extcon: arizona: Factor out microphone and button detection

Continue refactoring the microphone detect handling by factoring
out the handling for microphone detection and button detection
into separate functions. This both makes the code a little clearer
and prepares for some planned future refactoring to make the state
handling in the driver more explicit.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>

drivers/extcon/extcon-arizona.c

@@ -872,38 +872,18 @@ static int arizona_micd_read(struct arizona_extcon_info *info)
 	return val;
 }
 
-static void arizona_micd_detect(struct work_struct *work)
+static int arizona_micdet_reading(void *priv)
 {
-	struct arizona_extcon_info *info = container_of(work,
-						struct arizona_extcon_info,
-						micd_detect_work.work);
+	struct arizona_extcon_info *info = priv;
 	struct arizona *arizona = info->arizona;
-	unsigned int val = 0, lvl;
-	int ret, i, key;
-
-	cancel_delayed_work_sync(&info->micd_timeout_work);
-
-	mutex_lock(&info->lock);
-
-	/* If the cable was removed while measuring ignore the result */
-	ret = extcon_get_state(info->edev, EXTCON_MECHANICAL);
-	if (ret < 0) {
-		dev_err(arizona->dev, "Failed to check cable state: %d\n",
-				ret);
-		mutex_unlock(&info->lock);
-		return;
-	} else if (!ret) {
-		dev_dbg(arizona->dev, "Ignoring MICDET for removed cable\n");
-		mutex_unlock(&info->lock);
-		return;
-	}
+	int ret, val;
 
 	if (info->detecting && arizona->pdata.micd_software_compare)
 		ret = arizona_micd_adc_read(info);
 	else
 		ret = arizona_micd_read(info);
 	if (ret < 0)
-		goto handled;
+		return ret;
 
 	val = ret;
 
@@ -913,11 +893,11 @@ static void arizona_micd_detect(struct work_struct *work)
 		info->mic = false;
 		info->detecting = false;
 		arizona_identify_headphone(info);
-		goto handled;
+		return 0;
 	}
 
 	/* If we got a high impedence we should have a headset, report it. */
-	if (info->detecting && (val & ARIZONA_MICD_LVL_8)) {
+	if (val & ARIZONA_MICD_LVL_8) {
 		info->mic = true;
 		info->detecting = false;
 
@@ -936,7 +916,7 @@ static void arizona_micd_detect(struct work_struct *work)
 				ret);
 		}
 
-		goto handled;
+		return 0;
 	}
 
 	/* If we detected a lower impedence during initial startup
@@ -945,7 +925,7 @@ static void arizona_micd_detect(struct work_struct *work)
 	 * plain headphones.  If both polarities report a low
 	 * impedence then give up and report headphones.
 	 */
-	if (info->detecting && (val & MICD_LVL_1_TO_7)) {
+	if (val & MICD_LVL_1_TO_7) {
 		if (info->jack_flips >= info->micd_num_modes * 10) {
 			dev_dbg(arizona->dev, "Detected HP/line\n");
 
@@ -959,11 +939,43 @@ static void arizona_micd_detect(struct work_struct *work)
 			arizona_extcon_set_mode(info, info->micd_mode);
 
 			info->jack_flips++;
+
+			if (arizona->pdata.micd_software_compare)
+				regmap_update_bits(arizona->regmap,
+						   ARIZONA_MIC_DETECT_1,
+						   ARIZONA_MICD_ENA,
+						   ARIZONA_MICD_ENA);
+
+			queue_delayed_work(system_power_efficient_wq,
+					   &info->micd_timeout_work,
+					   msecs_to_jiffies(arizona->pdata.micd_timeout));
 		}
 
-		goto handled;
+		return 0;
 	}
 
+	/*
+	 * If we're still detecting and we detect a short then we've
+	 * got a headphone.
+	 */
+	dev_dbg(arizona->dev, "Headphone detected\n");
+	info->detecting = false;
+
+	arizona_identify_headphone(info);
+
+	return 0;
+}
+
+static int arizona_button_reading(void *priv)
+{
+	struct arizona_extcon_info *info = priv;
+	struct arizona *arizona = info->arizona;
+	int val, key, lvl, i;
+
+	val = arizona_micd_read(info);
+	if (val < 0)
+		return val;
+
 	/*
 	 * If we're still detecting and we detect a short then we've
 	 * got a headphone.  Otherwise it's a button press.
@@ -986,11 +998,6 @@ static void arizona_micd_detect(struct work_struct *work)
 			} else {
 				dev_err(arizona->dev, "Button out of range\n");
 			}
-		} else if (info->detecting) {
-			dev_dbg(arizona->dev, "Headphone detected\n");
-			info->detecting = false;
-
-			arizona_identify_headphone(info);
 		} else {
 			dev_warn(arizona->dev, "Button with no mic: %x\n",
 				 val);
@@ -1004,19 +1011,39 @@ static void arizona_micd_detect(struct work_struct *work)
 		arizona_extcon_pulse_micbias(info);
 	}
 
-handled:
-	if (info->detecting) {
-		if (arizona->pdata.micd_software_compare)
-			regmap_update_bits(arizona->regmap,
-					   ARIZONA_MIC_DETECT_1,
-					   ARIZONA_MICD_ENA,
-					   ARIZONA_MICD_ENA);
+	return 0;
+}
 
-		queue_delayed_work(system_power_efficient_wq,
-				   &info->micd_timeout_work,
-				   msecs_to_jiffies(arizona->pdata.micd_timeout));
+static void arizona_micd_detect(struct work_struct *work)
+{
+	struct arizona_extcon_info *info = container_of(work,
+						struct arizona_extcon_info,
+						micd_detect_work.work);
+	struct arizona *arizona = info->arizona;
+	int ret;
+
+	cancel_delayed_work_sync(&info->micd_timeout_work);
+
+	mutex_lock(&info->lock);
+
+	/* If the cable was removed while measuring ignore the result */
+	ret = extcon_get_state(info->edev, EXTCON_MECHANICAL);
+	if (ret < 0) {
+		dev_err(arizona->dev, "Failed to check cable state: %d\n",
+				ret);
+		mutex_unlock(&info->lock);
+		return;
+	} else if (!ret) {
+		dev_dbg(arizona->dev, "Ignoring MICDET for removed cable\n");
+		mutex_unlock(&info->lock);
+		return;
 	}
 
+	if (info->detecting)
+		arizona_micdet_reading(info);
+	else
+		arizona_button_reading(info);
+
 	pm_runtime_mark_last_busy(info->dev);
 	mutex_unlock(&info->lock);
 }