Commit 4adccf6f authored by Uwe Koziolek's avatar Uwe Koziolek Committed by Jeff Garzik

[PATCH] sata_sis: slave support on SiS965

SiS965 and SiS180 chips must support slave mode,
SiS965L and SiS964 chips must not support slave mode.

SCR_STATUS for SATA ports in powerdown state fixed.
Now returning 0x0113 instead of 0x0117. Avoids problem
on detecting sata_sis controller.
Signed-off-by: default avatarUwe Koziolek <uwe.koziolek@gmx.net>
Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
parent 98fa4b60
......@@ -173,7 +173,7 @@ static u32 sis_scr_cfg_read (struct ata_port *ap, unsigned int sc_reg)
if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED))
pci_read_config_dword(pdev, cfg_addr+0x10, &val2);
return val|val2;
return (val|val2) & 0xfffffffb; /* avoid problems with powerdowned ports */
}
static void sis_scr_cfg_write (struct ata_port *ap, unsigned int scr, u32 val)
......@@ -212,7 +212,7 @@ static u32 sis_scr_read (struct ata_port *ap, unsigned int sc_reg)
if ((pdev->device == 0x182) || (pmr & SIS_PMR_COMBINED))
val2 = inl(ap->ioaddr.scr_addr + (sc_reg * 4) + 0x10);
return val | val2;
return (val | val2) & 0xfffffffb;
}
static void sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
......@@ -239,7 +239,7 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
static int printed_version;
struct ata_probe_ent *probe_ent = NULL;
int rc;
u32 genctl;
u32 genctl, val;
struct ata_port_info pi = sis_port_info, *ppi[2] = { &pi, &pi };
int pci_dev_busy = 0;
u8 pmr;
......@@ -285,17 +285,24 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
if (ent->device != 0x182) {
if ((pmr & SIS_PMR_COMBINED) == 0) {
dev_printk(KERN_INFO, &pdev->dev,
"Detected SiS 180/181 chipset in SATA mode\n");
"Detected SiS 180/181/964 chipset in SATA mode\n");
port2_start = 64;
}
else {
dev_printk(KERN_INFO, &pdev->dev,
"Detected SiS 180/181 chipset in combined mode\n");
port2_start=0;
pi.flags |= ATA_FLAG_SLAVE_POSS;
}
}
else {
dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 182 chipset\n");
pci_read_config_dword ( pdev, 0x6C, &val);
if (val & (1L << 31)) {
dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 182/965 chipset\n");
pi.flags |= ATA_FLAG_SLAVE_POSS;
}
else
dev_printk(KERN_INFO, &pdev->dev, "Detected SiS 182/965L chipset\n");
port2_start = 0x20;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment