Commit 500e69a1 authored by Lee Jones's avatar Lee Jones

mfd: ab8500-core: Fix many warnings reported by Checkpatch

WARNING: Block comments use a trailing */ on a separate line
+        * */

WARNING: Block comments use a trailing */ on a separate line
+        * bank on higher 8 bits and reg in lower */

WARNING: Block comments use a trailing */ on a separate line
+        * bank on higher 8 bits and reg in lower */

WARNING: suspect code indent for conditional statements (8, 24)
+       if (unlikely(*offset == 17))
+                       *offset = 24;

WARNING: suspect code indent for conditional statements (8, 24)
+       if (unlikely(*offset == 16))
+                       *offset = 25;

WARNING: suspect code indent for conditional statements (8, 24)
+       if ((i == 3) && (*offset >= 24))
+                       *offset += 2;

WARNING: ENOSYS means 'invalid syscall nr' and nothing else
+               return -ENOSYS;

WARNING: static const char * array should probably be static const char * const
+       static const char *switch_off_status[] = {

WARNING: static const char * array should probably be static const char * const
+       static const char *turn_on_status[] = {

total: 0 errors, 9 warnings, 1867 lines checked

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
parent 845b76f8
......@@ -211,7 +211,7 @@ static int set_register_interruptible(struct ab8500 *ab8500, u8 bank,
/*
* Put the u8 bank and u8 register together into a an u16.
* The bank on higher 8 bits and register in lower 8 bits.
* */
*/
u16 addr = ((u16)bank) << 8 | reg;
dev_vdbg(ab8500->dev, "wr: addr %#x <= %#x\n", addr, data);
......@@ -243,8 +243,6 @@ static int get_register_interruptible(struct ab8500 *ab8500, u8 bank,
u8 reg, u8 *value)
{
int ret;
/* put the u8 bank and u8 reg together into a an u16.
* bank on higher 8 bits and reg in lower */
u16 addr = ((u16)bank) << 8 | reg;
mutex_lock(&ab8500->lock);
......@@ -278,8 +276,6 @@ static int mask_and_set_register_interruptible(struct ab8500 *ab8500, u8 bank,
u8 reg, u8 bitmask, u8 bitvalues)
{
int ret;
/* put the u8 bank and u8 reg together into a an u16.
* bank on higher 8 bits and reg in lower */
u16 addr = ((u16)bank) << 8 | reg;
mutex_lock(&ab8500->lock);
......@@ -595,7 +591,7 @@ static int ab8500_irq_init(struct ab8500 *ab8500, struct device_node *np)
if (!ab8500->domain) {
dev_err(ab8500->dev, "Failed to create irqdomain\n");
return -ENOSYS;
return -ENODEV;
}
return 0;
......@@ -1073,7 +1069,7 @@ static struct attribute_group ab9540_attr_group = {
static int ab8500_probe(struct platform_device *pdev)
{
static const char *switch_off_status[] = {
static const char * const switch_off_status[] = {
"Swoff bit programming",
"Thermal protection activation",
"Vbat lower then BattOk falling threshold",
......@@ -1082,7 +1078,7 @@ static int ab8500_probe(struct platform_device *pdev)
"Battery level lower than power on reset threshold",
"Power on key 1 pressed longer than 10 seconds",
"DB8500 thermal shutdown"};
static const char *turn_on_status[] = {
static const char * const turn_on_status[] = {
"Battery rising (Vbat)",
"Power On Key 1 dbF",
"Power On Key 2 dbF",
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment