Commit 5080c7e9 authored by Yotam Gigi's avatar Yotam Gigi Committed by David S. Miller

mlxsw: reg: Add the Router Interface Group Version 2 register

The RIGR-V2 register is used to add, remove and query egress interface list
of a multicast forwarding entry and it will be used by the multicast
router offloading logic.
Signed-off-by: default avatarYotam Gigi <yotamg@mellanox.com>
Reviewed-by: default avatarIdo Schimmel <idosch@mellanox.com>
Signed-off-by: default avatarJiri Pirko <jiri@mellanox.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 46a7054e
...@@ -5646,6 +5646,88 @@ mlxsw_reg_rtdp_ipip4_pack(char *payload, u16 irif, ...@@ -5646,6 +5646,88 @@ mlxsw_reg_rtdp_ipip4_pack(char *payload, u16 irif,
mlxsw_reg_rtdp_ipip_expected_gre_key_set(payload, expected_gre_key); mlxsw_reg_rtdp_ipip_expected_gre_key_set(payload, expected_gre_key);
} }
/* RIGR-V2 - Router Interface Group Register Version 2
* ---------------------------------------------------
* The RIGR_V2 register is used to add, remove and query egress interface list
* of a multicast forwarding entry.
*/
#define MLXSW_REG_RIGR2_ID 0x8023
#define MLXSW_REG_RIGR2_LEN 0xB0
#define MLXSW_REG_RIGR2_MAX_ERIFS 32
MLXSW_REG_DEFINE(rigr2, MLXSW_REG_RIGR2_ID, MLXSW_REG_RIGR2_LEN);
/* reg_rigr2_rigr_index
* KVD Linear index.
* Access: Index
*/
MLXSW_ITEM32(reg, rigr2, rigr_index, 0x04, 0, 24);
/* reg_rigr2_vnext
* Next RIGR Index is valid.
* Access: RW
*/
MLXSW_ITEM32(reg, rigr2, vnext, 0x08, 31, 1);
/* reg_rigr2_next_rigr_index
* Next RIGR Index. The index is to the KVD linear.
* Reserved when vnxet = '0'.
* Access: RW
*/
MLXSW_ITEM32(reg, rigr2, next_rigr_index, 0x08, 0, 24);
/* reg_rigr2_vrmid
* RMID Index is valid.
* Access: RW
*/
MLXSW_ITEM32(reg, rigr2, vrmid, 0x20, 31, 1);
/* reg_rigr2_rmid_index
* RMID Index.
* Range 0 .. max_mid - 1
* Reserved when vrmid = '0'.
* The index is to the Port Group Table (PGT)
* Access: RW
*/
MLXSW_ITEM32(reg, rigr2, rmid_index, 0x20, 0, 16);
/* reg_rigr2_erif_entry_v
* Egress Router Interface is valid.
* Note that low-entries must be set if high-entries are set. For
* example: if erif_entry[2].v is set then erif_entry[1].v and
* erif_entry[0].v must be set.
* Index can be from 0 to cap_mc_erif_list_entries-1
* Access: RW
*/
MLXSW_ITEM32_INDEXED(reg, rigr2, erif_entry_v, 0x24, 31, 1, 4, 0, false);
/* reg_rigr2_erif_entry_erif
* Egress Router Interface.
* Valid range is from 0 to cap_max_router_interfaces - 1
* Index can be from 0 to MLXSW_REG_RIGR2_MAX_ERIFS - 1
* Access: RW
*/
MLXSW_ITEM32_INDEXED(reg, rigr2, erif_entry_erif, 0x24, 0, 16, 4, 0, false);
static inline void mlxsw_reg_rigr2_pack(char *payload, u32 rigr_index,
bool vnext, u32 next_rigr_index)
{
MLXSW_REG_ZERO(rigr2, payload);
mlxsw_reg_rigr2_rigr_index_set(payload, rigr_index);
mlxsw_reg_rigr2_vnext_set(payload, vnext);
mlxsw_reg_rigr2_next_rigr_index_set(payload, next_rigr_index);
mlxsw_reg_rigr2_vrmid_set(payload, 0);
mlxsw_reg_rigr2_rmid_index_set(payload, 0);
}
static inline void mlxsw_reg_rigr2_erif_entry_pack(char *payload, int index,
bool v, u16 erif)
{
mlxsw_reg_rigr2_erif_entry_v_set(payload, index, v);
mlxsw_reg_rigr2_erif_entry_erif_set(payload, index, erif);
}
/* MFCR - Management Fan Control Register /* MFCR - Management Fan Control Register
* -------------------------------------- * --------------------------------------
* This register controls the settings of the Fan Speed PWM mechanism. * This register controls the settings of the Fan Speed PWM mechanism.
...@@ -6917,6 +6999,7 @@ static const struct mlxsw_reg_info *mlxsw_reg_infos[] = { ...@@ -6917,6 +6999,7 @@ static const struct mlxsw_reg_info *mlxsw_reg_infos[] = {
MLXSW_REG(rauht), MLXSW_REG(rauht),
MLXSW_REG(raleu), MLXSW_REG(raleu),
MLXSW_REG(rauhtd), MLXSW_REG(rauhtd),
MLXSW_REG(rigr2),
MLXSW_REG(mfcr), MLXSW_REG(mfcr),
MLXSW_REG(mfsc), MLXSW_REG(mfsc),
MLXSW_REG(mfsm), MLXSW_REG(mfsm),
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment