Skip to content

L
linux
Commit 4a247a41 authored by Jiri Kosina's avatar Jiri Kosina
Browse files
Options

Merge branch 'upstream' into for-linus 

Conflicts:
	drivers/hid/Makefile
parents 77aa8e65 4d5df5d1
Hide whitespace changes
Inline Side-by-side
Showing with 860 additions and 1084 deletions
drivers/hid/Kconfig
View file @ 4a247a41
......@@ -200,11 +200,14 @@ config HID_KEYTOUCH
- Keytouch IEC 60945
config HID_KYE
tristate "Kye/Genius Ergo Mouse" if EXPERT
tristate "KYE/Genius devices"
depends on USB_HID
default !EXPERT
---help---
Support for Kye/Genius Ergo Mouse.
Support for KYE/Genius devices not fully compliant with HID standard:
- Ergo Mouse
- EasyPen i405X tablet
- MousePen i608X tablet
- EasyPen M610X tablet
config HID_UCLOGIC
tristate "UC-Logic"
......@@ -257,7 +260,9 @@ config HID_LOGITECH_DJ
---help---
Say Y if you want support for Logitech Unifying receivers and devices.
Unifying receivers are capable of pairing up to 6 Logitech compliant
devices to the same receiver.
devices to the same receiver. Without this driver it will be handled by
generic USB_HID driver and all incomming events will be multiplexed
into a single mouse and a single keyboard device.
config LOGITECH_FF
bool "Logitech force feedback support"
......@@ -485,6 +490,15 @@ config HID_ROCCAT
Say Y here if you have a Roccat mouse or keyboard and want
support for its special functionalities.
config HID_SAITEK
tristate "Saitek non-fully HID-compliant devices"
depends on USB_HID
---help---
Support for Saitek devices that are not fully compliant with the
HID standard.
Currently only supports the PS1000 controller.
config HID_SAMSUNG
tristate "Samsung InfraRed remote control or keyboards"
depends on USB_HID
......@@ -549,6 +563,12 @@ config SMARTJOYPLUS_FF
Say Y here if you have a SmartJoy PLUS PS2/USB adapter and want to
enable force feedback support for it.
config HID_TIVO
tristate "TiVo Slide Bluetooth remote control support"
depends on (USB_HID || BT_HIDP)
---help---
Say Y if you have a TiVo Slide Bluetooth remote control.
config HID_TOPSEED
tristate "TopSeed Cyberlink, BTC Emprex, Conceptronic remote control support"
depends on USB_HID
......
drivers/hid/Makefile
View file @ 4a247a41
......@@ -67,6 +67,7 @@ obj-$(CONFIG_HID_PRIMAX) += hid-primax.o
obj-$(CONFIG_HID_ROCCAT) += hid-roccat.o hid-roccat-common.o \
hid-roccat-arvo.o hid-roccat-isku.o hid-roccat-kone.o \
hid-roccat-koneplus.o hid-roccat-kovaplus.o hid-roccat-pyra.o
obj-$(CONFIG_HID_SAITEK) += hid-saitek.o
obj-$(CONFIG_HID_SAMSUNG) += hid-samsung.o
obj-$(CONFIG_HID_SMARTJOYPLUS) += hid-sjoy.o
obj-$(CONFIG_HID_SONY) += hid-sony.o
......@@ -74,6 +75,7 @@ obj-$(CONFIG_HID_SPEEDLINK) += hid-speedlink.o
obj-$(CONFIG_HID_SUNPLUS) += hid-sunplus.o
obj-$(CONFIG_HID_GREENASIA) += hid-gaff.o
obj-$(CONFIG_HID_THRUSTMASTER) += hid-tmff.o
obj-$(CONFIG_HID_TIVO) += hid-tivo.o
obj-$(CONFIG_HID_TOPSEED) += hid-topseed.o
obj-$(CONFIG_HID_TWINHAN) += hid-twinhan.o
obj-$(CONFIG_HID_UCLOGIC) += hid-uclogic.o
......
drivers/hid/hid-chicony.c
View file @ 4a247a41
......@@ -45,6 +45,12 @@ static int ch_input_mapping(struct hid_device *hdev, struct hid_input *hi,
case 0xff09: ch_map_key_clear(BTN_9); break;
case 0xff0a: ch_map_key_clear(BTN_A); break;
case 0xff0b: ch_map_key_clear(BTN_B); break;
case 0x00f1: ch_map_key_clear(KEY_WLAN); break;
case 0x00f2: ch_map_key_clear(KEY_BRIGHTNESSDOWN); break;
case 0x00f3: ch_map_key_clear(KEY_BRIGHTNESSUP); break;
case 0x00f4: ch_map_key_clear(KEY_DISPLAY_OFF); break;
case 0x00f7: ch_map_key_clear(KEY_CAMERA); break;
case 0x00f8: ch_map_key_clear(KEY_PROG1); break;
default:
return 0;
}
......@@ -53,6 +59,7 @@ static int ch_input_mapping(struct hid_device *hdev, struct hid_input *hi,
static const struct hid_device_id ch_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_TACTICAL_PAD) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_WIRELESS2) },
{ }
};
MODULE_DEVICE_TABLE(hid, ch_devices);
......
drivers/hid/hid-core.c
View file @ 4a247a41
......@@ -4,7 +4,7 @@
* Copyright (c) 1999 Andreas Gal
* Copyright (c) 2000-2005 Vojtech Pavlik <vojtech@suse.cz>
* Copyright (c) 2005 Michael Haboustak <mike-@cinci.rr.com> for Concept2, Inc
* Copyright (c) 2006-2010 Jiri Kosina
* Copyright (c) 2006-2012 Jiri Kosina
*/
/*
......@@ -50,6 +50,10 @@ module_param_named(debug, hid_debug, int, 0600);
MODULE_PARM_DESC(debug, "toggle HID debugging messages");
EXPORT_SYMBOL_GPL(hid_debug);
static int hid_ignore_special_drivers = 0;
module_param_named(ignore_special_drivers, hid_ignore_special_drivers, int, 0600);
MODULE_PARM_DESC(debug, "Ignore any special drivers and handle all devices by generic driver");
/*
* Register a new report for a device.
*/
......@@ -1395,6 +1399,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION_SOLAR) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_TACTICAL_PAD) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_WIRELESS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_WIRELESS2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CHUNGHWAT, USB_DEVICE_ID_CHUNGHWAT_MULTITOUCH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CREATIVELABS, USB_DEVICE_ID_PRODIKEYS_PCMIDI) },
{ HID_USB_DEVICE(USB_VENDOR_ID_CVTOUCH, USB_DEVICE_ID_CVTOUCH_SCREEN) },
......@@ -1418,6 +1423,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2515) },
{ HID_USB_DEVICE(USB_VENDOR_ID_EMS, USB_DEVICE_ID_EMS_TRIO_LINKER_PLUS_II) },
{ HID_USB_DEVICE(USB_VENDOR_ID_EZKEY, USB_DEVICE_ID_BTC_8193) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_FRUCTEL, USB_DEVICE_ID_GAMETEL_MT_MODE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, USB_DEVICE_ID_GENERAL_TOUCH_WIN7_TWOFINGERS) },
......@@ -1436,6 +1442,9 @@ static const struct hid_device_id hid_have_special_driver[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_KENSINGTON, USB_DEVICE_ID_KS_SLIMBLADE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KEYTOUCH, USB_DEVICE_ID_KEYTOUCH_IEC) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_ERGO_525V) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_EASYPEN_I405X) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_MOUSEPEN_I608X) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_EASYPEN_M610X) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LABTEC, USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LCPOWER, USB_DEVICE_ID_LCPOWER_LC1000 ) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LG, USB_DEVICE_ID_LG_MULTITOUCH) },
......@@ -1463,8 +1472,10 @@ static const struct hid_device_id hid_have_special_driver[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_DFGT_WHEEL) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G25_WHEEL) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G27_WHEEL) },
#if IS_ENABLED(CONFIG_HID_LOGITECH_DJ)
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_UNIFYING_RECEIVER) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_UNIFYING_RECEIVER_2) },
#endif
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_WII_WHEEL) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_SPACETRAVELLER) },
......@@ -1519,6 +1530,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_KOVAPLUS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_PYRA_WIRED) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_PYRA_WIRELESS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_PS1000) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_IR_REMOTE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SAMSUNG, USB_DEVICE_ID_SAMSUNG_WIRELESS_KBD_MOUSE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_SKYCABLE, USB_DEVICE_ID_SKYCABLE_WIRELESS_PRESENTER) },
......@@ -1538,6 +1550,8 @@ static const struct hid_device_id hid_have_special_driver[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb653) },
{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb654) },
{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb65a) },
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_TIVO, USB_DEVICE_ID_TIVO_SLIDE_BT) },
{ HID_USB_DEVICE(USB_VENDOR_ID_TIVO, USB_DEVICE_ID_TIVO_SLIDE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED, USB_DEVICE_ID_TOPSEED_CYBERLINK) },
{ HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED2, USB_DEVICE_ID_TOPSEED2_RF_COMBO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_TOUCH_INTL, USB_DEVICE_ID_TOUCH_INTL_MULTI_TOUCH) },
......@@ -1551,6 +1565,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_UNITEC, USB_DEVICE_ID_UNITEC_USB_TOUCH_0709) },
{ HID_USB_DEVICE(USB_VENDOR_ID_UNITEC, USB_DEVICE_ID_UNITEC_USB_TOUCH_0A19) },
{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_SMARTJOY_PLUS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_SUPER_JOY_BOX_3) },
{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_DUAL_USB_JOYPAD) },
{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SUPER_JOY_BOX_3_PRO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SUPER_DUAL_BOX_PRO) },
......@@ -1559,6 +1574,8 @@ static const struct hid_device_id hid_have_special_driver[] = {
{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_SLIM_TABLET_5_8_INCH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_SLIM_TABLET_12_1_INCH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_Q_PAD) },
{ HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_PID_0038) },
{ HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_MEDIA_TABLET_10_6_INCH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_MEDIA_TABLET_14_1_INCH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_XAT, USB_DEVICE_ID_XAT_CSR) },
......@@ -1674,7 +1691,7 @@ static int hid_bus_match(struct device *dev, struct device_driver *drv)
return 0;
/* generic wants all that don't have specialized driver */
if (!strncmp(hdrv->name, "generic-", 8))
if (!strncmp(hdrv->name, "generic-", 8) && !hid_ignore_special_drivers)
return !hid_match_id(hdev, hid_have_special_driver);
return 1;
......
drivers/hid/hid-ids.h
View file @ 4a247a41
......@@ -177,6 +177,7 @@
#define USB_VENDOR_ID_CH 0x068e
#define USB_DEVICE_ID_CH_PRO_THROTTLE 0x00f1
#define USB_DEVICE_ID_CH_PRO_PEDALS 0x00f2
#define USB_DEVICE_ID_CH_FIGHTERSTICK 0x00f3
#define USB_DEVICE_ID_CH_COMBATSTICK 0x00f4
#define USB_DEVICE_ID_CH_FLIGHT_SIM_ECLIPSE_YOKE 0x0051
#define USB_DEVICE_ID_CH_FLIGHT_SIM_YOKE 0x00ff
......@@ -194,6 +195,7 @@
#define USB_DEVICE_ID_CHICONY_TACTICAL_PAD 0x0418
#define USB_DEVICE_ID_CHICONY_MULTI_TOUCH 0xb19d
#define USB_DEVICE_ID_CHICONY_WIRELESS 0x0618
#define USB_DEVICE_ID_CHICONY_WIRELESS2 0x1123
#define USB_VENDOR_ID_CHUNGHWAT 0x2247
#define USB_DEVICE_ID_CHUNGHWAT_MULTITOUCH 0x0001
......@@ -280,6 +282,9 @@
#define USB_VENDOR_ID_EZKEY 0x0518
#define USB_DEVICE_ID_BTC_8193 0x0002
#define USB_VENDOR_ID_FRUCTEL 0x25B6
#define USB_DEVICE_ID_GAMETEL_MT_MODE 0x0002
#define USB_VENDOR_ID_GAMERON 0x0810
#define USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR 0x0001
#define USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR 0x0002
......@@ -417,6 +422,9 @@
#define USB_VENDOR_ID_KYE 0x0458
#define USB_DEVICE_ID_KYE_ERGO_525V 0x0087
#define USB_DEVICE_ID_KYE_GPEN_560 0x5003
#define USB_DEVICE_ID_KYE_EASYPEN_I405X 0x5010
#define USB_DEVICE_ID_KYE_MOUSEPEN_I608X 0x5011
#define USB_DEVICE_ID_KYE_EASYPEN_M610X 0x5013
#define USB_VENDOR_ID_LABTEC 0x1020
#define USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD 0x0006
......@@ -629,6 +637,7 @@
#define USB_VENDOR_ID_SAITEK 0x06a3
#define USB_DEVICE_ID_SAITEK_RUMBLEPAD 0xff17
#define USB_DEVICE_ID_SAITEK_PS1000 0x0621
#define USB_VENDOR_ID_SAMSUNG 0x0419
#define USB_DEVICE_ID_SAMSUNG_IR_REMOTE 0x0001
......@@ -670,6 +679,10 @@
#define USB_VENDOR_ID_THRUSTMASTER 0x044f
#define USB_VENDOR_ID_TIVO 0x150a
#define USB_DEVICE_ID_TIVO_SLIDE_BT 0x1200
#define USB_DEVICE_ID_TIVO_SLIDE 0x1201
#define USB_VENDOR_ID_TOPSEED 0x0766
#define USB_DEVICE_ID_TOPSEED_CYBERLINK 0x0204
......@@ -720,6 +733,8 @@
#define USB_VENDOR_ID_WALTOP 0x172f
#define USB_DEVICE_ID_WALTOP_SLIM_TABLET_5_8_INCH 0x0032
#define USB_DEVICE_ID_WALTOP_SLIM_TABLET_12_1_INCH 0x0034
#define USB_DEVICE_ID_WALTOP_Q_PAD 0x0037
#define USB_DEVICE_ID_WALTOP_PID_0038 0x0038
#define USB_DEVICE_ID_WALTOP_MEDIA_TABLET_10_6_INCH 0x0501
#define USB_DEVICE_ID_WALTOP_MEDIA_TABLET_14_1_INCH 0x0500
......@@ -728,6 +743,7 @@
#define USB_DEVICE_ID_1_PHIDGETSERVO_20 0x8101
#define USB_DEVICE_ID_4_PHIDGETSERVO_20 0x8104
#define USB_DEVICE_ID_8_8_4_IF_KIT 0x8201
#define USB_DEVICE_ID_SUPER_JOY_BOX_3 0x8888
#define USB_DEVICE_ID_QUAD_USB_JOYPAD 0x8800
#define USB_DEVICE_ID_DUAL_USB_JOYPAD 0x8866
......
drivers/hid/hid-kye.c
View file @ 4a247a41
......@@ -3,6 +3,7 @@
*
* Copyright (c) 2009 Jiri Kosina
* Copyright (c) 2009 Tomas Hanak
* Copyright (c) 2012 Nikolai Kondrashov
*/
/*
......@@ -15,36 +16,399 @@
#include <linux/device.h>
#include <linux/hid.h>
#include <linux/module.h>
#include <linux/usb.h>
#include "usbhid/usbhid.h"
#include "hid-ids.h"
/* the fixups that need to be done:
* - change led usage page to button for extra buttons
* - report size 8 count 1 must be size 1 count 8 for button bitfield
* - change the button usage range to 4-7 for the extra buttons
/*
* See EasyPen i405X description, device and HID report descriptors at
* http://sf.net/apps/mediawiki/digimend/?title=KYE_EasyPen_i405X
*/
/* Original EasyPen i405X report descriptor size */
#define EASYPEN_I405X_RDESC_ORIG_SIZE 476
/* Fixed EasyPen i405X report descriptor */
static __u8 easypen_i405x_rdesc_fixed[] = {
0x06, 0x00, 0xFF, /* Usage Page (FF00h), */
0x09, 0x01, /* Usage (01h), */
0xA1, 0x01, /* Collection (Application), */
0x85, 0x05, /* Report ID (5), */
0x09, 0x01, /* Usage (01h), */
0x15, 0x80, /* Logical Minimum (-128), */
0x25, 0x7F, /* Logical Maximum (127), */
0x75, 0x08, /* Report Size (8), */
0x95, 0x07, /* Report Count (7), */
0xB1, 0x02, /* Feature (Variable), */
0xC0, /* End Collection, */
0x05, 0x0D, /* Usage Page (Digitizer), */
0x09, 0x02, /* Usage (Pen), */
0xA1, 0x01, /* Collection (Application), */
0x85, 0x10, /* Report ID (16), */
0x09, 0x20, /* Usage (Stylus), */
0xA0, /* Collection (Physical), */
0x14, /* Logical Minimum (0), */
0x25, 0x01, /* Logical Maximum (1), */
0x75, 0x01, /* Report Size (1), */
0x09, 0x42, /* Usage (Tip Switch), */
0x09, 0x44, /* Usage (Barrel Switch), */
0x09, 0x46, /* Usage (Tablet Pick), */
0x95, 0x03, /* Report Count (3), */
0x81, 0x02, /* Input (Variable), */
0x95, 0x04, /* Report Count (4), */
0x81, 0x03, /* Input (Constant, Variable), */
0x09, 0x32, /* Usage (In Range), */
0x95, 0x01, /* Report Count (1), */
0x81, 0x02, /* Input (Variable), */
0x75, 0x10, /* Report Size (16), */
0x95, 0x01, /* Report Count (1), */
0xA4, /* Push, */
0x05, 0x01, /* Usage Page (Desktop), */
0x55, 0xFD, /* Unit Exponent (-3), */
0x65, 0x13, /* Unit (Inch), */
0x34, /* Physical Minimum (0), */
0x09, 0x30, /* Usage (X), */
0x46, 0x7C, 0x15, /* Physical Maximum (5500), */
0x26, 0x00, 0x37, /* Logical Maximum (14080), */
0x81, 0x02, /* Input (Variable), */
0x09, 0x31, /* Usage (Y), */
0x46, 0xA0, 0x0F, /* Physical Maximum (4000), */
0x26, 0x00, 0x28, /* Logical Maximum (10240), */
0x81, 0x02, /* Input (Variable), */
0xB4, /* Pop, */
0x09, 0x30, /* Usage (Tip Pressure), */
0x26, 0xFF, 0x03, /* Logical Maximum (1023), */
0x81, 0x02, /* Input (Variable), */
0xC0, /* End Collection, */
0xC0 /* End Collection */
};
/*
* See MousePen i608X description, device and HID report descriptors at
* http://sf.net/apps/mediawiki/digimend/?title=KYE_MousePen_i608X
*/
/* Original MousePen i608X report descriptor size */
#define MOUSEPEN_I608X_RDESC_ORIG_SIZE 476
/* Fixed MousePen i608X report descriptor */
static __u8 mousepen_i608x_rdesc_fixed[] = {
0x06, 0x00, 0xFF, /* Usage Page (FF00h), */
0x09, 0x01, /* Usage (01h), */
0xA1, 0x01, /* Collection (Application), */
0x85, 0x05, /* Report ID (5), */
0x09, 0x01, /* Usage (01h), */
0x15, 0x80, /* Logical Minimum (-128), */
0x25, 0x7F, /* Logical Maximum (127), */
0x75, 0x08, /* Report Size (8), */
0x95, 0x07, /* Report Count (7), */
0xB1, 0x02, /* Feature (Variable), */
0xC0, /* End Collection, */
0x05, 0x0D, /* Usage Page (Digitizer), */
0x09, 0x02, /* Usage (Pen), */
0xA1, 0x01, /* Collection (Application), */
0x85, 0x10, /* Report ID (16), */
0x09, 0x20, /* Usage (Stylus), */
0xA0, /* Collection (Physical), */
0x14, /* Logical Minimum (0), */
0x25, 0x01, /* Logical Maximum (1), */
0x75, 0x01, /* Report Size (1), */
0x09, 0x42, /* Usage (Tip Switch), */
0x09, 0x44, /* Usage (Barrel Switch), */
0x09, 0x46, /* Usage (Tablet Pick), */
0x95, 0x03, /* Report Count (3), */
0x81, 0x02, /* Input (Variable), */
0x95, 0x04, /* Report Count (4), */
0x81, 0x03, /* Input (Constant, Variable), */
0x09, 0x32, /* Usage (In Range), */
0x95, 0x01, /* Report Count (1), */
0x81, 0x02, /* Input (Variable), */
0x75, 0x10, /* Report Size (16), */
0x95, 0x01, /* Report Count (1), */
0xA4, /* Push, */
0x05, 0x01, /* Usage Page (Desktop), */
0x55, 0xFD, /* Unit Exponent (-3), */
0x65, 0x13, /* Unit (Inch), */
0x34, /* Physical Minimum (0), */
0x09, 0x30, /* Usage (X), */
0x46, 0x40, 0x1F, /* Physical Maximum (8000), */
0x26, 0x00, 0x50, /* Logical Maximum (20480), */
0x81, 0x02, /* Input (Variable), */
0x09, 0x31, /* Usage (Y), */
0x46, 0x70, 0x17, /* Physical Maximum (6000), */
0x26, 0x00, 0x3C, /* Logical Maximum (15360), */
0x81, 0x02, /* Input (Variable), */
0xB4, /* Pop, */
0x09, 0x30, /* Usage (Tip Pressure), */
0x26, 0xFF, 0x03, /* Logical Maximum (1023), */
0x81, 0x02, /* Input (Variable), */
0xC0, /* End Collection, */
0xC0, /* End Collection, */
0x05, 0x01, /* Usage Page (Desktop), */
0x09, 0x02, /* Usage (Mouse), */
0xA1, 0x01, /* Collection (Application), */
0x85, 0x11, /* Report ID (17), */
0x09, 0x01, /* Usage (Pointer), */
0xA0, /* Collection (Physical), */
0x14, /* Logical Minimum (0), */
0xA4, /* Push, */
0x05, 0x09, /* Usage Page (Button), */
0x75, 0x01, /* Report Size (1), */
0x19, 0x01, /* Usage Minimum (01h), */
0x29, 0x03, /* Usage Maximum (03h), */
0x25, 0x01, /* Logical Maximum (1), */
0x95, 0x03, /* Report Count (3), */
0x81, 0x02, /* Input (Variable), */
0x95, 0x05, /* Report Count (5), */
0x81, 0x01, /* Input (Constant), */
0xB4, /* Pop, */
0x95, 0x01, /* Report Count (1), */
0xA4, /* Push, */
0x55, 0xFD, /* Unit Exponent (-3), */
0x65, 0x13, /* Unit (Inch), */
0x34, /* Physical Minimum (0), */
0x75, 0x10, /* Report Size (16), */
0x09, 0x30, /* Usage (X), */
0x46, 0x40, 0x1F, /* Physical Maximum (8000), */
0x26, 0x00, 0x50, /* Logical Maximum (20480), */
0x81, 0x02, /* Input (Variable), */
0x09, 0x31, /* Usage (Y), */
0x46, 0x70, 0x17, /* Physical Maximum (6000), */
0x26, 0x00, 0x3C, /* Logical Maximum (15360), */
0x81, 0x02, /* Input (Variable), */
0xB4, /* Pop, */
0x75, 0x08, /* Report Size (8), */
0x09, 0x38, /* Usage (Wheel), */
0x15, 0xFF, /* Logical Minimum (-1), */
0x25, 0x01, /* Logical Maximum (1), */
0x81, 0x06, /* Input (Variable, Relative), */
0x81, 0x01, /* Input (Constant), */
0xC0, /* End Collection, */
0xC0 /* End Collection */
};
/*
* See EasyPen M610X description, device and HID report descriptors at
* http://sf.net/apps/mediawiki/digimend/?title=KYE_EasyPen_M610X
*/
/* Original EasyPen M610X report descriptor size */
#define EASYPEN_M610X_RDESC_ORIG_SIZE 476
/* Fixed EasyPen M610X report descriptor */
static __u8 easypen_m610x_rdesc_fixed[] = {
0x06, 0x00, 0xFF, /* Usage Page (FF00h), */
0x09, 0x01, /* Usage (01h), */
0xA1, 0x01, /* Collection (Application), */
0x85, 0x05, /* Report ID (5), */
0x09, 0x01, /* Usage (01h), */
0x15, 0x80, /* Logical Minimum (-128), */
0x25, 0x7F, /* Logical Maximum (127), */
0x75, 0x08, /* Report Size (8), */
0x95, 0x07, /* Report Count (7), */
0xB1, 0x02, /* Feature (Variable), */
0xC0, /* End Collection, */
0x05, 0x0D, /* Usage Page (Digitizer), */
0x09, 0x02, /* Usage (Pen), */
0xA1, 0x01, /* Collection (Application), */
0x85, 0x10, /* Report ID (16), */
0x09, 0x20, /* Usage (Stylus), */
0xA0, /* Collection (Physical), */
0x14, /* Logical Minimum (0), */
0x25, 0x01, /* Logical Maximum (1), */
0x75, 0x01, /* Report Size (1), */
0x09, 0x42, /* Usage (Tip Switch), */
0x09, 0x44, /* Usage (Barrel Switch), */
0x09, 0x46, /* Usage (Tablet Pick), */
0x95, 0x03, /* Report Count (3), */
0x81, 0x02, /* Input (Variable), */
0x95, 0x04, /* Report Count (4), */
0x81, 0x03, /* Input (Constant, Variable), */
0x09, 0x32, /* Usage (In Range), */
0x95, 0x01, /* Report Count (1), */
0x81, 0x02, /* Input (Variable), */
0x75, 0x10, /* Report Size (16), */
0x95, 0x01, /* Report Count (1), */
0xA4, /* Push, */
0x05, 0x01, /* Usage Page (Desktop), */
0x55, 0xFD, /* Unit Exponent (-3), */
0x65, 0x13, /* Unit (Inch), */
0x34, /* Physical Minimum (0), */
0x09, 0x30, /* Usage (X), */
0x46, 0x10, 0x27, /* Physical Maximum (10000), */
0x27, 0x00, 0xA0, 0x00, 0x00, /* Logical Maximum (40960), */
0x81, 0x02, /* Input (Variable), */
0x09, 0x31, /* Usage (Y), */
0x46, 0x6A, 0x18, /* Physical Maximum (6250), */
0x26, 0x00, 0x64, /* Logical Maximum (25600), */
0x81, 0x02, /* Input (Variable), */
0xB4, /* Pop, */
0x09, 0x30, /* Usage (Tip Pressure), */
0x26, 0xFF, 0x03, /* Logical Maximum (1023), */
0x81, 0x02, /* Input (Variable), */
0xC0, /* End Collection, */
0xC0, /* End Collection, */
0x05, 0x0C, /* Usage Page (Consumer), */
0x09, 0x01, /* Usage (Consumer Control), */
0xA1, 0x01, /* Collection (Application), */
0x85, 0x12, /* Report ID (18), */
0x14, /* Logical Minimum (0), */
0x25, 0x01, /* Logical Maximum (1), */
0x75, 0x01, /* Report Size (1), */
0x95, 0x04, /* Report Count (4), */
0x0A, 0x1A, 0x02, /* Usage (AC Undo), */
0x0A, 0x79, 0x02, /* Usage (AC Redo Or Repeat), */
0x0A, 0x2D, 0x02, /* Usage (AC Zoom In), */
0x0A, 0x2E, 0x02, /* Usage (AC Zoom Out), */
0x81, 0x02, /* Input (Variable), */
0x95, 0x01, /* Report Count (1), */
0x75, 0x14, /* Report Size (20), */
0x81, 0x03, /* Input (Constant, Variable), */
0x75, 0x20, /* Report Size (32), */
0x81, 0x03, /* Input (Constant, Variable), */
0xC0 /* End Collection */
};
static __u8 *kye_report_fixup(struct hid_device *hdev, __u8 *rdesc,
unsigned int *rsize)
{
if (*rsize >= 74 &&
rdesc[61] == 0x05 && rdesc[62] == 0x08 &&
rdesc[63] == 0x19 && rdesc[64] == 0x08 &&
rdesc[65] == 0x29 && rdesc[66] == 0x0f &&
rdesc[71] == 0x75 && rdesc[72] == 0x08 &&
rdesc[73] == 0x95 && rdesc[74] == 0x01) {
hid_info(hdev,
"fixing up Kye/Genius Ergo Mouse report descriptor\n");
rdesc[62] = 0x09;
rdesc[64] = 0x04;
rdesc[66] = 0x07;
rdesc[72] = 0x01;
rdesc[74] = 0x08;
switch (hdev->product) {
case USB_DEVICE_ID_KYE_ERGO_525V:
/* the fixups that need to be done:
* - change led usage page to button for extra buttons
* - report size 8 count 1 must be size 1 count 8 for button
* bitfield
* - change the button usage range to 4-7 for the extra
* buttons
*/
if (*rsize >= 74 &&
rdesc[61] == 0x05 && rdesc[62] == 0x08 &&
rdesc[63] == 0x19 && rdesc[64] == 0x08 &&
rdesc[65] == 0x29 && rdesc[66] == 0x0f &&
rdesc[71] == 0x75 && rdesc[72] == 0x08 &&
rdesc[73] == 0x95 && rdesc[74] == 0x01) {
hid_info(hdev,
"fixing up Kye/Genius Ergo Mouse "
"report descriptor\n");
rdesc[62] = 0x09;
rdesc[64] = 0x04;
rdesc[66] = 0x07;
rdesc[72] = 0x01;
rdesc[74] = 0x08;
}
break;
case USB_DEVICE_ID_KYE_EASYPEN_I405X:
if (*rsize == EASYPEN_I405X_RDESC_ORIG_SIZE) {
rdesc = easypen_i405x_rdesc_fixed;
*rsize = sizeof(easypen_i405x_rdesc_fixed);
}
break;
case USB_DEVICE_ID_KYE_MOUSEPEN_I608X:
if (*rsize == MOUSEPEN_I608X_RDESC_ORIG_SIZE) {
rdesc = mousepen_i608x_rdesc_fixed;
*rsize = sizeof(mousepen_i608x_rdesc_fixed);
}
break;
case USB_DEVICE_ID_KYE_EASYPEN_M610X:
if (*rsize == EASYPEN_M610X_RDESC_ORIG_SIZE) {
rdesc = easypen_m610x_rdesc_fixed;
*rsize = sizeof(easypen_m610x_rdesc_fixed);
}
break;
}
return rdesc;
}
/**
* Enable fully-functional tablet mode by setting a special feature report.
*
* @hdev: HID device
*
* The specific report ID and data were discovered by sniffing the
* Windows driver traffic.
*/
static int kye_tablet_enable(struct hid_device *hdev)
{
struct list_head *list;
struct list_head *head;
struct hid_report *report;
__s32 *value;
list = &hdev->report_enum[HID_FEATURE_REPORT].report_list;
list_for_each(head, list) {
report = list_entry(head, struct hid_report, list);
if (report->id == 5)
break;
}
if (head == list) {
hid_err(hdev, "tablet-enabling feature report not found\n");
return -ENODEV;
}
if (report->maxfield < 1 || report->field[0]->report_count < 7) {
hid_err(hdev, "invalid tablet-enabling feature report\n");
return -ENODEV;
}
value = report->field[0]->value;
value[0] = 0x12;
value[1] = 0x10;
value[2] = 0x11;
value[3] = 0x12;
value[4] = 0x00;
value[5] = 0x00;
value[6] = 0x00;
usbhid_submit_report(hdev, report, USB_DIR_OUT);
return 0;
}
static int kye_probe(struct hid_device *hdev, const struct hid_device_id *id)
{
int ret;
ret = hid_parse(hdev);
if (ret) {
hid_err(hdev, "parse failed\n");
goto err;
}
ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
if (ret) {
hid_err(hdev, "hw start failed\n");
goto err;
}
switch (id->product) {
case USB_DEVICE_ID_KYE_EASYPEN_I405X:
case USB_DEVICE_ID_KYE_MOUSEPEN_I608X:
case USB_DEVICE_ID_KYE_EASYPEN_M610X:
ret = kye_tablet_enable(hdev);
if (ret) {
hid_err(hdev, "tablet enabling failed\n");
goto enabling_err;
}
break;
}
return 0;
enabling_err:
hid_hw_stop(hdev);
err:
return ret;
}
static const struct hid_device_id kye_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_ERGO_525V) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KYE,
USB_DEVICE_ID_KYE_EASYPEN_I405X) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KYE,
USB_DEVICE_ID_KYE_MOUSEPEN_I608X) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KYE,
USB_DEVICE_ID_KYE_EASYPEN_M610X) },
{ }
};
MODULE_DEVICE_TABLE(hid, kye_devices);
......@@ -52,6 +416,7 @@ MODULE_DEVICE_TABLE(hid, kye_devices);
static struct hid_driver kye_driver = {
.name = "kye",
.id_table = kye_devices,
.probe = kye_probe,
.report_fixup = kye_report_fixup,
};
......
drivers/hid/hid-magicmouse.c
View file @ 4a247a41
......@@ -418,6 +418,8 @@ static void magicmouse_setup_input(struct input_dev *input, struct hid_device *h
__set_bit(BTN_TOOL_TRIPLETAP, input->keybit);
__set_bit(BTN_TOOL_QUADTAP, input->keybit);
__set_bit(BTN_TOUCH, input->keybit);
__set_bit(INPUT_PROP_POINTER, input->propbit);
__set_bit(INPUT_PROP_BUTTONPAD, input->propbit);
}
if (report_touches) {
......
drivers/hid/hid-multitouch.c
View file @ 4a247a41
......@@ -837,6 +837,11 @@ static const struct hid_device_id mt_devices[] = {
HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH,
USB_DEVICE_ID_GENERAL_TOUCH_WIN7_TWOFINGERS) },
/* Gametel game controller */
{ .driver_data = MT_CLS_DEFAULT,
HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_FRUCTEL,
USB_DEVICE_ID_GAMETEL_MT_MODE) },
/* GoodTouch panels */
{ .driver_data = MT_CLS_DEFAULT,
HID_USB_DEVICE(USB_VENDOR_ID_GOODTOUCH,
......
drivers/hid/hid-saitek.c 0 → 100644
View file @ 4a247a41
/*
* HID driver for Saitek devices, currently only the PS1000 (USB gamepad).
* Fixes the HID report descriptor by removing a non-existent axis and
* clearing the constant bit on the input reports for buttons and d-pad.
* (This module is based on "hid-ortek".)
*
* Copyright (c) 2012 Andreas Hübner
*/
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*/
#include <linux/device.h>
#include <linux/hid.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include "hid-ids.h"
static __u8 *saitek_report_fixup(struct hid_device *hdev, __u8 *rdesc,
unsigned int *rsize)
{
if (*rsize == 137 && rdesc[20] == 0x09 && rdesc[21] == 0x33
&& rdesc[94] == 0x81 && rdesc[95] == 0x03
&& rdesc[110] == 0x81 && rdesc[111] == 0x03) {
hid_info(hdev, "Fixing up Saitek PS1000 report descriptor\n");
/* convert spurious axis to a "noop" Logical Minimum (0) */
rdesc[20] = 0x15;
rdesc[21] = 0x00;
/* clear constant bit on buttons and d-pad */
rdesc[95] = 0x02;
rdesc[111] = 0x02;
}
return rdesc;
}
static const struct hid_device_id saitek_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_SAITEK, USB_DEVICE_ID_SAITEK_PS1000)},
{ }
};
MODULE_DEVICE_TABLE(hid, saitek_devices);
static struct hid_driver saitek_driver = {
.name = "saitek",
.id_table = saitek_devices,
.report_fixup = saitek_report_fixup
};
static int __init saitek_init(void)
{
return hid_register_driver(&saitek_driver);
}
static void __exit saitek_exit(void)
{
hid_unregister_driver(&saitek_driver);
}
module_init(saitek_init);
module_exit(saitek_exit);
MODULE_LICENSE("GPL");
drivers/hid/hid-sjoy.c
View file @ 4a247a41
......@@ -155,7 +155,8 @@ static int sjoy_probe(struct hid_device *hdev, const struct hid_device_id *id)
}
static const struct hid_device_id sjoy_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SUPER_JOY_BOX_3_PRO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SUPER_JOY_BOX_3_PRO),
.driver_data = HID_QUIRK_NOGET },
{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SUPER_DUAL_BOX_PRO),
.driver_data = HID_QUIRK_MULTI_INPUT | HID_QUIRK_NOGET |
HID_QUIRK_SKIP_OUTPUT_REPORTS },
......@@ -163,8 +164,9 @@ static const struct hid_device_id sjoy_devices[] = {
.driver_data = HID_QUIRK_MULTI_INPUT | HID_QUIRK_NOGET |
HID_QUIRK_SKIP_OUTPUT_REPORTS },
{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_SMARTJOY_PLUS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_SUPER_JOY_BOX_3) },
{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_DUAL_USB_JOYPAD),
.driver_data = HID_QUIRK_MULTI_INPUT | HID_QUIRK_NOGET |
.driver_data = HID_QUIRK_MULTI_INPUT |
HID_QUIRK_SKIP_OUTPUT_REPORTS },
{ }
};
......
drivers/hid/hid-tivo.c 0 → 100644
View file @ 4a247a41
/*
* HID driver for TiVo Slide Bluetooth remote
*
* Copyright (c) 2011 Jarod Wilson <jarod@redhat.com>
* based on the hid-topseed driver, which is in turn, based on hid-cherry...
*/
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*/
#include <linux/device.h>
#include <linux/hid.h>
#include <linux/module.h>
#include "hid-ids.h"
#define HID_UP_TIVOVENDOR 0xffff0000
#define tivo_map_key_clear(c) hid_map_usage_clear(hi, usage, bit, max, \
EV_KEY, (c))
static int tivo_input_mapping(struct hid_device *hdev, struct hid_input *hi,
struct hid_field *field, struct hid_usage *usage,
unsigned long **bit, int *max)
{
switch (usage->hid & HID_USAGE_PAGE) {
case HID_UP_TIVOVENDOR:
switch (usage->hid & HID_USAGE) {
/* TiVo button */
case 0x3d: tivo_map_key_clear(KEY_MEDIA); break;
/* Live TV */
case 0x3e: tivo_map_key_clear(KEY_TV); break;
/* Red thumbs down */
case 0x41: tivo_map_key_clear(KEY_KPMINUS); break;
/* Green thumbs up */
case 0x42: tivo_map_key_clear(KEY_KPPLUS); break;
default:
return 0;
}
break;
case HID_UP_CONSUMER:
switch (usage->hid & HID_USAGE) {
/* Enter/Last (default mapping: KEY_LAST) */
case 0x083: tivo_map_key_clear(KEY_ENTER); break;
/* Info (default mapping: KEY_PROPS) */
case 0x209: tivo_map_key_clear(KEY_INFO); break;
default:
return 0;
}
break;
default:
return 0;
}
/* This means we found a matching mapping here, else, look in the
* standard hid mappings in hid-input.c */
return 1;
}
static const struct hid_device_id tivo_devices[] = {
/* TiVo Slide Bluetooth remote, pairs with a Broadcom dongle */
{ HID_USB_DEVICE(USB_VENDOR_ID_TIVO, USB_DEVICE_ID_TIVO_SLIDE_BT) },
{ HID_USB_DEVICE(USB_VENDOR_ID_TIVO, USB_DEVICE_ID_TIVO_SLIDE) },
{ }
};
MODULE_DEVICE_TABLE(hid, tivo_devices);
static struct hid_driver tivo_driver = {
.name = "tivo_slide",
.id_table = tivo_devices,
.input_mapping = tivo_input_mapping,
};
static int __init tivo_init(void)
{
return hid_register_driver(&tivo_driver);
}
static void __exit tivo_exit(void)
{
hid_unregister_driver(&tivo_driver);
}
module_init(tivo_init);
module_exit(tivo_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Jarod Wilson <jarod@redhat.com>");
drivers/hid/hid-uclogic.c
View file @ 4a247a41
......@@ -18,141 +18,16 @@
#include "hid-ids.h"
/*
* The original descriptors of WPXXXXU tablets have three report IDs, of
* which only two are used (8 and 9), and the remaining (7) seems to have
* the originally intended pen description which was abandoned for some
* reason. From this unused description it is possible to extract the
* actual physical extents and resolution. All the models use the same
* descriptor with different extents for the unused report ID.
*
* Here it is:
*
* Usage Page (Digitizer), ; Digitizer (0Dh)
* Usage (Pen), ; Pen (02h, application collection)
* Collection (Application),
* Report ID (7),
* Usage (Stylus), ; Stylus (20h, logical collection)
* Collection (Physical),
* Usage (Tip Switch), ; Tip switch (42h, momentary control)
* Usage (Barrel Switch), ; Barrel switch (44h, momentary control)
* Usage (Eraser), ; Eraser (45h, momentary control)
* Logical Minimum (0),
* Logical Maximum (1),
* Report Size (1),
* Report Count (3),
* Input (Variable),
* Report Count (3),
* Input (Constant, Variable),
* Usage (In Range), ; In range (32h, momentary control)
* Report Count (1),
* Input (Variable),
* Report Count (1),
* Input (Constant, Variable),
* Usage Page (Desktop), ; Generic desktop controls (01h)
* Usage (X), ; X (30h, dynamic value)
* Report Size (16),
* Report Count (1),
* Push,
* Unit Exponent (13),
* Unit (Inch^3),
* Physical Minimum (0),
* Physical Maximum (Xpm),
* Logical Maximum (Xlm),
* Input (Variable),
* Usage (Y), ; Y (31h, dynamic value)
* Physical Maximum (Ypm),
* Logical Maximum (Ylm),
* Input (Variable),
* Pop,
* Usage Page (Digitizer), ; Digitizer (0Dh)
* Usage (Tip Pressure), ; Tip pressure (30h, dynamic value)
* Logical Maximum (1023),
* Input (Variable),
* Report Size (16),
* End Collection,
* End Collection,
* Usage Page (Desktop), ; Generic desktop controls (01h)
* Usage (Mouse), ; Mouse (02h, application collection)
* Collection (Application),
* Report ID (8),
* Usage (Pointer), ; Pointer (01h, physical collection)
* Collection (Physical),
* Usage Page (Button), ; Button (09h)
* Usage Minimum (01h),
* Usage Maximum (03h),
* Logical Minimum (0),
* Logical Maximum (1),
* Report Count (3),
* Report Size (1),
* Input (Variable),
* Report Count (5),
* Input (Constant),
* Usage Page (Desktop), ; Generic desktop controls (01h)
* Usage (X), ; X (30h, dynamic value)
* Usage (Y), ; Y (31h, dynamic value)
* Usage (Wheel), ; Wheel (38h, dynamic value)
* Usage (00h),
* Logical Minimum (-127),
* Logical Maximum (127),
* Report Size (8),
* Report Count (4),
* Input (Variable, Relative),
* End Collection,
* End Collection,
* Usage Page (Desktop), ; Generic desktop controls (01h)
* Usage (Mouse), ; Mouse (02h, application collection)
* Collection (Application),
* Report ID (9),
* Usage (Pointer), ; Pointer (01h, physical collection)
* Collection (Physical),
* Usage Page (Button), ; Button (09h)
* Usage Minimum (01h),
* Usage Maximum (03h),
* Logical Minimum (0),
* Logical Maximum (1),
* Report Count (3),
* Report Size (1),
* Input (Variable),
* Report Count (5),
* Input (Constant),
* Usage Page (Desktop), ; Generic desktop controls (01h)
* Usage (X), ; X (30h, dynamic value)
* Usage (Y), ; Y (31h, dynamic value)
* Logical Minimum (0),
* Logical Maximum (32767),
* Physical Minimum (0),
* Physical Maximum (32767),
* Report Count (2),
* Report Size (16),
* Input (Variable),
* Usage Page (Digitizer), ; Digitizer (0Dh)
* Usage (Tip Pressure), ; Tip pressure (30h, dynamic value)
* Logical Maximum (1023),
* Report Count (1),
* Report Size (16),
* Input (Variable),
* End Collection,
* End Collection
*
* Here are the extents values for the WPXXXXU models:
*
* Xpm Xlm Ypm Ylm
* WP4030U 4000 8000 3000 6000
* WP5540U 5500 11000 4000 8000
* WP8060U 8000 16000 6000 12000
*
* This suggests that all of them have 2000 LPI resolution, as advertised.
* See WPXXXXU model descriptions, device and HID report descriptors at
* http://sf.net/apps/mediawiki/digimend/?title=UC-Logic_Tablet_WP4030U
* http://sf.net/apps/mediawiki/digimend/?title=UC-Logic_Tablet_WP5540U
* http://sf.net/apps/mediawiki/digimend/?title=UC-Logic_Tablet_WP8060U
*/
/* Size of the original descriptor of WPXXXXU tablets */
#define WPXXXXU_RDESC_ORIG_SIZE 212
/*
* Fixed WP4030U report descriptor.
* Although the hardware might actually support it, the mouse description
* has been removed, since there seems to be no devices having one and it
* wouldn't make much sense because of the working area size.
*/
/* Fixed WP4030U report descriptor */
static __u8 wp4030u_rdesc_fixed[] = {
0x05, 0x0D, /* Usage Page (Digitizer), */
0x09, 0x02, /* Usage (Pen), */
......@@ -343,148 +218,14 @@ static __u8 wp8060u_rdesc_fixed[] = {
};
/*
* Original WP1062 report descriptor.
*
* Only report ID 9 is actually used.
*
* Usage Page (Digitizer), ; Digitizer (0Dh)
* Usage (Pen), ; Pen (02h, application collection)
* Collection (Application),
* Report ID (7),
* Usage (Stylus), ; Stylus (20h, logical collection)
* Collection (Physical),
* Usage (Tip Switch), ; Tip switch (42h, momentary control)
* Usage (Barrel Switch), ; Barrel switch (44h, momentary control)
* Usage (Eraser), ; Eraser (45h, momentary control)
* Logical Minimum (0),
* Logical Maximum (1),
* Report Size (1),
* Report Count (3),
* Input (Variable),
* Report Count (3),
* Input (Constant, Variable),
* Usage (In Range), ; In range (32h, momentary control)
* Report Count (1),
* Input (Variable),
* Report Count (1),
* Input (Constant, Variable),
* Usage Page (Desktop), ; Generic desktop controls (01h)
* Usage (X), ; X (30h, dynamic value)
* Report Size (16),
* Report Count (1),
* Push,
* Unit Exponent (13),
* Unit (Inch),
* Physical Minimum (0),
* Physical Maximum (10000),
* Logical Maximum (20000),
* Input (Variable),
* Usage (Y), ; Y (31h, dynamic value)
* Physical Maximum (6583),
* Logical Maximum (13166),
* Input (Variable),
* Pop,
* Usage Page (Digitizer), ; Digitizer (0Dh)
* Usage (Tip Pressure), ; Tip pressure (30h, dynamic value)
* Logical Maximum (1023),
* Input (Variable),
* Report Size (16),
* End Collection,
* End Collection,
* Usage Page (Desktop), ; Generic desktop controls (01h)
* Usage (Mouse), ; Mouse (02h, application collection)
* Collection (Application),
* Report ID (8),
* Usage (Pointer), ; Pointer (01h, physical collection)
* Collection (Physical),
* Usage Page (Button), ; Button (09h)
* Usage Minimum (01h),
* Usage Maximum (03h),
* Logical Minimum (0),
* Logical Maximum (1),
* Report Count (3),
* Report Size (1),
* Input (Variable),
* Report Count (5),
* Input (Constant),
* Usage Page (Desktop), ; Generic desktop controls (01h)
* Usage (X), ; X (30h, dynamic value)
* Usage (Y), ; Y (31h, dynamic value)
* Usage (Wheel), ; Wheel (38h, dynamic value)
* Usage (00h),
* Logical Minimum (-127),
* Logical Maximum (127),
* Report Size (8),
* Report Count (4),
* Input (Variable, Relative),
* End Collection,
* End Collection,
* Usage Page (Desktop), ; Generic desktop controls (01h)
* Usage (Mouse), ; Mouse (02h, application collection)
* Collection (Application),
* Report ID (9),
* Usage (Pointer), ; Pointer (01h, physical collection)
* Collection (Physical),
* Usage Page (Button), ; Button (09h)
* Usage Minimum (01h),
* Usage Maximum (03h),
* Logical Minimum (0),
* Logical Maximum (1),
* Report Count (3),
* Report Size (1),
* Input (Variable),
* Report Count (4),
* Input (Constant),
* Usage Page (Digitizer), ; Digitizer (0Dh)
* Usage (In Range), ; In range (32h, momentary control)
* Report Count (1),
* Input (Variable),
* Usage Page (Desktop), ; Generic desktop controls (01h)
* Usage (X), ; X (30h, dynamic value)
* Report Size (16),
* Report Count (1),
* Push,
* Unit Exponent (13),
* Unit (Inch),
* Physical Minimum (0),
* Physical Maximum (10000),
* Logical Maximum (20000),
* Input (Variable),
* Usage (Y), ; Y (31h, dynamic value)
* Physical Maximum (6583),
* Logical Maximum (13166),
* Input (Variable),
* Pop,
* Usage Page (Digitizer), ; Digitizer (0Dh)
* Usage (Tip Pressure), ; Tip pressure (30h, dynamic value)
* Logical Maximum (1023),
* Report Count (1),
* Report Size (16),
* Input (Variable),
* End Collection,
* End Collection,
* Usage Page (Desktop), ; Generic desktop controls (01h)
* Usage (00h),
* Collection (Application),
* Report ID (4),
* Logical Minimum (0),
* Logical Maximum (255),
* Usage (00h),
* Report Size (8),
* Report Count (3),
* Feature (Variable),
* End Collection
* See WP1062 description, device and HID report descriptors at
* http://sf.net/apps/mediawiki/digimend/?title=UC-Logic_Tablet_WP1062
*/
/* Size of the original descriptor of WP1062 tablet */
#define WP1062_RDESC_ORIG_SIZE 254
/*
* Fixed WP1062 report descriptor.
*
* Removed unused reports, corrected second barrel button usage code, physical
* units.
*/
/* Fixed WP1062 report descriptor */
static __u8 wp1062_rdesc_fixed[] = {
0x05, 0x0D, /* Usage Page (Digitizer), */
0x09, 0x02, /* Usage (Pen), */
......@@ -530,146 +271,14 @@ static __u8 wp1062_rdesc_fixed[] = {
};
/*
* Original PF1209 report descriptor.
*
* The descriptor is similar to WPXXXXU descriptors, with an addition of a
* feature report (ID 4) of unknown purpose.
*
* Although the advertised resolution is 4000 LPI the unused report ID
* (taken from WPXXXXU, it seems) states 2000 LPI, but it is probably
* incorrect and is a result of blind copying without understanding. Anyway
* the real logical extents are always scaled to 0..32767, which IMHO spoils
* the precision.
*
* Usage Page (Digitizer), ; Digitizer (0Dh)
* Usage (Pen), ; Pen (02h, application collection)
* Collection (Application),
* Report ID (7),
* Usage (Stylus), ; Stylus (20h, logical collection)
* Collection (Physical),
* Usage (Tip Switch), ; Tip switch (42h, momentary control)
* Usage (Barrel Switch), ; Barrel switch (44h, momentary control)
* Usage (Eraser), ; Eraser (45h, momentary control)
* Logical Minimum (0),
* Logical Maximum (1),
* Report Size (1),
* Report Count (3),
* Input (Variable),
* Report Count (3),
* Input (Constant, Variable),
* Usage (In Range), ; In range (32h, momentary control)
* Report Count (1),
* Input (Variable),
* Report Count (1),
* Input (Constant, Variable),
* Usage Page (Desktop), ; Generic desktop controls (01h)
* Usage (X), ; X (30h, dynamic value)
* Report Size (16),
* Report Count (1),
* Push,
* Unit Exponent (13),
* Unit (Inch^3),
* Physical Minimum (0),
* Physical Maximum (12000),
* Logical Maximum (24000),
* Input (Variable),
* Usage (Y), ; Y (31h, dynamic value)
* Physical Maximum (9000),
* Logical Maximum (18000),
* Input (Variable),
* Pop,
* Usage Page (Digitizer), ; Digitizer (0Dh)
* Usage (Tip Pressure), ; Tip pressure (30h, dynamic value)
* Logical Maximum (1023),
* Input (Variable),
* Report Size (16),
* End Collection,
* End Collection,
* Usage Page (Desktop), ; Generic desktop controls (01h)
* Usage (Mouse), ; Mouse (02h, application collection)
* Collection (Application),
* Report ID (8),
* Usage (Pointer), ; Pointer (01h, physical collection)
* Collection (Physical),
* Usage Page (Button), ; Button (09h)
* Usage Minimum (01h),
* Usage Maximum (03h),
* Logical Minimum (0),
* Logical Maximum (1),
* Report Count (3),
* Report Size (1),
* Input (Variable),
* Report Count (5),
* Input (Constant),
* Usage Page (Desktop), ; Generic desktop controls (01h)
* Usage (X), ; X (30h, dynamic value)
* Usage (Y), ; Y (31h, dynamic value)
* Usage (Wheel), ; Wheel (38h, dynamic value)
* Usage (00h),
* Logical Minimum (-127),
* Logical Maximum (127),
* Report Size (8),
* Report Count (4),
* Input (Variable, Relative),
* End Collection,
* End Collection,
* Usage Page (Desktop), ; Generic desktop controls (01h)
* Usage (Mouse), ; Mouse (02h, application collection)
* Collection (Application),
* Report ID (9),
* Usage (Pointer), ; Pointer (01h, physical collection)
* Collection (Physical),
* Usage Page (Button), ; Button (09h)
* Usage Minimum (01h),
* Usage Maximum (03h),
* Logical Minimum (0),
* Logical Maximum (1),
* Report Count (3),
* Report Size (1),
* Input (Variable),
* Report Count (5),
* Input (Constant),
* Usage Page (Desktop), ; Generic desktop controls (01h)
* Usage (X), ; X (30h, dynamic value)
* Usage (Y), ; Y (31h, dynamic value)
* Logical Minimum (0),
* Logical Maximum (32767),
* Physical Minimum (0),
* Physical Maximum (32767),
* Report Count (2),
* Report Size (16),
* Input (Variable),
* Usage Page (Digitizer), ; Digitizer (0Dh)
* Usage (Tip Pressure), ; Tip pressure (30h, dynamic value)
* Logical Maximum (1023),
* Report Count (1),
* Report Size (16),
* Input (Variable),
* End Collection,
* End Collection,
* Usage Page (Desktop), ; Generic desktop controls (01h)
* Usage (00h),
* Collection (Application),
* Report ID (4),
* Logical Minimum (0),
* Logical Maximum (255),
* Usage (00h),
* Report Size (8),
* Report Count (3),
* Feature (Variable),
* End Collection
* See PF1209 description, device and HID report descriptors at
* http://sf.net/apps/mediawiki/digimend/?title=UC-Logic_Tablet_PF1209
*/
/* Size of the original descriptor of PF1209 tablet */
#define PF1209_RDESC_ORIG_SIZE 234
/*
* Fixed PF1209 report descriptor
*
* The descriptor is fixed similarly to WP5540U and WP8060U, plus the
* feature report is removed, because its purpose is unknown and it is of no
* use to the generic HID driver anyway for now.
*/
/* Fixed PF1209 report descriptor */
static __u8 pf1209_rdesc_fixed[] = {
0x05, 0x0D, /* Usage Page (Digitizer), */
0x09, 0x02, /* Usage (Pen), */
......
drivers/hid/hid-wacom.c
View file @ 4a247a41
......@@ -590,6 +590,7 @@ static int wacom_probe(struct hid_device *hdev,
wacom_poke(hdev, 1);
break;
case USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH:
sprintf(hdev->name, "%s", "Wacom Intuos4 WL");
wdata->features = 0;
wacom_set_features(hdev);
break;
......
drivers/hid/hid-waltop.c
View file @ 4a247a41
......@@ -43,139 +43,14 @@
*/
/*
* Original Slim Tablet 5.8 inch report descriptor.
*
* All the reports except the report with ID 16 (the stylus) are unused,
* possibly because the tablet is not configured to, or because they were
* just copied from a more capable model. The full purpose of features
* described for report ID 2 is unknown.
*
* The stylus buttons are described as three bit fields, whereas actually
* it's an "array", i.e. they're reported as button numbers (1, 2 and 3).
* The "eraser" field is not used. There is also a "push" without a "pop" in
* the stylus description.
*
* Usage Page (Desktop), ; Generic desktop controls (01h)
* Usage (Mouse), ; Mouse (02h, application collection)
* Collection (Application),
* Report ID (1),
* Usage (Pointer), ; Pointer (01h, physical collection)
* Collection (Physical),
* Usage Page (Button), ; Button (09h)
* Usage Minimum (01h),
* Usage Maximum (05h),
* Logical Minimum (0),
* Logical Maximum (1),
* Report Size (1),
* Report Count (5),
* Input (Variable),
* Report Size (3),
* Report Count (1),
* Input (Constant, Variable),
* Usage Page (Desktop), ; Generic desktop controls (01h)
* Usage (X), ; X (30h, dynamic value)
* Usage (Y), ; Y (31h, dynamic value)
* Usage (Wheel), ; Wheel (38h, dynamic value)
* Logical Minimum (-127),
* Logical Maximum (127),
* Report Size (8),
* Report Count (3),
* Input (Variable, Relative),
* End Collection,
* End Collection,
* Usage Page (Digitizer), ; Digitizer (0Dh)
* Usage (Pen), ; Pen (02h, application collection)
* Collection (Application),
* Report ID (2),
* Usage (Stylus), ; Stylus (20h, logical collection)
* Collection (Physical),
* Usage (00h),
* Logical Minimum (0),
* Logical Maximum (255),
* Report Size (8),
* Report Count (7),
* Input (Variable),
* Usage (Azimuth), ; Azimuth (3Fh, dynamic value)
* Usage (Altitude), ; Altitude (40h, dynamic value)
* Logical Minimum (0),
* Logical Maximum (255),
* Report Size (8),
* Report Count (2),
* Feature (Variable),
* End Collection,
* Report ID (5),
* Usage Page (Digitizer), ; Digitizer (0Dh)
* Usage (Stylus), ; Stylus (20h, logical collection)
* Collection (Physical),
* Usage (00h),
* Logical Minimum (0),
* Logical Maximum (255),
* Report Size (8),
* Report Count (7),
* Input (Variable),
* End Collection,
* Report ID (10),
* Usage Page (Digitizer), ; Digitizer (0Dh)
* Usage (Stylus), ; Stylus (20h, logical collection)
* Collection (Physical),
* Usage (00h),
* Logical Minimum (0),
* Logical Maximum (255),
* Report Size (8),
* Report Count (3),
* Input (Variable),
* End Collection,
* Report ID (16),
* Usage (Stylus), ; Stylus (20h, logical collection)
* Collection (Physical),
* Usage (Tip Switch), ; Tip switch (42h, momentary control)
* Usage (Barrel Switch), ; Barrel switch (44h, momentary control)
* Usage (Invert), ; Invert (3Ch, momentary control)
* Usage (Eraser), ; Eraser (45h, momentary control)
* Usage (In Range), ; In range (32h, momentary control)
* Logical Minimum (0),
* Logical Maximum (1),
* Report Size (1),
* Report Count (5),
* Input (Variable),
* Report Count (3),
* Input (Constant, Variable),
* Usage Page (Desktop), ; Generic desktop controls (01h)
* Usage (X), ; X (30h, dynamic value)
* Report Size (16),
* Report Count (1),
* Push,
* Unit Exponent (13),
* Unit (Inch^3),
* Logical Minimum (0),
* Logical Maximum (10000),
* Physical Minimum (0),
* Physical Maximum (10000),
* Input (Variable),
* Usage (Y), ; Y (31h, dynamic value)
* Logical Maximum (6000),
* Physical Maximum (6000),
* Input (Variable),
* Usage Page (Digitizer), ; Digitizer (0Dh)
* Usage (Tip Pressure), ; Tip pressure (30h, dynamic value)
* Logical Minimum (0),
* Logical Maximum (1023),
* Physical Minimum (0),
* Physical Maximum (1023),
* Input (Variable),
* End Collection,
* End Collection
* See Slim Tablet 5.8 inch description, device and HID report descriptors at
* http://sf.net/apps/mediawiki/digimend/?title=Waltop_Slim_Tablet_5.8%22
*/
/* Size of the original report descriptor of Slim Tablet 5.8 inch */
#define SLIM_TABLET_5_8_INCH_RDESC_ORIG_SIZE 222
/*
* Fixed Slim Tablet 5.8 inch descriptor.
*
* All the reports except the stylus report (ID 16) were removed as unused.
* The stylus buttons description was fixed.
*/
/* Fixed Slim Tablet 5.8 inch descriptor */
static __u8 slim_tablet_5_8_inch_rdesc_fixed[] = {
0x05, 0x0D, /* Usage Page (Digitizer), */
0x09, 0x02, /* Usage (Pen), */
......@@ -224,158 +99,14 @@ static __u8 slim_tablet_5_8_inch_rdesc_fixed[] = {
};
/*
* Original Slim Tablet 12.1 inch report descriptor.
*
* The descriptor is similar to the Slim Tablet 5.8 inch descriptor with the
* addition of a keyboard report, seemingly unused. It may have get here
* from a Media Tablet - probably an unimplemented feature.
*
* Usage Page (Desktop), ; Generic desktop controls (01h)
* Usage (Mouse), ; Mouse (02h, application collection)
* Collection (Application),
* Report ID (1),
* Usage (Pointer), ; Pointer (01h, physical collection)
* Collection (Physical),
* Usage Page (Button), ; Button (09h)
* Usage Minimum (01h),
* Usage Maximum (05h),
* Logical Minimum (0),
* Logical Maximum (1),
* Report Size (1),
* Report Count (5),
* Input (Variable),
* Report Size (3),
* Report Count (1),
* Input (Constant, Variable),
* Usage Page (Desktop), ; Generic desktop controls (01h)
* Usage (X), ; X (30h, dynamic value)
* Usage (Y), ; Y (31h, dynamic value)
* Usage (Wheel), ; Wheel (38h, dynamic value)
* Logical Minimum (-127),
* Logical Maximum (127),
* Report Size (8),
* Report Count (3),
* Input (Variable, Relative),
* End Collection,
* End Collection,
* Usage Page (Digitizer), ; Digitizer (0Dh)
* Usage (Pen), ; Pen (02h, application collection)
* Collection (Application),
* Report ID (2),
* Usage (Stylus), ; Stylus (20h, logical collection)
* Collection (Physical),
* Usage (00h),
* Logical Minimum (0),
* Logical Maximum (255),
* Report Size (8),
* Report Count (7),
* Input (Variable),
* Usage (Azimuth), ; Azimuth (3Fh, dynamic value)
* Usage (Altitude), ; Altitude (40h, dynamic value)
* Logical Minimum (0),
* Logical Maximum (255),
* Report Size (8),
* Report Count (2),
* Feature (Variable),
* End Collection,
* Report ID (5),
* Usage Page (Digitizer), ; Digitizer (0Dh)
* Usage (Stylus), ; Stylus (20h, logical collection)
* Collection (Physical),
* Usage (00h),
* Logical Minimum (0),
* Logical Maximum (255),
* Report Size (8),
* Report Count (7),
* Input (Variable),
* End Collection,
* Report ID (10),
* Usage Page (Digitizer), ; Digitizer (0Dh)
* Usage (Stylus), ; Stylus (20h, logical collection)
* Collection (Physical),
* Usage (00h),
* Logical Minimum (0),
* Logical Maximum (255),
* Report Size (8),
* Report Count (3),
* Input (Variable),
* End Collection,
* Report ID (16),
* Usage (Stylus), ; Stylus (20h, logical collection)
* Collection (Physical),
* Usage (Tip Switch), ; Tip switch (42h, momentary control)
* Usage (Barrel Switch), ; Barrel switch (44h, momentary control)
* Usage (Invert), ; Invert (3Ch, momentary control)
* Usage (Eraser), ; Eraser (45h, momentary control)
* Usage (In Range), ; In range (32h, momentary control)
* Logical Minimum (0),
* Logical Maximum (1),
* Report Size (1),
* Report Count (5),
* Input (Variable),
* Report Count (3),
* Input (Constant, Variable),
* Usage Page (Desktop), ; Generic desktop controls (01h)
* Usage (X), ; X (30h, dynamic value)
* Report Size (16),
* Report Count (1),
* Push,
* Unit Exponent (13),
* Unit (Inch^3),
* Logical Minimum (0),
* Logical Maximum (20000),
* Physical Minimum (0),
* Physical Maximum (20000),
* Input (Variable),
* Usage (Y), ; Y (31h, dynamic value)
* Logical Maximum (12500),
* Physical Maximum (12500),
* Input (Variable),
* Usage Page (Digitizer), ; Digitizer (0Dh)
* Usage (Tip Pressure), ; Tip pressure (30h, dynamic value)
* Logical Minimum (0),
* Logical Maximum (1023),
* Physical Minimum (0),
* Physical Maximum (1023),
* Input (Variable),
* End Collection,
* End Collection,
* Usage Page (Desktop), ; Generic desktop controls (01h)
* Usage (Keyboard), ; Keyboard (06h, application collection)
* Collection (Application),
* Report ID (13),
* Usage Page (Keyboard), ; Keyboard/keypad (07h)
* Usage Minimum (KB Leftcontrol), ; Keyboard left control
* ; (E0h, dynamic value)
* Usage Maximum (KB Right GUI), ; Keyboard right GUI (E7h, dynamic value)
* Logical Minimum (0),
* Logical Maximum (1),
* Report Size (1),
* Report Count (8),
* Input (Variable),
* Report Size (8),
* Report Count (1),
* Input (Constant),
* Usage Page (Keyboard), ; Keyboard/keypad (07h)
* Usage Minimum (None), ; No event (00h, selector)
* Usage Maximum (KB Application), ; Keyboard Application (65h, selector)
* Logical Minimum (0),
* Logical Maximum (101),
* Report Size (8),
* Report Count (5),
* Input,
* End Collection
* See Slim Tablet 12.1 inch description, device and HID report descriptors at
* http://sf.net/apps/mediawiki/digimend/?title=Waltop_Slim_Tablet_12.1%22
*/
/* Size of the original report descriptor of Slim Tablet 12.1 inch */
#define SLIM_TABLET_12_1_INCH_RDESC_ORIG_SIZE 269
/*
* Fixed Slim Tablet 12.1 inch descriptor.
*
* All the reports except the stylus report (ID 16) were removed as unused.
* The stylus buttons description was fixed.
*/
/* Fixed Slim Tablet 12.1 inch descriptor */
static __u8 slim_tablet_12_1_inch_rdesc_fixed[] = {
0x05, 0x0D, /* Usage Page (Digitizer), */
0x09, 0x02, /* Usage (Pen), */
......@@ -424,217 +155,128 @@ static __u8 slim_tablet_12_1_inch_rdesc_fixed[] = {
};
/*
* Original Media Tablet 10.6 inch report descriptor.
*
* There are at least two versions of this model in the wild. They are
* represented by Genius G-Pen M609 (older version) and Genius G-Pen M609X
* (newer version).
*
* Both versions have the usual pen with two barrel buttons and two
* identical wheels with center buttons in the top corners of the tablet
* base. They also have buttons on the top, between the wheels, for
* selecting the wheels' functions and wide/standard mode. In the wide mode
* the whole working surface is sensed, in the standard mode a narrower area
* is sensed, but the logical report extents remain the same. These modes
* correspond roughly to 16:9 and 4:3 aspect ratios respectively.
*
* The older version has three wheel function buttons ("scroll", "zoom" and
* "volume") and two separate buttons for wide and standard mode. The newer
* version has four wheel function buttons (plus "brush") and only one
* button is used for selecting wide/standard mode. So, the total number of
* buttons remains the same, but one of the mode buttons is repurposed as a
* wheels' function button in the newer version.
*
* The wheel functions are:
* scroll - the wheels act as scroll wheels, the center buttons switch
* between vertical and horizontal scrolling;
* zoom - the wheels zoom in/out, the buttons supposedly reset to 100%;
* volume - the wheels control the sound volume, the buttons mute;
* brush - the wheels are supposed to control brush width in a graphics
* editor, the buttons do nothing.
*
* Below is the newer version's report descriptor. It may very well be that
* the older version's descriptor is different and thus it won't be
* supported.
*
* The mouse report (ID 1) only uses the wheel field for reporting the tablet
* wheels' scroll mode. The keyboard report (ID 13) is used to report the
* wheels' zoom and brush control functions as key presses. The report ID 12
* is used to report the wheels' volume control functions. The stylus report
* (ID 16) has the same problems as the Slim Tablet 5.8 inch report has.
*
* The rest of the reports are unused, at least in the default configuration.
* The purpose of the features is unknown.
*
* Usage Page (Desktop),
* Usage (Mouse),
* Collection (Application),
* Report ID (1),
* Usage (Pointer),
* Collection (Physical),
* Usage Page (Button),
* Usage Minimum (01h),
* Usage Maximum (05h),
* Logical Minimum (0),
* Logical Maximum (1),
* Report Size (1),
* Report Count (5),
* Input (Variable),
* Report Size (3),
* Report Count (1),
* Input (Constant, Variable),
* Usage Page (Desktop),
* Usage (X),
* Usage (Y),
* Usage (Wheel),
* Logical Minimum (-127),
* Logical Maximum (127),
* Report Size (8),
* Report Count (3),
* Input (Variable, Relative),
* End Collection,
* End Collection,
* Usage Page (Digitizer),
* Usage (Pen),
* Collection (Application),
* Report ID (2),
* Usage (Stylus),
* Collection (Physical),
* Usage (00h),
* Logical Minimum (0),
* Logical Maximum (255),
* Report Size (8),
* Report Count (7),
* Input (Variable),
* Usage (Azimuth),
* Usage (Altitude),
* Logical Minimum (0),
* Logical Maximum (255),
* Report Size (8),
* Report Count (2),
* Feature (Variable),
* End Collection,
* Report ID (5),
* Usage Page (Digitizer),
* Usage (Stylus),
* Collection (Physical),
* Usage (00h),
* Logical Minimum (0),
* Logical Maximum (255),
* Report Size (8),
* Report Count (7),
* Input (Variable),
* End Collection,
* Report ID (10),
* Usage Page (Digitizer),
* Usage (Stylus),
* Collection (Physical),
* Usage (00h),
* Logical Minimum (0),
* Logical Maximum (255),
* Report Size (8),
* Report Count (7),
* Input (Variable),
* End Collection,
* Report ID (16),
* Usage (Stylus),
* Collection (Physical),
* Usage (Tip Switch),
* Usage (Barrel Switch),
* Usage (Invert),
* Usage (Eraser),
* Usage (In Range),
* Logical Minimum (0),
* Logical Maximum (1),
* Report Size (1),
* Report Count (5),
* Input (Variable),
* Report Count (3),
* Input (Constant, Variable),
* Usage Page (Desktop),
* Usage (X),
* Report Size (16),
* Report Count (1),
* Push,
* Unit Exponent (13),
* Unit (Inch^3),
* Logical Minimum (0),
* Logical Maximum (18000),
* Physical Minimum (0),
* Physical Maximum (18000),
* Input (Variable),
* Usage (Y),
* Logical Maximum (11000),
* Physical Maximum (11000),
* Input (Variable),
* Usage Page (Digitizer),
* Usage (Tip Pressure),
* Logical Minimum (0),
* Logical Maximum (1023),
* Physical Minimum (0),
* Physical Maximum (1023),
* Input (Variable),
* End Collection,
* End Collection,
* Usage Page (Desktop),
* Usage (Keyboard),
* Collection (Application),
* Report ID (13),
* Usage Page (Keyboard),
* Usage Minimum (KB Leftcontrol),
* Usage Maximum (KB Right GUI),
* Logical Minimum (0),
* Logical Maximum (1),
* Report Size (1),
* Report Count (8),
* Input (Variable),
* Report Size (8),
* Report Count (1),
* Input (Constant),
* Usage Page (Keyboard),
* Usage Minimum (None),
* Usage Maximum (KB Application),
* Logical Minimum (0),
* Logical Maximum (101),
* Report Size (8),
* Report Count (5),
* Input,
* End Collection,
* Usage Page (Consumer),
* Usage (Consumer Control),
* Collection (Application),
* Report ID (12),
* Usage (Volume Inc),
* Usage (Volume Dec),
* Usage (Mute),
* Logical Minimum (0),
* Logical Maximum (1),
* Report Size (1),
* Report Count (3),
* Input (Variable, Relative),
* Report Size (5),
* Report Count (1),
* Input (Constant, Variable, Relative),
* End Collection
* See Q Pad description, device and HID report descriptors at
* http://sf.net/apps/mediawiki/digimend/?title=Waltop_Q_Pad
*/
/* Size of the original report descriptor of Media Tablet 10.6 inch */
#define MEDIA_TABLET_10_6_INCH_RDESC_ORIG_SIZE 300
/* Size of the original report descriptor of Q Pad */
#define Q_PAD_RDESC_ORIG_SIZE 241
/* Fixed Q Pad descriptor */
static __u8 q_pad_rdesc_fixed[] = {
0x05, 0x0D, /* Usage Page (Digitizer), */
0x09, 0x02, /* Usage (Pen), */
0xA1, 0x01, /* Collection (Application), */
0x85, 0x10, /* Report ID (16), */
0x09, 0x20, /* Usage (Stylus), */
0xA0, /* Collection (Physical), */
0x09, 0x42, /* Usage (Tip Switch), */
0x09, 0x44, /* Usage (Barrel Switch), */
0x09, 0x46, /* Usage (Tablet Pick), */
0x15, 0x01, /* Logical Minimum (1), */
0x25, 0x03, /* Logical Maximum (3), */
0x75, 0x04, /* Report Size (4), */
0x95, 0x01, /* Report Count (1), */
0x80, /* Input, */
0x09, 0x32, /* Usage (In Range), */
0x14, /* Logical Minimum (0), */
0x25, 0x01, /* Logical Maximum (1), */
0x75, 0x01, /* Report Size (1), */
0x95, 0x01, /* Report Count (1), */
0x81, 0x02, /* Input (Variable), */
0x95, 0x03, /* Report Count (3), */
0x81, 0x03, /* Input (Constant, Variable), */
0x75, 0x10, /* Report Size (16), */
0x95, 0x01, /* Report Count (1), */
0x14, /* Logical Minimum (0), */
0xA4, /* Push, */
0x05, 0x01, /* Usage Page (Desktop), */
0x65, 0x13, /* Unit (Inch), */
0x55, 0xFD, /* Unit Exponent (-3), */
0x34, /* Physical Minimum (0), */
0x09, 0x30, /* Usage (X), */
0x46, 0x70, 0x17, /* Physical Maximum (6000), */
0x26, 0x00, 0x30, /* Logical Maximum (12288), */
0x81, 0x02, /* Input (Variable), */
0x09, 0x31, /* Usage (Y), */
0x46, 0x94, 0x11, /* Physical Maximum (4500), */
0x26, 0x00, 0x24, /* Logical Maximum (9216), */
0x81, 0x02, /* Input (Variable), */
0xB4, /* Pop, */
0x09, 0x30, /* Usage (Tip Pressure), */
0x26, 0xFF, 0x03, /* Logical Maximum (1023), */
0x81, 0x02, /* Input (Variable), */
0xC0, /* End Collection, */
0xC0 /* End Collection */
};
/*
* Fixed Media Tablet 10.6 inch descriptor.
*
* The descriptions of reports unused in the default configuration are
* removed. The stylus report (ID 16) is fixed similarly to Slim Tablet 5.8
* inch. The unused mouse report (ID 1) fields are replaced with constant
* padding.
*
* The keyboard report (ID 13) is hacked to instead have an "array" field
* reporting consumer page controls, and all the unused bits are masked out
* with constant padding. The "brush" wheels' function is represented as "Scan
* Previous/Next Track" controls due to the lack of brush controls in the
* usage tables specification.
* See description, device and HID report descriptors of tablet with PID 0038 at
* http://sf.net/apps/mediawiki/digimend/?title=Waltop_PID_0038
*/
/* Size of the original report descriptor of tablet with PID 0038 */
#define PID_0038_RDESC_ORIG_SIZE 241
/*
* Fixed report descriptor for tablet with PID 0038.
*/
static __u8 pid_0038_rdesc_fixed[] = {
0x05, 0x0D, /* Usage Page (Digitizer), */
0x09, 0x02, /* Usage (Pen), */
0xA1, 0x01, /* Collection (Application), */
0x85, 0x10, /* Report ID (16), */
0x09, 0x20, /* Usage (Stylus), */
0xA0, /* Collection (Physical), */
0x09, 0x42, /* Usage (Tip Switch), */
0x09, 0x44, /* Usage (Barrel Switch), */
0x09, 0x46, /* Usage (Tablet Pick), */
0x15, 0x01, /* Logical Minimum (1), */
0x25, 0x03, /* Logical Maximum (3), */
0x75, 0x04, /* Report Size (4), */
0x95, 0x01, /* Report Count (1), */
0x80, /* Input, */
0x09, 0x32, /* Usage (In Range), */
0x14, /* Logical Minimum (0), */
0x25, 0x01, /* Logical Maximum (1), */
0x75, 0x01, /* Report Size (1), */
0x95, 0x01, /* Report Count (1), */
0x81, 0x02, /* Input (Variable), */
0x95, 0x03, /* Report Count (3), */
0x81, 0x03, /* Input (Constant, Variable), */
0x75, 0x10, /* Report Size (16), */
0x95, 0x01, /* Report Count (1), */
0x14, /* Logical Minimum (0), */
0xA4, /* Push, */
0x05, 0x01, /* Usage Page (Desktop), */
0x65, 0x13, /* Unit (Inch), */
0x55, 0xFD, /* Unit Exponent (-3), */
0x34, /* Physical Minimum (0), */
0x09, 0x30, /* Usage (X), */
0x46, 0x2E, 0x22, /* Physical Maximum (8750), */
0x26, 0x00, 0x46, /* Logical Maximum (17920), */
0x81, 0x02, /* Input (Variable), */
0x09, 0x31, /* Usage (Y), */
0x46, 0x82, 0x14, /* Physical Maximum (5250), */
0x26, 0x00, 0x2A, /* Logical Maximum (10752), */
0x81, 0x02, /* Input (Variable), */
0xB4, /* Pop, */
0x09, 0x30, /* Usage (Tip Pressure), */
0x26, 0xFF, 0x03, /* Logical Maximum (1023), */
0x81, 0x02, /* Input (Variable), */
0xC0, /* End Collection, */
0xC0 /* End Collection */
};
/*
* See Media Tablet 10.6 inch description, device and HID report descriptors at
* http://sf.net/apps/mediawiki/digimend/?title=Waltop_Media_Tablet_10.6%22
*/
/* Size of the original report descriptor of Media Tablet 10.6 inch */
#define MEDIA_TABLET_10_6_INCH_RDESC_ORIG_SIZE 300
/* Fixed Media Tablet 10.6 inch descriptor */
static __u8 media_tablet_10_6_inch_rdesc_fixed[] = {
0x05, 0x0D, /* Usage Page (Digitizer), */
0x09, 0x02, /* Usage (Pen), */
......@@ -745,187 +387,14 @@ static __u8 media_tablet_10_6_inch_rdesc_fixed[] = {
};
/*
* Original Media Tablet 14.1 inch report descriptor.
*
* There are at least two versions of this model in the wild. They are
* represented by Genius G-Pen M712 (older version) and Genius G-Pen M712X
* (newer version). The hardware difference between these versions is the same
* as between older and newer versions of Media Tablet 10.6 inch. The report
* descriptors are identical for both versions.
*
* The function, behavior and report descriptor of this tablet is similar to
* that of Media Tablet 10.6 inch. However, there is one more field (with
* Consumer AC Pan usage) in the mouse description. Then the tablet X and Y
* logical extents both get scaled to 0..16383 range (a hardware limit?),
* which kind of defeats the advertised 4000 LPI resolution, considering the
* physical extents of 12x7.25 inches. Plus, reports 5, 10 and 255 are used
* sometimes (while moving the pen) with unknown purpose. Also, the key codes
* generated for zoom in/out are different.
*
* Usage Page (Desktop),
* Usage (Mouse),
* Collection (Application),
* Report ID (1),
* Usage (Pointer),
* Collection (Physical),
* Usage Page (Button),
* Usage Minimum (01h),
* Usage Maximum (05h),
* Logical Minimum (0),
* Logical Maximum (1),
* Report Size (1),
* Report Count (5),
* Input (Variable),
* Report Size (3),
* Report Count (1),
* Input (Constant, Variable),
* Usage Page (Desktop),
* Usage (X),
* Usage (Y),
* Usage (Wheel),
* Logical Minimum (-127),
* Logical Maximum (127),
* Report Size (8),
* Report Count (3),
* Input (Variable, Relative),
* Usage Page (Consumer),
* Logical Minimum (-127),
* Logical Maximum (127),
* Report Size (8),
* Report Count (1),
* Usage (AC Pan),
* Input (Variable, Relative),
* End Collection,
* End Collection,
* Usage Page (Digitizer),
* Usage (Pen),
* Collection (Application),
* Report ID (2),
* Usage (Stylus),
* Collection (Physical),
* Usage (00h),
* Logical Minimum (0),
* Logical Maximum (255),
* Report Size (8),
* Report Count (7),
* Input (Variable),
* Usage (Azimuth),
* Usage (Altitude),
* Logical Minimum (0),
* Logical Maximum (255),
* Report Size (8),
* Report Count (2),
* Feature (Variable),
* End Collection,
* Report ID (5),
* Usage Page (Digitizer),
* Usage (Stylus),
* Collection (Physical),
* Usage (00h),
* Logical Minimum (0),
* Logical Maximum (255),
* Report Size (8),
* Report Count (7),
* Input (Variable),
* End Collection,
* Report ID (10),
* Usage Page (Digitizer),
* Usage (Stylus),
* Collection (Physical),
* Usage (00h),
* Logical Minimum (0),
* Logical Maximum (255),
* Report Size (8),
* Report Count (7),
* Input (Variable),
* End Collection,
* Report ID (16),
* Usage (Stylus),
* Collection (Physical),
* Usage (Tip Switch),
* Usage (Barrel Switch),
* Usage (Invert),
* Usage (Eraser),
* Usage (In Range),
* Logical Minimum (0),
* Logical Maximum (1),
* Report Size (1),
* Report Count (5),
* Input (Variable),
* Report Count (3),
* Input (Constant, Variable),
* Usage Page (Desktop),
* Usage (X),
* Report Size (16),
* Report Count (1),
* Push,
* Unit Exponent (13),
* Unit (Inch^3),
* Logical Minimum (0),
* Logical Maximum (16383),
* Physical Minimum (0),
* Physical Maximum (16383),
* Input (Variable),
* Usage (Y),
* Input (Variable),
* Usage Page (Digitizer),
* Usage (Tip Pressure),
* Logical Minimum (0),
* Logical Maximum (1023),
* Physical Minimum (0),
* Physical Maximum (1023),
* Input (Variable),
* End Collection,
* End Collection,
* Usage Page (Desktop),
* Usage (Keyboard),
* Collection (Application),
* Report ID (13),
* Usage Page (Keyboard),
* Usage Minimum (KB Leftcontrol),
* Usage Maximum (KB Right GUI),
* Logical Minimum (0),
* Logical Maximum (1),
* Report Size (1),
* Report Count (8),
* Input (Variable),
* Report Size (8),
* Report Count (1),
* Input (Constant),
* Usage Page (Keyboard),
* Usage Minimum (None),
* Usage Maximum (KB Application),
* Logical Minimum (0),
* Logical Maximum (101),
* Report Size (8),
* Report Count (5),
* Input,
* End Collection,
* Usage Page (Consumer),
* Usage (Consumer Control),
* Collection (Application),
* Report ID (12),
* Usage (Volume Inc),
* Usage (Volume Dec),
* Usage (Mute),
* Logical Minimum (0),
* Logical Maximum (1),
* Report Size (1),
* Report Count (3),
* Input (Variable, Relative),
* Report Size (5),
* Report Count (1),
* Input (Constant, Variable, Relative),
* End Collection
* See Media Tablet 14.1 inch description, device and HID report descriptors at
* http://sf.net/apps/mediawiki/digimend/?title=Waltop_Media_Tablet_14.1%22
*/
/* Size of the original report descriptor of Media Tablet 14.1 inch */
#define MEDIA_TABLET_14_1_INCH_RDESC_ORIG_SIZE 309
/*
* Fixed Media Tablet 14.1 inch descriptor.
* It is fixed similarly to the Media Tablet 10.6 inch descriptor.
*/
/* Fixed Media Tablet 14.1 inch descriptor */
static __u8 media_tablet_14_1_inch_rdesc_fixed[] = {
0x05, 0x0D, /* Usage Page (Digitizer), */
0x09, 0x02, /* Usage (Pen), */
......@@ -1033,6 +502,47 @@ static __u8 media_tablet_14_1_inch_rdesc_fixed[] = {
0xC0 /* End Collection */
};
struct waltop_state {
u8 pressure0;
u8 pressure1;
};
static int waltop_probe(struct hid_device *hdev,
const struct hid_device_id *id)
{
int ret;
struct waltop_state *s;
s = kzalloc(sizeof(*s), GFP_KERNEL);
if (s == NULL) {
hid_err(hdev, "can't allocate device state\n");
ret = -ENOMEM;
goto err;
}
s->pressure0 = 0;
s->pressure1 = 0;
hid_set_drvdata(hdev, s);
ret = hid_parse(hdev);
if (ret) {
hid_err(hdev, "parse failed\n");
goto err;
}
ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
if (ret) {
hid_err(hdev, "hw start failed\n");
goto err;
}
return 0;
err:
kfree(s);
return ret;
}
static __u8 *waltop_report_fixup(struct hid_device *hdev, __u8 *rdesc,
unsigned int *rsize)
{
......@@ -1049,6 +559,18 @@ static __u8 *waltop_report_fixup(struct hid_device *hdev, __u8 *rdesc,
*rsize = sizeof(slim_tablet_12_1_inch_rdesc_fixed);
}
break;
case USB_DEVICE_ID_WALTOP_Q_PAD:
if (*rsize == Q_PAD_RDESC_ORIG_SIZE) {
rdesc = q_pad_rdesc_fixed;
*rsize = sizeof(q_pad_rdesc_fixed);
}
break;
case USB_DEVICE_ID_WALTOP_PID_0038:
if (*rsize == PID_0038_RDESC_ORIG_SIZE) {
rdesc = pid_0038_rdesc_fixed;
*rsize = sizeof(pid_0038_rdesc_fixed);
}
break;
case USB_DEVICE_ID_WALTOP_MEDIA_TABLET_10_6_INCH:
if (*rsize == MEDIA_TABLET_10_6_INCH_RDESC_ORIG_SIZE) {
rdesc = media_tablet_10_6_inch_rdesc_fixed;
......@@ -1065,11 +587,53 @@ static __u8 *waltop_report_fixup(struct hid_device *hdev, __u8 *rdesc,
return rdesc;
}
static int waltop_raw_event(struct hid_device *hdev, struct hid_report *report,
u8 *data, int size)
{
/* If this is a pen input report of a tablet with PID 0038 */
if (hdev->product == USB_DEVICE_ID_WALTOP_PID_0038 &&
report->type == HID_INPUT_REPORT &&
report->id == 16 &&
size == 8) {
struct waltop_state *s = hid_get_drvdata(hdev);
/*
* Ignore maximum pressure reported when a barrel button is
* pressed.
*/
/* If a barrel button is pressed */
if ((data[1] & 0xF) > 1) {
/* Use the last known pressure */
data[6] = s->pressure0;
data[7] = s->pressure1;
} else {
/* Remember reported pressure */
s->pressure0 = data[6];
s->pressure1 = data[7];
}
}
return 0;
}
static void waltop_remove(struct hid_device *hdev)
{
struct waltop_state *s = hid_get_drvdata(hdev);
hid_hw_stop(hdev);
kfree(s);
}
static const struct hid_device_id waltop_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_WALTOP,
USB_DEVICE_ID_WALTOP_SLIM_TABLET_5_8_INCH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_WALTOP,
USB_DEVICE_ID_WALTOP_SLIM_TABLET_12_1_INCH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_WALTOP,
USB_DEVICE_ID_WALTOP_Q_PAD) },
{ HID_USB_DEVICE(USB_VENDOR_ID_WALTOP,
USB_DEVICE_ID_WALTOP_PID_0038) },
{ HID_USB_DEVICE(USB_VENDOR_ID_WALTOP,
USB_DEVICE_ID_WALTOP_MEDIA_TABLET_10_6_INCH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_WALTOP,
......@@ -1081,7 +645,10 @@ MODULE_DEVICE_TABLE(hid, waltop_devices);
static struct hid_driver waltop_driver = {
.name = "waltop",
.id_table = waltop_devices,
.probe = waltop_probe,
.report_fixup = waltop_report_fixup,
.raw_event = waltop_raw_event,
.remove = waltop_remove,
};
static int __init waltop_init(void)
......
drivers/hid/usbhid/hid-quirks.c
View file @ 4a247a41
......@@ -60,6 +60,7 @@ static const struct hid_blacklist {
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_2PORTKVM, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVM, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVMC, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_FIGHTERSTICK, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_COMBATSTICK, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_FLIGHT_SIM_ECLIPSE_YOKE, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_FLIGHT_SIM_YOKE, HID_QUIRK_NOGET },
......@@ -96,6 +97,8 @@ static const struct hid_blacklist {
{ USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_MULTI_TOUCH, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_WIRELESS, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_SIGMA_MICRO, USB_DEVICE_ID_SIGMA_MICRO_KEYBOARD, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_MOUSEPEN_I608X, HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_EASYPEN_M610X, HID_QUIRK_MULTI_INPUT },
{ 0, 0 }
};
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7