Commit 46602698 authored by Bing Zhao's avatar Bing Zhao Committed by John W. Linville

libertas: fix crash for SD8688

For SD8688, FUNC_INIT command is queued before fw_ready flag is
set. This causes the following crash as lbs_thread blocks any
command if fw_ready is not set.

[  209.338953] [<c0502248>] (__schedule+0x610/0x764) from [<bf20ae24>] (__lbs_cmd+0xb8/0x130 [libertas])
[  209.348340] [<bf20ae24>] (__lbs_cmd+0xb8/0x130 [libertas]) from [<bf222474>] (if_sdio_finish_power_on+0xec/0x1b0 [libertas_sdio])
[  209.360136] [<bf222474>] (if_sdio_finish_power_on+0xec/0x1b0 [libertas_sdio]) from [<bf2226c4>] (if_sdio_power_on+0x18c/0x20c [libertas_sdio])
[  209.373052] [<bf2226c4>] (if_sdio_power_on+0x18c/0x20c [libertas_sdio]) from [<bf222944>] (if_sdio_probe+0x200/0x31c [libertas_sdio])
[  209.385316] [<bf222944>] (if_sdio_probe+0x200/0x31c [libertas_sdio]) from [<bf01d820>] (sdio_bus_probe+0x94/0xfc [mmc_core])
[  209.396748] [<bf01d820>] (sdio_bus_probe+0x94/0xfc [mmc_core]) from [<c02e729c>] (driver_probe_device+0x12c/0x348)
[  209.407214] [<c02e729c>] (driver_probe_device+0x12c/0x348) from [<c02e7530>] (__driver_attach+0x78/0x9c)
[  209.416798] [<c02e7530>] (__driver_attach+0x78/0x9c) from [<c02e5658>] (bus_for_each_dev+0x50/0x88)
[  209.425946] [<c02e5658>] (bus_for_each_dev+0x50/0x88) from [<c02e6810>] (bus_add_driver+0x108/0x268)
[  209.435180] [<c02e6810>] (bus_add_driver+0x108/0x268) from [<c02e782c>] (driver_register+0xa4/0x134)
[  209.444426] [<c02e782c>] (driver_register+0xa4/0x134) from [<bf22601c>] (if_sdio_init_module+0x1c/0x3c [libertas_sdio])
[  209.455339] [<bf22601c>] (if_sdio_init_module+0x1c/0x3c [libertas_sdio]) from [<c00085b8>] (do_one_initcall+0x98/0x174)
[  209.466236] [<c00085b8>] (do_one_initcall+0x98/0x174) from [<c0076504>] (load_module+0x1c5c/0x1f80)
[  209.475390] [<c0076504>] (load_module+0x1c5c/0x1f80) from [<c007692c>] (sys_init_module+0x104/0x128)
[  209.484632] [<c007692c>] (sys_init_module+0x104/0x128) from [<c0008c40>] (ret_fast_syscall+0x0/0x38)

Fix it by setting fw_ready flag prior to queuing FUNC_INIT command.

Cc: <stable@vger.kernel.org> # 3.5+
Reported-by: default avatarLubomir Rintel <lkundrak@v3.sk>
Tested-by: default avatarLubomir Rintel <lkundrak@v3.sk>
Signed-off-by: default avatarBing Zhao <bzhao@marvell.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 6ef9e2f6
...@@ -825,6 +825,11 @@ static void if_sdio_finish_power_on(struct if_sdio_card *card) ...@@ -825,6 +825,11 @@ static void if_sdio_finish_power_on(struct if_sdio_card *card)
sdio_release_host(func); sdio_release_host(func);
/* Set fw_ready before queuing any commands so that
* lbs_thread won't block from sending them to firmware.
*/
priv->fw_ready = 1;
/* /*
* FUNC_INIT is required for SD8688 WLAN/BT multiple functions * FUNC_INIT is required for SD8688 WLAN/BT multiple functions
*/ */
...@@ -839,7 +844,6 @@ static void if_sdio_finish_power_on(struct if_sdio_card *card) ...@@ -839,7 +844,6 @@ static void if_sdio_finish_power_on(struct if_sdio_card *card)
netdev_alert(priv->dev, "CMD_FUNC_INIT cmd failed\n"); netdev_alert(priv->dev, "CMD_FUNC_INIT cmd failed\n");
} }
priv->fw_ready = 1;
wake_up(&card->pwron_waitq); wake_up(&card->pwron_waitq);
if (!card->started) { if (!card->started) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment