Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

Pull powerpc merge from Benjamin Herrenschmidt:
 "Here's the powerpc batch for this merge window.  It is going to be a
  bit more nasty than usual as in touching things outside of
  arch/powerpc mostly due to the big iSeriesectomy :-) We finally got
  rid of the bugger (legacy iSeries support) which was a PITA to
  maintain and that nobody really used anymore.

  Here are some of the highlights:

   - Legacy iSeries is gone.  Thanks Stephen ! There's still some bits
     and pieces remaining if you do a grep -ir series arch/powerpc but
     they are harmless and will be removed in the next few weeks
     hopefully.

   - The 'fadump' functionality (Firmware Assisted Dump) replaces the
     previous (equivalent) "pHyp assisted dump"...  it's a rewrite of a
     mechanism to get the hypervisor to do crash dumps on pSeries, the
     new implementation hopefully being much more reliable.  Thanks
     Mahesh Salgaonkar.

   - The "EEH" code (pSeries PCI error handling & recovery) got a big
     spring cleaning, motivated by the need to be able to implement a
     new backend for it on top of some new different type of firwmare.

     The work isn't complete yet, but a good chunk of the cleanups is
     there.  Note that this adds a field to struct device_node which is
     not very nice and which Grant objects to.  I will have a patch soon
     that moves that to a powerpc private data structure (hopefully
     before rc1) and we'll improve things further later on (hopefully
     getting rid of the need for that pointer completely).  Thanks Gavin
     Shan.

   - I dug into our exception & interrupt handling code to improve the
     way we do lazy interrupt handling (and make it work properly with
     "edge" triggered interrupt sources), and while at it found & fixed
     a wagon of issues in those areas, including adding support for page
     fault retry & fatal signals on page faults.

   - Your usual random batch of small fixes & updates, including a bunch
     of new embedded boards, both Freescale and APM based ones, etc..."

I fixed up some conflicts with the generalized irq-domain changes from
Grant Likely, hopefully correctly.

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (141 commits)
  powerpc/ps3: Do not adjust the wrapper load address
  powerpc: Remove the rest of the legacy iSeries include files
  powerpc: Remove the remaining CONFIG_PPC_ISERIES pieces
  init: Remove CONFIG_PPC_ISERIES
  powerpc: Remove FW_FEATURE ISERIES from arch code
  tty/hvc_vio: FW_FEATURE_ISERIES is no longer selectable
  powerpc/spufs: Fix double unlocks
  powerpc/5200: convert mpc5200 to use of_platform_populate()
  powerpc/mpc5200: add options to mpc5200_defconfig
  powerpc/mpc52xx: add a4m072 board support
  powerpc/mpc5200: update mpc5200_defconfig to fit for charon board
  Documentation/powerpc/mpc52xx.txt: Checkpatch cleanup
  powerpc/44x: Add additional device support for APM821xx SoC and Bluestone board
  powerpc/44x: Add support PCI-E for APM821xx SoC and Bluestone board
  MAINTAINERS: Update PowerPC 4xx tree
  powerpc/44x: The bug fixed support for APM821xx SoC and Bluestone board
  powerpc: document the FSL MPIC message register binding
  powerpc: add support for MPIC message register API
  powerpc/fsl: Added aliased MSIIR register address to MSI node in dts
  powerpc/85xx: mpc8548cds - add 36-bit dts
  ...

Documentation/devicetree/bindings/powerpc/fsl/mpic-msgr.txt

+* FSL MPIC Message Registers
+
+This binding specifies what properties must be available in the device tree
+representation of the message register blocks found in some FSL MPIC
+implementations.
+
+Required properties:
+
+    - compatible: Specifies the compatibility list for the message register
+      block.  The type shall be <string-list> and the value shall be of the form
+      "fsl,mpic-v<version>-msgr", where <version> is the version number of
+      the MPIC containing the message registers.
+
+    - reg: Specifies the base physical address(s) and size(s) of the
+      message register block's addressable register space.  The type shall be
+      <prop-encoded-array>.
+
+    - interrupts: Specifies a list of interrupt-specifiers which are available
+      for receiving interrupts. Interrupt-specifier consists of two cells: first
+      cell is interrupt-number and second cell is level-sense. The type shall be
+      <prop-encoded-array>.
+
+Optional properties:
+
+    - mpic-msgr-receive-mask: Specifies what registers in the containing block
+      are allowed to receive interrupts. The value is a bit mask where a set
+      bit at bit 'n' indicates that message register 'n' can receive interrupts.
+      Note that "bit 'n'" is numbered from LSB for PPC hardware. The type shall
+      be <u32>. If not present, then all of the message registers in the block
+      are available.
+
+Aliases:
+
+    An alias should be created for every message register block.  They are not
+    required, though.  However, a particular implementation of this binding
+    may require aliases to be present.  Aliases are of the form
+    'mpic-msgr-block<n>', where <n> is an integer specifying the block's number.
+    Numbers shall start at 0.
+
+Example:
+
+	aliases {
+		mpic-msgr-block0 = &mpic_msgr_block0;
+		mpic-msgr-block1 = &mpic_msgr_block1;
+	};
+
+	mpic_msgr_block0: mpic-msgr-block@41400 {
+		compatible = "fsl,mpic-v3.1-msgr";
+		reg = <0x41400 0x200>;
+		// Message registers 0 and 2 in this block can receive interrupts on
+		// sources 0xb0 and 0xb2, respectively.
+		interrupts = <0xb0 2 0xb2 2>;
+		mpic-msgr-receive-mask = <0x5>;
+	};
+
+	mpic_msgr_block1: mpic-msgr-block@42400 {
+		compatible = "fsl,mpic-v3.1-msgr";
+		reg = <0x42400 0x200>;
+		// Message registers 0 and 2 in this block can receive interrupts on
+		// sources 0xb4 and 0xb6, respectively.
+		interrupts = <0xb4 2 0xb6 2>;
+		mpic-msgr-receive-mask = <0x5>;
+	};

Documentation/devicetree/bindings/powerpc/fsl/mpic.txt

@@ -57,6 +57,26 @@ PROPERTIES
           that any initialization related to interrupt sources shall
           be limited to sources explicitly referenced in the device tree.
 
+  - big-endian
+      Usage: optional
+      Value type: <empty>
+          If present the MPIC will be assumed to be big-endian.  Some
+          device-trees omit this property on MPIC nodes even when the MPIC is
+          in fact big-endian, so certain boards override this property.
+
+  - single-cpu-affinity
+      Usage: optional
+      Value type: <empty>
+          If present the MPIC will be assumed to only be able to route
+          non-IPI interrupts to a single CPU at a time (EG: Freescale MPIC).
+
+  - last-interrupt-source
+      Usage: optional
+      Value type: <u32>
+          Some MPICs do not correctly report the number of hardware sources
+          in the global feature registers.  If specified, this field will
+          override the value read from MPIC_GREG_FEATURE_LAST_SRC.
+
 INTERRUPT SPECIFIER DEFINITION
 
   Interrupt specifiers consists of 4 cells encoded as

Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt

@@ -6,8 +6,10 @@ Required properties:
   etc.) and the second is "fsl,mpic-msi" or "fsl,ipic-msi" depending on
   the parent type.
 
-- reg : should contain the address and the length of the shared message
-  interrupt register set.
+- reg : It may contain one or two regions. The first region should contain
+  the address and the length of the shared message interrupt register set.
+  The second region should contain the address of aliased MSIIR register for
+  platforms that have such an alias.
 
 - msi-available-ranges: use <start count> style section to define which
   msi interrupt can be used in the 256 msi interrupts. This property is

Documentation/powerpc/phyp-assisted-dump.txt

-
-                   Hypervisor-Assisted Dump
-                   ------------------------
-                       November 2007
-
-The goal of hypervisor-assisted dump is to enable the dump of
-a crashed system, and to do so from a fully-reset system, and
-to minimize the total elapsed time until the system is back
-in production use.
-
-As compared to kdump or other strategies, hypervisor-assisted
-dump offers several strong, practical advantages:
-
--- Unlike kdump, the system has been reset, and loaded
-   with a fresh copy of the kernel.  In particular,
-   PCI and I/O devices have been reinitialized and are
-   in a clean, consistent state.
--- As the dump is performed, the dumped memory becomes
-   immediately available to the system for normal use.
--- After the dump is completed, no further reboots are
-   required; the system will be fully usable, and running
-   in its normal, production mode on its normal kernel.
-
-The above can only be accomplished by coordination with,
-and assistance from the hypervisor. The procedure is
-as follows:
-
--- When a system crashes, the hypervisor will save
-   the low 256MB of RAM to a previously registered
-   save region. It will also save system state, system
-   registers, and hardware PTE's.
-
--- After the low 256MB area has been saved, the
-   hypervisor will reset PCI and other hardware state.
-   It will *not* clear RAM. It will then launch the
-   bootloader, as normal.
-
--- The freshly booted kernel will notice that there
-   is a new node (ibm,dump-kernel) in the device tree,
-   indicating that there is crash data available from
-   a previous boot. It will boot into only 256MB of RAM,
-   reserving the rest of system memory.
-
--- Userspace tools will parse /sys/kernel/release_region
-   and read /proc/vmcore to obtain the contents of memory,
-   which holds the previous crashed kernel. The userspace
-   tools may copy this info to disk, or network, nas, san,
-   iscsi, etc. as desired.
-
-   For Example: the values in /sys/kernel/release-region
-   would look something like this (address-range pairs).
-   CPU:0x177fee000-0x10000: HPTE:0x177ffe020-0x1000: /
-   DUMP:0x177fff020-0x10000000, 0x10000000-0x16F1D370A
-
--- As the userspace tools complete saving a portion of
-   dump, they echo an offset and size to
-   /sys/kernel/release_region to release the reserved
-   memory back to general use.
-
-   An example of this is:
-     "echo 0x40000000 0x10000000 > /sys/kernel/release_region"
-   which will release 256MB at the 1GB boundary.
-
-Please note that the hypervisor-assisted dump feature
-is only available on Power6-based systems with recent
-firmware versions.
-
-Implementation details:
-----------------------
-
-During boot, a check is made to see if firmware supports
-this feature on this particular machine. If it does, then
-we check to see if a active dump is waiting for us. If yes
-then everything but 256 MB of RAM is reserved during early
-boot. This area is released once we collect a dump from user
-land scripts that are run. If there is dump data, then
-the /sys/kernel/release_region file is created, and
-the reserved memory is held.
-
-If there is no waiting dump data, then only the highest
-256MB of the ram is reserved as a scratch area. This area
-is *not* released: this region will be kept permanently
-reserved, so that it can act as a receptacle for a copy
-of the low 256MB in the case a crash does occur. See,
-however, "open issues" below, as to whether
-such a reserved region is really needed.
-
-Currently the dump will be copied from /proc/vmcore to a
-a new file upon user intervention. The starting address
-to be read and the range for each data point in provided
-in /sys/kernel/release_region.
-
-The tools to examine the dump will be same as the ones
-used for kdump.
-
-General notes:
---------------
-Security: please note that there are potential security issues
-with any sort of dump mechanism. In particular, plaintext
-(unencrypted) data, and possibly passwords, may be present in
-the dump data. Userspace tools must take adequate precautions to
-preserve security.
-
-Open issues/ToDo:
-------------
- o The various code paths that tell the hypervisor that a crash
-   occurred, vs. it simply being a normal reboot, should be
-   reviewed, and possibly clarified/fixed.
-
- o Instead of using /sys/kernel, should there be a /sys/dump
-   instead? There is a dump_subsys being created by the s390 code,
-   perhaps the pseries code should use a similar layout as well.
-
- o Is reserving a 256MB region really required? The goal of
-   reserving a 256MB scratch area is to make sure that no
-   important crash data is clobbered when the hypervisor
-   save low mem to the scratch area. But, if one could assure
-   that nothing important is located in some 256MB area, then
-   it would not need to be reserved. Something that can be
-   improved in subsequent versions.
-
- o Still working the kdump team to integrate this with kdump,
-   some work remains but this would not affect the current
-   patches.
-
- o Still need to write a shell script, to copy the dump away.
-   Currently I am parsing it manually.

MAINTAINERS

@@ -4071,7 +4071,7 @@ M:	Josh Boyer <jwboyer@gmail.com>
 M:	Matt Porter <mporter@kernel.crashing.org>
 W:	http://www.penguinppc.org/
 L:	linuxppc-dev@lists.ozlabs.org
-T:	git git://git.infradead.org/users/jwboyer/powerpc-4xx.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx.git
 S:	Maintained
 F:	arch/powerpc/platforms/40x/
 F:	arch/powerpc/platforms/44x/

arch/powerpc/Kconfig

@@ -134,6 +134,7 @@ config PPC
 	select HAVE_HW_BREAKPOINT if PERF_EVENTS && PPC_BOOK3S_64
 	select HAVE_GENERIC_HARDIRQS
 	select HAVE_SPARSE_IRQ
+	select SPARSE_IRQ
 	select IRQ_PER_CPU
 	select IRQ_DOMAIN
 	select GENERIC_IRQ_SHOW
@@ -377,13 +378,16 @@ config CRASH_DUMP
 	  The same kernel binary can be used as production kernel and dump
 	  capture kernel.
 
-config PHYP_DUMP
-	bool "Hypervisor-assisted dump (EXPERIMENTAL)"
-	depends on PPC_PSERIES && EXPERIMENTAL
+config FA_DUMP
+	bool "Firmware-assisted dump"
+	depends on PPC64 && PPC_RTAS && CRASH_DUMP
 	help
-	  Hypervisor-assisted dump is meant to be a kdump replacement
-	  offering robustness and speed not possible without system
-	  hypervisor assistance.
+	  A robust mechanism to get reliable kernel crash dump with
+	  assistance from firmware. This approach does not use kexec,
+	  instead firmware assists in booting the kdump kernel
+	  while preserving memory contents. Firmware-assisted dump
+	  is meant to be a kdump replacement offering robustness and
+	  speed not possible without system firmware assistance.
 
 	  If unsure, say "N"
 
@@ -612,7 +616,7 @@ endmenu
 
 config ISA_DMA_API
 	bool
-	default !PPC_ISERIES || PCI
+	default PCI
 
 menu "Bus options"
 

arch/powerpc/Kconfig.debug

@@ -196,13 +196,6 @@ config PPC_EARLY_DEBUG_MAPLE
 	help
 	  Select this to enable early debugging for Maple.
 
-config PPC_EARLY_DEBUG_ISERIES
-	bool "iSeries HV Console"
-	depends on PPC_ISERIES
-	help
-	  Select this to enable early debugging for legacy iSeries. You need
-	  to hit "Ctrl-x Ctrl-x" to see the messages on the console.
-
 config PPC_EARLY_DEBUG_PAS_REALMODE
 	bool "PA Semi real mode"
 	depends on PPC_PASEMI

arch/powerpc/Makefile

@@ -157,6 +157,7 @@ core-y				+= arch/powerpc/kernel/ \
 				   arch/powerpc/net/
 core-$(CONFIG_XMON)		+= arch/powerpc/xmon/
 core-$(CONFIG_KVM) 		+= arch/powerpc/kvm/
+core-$(CONFIG_PERF_EVENTS)	+= arch/powerpc/perf/
 
 drivers-$(CONFIG_OPROFILE)	+= arch/powerpc/oprofile/
 

arch/powerpc/boot/Makefile

@@ -184,7 +184,6 @@ image-$(CONFIG_PPC_EFIKA)		+= zImage.chrp
 image-$(CONFIG_PPC_PMAC)		+= zImage.pmac
 image-$(CONFIG_PPC_HOLLY)		+= dtbImage.holly
 image-$(CONFIG_PPC_PRPMC2800)		+= dtbImage.prpmc2800
-image-$(CONFIG_PPC_ISERIES)		+= zImage.iseries
 image-$(CONFIG_DEFAULT_UIMAGE)		+= uImage
 image-$(CONFIG_EPAPR_BOOT)		+= zImage.epapr
 
@@ -247,7 +246,7 @@ image-$(CONFIG_ASP834x)			+= dtbImage.asp834x-redboot
 image-$(CONFIG_MPC8540_ADS)		+= cuImage.mpc8540ads
 image-$(CONFIG_MPC8560_ADS)		+= cuImage.mpc8560ads
 image-$(CONFIG_MPC85xx_CDS)		+= cuImage.mpc8541cds \
-					   cuImage.mpc8548cds \
+					   cuImage.mpc8548cds_32b \
 					   cuImage.mpc8555cds
 image-$(CONFIG_MPC85xx_MDS)		+= cuImage.mpc8568mds
 image-$(CONFIG_MPC85xx_DS)		+= cuImage.mpc8544ds \
@@ -311,12 +310,6 @@ $(obj)/dtbImage.%: vmlinux $(wrapperbits) $(obj)/%.dtb
 $(obj)/vmlinux.strip: vmlinux
 	$(STRIP) -s -R .comment $< -o $@
 
-# The iseries hypervisor won't take an ET_DYN executable, so this
-# changes the type (byte 17) in the file to ET_EXEC (2).
-$(obj)/zImage.iseries: vmlinux
-	$(STRIP) -s -R .comment $< -o $@
-	printf "\x02" | dd of=$@ conv=notrunc bs=1 seek=17
-
 $(obj)/uImage: vmlinux $(wrapperbits)
 	$(call if_changed,wrap,uboot)
 
@@ -364,7 +357,7 @@ install: $(CONFIGURE) $(addprefix $(obj)/, $(image-y))
 # anything not in $(targets)
 clean-files += $(image-) $(initrd-) cuImage.* dtbImage.* treeImage.* \
 	zImage zImage.initrd zImage.chrp zImage.coff zImage.holly \
-	zImage.iseries zImage.miboot zImage.pmac zImage.pseries \
+	zImage.miboot zImage.pmac zImage.pseries \
 	zImage.maple simpleImage.* otheros.bld *.dtb
 
 # clean up files cached by wrapper

arch/powerpc/boot/dts/a4m072.dts

+/*
+ * a4m072 board Device Tree Source
+ *
+ * Copyright (C) 2011 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ *
+ * Copyright (C) 2007 Semihalf
+ * Marian Balakowicz <m8@semihalf.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "mpc5200b.dtsi"
+
+/ {
+	model = "anonymous,a4m072";
+	compatible = "anonymous,a4m072";
+
+	soc5200@f0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc5200b-immr";
+		ranges = <0 0xf0000000 0x0000c000>;
+		reg = <0xf0000000 0x00000100>;
+		bus-frequency = <0>; /* From boot loader */
+		system-frequency = <0>; /* From boot loader */
+
+		cdm@200 {
+			fsl,init-ext-48mhz-en = <0x0>;
+			fsl,init-fd-enable = <0x01>;
+			fsl,init-fd-counters = <0x3333>;
+		};
+
+		timer@600 {
+			fsl,has-wdt;
+		};
+
+		gpt3: timer@630 { /* General Purpose Timer in GPIO mode */
+			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpt4: timer@640 { /* General Purpose Timer in GPIO mode */
+			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpt5: timer@650 { /* General Purpose Timer in GPIO mode */
+			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		spi@f00 {
+			status = "disabled";
+		};
+
+		psc@2000 {
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2000 0x100>;
+			interrupts = <2 1 0>;
+		};
+
+		psc@2200 {
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2200 0x100>;
+			interrupts = <2 2 0>;
+		};
+
+		psc@2400 {
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2400 0x100>;
+			interrupts = <2 3 0>;
+		};
+
+		psc@2600 {
+			status = "disabled";
+		};
+
+		psc@2800 {
+			status = "disabled";
+		};
+
+		psc@2c00 {
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			reg = <0x2c00 0x100>;
+			interrupts = <2 4 0>;
+		};
+
+		ethernet@3000 {
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			phy0: ethernet-phy@1f {
+				reg = <0x1f>;
+				interrupts = <1 2 0>; /* IRQ 2 active low */
+			};
+		};
+
+		i2c@3d00 {
+			status = "disabled";
+		};
+
+		i2c@3d40 {
+			hwmon@2e {
+				compatible = "nsc,lm87";
+				reg = <0x2e>;
+			};
+			rtc@51 {
+				compatible = "nxp,rtc8564";
+				reg = <0x51>;
+			};
+		};
+	};
+
+	localbus {
+		compatible = "fsl,mpc5200b-lpb","simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0xfe000000 0x02000000
+			  1 0 0x62000000 0x00400000
+			  2 0 0x64000000 0x00200000
+			  3 0 0x66000000 0x01000000
+			  6 0 0x68000000 0x01000000
+			  7 0 0x6a000000 0x00000004>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x02000000>;
+			bank-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+		};
+		sram0@1,0 {
+			compatible = "mtd-ram";
+			reg = <1 0x00000 0x00400000>;
+			bank-width = <2>;
+		};
+	};
+
+	pci@f0000d00 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		compatible = "fsl,mpc5200-pci";
+		reg = <0xf0000d00 0x100>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+				 /* IDSEL 0x16 */
+				 0xc000 0 0 1 &mpc5200_pic 1 3 3
+				 0xc000 0 0 2 &mpc5200_pic 1 3 3
+				 0xc000 0 0 3 &mpc5200_pic 1 3 3
+				 0xc000 0 0 4 &mpc5200_pic 1 3 3>;
+		clock-frequency = <0>; /* From boot loader */
+		interrupts = <2 8 0 2 9 0 2 10 0>;
+		bus-range = <0 0>;
+		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000
+			  0x02000000 0 0x90000000 0x90000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
+	};
+};

arch/powerpc/boot/dts/bluestone.dts

@@ -33,7 +33,7 @@ / {
 	aliases {
 		ethernet0 = &EMAC0;
 		serial0 = &UART0;
-		//serial1 = &UART1; --gcl missing UART1 label
+		serial1 = &UART1;
 	};
 
 	cpus {
@@ -52,7 +52,7 @@ cpu@0 {
 			d-cache-size = <32768>;
 			dcr-controller;
 			dcr-access-method = "native";
-			//next-level-cache = <&L2C0>; --gcl missing L2C0 label
+			next-level-cache = <&L2C0>;
 		};
 	};
 
@@ -117,6 +117,16 @@ CPR0: cpr {
 		dcr-reg = <0x00c 0x002>;
 	};
 
+	L2C0: l2c {
+		compatible = "ibm,l2-cache-apm82181", "ibm,l2-cache";
+		dcr-reg = <0x020 0x008
+			   0x030 0x008>;
+		cache-line-size = <32>;
+		cache-size = <262144>;
+		interrupt-parent = <&UIC1>;
+		interrupts = <11 1>;
+	};
+
 	plb {
 		compatible = "ibm,plb4";
 		#address-cells = <2>;
@@ -182,6 +192,53 @@ partition@1a0000 {
 						reg = <0x001a0000 0x00060000>;
 					};
 				};
+
+				ndfc@1,0 {
+					compatible = "ibm,ndfc";
+					reg = <0x00000003 0x00000000 0x00002000>;
+					ccr = <0x00001000>;
+					bank-settings = <0x80002222>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					/* 2Gb Nand Flash */
+					nand {
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						partition@0 {
+							label = "firmware";
+							reg   = <0x00000000 0x00C00000>;
+						};
+						partition@c00000 {
+							label = "environment";
+							reg   = <0x00C00000 0x00B00000>;
+						};
+						partition@1700000 {
+							label = "kernel";
+							reg   = <0x01700000 0x00E00000>;
+						};
+						partition@2500000 {
+							label = "root";
+							reg   = <0x02500000 0x08200000>;
+						};
+						partition@a700000 {
+							label = "device-tree";
+							reg   = <0x0A700000 0x00B00000>;
+						};
+						partition@b200000 {
+							label = "config";
+							reg   = <0x0B200000 0x00D00000>;
+						};
+						partition@bf00000 {
+							label = "diag";
+							reg   = <0x0BF00000 0x00C00000>;
+						};
+						partition@cb00000 {
+							label = "vendor";
+							reg   = <0x0CB00000 0x3500000>;
+						};
+					};
+				};
 			};
 
 			UART0: serial@ef600300 {
@@ -195,11 +252,36 @@ UART0: serial@ef600300 {
 				interrupts = <0x1 0x4>;
 			};
 
+			UART1: serial@ef600400 {
+				device_type = "serial";
+				compatible = "ns16550";
+				reg = <0xef600400 0x00000008>;
+				virtual-reg = <0xef600400>;
+				clock-frequency = <0>; /* Filled in by U-Boot */
+				current-speed = <0>; /* Filled in by U-Boot */
+				interrupt-parent = <&UIC0>;
+				interrupts = <0x1 0x4>;
+			};
+
 			IIC0: i2c@ef600700 {
 				compatible = "ibm,iic";
 				reg = <0xef600700 0x00000014>;
 				interrupt-parent = <&UIC0>;
 				interrupts = <0x2 0x4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				rtc@68 {
+					compatible = "stm,m41t80";
+					reg = <0x68>;
+					interrupt-parent = <&UIC0>;
+					interrupts = <0x9 0x8>;
+				};
+				sttm@4C {
+					compatible = "adm,adm1032";
+					reg = <0x4C>;
+					interrupt-parent = <&UIC1>;
+					interrupts = <0x1E 0x8>; /* CPU_THERNAL_L */
+				};
 			};
 
 			IIC1: i2c@ef600800 {
@@ -250,5 +332,46 @@ EMAC0: ethernet@ef600c00 {
 			};
 		};
 
+		PCIE0: pciex@d00000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb-pciex-apm821xx", "ibm,plb-pciex";
+			primary;
+			port = <0x0>; /* port number */
+			reg = <0x0000000d 0x00000000 0x20000000	/* Config space access */
+			       0x0000000c 0x08010000 0x00001000>;	/* Registers */
+			dcr-reg = <0x100 0x020>;
+			sdr-base = <0x300>;
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed
+			 */
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+				  0x02000000 0x00000000 0x00000000 0x0000000f 0x00000000 0x00000000 0x00100000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+			/* This drives busses 40 to 0x7f */
+			bus-range = <0x40 0x7f>;
+
+			/* Legacy interrupts (note the weird polarity, the bridge seems
+			 * to invert PCIe legacy interrupts).
+			 * We are de-swizzling here because the numbers are actually for
+			 * port of the root complex virtual P2P bridge. But I want
+			 * to avoid putting a node for it in the tree, so the numbers
+			 * below are basically de-swizzled numbers.
+			 * The real slot is on idsel 0, so the swizzling is 1:1
+			 */
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <
+				0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>;
+		};
 	};
 };

arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi

@@ -202,7 +202,7 @@ L2: l2-cache-controller@20000 {
 /include/ "pq3-etsec1-timer-0.dtsi"
 
 	usb@22000 {
-		compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
+		compatible = "fsl-usb2-mph-v1.2", "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
 		reg = <0x22000 0x1000>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -210,7 +210,7 @@ usb@22000 {
 	};
 
 	usb@23000 {
-		compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
+		compatible = "fsl-usb2-mph-v1.2", "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
 		reg = <0x23000 0x1000>;
 		#address-cells = <1>;
 		#size-cells = <0>;

arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi

@@ -89,6 +89,21 @@ pcie@0 {
 	};
 };
 
+&rio {
+	compatible = "fsl,srio";
+	interrupts = <48 2 0 0>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+	fsl,srio-rmu-handle = <&rmu>;
+	ranges;
+
+	port1 {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		cell-index = <1>;
+	};
+};
+
 &soc {
 	#address-cells = <1>;
 	#size-cells = <1>;
@@ -134,6 +149,7 @@ L2: l2-cache-controller@20000 {
 
 /include/ "pq3-sec2.1-0.dtsi"
 /include/ "pq3-mpic.dtsi"
+/include/ "pq3-rmu-0.dtsi"
 
 	global-utilities@e0000 {
 		compatible = "fsl,mpc8548-guts";

arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi

@@ -43,7 +43,9 @@ aliases {
 		serial0 = &serial0;
 		serial1 = &serial1;
 		ethernet0 = &enet0;
-		ethernet1 = &enet2;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
 		pci0 = &pci0;
 		pci1 = &pci1;
 		pci2 = &pci2;

arch/powerpc/boot/dts/fsl/p1010si-post.dtsi

@@ -156,6 +156,9 @@ L2: l2-cache-controller@20000 {
 
 /include/ "pq3-dma-0.dtsi"
 /include/ "pq3-usb2-dr-0.dtsi"
+	usb@22000 {
+		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
+	};
 /include/ "pq3-esdhc-0.dtsi"
 	sdhc@2e000 {
 		compatible = "fsl,p1010-esdhc", "fsl,esdhc";

arch/powerpc/boot/dts/fsl/p1020si-post.dtsi

@@ -142,7 +142,13 @@ L2: l2-cache-controller@20000 {
 
 /include/ "pq3-dma-0.dtsi"
 /include/ "pq3-usb2-dr-0.dtsi"
+	usb@22000 {
+		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
+	};
 /include/ "pq3-usb2-dr-1.dtsi"
+	usb@23000 {
+		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
+	};
 
 /include/ "pq3-esdhc-0.dtsi"
 	sdhc@2e000 {

arch/powerpc/boot/dts/fsl/p1021si-post.dtsi

@@ -142,8 +142,15 @@ L2: l2-cache-controller@20000 {
 
 /include/ "pq3-dma-0.dtsi"
 /include/ "pq3-usb2-dr-0.dtsi"
+	usb@22000 {
+		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
+	};
 
 /include/ "pq3-esdhc-0.dtsi"
+	sdhc@2e000 {
+		sdhci,auto-cmd12;
+	};
+
 /include/ "pq3-sec3.3-0.dtsi"
 
 /include/ "pq3-mpic.dtsi"

arch/powerpc/boot/dts/fsl/p1022si-post.dtsi

@@ -35,7 +35,11 @@
 &lbc {
 	#address-cells = <2>;
 	#size-cells = <1>;
-	compatible = "fsl,p1022-elbc", "fsl,elbc", "simple-bus";
+	/*
+	 * The localbus on the P1022 is not a simple-bus because of the eLBC
+	 * pin muxing when the DIU is enabled.
+	 */
+	compatible = "fsl,p1022-elbc", "fsl,elbc";
 	interrupts = <19 2 0 0>;
 };
 
@@ -199,7 +203,13 @@ L2: l2-cache-controller@20000 {
 
 /include/ "pq3-dma-0.dtsi"
 /include/ "pq3-usb2-dr-0.dtsi"
+	usb@22000 {
+		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
+	};
 /include/ "pq3-usb2-dr-1.dtsi"
+	usb@23000 {
+		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
+	};
 
 /include/ "pq3-esdhc-0.dtsi"
 	sdhc@2e000 {

arch/powerpc/boot/dts/fsl/p1023si-post.dtsi

@@ -142,6 +142,9 @@ L2: l2-cache-controller@20000 {
 
 /include/ "pq3-dma-0.dtsi"
 /include/ "pq3-usb2-dr-0.dtsi"
+	usb@22000 {
+		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
+	};
 
 	crypto: crypto@300000 {
 		compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";

arch/powerpc/boot/dts/fsl/p2020si-post.dtsi

@@ -171,6 +171,9 @@ L2: l2-cache-controller@20000 {
 
 /include/ "pq3-dma-0.dtsi"
 /include/ "pq3-usb2-dr-0.dtsi"
+	usb@22000 {
+		compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr";
+	};
 /include/ "pq3-etsec1-0.dtsi"
 /include/ "pq3-etsec1-timer-0.dtsi"
 

arch/powerpc/boot/dts/fsl/p2041si-post.dtsi

@@ -309,12 +309,14 @@ sdhc@114000 {
 /include/ "qoriq-gpio-0.dtsi"
 /include/ "qoriq-usb2-mph-0.dtsi"
 		usb0: usb@210000 {
+			compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
 			phy_type = "utmi";
 			port0;
 		};
 
 /include/ "qoriq-usb2-dr-0.dtsi"
 		usb1: usb@211000 {
+			compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
 			dr_mode = "host";
 			phy_type = "utmi";
 		};

arch/powerpc/boot/dts/fsl/p3041si-post.dtsi

@@ -336,12 +336,14 @@ sdhc@114000 {
 /include/ "qoriq-gpio-0.dtsi"
 /include/ "qoriq-usb2-mph-0.dtsi"
 		usb0: usb@210000 {
+			compatible = "fsl-usb2-mph-v1.6", "fsl-usb2-mph";
 			phy_type = "utmi";
 			port0;
 		};
 
 /include/ "qoriq-usb2-dr-0.dtsi"
 		usb1: usb@211000 {
+			compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
 			dr_mode = "host";
 			phy_type = "utmi";
 		};

arch/powerpc/boot/dts/fsl/p3060si-post.dtsi

@@ -291,6 +291,12 @@ spi@110000 {
 /include/ "qoriq-duart-1.dtsi"
 /include/ "qoriq-gpio-0.dtsi"
 /include/ "qoriq-usb2-mph-0.dtsi"
+	usb@210000 {
+		compatible = "fsl-usb2-mph-v2.2", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
+	};
 /include/ "qoriq-usb2-dr-0.dtsi"
+	usb@211000 {
+		compatible = "fsl-usb2-dr-v2.2", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
+	};
 /include/ "qoriq-sec4.1-0.dtsi"
 };

arch/powerpc/boot/dts/fsl/p5020si-post.dtsi

@@ -339,12 +339,14 @@ sdhc@114000 {
 /include/ "qoriq-gpio-0.dtsi"
 /include/ "qoriq-usb2-mph-0.dtsi"
 		usb0: usb@210000 {
+			compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
 			phy_type = "utmi";
 			port0;
 		};
 
 /include/ "qoriq-usb2-dr-0.dtsi"
 		usb1: usb@211000 {
+			compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
 			dr_mode = "host";
 			phy_type = "utmi";
 		};

arch/powerpc/boot/dts/fsl/pq3-etsec1-0.dtsi

 /*
  * PQ3 eTSEC device tree stub [ @ offsets 0x24000 ]
  *
- * Copyright 2011 Freescale Semiconductor Inc.
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -41,6 +41,7 @@ ethernet@24000 {
 	compatible = "gianfar";
 	reg = <0x24000 0x1000>;
 	ranges = <0x0 0x24000 0x1000>;
+	fsl,magic-packet;
 	local-mac-address = [ 00 00 00 00 00 00 ];
 	interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
 };

arch/powerpc/boot/dts/fsl/pq3-etsec1-1.dtsi

 /*
  * PQ3 eTSEC device tree stub [ @ offsets 0x25000 ]
  *
- * Copyright 2011 Freescale Semiconductor Inc.
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -41,6 +41,7 @@ ethernet@25000 {
 	compatible = "gianfar";
 	reg = <0x25000 0x1000>;
 	ranges = <0x0 0x25000 0x1000>;
+	fsl,magic-packet;
 	local-mac-address = [ 00 00 00 00 00 00 ];
 	interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
 };

arch/powerpc/boot/dts/fsl/pq3-etsec1-2.dtsi

 /*
  * PQ3 eTSEC device tree stub [ @ offsets 0x26000 ]
  *
- * Copyright 2011 Freescale Semiconductor Inc.
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -41,6 +41,7 @@ ethernet@26000 {
 	compatible = "gianfar";
 	reg = <0x26000 0x1000>;
 	ranges = <0x0 0x26000 0x1000>;
+	fsl,magic-packet;
 	local-mac-address = [ 00 00 00 00 00 00 ];
 	interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
 };

arch/powerpc/boot/dts/fsl/pq3-etsec1-3.dtsi

 /*
  * PQ3 eTSEC device tree stub [ @ offsets 0x27000 ]
  *
- * Copyright 2011 Freescale Semiconductor Inc.
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -41,6 +41,7 @@ ethernet@27000 {
 	compatible = "gianfar";
 	reg = <0x27000 0x1000>;
 	ranges = <0x0 0x27000 0x1000>;
+	fsl,magic-packet;
 	local-mac-address = [ 00 00 00 00 00 00 ];
 	interrupts = <37 2 0 0 38 2 0 0 39 2 0 0>;
 };

arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi

@@ -39,6 +39,9 @@ mpic: pic@40000 {
 	reg = <0x40000 0x40000>;
 	compatible = "fsl,mpic";
 	device_type = "open-pic";
+	big-endian;
+	single-cpu-affinity;
+	last-interrupt-source = <255>;
 };
 
 timer@41100 {

arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi

@@ -33,32 +33,32 @@
  */
 
 crypto@30000 {
-	compatible = "fsl,sec4.4", "fsl,sec4.0";
+	compatible = "fsl,sec-v4.4", "fsl,sec-v4.0";
 	#address-cells = <1>;
 	#size-cells = <1>;
 	reg		 = <0x30000 0x10000>;
 	interrupts	 = <58 2 0 0>;
 
 	sec_jr0: jr@1000 {
-		compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring";
+		compatible = "fsl,sec-v4.4-job-ring", "fsl,sec-v4.0-job-ring";
 		reg	   = <0x1000 0x1000>;
 		interrupts	 = <45 2 0 0>;
 	};
 
 	sec_jr1: jr@2000 {
-		compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring";
+		compatible = "fsl,sec-v4.4-job-ring", "fsl,sec-v4.0-job-ring";
 		reg	   = <0x2000 0x1000>;
 		interrupts	 = <45 2 0 0>;
 	};
 
 	sec_jr2: jr@3000 {
-		compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring";
+		compatible = "fsl,sec-v4.4-job-ring", "fsl,sec-v4.0-job-ring";
 		reg	   = <0x3000 0x1000>;
 		interrupts	 = <45 2 0 0>;
 	};
 
 	sec_jr3: jr@4000 {
-		compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring";
+		compatible = "fsl,sec-v4.4-job-ring", "fsl,sec-v4.0-job-ring";
 		reg	   = <0x4000 0x1000>;
 		interrupts	 = <45 2 0 0>;
 	};

arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi

@@ -53,7 +53,7 @@ timer@41100 {
 
 msi0: msi@41600 {
 	compatible = "fsl,mpic-msi";
-	reg = <0x41600 0x200>;
+	reg = <0x41600 0x200 0x44140 4>;
 	msi-available-ranges = <0 0x100>;
 	interrupts = <
 		0xe0 0 0 0
@@ -68,7 +68,7 @@ msi0: msi@41600 {
 
 msi1: msi@41800 {
 	compatible = "fsl,mpic-msi";
-	reg = <0x41800 0x200>;
+	reg = <0x41800 0x200 0x45140 4>;
 	msi-available-ranges = <0 0x100>;
 	interrupts = <
 		0xe8 0 0 0
@@ -83,7 +83,7 @@ msi1: msi@41800 {
 
 msi2: msi@41a00 {
 	compatible = "fsl,mpic-msi";
-	reg = <0x41a00 0x200>;
+	reg = <0x41a00 0x200 0x46140 4>;
 	msi-available-ranges = <0 0x100>;
 	interrupts = <
 		0xf0 0 0 0

arch/powerpc/boot/dts/ge_imp3a.dts

+/*
+ * GE IMP3A Device Tree Source
+ *
+ * Copyright 2010-2011 GE Intelligent Platforms Embedded Systems, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Based on: P2020 DS Device Tree Source
+ * Copyright 2009 Freescale Semiconductor Inc.
+ */
+
+/include/ "fsl/p2020si-pre.dtsi"
+
+/ {
+	model = "GE_IMP3A";
+	compatible = "ge,imp3a";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@fef05000 {
+		reg = <0 0xfef05000 0 0x1000>;
+
+		ranges = <0x0 0x0 0x0 0xff000000 0x01000000
+			  0x1 0x0 0x0 0xe0000000 0x08000000
+			  0x2 0x0 0x0 0xe8000000 0x08000000
+			  0x3 0x0 0x0 0xfc100000 0x00020000
+			  0x4 0x0 0x0 0xfc000000 0x00008000
+			  0x5 0x0 0x0 0xfc008000 0x00008000
+			  0x6 0x0 0x0 0xfee00000 0x00040000
+			  0x7 0x0 0x0 0xfee80000 0x00040000>;
+
+		/* nor@0,0 is a mirror of part of the memory in nor@1,0
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "ge,imp3a-firmware-mirror", "cfi-flash";
+			reg = <0x0 0x0 0x1000000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			partition@0 {
+				label = "firmware";
+				reg = <0x0 0x1000000>;
+				read-only;
+			};
+		};
+		*/
+
+		nor@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "ge,imp3a-paged-flash", "cfi-flash";
+			reg = <0x1 0x0 0x8000000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			partition@0 {
+				label = "user";
+				reg = <0x0 0x7800000>;
+			};
+
+			partition@7800000 {
+				label = "firmware";
+				reg = <0x7800000 0x800000>;
+				read-only;
+			};
+		};
+
+		nvram@3,0 {
+			device_type = "nvram";
+			compatible = "simtek,stk14ca8";
+			reg = <0x3 0x0 0x20000>;
+		};
+
+		fpga@4,0 {
+			compatible = "ge,imp3a-fpga-regs";
+			reg = <0x4 0x0 0x20>;
+		};
+
+		gef_pic: pic@4,20 {
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			device_type = "interrupt-controller";
+			compatible = "ge,imp3a-fpga-pic", "gef,fpga-pic-1.00";
+			reg = <0x4 0x20 0x20>;
+			interrupts = <6 7 0 0>;
+		};
+
+		gef_gpio: gpio@4,400 {
+			#gpio-cells = <2>;
+			compatible = "ge,imp3a-gpio";
+			reg = <0x4 0x400 0x24>;
+			gpio-controller;
+		};
+
+		wdt@4,800 {
+			compatible = "ge,imp3a-fpga-wdt", "gef,fpga-wdt-1.00",
+				"gef,fpga-wdt";
+			reg = <0x4 0x800 0x8>;
+			interrupts = <10 4>;
+			interrupt-parent = <&gef_pic>;
+		};
+
+		/* Second watchdog available, driver currently supports one.
+		wdt@4,808 {
+			compatible = "gef,imp3a-fpga-wdt", "gef,fpga-wdt-1.00",
+				"gef,fpga-wdt";
+			reg = <0x4 0x808 0x8>;
+			interrupts = <9 4>;
+			interrupt-parent = <&gef_pic>;
+		};
+		*/
+
+		nand@6,0 {
+			compatible = "fsl,elbc-fcm-nand";
+			reg = <0x6 0x0 0x40000>;
+		};
+
+		nand@7,0 {
+			compatible = "fsl,elbc-fcm-nand";
+			reg = <0x7 0x0 0x40000>;
+		};
+	};
+
+	soc: soc@fef00000 {
+		ranges = <0x0 0 0xfef00000 0x100000>;
+
+		i2c@3000 {
+			hwmon@48 {
+				compatible = "national,lm92";
+				reg = <0x48>;
+			};
+
+			hwmon@4c {
+				compatible = "adi,adt7461";
+				reg = <0x4c>;
+			};
+
+			rtc@51 {
+				compatible = "epson,rx8581";
+				reg = <0x51>;
+			};
+
+			eti@6b {
+				compatible = "dallas,ds1682";
+				reg = <0x6b>;
+			};
+		};
+
+		usb@22000 {
+			phy_type = "ulpi";
+			dr_mode = "host";
+		};
+
+		mdio@24520 {
+			phy0: ethernet-phy@0 {
+				interrupt-parent = <&gef_pic>;
+				interrupts = <0xc 0x4>;
+				reg = <0x1>;
+			};
+			phy1: ethernet-phy@1 {
+				interrupt-parent = <&gef_pic>;
+				interrupts = <0xb 0x4>;
+				reg = <0x2>;
+			};
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@25520 {
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@26520 {
+			status = "disabled";
+		};
+
+		enet0: ethernet@24000 {
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "gmii";
+		};
+
+		enet1: ethernet@25000 {
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "gmii";
+		};
+
+		enet2: ethernet@26000 {
+			status = "disabled";
+		};
+	};
+
+	pci0: pcie@fef08000 {
+		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xfe020000 0x0 0x10000>;
+		reg = <0 0xfef08000 0 0x1000>;
+
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+		};
+	};
+
+	pci1: pcie@fef09000 {
+		reg = <0 0xfef09000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xfe010000 0x0 0x10000>;
+
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+		};
+
+	};
+
+	pci2: pcie@fef0a000 {
+		reg = <0 0xfef0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xfe000000 0x0 0x10000>;
+
+		pcie@0 {
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+		};
+	};
+};
+
+/include/ "fsl/p2020si-post.dtsi"

arch/powerpc/boot/dts/mpc836x_mds.dts

@@ -405,6 +405,10 @@ phy1: ethernet-phy@01 {
 				reg = <0x1>;
 				device_type = "ethernet-phy";
 			};
+			tbi-phy@2 {
+				device_type = "tbi-phy";
+				reg = <0x2>;
+			};
 		};
 
 		qeic: interrupt-controller@80 {

arch/powerpc/boot/dts/mpc8536ds.dts

 /*
  * MPC8536 DS Device Tree Source
  *
- * Copyright 2008 Freescale Semiconductor, Inc.
+ * Copyright 2008, 2011 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -34,6 +34,10 @@ memory {
 
 	lbc: localbus@ffe05000 {
 		reg = <0 0xffe05000 0 0x1000>;
+
+		ranges = <0x0 0x0 0x0 0xe8000000 0x08000000
+			  0x2 0x0 0x0 0xffa00000 0x00040000
+			  0x3 0x0 0x0 0xffdf0000 0x00008000>;
 	};
 
 	board_soc: soc: soc@ffe00000 {

arch/powerpc/boot/dts/mpc8536ds.dtsi

@@ -32,6 +32,99 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
+&lbc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		partition@0 {
+			reg = <0x0 0x03000000>;
+			label = "ramdisk-nor";
+		};
+
+		partition@3000000 {
+			reg = <0x03000000 0x00e00000>;
+			label = "diagnostic-nor";
+			read-only;
+		};
+
+		partition@3e00000 {
+			reg = <0x03e00000 0x00200000>;
+			label = "dink-nor";
+			read-only;
+		};
+
+		partition@4000000 {
+			reg = <0x04000000 0x00400000>;
+			label = "kernel-nor";
+		};
+
+		partition@4400000 {
+			reg = <0x04400000 0x03b00000>;
+			label = "fs-nor";
+		};
+
+		partition@7f00000 {
+			reg = <0x07f00000 0x00080000>;
+			label = "dtb-nor";
+		};
+
+		partition@7f80000 {
+			reg = <0x07f80000 0x00080000>;
+			label = "u-boot-nor";
+			read-only;
+		};
+	};
+
+	nand@2,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8536-fcm-nand",
+			     "fsl,elbc-fcm-nand";
+		reg = <0x2 0x0 0x40000>;
+
+		partition@0 {
+			reg = <0x0 0x02000000>;
+			label = "u-boot-nand";
+			read-only;
+		};
+
+		partition@2000000 {
+			reg = <0x02000000 0x10000000>;
+			label = "fs-nand";
+		};
+
+		partition@12000000 {
+			reg = <0x12000000 0x08000000>;
+			label = "ramdisk-nand";
+		};
+
+		partition@1a000000 {
+			reg = <0x1a000000 0x04000000>;
+			label = "kernel-nand";
+		};
+
+		partition@1e000000 {
+			reg = <0x1e000000 0x01000000>;
+			label = "dtb-nand";
+		};
+
+		partition@1f000000 {
+			reg = <0x1f000000 0x21000000>;
+			label = "empty-nand";
+		};
+	};
+
+	board-control@3,0 {
+		compatible = "fsl,mpc8536ds-fpga-pixis";
+		reg = <0x3 0x0 0x8000>;
+	};
+};
+
 &board_soc {
 	i2c@3100 {
 		rtc@68 {

arch/powerpc/boot/dts/mpc8536ds_36b.dts

 /*
  * MPC8536DS Device Tree Source (36-bit address map)
  *
- * Copyright 2008-2009 Freescale Semiconductor, Inc.
+ * Copyright 2008-2009, 2011 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -33,7 +33,11 @@ memory {
 	};
 
 	lbc: localbus@ffe05000 {
-		reg = <0 0xffe05000 0 0x1000>;
+		reg = <0xf 0xffe05000 0 0x1000>;
+
+		ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
+			  0x2 0x0 0xf 0xffa00000 0x00040000
+			  0x3 0x0 0xf 0xffdf0000 0x00008000>;
 	};
 
 	board_soc: soc: soc@fffe00000 {

arch/powerpc/boot/dts/mpc8548cds.dts

-/*
- * MPC8548 CDS Device Tree Source
- *
- * Copyright 2006, 2008 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/include/ "fsl/mpc8548si-pre.dtsi"
-
-/ {
-	model = "MPC8548CDS";
-	compatible = "MPC8548CDS", "MPC85xxCDS";
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		ethernet2 = &enet2;
-		ethernet3 = &enet3;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-		pci1 = &pci1;
-		pci2 = &pci2;
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0 0 0x0 0x8000000>;	// 128M at 0x0
-	};
-
-	lbc: localbus@e0005000 {
-		reg = <0 0xe0005000 0 0x1000>;
-	};
-
-	soc: soc8548@e0000000 {
-		ranges = <0 0x0 0xe0000000 0x100000>;
-
-		i2c@3000 {
-			eeprom@50 {
-				compatible = "atmel,24c64";
-				reg = <0x50>;
-			};
-
-			eeprom@56 {
-				compatible = "atmel,24c64";
-				reg = <0x56>;
-			};
-
-			eeprom@57 {
-				compatible = "atmel,24c64";
-				reg = <0x57>;
-			};
-		};
-
-		i2c@3100 {
-			eeprom@50 {
-				compatible = "atmel,24c64";
-				reg = <0x50>;
-			};
-		};
-
-		enet0: ethernet@24000 {
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy0>;
-		};
-
-		mdio@24520 {
-			phy0: ethernet-phy@0 {
-				interrupts = <5 1 0 0>;
-				reg = <0x0>;
-				device_type = "ethernet-phy";
-			};
-			phy1: ethernet-phy@1 {
-				interrupts = <5 1 0 0>;
-				reg = <0x1>;
-				device_type = "ethernet-phy";
-			};
-			phy2: ethernet-phy@2 {
-				interrupts = <5 1 0 0>;
-				reg = <0x2>;
-				device_type = "ethernet-phy";
-			};
-			phy3: ethernet-phy@3 {
-				interrupts = <5 1 0 0>;
-				reg = <0x3>;
-				device_type = "ethernet-phy";
-			};
-			tbi0: tbi-phy@11 {
-				reg = <0x11>;
-				device_type = "tbi-phy";
-			};
-		};
-
-		enet1: ethernet@25000 {
-			tbi-handle = <&tbi1>;
-			phy-handle = <&phy1>;
-		};
-
-		mdio@25520 {
-			tbi1: tbi-phy@11 {
-				reg = <0x11>;
-				device_type = "tbi-phy";
-			};
-		};
-
-		enet2: ethernet@26000 {
-			tbi-handle = <&tbi2>;
-			phy-handle = <&phy2>;
-		};
-
-		mdio@26520 {
-			tbi2: tbi-phy@11 {
-				reg = <0x11>;
-				device_type = "tbi-phy";
-			};
-		};
-
-		enet3: ethernet@27000 {
-			tbi-handle = <&tbi3>;
-			phy-handle = <&phy3>;
-		};
-
-		mdio@27520 {
-			tbi3: tbi-phy@11 {
-				reg = <0x11>;
-				device_type = "tbi-phy";
-			};
-		};
-	};
-
-	pci0: pci@e0008000 {
-		reg = <0 0xe0008000 0 0x1000>;
-		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x10000000
-			  0x1000000 0x0 0x00000000 0 0xe2000000 0x0 0x800000>;
-		clock-frequency = <66666666>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-			/* IDSEL 0x4 (PCIX Slot 2) */
-			0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
-			0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
-			0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
-			0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
-
-			/* IDSEL 0x5 (PCIX Slot 3) */
-			0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
-			0x2800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0
-			0x2800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0
-			0x2800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0
-
-			/* IDSEL 0x6 (PCIX Slot 4) */
-			0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
-			0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
-			0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
-			0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
-
-			/* IDSEL 0x8 (PCIX Slot 5) */
-			0x4000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
-			0x4000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
-			0x4000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
-			0x4000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
-
-			/* IDSEL 0xC (Tsi310 bridge) */
-			0x6000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
-			0x6000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
-			0x6000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
-			0x6000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
-
-			/* IDSEL 0x14 (Slot 2) */
-			0xa000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
-			0xa000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
-			0xa000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
-			0xa000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
-
-			/* IDSEL 0x15 (Slot 3) */
-			0xa800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
-			0xa800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0
-			0xa800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0
-			0xa800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0
-
-			/* IDSEL 0x16 (Slot 4) */
-			0xb000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
-			0xb000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
-			0xb000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
-			0xb000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
-
-			/* IDSEL 0x18 (Slot 5) */
-			0xc000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
-			0xc000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
-			0xc000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
-			0xc000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
-
-			/* IDSEL 0x1C (Tsi310 bridge PCI primary) */
-			0xe000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
-			0xe000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
-			0xe000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
-			0xe000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>;
-
-		pci_bridge@1c {
-			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-			interrupt-map = <
-
-				/* IDSEL 0x00 (PrPMC Site) */
-				0000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
-				0000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
-				0000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
-				0000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
-
-				/* IDSEL 0x04 (VIA chip) */
-				0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
-				0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
-				0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
-				0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
-
-				/* IDSEL 0x05 (8139) */
-				0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
-
-				/* IDSEL 0x06 (Slot 6) */
-				0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
-				0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
-				0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
-				0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
-
-				/* IDESL 0x07 (Slot 7) */
-				0x3800 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
-				0x3800 0x0 0x0 0x2 &mpic 0x0 0x1 0 0
-				0x3800 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
-				0x3800 0x0 0x0 0x4 &mpic 0x2 0x1 0 0>;
-
-			reg = <0xe000 0x0 0x0 0x0 0x0>;
-			#interrupt-cells = <1>;
-			#size-cells = <2>;
-			#address-cells = <3>;
-			ranges = <0x2000000 0x0 0x80000000
-				  0x2000000 0x0 0x80000000
-				  0x0 0x20000000
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x80000>;
-			clock-frequency = <33333333>;
-
-			isa@4 {
-				device_type = "isa";
-				#interrupt-cells = <2>;
-				#size-cells = <1>;
-				#address-cells = <2>;
-				reg = <0x2000 0x0 0x0 0x0 0x0>;
-				ranges = <0x1 0x0 0x1000000 0x0 0x0 0x1000>;
-				interrupt-parent = <&i8259>;
-
-				i8259: interrupt-controller@20 {
-					interrupt-controller;
-					device_type = "interrupt-controller";
-					reg = <0x1 0x20 0x2
-					       0x1 0xa0 0x2
-					       0x1 0x4d0 0x2>;
-					#address-cells = <0>;
-					#interrupt-cells = <2>;
-					compatible = "chrp,iic";
-					interrupts = <0 1 0 0>;
-					interrupt-parent = <&mpic>;
-				};
-
-				rtc@70 {
-					compatible = "pnpPNP,b00";
-					reg = <0x1 0x70 0x2>;
-				};
-			};
-		};
-	};
-
-	pci1: pci@e0009000 {
-		reg = <0 0xe0009000 0 0x1000>;
-		ranges = <0x2000000 0x0 0x90000000 0 0x90000000 0x0 0x10000000
-			  0x1000000 0x0 0x00000000 0 0xe2800000 0x0 0x800000>;
-		clock-frequency = <66666666>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-
-			/* IDSEL 0x15 */
-			0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 0 0
-			0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
-			0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
-			0xa800 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>;
-	};
-
-	pci2: pcie@e000a000 {
-		reg = <0 0xe000a000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xe3000000 0x0 0x100000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xa0000000
-				  0x2000000 0x0 0xa0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-};
-
-/include/ "fsl/mpc8548si-post.dtsi"

arch/powerpc/boot/dts/mpc8548cds.dtsi

+/*
+ * MPC8548CDS Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_lbc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x01000000>;
+		bank-width = <2>;
+		device-width = <2>;
+
+		partition@0 {
+			reg = <0x0 0x0b00000>;
+			label = "ramdisk-nor";
+		};
+
+		partition@300000 {
+			reg = <0x0b00000 0x0400000>;
+			label = "kernel-nor";
+		};
+
+		partition@700000 {
+			reg = <0x0f00000 0x060000>;
+			label = "dtb-nor";
+		};
+
+		partition@760000 {
+			reg = <0x0f60000 0x020000>;
+			label = "env-nor";
+			read-only;
+		};
+
+		partition@780000 {
+			reg = <0x0f80000 0x080000>;
+			label = "u-boot-nor";
+			read-only;
+		};
+	};
+
+	board-control@1,0 {
+		compatible = "fsl,mpc8548cds-fpga";
+		reg = <0x1 0x0 0x1000>;
+	};
+};
+
+&board_soc {
+	i2c@3000 {
+		eeprom@50 {
+			compatible = "atmel,24c64";
+			reg = <0x50>;
+		};
+
+		eeprom@56 {
+			compatible = "atmel,24c64";
+			reg = <0x56>;
+		};
+
+		eeprom@57 {
+			compatible = "atmel,24c64";
+			reg = <0x57>;
+		};
+	};
+
+	i2c@3100 {
+		eeprom@50 {
+			compatible = "atmel,24c64";
+			reg = <0x50>;
+		};
+	};
+
+	enet0: ethernet@24000 {
+		tbi-handle = <&tbi0>;
+		phy-handle = <&phy0>;
+	};
+
+	mdio@24520 {
+		phy0: ethernet-phy@0 {
+			interrupts = <5 1 0 0>;
+			reg = <0x0>;
+			device_type = "ethernet-phy";
+		};
+		phy1: ethernet-phy@1 {
+			interrupts = <5 1 0 0>;
+			reg = <0x1>;
+			device_type = "ethernet-phy";
+		};
+		phy2: ethernet-phy@2 {
+			interrupts = <5 1 0 0>;
+			reg = <0x2>;
+			device_type = "ethernet-phy";
+		};
+		phy3: ethernet-phy@3 {
+			interrupts = <5 1 0 0>;
+			reg = <0x3>;
+			device_type = "ethernet-phy";
+		};
+		tbi0: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet1: ethernet@25000 {
+		tbi-handle = <&tbi1>;
+		phy-handle = <&phy1>;
+	};
+
+	mdio@25520 {
+		tbi1: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet2: ethernet@26000 {
+		tbi-handle = <&tbi2>;
+		phy-handle = <&phy2>;
+	};
+
+	mdio@26520 {
+		tbi2: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet3: ethernet@27000 {
+		tbi-handle = <&tbi3>;
+		phy-handle = <&phy3>;
+	};
+
+	mdio@27520 {
+		tbi3: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+};
+
+&board_pci0 {
+	interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+	interrupt-map = <
+		/* IDSEL 0x4 (PCIX Slot 2) */
+		0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+		0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+		0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+		0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
+
+		/* IDSEL 0x5 (PCIX Slot 3) */
+		0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
+		0x2800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0
+		0x2800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0
+		0x2800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0
+
+		/* IDSEL 0x6 (PCIX Slot 4) */
+		0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+		0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+		0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
+		0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+		/* IDSEL 0x8 (PCIX Slot 5) */
+		0x4000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+		0x4000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+		0x4000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+		0x4000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
+
+		/* IDSEL 0xC (Tsi310 bridge) */
+		0x6000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+		0x6000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+		0x6000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+		0x6000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
+
+		/* IDSEL 0x14 (Slot 2) */
+		0xa000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+		0xa000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+		0xa000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+		0xa000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
+
+		/* IDSEL 0x15 (Slot 3) */
+		0xa800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
+		0xa800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0
+		0xa800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0
+		0xa800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0
+
+		/* IDSEL 0x16 (Slot 4) */
+		0xb000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+		0xb000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+		0xb000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
+		0xb000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+		/* IDSEL 0x18 (Slot 5) */
+		0xc000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+		0xc000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+		0xc000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+		0xc000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
+
+		/* IDSEL 0x1C (Tsi310 bridge PCI primary) */
+		0xe000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+		0xe000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+		0xe000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+		0xe000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>;
+
+	pci_bridge@1c {
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+
+			/* IDSEL 0x00 (PrPMC Site) */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
+
+			/* IDSEL 0x04 (VIA chip) */
+			0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
+			0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+			0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+			0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
+
+			/* IDSEL 0x05 (8139) */
+			0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
+
+			/* IDSEL 0x06 (Slot 6) */
+			0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+			0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+			0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
+			0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+			/* IDESL 0x07 (Slot 7) */
+			0x3800 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+			0x3800 0x0 0x0 0x2 &mpic 0x0 0x1 0 0
+			0x3800 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+			0x3800 0x0 0x0 0x4 &mpic 0x2 0x1 0 0>;
+
+		reg = <0xe000 0x0 0x0 0x0 0x0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		ranges = <0x2000000 0x0 0x80000000
+			  0x2000000 0x0 0x80000000
+			  0x0 0x20000000
+			  0x1000000 0x0 0x0
+			  0x1000000 0x0 0x0
+			  0x0 0x80000>;
+		clock-frequency = <33333333>;
+
+		isa@4 {
+			device_type = "isa";
+			#interrupt-cells = <2>;
+			#size-cells = <1>;
+			#address-cells = <2>;
+			reg = <0x2000 0x0 0x0 0x0 0x0>;
+			ranges = <0x1 0x0 0x1000000 0x0 0x0 0x1000>;
+			interrupt-parent = <&i8259>;
+
+			i8259: interrupt-controller@20 {
+				interrupt-controller;
+				device_type = "interrupt-controller";
+				reg = <0x1 0x20 0x2
+				       0x1 0xa0 0x2
+				       0x1 0x4d0 0x2>;
+				#address-cells = <0>;
+				#interrupt-cells = <2>;
+				compatible = "chrp,iic";
+				interrupts = <0 1 0 0>;
+				interrupt-parent = <&mpic>;
+			};
+
+			rtc@70 {
+				compatible = "pnpPNP,b00";
+				reg = <0x1 0x70 0x2>;
+			};
+		};
+	};
+};

arch/powerpc/boot/dts/mpc8548cds_32b.dts

+/*
+ * MPC8548 CDS Device Tree Source (32-bit address map)
+ *
+ * Copyright 2006, 2008, 2011-2012 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "fsl/mpc8548si-pre.dtsi"
+
+/ {
+	model = "MPC8548CDS";
+	compatible = "MPC8548CDS", "MPC85xxCDS";
+
+	memory {
+		device_type = "memory";
+		reg = <0 0 0x0 0x8000000>;	// 128M at 0x0
+	};
+
+	board_lbc: lbc: localbus@e0005000 {
+		reg = <0 0xe0005000 0 0x1000>;
+
+		ranges = <0x0 0x0 0x0 0xff000000 0x01000000
+			  0x1 0x0 0x0 0xf8004000 0x00001000>;
+
+	};
+
+	board_soc: soc: soc8548@e0000000 {
+		ranges = <0 0x0 0xe0000000 0x100000>;
+	};
+
+	board_pci0: pci0: pci@e0008000 {
+		reg = <0 0xe0008000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x10000000
+			  0x1000000 0x0 0x00000000 0 0xe2000000 0x0 0x800000>;
+		clock-frequency = <66666666>;
+	};
+
+	pci1: pci@e0009000 {
+		reg = <0 0xe0009000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x90000000 0 0x90000000 0x0 0x10000000
+			  0x1000000 0x0 0x00000000 0 0xe2800000 0x0 0x800000>;
+		clock-frequency = <66666666>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+
+			/* IDSEL 0x15 */
+			0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 0 0
+			0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+			0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+			0xa800 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>;
+	};
+
+	pci2: pcie@e000a000 {
+		reg = <0 0xe000a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xe3000000 0x0 0x100000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	rio: rapidio@e00c0000 {
+		reg = <0x0 0xe00c0000 0x0 0x20000>;
+		port1 {
+			ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>;
+		};
+	};
+};
+
+/*
+ * mpc8548cds.dtsi must be last to ensure board_pci0 overrides pci0 settings
+ * for interrupt-map & interrupt-map-mask.
+ */
+
+/include/ "fsl/mpc8548si-post.dtsi"
+/include/ "mpc8548cds.dtsi"

arch/powerpc/boot/dts/mpc8548cds_36b.dts

+/*
+ * MPC8548 CDS Device Tree Source (36-bit address map)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "fsl/mpc8548si-pre.dtsi"
+
+/ {
+	model = "MPC8548CDS";
+	compatible = "MPC8548CDS", "MPC85xxCDS";
+
+	memory {
+		device_type = "memory";
+		reg = <0 0 0x0 0x8000000>;	// 128M at 0x0
+	};
+
+	board_lbc: lbc: localbus@fe0005000 {
+		reg = <0xf 0xe0005000 0 0x1000>;
+
+		ranges = <0x0 0x0 0xf 0xff000000 0x01000000
+			  0x1 0x0 0xf 0xf8004000 0x00001000>;
+
+	};
+
+	board_soc: soc: soc8548@fe0000000 {
+		ranges = <0 0xf 0xe0000000 0x100000>;
+	};
+
+	board_pci0: pci0: pci@fe0008000 {
+		reg = <0xf 0xe0008000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x10000000
+			  0x1000000 0x0 0x00000000 0xf 0xe2000000 0x0 0x800000>;
+		clock-frequency = <66666666>;
+	};
+
+	pci1: pci@fe0009000 {
+		reg = <0xf 0xe0009000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x10000000 0x0 0x10000000
+			  0x1000000 0x0 0x00000000 0xf 0xe2800000 0x0 0x800000>;
+		clock-frequency = <66666666>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+
+			/* IDSEL 0x15 */
+			0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 0 0
+			0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
+			0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
+			0xa800 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>;
+	};
+
+	pci2: pcie@fe000a000 {
+		reg = <0xf 0xe000a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xe3000000 0x0 0x100000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	rio: rapidio@fe00c0000 {
+		reg = <0xf 0xe00c0000 0x0 0x20000>;
+		port1 {
+			ranges = <0x0 0x0 0xc 0x40000000 0x0 0x20000000>;
+		};
+	};
+};
+
+/*
+ * mpc8548cds.dtsi must be last to ensure board_pci0 overrides pci0 settings
+ * for interrupt-map & interrupt-map-mask.
+ */
+
+/include/ "fsl/mpc8548si-post.dtsi"
+/include/ "mpc8548cds.dtsi"

arch/powerpc/boot/dts/mpc8572ds.dtsi

@@ -41,37 +41,47 @@ nor@0,0 {
 		bank-width = <2>;
 		device-width = <1>;
 
-		ramdisk@0 {
+		partition@0 {
 			reg = <0x0 0x03000000>;
-			read-only;
+			label = "ramdisk-nor";
 		};
 
-		diagnostic@3000000 {
+		partition@3000000 {
 			reg = <0x03000000 0x00e00000>;
+			label = "diagnostic-nor";
 			read-only;
 		};
 
-		dink@3e00000 {
+		partition@3e00000 {
 			reg = <0x03e00000 0x00200000>;
+			label = "dink-nor";
 			read-only;
 		};
 
-		kernel@4000000 {
+		partition@4000000 {
 			reg = <0x04000000 0x00400000>;
-			read-only;
+			label = "kernel-nor";
 		};
 
-		jffs2@4400000 {
+		partition@4400000 {
 			reg = <0x04400000 0x03b00000>;
+			label = "fs-nor";
+		};
+
+		partition@7f00000 {
+			reg = <0x07f00000 0x00060000>;
+			label = "dtb-nor";
 		};
 
-		dtb@7f00000 {
-			reg = <0x07f00000 0x00080000>;
+		partition@7f60000 {
+			reg = <0x07f60000 0x00020000>;
+			label = "env-nor";
 			read-only;
 		};
 
-		u-boot@7f80000 {
+		partition@7f80000 {
 			reg = <0x07f80000 0x00080000>;
+			label = "u-boot-nor";
 			read-only;
 		};
 	};
@@ -83,31 +93,35 @@ nand@2,0 {
 			     "fsl,elbc-fcm-nand";
 		reg = <0x2 0x0 0x40000>;
 
-		u-boot@0 {
+		partition@0 {
 			reg = <0x0 0x02000000>;
+			label = "u-boot-nand";
 			read-only;
 		};
 
-		jffs2@2000000 {
+		partition@2000000 {
 			reg = <0x02000000 0x10000000>;
+			label = "fs-nand";
 		};
 
-		ramdisk@12000000 {
+		partition@12000000 {
 			reg = <0x12000000 0x08000000>;
-			read-only;
+			label = "ramdisk-nand";
 		};
 
-		kernel@1a000000 {
+		partition@1a000000 {
 			reg = <0x1a000000 0x04000000>;
+			label = "kernel-nand";
 		};
 
-		dtb@1e000000 {
+		partition@1e000000 {
 			reg = <0x1e000000 0x01000000>;
-			read-only;
+			label = "dtb-nand";
 		};
 
-		empty@1f000000 {
+		partition@1f000000 {
 			reg = <0x1f000000 0x21000000>;
+			label = "empty-nand";
 		};
 	};
 

arch/powerpc/boot/dts/p1010rdb.dtsi

@@ -138,7 +138,7 @@ flash@0 {
 			#size-cells = <1>;
 			compatible = "spansion,s25sl12801";
 			reg = <0>;
-			spi-max-frequency = <50000000>;
+			spi-max-frequency = <40000000>;
 
 			partition@0 {
 				/* 1MB for u-boot Bootloader Image */
@@ -196,7 +196,7 @@ phy2: ethernet-phy@2 {
 		};
 
 		tbi-phy@3 {
-			device-type = "tbi-phy";
+			device_type = "tbi-phy";
 			reg = <0x3>;
 		};
 	};

arch/powerpc/boot/dts/p1020rdb-pc.dtsi

+/*
+ * P1020 RDB-PC Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x1000000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		partition@0 {
+			/* This location must not be altered  */
+			/* 256KB for Vitesse 7385 Switch firmware */
+			reg = <0x0 0x00040000>;
+			label = "NOR Vitesse-7385 Firmware";
+			read-only;
+		};
+
+		partition@40000 {
+			/* 256KB for DTB Image */
+			reg = <0x00040000 0x00040000>;
+			label = "NOR DTB Image";
+		};
+
+		partition@80000 {
+			/* 3.5 MB for Linux Kernel Image */
+			reg = <0x00080000 0x00380000>;
+			label = "NOR Linux Kernel Image";
+		};
+
+		partition@400000 {
+			/* 11MB for JFFS2 based Root file System */
+			reg = <0x00400000 0x00b00000>;
+			label = "NOR JFFS2 Root File System";
+		};
+
+		partition@f00000 {
+			/* This location must not be altered  */
+			/* 512KB for u-boot Bootloader Image */
+			/* 512KB for u-boot Environment Variables */
+			reg = <0x00f00000 0x00100000>;
+			label = "NOR U-Boot Image";
+			read-only;
+		};
+	};
+
+	nand@1,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,p1020-fcm-nand",
+			     "fsl,elbc-fcm-nand";
+		reg = <0x1 0x0 0x40000>;
+
+		partition@0 {
+			/* This location must not be altered  */
+			/* 1MB for u-boot Bootloader Image */
+			reg = <0x0 0x00100000>;
+			label = "NAND U-Boot Image";
+			read-only;
+		};
+
+		partition@100000 {
+			/* 1MB for DTB Image */
+			reg = <0x00100000 0x00100000>;
+			label = "NAND DTB Image";
+		};
+
+		partition@200000 {
+			/* 4MB for Linux Kernel Image */
+			reg = <0x00200000 0x00400000>;
+			label = "NAND Linux Kernel Image";
+		};
+
+		partition@600000 {
+			/* 4MB for Compressed Root file System Image */
+			reg = <0x00600000 0x00400000>;
+			label = "NAND Compressed RFS Image";
+		};
+
+		partition@a00000 {
+			/* 7MB for JFFS2 based Root file System */
+			reg = <0x00a00000 0x00700000>;
+			label = "NAND JFFS2 Root File System";
+		};
+
+		partition@1100000 {
+			/* 15MB for JFFS2 based Root file System */
+			reg = <0x01100000 0x00f00000>;
+			label = "NAND Writable User area";
+		};
+	};
+
+	L2switch@2,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "vitesse-7385";
+		reg = <0x2 0x0 0x20000>;
+	};
+
+	cpld@3,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cpld";
+		reg = <0x3 0x0 0x20000>;
+		read-only;
+	};
+};
+
+&soc {
+	i2c@3000 {
+		rtc@68 {
+			compatible = "pericom,pt7c4338";
+			reg = <0x68>;
+		};
+	};
+
+	spi@7000 {
+		flash@0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "spansion,s25sl12801";
+			reg = <0>;
+			spi-max-frequency = <40000000>; /* input clock */
+
+			partition@u-boot {
+				/* 512KB for u-boot Bootloader Image */
+				reg = <0x0 0x00080000>;
+				label = "u-boot";
+				read-only;
+			};
+
+			partition@dtb {
+				/* 512KB for DTB Image*/
+				reg = <0x00080000 0x00080000>;
+				label = "dtb";
+			};
+
+			partition@kernel {
+				/* 4MB for Linux Kernel Image */
+				reg = <0x00100000 0x00400000>;
+				label = "kernel";
+			};
+
+			partition@fs {
+				/* 4MB for Compressed RFS Image */
+				reg = <0x00500000 0x00400000>;
+				label = "file system";
+			};
+
+			partition@jffs-fs {
+				/* 7MB for JFFS2 based RFS */
+				reg = <0x00900000 0x00700000>;
+				label = "file system jffs2";
+			};
+		};
+	};
+
+	usb@22000 {
+		phy_type = "ulpi";
+	};
+
+	/* USB2 is shared with localbus, so it must be disabled
+	   by default. We can't put 'status = "disabled";' here
+	   since U-Boot doesn't clear the status property when
+	   it enables USB2. OTOH, U-Boot does create a new node
+	   when there isn't any. So, just comment it out.
+	usb@23000 {
+		phy_type = "ulpi";
+	};
+	*/
+
+	mdio@24000 {
+		phy0: ethernet-phy@0 {
+			interrupt-parent = <&mpic>;
+			interrupts = <3 1>;
+			reg = <0x0>;
+		};
+
+		phy1: ethernet-phy@1 {
+			interrupt-parent = <&mpic>;
+			interrupts = <2 1>;
+			reg = <0x1>;
+		};
+
+		tbi0: tbi-phy@11 {
+			device_type = "tbi-phy";
+			reg = <0x11>;
+		};
+	};
+
+	mdio@25000 {
+		tbi1: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet0: ethernet@b0000 {
+		fixed-link = <1 1 1000 0 0>;
+		phy-connection-type = "rgmii-id";
+
+	};
+
+	enet1: ethernet@b1000 {
+		phy-handle = <&phy0>;
+		tbi-handle = <&tbi1>;
+		phy-connection-type = "sgmii";
+	};
+
+	enet2: ethernet@b2000 {
+		phy-handle = <&phy1>;
+		phy-connection-type = "rgmii-id";
+	};
+};

arch/powerpc/boot/dts/p1020rdb-pc_32b.dts

+/*
+ * P1020 RDB-PC Device Tree Source (32-bit address map)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1020si-pre.dtsi"
+/ {
+	model = "fsl,P1020RDB-PC";
+	compatible = "fsl,P1020RDB-PC";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@ffe05000 {
+		reg = <0 0xffe05000 0 0x1000>;
+
+		/* NOR, NAND Flashes and Vitesse 5 port L2 switch */
+		ranges = <0x0 0x0 0x0 0xef000000 0x01000000
+			  0x1 0x0 0x0 0xff800000 0x00040000
+			  0x2 0x0 0x0 0xffb00000 0x00020000
+			  0x3 0x0 0x0 0xffa00000 0x00020000>;
+	};
+
+	soc: soc@ffe00000 {
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@ffe09000 {
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		reg = <0 0xffe09000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		reg = <0 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "p1020rdb-pc.dtsi"
+/include/ "fsl/p1020si-post.dtsi"

arch/powerpc/boot/dts/p1020rdb-pc_36b.dts

+/*
+ * P1020 RDB-PC Device Tree Source (36-bit address map)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1020si-pre.dtsi"
+/ {
+	model = "fsl,P1020RDB-PC";
+	compatible = "fsl,P1020RDB-PC";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@fffe05000 {
+		reg = <0xf 0xffe05000 0 0x1000>;
+
+		/* NOR, NAND Flashes and Vitesse 5 port L2 switch */
+		ranges = <0x0 0x0 0xf 0xef000000 0x01000000
+			  0x1 0x0 0xf 0xff800000 0x00040000
+			  0x2 0x0 0xf 0xffb00000 0x00040000
+			  0x3 0x0 0xf 0xffa00000 0x00020000>;
+	};
+
+	soc: soc@fffe00000 {
+		ranges = <0x0 0xf 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@fffe09000 {
+		reg = <0xf 0xffe09000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@fffe0a000 {
+		reg = <0xf 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "p1020rdb-pc.dtsi"
+/include/ "fsl/p1020si-post.dtsi"

arch/powerpc/boot/dts/p1020rdb-pc_camp_core0.dts

+/*
+ * P1020 RDB-PC  Core0 Device Tree Source in CAMP mode.
+ *
+ * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
+ * can be shared, all the other devices must be assigned to one core only.
+ * This dts file allows core0 to have memory, l2, i2c, spi, gpio, tdm, dma, usb,
+ * eth1, eth2, sdhc, crypto, global-util, message, pci0, pci1, msi.
+ *
+ * Please note to add "-b 0" for core0's dts compiling.
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "p1020rdb-pc_32b.dts"
+
+/ {
+	model = "fsl,P1020RDB-PC";
+	compatible = "fsl,P1020RDB-PC";
+
+	aliases {
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		serial0 = &serial0;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		PowerPC,P1020@1 {
+			status = "disabled";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	localbus@ffe05000 {
+		status = "disabled";
+	};
+
+	soc@ffe00000 {
+		serial1: serial@4600 {
+			status = "disabled";
+		};
+
+		enet0: ethernet@b0000 {
+			status = "disabled";
+		};
+
+		mpic: pic@40000 {
+			protected-sources = <
+			42 29 30 34	/* serial1, enet0-queue-group0 */
+			17 18 24 45	/* enet0-queue-group1, crypto */
+			>;
+			pic-no-reset;
+		};
+	};
+};

arch/powerpc/boot/dts/p1020rdb-pc_camp_core1.dts

+/*
+ * P1020 RDB-PC Core1 Device Tree Source in CAMP mode.
+ *
+ * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
+ * can be shared, all the other devices must be assigned to one core only.
+ * This dts allows core1 to have l2, eth0, crypto.
+ *
+ * Please note to add "-b 1" for core1's dts compiling.
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "p1020rdb-pc_32b.dts"
+
+/ {
+	model = "fsl,P1020RDB-PC";
+	compatible = "fsl,P1020RDB-PC";
+
+	aliases {
+		ethernet0 = &enet0;
+		serial0 = &serial1;
+		};
+
+	cpus {
+		PowerPC,P1020@0 {
+			status = "disabled";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	localbus@ffe05000 {
+		status = "disabled";
+	};
+
+	soc@ffe00000 {
+		ecm-law@0 {
+			status = "disabled";
+		};
+
+		ecm@1000 {
+			status = "disabled";
+		};
+
+		memory-controller@2000 {
+			status = "disabled";
+		};
+
+		i2c@3000 {
+			status = "disabled";
+		};
+
+		i2c@3100 {
+			status = "disabled";
+		};
+
+		serial0: serial@4500 {
+			status = "disabled";
+		};
+
+		spi@7000 {
+			status = "disabled";
+		};
+
+		gpio: gpio-controller@f000 {
+			status = "disabled";
+		};
+
+		dma@21300 {
+			status = "disabled";
+		};
+
+		mdio@24000 {
+			status = "disabled";
+		};
+
+		mdio@25000 {
+			status = "disabled";
+		};
+
+		enet1: ethernet@b1000 {
+			status = "disabled";
+		};
+
+		enet2: ethernet@b2000 {
+			status = "disabled";
+		};
+
+		usb@22000 {
+			status = "disabled";
+		};
+
+		sdhci@2e000 {
+			status = "disabled";
+		};
+
+		mpic: pic@40000 {
+			protected-sources = <
+			16 		/* ecm, mem, L2, pci0, pci1 */
+			43 42 59	/* i2c, serial0, spi */
+			47 63 62 	/* gpio, tdm */
+			20 21 22 23	/* dma */
+			03 02 		/* mdio */
+			35 36 40	/* enet1-queue-group0 */
+			51 52 67	/* enet1-queue-group1 */
+			31 32 33	/* enet2-queue-group0 */
+			25 26 27	/* enet2-queue-group1 */
+			28 72 58 	/* usb, sdhci, crypto */
+			0xb0 0xb1 0xb2	/* message */
+			0xb3 0xb4 0xb5
+			0xb6 0xb7
+			0xe0 0xe1 0xe2	/* msi */
+			0xe3 0xe4 0xe5
+			0xe6 0xe7		/* sdhci, crypto , pci */
+			>;
+			pic-no-reset;
+		};
+
+		msi@41600 {
+			status = "disabled";
+		};
+
+		global-utilities@e0000 {	//global utilities block
+			status = "disabled";
+		};
+	};
+
+	pci0: pcie@ffe09000 {
+		status = "disabled";
+	};
+
+	pci1: pcie@ffe0a000 {
+		status = "disabled";
+	};
+};

arch/powerpc/boot/dts/p1021rdb.dts

+/*
+ * P1021 RDB Device Tree Source
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1021si-pre.dtsi"
+/ {
+	model = "fsl,P1021RDB";
+	compatible = "fsl,P1021RDB-PC";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@ffe05000 {
+		reg = <0 0xffe05000 0 0x1000>;
+
+		/* NOR, NAND Flashes and Vitesse 5 port L2 switch */
+		ranges = <0x0 0x0 0x0 0xef000000 0x01000000
+			  0x1 0x0 0x0 0xff800000 0x00040000
+			  0x2 0x0 0x0 0xffb00000 0x00020000>;
+	};
+
+	soc: soc@ffe00000 {
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@ffe09000 {
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		reg = <0 0xffe09000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		reg = <0 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	qe: qe@ffe80000 {
+                ranges = <0x0 0x0 0xffe80000 0x40000>;
+                reg = <0 0xffe80000 0 0x480>;
+                brg-frequency = <0>;
+                bus-frequency = <0>;
+        };
+};
+
+/include/ "p1021rdb.dtsi"
+/include/ "fsl/p1021si-post.dtsi"

arch/powerpc/boot/dts/p1021rdb.dtsi

+/*
+ * P1021 RDB Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x1000000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		partition@0 {
+			/* This location must not be altered  */
+			/* 256KB for Vitesse 7385 Switch firmware */
+			reg = <0x0 0x00040000>;
+			label = "NOR Vitesse-7385 Firmware";
+			read-only;
+		};
+
+		partition@40000 {
+			/* 256KB for DTB Image */
+			reg = <0x00040000 0x00040000>;
+			label = "NOR DTB Image";
+		};
+
+		partition@80000 {
+			/* 3.5 MB for Linux Kernel Image */
+			reg = <0x00080000 0x00380000>;
+			label = "NOR Linux Kernel Image";
+		};
+
+		partition@400000 {
+			/* 11MB for JFFS2 based Root file System */
+			reg = <0x00400000 0x00b00000>;
+			label = "NOR JFFS2 Root File System";
+		};
+
+		partition@f00000 {
+			/* This location must not be altered  */
+			/* 512KB for u-boot Bootloader Image */
+			/* 512KB for u-boot Environment Variables */
+			reg = <0x00f00000 0x00100000>;
+			label = "NOR U-Boot Image";
+		};
+	};
+
+	nand@1,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,p1021-fcm-nand",
+			     "fsl,elbc-fcm-nand";
+		reg = <0x1 0x0 0x40000>;
+
+		partition@0 {
+			/* This location must not be altered  */
+			/* 1MB for u-boot Bootloader Image */
+			reg = <0x0 0x00100000>;
+			label = "NAND U-Boot Image";
+			read-only;
+		};
+
+		partition@100000 {
+			/* 1MB for DTB Image */
+			reg = <0x00100000 0x00100000>;
+			label = "NAND DTB Image";
+		};
+
+		partition@200000 {
+			/* 4MB for Linux Kernel Image */
+			reg = <0x00200000 0x00400000>;
+			label = "NAND Linux Kernel Image";
+		};
+
+		partition@600000 {
+			/* 4MB for Compressed Root file System Image */
+			reg = <0x00600000 0x00400000>;
+			label = "NAND Compressed RFS Image";
+		};
+
+		partition@a00000 {
+			/* 7MB for JFFS2 based Root file System */
+			reg = <0x00a00000 0x00700000>;
+			label = "NAND JFFS2 Root File System";
+		};
+
+		partition@1100000 {
+			/* 15MB for User Writable Area  */
+			reg = <0x01100000 0x00f00000>;
+			label = "NAND Writable User area";
+		};
+	};
+
+	L2switch@2,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "vitesse-7385";
+		reg = <0x2 0x0 0x20000>;
+	};
+};
+
+&soc {
+	i2c@3000 {
+		rtc@68 {
+			compatible = "pericom,pt7c4338";
+			reg = <0x68>;
+		};
+	};
+
+	spi@7000 {
+		flash@0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "spansion,s25sl12801";
+			reg = <0>;
+			spi-max-frequency = <40000000>; /* input clock */
+
+			partition@u-boot {
+				/* 512KB for u-boot Bootloader Image */
+				reg = <0x0 0x00080000>;
+				label = "SPI Flash U-Boot Image";
+				read-only;
+			};
+
+			partition@dtb {
+				/* 512KB for DTB Image */
+				reg = <0x00080000 0x00080000>;
+				label = "SPI Flash DTB Image";
+			};
+
+			partition@kernel {
+				/* 4MB for Linux Kernel Image */
+				reg = <0x00100000 0x00400000>;
+				label = "SPI Flash Linux Kernel Image";
+			};
+
+			partition@fs {
+				/* 4MB for Compressed RFS Image */
+				reg = <0x00500000 0x00400000>;
+				label = "SPI Flash Compressed RFSImage";
+			};
+
+			partition@jffs-fs {
+				/* 7MB for JFFS2 based RFS */
+				reg = <0x00900000 0x00700000>;
+				label = "SPI Flash JFFS2 RFS";
+			};
+		};
+	};
+
+	usb@22000 {
+		phy_type = "ulpi";
+	};
+
+	mdio@24000 {
+		phy0: ethernet-phy@0 {
+			interrupt-parent = <&mpic>;
+			interrupts = <3 1 0 0>;
+			reg = <0x0>;
+		};
+
+		phy1: ethernet-phy@1 {
+			interrupt-parent = <&mpic>;
+			interrupts = <2 1 0 0>;
+			reg = <0x1>;
+		};
+
+		tbi0: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	mdio@25000 {
+		tbi1: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	mdio@26000 {
+		tbi2: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet0: ethernet@b0000 {
+		fixed-link = <1 1 1000 0 0>;
+		phy-connection-type = "rgmii-id";
+
+	};
+
+	enet1: ethernet@b1000 {
+		phy-handle = <&phy0>;
+		tbi-handle = <&tbi1>;
+		phy-connection-type = "sgmii";
+	};
+
+	enet2: ethernet@b2000 {
+		phy-handle = <&phy1>;
+		tbi-handle = <&tbi2>;
+		phy-connection-type = "rgmii-id";
+	};
+};

arch/powerpc/boot/dts/p1021rdb_36b.dts

+/*
+ * P1021 RDB Device Tree Source (36-bit address map)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1021si-pre.dtsi"
+/ {
+	model = "fsl,P1021RDB";
+	compatible = "fsl,P1021RDB-PC";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@fffe05000 {
+		reg = <0xf 0xffe05000 0 0x1000>;
+
+		/* NOR, NAND Flashes and Vitesse 5 port L2 switch */
+		ranges = <0x0 0x0 0xf 0xef000000 0x01000000
+			  0x1 0x0 0xf 0xff800000 0x00040000
+			  0x2 0x0 0xf 0xffb00000 0x00020000>;
+	};
+
+	soc: soc@fffe00000 {
+		ranges = <0x0 0xf 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@fffe09000 {
+		ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+		reg = <0xf 0xffe09000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@fffe0a000 {
+		reg = <0xf 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	qe: qe@fffe80000 {
+                ranges = <0x0 0xf 0xffe80000 0x40000>;
+                reg = <0xf 0xffe80000 0 0x480>;
+                brg-frequency = <0>;
+                bus-frequency = <0>;
+        };
+};
+
+/include/ "p1021rdb.dtsi"
+/include/ "fsl/p1021si-post.dtsi"

arch/powerpc/boot/dts/p1022ds.dts

-/*
- * P1022 DS 36Bit Physical Address Map Device Tree Source
- *
- * Copyright 2010 Freescale Semiconductor, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-/include/ "fsl/p1022si-pre.dtsi"
-/ {
-	model = "fsl,P1022DS";
-	compatible = "fsl,P1022DS";
-
-	memory {
-		device_type = "memory";
-	};
-
-	lbc: localbus@fffe05000 {
-		reg = <0xf 0xffe05000 0 0x1000>;
-		ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
-			  0x1 0x0 0xf 0xe0000000 0x08000000
-			  0x2 0x0 0xf 0xff800000 0x00040000
-			  0x3 0x0 0xf 0xffdf0000 0x00008000>;
-
-		/*
-		 * This node is used to access the pixis via "indirect" mode,
-		 * which is done by writing the pixis register index to chip
-		 * select 0 and the value to/from chip select 1.  Indirect
-		 * mode is the only way to access the pixis when DIU video
-		 * is enabled.  Note that this assumes that the first column
-		 * of the 'ranges' property above is the chip select number.
-		 */
-		board-control@0,0 {
-			compatible = "fsl,p1022ds-indirect-pixis";
-			reg = <0x0 0x0 1	/* CS0 */
-			       0x1 0x0 1>;	/* CS1 */
-		};
-
-		nor@0,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "cfi-flash";
-			reg = <0x0 0x0 0x8000000>;
-			bank-width = <2>;
-			device-width = <1>;
-
-			partition@0 {
-				reg = <0x0 0x03000000>;
-				label = "ramdisk-nor";
-				read-only;
-			};
-
-			partition@3000000 {
-				reg = <0x03000000 0x00e00000>;
-				label = "diagnostic-nor";
-				read-only;
-			};
-
-			partition@3e00000 {
-				reg = <0x03e00000 0x00200000>;
-				label = "dink-nor";
-				read-only;
-			};
-
-			partition@4000000 {
-				reg = <0x04000000 0x00400000>;
-				label = "kernel-nor";
-				read-only;
-			};
-
-			partition@4400000 {
-				reg = <0x04400000 0x03b00000>;
-				label = "jffs2-nor";
-			};
-
-			partition@7f00000 {
-				reg = <0x07f00000 0x00080000>;
-				label = "dtb-nor";
-				read-only;
-			};
-
-			partition@7f80000 {
-				reg = <0x07f80000 0x00080000>;
-				label = "u-boot-nor";
-				read-only;
-			};
-		};
-
-		nand@2,0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,elbc-fcm-nand";
-			reg = <0x2 0x0 0x40000>;
-
-			partition@0 {
-				reg = <0x0 0x02000000>;
-				label = "u-boot-nand";
-				read-only;
-			};
-
-			partition@2000000 {
-				reg = <0x02000000 0x10000000>;
-				label = "jffs2-nand";
-			};
-
-			partition@12000000 {
-				reg = <0x12000000 0x10000000>;
-				label = "ramdisk-nand";
-				read-only;
-			};
-
-			partition@22000000 {
-				reg = <0x22000000 0x04000000>;
-				label = "kernel-nand";
-			};
-
-			partition@26000000 {
-				reg = <0x26000000 0x01000000>;
-				label = "dtb-nand";
-				read-only;
-			};
-
-			partition@27000000 {
-				reg = <0x27000000 0x19000000>;
-				label = "reserved-nand";
-			};
-		};
-
-		board-control@3,0 {
-			compatible = "fsl,p1022ds-fpga", "fsl,fpga-ngpixis";
-			reg = <3 0 0x30>;
-			interrupt-parent = <&mpic>;
-			/*
-			 * IRQ8 is generated if the "EVENT" switch is pressed
-			 * and PX_CTL[EVESEL] is set to 00.
-			 */
-			interrupts = <8 8 0 0>;
-		};
-	};
-
-	soc: soc@fffe00000 {
-		ranges = <0x0 0xf 0xffe00000 0x100000>;
-
-		i2c@3100 {
-			wm8776:codec@1a {
-				compatible = "wlf,wm8776";
-				reg = <0x1a>;
-				/*
-				 * clock-frequency will be set by U-Boot if
-				 * the clock is enabled.
-				 */
-			};
-		};
-
-		spi@7000 {
-			flash@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "spansion,s25sl12801";
-				reg = <0>;
-				spi-max-frequency = <40000000>; /* input clock */
-
-				partition@0 {
-					label = "u-boot-spi";
-					reg = <0x00000000 0x00100000>;
-					read-only;
-				};
-				partition@100000 {
-					label = "kernel-spi";
-					reg = <0x00100000 0x00500000>;
-					read-only;
-				};
-				partition@600000 {
-					label = "dtb-spi";
-					reg = <0x00600000 0x00100000>;
-					read-only;
-				};
-				partition@700000 {
-					label = "file system-spi";
-					reg = <0x00700000 0x00900000>;
-				};
-			};
-		};
-
-		ssi@15000 {
-			fsl,mode = "i2s-slave";
-			codec-handle = <&wm8776>;
-			fsl,ssi-asynchronous;
-		};
-
-		usb@22000 {
-			phy_type = "ulpi";
-		};
-
-		usb@23000 {
-			status = "disabled";
-		};
-
-		mdio@24000 {
-			phy0: ethernet-phy@0 {
-				interrupts = <3 1 0 0>;
-				reg = <0x1>;
-			};
-			phy1: ethernet-phy@1 {
-				interrupts = <9 1 0 0>;
-				reg = <0x2>;
-			};
-			tbi-phy@2 {
-				device_type = "tbi-phy";
-				reg = <0x2>;
-			};
-		};
-
-		ethernet@b0000 {
-			phy-handle = <&phy0>;
-			phy-connection-type = "rgmii-id";
-		};
-
-		ethernet@b1000 {
-			phy-handle = <&phy1>;
-			phy-connection-type = "rgmii-id";
-		};
-	};
-
-	pci0: pcie@fffe09000 {
-		reg = <0xf 0xffe09000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xe0000000
-				  0x2000000 0x0 0xe0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	pci1: pcie@fffe0a000 {
-		reg = <0xf 0xffe0a000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x10000>;
-		pcie@0 {
-			reg = <0x0 0x0 0x0 0x0 0x0>;
-			ranges = <0x2000000 0x0 0xe0000000
-				  0x2000000 0x0 0xe0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	pci2: pcie@fffe0b000 {
-		reg = <0xf 0xffe0b000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xe0000000
-				  0x2000000 0x0 0xe0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-};
-
-/include/ "fsl/p1022si-post.dtsi"

arch/powerpc/boot/dts/p1022ds.dtsi

+/*
+ * P1022 DS Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_lbc {
+	/*
+	 * This node is used to access the pixis via "indirect" mode,
+	 * which is done by writing the pixis register index to chip
+	 * select 0 and the value to/from chip select 1.  Indirect
+	 * mode is the only way to access the pixis when DIU video
+	 * is enabled.  Note that this assumes that the first column
+	 * of the 'ranges' property above is the chip select number.
+	 */
+	board-control@0,0 {
+		compatible = "fsl,p1022ds-indirect-pixis";
+		reg = <0x0 0x0 1	/* CS0 */
+		       0x1 0x0 1>;	/* CS1 */
+		interrupt-parent = <&mpic>;
+		interrupts = <8 0 0 0>;
+	};
+
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		partition@0 {
+			reg = <0x0 0x03000000>;
+			label = "ramdisk-nor";
+			read-only;
+		};
+
+		partition@3000000 {
+			reg = <0x03000000 0x00e00000>;
+			label = "diagnostic-nor";
+			read-only;
+		};
+
+		partition@3e00000 {
+			reg = <0x03e00000 0x00200000>;
+			label = "dink-nor";
+			read-only;
+		};
+
+		partition@4000000 {
+			reg = <0x04000000 0x00400000>;
+			label = "kernel-nor";
+			read-only;
+		};
+
+		partition@4400000 {
+			reg = <0x04400000 0x03b00000>;
+			label = "jffs2-nor";
+		};
+
+		partition@7f00000 {
+			reg = <0x07f00000 0x00080000>;
+			label = "dtb-nor";
+			read-only;
+		};
+
+		partition@7f80000 {
+			reg = <0x07f80000 0x00080000>;
+			label = "u-boot-nor";
+			read-only;
+		};
+	};
+
+	nand@2,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,elbc-fcm-nand";
+		reg = <0x2 0x0 0x40000>;
+
+		partition@0 {
+			reg = <0x0 0x02000000>;
+			label = "u-boot-nand";
+			read-only;
+		};
+
+		partition@2000000 {
+			reg = <0x02000000 0x10000000>;
+			label = "jffs2-nand";
+		};
+
+		partition@12000000 {
+			reg = <0x12000000 0x10000000>;
+			label = "ramdisk-nand";
+			read-only;
+		};
+
+		partition@22000000 {
+			reg = <0x22000000 0x04000000>;
+			label = "kernel-nand";
+		};
+
+		partition@26000000 {
+			reg = <0x26000000 0x01000000>;
+			label = "dtb-nand";
+			read-only;
+		};
+
+		partition@27000000 {
+			reg = <0x27000000 0x19000000>;
+			label = "reserved-nand";
+		};
+	};
+
+	board-control@3,0 {
+		compatible = "fsl,p1022ds-fpga", "fsl,fpga-ngpixis";
+		reg = <3 0 0x30>;
+		interrupt-parent = <&mpic>;
+		/*
+		 * IRQ8 is generated if the "EVENT" switch is pressed
+		 * and PX_CTL[EVESEL] is set to 00.
+		 */
+		interrupts = <8 0 0 0>;
+	};
+};
+
+&board_soc {
+	i2c@3100 {
+		wm8776:codec@1a {
+			compatible = "wlf,wm8776";
+			reg = <0x1a>;
+			/*
+			 * clock-frequency will be set by U-Boot if
+			 * the clock is enabled.
+			 */
+		};
+	};
+
+	spi@7000 {
+		flash@0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "spansion,s25sl12801";
+			reg = <0>;
+			spi-max-frequency = <40000000>; /* input clock */
+
+			partition@0 {
+				label = "u-boot-spi";
+				reg = <0x00000000 0x00100000>;
+				read-only;
+			};
+			partition@100000 {
+				label = "kernel-spi";
+				reg = <0x00100000 0x00500000>;
+				read-only;
+			};
+			partition@600000 {
+				label = "dtb-spi";
+				reg = <0x00600000 0x00100000>;
+				read-only;
+			};
+			partition@700000 {
+				label = "file system-spi";
+				reg = <0x00700000 0x00900000>;
+			};
+		};
+	};
+
+	ssi@15000 {
+		fsl,mode = "i2s-slave";
+		codec-handle = <&wm8776>;
+		fsl,ssi-asynchronous;
+	};
+
+	usb@22000 {
+		phy_type = "ulpi";
+	};
+
+	usb@23000 {
+		status = "disabled";
+	};
+
+	mdio@24000 {
+		phy0: ethernet-phy@0 {
+			interrupts = <3 1 0 0>;
+			reg = <0x1>;
+		};
+		phy1: ethernet-phy@1 {
+			interrupts = <9 1 0 0>;
+			reg = <0x2>;
+		};
+		tbi-phy@2 {
+			device_type = "tbi-phy";
+			reg = <0x2>;
+		};
+	};
+
+	ethernet@b0000 {
+		phy-handle = <&phy0>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	ethernet@b1000 {
+		phy-handle = <&phy1>;
+		phy-connection-type = "rgmii-id";
+	};
+};

arch/powerpc/boot/dts/p1022ds_32b.dts

+/*
+ * P1022 DS 32-bit Physical Address Map Device Tree Source
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1022si-pre.dtsi"
+/ {
+	model = "fsl,P1022DS";
+	compatible = "fsl,P1022DS";
+
+	memory {
+		device_type = "memory";
+	};
+
+	board_lbc: lbc: localbus@ffe05000 {
+		ranges = <0x0 0x0 0x0 0xe8000000 0x08000000
+			  0x1 0x0 0x0 0xe0000000 0x08000000
+			  0x2 0x0 0x0 0xff800000 0x00040000
+			  0x3 0x0 0x0 0xffdf0000 0x00008000>;
+		reg = <0x0 0xffe05000 0 0x1000>;
+	};
+
+	board_soc: soc: soc@ffe00000 {
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@ffe09000 {
+		ranges = <0x2000000 0x0 0xe0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		reg = <0x0 0xffe09000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		ranges = <0x2000000 0x0 0xe0000000 0 0xc0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
+		reg = <0 0xffe0a000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci2: pcie@ffe0b000 {
+		ranges = <0x2000000 0x0 0xe0000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+		reg = <0 0xffe0b000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "fsl/p1022si-post.dtsi"
+/include/ "p1022ds.dtsi"

arch/powerpc/boot/dts/p1022ds_36b.dts

+/*
+ * P1022 DS 36-bit Physical Address Map Device Tree Source
+ *
+ * Copyright 2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1022si-pre.dtsi"
+/ {
+	model = "fsl,P1022DS";
+	compatible = "fsl,P1022DS";
+
+	memory {
+		device_type = "memory";
+	};
+
+	board_lbc: lbc: localbus@fffe05000 {
+		ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
+			  0x1 0x0 0xf 0xe0000000 0x08000000
+			  0x2 0x0 0xf 0xff800000 0x00040000
+			  0x3 0x0 0xf 0xffdf0000 0x00008000>;
+		reg = <0xf 0xffe05000 0 0x1000>;
+	};
+
+	board_soc: soc: soc@fffe00000 {
+		ranges = <0x0 0xf 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@fffe09000 {
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+		reg = <0xf 0xffe09000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@fffe0a000 {
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x10000>;
+		reg = <0xf 0xffe0a000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci2: pcie@fffe0b000 {
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
+		reg = <0xf 0xffe0b000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "fsl/p1022si-post.dtsi"
+/include/ "p1022ds.dtsi"

arch/powerpc/boot/dts/p1025rdb.dtsi

+/*
+ * P1025 RDB Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x1000000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		partition@0 {
+			/* This location must not be altered  */
+			/* 256KB for Vitesse 7385 Switch firmware */
+			reg = <0x0 0x00040000>;
+			label = "NOR Vitesse-7385 Firmware";
+			read-only;
+		};
+
+		partition@40000 {
+			/* 256KB for DTB Image */
+			reg = <0x00040000 0x00040000>;
+			label = "NOR DTB Image";
+		};
+
+		partition@80000 {
+			/* 3.5 MB for Linux Kernel Image */
+			reg = <0x00080000 0x00380000>;
+			label = "NOR Linux Kernel Image";
+		};
+
+		partition@400000 {
+			/* 11MB for JFFS2 based Root file System */
+			reg = <0x00400000 0x00b00000>;
+			label = "NOR JFFS2 Root File System";
+		};
+
+		partition@f00000 {
+			/* This location must not be altered  */
+			/* 512KB for u-boot Bootloader Image */
+			/* 512KB for u-boot Environment Variables */
+			reg = <0x00f00000 0x00100000>;
+			label = "NOR U-Boot Image";
+			read-only;
+		};
+	};
+
+	nand@1,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,p1025-fcm-nand",
+			     "fsl,elbc-fcm-nand";
+		reg = <0x1 0x0 0x40000>;
+
+		partition@0 {
+			/* This location must not be altered  */
+			/* 1MB for u-boot Bootloader Image */
+			reg = <0x0 0x00100000>;
+			label = "NAND U-Boot Image";
+			read-only;
+		};
+
+		partition@100000 {
+			/* 1MB for DTB Image */
+			reg = <0x00100000 0x00100000>;
+			label = "NAND DTB Image";
+		};
+
+		partition@200000 {
+			/* 4MB for Linux Kernel Image */
+			reg = <0x00200000 0x00400000>;
+			label = "NAND Linux Kernel Image";
+		};
+
+		partition@600000 {
+			/* 4MB for Compressed Root file System Image */
+			reg = <0x00600000 0x00400000>;
+			label = "NAND Compressed RFS Image";
+		};
+
+		partition@a00000 {
+			/* 7MB for JFFS2 based Root file System */
+			reg = <0x00a00000 0x00700000>;
+			label = "NAND JFFS2 Root File System";
+		};
+
+		partition@1100000 {
+			/* 15MB for JFFS2 based Root file System */
+			reg = <0x01100000 0x00f00000>;
+			label = "NAND Writable User area";
+		};
+	};
+
+};
+
+&soc {
+	i2c@3000 {
+		rtc@68 {
+			compatible = "dallas,ds1339";
+			reg = <0x68>;
+		};
+	};
+
+	spi@7000 {
+		flash@0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "spansion,s25sl12801";
+			reg = <0>;
+			spi-max-frequency = <40000000>; /* input clock */
+
+			partition@u-boot {
+				/* 512KB for u-boot Bootloader Image */
+				reg = <0x0 0x00080000>;
+				label = "u-boot";
+				read-only;
+			};
+
+			partition@dtb {
+				/* 512KB for DTB Image */
+				reg = <0x00080000 0x00080000>;
+				label = "dtb";
+			};
+
+			partition@kernel {
+				/* 4MB for Linux Kernel Image */
+				reg = <0x00100000 0x00400000>;
+				label = "kernel";
+			};
+
+			partition@fs {
+				/* 4MB for Compressed RFS Image */
+				reg = <0x00500000 0x00400000>;
+				label = "file system";
+			};
+
+			partition@jffs-fs {
+				/* 7MB for JFFS2 based RFS */
+				reg = <0x00900000 0x00700000>;
+				label = "file system jffs2";
+			};
+		};
+	};
+
+	usb@22000 {
+		phy_type = "ulpi";
+	};
+
+	/* USB2 is shared with localbus, so it must be disabled
+	   by default. We can't put 'status = "disabled";' here
+	   since U-Boot doesn't clear the status property when
+	   it enables USB2. OTOH, U-Boot does create a new node
+	   when there isn't any. So, just comment it out.
+	usb@23000 {
+		phy_type = "ulpi";
+	};
+	*/
+
+	mdio@24000 {
+		phy0: ethernet-phy@0 {
+			interrupt-parent = <&mpic>;
+			interrupts = <3 1>;
+			reg = <0x0>;
+		};
+
+		phy1: ethernet-phy@1 {
+			interrupt-parent = <&mpic>;
+			interrupts = <2 1>;
+			reg = <0x1>;
+		};
+
+		tbi0: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	mdio@25000 {
+		tbi1: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	mdio@26000 {
+		tbi2: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet0: ethernet@b0000 {
+		fixed-link = <1 1 1000 0 0>;
+		phy-connection-type = "rgmii-id";
+
+	};
+
+	enet1: ethernet@b1000 {
+		phy-handle = <&phy0>;
+		tbi-handle = <&tbi1>;
+		phy-connection-type = "sgmii";
+	};
+
+	enet2: ethernet@b2000 {
+		phy-handle = <&phy1>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	par_io@e0100 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0xe0100 0x60>;
+		ranges = <0x0 0xe0100 0x60>;
+		device_type = "par_io";
+		num-ports = <3>;
+		pio1: ucc_pin@01 {
+			pio-map = <
+		/* port  pin  dir  open_drain  assignment  has_irq */
+				0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
+				0x1  0x14 0x3  0x0  0x1  0x0    /* QE_MUX_MDIO */
+				0x0  0x17 0x2  0x0  0x2  0x0    /* CLK12 */
+				0x0  0x18 0x2  0x0  0x1  0x0    /* CLK9 */
+				0x0  0x7  0x1  0x0  0x2  0x0    /* ENET1_TXD0_SER1_TXD0 */
+				0x0  0x9  0x1  0x0  0x2  0x0    /* ENET1_TXD1_SER1_TXD1 */
+				0x0  0xb  0x1  0x0  0x2  0x0    /* ENET1_TXD2_SER1_TXD2 */
+				0x0  0xc  0x1  0x0  0x2  0x0    /* ENET1_TXD3_SER1_TXD3 */
+				0x0  0x6  0x2  0x0  0x2  0x0    /* ENET1_RXD0_SER1_RXD0 */
+				0x0  0xa  0x2  0x0  0x2  0x0    /* ENET1_RXD1_SER1_RXD1 */
+				0x0  0xe  0x2  0x0  0x2  0x0    /* ENET1_RXD2_SER1_RXD2 */
+				0x0  0xf  0x2  0x0  0x2  0x0    /* ENET1_RXD3_SER1_RXD3 */
+				0x0  0x5  0x1  0x0  0x2  0x0    /* ENET1_TX_EN_SER1_RTS_B */
+				0x0  0xd  0x1  0x0  0x2  0x0    /* ENET1_TX_ER */
+				0x0  0x4  0x2  0x0  0x2  0x0    /* ENET1_RX_DV_SER1_CTS_B */
+				0x0  0x8  0x2  0x0  0x2  0x0    /* ENET1_RX_ER_SER1_CD_B */
+				0x0  0x11 0x2  0x0  0x2  0x0    /* ENET1_CRS */
+				0x0  0x10 0x2  0x0  0x2  0x0>;    /* ENET1_COL */
+		};
+
+		pio2: ucc_pin@02 {
+			pio-map = <
+		/* port  pin  dir  open_drain  assignment  has_irq */
+				0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
+				0x1  0x14 0x3  0x0  0x1  0x0    /* QE_MUX_MDIO */
+				0x1  0xb  0x2  0x0  0x1  0x0    /* CLK13 */
+				0x1  0x7  0x1  0x0  0x2  0x0    /* ENET5_TXD0_SER5_TXD0 */
+				0x1  0xa  0x1  0x0  0x2  0x0    /* ENET5_TXD1_SER5_TXD1 */
+				0x1  0x6  0x2  0x0  0x2  0x0    /* ENET5_RXD0_SER5_RXD0 */
+				0x1  0x9  0x2  0x0  0x2  0x0    /* ENET5_RXD1_SER5_RXD1 */
+				0x1  0x5  0x1  0x0  0x2  0x0    /* ENET5_TX_EN_SER5_RTS_B */
+				0x1  0x4  0x2  0x0  0x2  0x0    /* ENET5_RX_DV_SER5_CTS_B */
+				0x1  0x8  0x2  0x0  0x2  0x0>;    /* ENET5_RX_ER_SER5_CD_B */
+		};
+	};
+};

arch/powerpc/boot/dts/p1025rdb_32b.dts

+/*
+ * P1025 RDB Device Tree Source (32-bit address map)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1021si-pre.dtsi"
+/ {
+	model = "fsl,P1025RDB";
+	compatible = "fsl,P1025RDB";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@ffe05000 {
+		reg = <0 0xffe05000 0 0x1000>;
+
+		/* NOR, NAND Flashes */
+		ranges = <0x0 0x0 0x0 0xef000000 0x01000000
+			  0x1 0x0 0x0 0xff800000 0x00040000>;
+	};
+
+	soc: soc@ffe00000 {
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@ffe09000 {
+		ranges = <0x2000000 0x0 0xe0000000 0 0xe0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		reg = <0 0xffe09000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		reg = <0 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0 0xe0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	qe: qe@ffe80000 {
+		ranges = <0x0 0x0 0xffe80000 0x40000>;
+		reg = <0 0xffe80000 0 0x480>;
+		brg-frequency = <0>;
+		bus-frequency = <0>;
+		status = "disabled"; /* no firmware loaded */
+
+		enet3: ucc@2000 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			rx-clock-name = "clk12";
+			tx-clock-name = "clk9";
+			pio-handle = <&pio1>;
+			phy-handle = <&qe_phy0>;
+			phy-connection-type = "mii";
+		};
+
+		mdio@2120 {
+			qe_phy0: ethernet-phy@0 {
+				interrupt-parent = <&mpic>;
+				interrupts = <4 1 0 0>;
+				reg = <0x6>;
+				device_type = "ethernet-phy";
+			};
+			qe_phy1: ethernet-phy@03 {
+				interrupt-parent = <&mpic>;
+				interrupts = <5 1 0 0>;
+				reg = <0x3>;
+				device_type = "ethernet-phy";
+			};
+			tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet4: ucc@2400 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			rx-clock-name = "none";
+			tx-clock-name = "clk13";
+			pio-handle = <&pio2>;
+			phy-handle = <&qe_phy1>;
+			phy-connection-type = "rmii";
+		};
+	};
+};
+
+/include/ "p1025rdb.dtsi"
+/include/ "fsl/p1021si-post.dtsi"

arch/powerpc/boot/dts/p1025rdb_36b.dts

+/*
+ * P1025 RDB Device Tree Source (36-bit address map)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1021si-pre.dtsi"
+/ {
+	model = "fsl,P1025RDB";
+	compatible = "fsl,P1025RDB";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@fffe05000 {
+		reg = <0xf 0xffe05000 0 0x1000>;
+
+		/* NOR, NAND Flashes */
+		ranges = <0x0 0x0 0xf 0xef000000 0x01000000
+			  0x1 0x0 0xf 0xff800000 0x00040000>;
+	};
+
+	soc: soc@fffe00000 {
+		ranges = <0x0 0xf 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@fffe09000 {
+		reg = <0xf 0xffe09000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0xe 0x20000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@fffe0a000 {
+		reg = <0xf 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "p1025rdb.dtsi"
+/include/ "fsl/p1021si-post.dtsi"

arch/powerpc/boot/dts/p2020rdb-pc_32b.dts

+/*
+ * P2020 RDB-PC 32Bit Physical Address Map Device Tree Source
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p2020si-pre.dtsi"
+
+/ {
+	model = "fsl,P2020RDB";
+	compatible = "fsl,P2020RDB-PC";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@ffe05000 {
+		reg = <0 0xffe05000 0 0x1000>;
+
+		/* NOR and NAND Flashes */
+		ranges = <0x0 0x0 0x0 0xef000000 0x01000000
+			  0x1 0x0 0x0 0xff800000 0x00040000
+			  0x2 0x0 0x0 0xffb00000 0x00020000
+			  0x3 0x0 0x0 0xffa00000 0x00020000>;
+	};
+
+	soc: soc@ffe00000 {
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@ffe08000 {
+		reg = <0 0xffe08000 0 0x1000>;
+		status = "disabled";
+	};
+
+	pci1: pcie@ffe09000 {
+		reg = <0 0xffe09000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci2: pcie@ffe0a000 {
+		reg = <0 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0xe0000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xe0000000
+				  0x2000000 0x0 0xe0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+};
+
+/include/ "p2020rdb-pc.dtsi"
+/include/ "fsl/p2020si-post.dtsi"

arch/powerpc/boot/dts/p2020rdb.dts

@@ -34,7 +34,7 @@ lbc: localbus@ffe05000 {
 
 		/* NOR and NAND Flashes */
 		ranges = <0x0 0x0 0x0 0xef000000 0x01000000
-			  0x1 0x0 0x0 0xffa00000 0x00040000
+			  0x1 0x0 0x0 0xff800000 0x00040000
 			  0x2 0x0 0x0 0xffb00000 0x00020000>;
 
 		nor@0,0 {
@@ -157,7 +157,7 @@ flash@0 {
 				#size-cells = <1>;
 				compatible = "spansion,s25sl12801";
 				reg = <0>;
-				spi-max-frequency = <50000000>;
+				spi-max-frequency = <40000000>;
 
 				partition@0 {
 					/* 512KB for u-boot Bootloader Image */

arch/powerpc/boot/wrapper

@@ -144,6 +144,7 @@ tmp=$tmpdir/zImage.$$.o
 ksection=.kernel:vmlinux.strip
 isection=.kernel:initrd
 link_address='0x400000'
+make_space=y
 
 case "$platform" in
 pseries)
@@ -210,6 +211,7 @@ ps3)
     ksection=.kernel:vmlinux.bin
     isection=.kernel:initrd
     link_address=''
+    make_space=n
     pie=
     ;;
 ep88xc|ep405|ep8248e)
@@ -278,17 +280,19 @@ else
     rm -f $vmz.$$
 fi
 
-# Round the size to next higher MB limit
-round_size=$(((strip_size + 0xfffff) & 0xfff00000))
+if [ "$make_space" = "y" ]; then
+	# Round the size to next higher MB limit
+	round_size=$(((strip_size + 0xfffff) & 0xfff00000))
 
-round_size=0x$(printf "%x" $round_size)
-link_addr=$(printf "%d" $link_address)
+	round_size=0x$(printf "%x" $round_size)
+	link_addr=$(printf "%d" $link_address)
 
-if [ $link_addr -lt $strip_size ]; then
+	if [ $link_addr -lt $strip_size ]; then
 	    echo "INFO: Uncompressed kernel (size 0x$(printf "%x\n" $strip_size))" \
 			"overlaps the address of the wrapper($link_address)"
 	    echo "INFO: Fixing the link_address of wrapper to ($round_size)"
 	    link_address=$round_size
+	fi
 fi
 
 vmz="$vmz$gzip"

arch/powerpc/configs/86xx/gef_ppc9a_defconfig

@@ -131,6 +131,7 @@ CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_MPC=y
 CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_GE_FPGA=y
 CONFIG_SENSORS_LM90=y
 CONFIG_SENSORS_LM92=y
 CONFIG_WATCHDOG=y

arch/powerpc/configs/mpc85xx_defconfig

 CONFIG_PPC_85xx=y
+CONFIG_PHYS_64BIT=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y