ath9k_hw: Configure new switch table for AR9565 BTCOEX

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/ath/ath9k/ar9003_eeprom.c

@@ -3601,7 +3601,7 @@ static void ar9003_hw_ant_ctrl_apply(struct ath_hw *ah, bool is2ghz)
 	 *   7:4 R/W  SWITCH_TABLE_COM_SPDT_WLAN_IDLE
 	 * SWITCH_TABLE_COM_SPDT_WLAN_IDLE
 	 */
-	if (AR_SREV_9462_20_OR_LATER(ah)) {
+	if (AR_SREV_9462_20(ah) || AR_SREV_9565(ah)) {
 		value = ar9003_switch_com_spdt_get(ah, is2ghz);
 		REG_RMW_FIELD(ah, AR_PHY_GLB_CONTROL,
 				AR_SWITCH_TABLE_COM_SPDT_ALL, value);

drivers/net/wireless/ath/ath9k/reg.h

@@ -907,10 +907,6 @@
 	(((_ah)->hw_version.macVersion == AR_SREV_VERSION_9462) && \
 	((_ah)->hw_version.macRev == AR_SREV_REVISION_9462_20))
 
-#define AR_SREV_9462_20_OR_LATER(_ah) \
-	(((_ah)->hw_version.macVersion == AR_SREV_VERSION_9462) && \
-	((_ah)->hw_version.macRev >= AR_SREV_REVISION_9462_20))
-
 #define AR_SREV_9565(_ah) \
 	(((_ah)->hw_version.macVersion == AR_SREV_VERSION_9565))
 

drivers/net/wireless/ath/ath9k/wow.c

@@ -118,7 +118,7 @@ static void ath9k_wow_create_keep_alive_pattern(struct ath_hw *ah)
 		       (ap_mac_addr[1] << 8) | (ap_mac_addr[0]);
 	data_word[5] = (ap_mac_addr[5] << 8) | (ap_mac_addr[4]);
 
-	if (AR_SREV_9462_20_OR_LATER(ah)) {
+	if (AR_SREV_9462_20(ah)) {
 		/* AR9462 2.0 has an extra descriptor word (time based
 		 * discard) compared to other chips */
 		REG_WRITE(ah, (AR_WOW_KA_DESC_WORD2 + (12 * 4)), 0);