Skip to content

L
linux
Commit 53291959 authored by Kumar Gala's avatar Kumar Gala
Browse files
Options

powerpc/85xx: Rework MPC8572DS device tree 

Utilize new split between board & SoC, and new SoC device trees split
into pre & post utilizing 'template' includes for SoC IP blocks.

Other changes include:

* Moved to specifying interrupt-parent for mpic at root
* Moved to 4-cell mpic interrupt cells to support MPIC timers
* Removed CPU properties setup by u-boot to match other .dts
* Reworked PCIe nodes to allow supportin IRQs for controller (errors) and
  moved PCI device IRQs down to virtual bridge level
* Moved mdio nodes up one level instead of under tsec nodes
* Added GPIO controller node to MPC8572 SoC template
* Dropping "fsl,mpc8572-IP..." from compatibles for standard blocks
Signed-off-by: default avatarKumar Gala <galak@kernel.crashing.org>
parent e7a7b329
Hide whitespace changes
Inline Side-by-side
Showing with 788 additions and 2110 deletions
arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi 0 → 100644
View file @ 53291959
/*
* MPC8572 Silicon/SoC Device Tree Source (post include)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
&lbc {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus";
interrupts = <19 2 0 0>;
};
/* controller at 0x8000 */
&pci0 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0 255>;
clock-frequency = <33333333>;
interrupts = <24 2 0 0>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <24 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
>;
};
};
/* controller at 0x9000 */
&pci1 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0 255>;
clock-frequency = <33333333>;
interrupts = <25 2 0 0>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <25 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
>;
};
};
/* controller at 0xa000 */
&pci2 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0 255>;
clock-frequency = <33333333>;
interrupts = <26 2 0 0>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <26 2 0 0>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
>;
};
};
&soc {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "fsl,mpc8572-immr", "simple-bus";
bus-frequency = <0>; // Filled out by uboot.
ecm-law@0 {
compatible = "fsl,ecm-law";
reg = <0x0 0x1000>;
fsl,num-laws = <12>;
};
ecm@1000 {
compatible = "fsl,mpc8572-ecm", "fsl,ecm";
reg = <0x1000 0x1000>;
interrupts = <17 2 0 0>;
};
memory-controller@2000 {
compatible = "fsl,mpc8572-memory-controller";
reg = <0x2000 0x1000>;
interrupts = <18 2 0 0>;
};
memory-controller@6000 {
compatible = "fsl,mpc8572-memory-controller";
reg = <0x6000 0x1000>;
interrupts = <18 2 0 0>;
};
/include/ "pq3-i2c-0.dtsi"
/include/ "pq3-i2c-1.dtsi"
/include/ "pq3-duart-0.dtsi"
/include/ "pq3-dma-1.dtsi"
/include/ "pq3-gpio-0.dtsi"
gpio-controller@f000 {
compatible = "fsl,mpc8572-gpio", "fsl,pq3-gpio";
};
L2: l2-cache-controller@20000 {
compatible = "fsl,mpc8572-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes
cache-size = <0x100000>; // L2,1M
interrupts = <16 2 0 0>;
};
/include/ "pq3-dma-0.dtsi"
/include/ "pq3-etsec1-0.dtsi"
/include/ "pq3-etsec1-timer-0.dtsi"
ptp_clock@24e00 {
interrupts = <68 2 0 0 69 2 0 0 70 2 0 0 71 2 0 0>;
};
/include/ "pq3-etsec1-1.dtsi"
/include/ "pq3-etsec1-2.dtsi"
/include/ "pq3-etsec1-3.dtsi"
/include/ "pq3-sec3.0-0.dtsi"
/include/ "pq3-mpic.dtsi"
/include/ "pq3-mpic-timer-B.dtsi"
global-utilities@e0000 {
compatible = "fsl,mpc8572-guts";
reg = <0xe0000 0x1000>;
fsl,has-rstcr;
};
};
arch/powerpc/boot/dts/fsl/mpc8572si-pre.dtsi 0 → 100644
View file @ 53291959
/*
* MPC8572 Silicon/SoC Device Tree Source (pre include)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/dts-v1/;
/ {
compatible = "fsl,MPC8572";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&mpic>;
aliases {
serial0 = &serial0;
serial1 = &serial1;
ethernet0 = &enet0;
ethernet1 = &enet1;
ethernet2 = &enet2;
ethernet3 = &enet3;
pci0 = &pci0;
pci1 = &pci1;
pci2 = &pci2;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8572@0 {
device_type = "cpu";
reg = <0x0>;
next-level-cache = <&L2>;
};
PowerPC,8572@1 {
device_type = "cpu";
reg = <0x1>;
next-level-cache = <&L2>;
};
};
};
arch/powerpc/boot/dts/mpc8572ds.dts
View file @ 53291959
......@@ -9,67 +9,18 @@
* option) any later version.
*/
/dts-v1/;
/include/ "fsl/mpc8572si-pre.dtsi"
/ {
model = "fsl,MPC8572DS";
compatible = "fsl,MPC8572DS";
#address-cells = <2>;
#size-cells = <2>;
aliases {
ethernet0 = &enet0;
ethernet1 = &enet1;
ethernet2 = &enet2;
ethernet3 = &enet3;
serial0 = &serial0;
serial1 = &serial1;
pci0 = &pci0;
pci1 = &pci1;
pci2 = &pci2;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8572@0 {
device_type = "cpu";
reg = <0x0>;
d-cache-line-size = <32>; // 32 bytes
i-cache-line-size = <32>; // 32 bytes
d-cache-size = <0x8000>; // L1, 32K
i-cache-size = <0x8000>; // L1, 32K
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
next-level-cache = <&L2>;
};
PowerPC,8572@1 {
device_type = "cpu";
reg = <0x1>;
d-cache-line-size = <32>; // 32 bytes
i-cache-line-size = <32>; // 32 bytes
d-cache-size = <0x8000>; // L1, 32K
i-cache-size = <0x8000>; // L1, 32K
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
next-level-cache = <&L2>;
};
};
memory {
device_type = "memory";
};
localbus@ffe05000 {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus";
board_lbc: lbc: localbus@ffe05000 {
reg = <0 0xffe05000 0 0x1000>;
interrupts = <19 2>;
interrupt-parent = <&mpic>;
ranges = <0x0 0x0 0x0 0xe8000000 0x08000000
0x1 0x0 0x0 0xe0000000 0x08000000
......@@ -78,601 +29,17 @@ localbus@ffe05000 {
0x4 0x0 0x0 0xffa40000 0x00040000
0x5 0x0 0x0 0xffa80000 0x00040000
0x6 0x0 0x0 0xffac0000 0x00040000>;
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
bank-width = <2>;
device-width = <1>;
ramdisk@0 {
reg = <0x0 0x03000000>;
read-only;
};
diagnostic@3000000 {
reg = <0x03000000 0x00e00000>;
read-only;
};
dink@3e00000 {
reg = <0x03e00000 0x00200000>;
read-only;
};
kernel@4000000 {
reg = <0x04000000 0x00400000>;
read-only;
};
jffs2@4400000 {
reg = <0x04400000 0x03b00000>;
};
dtb@7f00000 {
reg = <0x07f00000 0x00080000>;
read-only;
};
u-boot@7f80000 {
reg = <0x07f80000 0x00080000>;
read-only;
};
};
nand@2,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8572-fcm-nand",
"fsl,elbc-fcm-nand";
reg = <0x2 0x0 0x40000>;
u-boot@0 {
reg = <0x0 0x02000000>;
read-only;
};
jffs2@2000000 {
reg = <0x02000000 0x10000000>;
};
ramdisk@12000000 {
reg = <0x12000000 0x08000000>;
read-only;
};
kernel@1a000000 {
reg = <0x1a000000 0x04000000>;
};
dtb@1e000000 {
reg = <0x1e000000 0x01000000>;
read-only;
};
empty@1f000000 {
reg = <0x1f000000 0x21000000>;
};
};
nand@4,0 {
compatible = "fsl,mpc8572-fcm-nand",
"fsl,elbc-fcm-nand";
reg = <0x4 0x0 0x40000>;
};
nand@5,0 {
compatible = "fsl,mpc8572-fcm-nand",
"fsl,elbc-fcm-nand";
reg = <0x5 0x0 0x40000>;
};
nand@6,0 {
compatible = "fsl,mpc8572-fcm-nand",
"fsl,elbc-fcm-nand";
reg = <0x6 0x0 0x40000>;
};
};
soc8572@ffe00000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "simple-bus";
board_soc: soc: soc8572@ffe00000 {
ranges = <0x0 0 0xffe00000 0x100000>;
bus-frequency = <0>; // Filled out by uboot.
ecm-law@0 {
compatible = "fsl,ecm-law";
reg = <0x0 0x1000>;
fsl,num-laws = <12>;
};
ecm@1000 {
compatible = "fsl,mpc8572-ecm", "fsl,ecm";
reg = <0x1000 0x1000>;
interrupts = <17 2>;
interrupt-parent = <&mpic>;
};
memory-controller@2000 {
compatible = "fsl,mpc8572-memory-controller";
reg = <0x2000 0x1000>;
interrupt-parent = <&mpic>;
interrupts = <18 2>;
};
memory-controller@6000 {
compatible = "fsl,mpc8572-memory-controller";
reg = <0x6000 0x1000>;
interrupt-parent = <&mpic>;
interrupts = <18 2>;
};
L2: l2-cache-controller@20000 {
compatible = "fsl,mpc8572-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes
cache-size = <0x100000>; // L2, 1M
interrupt-parent = <&mpic>;
interrupts = <16 2>;
};
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
};
i2c@3100 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <1>;
compatible = "fsl-i2c";
reg = <0x3100 0x100>;
interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
};
dma@c300 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
reg = <0xc300 0x4>;
ranges = <0x0 0xc100 0x200>;
cell-index = <1>;
dma-channel@0 {
compatible = "fsl,mpc8572-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x0 0x80>;
cell-index = <0>;
interrupt-parent = <&mpic>;
interrupts = <76 2>;
};
dma-channel@80 {
compatible = "fsl,mpc8572-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x80 0x80>;
cell-index = <1>;
interrupt-parent = <&mpic>;
interrupts = <77 2>;
};
dma-channel@100 {
compatible = "fsl,mpc8572-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x100 0x80>;
cell-index = <2>;
interrupt-parent = <&mpic>;
interrupts = <78 2>;
};
dma-channel@180 {
compatible = "fsl,mpc8572-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x180 0x80>;
cell-index = <3>;
interrupt-parent = <&mpic>;
interrupts = <79 2>;
};
};
dma@21300 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
reg = <0x21300 0x4>;
ranges = <0x0 0x21100 0x200>;
cell-index = <0>;
dma-channel@0 {
compatible = "fsl,mpc8572-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x0 0x80>;
cell-index = <0>;
interrupt-parent = <&mpic>;
interrupts = <20 2>;
};
dma-channel@80 {
compatible = "fsl,mpc8572-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x80 0x80>;
cell-index = <1>;
interrupt-parent = <&mpic>;
interrupts = <21 2>;
};
dma-channel@100 {
compatible = "fsl,mpc8572-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x100 0x80>;
cell-index = <2>;
interrupt-parent = <&mpic>;
interrupts = <22 2>;
};
dma-channel@180 {
compatible = "fsl,mpc8572-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x180 0x80>;
cell-index = <3>;
interrupt-parent = <&mpic>;
interrupts = <23 2>;
};
};
ptp_clock@24E00 {
compatible = "fsl,etsec-ptp";
reg = <0x24E00 0xB0>;
interrupts = <68 2 69 2 70 2 71 2>;
interrupt-parent = < &mpic >;
fsl,tclk-period = <5>;
fsl,tmr-prsc = <200>;
fsl,tmr-add = <0xAAAAAAAB>;
fsl,tmr-fiper1 = <0x3B9AC9FB>;
fsl,tmr-fiper2 = <0x3B9AC9FB>;
fsl,max-adj = <499999999>;
};
enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <0x0>;
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <0x1>;
};
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <0x2>;
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <0x3>;
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
};
enet1: ethernet@25000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
};
enet2: ethernet@26000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <2>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x26000 0x1000>;
ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
phy-connection-type = "rgmii-id";
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi2: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
};
enet3: ethernet@27000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <3>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x27000 0x1000>;
ranges = <0x0 0x27000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <37 2 38 2 39 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi3>;
phy-handle = <&phy3>;
phy-connection-type = "rgmii-id";
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi3: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
};
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
compatible = "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
global-utilities@e0000 { //global utilities block
compatible = "fsl,mpc8572-guts";
reg = <0xe0000 0x1000>;
fsl,has-rstcr;
};
msi@41600 {
compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
reg = <0x41600 0x80>;
msi-available-ranges = <0 0x100>;
interrupts = <
0xe0 0
0xe1 0
0xe2 0
0xe3 0
0xe4 0
0xe5 0
0xe6 0
0xe7 0>;
interrupt-parent = <&mpic>;
};
crypto@30000 {
compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
"fsl,sec2.1", "fsl,sec2.0";
reg = <0x30000 0x10000>;
interrupts = <45 2 58 2>;
interrupt-parent = <&mpic>;
fsl,num-channels = <4>;
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0x9fe>;
fsl,descriptor-types-mask = <0x3ab0ebf>;
};
mpic: pic@40000 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
};
};
pci0: pcie@ffe08000 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
board_pci0: pci0: pcie@ffe08000 {
reg = <0 0xffe08000 0 0x1000>;
bus-range = <0 255>;
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x00010000>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
interrupts = <24 2>;
interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x11 func 0 - PCI slot 1 */
0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
0x8800 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x11 func 1 - PCI slot 1 */
0x8900 0x0 0x0 0x1 &mpic 0x2 0x1
0x8900 0x0 0x0 0x2 &mpic 0x3 0x1
0x8900 0x0 0x0 0x3 &mpic 0x4 0x1
0x8900 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x11 func 2 - PCI slot 1 */
0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1
0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1
0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1
0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x11 func 3 - PCI slot 1 */
0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1
0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1
0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1
0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x11 func 4 - PCI slot 1 */
0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1
0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1
0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1
0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x11 func 5 - PCI slot 1 */
0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1
0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1
0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1
0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x11 func 6 - PCI slot 1 */
0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1
0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1
0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1
0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x11 func 7 - PCI slot 1 */
0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1
0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1
0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1
0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x12 func 0 - PCI slot 2 */
0x9000 0x0 0x0 0x1 &mpic 0x3 0x1
0x9000 0x0 0x0 0x2 &mpic 0x4 0x1
0x9000 0x0 0x0 0x3 &mpic 0x1 0x1
0x9000 0x0 0x0 0x4 &mpic 0x2 0x1
/* IDSEL 0x12 func 1 - PCI slot 2 */
0x9100 0x0 0x0 0x1 &mpic 0x3 0x1
0x9100 0x0 0x0 0x2 &mpic 0x4 0x1
0x9100 0x0 0x0 0x3 &mpic 0x1 0x1
0x9100 0x0 0x0 0x4 &mpic 0x2 0x1
/* IDSEL 0x12 func 2 - PCI slot 2 */
0x9200 0x0 0x0 0x1 &mpic 0x3 0x1
0x9200 0x0 0x0 0x2 &mpic 0x4 0x1
0x9200 0x0 0x0 0x3 &mpic 0x1 0x1
0x9200 0x0 0x0 0x4 &mpic 0x2 0x1
/* IDSEL 0x12 func 3 - PCI slot 2 */
0x9300 0x0 0x0 0x1 &mpic 0x3 0x1
0x9300 0x0 0x0 0x2 &mpic 0x4 0x1
0x9300 0x0 0x0 0x3 &mpic 0x1 0x1
0x9300 0x0 0x0 0x4 &mpic 0x2 0x1
/* IDSEL 0x12 func 4 - PCI slot 2 */
0x9400 0x0 0x0 0x1 &mpic 0x3 0x1
0x9400 0x0 0x0 0x2 &mpic 0x4 0x1
0x9400 0x0 0x0 0x3 &mpic 0x1 0x1
0x9400 0x0 0x0 0x4 &mpic 0x2 0x1
/* IDSEL 0x12 func 5 - PCI slot 2 */
0x9500 0x0 0x0 0x1 &mpic 0x3 0x1
0x9500 0x0 0x0 0x2 &mpic 0x4 0x1
0x9500 0x0 0x0 0x3 &mpic 0x1 0x1
0x9500 0x0 0x0 0x4 &mpic 0x2 0x1
/* IDSEL 0x12 func 6 - PCI slot 2 */
0x9600 0x0 0x0 0x1 &mpic 0x3 0x1
0x9600 0x0 0x0 0x2 &mpic 0x4 0x1
0x9600 0x0 0x0 0x3 &mpic 0x1 0x1
0x9600 0x0 0x0 0x4 &mpic 0x2 0x1
/* IDSEL 0x12 func 7 - PCI slot 2 */
0x9700 0x0 0x0 0x1 &mpic 0x3 0x1
0x9700 0x0 0x0 0x2 &mpic 0x4 0x1
0x9700 0x0 0x0 0x3 &mpic 0x1 0x1
0x9700 0x0 0x0 0x4 &mpic 0x2 0x1
// IDSEL 0x1c USB
0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
// IDSEL 0x1d Audio
0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
// IDSEL 0x1e Legacy
0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
// IDSEL 0x1f IDE/SATA
0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
>;
pcie@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
......@@ -680,99 +47,14 @@ pcie@0 {
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x10000>;
uli1575@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x10000>;
isa@1e {
device_type = "isa";
#interrupt-cells = <2>;
#size-cells = <1>;
#address-cells = <2>;
reg = <0xf000 0x0 0x0 0x0 0x0>;
ranges = <0x1 0x0 0x1000000 0x0 0x0
0x1000>;
interrupt-parent = <&i8259>;
i8259: interrupt-controller@20 {
reg = <0x1 0x20 0x2
0x1 0xa0 0x2
0x1 0x4d0 0x2>;
interrupt-controller;
device_type = "interrupt-controller";
#address-cells = <0>;
#interrupt-cells = <2>;
compatible = "chrp,iic";
interrupts = <9 2>;
interrupt-parent = <&mpic>;
};
i8042@60 {
#size-cells = <0>;
#address-cells = <1>;
reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
interrupts = <1 3 12 3>;
interrupt-parent =
<&i8259>;
keyboard@0 {
reg = <0x0>;
compatible = "pnpPNP,303";
};
mouse@1 {
reg = <0x1>;
compatible = "pnpPNP,f03";
};
};
rtc@70 {
compatible = "pnpPNP,b00";
reg = <0x1 0x70 0x2>;
};
gpio@400 {
reg = <0x1 0x400 0x80>;
};
};
};
};
};
pci1: pcie@ffe09000 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0 0xffe09000 0 0x1000>;
bus-range = <0 255>;
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x00010000>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
interrupts = <25 2>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0x0 0x0 0x1 &mpic 0x4 0x1
0000 0x0 0x0 0x2 &mpic 0x5 0x1
0000 0x0 0x0 0x3 &mpic 0x6 0x1
0000 0x0 0x0 0x4 &mpic 0x7 0x1
>;
pcie@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
......@@ -784,31 +66,10 @@ pcie@0 {
};
pci2: pcie@ffe0a000 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0 0xffe0a000 0 0x1000>;
bus-range = <0 255>;
ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x00010000>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
interrupts = <26 2>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0x0 0x0 0x1 &mpic 0x0 0x1
0000 0x0 0x0 0x2 &mpic 0x1 0x1
0000 0x0 0x0 0x3 &mpic 0x2 0x1
0000 0x0 0x0 0x4 &mpic 0x3 0x1
>;
pcie@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
ranges = <0x2000000 0x0 0xc0000000
0x2000000 0x0 0xc0000000
0x0 0x20000000
......@@ -819,3 +80,11 @@ pcie@0 {
};
};
};
/*
* mpc8572ds.dtsi must be last to ensure board_pci0 overrides pci0 settings
* for interrupt-map & interrupt-map-mask
*/
/include/ "fsl/mpc8572si-post.dtsi"
/include/ "mpc8572ds.dtsi"
arch/powerpc/boot/dts/mpc8572ds.dtsi 0 → 100644
View file @ 53291959
/*
* MPC8572DS Device Tree Source stub (no addresses or top-level ranges)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
&board_lbc {
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
bank-width = <2>;
device-width = <1>;
ramdisk@0 {
reg = <0x0 0x03000000>;
read-only;
};
diagnostic@3000000 {
reg = <0x03000000 0x00e00000>;
read-only;
};
dink@3e00000 {
reg = <0x03e00000 0x00200000>;
read-only;
};
kernel@4000000 {
reg = <0x04000000 0x00400000>;
read-only;
};
jffs2@4400000 {
reg = <0x04400000 0x03b00000>;
};
dtb@7f00000 {
reg = <0x07f00000 0x00080000>;
read-only;
};
u-boot@7f80000 {
reg = <0x07f80000 0x00080000>;
read-only;
};
};
nand@2,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8572-fcm-nand",
"fsl,elbc-fcm-nand";
reg = <0x2 0x0 0x40000>;
u-boot@0 {
reg = <0x0 0x02000000>;
read-only;
};
jffs2@2000000 {
reg = <0x02000000 0x10000000>;
};
ramdisk@12000000 {
reg = <0x12000000 0x08000000>;
read-only;
};
kernel@1a000000 {
reg = <0x1a000000 0x04000000>;
};
dtb@1e000000 {
reg = <0x1e000000 0x01000000>;
read-only;
};
empty@1f000000 {
reg = <0x1f000000 0x21000000>;
};
};
nand@4,0 {
compatible = "fsl,mpc8572-fcm-nand",
"fsl,elbc-fcm-nand";
reg = <0x4 0x0 0x40000>;
};
nand@5,0 {
compatible = "fsl,mpc8572-fcm-nand",
"fsl,elbc-fcm-nand";
reg = <0x5 0x0 0x40000>;
};
nand@6,0 {
compatible = "fsl,mpc8572-fcm-nand",
"fsl,elbc-fcm-nand";
reg = <0x6 0x0 0x40000>;
};
};
&board_soc {
enet0: ethernet@24000 {
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
};
mdio@24520 {
phy0: ethernet-phy@0 {
interrupts = <10 1 0 0>;
reg = <0x0>;
};
phy1: ethernet-phy@1 {
interrupts = <10 1 0 0>;
reg = <0x1>;
};
phy2: ethernet-phy@2 {
interrupts = <10 1 0 0>;
reg = <0x2>;
};
phy3: ethernet-phy@3 {
interrupts = <10 1 0 0>;
reg = <0x3>;
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
ptp_clock@24e00 {
fsl,tclk-period = <5>;
fsl,tmr-prsc = <200>;
fsl,tmr-add = <0xAAAAAAAB>;
fsl,tmr-fiper1 = <0x3B9AC9FB>;
fsl,tmr-fiper2 = <0x3B9AC9FB>;
fsl,max-adj = <499999999>;
};
enet1: ethernet@25000 {
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
};
mdio@25520 {
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet2: ethernet@26000 {
tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
phy-connection-type = "rgmii-id";
};
mdio@26520 {
tbi2: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet3: ethernet@27000 {
tbi-handle = <&tbi3>;
phy-handle = <&phy3>;
phy-connection-type = "rgmii-id";
};
mdio@27520 {
tbi3: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
};
&board_pci0 {
pcie@0 {
interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x11 func 0 - PCI slot 1 */
0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
0x8800 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
/* IDSEL 0x11 func 1 - PCI slot 1 */
0x8900 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
0x8900 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
0x8900 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
0x8900 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
/* IDSEL 0x11 func 2 - PCI slot 1 */
0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
/* IDSEL 0x11 func 3 - PCI slot 1 */
0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
/* IDSEL 0x11 func 4 - PCI slot 1 */
0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
/* IDSEL 0x11 func 5 - PCI slot 1 */
0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
/* IDSEL 0x11 func 6 - PCI slot 1 */
0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
/* IDSEL 0x11 func 7 - PCI slot 1 */
0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
/* IDSEL 0x12 func 0 - PCI slot 2 */
0x9000 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
0x9000 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
0x9000 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
0x9000 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
/* IDSEL 0x12 func 1 - PCI slot 2 */
0x9100 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
0x9100 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
0x9100 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
0x9100 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
/* IDSEL 0x12 func 2 - PCI slot 2 */
0x9200 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
0x9200 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
0x9200 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
0x9200 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
/* IDSEL 0x12 func 3 - PCI slot 2 */
0x9300 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
0x9300 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
0x9300 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
0x9300 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
/* IDSEL 0x12 func 4 - PCI slot 2 */
0x9400 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
0x9400 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
0x9400 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
0x9400 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
/* IDSEL 0x12 func 5 - PCI slot 2 */
0x9500 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
0x9500 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
0x9500 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
0x9500 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
/* IDSEL 0x12 func 6 - PCI slot 2 */
0x9600 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
0x9600 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
0x9600 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
0x9600 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
/* IDSEL 0x12 func 7 - PCI slot 2 */
0x9700 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
0x9700 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
0x9700 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
0x9700 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
// IDSEL 0x1c USB
0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
// IDSEL 0x1d Audio
0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
// IDSEL 0x1e Legacy
0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
// IDSEL 0x1f IDE/SATA
0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
>;
uli1575@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x10000>;
isa@1e {
device_type = "isa";
#interrupt-cells = <2>;
#size-cells = <1>;
#address-cells = <2>;
reg = <0xf000 0x0 0x0 0x0 0x0>;
ranges = <0x1 0x0 0x1000000 0x0 0x0
0x1000>;
interrupt-parent = <&i8259>;
i8259: interrupt-controller@20 {
reg = <0x1 0x20 0x2
0x1 0xa0 0x2
0x1 0x4d0 0x2>;
interrupt-controller;
device_type = "interrupt-controller";
#address-cells = <0>;
#interrupt-cells = <2>;
compatible = "chrp,iic";
interrupts = <9 2 0 0>;
interrupt-parent = <&mpic>;
};
i8042@60 {
#size-cells = <0>;
#address-cells = <1>;
reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
interrupts = <1 3 12 3>;
interrupt-parent =
<&i8259>;
keyboard@0 {
reg = <0x0>;
compatible = "pnpPNP,303";
};
mouse@1 {
reg = <0x1>;
compatible = "pnpPNP,f03";
};
};
rtc@70 {
compatible = "pnpPNP,b00";
reg = <0x1 0x70 0x2>;
};
gpio@400 {
reg = <0x1 0x400 0x80>;
};
};
};
};
};
arch/powerpc/boot/dts/mpc8572ds_36b.dts
View file @ 53291959
/*
* MPC8572 DS Device Tree Source
* MPC8572DS Device Tree Source (36-bit address map)
*
* Copyright 2007-2009 Freescale Semiconductor Inc.
*
......@@ -9,67 +9,18 @@
* option) any later version.
*/
/dts-v1/;
/include/ "fsl/mpc8572si-pre.dtsi"
/ {
model = "fsl,MPC8572DS";
compatible = "fsl,MPC8572DS";
#address-cells = <2>;
#size-cells = <2>;
aliases {
ethernet0 = &enet0;
ethernet1 = &enet1;
ethernet2 = &enet2;
ethernet3 = &enet3;
serial0 = &serial0;
serial1 = &serial1;
pci0 = &pci0;
pci1 = &pci1;
pci2 = &pci2;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8572@0 {
device_type = "cpu";
reg = <0x0>;
d-cache-line-size = <32>; // 32 bytes
i-cache-line-size = <32>; // 32 bytes
d-cache-size = <0x8000>; // L1, 32K
i-cache-size = <0x8000>; // L1, 32K
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
next-level-cache = <&L2>;
};
PowerPC,8572@1 {
device_type = "cpu";
reg = <0x1>;
d-cache-line-size = <32>; // 32 bytes
i-cache-line-size = <32>; // 32 bytes
d-cache-size = <0x8000>; // L1, 32K
i-cache-size = <0x8000>; // L1, 32K
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
next-level-cache = <&L2>;
};
};
memory {
device_type = "memory";
};
localbus@fffe05000 {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus";
board_lbc: lbc: localbus@fffe05000 {
reg = <0xf 0xffe05000 0 0x1000>;
interrupts = <19 2>;
interrupt-parent = <&mpic>;
ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
0x1 0x0 0xf 0xe0000000 0x08000000
......@@ -78,588 +29,17 @@ localbus@fffe05000 {
0x4 0x0 0xf 0xffa40000 0x00040000
0x5 0x0 0xf 0xffa80000 0x00040000
0x6 0x0 0xf 0xffac0000 0x00040000>;
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
bank-width = <2>;
device-width = <1>;
ramdisk@0 {
reg = <0x0 0x03000000>;
read-only;
};
diagnostic@3000000 {
reg = <0x03000000 0x00e00000>;
read-only;
};
dink@3e00000 {
reg = <0x03e00000 0x00200000>;
read-only;
};
kernel@4000000 {
reg = <0x04000000 0x00400000>;
read-only;
};
jffs2@4400000 {
reg = <0x04400000 0x03b00000>;
};
dtb@7f00000 {
reg = <0x07f00000 0x00080000>;
read-only;
};
u-boot@7f80000 {
reg = <0x07f80000 0x00080000>;
read-only;
};
};
nand@2,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8572-fcm-nand",
"fsl,elbc-fcm-nand";
reg = <0x2 0x0 0x40000>;
u-boot@0 {
reg = <0x0 0x02000000>;
read-only;
};
jffs2@2000000 {
reg = <0x02000000 0x10000000>;
};
ramdisk@12000000 {
reg = <0x12000000 0x08000000>;
read-only;
};
kernel@1a000000 {
reg = <0x1a000000 0x04000000>;
};
dtb@1e000000 {
reg = <0x1e000000 0x01000000>;
read-only;
};
empty@1f000000 {
reg = <0x1f000000 0x21000000>;
};
};
nand@4,0 {
compatible = "fsl,mpc8572-fcm-nand",
"fsl,elbc-fcm-nand";
reg = <0x4 0x0 0x40000>;
};
nand@5,0 {
compatible = "fsl,mpc8572-fcm-nand",
"fsl,elbc-fcm-nand";
reg = <0x5 0x0 0x40000>;
};
nand@6,0 {
compatible = "fsl,mpc8572-fcm-nand",
"fsl,elbc-fcm-nand";
reg = <0x6 0x0 0x40000>;
};
};
soc8572@fffe00000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "simple-bus";
board_soc: soc: soc8572@fffe00000 {
ranges = <0x0 0xf 0xffe00000 0x100000>;
bus-frequency = <0>; // Filled out by uboot.
ecm-law@0 {
compatible = "fsl,ecm-law";
reg = <0x0 0x1000>;
fsl,num-laws = <12>;
};
ecm@1000 {
compatible = "fsl,mpc8572-ecm", "fsl,ecm";
reg = <0x1000 0x1000>;
interrupts = <17 2>;
interrupt-parent = <&mpic>;
};
memory-controller@2000 {
compatible = "fsl,mpc8572-memory-controller";
reg = <0x2000 0x1000>;
interrupt-parent = <&mpic>;
interrupts = <18 2>;
};
memory-controller@6000 {
compatible = "fsl,mpc8572-memory-controller";
reg = <0x6000 0x1000>;
interrupt-parent = <&mpic>;
interrupts = <18 2>;
};
L2: l2-cache-controller@20000 {
compatible = "fsl,mpc8572-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes
cache-size = <0x100000>; // L2, 1M
interrupt-parent = <&mpic>;
interrupts = <16 2>;
};
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
};
i2c@3100 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <1>;
compatible = "fsl-i2c";
reg = <0x3100 0x100>;
interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
};
dma@c300 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
reg = <0xc300 0x4>;
ranges = <0x0 0xc100 0x200>;
cell-index = <1>;
dma-channel@0 {
compatible = "fsl,mpc8572-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x0 0x80>;
cell-index = <0>;
interrupt-parent = <&mpic>;
interrupts = <76 2>;
};
dma-channel@80 {
compatible = "fsl,mpc8572-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x80 0x80>;
cell-index = <1>;
interrupt-parent = <&mpic>;
interrupts = <77 2>;
};
dma-channel@100 {
compatible = "fsl,mpc8572-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x100 0x80>;
cell-index = <2>;
interrupt-parent = <&mpic>;
interrupts = <78 2>;
};
dma-channel@180 {
compatible = "fsl,mpc8572-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x180 0x80>;
cell-index = <3>;
interrupt-parent = <&mpic>;
interrupts = <79 2>;
};
};
dma@21300 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
reg = <0x21300 0x4>;
ranges = <0x0 0x21100 0x200>;
cell-index = <0>;
dma-channel@0 {
compatible = "fsl,mpc8572-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x0 0x80>;
cell-index = <0>;
interrupt-parent = <&mpic>;
interrupts = <20 2>;
};
dma-channel@80 {
compatible = "fsl,mpc8572-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x80 0x80>;
cell-index = <1>;
interrupt-parent = <&mpic>;
interrupts = <21 2>;
};
dma-channel@100 {
compatible = "fsl,mpc8572-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x100 0x80>;
cell-index = <2>;
interrupt-parent = <&mpic>;
interrupts = <22 2>;
};
dma-channel@180 {
compatible = "fsl,mpc8572-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x180 0x80>;
cell-index = <3>;
interrupt-parent = <&mpic>;
interrupts = <23 2>;
};
};
enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <0x0>;
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <0x1>;
};
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <0x2>;
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <0x3>;
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
};
enet1: ethernet@25000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
};
enet2: ethernet@26000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <2>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x26000 0x1000>;
ranges = <0x0 0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
phy-connection-type = "rgmii-id";
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi2: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
};
enet3: ethernet@27000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <3>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x27000 0x1000>;
ranges = <0x0 0x27000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <37 2 38 2 39 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi3>;
phy-handle = <&phy3>;
phy-connection-type = "rgmii-id";
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi3: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
};
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
compatible = "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
global-utilities@e0000 { //global utilities block
compatible = "fsl,mpc8572-guts";
reg = <0xe0000 0x1000>;
fsl,has-rstcr;
};
msi@41600 {
compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
reg = <0x41600 0x80>;
msi-available-ranges = <0 0x100>;
interrupts = <
0xe0 0
0xe1 0
0xe2 0
0xe3 0
0xe4 0
0xe5 0
0xe6 0
0xe7 0>;
interrupt-parent = <&mpic>;
};
crypto@30000 {
compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
"fsl,sec2.1", "fsl,sec2.0";
reg = <0x30000 0x10000>;
interrupts = <45 2 58 2>;
interrupt-parent = <&mpic>;
fsl,num-channels = <4>;
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0x9fe>;
fsl,descriptor-types-mask = <0x3ab0ebf>;
};
mpic: pic@40000 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
};
};
pci0: pcie@fffe08000 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
board_pci0: pci0: pcie@fffe08000 {
reg = <0xf 0xffe08000 0 0x1000>;
bus-range = <0 255>;
ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x00010000>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
interrupts = <24 2>;
interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x11 func 0 - PCI slot 1 */
0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
0x8800 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x11 func 1 - PCI slot 1 */
0x8900 0x0 0x0 0x1 &mpic 0x2 0x1
0x8900 0x0 0x0 0x2 &mpic 0x3 0x1
0x8900 0x0 0x0 0x3 &mpic 0x4 0x1
0x8900 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x11 func 2 - PCI slot 1 */
0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1
0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1
0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1
0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x11 func 3 - PCI slot 1 */
0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1
0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1
0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1
0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x11 func 4 - PCI slot 1 */
0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1
0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1
0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1
0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x11 func 5 - PCI slot 1 */
0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1
0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1
0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1
0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x11 func 6 - PCI slot 1 */
0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1
0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1
0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1
0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x11 func 7 - PCI slot 1 */
0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1
0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1
0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1
0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x12 func 0 - PCI slot 2 */
0x9000 0x0 0x0 0x1 &mpic 0x3 0x1
0x9000 0x0 0x0 0x2 &mpic 0x4 0x1
0x9000 0x0 0x0 0x3 &mpic 0x1 0x1
0x9000 0x0 0x0 0x4 &mpic 0x2 0x1
/* IDSEL 0x12 func 1 - PCI slot 2 */
0x9100 0x0 0x0 0x1 &mpic 0x3 0x1
0x9100 0x0 0x0 0x2 &mpic 0x4 0x1
0x9100 0x0 0x0 0x3 &mpic 0x1 0x1
0x9100 0x0 0x0 0x4 &mpic 0x2 0x1
/* IDSEL 0x12 func 2 - PCI slot 2 */
0x9200 0x0 0x0 0x1 &mpic 0x3 0x1
0x9200 0x0 0x0 0x2 &mpic 0x4 0x1
0x9200 0x0 0x0 0x3 &mpic 0x1 0x1
0x9200 0x0 0x0 0x4 &mpic 0x2 0x1
/* IDSEL 0x12 func 3 - PCI slot 2 */
0x9300 0x0 0x0 0x1 &mpic 0x3 0x1
0x9300 0x0 0x0 0x2 &mpic 0x4 0x1
0x9300 0x0 0x0 0x3 &mpic 0x1 0x1
0x9300 0x0 0x0 0x4 &mpic 0x2 0x1
/* IDSEL 0x12 func 4 - PCI slot 2 */
0x9400 0x0 0x0 0x1 &mpic 0x3 0x1
0x9400 0x0 0x0 0x2 &mpic 0x4 0x1
0x9400 0x0 0x0 0x3 &mpic 0x1 0x1
0x9400 0x0 0x0 0x4 &mpic 0x2 0x1
/* IDSEL 0x12 func 5 - PCI slot 2 */
0x9500 0x0 0x0 0x1 &mpic 0x3 0x1
0x9500 0x0 0x0 0x2 &mpic 0x4 0x1
0x9500 0x0 0x0 0x3 &mpic 0x1 0x1
0x9500 0x0 0x0 0x4 &mpic 0x2 0x1
/* IDSEL 0x12 func 6 - PCI slot 2 */
0x9600 0x0 0x0 0x1 &mpic 0x3 0x1
0x9600 0x0 0x0 0x2 &mpic 0x4 0x1
0x9600 0x0 0x0 0x3 &mpic 0x1 0x1
0x9600 0x0 0x0 0x4 &mpic 0x2 0x1
/* IDSEL 0x12 func 7 - PCI slot 2 */
0x9700 0x0 0x0 0x1 &mpic 0x3 0x1
0x9700 0x0 0x0 0x2 &mpic 0x4 0x1
0x9700 0x0 0x0 0x3 &mpic 0x1 0x1
0x9700 0x0 0x0 0x4 &mpic 0x2 0x1
// IDSEL 0x1c USB
0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
// IDSEL 0x1d Audio
0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
// IDSEL 0x1e Legacy
0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
// IDSEL 0x1f IDE/SATA
0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
>;
pcie@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
......@@ -667,99 +47,14 @@ pcie@0 {
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x10000>;
uli1575@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x10000>;
isa@1e {
device_type = "isa";
#interrupt-cells = <2>;
#size-cells = <1>;
#address-cells = <2>;
reg = <0xf000 0x0 0x0 0x0 0x0>;
ranges = <0x1 0x0 0x1000000 0x0 0x0
0x1000>;
interrupt-parent = <&i8259>;
i8259: interrupt-controller@20 {
reg = <0x1 0x20 0x2
0x1 0xa0 0x2
0x1 0x4d0 0x2>;
interrupt-controller;
device_type = "interrupt-controller";
#address-cells = <0>;
#interrupt-cells = <2>;
compatible = "chrp,iic";
interrupts = <9 2>;
interrupt-parent = <&mpic>;
};
i8042@60 {
#size-cells = <0>;
#address-cells = <1>;
reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
interrupts = <1 3 12 3>;
interrupt-parent =
<&i8259>;
keyboard@0 {
reg = <0x0>;
compatible = "pnpPNP,303";
};
mouse@1 {
reg = <0x1>;
compatible = "pnpPNP,f03";
};
};
rtc@70 {
compatible = "pnpPNP,b00";
reg = <0x1 0x70 0x2>;
};
gpio@400 {
reg = <0x1 0x400 0x80>;
};
};
};
};
};
pci1: pcie@fffe09000 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0xf 0xffe09000 0 0x1000>;
bus-range = <0 255>;
ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x00010000>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
interrupts = <25 2>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0x0 0x0 0x1 &mpic 0x4 0x1
0000 0x0 0x0 0x2 &mpic 0x5 0x1
0000 0x0 0x0 0x3 &mpic 0x6 0x1
0000 0x0 0x0 0x4 &mpic 0x7 0x1
>;
pcie@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
......@@ -771,31 +66,10 @@ pcie@0 {
};
pci2: pcie@fffe0a000 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0xf 0xffe0a000 0 0x1000>;
bus-range = <0 255>;
ranges = <0x2000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x00010000>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
interrupts = <26 2>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0x0 0x0 0x1 &mpic 0x0 0x1
0000 0x0 0x0 0x2 &mpic 0x1 0x1
0000 0x0 0x0 0x3 &mpic 0x2 0x1
0000 0x0 0x0 0x4 &mpic 0x3 0x1
>;
pcie@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
......@@ -806,3 +80,11 @@ pcie@0 {
};
};
};
/*
* mpc8572ds.dtsi must be last to ensure board_pci0 overrides pci0 settings
* for interrupt-map & interrupt-map-mask
*/
/include/ "fsl/mpc8572si-post.dtsi"
/include/ "mpc8572ds.dtsi"
arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
View file @ 53291959
......@@ -14,494 +14,69 @@
* option) any later version.
*/
/dts-v1/;
/include/ "mpc8572ds.dts"
/ {
model = "fsl,MPC8572DS";
compatible = "fsl,MPC8572DS", "fsl,MPC8572DS-CAMP";
#address-cells = <1>;
#size-cells = <1>;
aliases {
ethernet0 = &enet0;
ethernet1 = &enet1;
serial0 = &serial0;
pci0 = &pci0;
pci1 = &pci1;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8572@0 {
device_type = "cpu";
reg = <0x0>;
d-cache-line-size = <32>; // 32 bytes
i-cache-line-size = <32>; // 32 bytes
d-cache-size = <0x8000>; // L1, 32K
i-cache-size = <0x8000>; // L1, 32K
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
next-level-cache = <&L2>;
};
PowerPC,8572@1 {
status = "disabled";
};
};
memory {
device_type = "memory";
reg = <0x0 0x0>; // Filled by U-Boot
localbus@ffe05000 {
status = "disabled";
};
soc8572@ffe00000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "simple-bus";
ranges = <0x0 0xffe00000 0x100000>;
bus-frequency = <0>; // Filled out by uboot.
ecm-law@0 {
compatible = "fsl,ecm-law";
reg = <0x0 0x1000>;
fsl,num-laws = <12>;
serial@4600 {
status = "disabled";
};
ecm@1000 {
compatible = "fsl,mpc8572-ecm", "fsl,ecm";
reg = <0x1000 0x1000>;
interrupts = <17 2>;
interrupt-parent = <&mpic>;
dma@c300 {
status = "disabled";
};
memory-controller@2000 {
compatible = "fsl,mpc8572-memory-controller";
reg = <0x2000 0x1000>;
interrupt-parent = <&mpic>;
interrupts = <18 2>;
gpio-controller@f000 {
};
memory-controller@6000 {
compatible = "fsl,mpc8572-memory-controller";
reg = <0x6000 0x1000>;
interrupt-parent = <&mpic>;
interrupts = <18 2>;
};
L2: l2-cache-controller@20000 {
compatible = "fsl,mpc8572-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes
l2-cache-controller@20000 {
cache-size = <0x80000>; // L2, 512K
interrupt-parent = <&mpic>;
interrupts = <16 2>;
};
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
ethernet@26000 {
status = "disabled";
};
i2c@3100 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <1>;
compatible = "fsl-i2c";
reg = <0x3100 0x100>;
interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
mdio@26520 {
status = "disabled";
};
dma@21300 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
reg = <0x21300 0x4>;
ranges = <0x0 0x21100 0x200>;
cell-index = <0>;
dma-channel@0 {
compatible = "fsl,mpc8572-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x0 0x80>;
cell-index = <0>;
interrupt-parent = <&mpic>;
interrupts = <20 2>;
};
dma-channel@80 {
compatible = "fsl,mpc8572-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x80 0x80>;
cell-index = <1>;
interrupt-parent = <&mpic>;
interrupts = <21 2>;
};
dma-channel@100 {
compatible = "fsl,mpc8572-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x100 0x80>;
cell-index = <2>;
interrupt-parent = <&mpic>;
interrupts = <22 2>;
};
dma-channel@180 {
compatible = "fsl,mpc8572-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x180 0x80>;
cell-index = <3>;
interrupt-parent = <&mpic>;
interrupts = <23 2>;
};
ethernet@27000 {
status = "disabled";
};
enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <0x0>;
};
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <10 1>;
reg = <0x1>;
};
};
mdio@27520 {
status = "disabled";
};
enet1: ethernet@25000 {
cell-index = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
};
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
pic@40000 {
protected-sources = <
31 32 33 37 38 39 /* enet2 enet3 */
76 77 78 79 26 42 /* dma2 pci2 serial*/
0xe4 0xe5 0xe6 0xe7 /* msi */
>;
};
msi@41600 {
compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
reg = <0x41600 0x80>;
msi-available-ranges = <0 0x80>;
interrupts = <
0xe0 0
0xe1 0
0xe2 0
0xe3 0>;
interrupt-parent = <&mpic>;
};
global-utilities@e0000 { //global utilities block
compatible = "fsl,mpc8572-guts";
reg = <0xe0000 0x1000>;
fsl,has-rstcr;
};
crypto@30000 {
compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
"fsl,sec2.1", "fsl,sec2.0";
reg = <0x30000 0x10000>;
interrupts = <45 2 58 2>;
interrupt-parent = <&mpic>;
fsl,num-channels = <4>;
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0x9fe>;
fsl,descriptor-types-mask = <0x3ab0ebf>;
};
mpic: pic@40000 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
protected-sources = <
31 32 33 37 38 39 /* enet2 enet3 */
76 77 78 79 26 42 /* dma2 pci2 serial*/
0xe4 0xe5 0xe6 0xe7 /* msi */
>;
};
};
pci0: pcie@ffe08000 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0xffe08000 0x1000>;
bus-range = <0 255>;
ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
0x1000000 0x0 0x0 0xffc00000 0x0 0x10000>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
interrupts = <24 2>;
interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x11 func 0 - PCI slot 1 */
0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
0x8800 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x11 func 1 - PCI slot 1 */
0x8900 0x0 0x0 0x1 &mpic 0x2 0x1
0x8900 0x0 0x0 0x2 &mpic 0x3 0x1
0x8900 0x0 0x0 0x3 &mpic 0x4 0x1
0x8900 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x11 func 2 - PCI slot 1 */
0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1
0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1
0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1
0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x11 func 3 - PCI slot 1 */
0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1
0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1
0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1
0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x11 func 4 - PCI slot 1 */
0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1
0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1
0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1
0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x11 func 5 - PCI slot 1 */
0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1
0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1
0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1
0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x11 func 6 - PCI slot 1 */
0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1
0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1
0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1
0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x11 func 7 - PCI slot 1 */
0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1
0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1
0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1
0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x12 func 0 - PCI slot 2 */
0x9000 0x0 0x0 0x1 &mpic 0x3 0x1
0x9000 0x0 0x0 0x2 &mpic 0x4 0x1
0x9000 0x0 0x0 0x3 &mpic 0x1 0x1
0x9000 0x0 0x0 0x4 &mpic 0x2 0x1
/* IDSEL 0x12 func 1 - PCI slot 2 */
0x9100 0x0 0x0 0x1 &mpic 0x3 0x1
0x9100 0x0 0x0 0x2 &mpic 0x4 0x1
0x9100 0x0 0x0 0x3 &mpic 0x1 0x1
0x9100 0x0 0x0 0x4 &mpic 0x2 0x1
/* IDSEL 0x12 func 2 - PCI slot 2 */
0x9200 0x0 0x0 0x1 &mpic 0x3 0x1
0x9200 0x0 0x0 0x2 &mpic 0x4 0x1
0x9200 0x0 0x0 0x3 &mpic 0x1 0x1
0x9200 0x0 0x0 0x4 &mpic 0x2 0x1
/* IDSEL 0x12 func 3 - PCI slot 2 */
0x9300 0x0 0x0 0x1 &mpic 0x3 0x1
0x9300 0x0 0x0 0x2 &mpic 0x4 0x1
0x9300 0x0 0x0 0x3 &mpic 0x1 0x1
0x9300 0x0 0x0 0x4 &mpic 0x2 0x1
/* IDSEL 0x12 func 4 - PCI slot 2 */
0x9400 0x0 0x0 0x1 &mpic 0x3 0x1
0x9400 0x0 0x0 0x2 &mpic 0x4 0x1
0x9400 0x0 0x0 0x3 &mpic 0x1 0x1
0x9400 0x0 0x0 0x4 &mpic 0x2 0x1
/* IDSEL 0x12 func 5 - PCI slot 2 */
0x9500 0x0 0x0 0x1 &mpic 0x3 0x1
0x9500 0x0 0x0 0x2 &mpic 0x4 0x1
0x9500 0x0 0x0 0x3 &mpic 0x1 0x1
0x9500 0x0 0x0 0x4 &mpic 0x2 0x1
/* IDSEL 0x12 func 6 - PCI slot 2 */
0x9600 0x0 0x0 0x1 &mpic 0x3 0x1
0x9600 0x0 0x0 0x2 &mpic 0x4 0x1
0x9600 0x0 0x0 0x3 &mpic 0x1 0x1
0x9600 0x0 0x0 0x4 &mpic 0x2 0x1
/* IDSEL 0x12 func 7 - PCI slot 2 */
0x9700 0x0 0x0 0x1 &mpic 0x3 0x1
0x9700 0x0 0x0 0x2 &mpic 0x4 0x1
0x9700 0x0 0x0 0x3 &mpic 0x1 0x1
0x9700 0x0 0x0 0x4 &mpic 0x2 0x1
// IDSEL 0x1c USB
0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
// IDSEL 0x1d Audio
0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
// IDSEL 0x1e Legacy
0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
// IDSEL 0x1f IDE/SATA
0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
>;
pcie@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x10000>;
uli1575@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x10000>;
isa@1e {
device_type = "isa";
#interrupt-cells = <2>;
#size-cells = <1>;
#address-cells = <2>;
reg = <0xf000 0x0 0x0 0x0 0x0>;
ranges = <0x1 0x0 0x1000000 0x0 0x0
0x1000>;
interrupt-parent = <&i8259>;
i8259: interrupt-controller@20 {
reg = <0x1 0x20 0x2
0x1 0xa0 0x2
0x1 0x4d0 0x2>;
interrupt-controller;
device_type = "interrupt-controller";
#address-cells = <0>;
#interrupt-cells = <2>;
compatible = "chrp,iic";
interrupts = <9 2>;
interrupt-parent = <&mpic>;
};
i8042@60 {
#size-cells = <0>;
#address-cells = <1>;
reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
interrupts = <1 3 12 3>;
interrupt-parent =
<&i8259>;
keyboard@0 {
reg = <0x0>;
compatible = "pnpPNP,303";
};
mouse@1 {
reg = <0x1>;
compatible = "pnpPNP,f03";
};
};
rtc@70 {
compatible = "pnpPNP,b00";
reg = <0x1 0x70 0x2>;
};
gpio@400 {
reg = <0x1 0x400 0x80>;
};
};
};
timer@42100 {
status = "disabled";
};
};
pci1: pcie@ffe09000 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0xffe09000 0x1000>;
bus-range = <0 255>;
ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x0 0xffc10000 0x0 0x10000>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
interrupts = <25 2>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0x0 0x0 0x1 &mpic 0x4 0x1
0000 0x0 0x0 0x2 &mpic 0x5 0x1
0000 0x0 0x0 0x3 &mpic 0x6 0x1
0000 0x0 0x0 0x4 &mpic 0x7 0x1
>;
pcie@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x10000>;
};
pcie@ffe0a000 {
status = "disabled";
};
};
arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
View file @ 53291959
......@@ -15,169 +15,74 @@
* option) any later version.
*/
/dts-v1/;
/include/ "mpc8572ds.dts"
/ {
model = "fsl,MPC8572DS";
compatible = "fsl,MPC8572DS", "fsl,MPC8572DS-CAMP";
#address-cells = <1>;
#size-cells = <1>;
aliases {
ethernet2 = &enet2;
ethernet3 = &enet3;
serial0 = &serial0;
pci2 = &pci2;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8572@0 {
status = "disabled";
};
PowerPC,8572@1 {
device_type = "cpu";
reg = <0x1>;
d-cache-line-size = <32>; // 32 bytes
i-cache-line-size = <32>; // 32 bytes
d-cache-size = <0x8000>; // L1, 32K
i-cache-size = <0x8000>; // L1, 32K
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
next-level-cache = <&L2>;
};
};
memory {
device_type = "memory";
reg = <0x0 0x0>; // Filled by U-Boot
localbus@ffe05000 {
status = "disabled";
};
soc8572@ffe00000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "simple-bus";
ranges = <0x0 0xffe00000 0x100000>;
bus-frequency = <0>; // Filled out by uboot.
L2: l2-cache-controller@20000 {
compatible = "fsl,mpc8572-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes
cache-size = <0x80000>; // L2, 512K
interrupt-parent = <&mpic>;
ecm-law@0 {
status = "disabled";
};
dma@c300 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
reg = <0xc300 0x4>;
ranges = <0x0 0xc100 0x200>;
cell-index = <0>;
dma-channel@0 {
compatible = "fsl,mpc8572-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x0 0x80>;
cell-index = <0>;
interrupt-parent = <&mpic>;
interrupts = <76 2>;
};
dma-channel@80 {
compatible = "fsl,mpc8572-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x80 0x80>;
cell-index = <1>;
interrupt-parent = <&mpic>;
interrupts = <77 2>;
};
dma-channel@100 {
compatible = "fsl,mpc8572-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x100 0x80>;
cell-index = <2>;
interrupt-parent = <&mpic>;
interrupts = <78 2>;
};
dma-channel@180 {
compatible = "fsl,mpc8572-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x180 0x80>;
cell-index = <3>;
interrupt-parent = <&mpic>;
interrupts = <79 2>;
};
ecm@1000 {
status = "disabled";
};
memory-controller@2000 {
status = "disabled";
};
memory-controller@6000 {
status = "disabled";
};
i2c@3000 {
status = "disabled";
};
i2c@3100 {
status = "disabled";
};
serial@4500 {
status = "disabled";
};
gpio-controller@f000 {
status = "disabled";
};
l2-cache-controller@20000 {
cache-size = <0x80000>; // L2, 512K
};
dma@21300 {
status = "disabled";
};
ethernet@24000 {
status = "disabled";
};
mdio@24520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x24520 0x20>;
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
reg = <0x2>;
};
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
reg = <0x3>;
};
status = "disabled";
};
enet2: ethernet@26000 {
cell-index = <2>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x26000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy2>;
phy-connection-type = "rgmii-id";
ptp_clock@24e00 {
status = "disabled";
};
enet3: ethernet@27000 {
cell-index = <3>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x27000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <37 2 38 2 39 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy3>;
phy-connection-type = "rgmii-id";
ethernet@25000 {
status = "disabled";
};
msi@41600 {
compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
reg = <0x41600 0x80>;
msi-available-ranges = <0x80 0x80>;
interrupts = <
0xe4 0
0xe5 0
0xe6 0
0xe7 0>;
interrupt-parent = <&mpic>;
mdio@25520 {
status = "disabled";
};
serial0: serial@4600 {
cell-index = <1>;
device_type = "serial";
compatible = "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
crypto@30000 {
status = "disabled";
};
mpic: pic@40000 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
pic@40000 {
protected-sources = <
18 16 10 42 45 58 /* MEM L2 mdio serial crypto */
29 30 34 35 36 40 /* enet0 enet1 */
......@@ -189,41 +94,25 @@ mpic: pic@40000 {
0xe0 0xe1 0xe2 0xe3 /* msi */
>;
};
};
pci2: pcie@ffe0a000 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0xffe0a000 0x1000>;
bus-range = <0 255>;
ranges = <0x2000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000
0x1000000 0x0 0x0 0xffc20000 0x0 0x10000>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
interrupts = <26 2>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0x0 0x0 0x1 &mpic 0x0 0x1
0000 0x0 0x0 0x2 &mpic 0x1 0x1
0000 0x0 0x0 0x3 &mpic 0x2 0x1
0000 0x0 0x0 0x4 &mpic 0x3 0x1
>;
pcie@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
ranges = <0x2000000 0x0 0xc0000000
0x2000000 0x0 0xc0000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x10000>;
timer@41100 {
status = "disabled";
};
msi@41600 {
msi-available-ranges = <0x80 0x80>;
interrupts = <
0xe4 0
0xe5 0
0xe6 0
0xe7 0>;
};
global-utilities@e0000 {
status = "disabled";
};
};
pcie@ffe08000 {
status = "disabled";
};
pcie@ffe09000 {
status = "disabled";
};
};
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7