[SCSI] lpfc 8.3.25: Fabric and Target Discovery Fixes

Fabric and Target Discovery Fixes

- Clear FC_VPORT_NEEDS_INIT_VPI flag during completion of REG_VFI mailbox
  command.
- Prevent SLI3 Code from unregistering the physical VPI.
- Add an else clause to the code that checks and sets
  sp->cmn.request_multiple_Nport to clear the bit.
- Remove a redundant mbox free.
- Modified lpfc_sli4_async_fip_evt to pass in physical VPI toi
  lpfc_find_vport_by_vpid function.
- Modified lpfc_find_vport_by_vpid to translate physical VPI to logical VPI
  before comparing with vport VPI.
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

drivers/scsi/lpfc/lpfc_els.c

@@ -647,21 +647,15 @@ lpfc_cmpl_els_flogi_fabric(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 		}
 		lpfc_cleanup_pending_mbox(vport);
 
-		if (phba->sli_rev == LPFC_SLI_REV4)
+		if (phba->sli_rev == LPFC_SLI_REV4) {
 			lpfc_sli4_unreg_all_rpis(vport);
-
-		if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) {
 			lpfc_mbx_unreg_vpi(vport);
 			spin_lock_irq(shost->host_lock);
 			vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
-			spin_unlock_irq(shost->host_lock);
-		}
 			/*
 			* If VPI is unreged, driver need to do INIT_VPI
 			* before re-registering
 			*/
-		if (phba->sli_rev == LPFC_SLI_REV4) {
-			spin_lock_irq(shost->host_lock);
 			vport->fc_flag |= FC_VPORT_NEEDS_INIT_VPI;
 			spin_unlock_irq(shost->host_lock);
 		}
@@ -1096,11 +1090,14 @@ lpfc_issue_els_flogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 			/* Set the fcfi to the fcfi we registered with */
 			elsiocb->iocb.ulpContext = phba->fcf.fcfi;
 		}
-	} else if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) {
+	} else {
+		if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) {
 			sp->cmn.request_multiple_Nport = 1;
 			/* For FLOGI, Let FLOGI rsp set the NPortID for VPI 0 */
 			icmd->ulpCt_h = 1;
 			icmd->ulpCt_l = 0;
+		} else
+			sp->cmn.request_multiple_Nport = 0;
 	}
 
 	if (phba->fc_topology != LPFC_TOPOLOGY_LOOP) {
@@ -6608,7 +6605,7 @@ lpfc_find_vport_by_vpid(struct lpfc_hba *phba, uint16_t vpi)
 {
 	struct lpfc_vport *vport;
 	unsigned long flags;
-	int i;
+	int i = 0;
 
 	/* The physical ports are always vpi 0 - translate is unnecessary. */
 	if (vpi > 0) {
@@ -6631,7 +6628,7 @@ lpfc_find_vport_by_vpid(struct lpfc_hba *phba, uint16_t vpi)
 
 	spin_lock_irqsave(&phba->hbalock, flags);
 	list_for_each_entry(vport, &phba->port_list, listentry) {
-		if (vport->vpi == vpi) {
+		if (vport->vpi == i) {
 			spin_unlock_irqrestore(&phba->hbalock, flags);
 			return vport;
 		}

drivers/scsi/lpfc/lpfc_hbadisc.c

@@ -2247,7 +2247,6 @@ lpfc_mbx_cmpl_fcf_scan_read_fcf_rec(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
 				spin_lock_irq(&phba->hbalock);
 				phba->fcf.fcf_flag |= FCF_REDISC_FOV;
 				spin_unlock_irq(&phba->hbalock);
-				lpfc_sli4_mbox_cmd_free(phba, mboxq);
 				lpfc_sli4_fcf_scan_read_fcf_rec(phba,
 						LPFC_FCOE_FCF_GET_FIRST);
 				return;
@@ -2645,6 +2644,7 @@ lpfc_mbx_cmpl_reg_vfi(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
 	vport->vpi_state |= LPFC_VPI_REGISTERED;
 	vport->fc_flag |= FC_VFI_REGISTERED;
 	vport->fc_flag &= ~FC_VPORT_NEEDS_REG_VPI;
+	vport->fc_flag &= ~FC_VPORT_NEEDS_INIT_VPI;
 	spin_unlock_irq(shost->host_lock);
 
 	if (vport->port_state == LPFC_FABRIC_CFG_LINK) {

drivers/scsi/lpfc/lpfc_init.c

@@ -3649,7 +3649,7 @@ lpfc_sli4_async_fip_evt(struct lpfc_hba *phba,
 			" tag 0x%x\n", acqe_fip->index, acqe_fip->event_tag);
 
 		vport = lpfc_find_vport_by_vpid(phba,
-				acqe_fip->index - phba->vpi_base);
+						acqe_fip->index);
 		ndlp = lpfc_sli4_perform_vport_cvl(vport);
 		if (!ndlp)
 			break;
@@ -4518,7 +4518,7 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
 		}
 	}
 
-	return rc;
+	return 0;
 
 out_free_fcp_eq_hdl:
 	kfree(phba->sli4_hba.fcp_eq_hdl);