Automatic merge of master.kernel.org:/home/rmk/linux-2.6-rmk.git

arch/arm/Kconfig

@@ -85,6 +85,7 @@ choice
 config ARCH_CLPS7500
 	bool "Cirrus-CL-PS7500FE"
 	select TIMER_ACORN
+	select ISA
 
 config ARCH_CLPS711X
 	bool "CLPS711x/EP721x-based"
@@ -96,6 +97,7 @@ config ARCH_CO285
 
 config ARCH_EBSA110
 	bool "EBSA-110"
+	select ISA
 	help
 	  This is an evaluation board for the StrongARM processor available
 	  from Digital. It has limited hardware on-board, including an onboard
@@ -120,13 +122,16 @@ config ARCH_INTEGRATOR
 
 config ARCH_IOP3XX
 	bool "IOP3xx-based"
+	select PCI
 
 config ARCH_IXP4XX
 	bool "IXP4xx-based"
 	select DMABOUNCE
+	select PCI
 
 config ARCH_IXP2000
 	bool "IXP2400/2800-based"
+	select PCI
 
 config ARCH_L7200
 	bool "LinkUp-L7200"
@@ -155,6 +160,8 @@ config ARCH_RPC
 
 config ARCH_SA1100
 	bool "SA1100-based"
+	select ISA
+	select DISCONTIGMEM
 
 config ARCH_S3C2410
 	bool "Samsung S3C2410"
@@ -165,6 +172,9 @@ config ARCH_S3C2410
 
 config ARCH_SHARK
 	bool "Shark"
+	select ISA
+	select ISA_DMA
+	select PCI
 
 config ARCH_LH7A40X
 	bool "Sharp LH7A40X"
@@ -252,8 +262,6 @@ config ARM_AMBA
 
 config ISA
 	bool
-	depends on FOOTBRIDGE_HOST || ARCH_SHARK || ARCH_CLPS7500 || ARCH_EBSA110 || ARCH_CDB89712 || ARCH_EDB7211 || ARCH_SA1100 || ARCH_MX1ADS
-	default y
 	help
 	  Find out whether you have ISA slots on your motherboard.  ISA is the
 	  name of a bus system, i.e. the way the CPU talks to the other stuff
@@ -263,8 +271,6 @@ config ISA
 
 config ISA_DMA
 	bool
-	depends on FOOTBRIDGE_HOST || ARCH_SHARK
-	default y
 
 config ISA_DMA_API
 	bool
@@ -272,7 +278,6 @@ config ISA_DMA_API
 
 config PCI
 	bool "PCI support" if ARCH_INTEGRATOR_AP
-	default y if ARCH_SHARK || FOOTBRIDGE_HOST || ARCH_IOP3XX || ARCH_IXP4XX || ARCH_IXP2000
 	help
 	  Find out whether you have a PCI motherboard. PCI is the name of a
 	  bus system, i.e. the way the CPU talks to the other stuff inside
@@ -300,7 +305,7 @@ menu "Kernel Features"
 
 config SMP
 	bool "Symmetric Multi-Processing (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && n
+	depends on EXPERIMENTAL #&& n
 	help
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If
@@ -340,8 +345,7 @@ config PREEMPT
 
 config DISCONTIGMEM
 	bool
-	depends on ARCH_EDB7211 || ARCH_SA1100 || (ARCH_LH7A40X && !LH7A40X_CONTIGMEM)
-	default y
+	default (ARCH_LH7A40X && !LH7A40X_CONTIGMEM)
 	help
 	  Say Y to support efficient handling of discontiguous physical memory,
 	  for architectures which are either NUMA (Non-Uniform Memory Access)

arch/arm/kernel/entry-armv.S

@@ -17,8 +17,8 @@
 
 #include <asm/glue.h>
 #include <asm/vfpmacros.h>
-#include <asm/hardware.h>		@ should be moved into entry-macro.S
-#include <asm/arch/irqs.h>		@ should be moved into entry-macro.S
+#include <asm/hardware.h>		/* should be moved into entry-macro.S */
+#include <asm/arch/irqs.h>		/* should be moved into entry-macro.S */
 #include <asm/arch/entry-macro.S>
 
 #include "entry-header.S"
@@ -505,9 +505,9 @@ ENTRY(__switch_to)
 	mra	r4, r5, acc0
 	stmia   ip, {r4, r5}
 #endif
-#ifdef CONFIG_HAS_TLS_REG
+#if defined(CONFIG_HAS_TLS_REG)
 	mcr	p15, 0, r3, c13, c0, 3		@ set TLS register
-#else
+#elif !defined(CONFIG_TLS_REG_EMUL)
 	mov	r4, #0xffff0fff
 	str	r3, [r4, #-15]			@ TLS val at 0xffff0ff0
 #endif
@@ -690,11 +690,7 @@ __kuser_cmpxchg:				@ 0xffff0fc0
 
 __kuser_get_tls:				@ 0xffff0fe0
 
-#ifndef CONFIG_HAS_TLS_REG
-
-#ifdef CONFIG_SMP  /* sanity check */
-#error "CONFIG_SMP without CONFIG_HAS_TLS_REG is wrong"
-#endif
+#if !defined(CONFIG_HAS_TLS_REG) && !defined(CONFIG_TLS_REG_EMUL)
 
 	ldr	r0, [pc, #(16 - 8)]		@ TLS stored at 0xffff0ff0
 	mov	pc, lr

arch/arm/kernel/head.S

@@ -19,6 +19,7 @@
 #include <asm/procinfo.h>
 #include <asm/ptrace.h>
 #include <asm/constants.h>
+#include <asm/thread_info.h>
 #include <asm/system.h>
 
 #define PROCINFO_MMUFLAGS	8
@@ -131,7 +132,7 @@ __switch_data:
 	.long	processor_id			@ r4
 	.long	__machine_arch_type		@ r5
 	.long	cr_alignment			@ r6
-	.long	init_thread_union+8192		@ sp
+	.long	init_thread_union + THREAD_START_SP @ sp
 
 /*
  * The following fragment of code is executed with the MMU on, and uses

arch/arm/kernel/process.c

@@ -256,8 +256,6 @@ static unsigned long *thread_info_head;
 static unsigned int nr_thread_info;
 
 #define EXTRA_TASK_STRUCT	4
-#define ll_alloc_task_struct() ((struct thread_info *) __get_free_pages(GFP_KERNEL,1))
-#define ll_free_task_struct(p) free_pages((unsigned long)(p),1)
 
 struct thread_info *alloc_thread_info(struct task_struct *task)
 {
@@ -274,17 +272,16 @@ struct thread_info *alloc_thread_info(struct task_struct *task)
 	}
 
 	if (!thread)
-		thread = ll_alloc_task_struct();
+		thread = (struct thread_info *)
+			   __get_free_pages(GFP_KERNEL, THREAD_SIZE_ORDER);
 
-#ifdef CONFIG_MAGIC_SYSRQ
+#ifdef CONFIG_DEBUG_STACK_USAGE
 	/*
 	 * The stack must be cleared if you want SYSRQ-T to
 	 * give sensible stack usage information
 	 */
-	if (thread) {
-		char *p = (char *)thread;
-		memzero(p+KERNEL_STACK_SIZE, KERNEL_STACK_SIZE);
-	}
+	if (thread)
+		memzero(thread, THREAD_SIZE);
 #endif
 	return thread;
 }
@@ -297,7 +294,7 @@ void free_thread_info(struct thread_info *thread)
 		thread_info_head = p;
 		nr_thread_info += 1;
 	} else
-		ll_free_task_struct(thread);
+		free_pages((unsigned long)thread, THREAD_SIZE_ORDER);
 }
 
 /*
@@ -350,7 +347,7 @@ copy_thread(int nr, unsigned long clone_flags, unsigned long stack_start,
 	struct thread_info *thread = p->thread_info;
 	struct pt_regs *childregs;
 
-	childregs = ((struct pt_regs *)((unsigned long)thread + THREAD_SIZE - 8)) - 1;
+	childregs = ((struct pt_regs *)((unsigned long)thread + THREAD_START_SP)) - 1;
 	*childregs = *regs;
 	childregs->ARM_r0 = 0;
 	childregs->ARM_sp = stack_start;
@@ -447,15 +444,17 @@ EXPORT_SYMBOL(kernel_thread);
 unsigned long get_wchan(struct task_struct *p)
 {
 	unsigned long fp, lr;
-	unsigned long stack_page;
+	unsigned long stack_start, stack_end;
 	int count = 0;
 	if (!p || p == current || p->state == TASK_RUNNING)
 		return 0;
 
-	stack_page = 4096 + (unsigned long)p->thread_info;
+	stack_start = (unsigned long)(p->thread_info + 1);
+	stack_end = ((unsigned long)p->thread_info) + THREAD_SIZE;
+
 	fp = thread_saved_fp(p);
 	do {
-		if (fp < stack_page || fp > 4092+stack_page)
+		if (fp < stack_start || fp > stack_end)
 			return 0;
 		lr = pc_pointer (((unsigned long *)fp)[-1]);
 		if (!in_sched_functions(lr))

arch/arm/kernel/sys_arm.c

@@ -302,7 +302,7 @@ long execve(const char *filename, char **argv, char **envp)
 		"b	ret_to_user"
 		:
 		: "r" (current_thread_info()),
-		  "Ir" (THREAD_SIZE - 8 - sizeof(regs)),
+		  "Ir" (THREAD_START_SP - sizeof(regs)),
 		  "r" (&regs),
 		  "Ir" (sizeof(regs))
 		: "r0", "r1", "r2", "r3", "ip", "memory");

arch/arm/kernel/traps.c

@@ -218,7 +218,8 @@ NORET_TYPE void die(const char *str, struct pt_regs *regs, int err)
 		tsk->comm, tsk->pid, tsk->thread_info + 1);
 
 	if (!user_mode(regs) || in_interrupt()) {
-		dump_mem("Stack: ", regs->ARM_sp, 8192+(unsigned long)tsk->thread_info);
+		dump_mem("Stack: ", regs->ARM_sp,
+			 THREAD_SIZE + (unsigned long)tsk->thread_info);
 		dump_backtrace(regs, tsk);
 		dump_instr(regs);
 	}
@@ -450,9 +451,9 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs)
 
 	case NR(set_tls):
 		thread->tp_value = regs->ARM_r0;
-#ifdef CONFIG_HAS_TLS_REG
+#if defined(CONFIG_HAS_TLS_REG)
 		asm ("mcr p15, 0, %0, c13, c0, 3" : : "r" (regs->ARM_r0) );
-#else
+#elif !defined(CONFIG_TLS_REG_EMUL)
 		/*
 		 * User space must never try to access this directly.
 		 * Expect your app to break eventually if you do so.
@@ -497,11 +498,14 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs)
 	return 0;
 }
 
-#if defined(CONFIG_CPU_32v6) && !defined(CONFIG_HAS_TLS_REG)
+#ifdef CONFIG_TLS_REG_EMUL
 
 /*
  * We might be running on an ARMv6+ processor which should have the TLS
- * register, but for some reason we can't use it and have to emulate it.
+ * register but for some reason we can't use it, or maybe an SMP system
+ * using a pre-ARMv6 processor (there are apparently a few prototypes like
+ * that in existence) and therefore access to that register must be
+ * emulated.
  */
 
 static int get_tp_trap(struct pt_regs *regs, unsigned int instr)

arch/arm/kernel/vmlinux.lds.S

@@ -5,6 +5,7 @@
 
 #include <asm-generic/vmlinux.lds.h>
 #include <linux/config.h>
+#include <asm/thread_info.h>
 	
 OUTPUT_ARCH(arm)
 ENTRY(stext)
@@ -103,7 +104,7 @@ SECTIONS
 	__data_loc = ALIGN(4);		/* location in binary */
 	. = DATAADDR;
 #else
-	. = ALIGN(8192);
+	. = ALIGN(THREAD_SIZE);
 	__data_loc = .;
 #endif
 

arch/arm/mach-clps711x/Kconfig

@@ -10,6 +10,7 @@ config ARCH_AUTCPU12
 
 config ARCH_CDB89712
 	bool "CDB89712"
+	select ISA
 	help
 	  This is an evaluation board from Cirrus for the CS89712 processor.
 	  The board includes 2 serial ports, Ethernet, IRDA, and expansion
@@ -26,6 +27,8 @@ config ARCH_CLEP7312
 
 config ARCH_EDB7211
 	bool "EDB7211"
+	select ISA
+	select DISCONTIGMEM
 	help
 	  Say Y here if you intend to run this kernel on a Cirrus Logic EDB-7211
 	  evaluation board.

arch/arm/mach-footbridge/Kconfig

@@ -5,6 +5,9 @@ menu "Footbridge Implementations"
 config ARCH_CATS
 	bool "CATS"
 	select FOOTBRIDGE_HOST
+	select ISA
+	select ISA_DMA
+	select PCI
 	help
 	  Say Y here if you intend to run this kernel on the CATS.
 
@@ -13,6 +16,9 @@ config ARCH_CATS
 config ARCH_PERSONAL_SERVER
 	bool "Compaq Personal Server"
 	select FOOTBRIDGE_HOST
+	select ISA
+	select ISA_DMA
+	select PCI
 	---help---
 	  Say Y here if you intend to run this kernel on the Compaq
 	  Personal Server.
@@ -42,6 +48,9 @@ config ARCH_EBSA285_HOST
 	bool "EBSA285 (host mode)"
 	select ARCH_EBSA285
 	select FOOTBRIDGE_HOST
+	select ISA
+	select ISA_DMA
+	select PCI
 	help
 	  Say Y here if you intend to run this kernel on the EBSA285 card
 	  in host ("central function") mode.
@@ -51,6 +60,9 @@ config ARCH_EBSA285_HOST
 config ARCH_NETWINDER
 	bool "NetWinder"
 	select FOOTBRIDGE_HOST
+	select ISA
+	select ISA_DMA
+	select PCI
 	help
 	  Say Y here if you intend to run this kernel on the Rebel.COM
 	  NetWinder.  Information about this machine can be found at:

arch/arm/mach-imx/Kconfig

@@ -4,6 +4,7 @@ menu "IMX Implementations"
 config ARCH_MX1ADS
 	bool "mx1ads"
 	depends on ARCH_IMX
+	select ISA
 	help
 	  Say Y here if you are using the Motorola MX1ADS board
 

arch/arm/mm/Kconfig

@@ -410,17 +410,23 @@ config CPU_BPREDICT_DISABLE
 	help
 	  Say Y here to disable branch prediction.  If unsure, say N.
 
+config TLS_REG_EMUL
+	bool
+	default y if (SMP || CPU_32v6) && (CPU_32v5 || CPU_32v4 || CPU_32v3)
+	help
+	  We might be running on an ARMv6+ processor which should have the TLS
+	  register but for some reason we can't use it, or maybe an SMP system
+	  using a pre-ARMv6 processor (there are apparently a few prototypes
+	  like that in existence) and therefore access to that register must
+	  be emulated.
+
 config HAS_TLS_REG
 	bool
-	depends on CPU_32v6 && !CPU_32v5 && !CPU_32v4 && !CPU_32v3
-	default y
+	depends on CPU_32v6
+	default y if !TLS_REG_EMUL
 	help
 	  This selects support for the CP15 thread register.
-	  It is defined to be available on ARMv6 or later.  However
-	  if the kernel is configured to support multiple CPUs including
-	  a pre-ARMv6 processors, or if a given ARMv6 processor doesn't
-	  implement the thread register for some reason, then access to
-	  this register from user space must be trapped and emulated.
-	  If user space is relying on the __kuser_get_tls code then
-	  there should not be any impact.
+	  It is defined to be available on ARMv6 or later.  If a particular
+	  ARMv6 or later CPU doesn't support it then it must omc;ide "select
+	  TLS_REG_EMUL" along with its other caracteristics.
 

include/asm-arm/arch-imx/imxfb.h

+/*
+ * This structure describes the machine which we are running on.
+ */
+struct imxfb_mach_info {
+	u_long		pixclock;
+
+	u_short		xres;
+	u_short		yres;
+
+	u_char		bpp;
+	u_char		hsync_len;
+	u_char		left_margin;
+	u_char		right_margin;
+
+	u_char		vsync_len;
+	u_char		upper_margin;
+	u_char		lower_margin;
+	u_char		sync;
+
+	u_int		cmap_greyscale:1,
+			cmap_inverse:1,
+			cmap_static:1,
+			unused:29;
+
+	u_int		pcr;
+	u_int		pwmr;
+	u_int		lscr1;
+
+	u_char * fixed_screen_cpu;
+	dma_addr_t fixed_screen_dma;
+
+	void (*lcd_power)(int);
+	void (*backlight_power)(int);
+};
+void set_imx_fb_info(struct imxfb_mach_info *hard_imx_fb_info);

include/asm-arm/processor.h

@@ -23,8 +23,6 @@
 #include <asm/procinfo.h>
 #include <asm/types.h>
 
-#define KERNEL_STACK_SIZE	PAGE_SIZE
-
 union debug_insn {
 	u32	arm;
 	u16	thumb;
@@ -87,8 +85,9 @@ unsigned long get_wchan(struct task_struct *p);
  */
 extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
 
-#define KSTK_EIP(tsk)	(((unsigned long *)(4096+(unsigned long)(tsk)->thread_info))[1019])
-#define KSTK_ESP(tsk)	(((unsigned long *)(4096+(unsigned long)(tsk)->thread_info))[1017])
+#define KSTK_REGS(tsk)	(((struct pt_regs *)(THREAD_START_SP + (unsigned long)(tsk)->thread_info)) - 1)
+#define KSTK_EIP(tsk)	KSTK_REGS(tsk)->ARM_pc
+#define KSTK_ESP(tsk)	KSTK_REGS(tsk)->ARM_sp
 
 /*
  * Prefetching support - only ARMv5.

include/asm-arm/thread_info.h

@@ -14,6 +14,10 @@
 
 #include <asm/fpstate.h>
 
+#define THREAD_SIZE_ORDER	1
+#define THREAD_SIZE		8192
+#define THREAD_START_SP		(THREAD_SIZE - 8)
+
 #ifndef __ASSEMBLY__
 
 struct task_struct;
@@ -77,8 +81,6 @@ struct thread_info {
 #define init_thread_info	(init_thread_union.thread_info)
 #define init_stack		(init_thread_union.stack)
 
-#define THREAD_SIZE		8192
-
 /*
  * how to get the thread information struct from C
  */