Blackfin arch: split board selection off into mach subdirs

Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>

arch/blackfin/Kconfig

@@ -221,95 +221,6 @@ config BFIN_SINGLE_CORE
 	depends on !BFIN_DUAL_CORE
 	default y
 
-choice
-	prompt "System type"
-	default BFIN533_STAMP
-	help
-	  Do NOT change the board here.  Please use the top level
-	  configuration to ensure that all the other settings are
-	  correct.
-
-config BFIN527_EZKIT
-	bool "BF527-EZKIT"
-	depends on (BF522 || BF525 || BF527)
-	help
-	  BF533-EZKIT-LITE board Support.
-
-config BFIN533_EZKIT
-	bool "BF533-EZKIT"
-	depends on (BF533 || BF532 || BF531)
-	help
-	  BF533-EZKIT-LITE board Support.
-
-config  BFIN533_STAMP
-	bool "BF533-STAMP"
-	depends on (BF533 || BF532 || BF531)
-	help
-	  BF533-STAMP board Support.
-
-config BFIN537_STAMP
-	bool "BF537-STAMP"
-	depends on (BF537 || BF536 || BF534)
-	help
-	  BF537-STAMP board Support.
-
-config BFIN533_BLUETECHNIX_CM
-	bool "Bluetechnix CM-BF533"
-	depends on (BF533)
-	help
-	  CM-BF533 support for EVAL- and DEV-Board.
-
-config BFIN537_BLUETECHNIX_CM
-	bool "Bluetechnix CM-BF537"
-	depends on (BF537)
-	help
-	  CM-BF537 support for EVAL- and DEV-Board.
-
-config BFIN548_EZKIT
-	bool "BF548-EZKIT"
-	depends on (BF548 || BF549)
-	  help
-	  BFIN548-EZKIT board Support.
-
-config BFIN561_BLUETECHNIX_CM
-	bool "Bluetechnix CM-BF561"
-	depends on (BF561)
-	help
-	  CM-BF561 support for EVAL- and DEV-Board.
-
-config BFIN561_EZKIT
-	bool "BF561-EZKIT"
-	depends on (BF561)
-	help
-	  BF561-EZKIT-LITE board Support.
-
-config BFIN561_TEPLA
-	bool "BF561-TEPLA"
-	depends on (BF561)
-	help
-	 BF561-TEPLA board Support.
-
-config PNAV10
-	bool "PNAV 1.0 board"
-	depends on (BF537)
-	help
-	  PNAV 1.0 board Support.
-
-config H8606_HVSISTEMAS
-        bool "HV Sistemas H8606"
-        depends on (BF532)
-        help
-          HV Sistemas H8606 board support.
-
-config GENERIC_BOARD
-	bool "Custom"
-	depends on (BF537 || BF536 \
-		|| BF534 || BF561 || BF535 || BF533 || BF532 || BF531)
-	help
-	  GENERIC or Custom board Support.
-
-endchoice
-
 config MEM_GENERIC_BOARD
 	bool
 	depends on GENERIC_BOARD

arch/blackfin/mach-bf527/Kconfig

 if (BF52x)
 
+source "arch/blackfin/mach-bf527/boards/Kconfig"
+
 menu "BF527 Specific Configuration"
 
 comment "Alternative Multiplexing Scheme"

arch/blackfin/mach-bf527/boards/Kconfig

+choice
+	prompt "System type"
+	default BFIN527_EZKIT
+	help
+	  Select your board!
+
+config BFIN527_EZKIT
+	bool "BF527-EZKIT"
+	help
+	  BF527-EZKIT-LITE board support.
+
+endchoice

arch/blackfin/mach-bf527/boards/Makefile

 #
-# arch/blackfin/mach-bf532/boards/Makefile
+# arch/blackfin/mach-bf527/boards/Makefile
 #
 
 obj-y                                  += eth_mac.o
 obj-$(CONFIG_BFIN527_EZKIT)            += ezkit.o
-

arch/blackfin/mach-bf533/Kconfig

 if (BF533 || BF532 || BF531)
 
+source "arch/blackfin/mach-bf533/boards/Kconfig"
+
 menu "BF533/2/1 Specific Configuration"
 
 comment "Interrupt Priority Assignment"

arch/blackfin/mach-bf533/boards/Kconfig

+choice
+	prompt "System type"
+	default BFIN533_STAMP
+	help
+	  Select your board!
+
+config BFIN533_EZKIT
+	bool "BF533-EZKIT"
+	help
+	  BF533-EZKIT-LITE board support.
+
+config BFIN533_STAMP
+	bool "BF533-STAMP"
+	help
+	  BF533-STAMP board support.
+
+config BFIN533_BLUETECHNIX_CM
+	bool "Bluetechnix CM-BF533"
+	depends on (BF533)
+	help
+	  CM-BF533 support for EVAL- and DEV-Board.
+
+config H8606_HVSISTEMAS
+	bool "HV Sistemas H8606"
+	depends on (BF532)
+	help
+	  HV Sistemas H8606 board support.
+
+config GENERIC_BF533_BOARD
+	bool "Generic"
+	help
+	  Generic or Custom board support.
+
+endchoice

arch/blackfin/mach-bf533/boards/Makefile

@@ -2,7 +2,7 @@
 # arch/blackfin/mach-bf533/boards/Makefile
 #
 
-obj-$(CONFIG_GENERIC_BOARD)            += generic_board.o
+obj-$(CONFIG_GENERIC_BF533_BOARD)      += generic_board.o
 obj-$(CONFIG_BFIN533_STAMP)            += stamp.o
 obj-$(CONFIG_BFIN533_EZKIT)            += ezkit.o
 obj-$(CONFIG_BFIN533_BLUETECHNIX_CM)   += cm_bf533.o

arch/blackfin/mach-bf537/Kconfig

 if (BF537 || BF534 || BF536)
 
+source "arch/blackfin/mach-bf537/boards/Kconfig"
+
 menu "BF537 Specific Configuration"
 
 comment "Interrupt Priority Assignment"

arch/blackfin/mach-bf537/boards/Kconfig

+choice
+	prompt "System type"
+	default BFIN537_STAMP
+	help
+	  Select your board!
+
+config BFIN537_STAMP
+	bool "BF537-STAMP"
+	help
+	  BF537-STAMP board support.
+
+config BFIN537_BLUETECHNIX_CM
+	bool "Bluetechnix CM-BF537"
+	depends on (BF537)
+	help
+	  CM-BF537 support for EVAL- and DEV-Board.
+
+config PNAV10
+	bool "PNAV board"
+	depends on (BF537)
+	help
+	  PNAV board support.
+
+config GENERIC_BF537_BOARD
+	bool "Generic"
+	help
+	  Generic or Custom board support.
+
+endchoice

arch/blackfin/mach-bf537/boards/Makefile

@@ -3,7 +3,7 @@
 #
 
 obj-y                                  += eth_mac.o
-obj-$(CONFIG_GENERIC_BOARD)		+= generic_board.o
+obj-$(CONFIG_GENERIC_BF537_BOARD)      += generic_board.o
 obj-$(CONFIG_BFIN537_STAMP)            += stamp.o led.o
 obj-$(CONFIG_BFIN537_BLUETECHNIX_CM)   += cm_bf537.o
 obj-$(CONFIG_PNAV10)                   += pnav10.o

arch/blackfin/mach-bf548/Kconfig

 if (BF54x)
 
+source "arch/blackfin/mach-bf548/boards/Kconfig"
+
 menu "BF548 Specific Configuration"
 
 config DEB_DMA_URGENT

arch/blackfin/mach-bf548/boards/Kconfig

+choice
+	prompt "System type"
+	default BFIN548_EZKIT
+	help
+	  Select your board!
+
+config BFIN548_EZKIT
+	bool "BF548-EZKIT"
+	help
+	  BFIN548-EZKIT board support.
+
+endchoice

arch/blackfin/mach-bf561/Kconfig

-if BF561
+if (BF561)
+
+source "arch/blackfin/mach-bf561/boards/Kconfig"
 
 menu "BF561 Specific Configuration"
 

arch/blackfin/mach-bf561/boards/Kconfig

+choice
+	prompt "System type"
+	default BFIN561_EZKIT
+	help
+	  Select your board!
+
+config BFIN561_EZKIT
+	bool "BF561-EZKIT"
+	help
+	  BF561-EZKIT-LITE board support.
+
+config BFIN561_TEPLA
+	bool "BF561-TEPLA"
+	help
+	 BF561-TEPLA board support.
+
+config BFIN561_BLUETECHNIX_CM
+	bool "Bluetechnix CM-BF561"
+	help
+	  CM-BF561 support for EVAL- and DEV-Board.
+
+config GENERIC_BF561_BOARD
+	bool "Generic"
+	help
+	  Generic or Custom board support.
+
+endchoice

arch/blackfin/mach-bf561/boards/Makefile

@@ -2,7 +2,7 @@
 # arch/blackfin/mach-bf561/boards/Makefile
 #
 
-obj-$(CONFIG_GENERIC_BOARD)            += generic_board.o
+obj-$(CONFIG_GENERIC_BF561_BOARD)      += generic_board.o
 obj-$(CONFIG_BFIN561_BLUETECHNIX_CM)   += cm_bf561.o
 obj-$(CONFIG_BFIN561_EZKIT)            += ezkit.o
 obj-$(CONFIG_BFIN561_TEPLA)            += tepla.o