doc-rst: linux_tv: split DVB function call documentation

Just like V4L, split the DVB function calls into one file per
system call. This is a requirement for the man pages creator
on Sphinx to work, and makes the document easier to maintain.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Documentation/linux_tv/media/dvb/audio-bilingual-channel-select.rst

+.. -*- coding: utf-8; mode: rst -*-
+
+.. _AUDIO_BILINGUAL_CHANNEL_SELECT:
+
+AUDIO_BILINGUAL_CHANNEL_SELECT
+==============================
+
+Description
+-----------
+
+This ioctl is obsolete. Do not use in new drivers. It has been replaced
+by the V4L2 ``V4L2_CID_MPEG_AUDIO_DEC_MULTILINGUAL_PLAYBACK`` control
+for MPEG decoders controlled through V4L2.
+
+This ioctl call asks the Audio Device to select the requested channel
+for bilingual streams if possible.
+
+Synopsis
+--------
+
+.. c:function:: int ioctl(int fd, int request = AUDIO_BILINGUAL_CHANNEL_SELECT, audio_channel_select_t)
+
+Arguments
+----------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals AUDIO_BILINGUAL_CHANNEL_SELECT for this command.
+
+    -  .. row 3
+
+       -  audio_channel_select_t ch
+
+       -  Select the output format of the audio (mono left/right, stereo).
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+

Documentation/linux_tv/media/dvb/audio-channel-select.rst

+.. -*- coding: utf-8; mode: rst -*-
+
+.. _AUDIO_CHANNEL_SELECT:
+
+AUDIO_CHANNEL_SELECT
+====================
+
+Description
+-----------
+
+This ioctl is for DVB devices only. To control a V4L2 decoder use the
+V4L2 ``V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK`` control instead.
+
+This ioctl call asks the Audio Device to select the requested channel if
+possible.
+
+Synopsis
+--------
+
+.. c:function:: int ioctl(int fd, int request = AUDIO_CHANNEL_SELECT, audio_channel_select_t)
+
+Arguments
+----------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals AUDIO_CHANNEL_SELECT for this command.
+
+    -  .. row 3
+
+       -  audio_channel_select_t ch
+
+       -  Select the output format of the audio (mono left/right, stereo).
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+

Documentation/linux_tv/media/dvb/audio-clear-buffer.rst

+.. -*- coding: utf-8; mode: rst -*-
+
+.. _AUDIO_CLEAR_BUFFER:
+
+AUDIO_CLEAR_BUFFER
+==================
+
+Description
+-----------
+
+This ioctl call asks the Audio Device to clear all software and hardware
+buffers of the audio decoder device.
+
+Synopsis
+--------
+
+.. c:function:: int  ioctl(int fd, int request = AUDIO_CLEAR_BUFFER)
+
+Arguments
+----------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals AUDIO_CLEAR_BUFFER for this command.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+

Documentation/linux_tv/media/dvb/audio-continue.rst

+.. -*- coding: utf-8; mode: rst -*-
+
+.. _AUDIO_CONTINUE:
+
+AUDIO_CONTINUE
+==============
+
+Description
+-----------
+
+This ioctl restarts the decoding and playing process previously paused
+with AUDIO_PAUSE command.
+
+Synopsis
+--------
+
+.. c:function:: int  ioctl(int fd, int request = AUDIO_CONTINUE)
+
+Arguments
+----------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals AUDIO_CONTINUE for this command.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+

Documentation/linux_tv/media/dvb/audio-fclose.rst

+.. -*- coding: utf-8; mode: rst -*-
+
+.. _audio_fclose:
+
+DVB audio close()
+=================
+
+Description
+-----------
+
+This system call closes a previously opened audio device.
+
+Synopsis
+--------
+
+.. c:function:: int  close(int fd)
+
+Arguments
+----------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+
+Return Value
+------------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ``EBADF``
+
+       -  fd is not a valid open file descriptor.
+
+
+

Documentation/linux_tv/media/dvb/audio-fopen.rst

+.. -*- coding: utf-8; mode: rst -*-
+
+.. _audio_fopen:
+
+DVB audio open()
+================
+
+Description
+-----------
+
+This system call opens a named audio device (e.g.
+/dev/dvb/adapter0/audio0) for subsequent use. When an open() call has
+succeeded, the device will be ready for use. The significance of
+blocking or non-blocking mode is described in the documentation for
+functions where there is a difference. It does not affect the semantics
+of the open() call itself. A device opened in blocking mode can later be
+put into non-blocking mode (and vice versa) using the F_SETFL command
+of the fcntl system call. This is a standard system call, documented in
+the Linux manual page for fcntl. Only one user can open the Audio Device
+in O_RDWR mode. All other attempts to open the device in this mode will
+fail, and an error code will be returned. If the Audio Device is opened
+in O_RDONLY mode, the only ioctl call that can be used is
+AUDIO_GET_STATUS. All other call will return with an error code.
+
+Synopsis
+--------
+
+.. c:function:: int  open(const char *deviceName, int flags)
+
+Arguments
+----------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  const char \*deviceName
+
+       -  Name of specific audio device.
+
+    -  .. row 2
+
+       -  int flags
+
+       -  A bit-wise OR of the following flags:
+
+    -  .. row 3
+
+       -
+       -  O_RDONLY read-only access
+
+    -  .. row 4
+
+       -
+       -  O_RDWR read/write access
+
+    -  .. row 5
+
+       -
+       -  O_NONBLOCK open in non-blocking mode
+
+    -  .. row 6
+
+       -
+       -  (blocking mode is the default)
+
+
+Return Value
+------------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ``ENODEV``
+
+       -  Device driver not loaded/available.
+
+    -  .. row 2
+
+       -  ``EBUSY``
+
+       -  Device or resource busy.
+
+    -  .. row 3
+
+       -  ``EINVAL``
+
+       -  Invalid argument.
+
+
+

Documentation/linux_tv/media/dvb/audio-fwrite.rst

+.. -*- coding: utf-8; mode: rst -*-
+
+.. _audio_fwrite:
+
+DVB audio write()
+=================
+
+Description
+-----------
+
+This system call can only be used if AUDIO_SOURCE_MEMORY is selected
+in the ioctl call AUDIO_SELECT_SOURCE. The data provided shall be in
+PES format. If O_NONBLOCK is not specified the function will block
+until buffer space is available. The amount of data to be transferred is
+implied by count.
+
+Synopsis
+--------
+
+.. c:function:: size_t write(int fd, const void *buf, size_t count)
+
+Arguments
+----------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  void \*buf
+
+       -  Pointer to the buffer containing the PES data.
+
+    -  .. row 3
+
+       -  size_t count
+
+       -  Size of buf.
+
+
+Return Value
+------------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ``EPERM``
+
+       -  Mode AUDIO_SOURCE_MEMORY not selected.
+
+    -  .. row 2
+
+       -  ``ENOMEM``
+
+       -  Attempted to write more data than the internal buffer can hold.
+
+    -  .. row 3
+
+       -  ``EBADF``
+
+       -  fd is not a valid open file descriptor.
+
+
+

Documentation/linux_tv/media/dvb/audio-get-capabilities.rst

+.. -*- coding: utf-8; mode: rst -*-
+
+.. _AUDIO_GET_CAPABILITIES:
+
+AUDIO_GET_CAPABILITIES
+======================
+
+Description
+-----------
+
+This ioctl call asks the Audio Device to tell us about the decoding
+capabilities of the audio hardware.
+
+Synopsis
+--------
+
+.. c:function:: int ioctl(int fd, int request = AUDIO_GET_CAPABILITIES, unsigned int *cap)
+
+Arguments
+----------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals AUDIO_GET_CAPABILITIES for this command.
+
+    -  .. row 3
+
+       -  unsigned int \*cap
+
+       -  Returns a bit array of supported sound formats.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+

Documentation/linux_tv/media/dvb/audio-get-pts.rst

+.. -*- coding: utf-8; mode: rst -*-
+
+.. _AUDIO_GET_PTS:
+
+AUDIO_GET_PTS
+=============
+
+Description
+-----------
+
+This ioctl is obsolete. Do not use in new drivers. If you need this
+functionality, then please contact the linux-media mailing list
+(`https://linuxtv.org/lists.php <https://linuxtv.org/lists.php>`__).
+
+This ioctl call asks the Audio Device to return the current PTS
+timestamp.
+
+Synopsis
+--------
+
+.. c:function:: int ioctl(int fd, int request = AUDIO_GET_PTS, __u64 *pts)
+
+Arguments
+----------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals AUDIO_GET_PTS for this command.
+
+    -  .. row 3
+
+       -  __u64 \*pts
+
+       -  Returns the 33-bit timestamp as defined in ITU T-REC-H.222.0 /
+	  ISO/IEC 13818-1.
+
+	  The PTS should belong to the currently played frame if possible,
+	  but may also be a value close to it like the PTS of the last
+	  decoded frame or the last PTS extracted by the PES parser.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+

Documentation/linux_tv/media/dvb/audio-get-status.rst

+.. -*- coding: utf-8; mode: rst -*-
+
+.. _AUDIO_GET_STATUS:
+
+AUDIO_GET_STATUS
+================
+
+Description
+-----------
+
+This ioctl call asks the Audio Device to return the current state of the
+Audio Device.
+
+Synopsis
+--------
+
+.. c:function:: int ioctl(int fd, int request = AUDIO_GET_STATUS, struct audio_status *status)
+
+Arguments
+----------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals AUDIO_GET_STATUS for this command.
+
+    -  .. row 3
+
+       -  struct audio_status \*status
+
+       -  Returns the current state of Audio Device.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+

Documentation/linux_tv/media/dvb/audio-pause.rst

+.. -*- coding: utf-8; mode: rst -*-
+
+.. _AUDIO_PAUSE:
+
+AUDIO_PAUSE
+===========
+
+Description
+-----------
+
+This ioctl call suspends the audio stream being played. Decoding and
+playing are paused. It is then possible to restart again decoding and
+playing process of the audio stream using AUDIO_CONTINUE command.
+
+Synopsis
+--------
+
+.. c:function:: int  ioctl(int fd, int request = AUDIO_PAUSE)
+
+Arguments
+----------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals AUDIO_PAUSE for this command.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+

Documentation/linux_tv/media/dvb/audio-play.rst

+.. -*- coding: utf-8; mode: rst -*-
+
+.. _AUDIO_PLAY:
+
+AUDIO_PLAY
+==========
+
+Description
+-----------
+
+This ioctl call asks the Audio Device to start playing an audio stream
+from the selected source.
+
+Synopsis
+--------
+
+.. c:function:: int  ioctl(int fd, int request = AUDIO_PLAY)
+
+Arguments
+----------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals AUDIO_PLAY for this command.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+

Documentation/linux_tv/media/dvb/audio-select-source.rst

+.. -*- coding: utf-8; mode: rst -*-
+
+.. _AUDIO_SELECT_SOURCE:
+
+AUDIO_SELECT_SOURCE
+===================
+
+Description
+-----------
+
+This ioctl call informs the audio device which source shall be used for
+the input data. The possible sources are demux or memory. If
+AUDIO_SOURCE_MEMORY is selected, the data is fed to the Audio Device
+through the write command.
+
+Synopsis
+--------
+
+.. c:function:: int ioctl(int fd, int request = AUDIO_SELECT_SOURCE, audio_stream_source_t source)
+
+Arguments
+----------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals AUDIO_SELECT_SOURCE for this command.
+
+    -  .. row 3
+
+       -  audio_stream_source_t source
+
+       -  Indicates the source that shall be used for the Audio stream.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+

Documentation/linux_tv/media/dvb/audio-set-attributes.rst

+.. -*- coding: utf-8; mode: rst -*-
+
+.. _AUDIO_SET_ATTRIBUTES:
+
+AUDIO_SET_ATTRIBUTES
+====================
+
+Description
+-----------
+
+This ioctl is intended for DVD playback and allows you to set certain
+information about the audio stream.
+
+Synopsis
+--------
+
+.. c:function:: int ioctl(fd, int request = AUDIO_SET_ATTRIBUTES, audio_attributes_t attr )
+
+Arguments
+----------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals AUDIO_SET_ATTRIBUTES for this command.
+
+    -  .. row 3
+
+       -  audio_attributes_t attr
+
+       -  audio attributes according to section ??
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ``EINVAL``
+
+       -  attr is not a valid or supported attribute setting.
+
+
+

Documentation/linux_tv/media/dvb/audio-set-av-sync.rst

+.. -*- coding: utf-8; mode: rst -*-
+
+.. _AUDIO_SET_AV_SYNC:
+
+AUDIO_SET_AV_SYNC
+=================
+
+Description
+-----------
+
+This ioctl call asks the Audio Device to turn ON or OFF A/V
+synchronization.
+
+Synopsis
+--------
+
+.. c:function:: int  ioctl(int fd, int request = AUDIO_SET_AV_SYNC, boolean state)
+
+Arguments
+----------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals AUDIO_AV_SYNC for this command.
+
+    -  .. row 3
+
+       -  boolean state
+
+       -  Tells the DVB subsystem if A/V synchronization shall be ON or OFF.
+
+    -  .. row 4
+
+       -
+       -  TRUE AV-sync ON
+
+    -  .. row 5
+
+       -
+       -  FALSE AV-sync OFF
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+

Documentation/linux_tv/media/dvb/audio-set-bypass-mode.rst

+.. -*- coding: utf-8; mode: rst -*-
+
+.. _AUDIO_SET_BYPASS_MODE:
+
+AUDIO_SET_BYPASS_MODE
+=====================
+
+Description
+-----------
+
+This ioctl call asks the Audio Device to bypass the Audio decoder and
+forward the stream without decoding. This mode shall be used if streams
+that can’t be handled by the DVB system shall be decoded. Dolby
+DigitalTM streams are automatically forwarded by the DVB subsystem if
+the hardware can handle it.
+
+Synopsis
+--------
+
+.. c:function:: int ioctl(int fd, int request = AUDIO_SET_BYPASS_MODE, boolean mode)
+
+Arguments
+----------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals AUDIO_SET_BYPASS_MODE for this command.
+
+    -  .. row 3
+
+       -  boolean mode
+
+       -  Enables or disables the decoding of the current Audio stream in
+	  the DVB subsystem.
+
+    -  .. row 4
+
+       -
+       -  TRUE Bypass is disabled
+
+    -  .. row 5
+
+       -
+       -  FALSE Bypass is enabled
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+

Documentation/linux_tv/media/dvb/audio-set-ext-id.rst

+.. -*- coding: utf-8; mode: rst -*-
+
+.. _AUDIO_SET_EXT_ID:
+
+AUDIO_SET_EXT_ID
+================
+
+Description
+-----------
+
+This ioctl can be used to set the extension id for MPEG streams in DVD
+playback. Only the first 3 bits are recognized.
+
+Synopsis
+--------
+
+.. c:function:: int  ioctl(fd, int request = AUDIO_SET_EXT_ID, int id)
+
+Arguments
+----------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals AUDIO_SET_EXT_ID for this command.
+
+    -  .. row 3
+
+       -  int id
+
+       -  audio sub_stream_id
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ``EINVAL``
+
+       -  id is not a valid id.
+
+
+

Documentation/linux_tv/media/dvb/audio-set-id.rst

+.. -*- coding: utf-8; mode: rst -*-
+
+.. _AUDIO_SET_ID:
+
+AUDIO_SET_ID
+============
+
+Description
+-----------
+
+This ioctl selects which sub-stream is to be decoded if a program or
+system stream is sent to the video device. If no audio stream type is
+set the id has to be in [0xC0,0xDF] for MPEG sound, in [0x80,0x87] for
+AC3 and in [0xA0,0xA7] for LPCM. More specifications may follow for
+other stream types. If the stream type is set the id just specifies the
+substream id of the audio stream and only the first 5 bits are
+recognized.
+
+Synopsis
+--------
+
+.. c:function:: int  ioctl(int fd, int request = AUDIO_SET_ID, int id)
+
+Arguments
+----------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals AUDIO_SET_ID for this command.
+
+    -  .. row 3
+
+       -  int id
+
+       -  audio sub-stream id
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+

Documentation/linux_tv/media/dvb/audio-set-karaoke.rst

+.. -*- coding: utf-8; mode: rst -*-
+
+.. _AUDIO_SET_KARAOKE:
+
+AUDIO_SET_KARAOKE
+=================
+
+Description
+-----------
+
+This ioctl allows one to set the mixer settings for a karaoke DVD.
+
+Synopsis
+--------
+
+.. c:function:: int ioctl(fd, int request = AUDIO_SET_KARAOKE, audio_karaoke_t *karaoke)
+
+Arguments
+----------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals AUDIO_SET_KARAOKE for this command.
+
+    -  .. row 3
+
+       -  audio_karaoke_t \*karaoke
+
+       -  karaoke settings according to section ??.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ``EINVAL``
+
+       -  karaoke is not a valid or supported karaoke setting.

Documentation/linux_tv/media/dvb/audio-set-mixer.rst

+.. -*- coding: utf-8; mode: rst -*-
+
+.. _AUDIO_SET_MIXER:
+
+AUDIO_SET_MIXER
+===============
+
+Description
+-----------
+
+This ioctl lets you adjust the mixer settings of the audio decoder.
+
+Synopsis
+--------
+
+.. c:function:: int ioctl(int fd, int request = AUDIO_SET_MIXER, audio_mixer_t *mix)
+
+Arguments
+----------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals AUDIO_SET_ID for this command.
+
+    -  .. row 3
+
+       -  audio_mixer_t \*mix
+
+       -  mixer settings.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+

Documentation/linux_tv/media/dvb/audio-set-mute.rst

+.. -*- coding: utf-8; mode: rst -*-
+
+.. _AUDIO_SET_MUTE:
+
+AUDIO_SET_MUTE
+==============
+
+Description
+-----------
+
+This ioctl is for DVB devices only. To control a V4L2 decoder use the
+V4L2 :ref:`VIDIOC_DECODER_CMD` with the
+``V4L2_DEC_CMD_START_MUTE_AUDIO`` flag instead.
+
+This ioctl call asks the audio device to mute the stream that is
+currently being played.
+
+Synopsis
+--------
+
+.. c:function:: int  ioctl(int fd, int request = AUDIO_SET_MUTE, boolean state)
+
+Arguments
+----------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals AUDIO_SET_MUTE for this command.
+
+    -  .. row 3
+
+       -  boolean state
+
+       -  Indicates if audio device shall mute or not.
+
+    -  .. row 4
+
+       -
+       -  TRUE Audio Mute
+
+    -  .. row 5
+
+       -
+       -  FALSE Audio Un-mute
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+

Documentation/linux_tv/media/dvb/audio-set-streamtype.rst

+.. -*- coding: utf-8; mode: rst -*-
+
+.. _AUDIO_SET_STREAMTYPE:
+
+AUDIO_SET_STREAMTYPE
+====================
+
+Description
+-----------
+
+This ioctl tells the driver which kind of audio stream to expect. This
+is useful if the stream offers several audio sub-streams like LPCM and
+AC3.
+
+Synopsis
+--------
+
+.. c:function:: int  ioctl(fd, int request = AUDIO_SET_STREAMTYPE, int type)
+
+Arguments
+----------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals AUDIO_SET_STREAMTYPE for this command.
+
+    -  .. row 3
+
+       -  int type
+
+       -  stream type
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ``EINVAL``
+
+       -  type is not a valid or supported stream type.
+
+
+

Documentation/linux_tv/media/dvb/audio-stop.rst

+.. -*- coding: utf-8; mode: rst -*-
+
+.. _AUDIO_STOP:
+
+AUDIO_STOP
+==========
+
+Description
+-----------
+
+This ioctl call asks the Audio Device to stop playing the current
+stream.
+
+Synopsis
+--------
+
+.. c:function:: int ioctl(int fd, int request = AUDIO_STOP)
+
+Arguments
+----------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals AUDIO_STOP for this command.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+

Documentation/linux_tv/media/dvb/ca-fclose.rst

+.. -*- coding: utf-8; mode: rst -*-
+
+.. _ca_fclose:
+
+DVB CA close()
+==============
+
+Description
+-----------
+
+This system call closes a previously opened audio device.
+
+Synopsis
+--------
+
+.. cpp:function:: int  close(int fd)
+
+Arguments
+----------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+
+Return Value
+------------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ``EBADF``
+
+       -  fd is not a valid open file descriptor.
+
+
+

Documentation/linux_tv/media/dvb/ca-fopen.rst

+.. -*- coding: utf-8; mode: rst -*-
+
+.. _ca_fopen:
+
+DVB CA open()
+=============
+
+Description
+-----------
+
+This system call opens a named ca device (e.g. /dev/ost/ca) for
+subsequent use.
+
+When an open() call has succeeded, the device will be ready for use. The
+significance of blocking or non-blocking mode is described in the
+documentation for functions where there is a difference. It does not
+affect the semantics of the open() call itself. A device opened in
+blocking mode can later be put into non-blocking mode (and vice versa)
+using the F_SETFL command of the fcntl system call. This is a standard
+system call, documented in the Linux manual page for fcntl. Only one
+user can open the CA Device in O_RDWR mode. All other attempts to open
+the device in this mode will fail, and an error code will be returned.
+
+Synopsis
+--------
+
+.. cpp:function:: int  open(const char *deviceName, int flags)
+
+Arguments
+----------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  const char \*deviceName
+
+       -  Name of specific video device.
+
+    -  .. row 2
+
+       -  int flags
+
+       -  A bit-wise OR of the following flags:
+
+    -  .. row 3
+
+       -
+       -  O_RDONLY read-only access
+
+    -  .. row 4
+
+       -
+       -  O_RDWR read/write access
+
+    -  .. row 5
+
+       -
+       -  O_NONBLOCK open in non-blocking mode
+
+    -  .. row 6
+
+       -
+       -  (blocking mode is the default)
+
+
+Return Value
+------------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ``ENODEV``
+
+       -  Device driver not loaded/available.
+
+    -  .. row 2
+
+       -  ``EINTERNAL``
+
+       -  Internal error.
+
+    -  .. row 3
+
+       -  ``EBUSY``
+
+       -  Device or resource busy.
+
+    -  .. row 4
+
+       -  ``EINVAL``
+
+       -  Invalid argument.
+
+
+

Documentation/linux_tv/media/dvb/ca-get-cap.rst

+.. -*- coding: utf-8; mode: rst -*-
+
+.. _CA_GET_CAP:
+
+CA_GET_CAP
+==========
+
+Description
+-----------
+
+This ioctl is undocumented. Documentation is welcome.
+
+Synopsis
+--------
+
+.. cpp:function:: int  ioctl(fd, int request = CA_GET_CAP, ca_caps_t *)
+
+Arguments
+----------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals CA_GET_CAP for this command.
+
+    -  .. row 3
+
+       -  ca_caps_t *
+
+       -  Undocumented.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+

Documentation/linux_tv/media/dvb/ca-get-descr-info.rst

+.. -*- coding: utf-8; mode: rst -*-
+
+.. _CA_GET_DESCR_INFO:
+
+CA_GET_DESCR_INFO
+=================
+
+Description
+-----------
+
+This ioctl is undocumented. Documentation is welcome.
+
+Synopsis
+--------
+
+.. cpp:function:: int  ioctl(fd, int request = CA_GET_DESCR_INFO, ca_descr_info_t *)
+
+Arguments
+----------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals CA_GET_DESCR_INFO for this command.
+
+    -  .. row 3
+
+       -  ca_descr_info_t \*
+
+       -  Undocumented.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+

Documentation/linux_tv/media/dvb/ca-get-msg.rst

+.. -*- coding: utf-8; mode: rst -*-
+
+.. _CA_GET_MSG:
+
+CA_GET_MSG
+==========
+
+Description
+-----------
+
+This ioctl is undocumented. Documentation is welcome.
+
+Synopsis
+--------
+
+.. cpp:function:: int  ioctl(fd, int request = CA_GET_MSG, ca_msg_t *)
+
+Arguments
+----------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals CA_GET_MSG for this command.
+
+    -  .. row 3
+
+       -  ca_msg_t \*
+
+       -  Undocumented.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+

Documentation/linux_tv/media/dvb/ca-get-slot-info.rst

+.. -*- coding: utf-8; mode: rst -*-
+
+.. _CA_GET_SLOT_INFO:
+
+CA_GET_SLOT_INFO
+================
+
+Description
+-----------
+
+This ioctl is undocumented. Documentation is welcome.
+
+Synopsis
+--------
+
+.. cpp:function:: int  ioctl(fd, int request = CA_GET_SLOT_INFO, ca_slot_info_t *)
+
+Arguments
+----------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals CA_GET_SLOT_INFO for this command.
+
+    -  .. row 3
+
+       -  ca_slot_info_t \*
+
+       -  Undocumented.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+

Documentation/linux_tv/media/dvb/ca-reset.rst

+.. -*- coding: utf-8; mode: rst -*-
+
+.. _CA_RESET:
+
+CA_RESET
+========
+
+Description
+-----------
+
+This ioctl is undocumented. Documentation is welcome.
+
+Synopsis
+--------
+
+.. cpp:function:: int  ioctl(fd, int request = CA_RESET)
+
+Arguments
+----------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals CA_RESET for this command.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+

Documentation/linux_tv/media/dvb/ca-send-msg.rst

+.. -*- coding: utf-8; mode: rst -*-
+
+.. _CA_SEND_MSG:
+
+CA_SEND_MSG
+===========
+
+Description
+-----------
+
+This ioctl is undocumented. Documentation is welcome.
+
+Synopsis
+--------
+
+.. cpp:function:: int  ioctl(fd, int request = CA_SEND_MSG, ca_msg_t *)
+
+Arguments
+----------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals CA_SEND_MSG for this command.
+
+    -  .. row 3
+
+       -  ca_msg_t \*
+
+       -  Undocumented.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+

Documentation/linux_tv/media/dvb/ca-set-descr.rst

+.. -*- coding: utf-8; mode: rst -*-
+
+.. _CA_SET_DESCR:
+
+CA_SET_DESCR
+============
+
+Description
+-----------
+
+This ioctl is undocumented. Documentation is welcome.
+
+Synopsis
+--------
+
+.. cpp:function:: int  ioctl(fd, int request = CA_SET_DESCR, ca_descr_t *)
+
+Arguments
+----------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals CA_SET_DESCR for this command.
+
+    -  .. row 3
+
+       -  ca_descr_t \*
+
+       -  Undocumented.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+

Documentation/linux_tv/media/dvb/ca-set-pid.rst

+.. -*- coding: utf-8; mode: rst -*-
+
+.. _CA_SET_PID:
+
+CA_SET_PID
+==========
+
+Description
+-----------
+
+This ioctl is undocumented. Documentation is welcome.
+
+Synopsis
+--------
+
+.. cpp:function:: int  ioctl(fd, int request = CA_SET_PID, ca_pid_t *)
+
+Arguments
+----------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals CA_SET_PID for this command.
+
+    -  .. row 3
+
+       -  ca_pid_t \*
+
+       -  Undocumented.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.

Documentation/linux_tv/media/dvb/ca_function_calls.rst

@@ -6,567 +6,16 @@
 CA Function Calls
 *****************
 
-
-.. _ca_fopen:
-
-DVB CA open()
-=============
-
-Description
------------
-
-This system call opens a named ca device (e.g. /dev/ost/ca) for
-subsequent use.
-
-When an open() call has succeeded, the device will be ready for use. The
-significance of blocking or non-blocking mode is described in the
-documentation for functions where there is a difference. It does not
-affect the semantics of the open() call itself. A device opened in
-blocking mode can later be put into non-blocking mode (and vice versa)
-using the F_SETFL command of the fcntl system call. This is a standard
-system call, documented in the Linux manual page for fcntl. Only one
-user can open the CA Device in O_RDWR mode. All other attempts to open
-the device in this mode will fail, and an error code will be returned.
-
-Synopsis
---------
-
-.. cpp:function:: int  open(const char *deviceName, int flags)
-
-Arguments
-----------
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  const char \*deviceName
-
-       -  Name of specific video device.
-
-    -  .. row 2
-
-       -  int flags
-
-       -  A bit-wise OR of the following flags:
-
-    -  .. row 3
-
-       -
-       -  O_RDONLY read-only access
-
-    -  .. row 4
-
-       -
-       -  O_RDWR read/write access
-
-    -  .. row 5
-
-       -
-       -  O_NONBLOCK open in non-blocking mode
-
-    -  .. row 6
-
-       -
-       -  (blocking mode is the default)
-
-
-Return Value
-------------
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  ``ENODEV``
-
-       -  Device driver not loaded/available.
-
-    -  .. row 2
-
-       -  ``EINTERNAL``
-
-       -  Internal error.
-
-    -  .. row 3
-
-       -  ``EBUSY``
-
-       -  Device or resource busy.
-
-    -  .. row 4
-
-       -  ``EINVAL``
-
-       -  Invalid argument.
-
-
-
-.. _ca_fclose:
-
-DVB CA close()
-==============
-
-Description
------------
-
-This system call closes a previously opened audio device.
-
-Synopsis
---------
-
-.. cpp:function:: int  close(int fd)
-
-Arguments
-----------
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  int fd
-
-       -  File descriptor returned by a previous call to open().
-
-
-Return Value
-------------
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  ``EBADF``
-
-       -  fd is not a valid open file descriptor.
-
-
-
-.. _CA_RESET:
-
-CA_RESET
-========
-
-Description
------------
-
-This ioctl is undocumented. Documentation is welcome.
-
-Synopsis
---------
-
-.. cpp:function:: int  ioctl(fd, int request = CA_RESET)
-
-Arguments
-----------
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  int fd
-
-       -  File descriptor returned by a previous call to open().
-
-    -  .. row 2
-
-       -  int request
-
-       -  Equals CA_RESET for this command.
-
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-
-.. _CA_GET_CAP:
-
-CA_GET_CAP
-==========
-
-Description
------------
-
-This ioctl is undocumented. Documentation is welcome.
-
-Synopsis
---------
-
-.. cpp:function:: int  ioctl(fd, int request = CA_GET_CAP, ca_caps_t *)
-
-Arguments
-----------
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  int fd
-
-       -  File descriptor returned by a previous call to open().
-
-    -  .. row 2
-
-       -  int request
-
-       -  Equals CA_GET_CAP for this command.
-
-    -  .. row 3
-
-       -  ca_caps_t *
-
-       -  Undocumented.
-
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-
-.. _CA_GET_SLOT_INFO:
-
-CA_GET_SLOT_INFO
-================
-
-Description
------------
-
-This ioctl is undocumented. Documentation is welcome.
-
-Synopsis
---------
-
-.. cpp:function:: int  ioctl(fd, int request = CA_GET_SLOT_INFO, ca_slot_info_t *)
-
-Arguments
-----------
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  int fd
-
-       -  File descriptor returned by a previous call to open().
-
-    -  .. row 2
-
-       -  int request
-
-       -  Equals CA_GET_SLOT_INFO for this command.
-
-    -  .. row 3
-
-       -  ca_slot_info_t \*
-
-       -  Undocumented.
-
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-
-.. _CA_GET_DESCR_INFO:
-
-CA_GET_DESCR_INFO
-=================
-
-Description
------------
-
-This ioctl is undocumented. Documentation is welcome.
-
-Synopsis
---------
-
-.. cpp:function:: int  ioctl(fd, int request = CA_GET_DESCR_INFO, ca_descr_info_t *)
-
-Arguments
-----------
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  int fd
-
-       -  File descriptor returned by a previous call to open().
-
-    -  .. row 2
-
-       -  int request
-
-       -  Equals CA_GET_DESCR_INFO for this command.
-
-    -  .. row 3
-
-       -  ca_descr_info_t \*
-
-       -  Undocumented.
-
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-
-.. _CA_GET_MSG:
-
-CA_GET_MSG
-==========
-
-Description
------------
-
-This ioctl is undocumented. Documentation is welcome.
-
-Synopsis
---------
-
-.. cpp:function:: int  ioctl(fd, int request = CA_GET_MSG, ca_msg_t *)
-
-Arguments
-----------
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  int fd
-
-       -  File descriptor returned by a previous call to open().
-
-    -  .. row 2
-
-       -  int request
-
-       -  Equals CA_GET_MSG for this command.
-
-    -  .. row 3
-
-       -  ca_msg_t \*
-
-       -  Undocumented.
-
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-
-.. _CA_SEND_MSG:
-
-CA_SEND_MSG
-===========
-
-Description
------------
-
-This ioctl is undocumented. Documentation is welcome.
-
-Synopsis
---------
-
-.. cpp:function:: int  ioctl(fd, int request = CA_SEND_MSG, ca_msg_t *)
-
-Arguments
-----------
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  int fd
-
-       -  File descriptor returned by a previous call to open().
-
-    -  .. row 2
-
-       -  int request
-
-       -  Equals CA_SEND_MSG for this command.
-
-    -  .. row 3
-
-       -  ca_msg_t \*
-
-       -  Undocumented.
-
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-
-.. _CA_SET_DESCR:
-
-CA_SET_DESCR
-============
-
-Description
------------
-
-This ioctl is undocumented. Documentation is welcome.
-
-Synopsis
---------
-
-.. cpp:function:: int  ioctl(fd, int request = CA_SET_DESCR, ca_descr_t *)
-
-Arguments
-----------
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  int fd
-
-       -  File descriptor returned by a previous call to open().
-
-    -  .. row 2
-
-       -  int request
-
-       -  Equals CA_SET_DESCR for this command.
-
-    -  .. row 3
-
-       -  ca_descr_t \*
-
-       -  Undocumented.
-
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
-
-
-.. _CA_SET_PID:
-
-CA_SET_PID
-==========
-
-Description
------------
-
-This ioctl is undocumented. Documentation is welcome.
-
-Synopsis
---------
-
-.. cpp:function:: int  ioctl(fd, int request = CA_SET_PID, ca_pid_t *)
-
-Arguments
-----------
-
-
-
-.. flat-table::
-    :header-rows:  0
-    :stub-columns: 0
-
-
-    -  .. row 1
-
-       -  int fd
-
-       -  File descriptor returned by a previous call to open().
-
-    -  .. row 2
-
-       -  int request
-
-       -  Equals CA_SET_PID for this command.
-
-    -  .. row 3
-
-       -  ca_pid_t \*
-
-       -  Undocumented.
-
-
-Return Value
-------------
-
-On success 0 is returned, on error -1 and the ``errno`` variable is set
-appropriately. The generic error codes are described at the
-:ref:`Generic Error Codes <gen-errors>` chapter.
+.. toctree::
+    :maxdepth: 1
+
+    ca-fopen
+    ca-fclose
+    ca-reset
+    ca-get-cap
+    ca-get-slot-info
+    ca-get-descr-info
+    ca-get-msg
+    ca-send-msg
+    ca-set-descr
+    ca-set-pid

Documentation/linux_tv/media/dvb/dmx-add-pid.rst

+.. -*- coding: utf-8; mode: rst -*-
+
+.. _DMX_ADD_PID:
+
+DMX_ADD_PID
+===========
+
+Description
+-----------
+
+This ioctl call allows to add multiple PIDs to a transport stream filter
+previously set up with DMX_SET_PES_FILTER and output equal to
+DMX_OUT_TSDEMUX_TAP.
+
+Synopsis
+--------
+
+.. c:function:: int ioctl(fd, int request = DMX_ADD_PID, __u16 *)
+
+Arguments
+----------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals DMX_ADD_PID for this command.
+
+    -  .. row 3
+
+       -  __u16 *
+
+       -  PID number to be filtered.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+

Documentation/linux_tv/media/dvb/dmx-fclose.rst

+.. -*- coding: utf-8; mode: rst -*-
+
+.. _dmx_fclose:
+
+DVB demux close()
+=================
+
+Description
+-----------
+
+This system call deactivates and deallocates a filter that was
+previously allocated via the open() call.
+
+Synopsis
+--------
+
+.. c:function:: int close(int fd)
+
+Arguments
+----------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+
+Return Value
+------------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ``EBADF``
+
+       -  fd is not a valid open file descriptor.
+
+
+

Documentation/linux_tv/media/dvb/dmx-fopen.rst

+.. -*- coding: utf-8; mode: rst -*-
+
+.. _dmx_fopen:
+
+DVB demux open()
+================
+
+Description
+-----------
+
+This system call, used with a device name of /dev/dvb/adapter0/demux0,
+allocates a new filter and returns a handle which can be used for
+subsequent control of that filter. This call has to be made for each
+filter to be used, i.e. every returned file descriptor is a reference to
+a single filter. /dev/dvb/adapter0/dvr0 is a logical device to be used
+for retrieving Transport Streams for digital video recording. When
+reading from this device a transport stream containing the packets from
+all PES filters set in the corresponding demux device
+(/dev/dvb/adapter0/demux0) having the output set to DMX_OUT_TS_TAP. A
+recorded Transport Stream is replayed by writing to this device.
+
+The significance of blocking or non-blocking mode is described in the
+documentation for functions where there is a difference. It does not
+affect the semantics of the open() call itself. A device opened in
+blocking mode can later be put into non-blocking mode (and vice versa)
+using the F_SETFL command of the fcntl system call.
+
+Synopsis
+--------
+
+.. c:function:: int open(const char *deviceName, int flags)
+
+Arguments
+----------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  const char \*deviceName
+
+       -  Name of demux device.
+
+    -  .. row 2
+
+       -  int flags
+
+       -  A bit-wise OR of the following flags:
+
+    -  .. row 3
+
+       -
+       -  O_RDWR read/write access
+
+    -  .. row 4
+
+       -
+       -  O_NONBLOCK open in non-blocking mode
+
+    -  .. row 5
+
+       -
+       -  (blocking mode is the default)
+
+
+Return Value
+------------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ``ENODEV``
+
+       -  Device driver not loaded/available.
+
+    -  .. row 2
+
+       -  ``EINVAL``
+
+       -  Invalid argument.
+
+    -  .. row 3
+
+       -  ``EMFILE``
+
+       -  “Too many open files”, i.e. no more filters available.
+
+    -  .. row 4
+
+       -  ``ENOMEM``
+
+       -  The driver failed to allocate enough memory.
+
+
+

Documentation/linux_tv/media/dvb/dmx-fread.rst

+.. -*- coding: utf-8; mode: rst -*-
+
+.. _dmx_fread:
+
+DVB demux read()
+================
+
+Description
+-----------
+
+This system call returns filtered data, which might be section or PES
+data. The filtered data is transferred from the driver’s internal
+circular buffer to buf. The maximum amount of data to be transferred is
+implied by count.
+
+Synopsis
+--------
+
+.. c:function:: size_t read(int fd, void *buf, size_t count)
+
+Arguments
+----------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  void \*buf
+
+       -  Pointer to the buffer to be used for returned filtered data.
+
+    -  .. row 3
+
+       -  size_t count
+
+       -  Size of buf.
+
+
+Return Value
+------------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ``EWOULDBLOCK``
+
+       -  No data to return and O_NONBLOCK was specified.
+
+    -  .. row 2
+
+       -  ``EBADF``
+
+       -  fd is not a valid open file descriptor.
+
+    -  .. row 3
+
+       -  ``ECRC``
+
+       -  Last section had a CRC error - no data returned. The buffer is
+	  flushed.
+
+    -  .. row 4
+
+       -  ``EOVERFLOW``
+
+       -
+
+    -  .. row 5
+
+       -
+       -  The filtered data was not read from the buffer in due time,
+	  resulting in non-read data being lost. The buffer is flushed.
+
+    -  .. row 6
+
+       -  ``ETIMEDOUT``
+
+       -  The section was not loaded within the stated timeout period. See
+	  ioctl DMX_SET_FILTER for how to set a timeout.
+
+    -  .. row 7
+
+       -  ``EFAULT``
+
+       -  The driver failed to write to the callers buffer due to an invalid
+	  \*buf pointer.
+
+
+

Documentation/linux_tv/media/dvb/dmx-fwrite.rst

+.. -*- coding: utf-8; mode: rst -*-
+
+.. _dmx_fwrite:
+
+DVB demux write()
+=================
+
+Description
+-----------
+
+This system call is only provided by the logical device
+/dev/dvb/adapter0/dvr0, associated with the physical demux device that
+provides the actual DVR functionality. It is used for replay of a
+digitally recorded Transport Stream. Matching filters have to be defined
+in the corresponding physical demux device, /dev/dvb/adapter0/demux0.
+The amount of data to be transferred is implied by count.
+
+Synopsis
+--------
+
+.. c:function:: ssize_t write(int fd, const void *buf, size_t count)
+
+Arguments
+----------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  void \*buf
+
+       -  Pointer to the buffer containing the Transport Stream.
+
+    -  .. row 3
+
+       -  size_t count
+
+       -  Size of buf.
+
+
+Return Value
+------------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ``EWOULDBLOCK``
+
+       -  No data was written. This might happen if O_NONBLOCK was
+	  specified and there is no more buffer space available (if
+	  O_NONBLOCK is not specified the function will block until buffer
+	  space is available).
+
+    -  .. row 2
+
+       -  ``EBUSY``
+
+       -  This error code indicates that there are conflicting requests. The
+	  corresponding demux device is setup to receive data from the
+	  front- end. Make sure that these filters are stopped and that the
+	  filters with input set to DMX_IN_DVR are started.
+
+    -  .. row 3
+
+       -  ``EBADF``
+
+       -  fd is not a valid open file descriptor.
+
+
+

Documentation/linux_tv/media/dvb/dmx-get-caps.rst

+.. -*- coding: utf-8; mode: rst -*-
+
+.. _DMX_GET_CAPS:
+
+DMX_GET_CAPS
+============
+
+Description
+-----------
+
+This ioctl is undocumented. Documentation is welcome.
+
+Synopsis
+--------
+
+.. c:function:: int ioctl(fd, int request = DMX_GET_CAPS, dmx_caps_t *)
+
+Arguments
+----------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals DMX_GET_CAPS for this command.
+
+    -  .. row 3
+
+       -  dmx_caps_t *
+
+       -  Undocumented.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+

Documentation/linux_tv/media/dvb/dmx-get-event.rst

+.. -*- coding: utf-8; mode: rst -*-
+
+.. _DMX_GET_EVENT:
+
+DMX_GET_EVENT
+=============
+
+Description
+-----------
+
+This ioctl call returns an event if available. If an event is not
+available, the behavior depends on whether the device is in blocking or
+non-blocking mode. In the latter case, the call fails immediately with
+errno set to ``EWOULDBLOCK``. In the former case, the call blocks until an
+event becomes available.
+
+Synopsis
+--------
+
+.. c:function:: int ioctl( int fd, int request = DMX_GET_EVENT, struct dmx_event *ev)
+
+Arguments
+----------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals DMX_GET_EVENT for this command.
+
+    -  .. row 3
+
+       -  struct dmx_event \*ev
+
+       -  Pointer to the location where the event is to be stored.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ``EWOULDBLOCK``
+
+       -  There is no event pending, and the device is in non-blocking mode.
+
+
+

Documentation/linux_tv/media/dvb/dmx-get-pes-pids.rst

+.. -*- coding: utf-8; mode: rst -*-
+
+.. _DMX_GET_PES_PIDS:
+
+DMX_GET_PES_PIDS
+================
+
+Description
+-----------
+
+This ioctl is undocumented. Documentation is welcome.
+
+Synopsis
+--------
+
+.. c:function:: int ioctl(fd, int request = DMX_GET_PES_PIDS, __u16[5])
+
+Arguments
+----------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals DMX_GET_PES_PIDS for this command.
+
+    -  .. row 3
+
+       -  __u16[5]
+
+       -  Undocumented.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+

Documentation/linux_tv/media/dvb/dmx-get-stc.rst

+.. -*- coding: utf-8; mode: rst -*-
+
+.. _DMX_GET_STC:
+
+DMX_GET_STC
+===========
+
+Description
+-----------
+
+This ioctl call returns the current value of the system time counter
+(which is driven by a PES filter of type DMX_PES_PCR). Some hardware
+supports more than one STC, so you must specify which one by setting the
+num field of stc before the ioctl (range 0...n). The result is returned
+in form of a ratio with a 64 bit numerator and a 32 bit denominator, so
+the real 90kHz STC value is stc->stc / stc->base .
+
+Synopsis
+--------
+
+.. c:function:: int ioctl( int fd, int request = DMX_GET_STC, struct dmx_stc *stc)
+
+Arguments
+----------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals DMX_GET_STC for this command.
+
+    -  .. row 3
+
+       -  struct dmx_stc \*stc
+
+       -  Pointer to the location where the stc is to be stored.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ``EINVAL``
+
+       -  Invalid stc number.
+
+
+

Documentation/linux_tv/media/dvb/dmx-remove-pid.rst

+.. -*- coding: utf-8; mode: rst -*-
+
+.. _DMX_REMOVE_PID:
+
+DMX_REMOVE_PID
+==============
+
+Description
+-----------
+
+This ioctl call allows to remove a PID when multiple PIDs are set on a
+transport stream filter, e. g. a filter previously set up with output
+equal to DMX_OUT_TSDEMUX_TAP, created via either
+DMX_SET_PES_FILTER or DMX_ADD_PID.
+
+Synopsis
+--------
+
+.. c:function:: int ioctl(fd, int request = DMX_REMOVE_PID, __u16 *)
+
+Arguments
+----------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals DMX_REMOVE_PID for this command.
+
+    -  .. row 3
+
+       -  __u16 *
+
+       -  PID of the PES filter to be removed.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.

Documentation/linux_tv/media/dvb/dmx-set-buffer-size.rst

+.. -*- coding: utf-8; mode: rst -*-
+
+.. _DMX_SET_BUFFER_SIZE:
+
+DMX_SET_BUFFER_SIZE
+===================
+
+Description
+-----------
+
+This ioctl call is used to set the size of the circular buffer used for
+filtered data. The default size is two maximum sized sections, i.e. if
+this function is not called a buffer size of 2 \* 4096 bytes will be
+used.
+
+Synopsis
+--------
+
+.. c:function:: int ioctl( int fd, int request = DMX_SET_BUFFER_SIZE, unsigned long size)
+
+Arguments
+----------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals DMX_SET_BUFFER_SIZE for this command.
+
+    -  .. row 3
+
+       -  unsigned long size
+
+       -  Size of circular buffer.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+

Documentation/linux_tv/media/dvb/dmx-set-filter.rst

+.. -*- coding: utf-8; mode: rst -*-
+
+.. _DMX_SET_FILTER:
+
+DMX_SET_FILTER
+==============
+
+Description
+-----------
+
+This ioctl call sets up a filter according to the filter and mask
+parameters provided. A timeout may be defined stating number of seconds
+to wait for a section to be loaded. A value of 0 means that no timeout
+should be applied. Finally there is a flag field where it is possible to
+state whether a section should be CRC-checked, whether the filter should
+be a ”one-shot” filter, i.e. if the filtering operation should be
+stopped after the first section is received, and whether the filtering
+operation should be started immediately (without waiting for a
+DMX_START ioctl call). If a filter was previously set-up, this filter
+will be canceled, and the receive buffer will be flushed.
+
+Synopsis
+--------
+
+.. c:function:: int ioctl( int fd, int request = DMX_SET_FILTER, struct dmx_sct_filter_params *params)
+
+Arguments
+----------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals DMX_SET_FILTER for this command.
+
+    -  .. row 3
+
+       -  struct dmx_sct_filter_params \*params
+
+       -  Pointer to structure containing filter parameters.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+

Documentation/linux_tv/media/dvb/dmx-set-pes-filter.rst

+.. -*- coding: utf-8; mode: rst -*-
+
+.. _DMX_SET_PES_FILTER:
+
+DMX_SET_PES_FILTER
+==================
+
+Description
+-----------
+
+This ioctl call sets up a PES filter according to the parameters
+provided. By a PES filter is meant a filter that is based just on the
+packet identifier (PID), i.e. no PES header or payload filtering
+capability is supported.
+
+Synopsis
+--------
+
+.. c:function:: int ioctl( int fd, int request = DMX_SET_PES_FILTER, struct dmx_pes_filter_params *params)
+
+Arguments
+----------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals DMX_SET_PES_FILTER for this command.
+
+    -  .. row 3
+
+       -  struct dmx_pes_filter_params \*params
+
+       -  Pointer to structure containing filter parameters.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  ``EBUSY``
+
+       -  This error code indicates that there are conflicting requests.
+	  There are active filters filtering data from another input source.
+	  Make sure that these filters are stopped before starting this
+	  filter.
+
+
+

Documentation/linux_tv/media/dvb/dmx-set-source.rst

+.. -*- coding: utf-8; mode: rst -*-
+
+.. _DMX_SET_SOURCE:
+
+DMX_SET_SOURCE
+==============
+
+Description
+-----------
+
+This ioctl is undocumented. Documentation is welcome.
+
+Synopsis
+--------
+
+.. c:function:: int ioctl(fd, int request = DMX_SET_SOURCE, dmx_source_t *)
+
+Arguments
+----------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals DMX_SET_SOURCE for this command.
+
+    -  .. row 3
+
+       -  dmx_source_t *
+
+       -  Undocumented.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+

Documentation/linux_tv/media/dvb/dmx-stop.rst

+.. -*- coding: utf-8; mode: rst -*-
+
+.. _DMX_STOP:
+
+DMX_STOP
+========
+
+Description
+-----------
+
+This ioctl call is used to stop the actual filtering operation defined
+via the ioctl calls DMX_SET_FILTER or DMX_SET_PES_FILTER and
+started via the DMX_START command.
+
+Synopsis
+--------
+
+.. c:function:: int ioctl( int fd, int request = DMX_STOP)
+
+Arguments
+----------
+
+
+
+.. flat-table::
+    :header-rows:  0
+    :stub-columns: 0
+
+
+    -  .. row 1
+
+       -  int fd
+
+       -  File descriptor returned by a previous call to open().
+
+    -  .. row 2
+
+       -  int request
+
+       -  Equals DMX_STOP for this command.
+
+
+Return Value
+------------
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
+
+