Commit 4d4a339d authored by Eric Miao's avatar Eric Miao

[ARM] mmp: move mmp2 specific timer code to mmp2.c

Signed-off-by: default avatarEric Miao <eric.y.miao@gmail.com>
parent 8022887c
...@@ -17,6 +17,7 @@ ...@@ -17,6 +17,7 @@
#include <asm/hardware/cache-tauros2.h> #include <asm/hardware/cache-tauros2.h>
#include <asm/mach/time.h>
#include <mach/addr-map.h> #include <mach/addr-map.h>
#include <mach/regs-apbc.h> #include <mach/regs-apbc.h>
#include <mach/regs-apmu.h> #include <mach/regs-apmu.h>
...@@ -158,6 +159,26 @@ static int __init mmp2_init(void) ...@@ -158,6 +159,26 @@ static int __init mmp2_init(void)
} }
postcore_initcall(mmp2_init); postcore_initcall(mmp2_init);
static void __init mmp2_timer_init(void)
{
unsigned long clk_rst;
__raw_writel(APBC_APBCLK | APBC_RST, APBC_MMP2_TIMERS);
/*
* enable bus/functional clock, enable 6.5MHz (divider 4),
* release reset
*/
clk_rst = APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1);
__raw_writel(clk_rst, APBC_MMP2_TIMERS);
timer_init(IRQ_MMP2_TIMER1);
}
struct sys_timer mmp2_timer = {
.init = mmp2_timer_init,
};
/* on-chip devices */ /* on-chip devices */
MMP2_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4030000, 0x30, 4, 5); MMP2_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4030000, 0x30, 4, 5);
MMP2_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4017000, 0x30, 20, 21); MMP2_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4017000, 0x30, 20, 21);
......
...@@ -200,24 +200,3 @@ void __init timer_init(int irq) ...@@ -200,24 +200,3 @@ void __init timer_init(int irq)
clocksource_register(&cksrc); clocksource_register(&cksrc);
clockevents_register_device(&ckevt); clockevents_register_device(&ckevt);
} }
static void __init mmp2_timer_init(void)
{
unsigned long clk_rst;
__raw_writel(APBC_APBCLK | APBC_RST, APBC_MMP2_TIMERS);
/*
* enable bus/functional clock, enable 6.5MHz (divider 4),
* release reset
*/
clk_rst = APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1);
__raw_writel(clk_rst, APBC_MMP2_TIMERS);
timer_init(IRQ_MMP2_TIMER1);
}
struct sys_timer mmp2_timer = {
.init = mmp2_timer_init,
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment