Merge branch 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm

Pull ARM cpufreq drivers updates for v5.7 from Viresh Kumar:

"This pull request contains:

 - update to imx cpufreq drivers to improve their support (Anson Huang,
   Christoph Niedermaier, and Peng Fan).

 - Update to qcom cpufreq to support other krait based SoCs (Ansuel
   Smith).

 - Update ti cpufreq driver to support OPP_PLUS (Lokesh Vutla).

 - Update cpufreq-dt driver to allow platfoem specific intermediate
   callbacks (Peng Fan)."

* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
  cpufreq: qcom: Add support for krait based socs
  cpufreq: imx6q-cpufreq: Improve the logic of -EPROBE_DEFER handling
  cpufreq: dt: Allow platform specific intermediate callbacks
  cpufreq: imx-cpufreq-dt: Correct i.MX8MP's market segment fuse location
  cpufreq: imx6q: read OCOTP through nvmem for imx6q
  cpufreq: imx6q: fix error handling
  cpufreq: imx-cpufreq-dt: Add "cpu-supply" property check
  cpufreq: ti-cpufreq: Add support for OPP_PLUS
  cpufreq: imx6q: Fixes unwanted cpu overclocking on i.MX6ULL

Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt

@@ -19,7 +19,8 @@ In 'cpu' nodes:
 
 In 'operating-points-v2' table:
 - compatible: Should be
-	- 'operating-points-v2-kryo-cpu' for apq8096 and msm8996.
+	- 'operating-points-v2-kryo-cpu' for apq8096, msm8996, msm8974,
+					     apq8064, ipq8064, msm8960 and ipq8074.
 
 Optional properties:
 --------------------

drivers/cpufreq/Kconfig.arm

@@ -128,7 +128,7 @@ config ARM_OMAP2PLUS_CPUFREQ
 
 config ARM_QCOM_CPUFREQ_NVMEM
 	tristate "Qualcomm nvmem based CPUFreq"
-	depends on ARM64
+	depends on ARCH_QCOM
 	depends on QCOM_QFPROM
 	depends on QCOM_SMEM
 	select PM_OPP

drivers/cpufreq/cpufreq-dt-platdev.c

@@ -141,6 +141,11 @@ static const struct of_device_id blacklist[] __initconst = {
 	{ .compatible = "ti,dra7", },
 	{ .compatible = "ti,omap3", },
 
+	{ .compatible = "qcom,ipq8064", },
+	{ .compatible = "qcom,apq8064", },
+	{ .compatible = "qcom,msm8974", },
+	{ .compatible = "qcom,msm8960", },
+
 	{ }
 };
 

drivers/cpufreq/cpufreq-dt.c

@@ -363,6 +363,10 @@ static int dt_cpufreq_probe(struct platform_device *pdev)
 		dt_cpufreq_driver.resume = data->resume;
 		if (data->suspend)
 			dt_cpufreq_driver.suspend = data->suspend;
+		if (data->get_intermediate) {
+			dt_cpufreq_driver.target_intermediate = data->target_intermediate;
+			dt_cpufreq_driver.get_intermediate = data->get_intermediate;
+		}
 	}
 
 	ret = cpufreq_register_driver(&dt_cpufreq_driver);

drivers/cpufreq/cpufreq-dt.h

@@ -14,6 +14,10 @@ struct cpufreq_policy;
 struct cpufreq_dt_platform_data {
 	bool have_governor_per_policy;
 
+	unsigned int	(*get_intermediate)(struct cpufreq_policy *policy,
+					    unsigned int index);
+	int		(*target_intermediate)(struct cpufreq_policy *policy,
+					       unsigned int index);
 	int (*suspend)(struct cpufreq_policy *policy);
 	int (*resume)(struct cpufreq_policy *policy);
 };

drivers/cpufreq/imx-cpufreq-dt.c

@@ -19,6 +19,8 @@
 #define IMX8MN_OCOTP_CFG3_SPEED_GRADE_MASK	(0xf << 8)
 #define OCOTP_CFG3_MKT_SEGMENT_SHIFT    6
 #define OCOTP_CFG3_MKT_SEGMENT_MASK     (0x3 << 6)
+#define IMX8MP_OCOTP_CFG3_MKT_SEGMENT_SHIFT    5
+#define IMX8MP_OCOTP_CFG3_MKT_SEGMENT_MASK     (0x3 << 5)
 
 /* cpufreq-dt device registered by imx-cpufreq-dt */
 static struct platform_device *cpufreq_dt_pdev;
@@ -31,6 +33,9 @@ static int imx_cpufreq_dt_probe(struct platform_device *pdev)
 	int speed_grade, mkt_segment;
 	int ret;
 
+	if (!of_find_property(cpu_dev->of_node, "cpu-supply", NULL))
+		return -ENODEV;
+
 	ret = nvmem_cell_read_u32(cpu_dev, "speed_grade", &cell_value);
 	if (ret)
 		return ret;
@@ -42,7 +47,13 @@ static int imx_cpufreq_dt_probe(struct platform_device *pdev)
 	else
 		speed_grade = (cell_value & OCOTP_CFG3_SPEED_GRADE_MASK)
 			      >> OCOTP_CFG3_SPEED_GRADE_SHIFT;
-	mkt_segment = (cell_value & OCOTP_CFG3_MKT_SEGMENT_MASK) >> OCOTP_CFG3_MKT_SEGMENT_SHIFT;
+
+	if (of_machine_is_compatible("fsl,imx8mp"))
+		mkt_segment = (cell_value & IMX8MP_OCOTP_CFG3_MKT_SEGMENT_MASK)
+			       >> IMX8MP_OCOTP_CFG3_MKT_SEGMENT_SHIFT;
+	else
+		mkt_segment = (cell_value & OCOTP_CFG3_MKT_SEGMENT_MASK)
+			       >> OCOTP_CFG3_MKT_SEGMENT_SHIFT;
 
 	/*
 	 * Early samples without fuses written report "0 0" which may NOT

drivers/cpufreq/imx6q-cpufreq.c

@@ -216,31 +216,41 @@ static struct cpufreq_driver imx6q_cpufreq_driver = {
 #define OCOTP_CFG3_SPEED_996MHZ		0x2
 #define OCOTP_CFG3_SPEED_852MHZ		0x1
 
-static void imx6q_opp_check_speed_grading(struct device *dev)
+static int imx6q_opp_check_speed_grading(struct device *dev)
 {
 	struct device_node *np;
 	void __iomem *base;
 	u32 val;
+	int ret;
 
-	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-ocotp");
-	if (!np)
-		return;
+	if (of_find_property(dev->of_node, "nvmem-cells", NULL)) {
+		ret = nvmem_cell_read_u32(dev, "speed_grade", &val);
+		if (ret)
+			return ret;
+	} else {
+		np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-ocotp");
+		if (!np)
+			return -ENOENT;
 
-	base = of_iomap(np, 0);
-	if (!base) {
-		dev_err(dev, "failed to map ocotp\n");
-		goto put_node;
+		base = of_iomap(np, 0);
+		of_node_put(np);
+		if (!base) {
+			dev_err(dev, "failed to map ocotp\n");
+			return -EFAULT;
+		}
+
+		/*
+		 * SPEED_GRADING[1:0] defines the max speed of ARM:
+		 * 2b'11: 1200000000Hz;
+		 * 2b'10: 996000000Hz;
+		 * 2b'01: 852000000Hz; -- i.MX6Q Only, exclusive with 996MHz.
+		 * 2b'00: 792000000Hz;
+		 * We need to set the max speed of ARM according to fuse map.
+		 */
+		val = readl_relaxed(base + OCOTP_CFG3);
+		iounmap(base);
 	}
 
-	/*
-	 * SPEED_GRADING[1:0] defines the max speed of ARM:
-	 * 2b'11: 1200000000Hz;
-	 * 2b'10: 996000000Hz;
-	 * 2b'01: 852000000Hz; -- i.MX6Q Only, exclusive with 996MHz.
-	 * 2b'00: 792000000Hz;
-	 * We need to set the max speed of ARM according to fuse map.
-	 */
-	val = readl_relaxed(base + OCOTP_CFG3);
 	val >>= OCOTP_CFG3_SPEED_SHIFT;
 	val &= 0x3;
 
@@ -257,9 +267,8 @@ static void imx6q_opp_check_speed_grading(struct device *dev)
 			if (dev_pm_opp_disable(dev, 1200000000))
 				dev_warn(dev, "failed to disable 1.2GHz OPP\n");
 	}
-	iounmap(base);
-put_node:
-	of_node_put(np);
+
+	return 0;
 }
 
 #define OCOTP_CFG3_6UL_SPEED_696MHZ	0x2
@@ -280,6 +289,9 @@ static int imx6ul_opp_check_speed_grading(struct device *dev)
 		void __iomem *base;
 
 		np = of_find_compatible_node(NULL, NULL, "fsl,imx6ul-ocotp");
+		if (!np)
+			np = of_find_compatible_node(NULL, NULL,
+						     "fsl,imx6ull-ocotp");
 		if (!np)
 			return -ENOENT;
 
@@ -378,23 +390,22 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev)
 		goto put_reg;
 	}
 
+	/* Because we have added the OPPs here, we must free them */
+	free_opp = true;
+
 	if (of_machine_is_compatible("fsl,imx6ul") ||
 	    of_machine_is_compatible("fsl,imx6ull")) {
 		ret = imx6ul_opp_check_speed_grading(cpu_dev);
-		if (ret) {
-			if (ret == -EPROBE_DEFER)
-				goto put_node;
-
+	} else {
+		ret = imx6q_opp_check_speed_grading(cpu_dev);
+	}
+	if (ret) {
+		if (ret != -EPROBE_DEFER)
 			dev_err(cpu_dev, "failed to read ocotp: %d\n",
 				ret);
-			goto put_node;
-		}
-	} else {
-		imx6q_opp_check_speed_grading(cpu_dev);
+		goto out_free_opp;
 	}
 
-	/* Because we have added the OPPs here, we must free them */
-	free_opp = true;
 	num = dev_pm_opp_get_opp_count(cpu_dev);
 	if (num < 0) {
 		ret = num;

drivers/cpufreq/qcom-cpufreq-nvmem.c

@@ -49,12 +49,14 @@ struct qcom_cpufreq_drv;
 struct qcom_cpufreq_match_data {
 	int (*get_version)(struct device *cpu_dev,
 			   struct nvmem_cell *speedbin_nvmem,
+			   char **pvs_name,
 			   struct qcom_cpufreq_drv *drv);
 	const char **genpd_names;
 };
 
 struct qcom_cpufreq_drv {
-	struct opp_table **opp_tables;
+	struct opp_table **names_opp_tables;
+	struct opp_table **hw_opp_tables;
 	struct opp_table **genpd_opp_tables;
 	u32 versions;
 	const struct qcom_cpufreq_match_data *data;
@@ -62,6 +64,84 @@ struct qcom_cpufreq_drv {
 
 static struct platform_device *cpufreq_dt_pdev, *cpufreq_pdev;
 
+static void get_krait_bin_format_a(struct device *cpu_dev,
+					  int *speed, int *pvs, int *pvs_ver,
+					  struct nvmem_cell *pvs_nvmem, u8 *buf)
+{
+	u32 pte_efuse;
+
+	pte_efuse = *((u32 *)buf);
+
+	*speed = pte_efuse & 0xf;
+	if (*speed == 0xf)
+		*speed = (pte_efuse >> 4) & 0xf;
+
+	if (*speed == 0xf) {
+		*speed = 0;
+		dev_warn(cpu_dev, "Speed bin: Defaulting to %d\n", *speed);
+	} else {
+		dev_dbg(cpu_dev, "Speed bin: %d\n", *speed);
+	}
+
+	*pvs = (pte_efuse >> 10) & 0x7;
+	if (*pvs == 0x7)
+		*pvs = (pte_efuse >> 13) & 0x7;
+
+	if (*pvs == 0x7) {
+		*pvs = 0;
+		dev_warn(cpu_dev, "PVS bin: Defaulting to %d\n", *pvs);
+	} else {
+		dev_dbg(cpu_dev, "PVS bin: %d\n", *pvs);
+	}
+}
+
+static void get_krait_bin_format_b(struct device *cpu_dev,
+					  int *speed, int *pvs, int *pvs_ver,
+					  struct nvmem_cell *pvs_nvmem, u8 *buf)
+{
+	u32 pte_efuse, redundant_sel;
+
+	pte_efuse = *((u32 *)buf);
+	redundant_sel = (pte_efuse >> 24) & 0x7;
+
+	*pvs_ver = (pte_efuse >> 4) & 0x3;
+
+	switch (redundant_sel) {
+	case 1:
+		*pvs = ((pte_efuse >> 28) & 0x8) | ((pte_efuse >> 6) & 0x7);
+		*speed = (pte_efuse >> 27) & 0xf;
+		break;
+	case 2:
+		*pvs = (pte_efuse >> 27) & 0xf;
+		*speed = pte_efuse & 0x7;
+		break;
+	default:
+		/* 4 bits of PVS are in efuse register bits 31, 8-6. */
+		*pvs = ((pte_efuse >> 28) & 0x8) | ((pte_efuse >> 6) & 0x7);
+		*speed = pte_efuse & 0x7;
+	}
+
+	/* Check SPEED_BIN_BLOW_STATUS */
+	if (pte_efuse & BIT(3)) {
+		dev_dbg(cpu_dev, "Speed bin: %d\n", *speed);
+	} else {
+		dev_warn(cpu_dev, "Speed bin not set. Defaulting to 0!\n");
+		*speed = 0;
+	}
+
+	/* Check PVS_BLOW_STATUS */
+	pte_efuse = *(((u32 *)buf) + 4);
+	pte_efuse &= BIT(21);
+	if (pte_efuse) {
+		dev_dbg(cpu_dev, "PVS bin: %d\n", *pvs);
+	} else {
+		dev_warn(cpu_dev, "PVS bin not set. Defaulting to 0!\n");
+		*pvs = 0;
+	}
+
+	dev_dbg(cpu_dev, "PVS version: %d\n", *pvs_ver);
+}
+
 static enum _msm8996_version qcom_cpufreq_get_msm_id(void)
 {
 	size_t len;
@@ -93,11 +173,13 @@ static enum _msm8996_version qcom_cpufreq_get_msm_id(void)
 
 static int qcom_cpufreq_kryo_name_version(struct device *cpu_dev,
 					  struct nvmem_cell *speedbin_nvmem,
+					  char **pvs_name,
 					  struct qcom_cpufreq_drv *drv)
 {
 	size_t len;
 	u8 *speedbin;
 	enum _msm8996_version msm8996_version;
+	*pvs_name = NULL;
 
 	msm8996_version = qcom_cpufreq_get_msm_id();
 	if (NUM_OF_MSM8996_VERSIONS == msm8996_version) {
@@ -125,10 +207,51 @@ static int qcom_cpufreq_kryo_name_version(struct device *cpu_dev,
 	return 0;
 }
 
+static int qcom_cpufreq_krait_name_version(struct device *cpu_dev,
+					   struct nvmem_cell *speedbin_nvmem,
+					   char **pvs_name,
+					   struct qcom_cpufreq_drv *drv)
+{
+	int speed = 0, pvs = 0, pvs_ver = 0;
+	u8 *speedbin;
+	size_t len;
+
+	speedbin = nvmem_cell_read(speedbin_nvmem, &len);
+
+	if (IS_ERR(speedbin))
+		return PTR_ERR(speedbin);
+
+	switch (len) {
+	case 4:
+		get_krait_bin_format_a(cpu_dev, &speed, &pvs, &pvs_ver,
+				       speedbin_nvmem, speedbin);
+		break;
+	case 8:
+		get_krait_bin_format_b(cpu_dev, &speed, &pvs, &pvs_ver,
+				       speedbin_nvmem, speedbin);
+		break;
+	default:
+		dev_err(cpu_dev, "Unable to read nvmem data. Defaulting to 0!\n");
+		return -ENODEV;
+	}
+
+	snprintf(*pvs_name, sizeof("speedXX-pvsXX-vXX"), "speed%d-pvs%d-v%d",
+		 speed, pvs, pvs_ver);
+
+	drv->versions = (1 << speed);
+
+	kfree(speedbin);
+	return 0;
+}
+
 static const struct qcom_cpufreq_match_data match_data_kryo = {
 	.get_version = qcom_cpufreq_kryo_name_version,
 };
 
+static const struct qcom_cpufreq_match_data match_data_krait = {
+	.get_version = qcom_cpufreq_krait_name_version,
+};
+
 static const char *qcs404_genpd_names[] = { "cpr", NULL };
 
 static const struct qcom_cpufreq_match_data match_data_qcs404 = {
@@ -141,6 +264,7 @@ static int qcom_cpufreq_probe(struct platform_device *pdev)
 	struct nvmem_cell *speedbin_nvmem;
 	struct device_node *np;
 	struct device *cpu_dev;
+	char *pvs_name = "speedXX-pvsXX-vXX";
 	unsigned cpu;
 	const struct of_device_id *match;
 	int ret;
@@ -153,7 +277,7 @@ static int qcom_cpufreq_probe(struct platform_device *pdev)
 	if (!np)
 		return -ENOENT;
 
-	ret = of_device_is_compatible(np, "operating-points-v2-kryo-cpu");
+	ret = of_device_is_compatible(np, "operating-points-v2-qcom-cpu");
 	if (!ret) {
 		of_node_put(np);
 		return -ENOENT;
@@ -181,7 +305,8 @@ static int qcom_cpufreq_probe(struct platform_device *pdev)
 			goto free_drv;
 		}
 
-		ret = drv->data->get_version(cpu_dev, speedbin_nvmem, drv);
+		ret = drv->data->get_version(cpu_dev,
+							speedbin_nvmem, &pvs_name, drv);
 		if (ret) {
 			nvmem_cell_put(speedbin_nvmem);
 			goto free_drv;
@@ -190,12 +315,20 @@ static int qcom_cpufreq_probe(struct platform_device *pdev)
 	}
 	of_node_put(np);
 
-	drv->opp_tables = kcalloc(num_possible_cpus(), sizeof(*drv->opp_tables),
+	drv->names_opp_tables = kcalloc(num_possible_cpus(),
+				  sizeof(*drv->names_opp_tables),
 				  GFP_KERNEL);
-	if (!drv->opp_tables) {
+	if (!drv->names_opp_tables) {
 		ret = -ENOMEM;
 		goto free_drv;
 	}
+	drv->hw_opp_tables = kcalloc(num_possible_cpus(),
+				  sizeof(*drv->hw_opp_tables),
+				  GFP_KERNEL);
+	if (!drv->hw_opp_tables) {
+		ret = -ENOMEM;
+		goto free_opp_names;
+	}
 
 	drv->genpd_opp_tables = kcalloc(num_possible_cpus(),
 					sizeof(*drv->genpd_opp_tables),
@@ -213,11 +346,23 @@ static int qcom_cpufreq_probe(struct platform_device *pdev)
 		}
 
 		if (drv->data->get_version) {
-			drv->opp_tables[cpu] =
-				dev_pm_opp_set_supported_hw(cpu_dev,
-							    &drv->versions, 1);
-			if (IS_ERR(drv->opp_tables[cpu])) {
-				ret = PTR_ERR(drv->opp_tables[cpu]);
+
+			if (pvs_name) {
+				drv->names_opp_tables[cpu] = dev_pm_opp_set_prop_name(
+								     cpu_dev,
+								     pvs_name);
+				if (IS_ERR(drv->names_opp_tables[cpu])) {
+					ret = PTR_ERR(drv->names_opp_tables[cpu]);
+					dev_err(cpu_dev, "Failed to add OPP name %s\n",
+						pvs_name);
+					goto free_opp;
+				}
+			}
+
+			drv->hw_opp_tables[cpu] = dev_pm_opp_set_supported_hw(
+									 cpu_dev, &drv->versions, 1);
+			if (IS_ERR(drv->hw_opp_tables[cpu])) {
+				ret = PTR_ERR(drv->hw_opp_tables[cpu]);
 				dev_err(cpu_dev,
 					"Failed to set supported hardware\n");
 				goto free_genpd_opp;
@@ -259,11 +404,18 @@ static int qcom_cpufreq_probe(struct platform_device *pdev)
 	kfree(drv->genpd_opp_tables);
 free_opp:
 	for_each_possible_cpu(cpu) {
-		if (IS_ERR_OR_NULL(drv->opp_tables[cpu]))
+		if (IS_ERR_OR_NULL(drv->names_opp_tables[cpu]))
+			break;
+		dev_pm_opp_put_prop_name(drv->names_opp_tables[cpu]);
+	}
+	for_each_possible_cpu(cpu) {
+		if (IS_ERR_OR_NULL(drv->hw_opp_tables[cpu]))
 			break;
-		dev_pm_opp_put_supported_hw(drv->opp_tables[cpu]);
+		dev_pm_opp_put_supported_hw(drv->hw_opp_tables[cpu]);
 	}
-	kfree(drv->opp_tables);
+	kfree(drv->hw_opp_tables);
+free_opp_names:
+	kfree(drv->names_opp_tables);
 free_drv:
 	kfree(drv);
 
@@ -278,13 +430,16 @@ static int qcom_cpufreq_remove(struct platform_device *pdev)
 	platform_device_unregister(cpufreq_dt_pdev);
 
 	for_each_possible_cpu(cpu) {
-		if (drv->opp_tables[cpu])
-			dev_pm_opp_put_supported_hw(drv->opp_tables[cpu]);
+		if (drv->names_opp_tables[cpu])
+			dev_pm_opp_put_supported_hw(drv->names_opp_tables[cpu]);
+		if (drv->hw_opp_tables[cpu])
+			dev_pm_opp_put_supported_hw(drv->hw_opp_tables[cpu]);
 		if (drv->genpd_opp_tables[cpu])
 			dev_pm_opp_detach_genpd(drv->genpd_opp_tables[cpu]);
 	}
 
-	kfree(drv->opp_tables);
+	kfree(drv->names_opp_tables);
+	kfree(drv->hw_opp_tables);
 	kfree(drv->genpd_opp_tables);
 	kfree(drv);
 
@@ -303,6 +458,10 @@ static const struct of_device_id qcom_cpufreq_match_list[] __initconst = {
 	{ .compatible = "qcom,apq8096", .data = &match_data_kryo },
 	{ .compatible = "qcom,msm8996", .data = &match_data_kryo },
 	{ .compatible = "qcom,qcs404", .data = &match_data_qcs404 },
+	{ .compatible = "qcom,ipq8064", .data = &match_data_krait },
+	{ .compatible = "qcom,apq8064", .data = &match_data_krait },
+	{ .compatible = "qcom,msm8974", .data = &match_data_krait },
+	{ .compatible = "qcom,msm8960", .data = &match_data_krait },
 	{},
 };
 

drivers/cpufreq/ti-cpufreq.c

@@ -25,11 +25,14 @@
 
 #define DRA7_EFUSE_HAS_OD_MPU_OPP		11
 #define DRA7_EFUSE_HAS_HIGH_MPU_OPP		15
+#define DRA76_EFUSE_HAS_PLUS_MPU_OPP		18
 #define DRA7_EFUSE_HAS_ALL_MPU_OPP		23
+#define DRA76_EFUSE_HAS_ALL_MPU_OPP		24
 
 #define DRA7_EFUSE_NOM_MPU_OPP			BIT(0)
 #define DRA7_EFUSE_OD_MPU_OPP			BIT(1)
 #define DRA7_EFUSE_HIGH_MPU_OPP			BIT(2)
+#define DRA76_EFUSE_PLUS_MPU_OPP		BIT(3)
 
 #define OMAP3_CONTROL_DEVICE_STATUS		0x4800244C
 #define OMAP3_CONTROL_IDCODE			0x4830A204
@@ -80,6 +83,10 @@ static unsigned long dra7_efuse_xlate(struct ti_cpufreq_data *opp_data,
 	 */
 
 	switch (efuse) {
+	case DRA76_EFUSE_HAS_PLUS_MPU_OPP:
+	case DRA76_EFUSE_HAS_ALL_MPU_OPP:
+		calculated_efuse |= DRA76_EFUSE_PLUS_MPU_OPP;
+		/* Fall through */
 	case DRA7_EFUSE_HAS_ALL_MPU_OPP:
 	case DRA7_EFUSE_HAS_HIGH_MPU_OPP:
 		calculated_efuse |= DRA7_EFUSE_HIGH_MPU_OPP;