bnx2x: Fix potential incorrect link speed provision

Fix possible incorrect link speed provision following rapid link speed change.
Clear link speed mask after each link change, and not only after link down.
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Barak Witkowski <barak@broadcom.com>
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c

@@ -137,7 +137,16 @@
 #define LINK_20GTFD		LINK_STATUS_SPEED_AND_DUPLEX_20GTFD
 #define LINK_20GXFD		LINK_STATUS_SPEED_AND_DUPLEX_20GXFD
 
-
+#define LINK_UPDATE_MASK \
+			(LINK_STATUS_SPEED_AND_DUPLEX_MASK | \
+			 LINK_STATUS_LINK_UP | \
+			 LINK_STATUS_PHYSICAL_LINK_FLAG | \
+			 LINK_STATUS_AUTO_NEGOTIATE_COMPLETE | \
+			 LINK_STATUS_RX_FLOW_CONTROL_FLAG_MASK | \
+			 LINK_STATUS_TX_FLOW_CONTROL_FLAG_MASK | \
+			 LINK_STATUS_PARALLEL_DETECTION_FLAG_MASK | \
+			 LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE | \
+			 LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE)
 
 #define SFP_EEPROM_CON_TYPE_ADDR		0x2
 	#define SFP_EEPROM_CON_TYPE_VAL_LC	0x7
@@ -6349,15 +6358,7 @@ static int bnx2x_update_link_down(struct link_params *params,
 	vars->mac_type = MAC_TYPE_NONE;
 
 	/* Update shared memory */
-	vars->link_status &= ~(LINK_STATUS_SPEED_AND_DUPLEX_MASK |
-			       LINK_STATUS_LINK_UP |
-			       LINK_STATUS_PHYSICAL_LINK_FLAG |
-			       LINK_STATUS_AUTO_NEGOTIATE_COMPLETE |
-			       LINK_STATUS_RX_FLOW_CONTROL_FLAG_MASK |
-			       LINK_STATUS_TX_FLOW_CONTROL_FLAG_MASK |
-			       LINK_STATUS_PARALLEL_DETECTION_FLAG_MASK |
-			       LINK_STATUS_LINK_PARTNER_SYMMETRIC_PAUSE |
-			       LINK_STATUS_LINK_PARTNER_ASYMMETRIC_PAUSE);
+	vars->link_status &= ~LINK_UPDATE_MASK;
 	vars->line_speed = 0;
 	bnx2x_update_mng(params, vars->link_status);
 
@@ -6505,6 +6506,7 @@ int bnx2x_link_update(struct link_params *params, struct link_vars *vars)
 	u16 ext_phy_line_speed = 0, prev_line_speed = vars->line_speed;
 	u8 active_external_phy = INT_PHY;
 	vars->phy_flags &= ~PHY_HALF_OPEN_CONN_FLAG;
+	vars->link_status &= ~LINK_UPDATE_MASK;
 	for (phy_index = INT_PHY; phy_index < params->num_phys;
 	      phy_index++) {
 		phy_vars[phy_index].flow_ctrl = 0;