Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] SB1: Check for -mno-sched-prolog if building corelis debug kernel.
  [MIPS] Sibyte: Fix race in sb1250_gettimeoffset().
  [MIPS] Sibyte: Fix interrupt timer off by one bug.
  [MIPS] Sibyte: Fix M_SCD_TIMER_INIT and M_SCD_TIMER_CNT wrong field width.
  [MIPS] Protect more of timer_interrupt() by xtime_lock.
  [MIPS] Work around bad code generation for <asm/io.h>.
  [MIPS] Simple patch to power off DBAU1200
  [MIPS] Fix DBAu1550 software power off.
  [MIPS] local_r4k_flush_cache_page fix
  [MIPS] SB1: Fix interrupt disable hazard.
  [MIPS] Get rid of the IP22-specific code in arclib.
  Update MAINTAINERS entry for MIPS.

MAINTAINERS

@@ -1752,7 +1752,8 @@ P:	Ralf Baechle
 M:	ralf@linux-mips.org
 W:	http://www.linux-mips.org/
 L:	linux-mips@linux-mips.org
-S:	Maintained
+T:	git www.linux-mips.org:/pub/scm/linux.git
+S:	Supported
 
 MISCELLANEOUS MCA-SUPPORT
 P:	James Bottomley

arch/mips/Makefile

@@ -108,7 +108,8 @@ MODFLAGS			+= -mlong-calls
 cflags-$(CONFIG_CPU_BIG_ENDIAN)		+= $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' && echo -EB)
 cflags-$(CONFIG_CPU_LITTLE_ENDIAN)	+= $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' || echo -EL)
 
-cflags-$(CONFIG_SB1XXX_CORELIS)	+= -mno-sched-prolog -fno-omit-frame-pointer
+cflags-$(CONFIG_SB1XXX_CORELIS)	+= $(call cc-option,-mno-sched-prolog) \
+				   -fno-omit-frame-pointer
 
 #
 # Use: $(call set_gccflags,<cpu0>,<isa0>,<cpu1>,<isa1>,<isa2>)

arch/mips/arc/misc.c

@@ -9,7 +9,6 @@
  * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org)
  * Copyright (C) 1999 Silicon Graphics, Inc.
  */
-#include <linux/config.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 
@@ -20,17 +19,11 @@
 #include <asm/bootinfo.h>
 #include <asm/system.h>
 
-extern void *sgiwd93_host;
-extern void reset_wd33c93(void *instance);
-
 VOID
 ArcHalt(VOID)
 {
 	bc_disable();
 	local_irq_disable();
-#ifdef CONFIG_SCSI_SGIWD93
-	reset_wd33c93(sgiwd93_host);
-#endif
 	ARC_CALL0(halt);
 never:	goto never;
 }
@@ -40,9 +33,6 @@ ArcPowerDown(VOID)
 {
 	bc_disable();
 	local_irq_disable();
-#ifdef CONFIG_SCSI_SGIWD93
-	reset_wd33c93(sgiwd93_host);
-#endif
 	ARC_CALL0(pdown);
 never:	goto never;
 }
@@ -53,9 +43,6 @@ ArcRestart(VOID)
 {
 	bc_disable();
 	local_irq_disable();
-#ifdef CONFIG_SCSI_SGIWD93
-	reset_wd33c93(sgiwd93_host);
-#endif
 	ARC_CALL0(restart);
 never:	goto never;
 }
@@ -65,9 +52,6 @@ ArcReboot(VOID)
 {
 	bc_disable();
 	local_irq_disable();
-#ifdef CONFIG_SCSI_SGIWD93
-	reset_wd33c93(sgiwd93_host);
-#endif
 	ARC_CALL0(reboot);
 never:	goto never;
 }
@@ -77,9 +61,6 @@ ArcEnterInteractiveMode(VOID)
 {
 	bc_disable();
 	local_irq_disable();
-#ifdef CONFIG_SCSI_SGIWD93
-	reset_wd33c93(sgiwd93_host);
-#endif
 	ARC_CALL0(imode);
 never:	goto never;
 }

arch/mips/au1000/common/reset.c

@@ -164,17 +164,20 @@ void au1000_restart(char *command)
 
 void au1000_halt(void)
 {
-#if defined(CONFIG_MIPS_PB1550)
+#if defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550)
 	/* power off system */
-	printk("\n** Powering off Pb1550\n");
+	printk("\n** Powering off...\n");
 	au_writew(au_readw(0xAF00001C) | (3<<14), 0xAF00001C);
 	au_sync();
 	while(1); /* should not get here */
-#endif
+#else
 	printk(KERN_NOTICE "\n** You can safely turn off the power\n");
 #ifdef CONFIG_MIPS_MIRAGE
 	au_writel((1 << 26) | (1 << 10), GPIO2_OUTPUT);
 #endif
+#ifdef CONFIG_MIPS_DB1200
+	au_writew(au_readw(0xB980001C) | (1<<14), 0xB980001C);
+#endif
 #ifdef CONFIG_PM
 	au_sleep();
 
@@ -187,6 +190,7 @@ void au1000_halt(void)
 	                "wait\n\t"
 			".set\tmips0");
 #endif
+#endif /* defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550) */
 }
 
 void au1000_power_off(void)

arch/mips/kernel/time.c

@@ -424,6 +424,8 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 	unsigned long j;
 	unsigned int count;
 
+	write_seqlock(&xtime_lock);
+
 	count = mips_hpt_read();
 	mips_timer_ack();
 
@@ -441,7 +443,6 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 	 * CMOS clock accordingly every ~11 minutes. rtc_set_time() has to be
 	 * called as close as possible to 500 ms before the new second starts.
 	 */
-	write_seqlock(&xtime_lock);
 	if (ntp_synced() &&
 	    xtime.tv_sec > last_rtc_update + 660 &&
 	    (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
@@ -453,7 +454,6 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 			last_rtc_update = xtime.tv_sec - 600;
 		}
 	}
-	write_sequnlock(&xtime_lock);
 
 	/*
 	 * If jiffies has overflown in this timer_interrupt, we must
@@ -496,6 +496,8 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 		}
 	}
 
+	write_sequnlock(&xtime_lock);
+
 	/*
 	 * In UP mode, we call local_timer_interrupt() to do profiling
 	 * and process accouting.

arch/mips/mm/c-r4k.c

@@ -375,6 +375,7 @@ static void r4k_flush_cache_mm(struct mm_struct *mm)
 struct flush_cache_page_args {
 	struct vm_area_struct *vma;
 	unsigned long addr;
+	unsigned long pfn;
 };
 
 static inline void local_r4k_flush_cache_page(void *args)
@@ -382,6 +383,7 @@ static inline void local_r4k_flush_cache_page(void *args)
 	struct flush_cache_page_args *fcp_args = args;
 	struct vm_area_struct *vma = fcp_args->vma;
 	unsigned long addr = fcp_args->addr;
+	unsigned long paddr = fcp_args->pfn << PAGE_SHIFT;
 	int exec = vma->vm_flags & VM_EXEC;
 	struct mm_struct *mm = vma->vm_mm;
 	pgd_t *pgdp;
@@ -431,11 +433,12 @@ static inline void local_r4k_flush_cache_page(void *args)
 	 * Do indexed flush, too much work to get the (possible) TLB refills
 	 * to work correctly.
 	 */
-	addr = INDEX_BASE + (addr & (dcache_size - 1));
 	if (cpu_has_dc_aliases || (exec && !cpu_has_ic_fills_f_dc)) {
-		r4k_blast_dcache_page_indexed(addr);
-		if (exec && !cpu_icache_snoops_remote_store)
-			r4k_blast_scache_page_indexed(addr);
+		r4k_blast_dcache_page_indexed(cpu_has_pindexed_dcache ?
+					      paddr : addr);
+		if (exec && !cpu_icache_snoops_remote_store) {
+			r4k_blast_scache_page_indexed(paddr);
+		}
 	}
 	if (exec) {
 		if (cpu_has_vtag_icache) {
@@ -455,6 +458,7 @@ static void r4k_flush_cache_page(struct vm_area_struct *vma,
 
 	args.vma = vma;
 	args.addr = addr;
+	args.pfn = pfn;
 
 	on_each_cpu(local_r4k_flush_cache_page, &args, 1, 1);
 }
@@ -956,6 +960,7 @@ static void __init probe_pcache(void)
 	switch (c->cputype) {
 	case CPU_20KC:
 	case CPU_25KF:
+		c->dcache.flags |= MIPS_CACHE_PINDEX;
 	case CPU_R10000:
 	case CPU_R12000:
 	case CPU_SB1:

arch/mips/mm/c-tx39.c

@@ -210,7 +210,6 @@ static void tx39_flush_cache_page(struct vm_area_struct *vma, unsigned long page
 	 * Do indexed flush, too much work to get the (possible) TLB refills
 	 * to work correctly.
 	 */
-	page = (KSEG0 + (page & (dcache_size - 1)));
 	if (cpu_has_dc_aliases || exec)
 		tx39_blast_dcache_page_indexed(page);
 	if (exec)

arch/mips/sibyte/sb1250/time.c

@@ -47,23 +47,51 @@
 #define IMR_IP3_VAL	K_INT_MAP_I1
 #define IMR_IP4_VAL	K_INT_MAP_I2
 
+#define SB1250_HPT_NUM		3
+#define SB1250_HPT_VALUE	M_SCD_TIMER_CNT /* max value */
+#define SB1250_HPT_SHIFT	((sizeof(unsigned int)*8)-V_SCD_TIMER_WIDTH)
+
+
 extern int sb1250_steal_irq(int irq);
 
+static unsigned int sb1250_hpt_read(void);
+static void sb1250_hpt_init(unsigned int);
+
+static unsigned int hpt_offset;
+
+void __init sb1250_hpt_setup(void)
+{
+	int cpu = smp_processor_id();
+
+	if (!cpu) {
+		/* Setup hpt using timer #3 but do not enable irq for it */
+		__raw_writeq(0, IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_CFG)));
+		__raw_writeq(SB1250_HPT_VALUE,
+			     IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_INIT)));
+		__raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
+			     IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_CFG)));
+
+		/*
+		 * we need to fill 32 bits, so just use the upper 23 bits and pretend
+		 * the timer is going 512Mhz instead of 1Mhz
+		 */
+		mips_hpt_frequency = V_SCD_TIMER_FREQ << SB1250_HPT_SHIFT;
+		mips_hpt_init = sb1250_hpt_init;
+		mips_hpt_read = sb1250_hpt_read;
+	}
+}
+
+
 void sb1250_time_init(void)
 {
 	int cpu = smp_processor_id();
 	int irq = K_INT_TIMER_0+cpu;
 
-	/* Only have 4 general purpose timers */
-	if (cpu > 3) {
+	/* Only have 4 general purpose timers, and we use last one as hpt */
+	if (cpu > 2) {
 		BUG();
 	}
 
-	if (!cpu) {
-		/* Use our own gettimeoffset() routine */
-		do_gettimeoffset = sb1250_gettimeoffset;
-	}
-
 	sb1250_mask_irq(cpu, irq);
 
 	/* Map the timer interrupt to ip[4] of this cpu */
@@ -75,10 +103,10 @@ void sb1250_time_init(void)
 	/* Disable the timer and set up the count */
 	__raw_writeq(0, IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
 #ifdef CONFIG_SIMULATION
-	__raw_writeq(50000 / HZ,
+	__raw_writeq((50000 / HZ) - 1,
 		     IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)));
 #else
-	__raw_writeq(1000000 / HZ,
+	__raw_writeq((V_SCD_TIMER_FREQ / HZ) - 1,
 		     IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT)));
 #endif
 
@@ -103,7 +131,7 @@ void sb1250_timer_interrupt(struct pt_regs *regs)
 	int cpu = smp_processor_id();
 	int irq = K_INT_TIMER_0 + cpu;
 
-	/* Reset the timer */
+	/* ACK interrupt */
 	____raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
 		       IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
 
@@ -122,15 +150,26 @@ void sb1250_timer_interrupt(struct pt_regs *regs)
 }
 
 /*
- * We use our own do_gettimeoffset() instead of the generic one,
- * because the generic one does not work for SMP case.
- * In addition, since we use general timer 0 for system time,
- * we can get accurate intra-jiffy offset without calibration.
+ * The HPT is free running from SB1250_HPT_VALUE down to 0 then starts over
+ * again. There's no easy way to set to a specific value so store init value
+ * in hpt_offset and subtract each time.
+ *
+ * Note: Timer isn't full 32bits so shift it into the upper part making
+ *       it appear to run at a higher frequency.
  */
-unsigned long sb1250_gettimeoffset(void)
+static unsigned int sb1250_hpt_read(void)
 {
-	unsigned long count =
-		__raw_readq(IOADDR(A_SCD_TIMER_REGISTER(0, R_SCD_TIMER_CNT)));
+	unsigned int count;
 
-	return 1000000/HZ - count;
- }
+	count = G_SCD_TIMER_CNT(__raw_readq(IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_CNT))));
+
+	count = (SB1250_HPT_VALUE - count) << SB1250_HPT_SHIFT;
+
+	return count - hpt_offset;
+}
+
+static void sb1250_hpt_init(unsigned int count)
+{
+	hpt_offset = count;
+	return;
+}

arch/mips/sibyte/swarm/setup.c

@@ -70,6 +70,12 @@ const char *get_system_type(void)
 	return "SiByte " SIBYTE_BOARD_NAME;
 }
 
+void __init swarm_time_init(void)
+{
+	/* Setup HPT */
+	sb1250_hpt_setup();
+}
+
 void __init swarm_timer_setup(struct irqaction *irq)
 {
         /*
@@ -109,6 +115,7 @@ void __init plat_setup(void)
 
 	panic_timeout = 5;  /* For debug.  */
 
+	board_time_init = swarm_time_init;
 	board_timer_setup = swarm_timer_setup;
 	board_be_handler = swarm_be_handler;
 

include/asm-mips/cpu-features.h

@@ -96,6 +96,9 @@
 #ifndef cpu_has_ic_fills_f_dc
 #define cpu_has_ic_fills_f_dc	(cpu_data[0].icache.flags & MIPS_CACHE_IC_F_DC)
 #endif
+#ifndef cpu_has_pindexed_dcache
+#define cpu_has_pindexed_dcache	(cpu_data[0].dcache.flags & MIPS_CACHE_PINDEX)
+#endif
 
 /*
  * I-Cache snoops remote store.  This only matters on SMP.  Some multiprocessors

include/asm-mips/cpu-info.h

@@ -39,6 +39,7 @@ struct cache_desc {
 #define MIPS_CACHE_ALIASES	0x00000004	/* Cache could have aliases */
 #define MIPS_CACHE_IC_F_DC	0x00000008	/* Ic can refill from D-cache */
 #define MIPS_IC_SNOOPS_REMOTE	0x00000010	/* Ic snoops remote stores */
+#define MIPS_CACHE_PINDEX	0x00000020	/* Physically indexed cache */
 
 struct cpuinfo_mips {
 	unsigned long		udelay_val;

include/asm-mips/hazards.h

@@ -3,7 +3,9 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (C) 2003, 2004 Ralf Baechle
+ * Copyright (C) 2003, 2004 Ralf Baechle <ralf@linux-mips.org>
+ * Copyright (C) MIPS Technologies, Inc.
+ *   written by Ralf Baechle <ralf@linux-mips.org>
  */
 #ifndef _ASM_HAZARDS_H
 #define _ASM_HAZARDS_H
@@ -74,8 +76,7 @@
 #define irq_disable_hazard
 	_ehb
 
-#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000) || \
-      defined(CONFIG_CPU_SB1)
+#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000)
 
 /*
  * R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer.
@@ -99,13 +100,13 @@
 #else /* __ASSEMBLY__ */
 
 __asm__(
-	"	.macro	_ssnop					\n\t"
-	"	sll	$0, $0, 1				\n\t"
-	"	.endm						\n\t"
-	"							\n\t"
-	"	.macro	_ehb					\n\t"
-	"	sll	$0, $0, 3				\n\t"
-	"	.endm						\n\t");
+	"	.macro	_ssnop					\n"
+	"	sll	$0, $0, 1				\n"
+	"	.endm						\n"
+	"							\n"
+	"	.macro	_ehb					\n"
+	"	sll	$0, $0, 3				\n"
+	"	.endm						\n");
 
 #ifdef CONFIG_CPU_RM9000
 
@@ -117,17 +118,21 @@ __asm__(
 
 #define mtc0_tlbw_hazard()						\
 	__asm__ __volatile__(						\
-		".set\tmips32\n\t"					\
-		"_ssnop; _ssnop; _ssnop; _ssnop\n\t"			\
-		".set\tmips0")
+	"	.set	mips32					\n"	\
+	"	_ssnop						\n"	\
+	"	_ssnop						\n"	\
+	"	_ssnop						\n"	\
+	"	_ssnop						\n"	\
+	"	.set	mips0					\n")
 
 #define tlbw_use_hazard()						\
 	__asm__ __volatile__(						\
-		".set\tmips32\n\t"					\
-		"_ssnop; _ssnop; _ssnop; _ssnop\n\t"			\
-		".set\tmips0")
-
-#define back_to_back_c0_hazard()	do { } while (0)
+	"	.set	mips32					\n"	\
+	"	_ssnop						\n"	\
+	"	_ssnop						\n"	\
+	"	_ssnop						\n"	\
+	"	_ssnop						\n"	\
+	"	.set	mips0					\n")
 
 #else
 
@@ -136,15 +141,25 @@ __asm__(
  */
 #define mtc0_tlbw_hazard()						\
 	__asm__ __volatile__(						\
-		".set noreorder\n\t"					\
-		"nop; nop; nop; nop; nop; nop;\n\t"			\
-		".set reorder\n\t")
+	"	.set	noreorder				\n"	\
+	"	nop						\n"	\
+	"	nop						\n"	\
+	"	nop						\n"	\
+	"	nop						\n"	\
+	"	nop						\n"	\
+	"	nop						\n"	\
+	"	.set	reorder					\n")
 
 #define tlbw_use_hazard()						\
 	__asm__ __volatile__(						\
-		".set noreorder\n\t"					\
-		"nop; nop; nop; nop; nop; nop;\n\t"			\
-		".set reorder\n\t")
+	"	.set	noreorder				\n"	\
+	"	nop						\n"	\
+	"	nop						\n"	\
+	"	nop						\n"	\
+	"	nop						\n"	\
+	"	nop						\n"	\
+	"	nop						\n"	\
+	"	.set	reorder					\n")
 
 #endif
 
@@ -156,49 +171,26 @@ __asm__(
 
 #ifdef CONFIG_CPU_MIPSR2
 
-__asm__(
-	"	.macro\tirq_enable_hazard			\n\t"
-	"	_ehb						\n\t"
-	"	.endm						\n\t"
-	"							\n\t"
-	"	.macro\tirq_disable_hazard			\n\t"
-	"	_ehb						\n\t"
-	"	.endm						\n\t"
-	"							\n\t"
-	"	.macro\tback_to_back_c0_hazard			\n\t"
-	"	_ehb						\n\t"
-	"	.endm");
-
-#define irq_enable_hazard()						\
-	__asm__ __volatile__(						\
-	"irq_enable_hazard")
-
-#define irq_disable_hazard()						\
-	__asm__ __volatile__(						\
-	"irq_disable_hazard")
+__asm__("	.macro	irq_enable_hazard			\n"
+	"	_ehb						\n"
+	"	.endm						\n"
+	"							\n"
+	"	.macro	irq_disable_hazard			\n"
+	"	_ehb						\n"
+	"	.endm						\n");
 
-#define back_to_back_c0_hazard()					\
-	__asm__ __volatile__(						\
-	"back_to_back_c0_hazard")
-
-#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000) || \
-      defined(CONFIG_CPU_SB1)
+#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000)
 
 /*
  * R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer.
  */
 
 __asm__(
-	"	.macro\tirq_enable_hazard			\n\t"
-	"	.endm						\n\t"
-	"							\n\t"
-	"	.macro\tirq_disable_hazard			\n\t"
-	"	.endm");
-
-#define irq_enable_hazard()	do { } while (0)
-#define irq_disable_hazard()	do { } while (0)
-
-#define back_to_back_c0_hazard()	do { } while (0)
+	"	.macro	irq_enable_hazard			\n"
+	"	.endm						\n"
+	"							\n"
+	"	.macro	irq_disable_hazard			\n"
+	"	.endm						\n");
 
 #else
 
@@ -209,29 +201,63 @@ __asm__(
  */
 
 __asm__(
-	"	#						\n\t"
-	"	# There is a hazard but we do not care		\n\t"
-	"	#						\n\t"
-	"	.macro\tirq_enable_hazard			\n\t"
-	"	.endm						\n\t"
-	"							\n\t"
-	"	.macro\tirq_disable_hazard			\n\t"
-	"	_ssnop; _ssnop; _ssnop				\n\t"
-	"	.endm");
+	"	#						\n"
+	"	# There is a hazard but we do not care		\n"
+	"	#						\n"
+	"	.macro\tirq_enable_hazard			\n"
+	"	.endm						\n"
+	"							\n"
+	"	.macro\tirq_disable_hazard			\n"
+	"	_ssnop						\n"
+	"	_ssnop						\n"
+	"	_ssnop						\n"
+	"	.endm						\n");
+
+#endif
 
-#define irq_enable_hazard()	do { } while (0)
+#define irq_enable_hazard()						\
+	__asm__ __volatile__("irq_enable_hazard")
 #define irq_disable_hazard()						\
-	__asm__ __volatile__(						\
-	"irq_disable_hazard")
+	__asm__ __volatile__("irq_disable_hazard")
 
-#define back_to_back_c0_hazard()					\
-	__asm__ __volatile__(						\
-	"	.set noreorder				\n"		\
-	"	nop; nop; nop				\n"		\
-	"	.set reorder				\n")
+
+/*
+ * Back-to-back hazards -
+ *
+ * What is needed to separate a move to cp0 from a subsequent read from the
+ * same cp0 register?
+ */
+#ifdef CONFIG_CPU_MIPSR2
+
+__asm__("	.macro	back_to_back_c0_hazard			\n"
+	"	_ehb						\n"
+	"	.endm						\n");
+
+#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_RM9000) || \
+      defined(CONFIG_CPU_SB1)
+
+__asm__("	.macro	back_to_back_c0_hazard			\n"
+	"	.endm						\n");
+
+#else
+
+__asm__("	.macro	back_to_back_c0_hazard			\n"
+	"	.set	noreorder				\n"
+	"	_ssnop						\n"
+	"	_ssnop						\n"
+	"	_ssnop						\n"
+	"	.set	reorder					\n"
+	"	.endm");
 
 #endif
 
+#define back_to_back_c0_hazard()					\
+	__asm__ __volatile__("back_to_back_c0_hazard")
+
+
+/*
+ * Instruction execution hazard
+ */
 #ifdef CONFIG_CPU_MIPSR2
 /*
  * gcc has a tradition of misscompiling the previous construct using the

include/asm-mips/io.h

@@ -4,7 +4,7 @@
  * for more details.
  *
  * Copyright (C) 1994, 1995 Waldorf GmbH
- * Copyright (C) 1994 - 2000 Ralf Baechle
+ * Copyright (C) 1994 - 2000, 06 Ralf Baechle
  * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
  * Copyright (C) 2004, 2005  MIPS Technologies, Inc.  All rights reserved.
  *	Author:	Maciej W. Rozycki <macro@mips.com>
@@ -103,8 +103,20 @@
  */
 extern const unsigned long mips_io_port_base;
 
-#define set_io_port_base(base)	\
-	do { * (unsigned long *) &mips_io_port_base = (base); } while (0)
+/*
+ * Gcc will generate code to load the value of mips_io_port_base after each
+ * function call which may be fairly wasteful in some cases.  So we don't
+ * play quite by the book.  We tell gcc mips_io_port_base is a long variable
+ * which solves the code generation issue.  Now we need to violate the
+ * aliasing rules a little to make initialization possible and finally we
+ * will need the barrier() to fight side effects of the aliasing chat.
+ * This trickery will eventually collapse under gcc's optimizer.  Oh well.
+ */
+static inline void set_io_port_base(unsigned long base)
+{
+	* (unsigned long *) &mips_io_port_base = base;
+	barrier();
+}
 
 /*
  * Thanks to James van Artsdalen for a better timing-fix than

include/asm-mips/r4kcache.h

@@ -257,7 +257,8 @@ static inline void blast_##pfx##cache##lsize##_page(unsigned long page)	\
 									\
 static inline void blast_##pfx##cache##lsize##_page_indexed(unsigned long page) \
 {									\
-	unsigned long start = page;					\
+	unsigned long indexmask = current_cpu_data.desc.waysize - 1;	\
+	unsigned long start = INDEX_BASE + (page & indexmask);		\
 	unsigned long end = start + PAGE_SIZE;				\
 	unsigned long ws_inc = 1UL << current_cpu_data.desc.waybit;	\
 	unsigned long ws_end = current_cpu_data.desc.ways <<		\

include/asm-mips/sibyte/sb1250.h

@@ -45,8 +45,8 @@ extern unsigned int soc_type;
 extern unsigned int periph_rev;
 extern unsigned int zbbus_mhz;
 
+extern void sb1250_hpt_setup(void);
 extern void sb1250_time_init(void);
-extern unsigned long sb1250_gettimeoffset(void);
 extern void sb1250_mask_irq(int cpu, int irq);
 extern void sb1250_unmask_irq(int cpu, int irq);
 extern void sb1250_smp_finish(void);

include/asm-mips/sibyte/sb1250_scd.h

@@ -359,14 +359,15 @@
  */
 
 #define V_SCD_TIMER_FREQ            1000000
+#define V_SCD_TIMER_WIDTH           23
 
 #define S_SCD_TIMER_INIT            0
-#define M_SCD_TIMER_INIT            _SB_MAKEMASK(20,S_SCD_TIMER_INIT)
+#define M_SCD_TIMER_INIT            _SB_MAKEMASK(V_SCD_TIMER_WIDTH,S_SCD_TIMER_INIT)
 #define V_SCD_TIMER_INIT(x)         _SB_MAKEVALUE(x,S_SCD_TIMER_INIT)
 #define G_SCD_TIMER_INIT(x)         _SB_GETVALUE(x,S_SCD_TIMER_INIT,M_SCD_TIMER_INIT)
 
 #define S_SCD_TIMER_CNT             0
-#define M_SCD_TIMER_CNT             _SB_MAKEMASK(20,S_SCD_TIMER_CNT)
+#define M_SCD_TIMER_CNT             _SB_MAKEMASK(V_SCD_TIMER_WIDTH,S_SCD_TIMER_CNT)
 #define V_SCD_TIMER_CNT(x)         _SB_MAKEVALUE(x,S_SCD_TIMER_CNT)
 #define G_SCD_TIMER_CNT(x)         _SB_GETVALUE(x,S_SCD_TIMER_CNT,M_SCD_TIMER_CNT)