Commit 49693280 authored by Mitchell Blank Jr's avatar Mitchell Blank Jr Committed by David S. Miller

[ATM]: [lanai] kill lanai_ioctl() which just contains some old debugging code

Signed-off-by: default avatarMitchell Blank Jr <mitch@sfgoth.com>
Signed-off-by: default avatarChas Williams <chas@cmf.nrl.navy.mil>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 5045b6d3
...@@ -39,7 +39,7 @@ ...@@ -39,7 +39,7 @@
* o lanai_change_qos() isn't written yet * o lanai_change_qos() isn't written yet
* *
* o There aren't any ioctl's yet -- I'd like to eventually support * o There aren't any ioctl's yet -- I'd like to eventually support
* setting loopback and LED modes that way. (see lanai_ioctl) * setting loopback and LED modes that way.
* *
* o If the segmentation engine or DMA gets shut down we should restart * o If the segmentation engine or DMA gets shut down we should restart
* card as per section 17.0i. (see lanai_reset) * card as per section 17.0i. (see lanai_reset)
...@@ -2435,93 +2435,6 @@ static int lanai_open(struct atm_vcc *atmvcc) ...@@ -2435,93 +2435,6 @@ static int lanai_open(struct atm_vcc *atmvcc)
return result; return result;
} }
#if 0
/* ioctl operations for card */
/* NOTE: these are all DEBUGGING ONLY currently */
static int lanai_ioctl(struct atm_dev *atmdev, unsigned int cmd, void __user *arg)
{
int result = 0;
struct lanai_dev *lanai = (struct lanai_dev *) atmdev->dev_data;
switch(cmd) {
case 2106275:
shutdown_atm_dev(atmdev);
return 0;
case 2200000: {
unsigned long flags;
spin_lock_irqsave(&lanai->servicelock, flags);
run_service(lanai);
spin_unlock_irqrestore(&lanai->servicelock, flags);
return 0; }
case 2200002:
get_statistics(lanai);
return 0;
case 2200003: {
unsigned int i;
for (i = 0; i <= 0x5C ; i += 4) {
if (i==0x48) /* Write-only butt reg */
continue;
printk(KERN_CRIT DEV_LABEL " 0x%02X: "
"0x%08X\n", i,
(unsigned int) readl(lanai->base + i));
barrier(); mb();
pcistatus_check(lanai, 0);
barrier(); mb();
}
return 0; }
case 2200004: {
u8 b;
u16 w;
u32 dw;
struct pci_dev *pci = lanai->pci;
(void) pci_read_config_word(pci, PCI_VENDOR_ID, &w);
DPRINTK("vendor = 0x%X\n", (unsigned int) w);
(void) pci_read_config_word(pci, PCI_DEVICE_ID, &w);
DPRINTK("device = 0x%X\n", (unsigned int) w);
(void) pci_read_config_word(pci, PCI_COMMAND, &w);
DPRINTK("command = 0x%X\n", (unsigned int) w);
(void) pci_read_config_word(pci, PCI_STATUS, &w);
DPRINTK("status = 0x%X\n", (unsigned int) w);
(void) pci_read_config_dword(pci,
PCI_CLASS_REVISION, &dw);
DPRINTK("class/revision = 0x%X\n", (unsigned int) dw);
(void) pci_read_config_byte(pci,
PCI_CACHE_LINE_SIZE, &b);
DPRINTK("cache line size = 0x%X\n", (unsigned int) b);
(void) pci_read_config_byte(pci, PCI_LATENCY_TIMER, &b);
DPRINTK("latency = %d (0x%X)\n",
(int) b, (unsigned int) b);
(void) pci_read_config_byte(pci, PCI_HEADER_TYPE, &b);
DPRINTK("header type = 0x%X\n", (unsigned int) b);
(void) pci_read_config_byte(pci, PCI_BIST, &b);
DPRINTK("bist = 0x%X\n", (unsigned int) b);
/* skipping a few here */
(void) pci_read_config_byte(pci,
PCI_INTERRUPT_LINE, &b);
DPRINTK("pci_int_line = 0x%X\n", (unsigned int) b);
(void) pci_read_config_byte(pci,
PCI_INTERRUPT_PIN, &b);
DPRINTK("pci_int_pin = 0x%X\n", (unsigned int) b);
(void) pci_read_config_byte(pci, PCI_MIN_GNT, &b);
DPRINTK("min_gnt = 0x%X\n", (unsigned int) b);
(void) pci_read_config_byte(pci, PCI_MAX_LAT, &b);
DPRINTK("max_lat = 0x%X\n", (unsigned int) b); }
return 0;
#ifdef USE_POWERDOWN
case 2200005:
DPRINTK("Coming out of powerdown\n");
lanai->conf1 &= ~CONFIG1_POWERDOWN;
conf1_write(lanai);
return 0;
#endif
default:
result = -ENOIOCTLCMD;
}
return result;
}
#else /* !0 */
#define lanai_ioctl NULL
#endif /* 0 */
static int lanai_send(struct atm_vcc *atmvcc, struct sk_buff *skb) static int lanai_send(struct atm_vcc *atmvcc, struct sk_buff *skb)
{ {
struct lanai_vcc *lvcc = (struct lanai_vcc *) atmvcc->dev_data; struct lanai_vcc *lvcc = (struct lanai_vcc *) atmvcc->dev_data;
...@@ -2679,7 +2592,6 @@ static const struct atmdev_ops ops = { ...@@ -2679,7 +2592,6 @@ static const struct atmdev_ops ops = {
.dev_close = lanai_dev_close, .dev_close = lanai_dev_close,
.open = lanai_open, .open = lanai_open,
.close = lanai_close, .close = lanai_close,
.ioctl = lanai_ioctl,
.getsockopt = NULL, .getsockopt = NULL,
.setsockopt = NULL, .setsockopt = NULL,
.send = lanai_send, .send = lanai_send,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment