Commit 537c1ab3 authored by Matthew Wilcox's avatar Matthew Wilcox Committed by David S. Miller

[PATCH] PA-RISC arch update for 2.6.2

 - a500 & c3000 defconfigs (Grant Grundler)
 - Copyright and FSF address updates (Joel Soete, Grant Grundler)
 - Changes to fix dev->bridge conversion (James Bottomley)
 - Fix SuckyIO console (Grant Grundler)
 - Stop pasting __FILE__
 - More compat work (Carlos O'Donell)
 - Redo vmlinux.lds.S for x86-similarity (James Bottomley)
 - Move __ex_table into the writable section (Randolph Chung)
parent 5558ae34
#
# Automatically generated make config: don't edit
#
CONFIG_PARISC=y
CONFIG_MMU=y
CONFIG_STACK_GROWSUP=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
# CONFIG_CLEAN_COMPILE is not set
# CONFIG_STANDALONE is not set
CONFIG_BROKEN=y
CONFIG_BROKEN_ON_SMP=y
#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_EMBEDDED=y
# CONFIG_KALLSYMS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
CONFIG_KMOD=y
#
# Processor type and features
#
# CONFIG_PA7000 is not set
# CONFIG_PA7100LC is not set
# CONFIG_PA7200 is not set
CONFIG_PA8X00=y
CONFIG_PA20=y
CONFIG_PARISC64=y
CONFIG_64BIT=y
# CONFIG_PDC_NARROW is not set
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
CONFIG_COMPAT=y
#
# Bus options (PCI, PCMCIA, EISA, GSC, ISA)
#
# CONFIG_GSC is not set
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
CONFIG_PCI_LBA=y
CONFIG_IOSAPIC=y
CONFIG_IOMMU_SBA=y
# CONFIG_SUPERIO is not set
CONFIG_CHASSIS_LCD_LED=y
# CONFIG_PDC_CHASSIS is not set
CONFIG_HOTPLUG=y
#
# PCMCIA/CardBus support
#
CONFIG_PCMCIA=m
CONFIG_YENTA=m
CONFIG_CARDBUS=y
# CONFIG_I82092 is not set
# CONFIG_TCIC is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
# CONFIG_FW_LOADER is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
CONFIG_BLK_DEV_UMEM=m
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=6144
CONFIG_BLK_DEV_INITRD=y
#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_REPORT_LUNS=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_IOMAPPED=y
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
CONFIG_SCSI_QLOGIC_FC=m
# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set
CONFIG_SCSI_QLOGIC_1280=m
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
CONFIG_SCSI_DEBUG=m
#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_QLOGIC is not set
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
# CONFIG_MD_RAID5 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_BLK_DEV_DM is not set
#
# Fusion MPT device support
#
CONFIG_FUSION=m
CONFIG_FUSION_MAX_SGE=40
CONFIG_FUSION_ISENSE=m
CONFIG_FUSION_CTL=m
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_NETLINK_DEV=y
CONFIG_UNIX=y
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
# CONFIG_INET_IPCOMP is not set
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
# CONFIG_IP_NF_NAT_LOCAL is not set
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
CONFIG_LLC=m
CONFIG_LLC2=m
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_ETHERTAP is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=y
# CONFIG_TULIP_MWI is not set
CONFIG_TULIP_MMIO=y
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
CONFIG_PCMCIA_XIRCOM=m
CONFIG_PCMCIA_XIRTULIP=m
CONFIG_HP100=m
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_DGRS is not set
CONFIG_EEPRO100=m
# CONFIG_EEPRO100_PIO is not set
CONFIG_E100=m
# CONFIG_FEALNX is not set
CONFIG_NATSEMI=m
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
CONFIG_EPIC100=m
# CONFIG_SUNDANCE is not set
CONFIG_VIA_RHINE=m
CONFIG_VIA_RHINE_MMIO=y
#
# Ethernet (1000 Mbit)
#
CONFIG_ACENIC=m
CONFIG_ACENIC_OMIT_TIGON_I=y
CONFIG_DL2K=m
CONFIG_E1000=m
CONFIG_E1000_NAPI=y
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SK98LIN is not set
CONFIG_TIGON3=m
#
# Ethernet (10000 Mbit)
#
CONFIG_IXGB=m
CONFIG_IXGB_NAPI=y
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
# CONFIG_PPPOE is not set
# CONFIG_SLIP is not set
#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set
CONFIG_PCMCIA_WAVELAN=m
CONFIG_PCMCIA_NETWAVE=m
#
# Wireless 802.11 Frequency Hopping cards support
#
# CONFIG_PCMCIA_RAYCS is not set
#
# Wireless 802.11b ISA/PCI cards support
#
# CONFIG_AIRO is not set
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_PCI_HERMES=m
#
# Wireless 802.11b Pcmcia/Cardbus cards support
#
CONFIG_PCMCIA_HERMES=m
CONFIG_AIRO_CS=m
# CONFIG_PCMCIA_ATMEL is not set
# CONFIG_PCMCIA_WL3501 is not set
CONFIG_NET_WIRELESS=y
#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# PCMCIA network device support
#
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
# CONFIG_PCMCIA_FMVJ18X is not set
# CONFIG_PCMCIA_PCNET is not set
# CONFIG_PCMCIA_NMCLAN is not set
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
# CONFIG_PCMCIA_AXNET is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# Bluetooth support
#
# CONFIG_BT is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
# CONFIG_SERIO is not set
#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=8
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MUX is not set
CONFIG_PDC_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
#
# I2C support
#
# CONFIG_I2C is not set
#
# I2C Algorithms
#
#
# I2C Hardware Bus support
#
#
# I2C Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set
#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_QIC02_TAPE is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
CONFIG_GEN_RTC_X=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
# CONFIG_FB is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
# CONFIG_MDA_CONSOLE is not set
# CONFIG_STI_CONSOLE is not set
CONFIG_DUMMY_CONSOLE_COLUMNS=160
CONFIG_DUMMY_CONSOLE_ROWS=64
CONFIG_DUMMY_CONSOLE=y
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
# CONFIG_USB is not set
# CONFIG_USB_GADGET is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
CONFIG_JFS_FS=m
# CONFIG_JFS_POSIX_ACL is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_XFS_FS=m
# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
# CONFIG_DEVPTS_FS_XATTR is not set
# CONFIG_TMPFS is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_SUNRPC=m
# CONFIG_SUNRPC_GSS is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
CONFIG_CIFS=m
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
CONFIG_NLS_CODEPAGE_863=m
# CONFIG_NLS_CODEPAGE_864 is not set
CONFIG_NLS_CODEPAGE_865=m
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
#
# Profiling support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SLAB is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_FRAME_POINTER is not set
# CONFIG_DEBUG_INFO is not set
#
# Security options
#
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_TEST=m
#
# Library routines
#
CONFIG_CRC32=y
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
#
# Automatically generated make config: don't edit
#
CONFIG_PARISC=y
CONFIG_MMU=y
CONFIG_STACK_GROWSUP=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
# CONFIG_CLEAN_COMPILE is not set
# CONFIG_STANDALONE is not set
CONFIG_BROKEN=y
CONFIG_BROKEN_ON_SMP=y
#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
CONFIG_KMOD=y
#
# Processor type and features
#
# CONFIG_PA7000 is not set
# CONFIG_PA7100LC is not set
# CONFIG_PA7200 is not set
CONFIG_PA8X00=y
CONFIG_PA20=y
# CONFIG_PARISC64 is not set
# CONFIG_64BIT is not set
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
# CONFIG_HPUX is not set
#
# Bus options (PCI, PCMCIA, EISA, GSC, ISA)
#
# CONFIG_GSC is not set
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
CONFIG_PCI_LBA=y
CONFIG_IOSAPIC=y
CONFIG_IOMMU_SBA=y
CONFIG_SUPERIO=y
# CONFIG_CHASSIS_LCD_LED is not set
# CONFIG_PDC_CHASSIS is not set
CONFIG_HOTPLUG=y
#
# PCMCIA/CardBus support
#
CONFIG_PCMCIA=m
CONFIG_YENTA=m
CONFIG_CARDBUS=y
# CONFIG_I82092 is not set
# CONFIG_TCIC is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_FW_LOADER=y
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
CONFIG_BLK_DEV_UMEM=m
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
CONFIG_BLK_DEV_IDEDISK=m
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_IDEDISK_STROKE=y
# CONFIG_BLK_DEV_IDECS is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=y
# CONFIG_IDE_TASK_IOCTL is not set
# CONFIG_IDE_TASKFILE_IO is not set
#
# IDE chipset support/bugfixes
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
# CONFIG_IDEDMA_PCI_AUTO is not set
# CONFIG_IDEDMA_PCI_WIP is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
CONFIG_BLK_DEV_NS87415=y
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
CONFIG_BLK_DEV_SIIMAGE=m
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_DMA_NONPCI is not set
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_REPORT_LUNS=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_MEGARAID is not set
CONFIG_SCSI_SATA=y
# CONFIG_SCSI_SATA_SVW is not set
CONFIG_SCSI_ATA_PIIX=m
CONFIG_SCSI_SATA_PROMISE=m
CONFIG_SCSI_SATA_SIL=m
CONFIG_SCSI_SATA_VIA=m
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
# CONFIG_SCSI_PCI2000 is not set
# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
CONFIG_SCSI_QLOGIC_FC=m
# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA2XXX_CONFIG=y
CONFIG_SCSI_QLA2XXX=m
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
CONFIG_SCSI_QLA23XX=m
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
CONFIG_SCSI_DEBUG=m
#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_AHA152X is not set
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not set
CONFIG_PCMCIA_QLOGIC=m
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
# CONFIG_MD_RAID5 is not set
# CONFIG_MD_RAID6 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_BLK_DEV_DM is not set
#
# Fusion MPT device support
#
CONFIG_FUSION=m
CONFIG_FUSION_MAX_SGE=40
CONFIG_FUSION_ISENSE=m
CONFIG_FUSION_CTL=m
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_NETLINK_DEV=y
CONFIG_UNIX=y
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
# CONFIG_INET_IPCOMP is not set
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
# CONFIG_IP_NF_NAT_LOCAL is not set
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_IP_NF_COMPAT_IPCHAINS=m
CONFIG_IP_NF_COMPAT_IPFWADM=m
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
CONFIG_LLC=m
CONFIG_LLC2=m
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_ETHERTAP is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_HAPPYMEAL=m
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=y
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
# CONFIG_DM9102 is not set
CONFIG_PCMCIA_XIRCOM=m
CONFIG_PCMCIA_XIRTULIP=m
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
# CONFIG_AMD8111_ETH is not set
CONFIG_ADAPTEC_STARFIRE=m
# CONFIG_ADAPTEC_STARFIRE_NAPI is not set
CONFIG_B44=m
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
CONFIG_EEPRO100=m
# CONFIG_EEPRO100_PIO is not set
CONFIG_E100=m
# CONFIG_FEALNX is not set
CONFIG_NATSEMI=m
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
#
# Ethernet (1000 Mbit)
#
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
# CONFIG_DL2K is not set
CONFIG_E1000=m
# CONFIG_E1000_NAPI is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SK98LIN is not set
CONFIG_TIGON3=m
#
# Ethernet (10000 Mbit)
#
CONFIG_IXGB=y
CONFIG_IXGB_NAPI=y
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPPOE=m
# CONFIG_SLIP is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# PCMCIA network device support
#
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# Bluetooth support
#
# CONFIG_BT is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1600
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=m
CONFIG_SERIO_SERPORT=m
# CONFIG_SERIO_PCIPS2 is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_HIL_OLD is not set
# CONFIG_KEYBOARD_HIL is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_HIL is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MUX is not set
# CONFIG_PDC_CONSOLE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_QIC02_TAPE is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
CONFIG_GEN_RTC_X=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
#
# I2C support
#
# CONFIG_I2C is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
CONFIG_FB=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_STI=y
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
# CONFIG_MDA_CONSOLE is not set
CONFIG_STI_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=160
CONFIG_DUMMY_CONSOLE_ROWS=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_PCI_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_LOGO_PARISC_CLUT224=y
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
# CONFIG_SND is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB=y
CONFIG_USB_DEBUG=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_UHCI_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
# CONFIG_USB_STORAGE_ISD200 is not set
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_HP8200e=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
CONFIG_USB_AIPTEK=m
CONFIG_USB_WACOM=m
CONFIG_USB_KBTAB=m
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_XPAD is not set
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_SCANNER=m
CONFIG_USB_MICROTEK=m
CONFIG_USB_HPUSBSCSI=m
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
#
# USB port drivers
#
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
CONFIG_USB_LEGOTOWER=m
# CONFIG_USB_BRLVGER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_GADGET is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=m
# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V4 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_GSS is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Profiling support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SLAB is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_FRAME_POINTER is not set
# CONFIG_DEBUG_INFO is not set
#
# Security options
#
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
# CONFIG_CRYPTO_SHA512 is not set
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_TEST=m
#
# Library routines
#
CONFIG_CRC32=y
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
/*
* linux/arch/parisc/kernel/sys_hpux.c
* Implements HPUX syscalls.
*
* implements HPUX syscalls.
* Copyright (C) 1999 Matthew Wilcox <willy with parisc-linux.org>
* Copyright (C) 2000 Michael Ang <mang with subcarrier.org>
* Copyright (C) 2000 John Marvin <jsm with parisc-linux.org>
* Copyright (C) 2000 Philipp Rumpf
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/mm.h>
......
/*
* linux/arch/parisc/hpux/ioctl.c
* Implements some necessary HPUX ioctls.
*
* implements some necessary HPUX ioctls.
* Copyright (C) 1999-2002 Matthew Wilcox <willy with parisc-linux.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
......
/*
* linux/arch/parisc/kernel/sys_hpux.c
* Implements HPUX syscalls.
*
* implements HPUX syscalls.
* Copyright (C) 1999 Matthew Wilcox <willy with parisc-linux.org>
* Copyright (C) 2000 Philipp Rumpf
* Copyright (C) 2000 John Marvin <jsm with parisc-linux.org>
* Copyright (C) 2000 Michael Ang <mang with subcarrier.org>
* Copyright (C) 2001 Nathan Neulinger <nneul at umr.edu>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/fs.h>
......
......@@ -2,6 +2,29 @@
* Generate definitions needed by assembly language modules.
* This code generates raw asm output which is post-processed to extract
* and format the required data.
*
* Copyright (C) 2000-2001 John Marvin <jsm at parisc-linux.org>
* Copyright (C) 2000 David Huggins-Daines <dhd with pobox.org>
* Copyright (C) 2000 Sam Creasey <sammy@sammy.net>
* Copyright (C) 2000 Grant Grundler <grundler with parisc-linux.org>
* Copyright (C) 2001 Paul Bame <bame at parisc-linux.org>
* Copyright (C) 2001 Richard Hirst <rhirst at parisc-linux.org>
* Copyright (C) 2002 Randolph Chung <tausq with parisc-linux.org>
* Copyright (C) 2003 James Bottomley <jejb at parisc-linux.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/types.h>
......
......@@ -286,7 +286,7 @@ void get_pci_node_path(struct pci_dev *dev, struct hardware_path *path)
path->bc[i--] = PCI_SLOT(devfn) | (PCI_FUNC(devfn) << 5);
}
padev = HBA_DATA(bus->dev->platform_data)->dev;
padev = HBA_DATA(bus->bridge->platform_data)->dev;
while (padev != &root) {
path->bc[i--] = padev->hw_path;
padev = padev->parent;
......
/* arch/parisc/kernel/pdc.c - safe pdc access routines
/*
* arch/parisc/kernel/firmware.c - safe PDC access routines
*
* PDC == Processor Dependent Code
*
* See http://www.parisc-linux.org/documentation/index.html
* for documentation describing the entry points and calling
* conventions defined below.
*
* Copyright 1999 SuSE GmbH Nuernberg (Philipp Rumpf, prumpf@tux.org)
* portions Copyright 1999 The Puffin Group, (Alex deVries, David Kennedy)
* Copyright 1999 The Puffin Group, (Alex deVries, David Kennedy)
* Copyright 2003 Grant Grundler <grundler parisc-linux org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* only these routines should be used out of the real kernel (i.e. everything
* using virtual addresses) for obvious reasons */
*/
/* I think it would be in everyone's best interest to follow this
* guidelines when writing PDC wrappers:
......@@ -643,6 +655,49 @@ int pdc_pci_irt(unsigned long num_entries, unsigned long hpa, void *tbl)
}
#if 0 /* UNTEST CODE - left here in case someone needs it */
/**
* pdc_pci_config_read - read PCI config space.
* @hpa token from PDC to indicate which PCI device
* @pci_addr configuration space address to read from
*
* Read PCI Configuration space *before* linux PCI subsystem is running.
*/
unsigned int pdc_pci_config_read(void *hpa, unsigned long cfg_addr)
{
int retval;
spin_lock_irq(&pdc_lock);
pdc_result[0] = 0;
pdc_result[1] = 0;
retval = mem_pdc_call(PDC_PCI_INDEX, PDC_PCI_READ_CONFIG,
__pa(pdc_result), hpa, cfg_addr&~3UL, 4UL);
spin_unlock_irq(&pdc_lock);
return retval ? ~0 : (unsigned int) pdc_result[0];
}
/**
* pdc_pci_config_write - read PCI config space.
* @hpa token from PDC to indicate which PCI device
* @pci_addr configuration space address to write
* @val value we want in the 32-bit register
*
* Write PCI Configuration space *before* linux PCI subsystem is running.
*/
void pdc_pci_config_write(void *hpa, unsigned long cfg_addr, unsigned int val)
{
int retval;
spin_lock_irq(&pdc_lock);
pdc_result[0] = 0;
retval = mem_pdc_call(PDC_PCI_INDEX, PDC_PCI_WRITE_CONFIG,
__pa(pdc_result), hpa,
cfg_addr&~3UL, 4UL, (unsigned long) val);
spin_unlock_irq(&pdc_lock);
return retval;
}
#endif /* UNTESTED CODE */
/**
* pdc_tod_read - Read the Time-Of-Day clock.
* @tod: The return buffer:
......
......@@ -22,17 +22,6 @@
.level 1.1
.section .initcall.init
.align 4
.export __initcall_start
__initcall_start:
.export __initcall_end
__initcall_end:
.export __setup_start
__setup_start:
.export __setup_end
__setup_end:
.data
.export boot_args
......@@ -64,13 +53,13 @@ stext:
/* Clear BSS (shouldn't the boot loader do this?) */
.import _edata,data
.import _end,data
.import __bss_start,data
.import __bss_stop,data
ldil L%PA(_edata),%r3
ldo R%PA(_edata)(%r3),%r3
ldil L%PA(_end),%r4
ldo R%PA(_end)(%r4),%r4
ldil L%PA(__bss_start),%r3
ldo R%PA(__bss_start)(%r3),%r3
ldil L%PA(__bss_stop),%r4
ldo R%PA(__bss_stop)(%r4),%r4
$bss_loop:
cmpb,<<,n %r3,%r4,$bss_loop
stw,ma %r0,4(%r3)
......
......@@ -26,17 +26,6 @@
.level 2.0w
.section .initcall.init
.align 4
.export __initcall_start
__initcall_start:
.export __initcall_end
__initcall_end:
.export __setup_start
__setup_start:
.export __setup_end
__setup_end:
.data
.export boot_args
......@@ -64,13 +53,13 @@ stext:
/* Clear BSS (shouldn't the boot loader do this?) */
.import _edata,data
.import _end,data
.import __bss_start,data
.import __bss_stop,data
ldil L%PA(_edata),%r3
ldo R%PA(_edata)(%r3),%r3
ldil L%PA(_end),%r4
ldo R%PA(_end)(%r4),%r4
ldil L%PA(__bss_start),%r3
ldo R%PA(__bss_start)(%r3),%r3
ldil L%PA(__bss_stop),%r4
ldo R%PA(__bss_stop)(%r4),%r4
$bss_loop:
cmpb,<<,n %r3,%r4,$bss_loop
stb,ma %r0,1(%r3)
......
......@@ -17,7 +17,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
......
/*
* Static declaration of "init" task data structure.
*
* Copyright (C) 2000 Paul Bame <bame at parisc-linux.org>
* Copyright (C) 2000-2001 John Marvin <jsm at parisc-linux.org>
* Copyright (C) 2001 Helge Deller <deller @ parisc-linux.org>
* Copyright (C) 2002 Matthew Wilcox <willy with parisc-linux.org>
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/sched.h>
......
......@@ -526,20 +526,6 @@ static void __init system_map_inventory(void)
int i;
long status = PDC_OK;
#if defined(CONFIG_IOMMU_SBA) && defined(CONFIG_SUPERIO)
/*
* Stop the suckyio usb controller on Astro based systems.
* Otherwise the machine might crash during iommu setup.
*/
pdc_io_reset();
/*
* Unfortunately if we reset devices here, serial console
* stops working :-(
*/
/* pdc_io_reset_devices(); */
#endif
for (i = 0; status != PDC_BAD_PROC && status != PDC_NE_MOD; i++) {
struct parisc_device *dev;
struct pdc_system_map_mod_info module_result;
......
/*
* Parisc tlb and cache flushing support
* Copyright (C) 2000 Hewlett-Packard (John Marvin)
* PARISC TLB and cache flushing support
* Copyright (C) 2000-2001 Hewlett-Packard (John Marvin)
* Copyright (C) 2001 Matthew Wilcox (willy at parisc-linux.org)
* Copyright (C) 2002 Richard Hirst (rhirst with parisc-linux.org)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
......@@ -14,7 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
......
/*
* Architecture-specific kernel symbols
* Architecture-specific kernel symbols
*
* Copyright (C) 2000-2001 Richard Hirst <rhirst with parisc-linux.org>
* Copyright (C) 2001 Dave Kennedy
* Copyright (C) 2001 Paul Bame <bame at parisc-linux.org>
* Copyright (C) 2001-2003 Grant Grundler <grundler with parisc-linux.org>
* Copyright (C) 2002-2003 Matthew Wilcox <willy at parisc-linux.org>
* Copyright (C) 2002 Randolph Chung <tausq at parisc-linux.org>
* Copyright (C) 2002-2003 Helge Deller <deller with parisc-linux.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/config.h>
......
......@@ -261,11 +261,13 @@ pcxl_alloc_range(size_t size)
} else if(pages_needed <= 32) {
PCXL_FIND_FREE_MAPPING(res_idx, mask, 32);
} else {
panic(__FILE__ ": pcxl_alloc_range() Too many pages to map.\n");
panic("%s: pcxl_alloc_range() Too many pages to map.\n",
__FILE__);
}
dump_resmap();
panic(__FILE__ ": pcxl_alloc_range() out of dma mapping resources\n");
panic("%s: pcxl_alloc_range() out of dma mapping resources\n",
__FILE__);
resource_found:
......@@ -319,7 +321,8 @@ pcxl_free_range(unsigned long vaddr, size_t size)
} else if(pages_mapped <= 32) {
PCXL_FREE_MAPPINGS(res_idx, mask, 32);
} else {
panic(__FILE__ ": pcxl_free_range() Too many pages to unmap.\n");
panic("%s: pcxl_free_range() Too many pages to unmap.\n",
__FILE__);
}
pcxl_used_pages -= (pages_mapped ? pages_mapped : 1);
......
......@@ -229,7 +229,7 @@ void __devinit pcibios_resource_to_bus(struct pci_dev *dev,
struct pci_bus_region *region, struct resource *res)
{
struct pci_bus *bus = dev->bus;
struct pci_hba_data *hba = HBA_DATA(bus->dev->platform_data);
struct pci_hba_data *hba = HBA_DATA(bus->bridge->platform_data);
if (res->flags & IORESOURCE_IO) {
/*
......
/*
* arch/parisc/kernel/pdc_chassis.c
/*
* interfaces to log Chassis Codes via PDC (firmware)
*
* Copyright (C) 2002 Laurent Canet <canetl@esiee.fr>
* Copyright (C) 2002-2003 Thibaut Varene <varenet@esiee.fr>
* Copyright (C) 2002 Laurent Canet <canetl@esiee.fr>
* Copyright (C) 2002-2003 Thibaut Varene <varenet@esiee.fr>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#undef PDC_CHASSIS_DEBUG
......
/*
* linux/arch/parisc/kernel/pdc_console.c
/*
* PDC Console support - ie use firmware to dump text via boot console
*
* Copyright (C) 1999-2003 Matthew Wilcox <willy at parisc-linux.org>
* Copyright (C) 2000 Martin K Petersen <mkp at mkp.net>
* Copyright (C) 2000 John Marvin <jsm at parisc-linux.org>
* Copyright (C) 2000-2003 Paul Bame <bame at parisc-linux.org>
* Copyright (C) 2000 Philipp Rumpf <prumpf with tux.org>
* Copyright (C) 2000 Michael Ang <mang with subcarrier.org>
* Copyright (C) 2000 Grant Grundler <grundler with parisc-linux.org>
* Copyright (C) 2001-2002 Ryan Bradetich <rbrad at parisc-linux.org>
* Copyright (C) 2001 Helge Deller <deller at parisc-linux.org>
* Copyright (C) 2001 Thomas Bogendoerfer <tsbogend at parisc-linux.org>
* Copyright (C) 2002 Randolph Chung <tausq with parisc-linux.org>
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
* The PDC console is a simple console, which can be used for debugging
* boot related problems on HP PA-RISC machines.
*
......
;
; Purpose:
; This file has the overall purpose of suppyling low-level
; assembly to program the intrigue portion of the cpu.
;
/* low-level asm for "intrigue" (PA8500-8700 CPU perf counters)
*
* Copyright (C) 2001 Randolph Chung <tausq at parisc-linux.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/config.h>
#include <asm/assembly.h>
......
/*
* Imagine for use with the Onyx (PCX-U) CPU interface
*
* Copyright (C) 2001 Randolph Chung <tausq at parisc-linux.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef PERF_IMAGES_H
#define PERF_IMAGES_H
/* Magic numbers taken without modification from HPUX stuff */
/*
* Imagine for use with the Onyx cpu interface
*/
#define PCXU_IMAGE_SIZE 584
static uint32_t onyx_images[][PCXU_IMAGE_SIZE/sizeof(uint32_t)] = {
......
/*
* linux/arch/parisc/kernel/process.c
* based on the work for i386
*/
/*
* This file handles the architecture-dependent parts of process handling..
* PARISC Architecture-dependent parts of process handling
* based on the work for i386
*
* Copyright (C) 1999-2003 Matthew Wilcox <willy at parisc-linux.org>
* Copyright (C) 2000 Martin K Petersen <mkp at mkp.net>
* Copyright (C) 2000 John Marvin <jsm at parisc-linux.org>
* Copyright (C) 2000 David Huggins-Daines <dhd with pobox.org>
* Copyright (C) 2000-2003 Paul Bame <bame at parisc-linux.org>
* Copyright (C) 2000 Philipp Rumpf <prumpf with tux.org>
* Copyright (C) 2000 David Kennedy <dkennedy with linuxcare.com>
* Copyright (C) 2000 Richard Hirst <rhirst with parisc-lixux.org>
* Copyright (C) 2000 Grant Grundler <grundler with parisc-linux.org>
* Copyright (C) 2001 Alan Modra <amodra at parisc-linux.org>
* Copyright (C) 2001-2002 Ryan Bradetich <rbrad at parisc-linux.org>
* Copyright (C) 2001-2002 Helge Deller <deller at parisc-linux.org>
* Copyright (C) 2002 Randolph Chung <tausq with parisc-linux.org>
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#define __KERNEL_SYSCALLS__
......
......@@ -16,6 +16,7 @@
#include <linux/user.h>
#include <linux/personality.h>
#include <linux/security.h>
#include <linux/compat.h>
#include <asm/uaccess.h>
#include <asm/pgtable.h>
......@@ -36,8 +37,6 @@
#ifdef __LP64__
#define CHILD_IS_32BIT (child->personality == PER_LINUX_32BIT)
/* This function is needed to translate 32 bit pt_regs offsets in to
* 64 bit pt_regs offsets. For example, a 32 bit gdb under a 64 bit kernel
* will request offset 12 if it wants gr3, but the lower 32 bits of
......@@ -130,7 +129,7 @@ long sys_ptrace(long request, pid_t pid, long addr, long data)
int copied;
#ifdef __LP64__
if (CHILD_IS_32BIT) {
if (is_compat_task(child)) {
unsigned int tmp;
addr &= 0xffffffffL;
......@@ -162,7 +161,7 @@ long sys_ptrace(long request, pid_t pid, long addr, long data)
case PTRACE_POKEDATA:
ret = 0;
#ifdef __LP64__
if (CHILD_IS_32BIT) {
if (is_compat_task(child)) {
unsigned int tmp = (unsigned int)data;
DBG(("sys_ptrace(POKE%s, %d, %lx, %lx)\n",
request == PTRACE_POKETEXT ? "TEXT" : "DATA",
......@@ -185,7 +184,7 @@ long sys_ptrace(long request, pid_t pid, long addr, long data)
case PTRACE_PEEKUSR: {
ret = -EIO;
#ifdef __LP64__
if (CHILD_IS_32BIT) {
if (is_compat_task(child)) {
unsigned int tmp;
if (addr & (sizeof(int)-1))
......@@ -244,7 +243,7 @@ long sys_ptrace(long request, pid_t pid, long addr, long data)
goto out_tsk;
}
#ifdef __LP64__
if (CHILD_IS_32BIT) {
if (is_compat_task(child)) {
if (addr & (sizeof(int)-1))
goto out_tsk;
if ((addr = translate_usr_offset(addr)) < 0)
......
/* mostly borrowed from kernel/signal.c */
/* Signal support for 32-bit kernel builds
*
* Copyright (C) 2001 Matthew Wilcox <willy at parisc-linux.org>
* Code was mostly borrowed from kernel/signal.c.
* See kernel/signal.c for additional Copyrights.
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/config.h>
#include <linux/compat.h>
#include <linux/slab.h>
......
/*
* Copyright (C) 2001 Matthew Wilcox <willy at parisc-linux.org>
* Copyright (C) 2003 Carlos O'Donell <carlos at parisc-linux.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef _PARISC64_KERNEL_SIGNAL32_H
#define _PARISC64_KERNEL_SIGNAL32_H
......
/*
* Copyright (C) 2002 Richard Hirst <rhirst at parisc-linux.org>
* Copyright (C) 2003 James Bottomley <jejb at parisc-linux.org>
* Copyright (C) 2003 Randolph Chung <tausq with parisc-linux.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef _PARISC64_KERNEL_SYS32_H
#define _PARISC64_KERNEL_SYS32_H
......
/*
* linux/arch/parisc/kernel/sys_parisc.c
* PARISC specific syscalls
*
* Copyright (C) 1999-2003 Matthew Wilcox <willy at parisc-linux.org>
* Copyright (C) 2000-2003 Paul Bame <bame at parisc-linux.org>
* Copyright (C) 2001 Thomas Bogendoerfer <tsbogend at parisc-linux.org>
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* this implements syscalls which are handled per-arch.
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <asm/uaccess.h>
......
/* System Call Table
*
* Copyright (C) 1999-2003 Matthew Wilcox <willy at parisc-linux.org>
* Copyright (C) 2000-2001 John Marvin <jsm at parisc-linux.org>
* Copyright (C) 2000 Alan Modra <amodra at parisc-linux.org>
* Copyright (C) 2000-2003 Paul Bame <bame at parisc-linux.org>
* Copyright (C) 2000 Philipp Rumpf <prumpf with tux.org>
* Copyright (C) 2000 Michael Ang <mang with subcarrier.org>
* Copyright (C) 2000 David Huggins-Daines <dhd with pobox.org>
* Copyright (C) 2000 Grant Grundler <grundler at parisc-linux.org>
* Copyright (C) 2001 Richard Hirst <rhirst with parisc-linux.org>
* Copyright (C) 2001-2002 Ryan Bradetich <rbrad at parisc-linux.org>
* Copyright (C) 2001 Helge Deller <deller at parisc-linux.org>
* Copyright (C) 2000-2001 Thomas Bogendoerfer <tsbogend at parisc-linux.org>
* Copyright (C) 2002 Randolph Chung <tausq with parisc-linux.org>
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#undef ENTRY_SAME
#undef ENTRY_DIFF
#undef ENTRY_UHOH
......
......@@ -270,7 +270,7 @@ static int emulate_ldd(struct pt_regs *regs, int toreg, int flop)
}
#endif
DPRINTF("val = 0xllx\n", val);
DPRINTF("val = 0x%llx\n", val);
if (flop)
regs->fr[toreg] = val;
......
/* Kernel link layout for various "sections"
*
* Copyright (C) 1999-2003 Matthew Wilcox <willy at parisc-linux.org>
* Copyright (C) 2000-2003 Paul Bame <bame at parisc-linux.org>
* Copyright (C) 2000 John Marvin <jsm at parisc-linux.org>
* Copyright (C) 2000 Michael Ang <mang with subcarrier.org>
* Copyright (C) 2002 Randolph Chung <tausq with parisc-linux.org>
* Copyright (C) 2003 James Bottomley <jejb with parisc-linux.org>
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/config.h>
#include <asm-generic/vmlinux.lds.h>
/* needed for the processor specific cache alignment size */
#include <asm/cache.h>
/* ld script to make hppa Linux kernel */
#ifndef CONFIG_PARISC64
......@@ -22,7 +48,7 @@ SECTIONS
. = 0x10100000;
_text = .; /* Text and read-only data */
.text BLOCK(16) : {
.text ALIGN(16) : {
*(.text*)
*(.PARISC.unwind)
*(.fixup)
......@@ -32,18 +58,42 @@ SECTIONS
_etext = .; /* End of text section */
RODATA
/* writeable */
data_start = .;
. = ALIGN(16); /* Exception table */
__start___ex_table = .;
__ex_table : { *(__ex_table) }
__stop___ex_table = .;
RODATA
.data BLOCK(8192) : { /* Data without special */
data_start = .;
.data : { /* Data */
*(.data)
CONSTRUCTORS
}
. = ALIGN(4096);
/* nosave data is really only used for software suspend...it's here
* just in case we ever implement it */
__nosave_begin = .;
.data_nosave : { *(.data.nosave) }
. = ALIGN(4096);
__nosave_end = .;
. = ALIGN(L1_CACHE_BYTES);
.data.cacheline_aligned : { *(.data.cacheline_aligned) }
_edata = .; /* End of data section */
. = ALIGN(16384); /* init_task */
.data.init_task : { *(.data.init_task) }
/* The interrupt stack is currently partially coded, but not yet
* implemented */
. = ALIGN(16384);
init_istack : { *(init_istack) }
#ifdef CONFIG_PARISC64
. = ALIGN(16); /* Linkage tables */
.opd : { *(.opd) } PROVIDE (__gp = .);
......@@ -63,7 +113,7 @@ SECTIONS
__setup_start = .;
.init.setup : { *(.init.setup) }
__setup_end = .;
__start___param =.;
__start___param = .;
__param : { *(__param) }
__stop___param = .;
__initcall_start = .;
......@@ -81,6 +131,19 @@ SECTIONS
.con_initcall.init : { *(.con_initcall.init) }
__con_initcall_end = .;
SECURITY_INIT
/* alternate instruction replacement. This is a mechanism x86 uses
* to detect the CPU type and replace generic instruction sequences
* with CPU specific ones. We don't currently do this in PA, but
* it seems like a good idea... */
. = ALIGN(4);
__alt_instructions = .;
.altinstructions : { *(.altinstructions) }
__alt_instructions_end = .;
.altinstr_replacement : { *(.altinstr_replacement) }
/* .exit.text is discard at runtime, not link time, to deal with references
from .altinstructions and .eh_frame */
.exit.text : { *(.exit.text) }
.exit.data : { *(.exit.data) }
. = ALIGN(4096);
__initramfs_start = .;
.init.ramfs : { *(.init.ramfs) }
......@@ -91,17 +154,28 @@ SECTIONS
__per_cpu_end = .;
. = ALIGN(4096);
__init_end = .;
init_task BLOCK(16384) : { *(init_task) } /* The initial task and kernel stack */
_edata = .; /* End of data section */
.bss : { *(.bss) *(COMMON) } /* BSS */
/* freed after init ends here */
__bss_start = .; /* BSS */
.bss : { *(.bss) *(COMMON) }
__bss_stop = .;
_end = . ;
/* Sections to be discarded */
/DISCARD/ : {
*(.exitcall.exit)
#ifdef CONFIG_PARISC64
/* temporary hack until binutils is fixed to not emit these
for static binaries */
*(.interp)
*(.dynsym)
*(.dynstr)
*(.dynamic)
*(.hash)
#endif
}
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
......@@ -112,14 +186,4 @@ SECTIONS
.comment 0 : { *(.comment) }
.note 0 : { *(.note) }
#ifdef CONFIG_PARISC64
/* temporary hack until binutils is fixed to not emit these
for static binaries */
/DISCARD/ : {
*(.dynsym)
*(.dynstr)
*(.dynamic)
*(.hash)
}
#endif
}
/*
* Linux/PA-RISC Project (http://www.parisc-linux.org/)
* User Space Access Routines
*
* Copyright (C) 2000-2002 Hewlett-Packard (John Marvin)
* Copyright (C) 2000 Richard Hirst <rhirst with parisc-linux.org>
* Copyright (C) 2001 Matthieu Delahaye <delahaym at esiee.fr>
* Copyright (C) 2003 Randolph Chung <tausq with parisc-linux.org>
*
* Assembly Language User Access Routines
* Copyright (C) 2000 Hewlett-Packard (John Marvin)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
......@@ -16,7 +19,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
......
......@@ -16,7 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifdef __NO_PA_HDRS
......
......@@ -16,7 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifdef __NO_PA_HDRS
PA header file -- do not include this header file for non-PA builds.
......
......@@ -16,7 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
* BEGIN_DESC
......@@ -347,7 +347,7 @@ decode_fpu(unsigned int Fpu_register[], unsigned int trap_counts[])
return SIGNALCODE(SIGFPE, FPE_FLTRES);
default:
update_trap_counts(Fpu_register, aflags, bflags, trap_counts);
printk(__FILE__ "(%d) Unknown FPU exception 0x%x\n",
printk("%s(%d) Unknown FPU exception 0x%x\n", __FILE__,
__LINE__, Excp_type(exception_index));
return SIGNALCODE(SIGILL, ILL_COPROC);
case NOEXCEPTION: /* no exception */
......
......@@ -16,7 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
* BEGIN_DESC
......
......@@ -16,7 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
* BEGIN_DESC
......
......@@ -16,7 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
* BEGIN_DESC
......
......@@ -16,7 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
* BEGIN_DESC
......
......@@ -16,7 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
* BEGIN_DESC
......
......@@ -16,7 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
* BEGIN_DESC
......
......@@ -16,7 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
* BEGIN_DESC
......
......@@ -16,7 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
* BEGIN_DESC
......
......@@ -16,7 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
* linux/arch/math-emu/driver.c.c
......
......@@ -16,7 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
* BEGIN_DESC
......
......@@ -16,7 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
* BEGIN_DESC
......
......@@ -16,7 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
* BEGIN_DESC
......
......@@ -16,7 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
* BEGIN_DESC
......
......@@ -16,7 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
* BEGIN_DESC
......
......@@ -16,7 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
* BEGIN_DESC
......
......@@ -16,7 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
* BEGIN_DESC
......
......@@ -16,7 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
* BEGIN_DESC
......
......@@ -16,7 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
* BEGIN_DESC
......
......@@ -16,7 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifdef __NO_PA_HDRS
......
......@@ -16,7 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
* BEGIN_DESC
......
......@@ -16,7 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
* BEGIN_DESC
......
......@@ -16,7 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
* BEGIN_DESC
......
......@@ -16,7 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifdef __NO_PA_HDRS
......
......@@ -16,7 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef _PARISC_MATH_EMU_H
#define _PARISC_MATH_EMU_H
......
......@@ -16,7 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
* BEGIN_DESC
......
......@@ -16,7 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
* BEGIN_DESC
......
......@@ -16,7 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
* BEGIN_DESC
......
......@@ -16,7 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
* BEGIN_DESC
......
......@@ -16,7 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
* BEGIN_DESC
......
......@@ -16,7 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
* BEGIN_DESC
......
......@@ -16,7 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
* BEGIN_DESC
......
......@@ -16,7 +16,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifdef __NO_PA_HDRS
......
/*
* kmap/page table map and unmap support routines
*
* Copyright 1999,2000 Hewlett-Packard Company
* Copyright 2000 John Marvin <jsm at hp.com>
* Copyright 2000 Grant Grundler <grundler at parisc-linux.org>
* Copyright 2000 Philipp Rumpf <prumpf@tux.org>
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
** Stolen mostly from arch/parisc/kernel/pci-dma.c
*/
......
......@@ -7,7 +7,6 @@
#include <linux/config.h>
#ifndef __ASSEMBLY__
/*
* PA 2.0 processors have 64-byte cachelines; PA 1.1 processors have
* 32-byte cachelines. The default configuration is not for SMP anyway,
......@@ -24,13 +23,13 @@
#define L1_CACHE_SHIFT 5
#endif
#ifndef __ASSEMBLY__
#define L1_CACHE_ALIGN(x) (((x)+(L1_CACHE_BYTES-1))&~(L1_CACHE_BYTES-1))
#define SMP_CACHE_BYTES L1_CACHE_BYTES
#define L1_CACHE_SHIFT_MAX 5 /* largest L1 which this arch supports */
#define __cacheline_aligned __attribute__((__aligned__(L1_CACHE_BYTES)))
extern void flush_data_cache_local(void); /* flushes local data-cache only */
extern void flush_instruction_cache_local(void); /* flushes local code-cache only */
#ifdef CONFIG_SMP
......
......@@ -24,6 +24,7 @@ typedef u16 compat_nlink_t;
typedef u16 compat_ipc_pid_t;
typedef s32 compat_daddr_t;
typedef u32 compat_caddr_t;
typedef u32 compat_timer_t;
typedef s32 compat_int_t;
typedef s32 compat_long_t;
......@@ -101,6 +102,15 @@ struct compat_statfs {
s32 f_spare[5];
};
struct compat_sigcontext {
compat_int_t sc_flags;
compat_int_t sc_gr[32]; /* PSW in sc_gr[0] */
u64 sc_fr[32];
compat_int_t sc_iasq[2];
compat_int_t sc_iaoq[2];
compat_int_t sc_sar; /* cr11 */
};
#define COMPAT_RLIM_INFINITY 0xffffffff
typedef u32 compat_old_sigset_t; /* at least 32 bits */
......@@ -129,9 +139,7 @@ static inline void *compat_ptr(compat_uptr_t uptr)
static __inline__ void *compat_alloc_user_space(long len)
{
struct pt_regs *regs = &current->thread.regs;
unsigned long usp = regs->gr[30];
return (void *)(usp + len);
return (void *)regs->gr[30];
}
#endif /* _ASM_PARISC_COMPAT_H */
#include<linux/compat.h>
#include<linux/compat_siginfo.h>
#include<asm/compat_ucontext.h>
#ifndef _ASM_PARISC_COMPAT_RT_SIGFRAME_H
#define _ASM_PARISC_COMPAT_RT_SIGFRAME_H
/* In a deft move of uber-hackery, we decide to carry the top half of all
* 64-bit registers in a non-portable, non-ABI, hidden structure.
* Userspace can read the hidden structure if it *wants* but is never
* guaranteed to be in the same place. Infact the uc_sigmask from the
* ucontext_t structure may push the hidden register file downards
*/
struct compat_regfile {
/* Upper half of all the 64-bit registers that were truncated
on a copy to a 32-bit userspace */
compat_int_t rf_gr[32];
compat_int_t rf_iasq[2];
compat_int_t rf_iaoq[2];
compat_int_t rf_sar;
};
#define COMPAT_SIGRETURN_TRAMP 4
#define COMPAT_SIGRESTARTBLOCK_TRAMP 5
#define COMPAT_TRAMP_SIZE (COMPAT_SIGRETURN_TRAMP + COMPAT_SIGRESTARTBLOCK_TRAMP)
struct compat_rt_sigframe {
/* XXX: Must match trampoline size in arch/parisc/kernel/signal.c
Secondary to that it must protect the ERESTART_RESTARTBLOCK
trampoline we left on the stack (we were bad and didn't
change sp so we could run really fast.) */
compat_uint_t tramp[COMPAT_TRAMP_SIZE];
compat_siginfo_t info;
struct compat_ucontext uc;
/* Hidden location of truncated registers, *must* be last. */
struct compat_regfile regs;
};
/*
* The 32-bit ABI wants at least 48 bytes for a function call frame:
* 16 bytes for arg0-arg3, and 32 bytes for magic (the only part of
* which Linux/parisc uses is sp-20 for the saved return pointer...)
* Then, the stack pointer must be rounded to a cache line (64 bytes).
*/
#define SIGFRAME32 64
#define FUNCTIONCALLFRAME32 48
#define PARISC_RT_SIGFRAME_SIZE32 \
(((sizeof(struct compat_rt_sigframe) + FUNCTIONCALLFRAME32) + SIGFRAME32) & -SIGFRAME32)
#endif
/* Use generic */
#include <asm-generic/compat_signal.h>
#ifndef _ASM_PARISC_COMPAT_UCONTEXT_H
#define _ASM_PARISC_COMPAT_UCONTEXT_H
#include<linux/compat.h>
#include<asm/compat_signal.h>
/* 32-bit ucontext as seen from an 64-bit kernel */
struct compat_ucontext {
compat_uint_t uc_flags;
compat_uptr_t uc_link;
compat_stack_t uc_stack; /* struct compat_sigaltstack (12 bytes)*/
/* FIXME: Pad out to get uc_mcontext to start at an 8-byte aligned boundary */
compat_uint_t pad[1];
struct compat_sigcontext uc_mcontext;
compat_sigset_t uc_sigmask; /* mask last for extensibility */
};
#endif /* !_ASM_PARISC_COMPAT_UCONTEXT_H */
......@@ -29,7 +29,8 @@
#ifdef PCI_DEBUG
#define ASSERT(expr) \
if(!(expr)) { \
printk( "\n" __FILE__ ":%d: Assertion " #expr " failed!\n",__LINE__); \
printk("\n%s:%d: Assertion " #expr " failed!\n", \
__FILE__, __LINE__); \
panic(#expr); \
}
#else
......@@ -55,6 +56,12 @@ struct pci_hba_data {
struct resource io_space; /* PIOP */
struct resource lmmio_space; /* bus addresses < 4Gb */
struct resource elmmio_space; /* additional bus addresses < 4Gb */
struct resource gmmio_space; /* bus addresses > 4Gb */
/* NOTE: Dino code assumes it can use *all* of the lmmio_space,
* elmmio_space and gmmio_space as a contiguous array of
* resources. This #define represents the array size */
#define DINO_MAX_LMMIO_RESOURCES 3
unsigned long lmmio_space_offset; /* CPU view - PCI view */
void * iommu; /* IOMMU this device is under */
/* REVISIT - spinlock to protect resources? */
......
......@@ -478,7 +478,11 @@ extern int pdc_type;
#define PDC_TYPE_SYSTEM_MAP 1 /* 32-bit, but supports PDC_SYSTEM_MAP */
#define PDC_TYPE_SNAKE 2 /* Doesn't support SYSTEM_MAP */
#define is_pdc_pat() (pdc_type == PDC_TYPE_PAT)
#ifdef CONFIG_PARISC64
#define is_pdc_pat() (PDC_TYPE_PAT == pdc_type)
#else
#define is_pdc_pat() (0)
#endif
struct pdc_chassis_info { /* for PDC_CHASSIS_INFO */
unsigned long actcnt; /* actual number of bytes returned */
......
......@@ -29,7 +29,7 @@ typedef long __kernel_time_t;
typedef unsigned int __kernel_size_t;
typedef int __kernel_ssize_t;
typedef int __kernel_ptrdiff_t;
typedef int __kernel_time_t;
typedef long __kernel_time_t;
#endif
typedef char * __kernel_caddr_t;
......
#ifndef _ASM_PARISC_RT_SIGFRAME_H
#define _ASM_PARISC_RT_SIGFRAME_H
#ifdef CONFIG_COMPAT
#include <asm/compat_rt_sigframe.h>
#endif
#define SIGRETURN_TRAMP 4
#define SIGRESTARTBLOCK_TRAMP 5
#define TRAMP_SIZE (SIGRETURN_TRAMP + SIGRESTARTBLOCK_TRAMP)
struct rt_sigframe {
unsigned int tramp[4];
/* XXX: Must match trampoline size in arch/parisc/kernel/signal.c
Secondary to that it must protect the ERESTART_RESTARTBLOCK
trampoline we left on the stack (we were bad and didn't
change sp so we could run really fast.) */
unsigned int tramp[TRAMP_SIZE];
struct siginfo info;
struct ucontext uc;
};
/*
* The 32-bit ABI wants at least 48 bytes for a function call frame:
* 16 bytes for arg0-arg3, and 32 bytes for magic (the only part of
* which Linux/parisc uses is sp-20 for the saved return pointer...)
* Then, the stack pointer must be rounded to a cache line (64 bytes).
*/
#define SIGFRAME32 64
#define FUNCTIONCALLFRAME32 48
#define PARISC_RT_SIGFRAME_SIZE32 \
(((sizeof(struct rt_sigframe) + FUNCTIONCALLFRAME32) + SIGFRAME32) & -SIGFRAME32)
#ifdef __LP64__
#define SIGFRAME 128
#define FUNCTIONCALLFRAME 96
#define PARISC_RT_SIGFRAME_SIZE \
(((sizeof(struct rt_sigframe) + FUNCTIONCALLFRAME) + SIGFRAME) & -SIGFRAME)
#else
#define SIGFRAME SIGFRAME32
#define FUNCTIONCALLFRAME FUNCTIONCALLFRAME32
#define PARISC_RT_SIGFRAME_SIZE PARISC_RT_SIGFRAME_SIZE32
#endif
#endif
#ifndef _PARISC_SIGINFO_H
#define _PARISC_SIGINFO_H
#define HAVE_ARCH_COPY_SIGINFO_TO_USER
#include <asm-generic/siginfo.h>
/*
......
#ifndef _PARISC_SUPERIO_H
#define _PARISC_SUPERIO_H
/* Offsets to configuration and base address registers */
#define IC_PIC1 0x20 /* PCI I/O address of master 8259 */
#define IC_PIC2 0xA0 /* PCI I/O address of slave */
/* Config Space Offsets to configuration and base address registers */
#define SIO_CR 0x5A /* Configuration Register */
#define SIO_ACPIBAR 0x88 /* ACPI BAR */
#define SIO_ACPIBAR 0x88 /* ACPI BAR */
#define SIO_FDCBAR 0x90 /* Floppy Disk Controller BAR */
#define SIO_SP1BAR 0x94 /* Serial 1 BAR */
#define SIO_SP2BAR 0x98 /* Serial 2 BAR */
#define SIO_PPBAR 0x9C /* Parallel BAR */
/* Interrupt triggers and routing */
#define TRIGGER_1 0x67 /* Edge/level trigger register 1 */
#define TRIGGER_2 0x68 /* Edge/level trigger register 2 */
#define IR_SER 0x69 /* Serial 1 [0:3] and Serial 2 [4:7] */
#define IR_PFD 0x6a /* Parallel [0:3] and Floppy [4:7] */
#define IR_IDE 0x6b /* IDE1 [0:3] and IDE2 [4:7] */
#define IR_USB 0x6d /* USB [4:7] */
#define IR_LOW 0x69 /* Lowest interrupt routing reg */
#define IR_HIGH 0x71 /* Highest interrupt routing reg */
/* Interrupt Routing Control registers */
#define CFG_IR_SER 0x69 /* Serial 1 [0:3] and Serial 2 [4:7] */
#define CFG_IR_PFD 0x6a /* Parallel [0:3] and Floppy [4:7] */
#define CFG_IR_IDE 0x6b /* IDE1 [0:3] and IDE2 [4:7] */
#define CFG_IR_INTAB 0x6c /* PCI INTA [0:3] and INT B [4:7] */
#define CFG_IR_INTCD 0x6d /* PCI INTC [0:3] and INT D [4:7] */
#define CFG_IR_PS2 0x6e /* PS/2 KBINT [0:3] and Mouse [4:7] */
#define CFG_IR_FXBUS 0x6f /* FXIRQ[0] [0:3] and FXIRQ[1] [4:7] */
#define CFG_IR_USB 0x70 /* FXIRQ[2] [0:3] and USB [4:7] */
#define CFG_IR_ACPI 0x71 /* ACPI SCI [0:3] and reserved [4:7] */
#define CFG_IR_LOW CFG_IR_SER /* Lowest interrupt routing reg */
#define CFG_IR_HIGH CFG_IR_ACPI /* Highest interrupt routing reg */
/* 8259 operational control words */
#define OCW2_EOI 0x20 /* Non-specific EOI */
......@@ -42,15 +50,15 @@
#define SUPERIO_NIRQS 8
struct superio_device {
u16 fdc_base;
u16 sp1_base;
u16 sp2_base;
u16 pp_base;
u16 acpi_base;
int iosapic_irq;
int iosapic_irq_enabled;
u32 fdc_base;
u32 sp1_base;
u32 sp2_base;
u32 pp_base;
u32 acpi_base;
int suckyio_irq_enabled;
struct irq_region *irq_region;
struct pci_dev *lio_pdev; /* pci device for legacy IO fn */
struct pci_dev *lio_pdev; /* pci device for legacy IO (fn 1) */
struct pci_dev *usb_pdev; /* pci device for USB (fn 2) */
};
/*
......
......@@ -62,7 +62,7 @@ extern int __put_user_bad(void);
*/
struct exception_table_entry {
unsigned long addr; /* address of insn that is allowed to fault. */
unsigned long insn; /* address of insn that is allowed to fault. */
long skip; /* pcoq skip | r9 clear flag | r8 -EFAULT flag */
};
......@@ -98,7 +98,7 @@ struct exception_table_entry {
#define __get_kernel_asm(ldx,ptr) \
__asm__("\n1:\t" ldx "\t0(%2),%0\n" \
"2:\n" \
"\t.section __ex_table,\"a\"\n" \
"\t.section __ex_table,\"aw\"\n" \
"\t.dword\t1b\n" \
"\t.dword\t(2b-1b)+3\n" \
"\t.previous" \
......@@ -108,7 +108,7 @@ struct exception_table_entry {
#define __get_user_asm(ldx,ptr) \
__asm__("\n1:\t" ldx "\t0(%%sr3,%2),%0\n" \
"2:\n" \
"\t.section __ex_table,\"a\"\n" \
"\t.section __ex_table,\"aw\"\n" \
"\t.dword\t1b\n" \
"\t.dword\t(2b-1b)+3\n" \
"\t.previous" \
......@@ -118,7 +118,7 @@ struct exception_table_entry {
#define __get_kernel_asm(ldx,ptr) \
__asm__("\n1:\t" ldx "\t0(%2),%0\n" \
"2:\n" \
"\t.section __ex_table,\"a\"\n" \
"\t.section __ex_table,\"aw\"\n" \
"\t.word\t1b\n" \
"\t.word\t(2b-1b)+3\n" \
"\t.previous" \
......@@ -128,13 +128,13 @@ struct exception_table_entry {
#define __get_user_asm(ldx,ptr) \
__asm__("\n1:\t" ldx "\t0(%%sr3,%2),%0\n" \
"2:\n" \
"\t.section __ex_table,\"a\"\n" \
"\t.section __ex_table,\"aw\"\n" \
"\t.word\t1b\n" \
"\t.word\t(2b-1b)+3\n" \
"\t.previous" \
: "=r"(__gu_val), "=r"(__gu_err) \
: "r"(ptr), "1"(__gu_err));
#endif
#endif /* !__LP64__ */
#define __put_user(x,ptr) \
({ \
......@@ -173,7 +173,7 @@ struct exception_table_entry {
__asm__ __volatile__ ( \
"\n1:\t" stx "\t%2,0(%1)\n" \
"2:\n" \
"\t.section __ex_table,\"a\"\n" \
"\t.section __ex_table,\"aw\"\n" \
"\t.dword\t1b\n" \
"\t.dword\t(2b-1b)+1\n" \
"\t.previous" \
......@@ -184,7 +184,7 @@ struct exception_table_entry {
__asm__ __volatile__ ( \
"\n1:\t" stx "\t%2,0(%%sr3,%1)\n" \
"2:\n" \
"\t.section __ex_table,\"a\"\n" \
"\t.section __ex_table,\"aw\"\n" \
"\t.dword\t1b\n" \
"\t.dword\t(2b-1b)+1\n" \
"\t.previous" \
......@@ -195,7 +195,7 @@ struct exception_table_entry {
__asm__ __volatile__ ( \
"\n1:\t" stx "\t%2,0(%1)\n" \
"2:\n" \
"\t.section __ex_table,\"a\"\n" \
"\t.section __ex_table,\"aw\"\n" \
"\t.word\t1b\n" \
"\t.word\t(2b-1b)+1\n" \
"\t.previous" \
......@@ -206,7 +206,7 @@ struct exception_table_entry {
__asm__ __volatile__ ( \
"\n1:\t" stx "\t%2,0(%%sr3,%1)\n" \
"2:\n" \
"\t.section __ex_table,\"a\"\n" \
"\t.section __ex_table,\"aw\"\n" \
"\t.word\t1b\n" \
"\t.word\t(2b-1b)+1\n" \
"\t.previous" \
......@@ -221,7 +221,7 @@ static inline void __put_kernel_asm64(u64 x, void *ptr)
"\n1:\tstw %1,0(%0)\n"
"\n2:\tstw %2,4(%0)\n"
"3:\n"
"\t.section __ex_table,\"a\"\n"
"\t.section __ex_table,\"aw\"\n"
"\t.word\t1b\n"
"\t.word\t(3b-1b)+1\n"
"\t.word\t2b\n"
......@@ -239,7 +239,7 @@ static inline void __put_user_asm64(u64 x, void *ptr)
"\n1:\tstw %1,0(%%sr3,%0)\n"
"\n2:\tstw %2,4(%%sr3,%0)\n"
"3:\n"
"\t.section __ex_table,\"a\"\n"
"\t.section __ex_table,\"aw\"\n"
"\t.word\t1b\n"
"\t.word\t(3b-1b)+1\n"
"\t.word\t2b\n"
......@@ -249,7 +249,7 @@ static inline void __put_user_asm64(u64 x, void *ptr)
}
#endif
#endif /* !__LP64__ */
/*
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment