Commit 459b086d authored by Jeffy Chen's avatar Jeffy Chen Committed by Sean Paul

drm/rockchip: Set line flag config register in vop_crtc_enable

We need to set vop config done after update line flag config, it's a
new requirement for chips newer than rk3368.

Since we would only use line flag irq for vact_end, let's move it to
vop_crtc_enable.
Signed-off-by: default avatarJeffy Chen <jeffy.chen@rock-chips.com>
Acked-by: Mark Yao <mark.yao@rock-chips.com
Signed-off-by: default avatarSean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1493276057-4516-1-git-send-email-jeffy.chen@rock-chips.com
parent d753e41d
......@@ -115,7 +115,7 @@ static void analogix_dp_psr_work(struct work_struct *work)
vact_end = crtc->mode.vtotal - crtc->mode.vsync_start + crtc->mode.vdisplay;
ret = rockchip_drm_wait_line_flag(dp->encoder.crtc, vact_end,
ret = rockchip_drm_wait_vact_end(dp->encoder.crtc,
PSR_WAIT_LINE_FLAG_TIMEOUT_MS);
if (ret) {
dev_err(dp->dev, "line flag interrupt did not arrive\n");
......
......@@ -62,8 +62,7 @@ int rockchip_drm_dma_attach_device(struct drm_device *drm_dev,
struct device *dev);
void rockchip_drm_dma_detach_device(struct drm_device *drm_dev,
struct device *dev);
int rockchip_drm_wait_line_flag(struct drm_crtc *crtc, unsigned int line_num,
unsigned int mstimeout);
int rockchip_drm_wait_vact_end(struct drm_crtc *crtc, unsigned int mstimeout);
extern struct platform_driver cdn_dp_driver;
extern struct platform_driver dw_hdmi_rockchip_pltfm_driver;
......
......@@ -468,7 +468,7 @@ static bool vop_line_flag_irq_is_enabled(struct vop *vop)
return !!line_flag_irq;
}
static void vop_line_flag_irq_enable(struct vop *vop, int line_num)
static void vop_line_flag_irq_enable(struct vop *vop)
{
unsigned long flags;
......@@ -477,7 +477,6 @@ static void vop_line_flag_irq_enable(struct vop *vop, int line_num)
spin_lock_irqsave(&vop->irq_lock, flags);
VOP_CTRL_SET(vop, line_flag_num[0], line_num);
VOP_INTR_SET_TYPE(vop, clear, LINE_FLAG_INTR, 1);
VOP_INTR_SET_TYPE(vop, enable, LINE_FLAG_INTR, 1);
......@@ -981,6 +980,8 @@ static void vop_crtc_enable(struct drm_crtc *crtc)
VOP_CTRL_SET(vop, vact_st_end, val);
VOP_CTRL_SET(vop, vpost_st_end, val);
VOP_CTRL_SET(vop, line_flag_num[0], vact_end);
clk_set_rate(vop->dclk, adjusted_mode->clock * 1000);
VOP_CTRL_SET(vop, standby, 0);
......@@ -1507,19 +1508,16 @@ static void vop_win_init(struct vop *vop)
}
/**
* rockchip_drm_wait_line_flag - acqiure the give line flag event
* rockchip_drm_wait_vact_end
* @crtc: CRTC to enable line flag
* @line_num: interested line number
* @mstimeout: millisecond for timeout
*
* Driver would hold here until the interested line flag interrupt have
* happened or timeout to wait.
* Wait for vact_end line flag irq or timeout.
*
* Returns:
* Zero on success, negative errno on failure.
*/
int rockchip_drm_wait_line_flag(struct drm_crtc *crtc, unsigned int line_num,
unsigned int mstimeout)
int rockchip_drm_wait_vact_end(struct drm_crtc *crtc, unsigned int mstimeout)
{
struct vop *vop = to_vop(crtc);
unsigned long jiffies_left;
......@@ -1527,14 +1525,14 @@ int rockchip_drm_wait_line_flag(struct drm_crtc *crtc, unsigned int line_num,
if (!crtc || !vop->is_enabled)
return -ENODEV;
if (line_num > crtc->mode.vtotal || mstimeout <= 0)
if (mstimeout <= 0)
return -EINVAL;
if (vop_line_flag_irq_is_enabled(vop))
return -EBUSY;
reinit_completion(&vop->line_flag_completion);
vop_line_flag_irq_enable(vop, line_num);
vop_line_flag_irq_enable(vop);
jiffies_left = wait_for_completion_timeout(&vop->line_flag_completion,
msecs_to_jiffies(mstimeout));
......@@ -1547,7 +1545,7 @@ int rockchip_drm_wait_line_flag(struct drm_crtc *crtc, unsigned int line_num,
return 0;
}
EXPORT_SYMBOL(rockchip_drm_wait_line_flag);
EXPORT_SYMBOL(rockchip_drm_wait_vact_end);
static int vop_bind(struct device *dev, struct device *master, void *data)
{
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment