dt-bindings: net: dp83869: Add TI dp83869 phy

Add dt bindings for the TI dp83869 Gigabit ethernet phy
device.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
CC: Rob Herring <robh+dt@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/devicetree/bindings/net/ti,dp83869.yaml

+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2019 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/net/ti,dp83869.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: TI DP83869 ethernet PHY
+
+allOf:
+  - $ref: "ethernet-controller.yaml#"
+
+maintainers:
+  - Dan Murphy <dmurphy@ti.com>
+
+description: |
+  The DP83869HM device is a robust, fully-featured Gigabit (PHY) transceiver
+  with integrated PMD sublayers that supports 10BASE-Te, 100BASE-TX and
+  1000BASE-T Ethernet protocols. The DP83869 also supports 1000BASE-X and
+  100BASE-FX Fiber protocols.
+  This device interfaces to the MAC layer through Reduced GMII (RGMII) and
+  SGMII The DP83869HM supports Media Conversion in Managed mode. In this mode,
+  the DP83869HM can run 1000BASE-X-to-1000BASE-T and 100BASE-FX-to-100BASE-TX
+  conversions.  The DP83869HM can also support Bridge Conversion from RGMII to
+  SGMII and SGMII to RGMII.
+
+  Specifications about the charger can be found at:
+    http://www.ti.com/lit/ds/symlink/dp83869hm.pdf
+
+properties:
+  reg:
+    maxItems: 1
+
+  ti,min-output-impedance:
+    type: boolean
+    description: |
+       MAC Interface Impedance control to set the programmable output impedance
+       to a minimum value (35 ohms).
+
+  ti,max-output-impedance:
+    type: boolean
+    description: |
+       MAC Interface Impedance control to set the programmable output impedance
+       to a maximum value (70 ohms).
+
+  tx-fifo-depth:
+    $ref: /schemas/types.yaml#definitions/uint32
+    description: |
+       Transmitt FIFO depth see dt-bindings/net/ti-dp83869.h for values
+
+  rx-fifo-depth:
+    $ref: /schemas/types.yaml#definitions/uint32
+    description: |
+       Receive FIFO depth see dt-bindings/net/ti-dp83869.h for values
+
+  ti,clk-output-sel:
+    $ref: /schemas/types.yaml#definitions/uint32
+    description: |
+       Muxing option for CLK_OUT pin see dt-bindings/net/ti-dp83869.h for values.
+
+  ti,op-mode:
+    $ref: /schemas/types.yaml#definitions/uint32
+    description: |
+       Operational mode for the PHY.  If this is not set then the operational
+       mode is set by the straps. see dt-bindings/net/ti-dp83869.h for values
+
+required:
+  - reg
+
+examples:
+  - |
+    #include <dt-bindings/net/ti-dp83869.h>
+    mdio0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      ethphy0: ethernet-phy@0 {
+        reg = <0>;
+        tx-fifo-depth = <DP83869_PHYCR_FIFO_DEPTH_4_B_NIB>;
+        rx-fifo-depth = <DP83869_PHYCR_FIFO_DEPTH_4_B_NIB>;
+        ti,op-mode = <DP83869_RGMII_COPPER_ETHERNET>;
+        ti,max-output-impedance = "true";
+        ti,clk-output-sel = <DP83869_CLK_O_SEL_CHN_A_RCLK>;
+      };
+    };

include/dt-bindings/net/ti-dp83869.h

+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Device Tree constants for the Texas Instruments DP83869 PHY
+ *
+ * Author: Dan Murphy <dmurphy@ti.com>
+ *
+ * Copyright:   (C) 2019 Texas Instruments, Inc.
+ */
+
+#ifndef _DT_BINDINGS_TI_DP83869_H
+#define _DT_BINDINGS_TI_DP83869_H
+
+/* PHY CTRL bits */
+#define DP83869_PHYCR_FIFO_DEPTH_3_B_NIB	0x00
+#define DP83869_PHYCR_FIFO_DEPTH_4_B_NIB	0x01
+#define DP83869_PHYCR_FIFO_DEPTH_6_B_NIB	0x02
+#define DP83869_PHYCR_FIFO_DEPTH_8_B_NIB	0x03
+
+/* IO_MUX_CFG - Clock output selection */
+#define DP83869_CLK_O_SEL_CHN_A_RCLK		0x0
+#define DP83869_CLK_O_SEL_CHN_B_RCLK		0x1
+#define DP83869_CLK_O_SEL_CHN_C_RCLK		0x2
+#define DP83869_CLK_O_SEL_CHN_D_RCLK		0x3
+#define DP83869_CLK_O_SEL_CHN_A_RCLK_DIV5	0x4
+#define DP83869_CLK_O_SEL_CHN_B_RCLK_DIV5	0x5
+#define DP83869_CLK_O_SEL_CHN_C_RCLK_DIV5	0x6
+#define DP83869_CLK_O_SEL_CHN_D_RCLK_DIV5	0x7
+#define DP83869_CLK_O_SEL_CHN_A_TCLK		0x8
+#define DP83869_CLK_O_SEL_CHN_B_TCLK		0x9
+#define DP83869_CLK_O_SEL_CHN_C_TCLK		0xa
+#define DP83869_CLK_O_SEL_CHN_D_TCLK		0xb
+#define DP83869_CLK_O_SEL_REF_CLK		0xc
+
+#define DP83869_RGMII_COPPER_ETHERNET		0x00
+#define DP83869_RGMII_1000_BASE			0x01
+#define DP83869_RGMII_100_BASE			0x02
+#define DP83869_RGMII_SGMII_BRIDGE		0x03
+#define DP83869_1000M_MEDIA_CONVERT		0x04
+#define DP83869_100M_MEDIA_CONVERT		0x05
+#define DP83869_SGMII_COPPER_ETHERNET		0x06
+
+#endif