xff),
......@@ -846,7 +842,6 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0066, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0067, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0069, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0070, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0076, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0077, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0078, 0xff, 0xff, 0xff) },
......@@ -865,8 +860,6 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0095, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0096, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0097, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0098, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0099, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0104, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0105, 0xff, 0xff, 0xff) },
......@@ -887,28 +880,18 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0143, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0144, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0145, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0146, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0147, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0148, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0149, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0150, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0151, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0152, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0153, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0155, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0156, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0157, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0158, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0159, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0160, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0161, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0162, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0164, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0165, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0168, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0170, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0176, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0178, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1008, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff) },
......@@ -1083,127 +1066,27 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1298, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1299, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1300, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1401, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1402, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1403, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1404, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1405, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1406, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1407, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1408, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1409, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1410, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1411, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1412, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1413, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1414, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1415, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1416, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1417, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1418, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1419, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1420, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1421, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1422, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1423, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1424, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1425, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1426, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1427, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1428, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1429, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1430, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1431, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1432, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1433, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1434, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1435, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1436, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1437, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1438, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1439, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1440, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1441, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1442, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1443, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1444, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1445, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1446, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1447, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1448, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1449, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1450, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1451, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1452, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1453, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1454, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1455, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1456, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1457, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1458, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1459, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1460, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1461, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1462, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1463, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1464, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1465, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1466, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1467, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1468, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1469, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1470, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1471, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1472, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1473, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1474, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1475, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1476, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1477, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1478, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1479, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1480, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1481, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1482, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1483, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1484, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1485, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1486, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1487, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1488, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1489, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1490, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1491, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1492, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1493, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1494, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1495, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1496, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1497, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1498, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1499, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1500, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1501, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1502, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1503, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1504, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1505, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1506, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1507, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1508, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1509, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1510, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff,
0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_k3765_z_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0014, 0xff, 0xff, 0xff) }, /* ZTE CDMA products */
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0027, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0059, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0060, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0070, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0073, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0094, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0130, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0133, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0141, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff,
0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_k3765_z_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0147, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0152, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0168, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0170, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0176, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0178, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) },
......
......@@ -165,7 +165,7 @@ static unsigned int product_5052_count;
/* the array dimension is the number of default entries plus */
/* TI_EXTRA_VID_PID_COUNT user defined entries plus 1 terminating */
/* null entry */
static struct usb_device_id ti_id_table_3410[13+TI_EXTRA_VID_PID_COUNT+1] = {
static struct usb_device_id ti_id_table_3410[14+TI_EXTRA_VID_PID_COUNT+1] = {
{ USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
{ USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) },
......@@ -179,6 +179,7 @@ static struct usb_device_id ti_id_table_3410[13+TI_EXTRA_VID_PID_COUNT+1] = {
{ USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
{ USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) },
{ USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) },
{ USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_PRODUCT_ID) },
};
static struct usb_device_id ti_id_table_5052[5+TI_EXTRA_VID_PID_COUNT+1] = {
......@@ -188,7 +189,7 @@ static struct usb_device_id ti_id_table_5052[5+TI_EXTRA_VID_PID_COUNT+1] = {
{ USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
};
static struct usb_device_id ti_id_table_combined[17+2*TI_EXTRA_VID_PID_COUNT+1] = {
static struct usb_device_id ti_id_table_combined[18+2*TI_EXTRA_VID_PID_COUNT+1] = {
{ USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
{ USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
{ USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) },
......@@ -206,6 +207,7 @@ static struct usb_device_id ti_id_table_combined[17+2*TI_EXTRA_VID_PID_COUNT+1]
{ USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
{ USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) },
{ USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) },
{ USB_DEVICE(ABBOTT_VENDOR_ID, ABBOTT_PRODUCT_ID) },
{ }
};
......
......@@ -49,6 +49,10 @@
#define MTS_MT9234ZBA_PRODUCT_ID 0xF115
#define MTS_MT9234ZBAOLD_PRODUCT_ID 0x0319
/* Abbott Diabetics vendor and product ids */
#define ABBOTT_VENDOR_ID 0x1a61
#define ABBOTT_PRODUCT_ID 0x3410
/* Commands */
#define TI_GET_VERSION 0x01
#define TI_GET_PORT_STATUS 0x02
......
......@@ -788,15 +788,19 @@ static void quiesce_and_remove_host(struct us_data *us)
struct Scsi_Host *host = us_to_host(us);
/* If the device is really gone, cut short reset delays */
if (us->pusb_dev->state == USB_STATE_NOTATTACHED)
if (us->pusb_dev->state == USB_STATE_NOTATTACHED) {
set_bit(US_FLIDX_DISCONNECTING, &us->dflags);
wake_up(&us->delay_wait);
}
/* Prevent SCSI-scanning (if it hasn't started yet)
* and wait for the SCSI-scanning thread to stop.
/* Prevent SCSI scanning (if it hasn't started yet)
* or wait for the SCSI-scanning routine to stop.
*/
set_bit(US_FLIDX_DONT_SCAN, &us->dflags);
wake_up(&us->delay_wait);
wait_for_completion(&us->scanning_done);
cancel_delayed_work_sync(&us->scan_dwork);
/* Balance autopm calls if scanning was cancelled */
if (test_bit(US_FLIDX_SCAN_PENDING, &us->dflags))
usb_autopm_put_interface_no_suspend(us->pusb_intf);
/* Removing the host will perform an orderly shutdown: caches
* synchronized, disks spun down, etc.
......@@ -823,53 +827,28 @@ static void release_everything(struct us_data *us)
scsi_host_put(us_to_host(us));
}
/* Thread to carry out delayed SCSI-device scanning */
static int usb_stor_scan_thread(void * __us)
/* Delayed-work routine to carry out SCSI-device scanning */
static void usb_stor_scan_dwork(struct work_struct *work)
{
struct us_data *us = (struct us_data *)__us;
struct us_data *us = container_of(work, struct us_data,
scan_dwork.work);
struct device *dev = &us->pusb_intf->dev;
dev_dbg(dev, "device found\n");
set_freezable();
dev_dbg(dev, "starting scan\n");
/*
* Wait for the timeout to expire or for a disconnect
*
* We can't freeze in this thread or we risk causing khubd to
* fail to freeze, but we can't be non-freezable either. Nor can
* khubd freeze while waiting for scanning to complete as it may
* hold the device lock, causing a hang when suspending devices.
* So instead of using wait_event_freezable(), explicitly test
* for (DONT_SCAN || freezing) in interruptible wait and proceed
* if any of DONT_SCAN, freezing or timeout has happened.
*/
if (delay_use > 0) {
dev_dbg(dev, "waiting for device to settle "
"before scanning\n");
wait_event_interruptible_timeout(us->delay_wait,
test_bit(US_FLIDX_DONT_SCAN, &us->dflags) ||
freezing(current), delay_use * HZ);
/* For bulk-only devices, determine the max LUN value */
if (us->protocol == USB_PR_BULK && !(us->fflags & US_FL_SINGLE_LUN)) {
mutex_lock(&us->dev_mutex);
us->max_lun = usb_stor_Bulk_max_lun(us);
mutex_unlock(&us->dev_mutex);
}
scsi_scan_host(us_to_host(us));
dev_dbg(dev, "scan complete\n");
/* If the device is still connected, perform the scanning */
if (!test_bit(US_FLIDX_DONT_SCAN, &us->dflags)) {
/* For bulk-only devices, determine the max LUN value */
if (us->protocol == USB_PR_BULK &&
!(us->fflags & US_FL_SINGLE_LUN)) {
mutex_lock(&us->dev_mutex);
us->max_lun = usb_stor_Bulk_max_lun(us);
mutex_unlock(&us->dev_mutex);
}
scsi_scan_host(us_to_host(us));
dev_dbg(dev, "scan complete\n");
/* Should we unbind if no devices were detected? */
}
/* Should we unbind if no devices were detected? */
usb_autopm_put_interface(us->pusb_intf);
complete_and_exit(&us->scanning_done, 0);
clear_bit(US_FLIDX_SCAN_PENDING, &us->dflags);
}
static unsigned int usb_stor_sg_tablesize(struct usb_interface *intf)
......@@ -916,7 +895,7 @@ int usb_stor_probe1(struct us_data **pus,
init_completion(&us->cmnd_ready);
init_completion(&(us->notify));
init_waitqueue_head(&us->delay_wait);
init_completion(&us->scanning_done);
INIT_DELAYED_WORK(&us->scan_dwork, usb_stor_scan_dwork);
/* Associate the us_data structure with the USB device */
result = associate_dev(us, intf);
......@@ -947,7 +926,6 @@ EXPORT_SYMBOL_GPL(usb_stor_probe1);
/* Second part of general USB mass-storage probing */
int usb_stor_probe2(struct us_data *us)
{
struct task_struct *th;
int result;
struct device *dev = &us->pusb_intf->dev;
......@@ -988,20 +966,14 @@ int usb_stor_probe2(struct us_data *us)
goto BadDevice;
}
/* Start up the thread for delayed SCSI-device scanning */
th = kthread_create(usb_stor_scan_thread, us, "usb-stor-scan");
if (IS_ERR(th)) {
dev_warn(dev,
"Unable to start the device-scanning thread\n");
complete(&us->scanning_done);
quiesce_and_remove_host(us);
result = PTR_ERR(th);
goto BadDevice;
}
/* Submit the delayed_work for SCSI-device scanning */
usb_autopm_get_interface_no_resume(us->pusb_intf);
wake_up_process(th);
set_bit(US_FLIDX_SCAN_PENDING, &us->dflags);
if (delay_use > 0)
dev_dbg(dev, "waiting for device to settle before scanning\n");
queue_delayed_work(system_freezable_wq, &us->scan_dwork,
delay_use * HZ);
return 0;
/* We come here if there are any problems */
......
......@@ -47,6 +47,7 @@
#include <linux/blkdev.h>
#include <linux/completion.h>
#include <linux/mutex.h>
#include <linux/workqueue.h>
#include <scsi/scsi_host.h>
struct us_data;
......@@ -72,7 +73,7 @@ struct us_unusual_dev {
#define US_FLIDX_DISCONNECTING 3 /* disconnect in progress */
#define US_FLIDX_RESETTING 4 /* device reset in progress */
#define US_FLIDX_TIMED_OUT 5 /* SCSI midlayer timed out */
#define US_FLIDX_DONT_SCAN 6 /* don't scan (disconnect) */
#define US_FLIDX_SCAN_PENDING 6 /* scanning not yet done */
#define US_FLIDX_REDO_READ10 7 /* redo READ(10) command */
#define US_FLIDX_READ10_WORKED 8 /* previous READ(10) succeeded */
......@@ -147,8 +148,8 @@ struct us_data {
/* mutual exclusion and synchronization structures */
struct completion cmnd_ready; /* to sleep thread on */
struct completion notify; /* thread begin/end */
wait_queue_head_t delay_wait; /* wait during scan, reset */
struct completion scanning_done; /* wait for scan thread */
wait_queue_head_t delay_wait; /* wait during reset */
struct delayed_work scan_dwork; /* for async scanning */
/* subdriver information */
void *extra; /* Any extra data */
......
......@@ -61,12 +61,6 @@
#define USB_PORT_FEAT_TEST 21
#define USB_PORT_FEAT_INDICATOR 22
#define USB_PORT_FEAT_C_PORT_L1 23
#define USB_PORT_FEAT_C_PORT_LINK_STATE 25
#define USB_PORT_FEAT_C_PORT_CONFIG_ERROR 26
#define USB_PORT_FEAT_PORT_REMOTE_WAKE_MASK 27
#define USB_PORT_FEAT_BH_PORT_RESET 28
#define USB_PORT_FEAT_C_BH_PORT_RESET 29
#define USB_PORT_FEAT_FORCE_LINKPM_ACCEPT 30
/*
* Port feature selectors added by USB 3.0 spec.
......@@ -75,8 +69,8 @@
#define USB_PORT_FEAT_LINK_STATE 5
#define USB_PORT_FEAT_U1_TIMEOUT 23
#define USB_PORT_FEAT_U2_TIMEOUT 24
#define USB_PORT_FEAT_C_LINK_STATE 25
#define USB_PORT_FEAT_C_CONFIG_ERR 26
#define USB_PORT_FEAT_C_PORT_LINK_STATE 25
#define USB_PORT_FEAT_C_PORT_CONFIG_ERROR 26
#define USB_PORT_FEAT_REMOTE_WAKE_MASK 27
#define USB_PORT_FEAT_BH_PORT_RESET 28
#define USB_PORT_FEAT_C_BH_PORT_RESET 29
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment