ath9k: Add support for newer AR9285 chipsets.

This patch adds support for a modified newer version of AR9285
chipsets.
Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/ath/ath9k/calib.c

@@ -18,6 +18,7 @@
 
 /* We can tune this as we go by monitoring really low values */
 #define ATH9K_NF_TOO_LOW	-60
+#define AR9285_CLCAL_REDO_THRESH    1
 
 /* AR5416 may return very high value (like -31 dBm), in those cases the nf
  * is incorrect and we should use the static NF value. Later we can try to
@@ -1091,7 +1092,7 @@ bool ath9k_hw_calibrate(struct ath_hw *ah, struct ath9k_channel *chan,
 EXPORT_SYMBOL(ath9k_hw_calibrate);
 
 /* Carrier leakage Calibration fix */
-static bool ar9285_clc(struct ath_hw *ah, struct ath9k_channel *chan)
+static bool ar9285_cl_cal(struct ath_hw *ah, struct ath9k_channel *chan)
 {
 	struct ath_common *common = ath9k_hw_common(ah);
 
@@ -1132,6 +1133,62 @@ static bool ar9285_clc(struct ath_hw *ah, struct ath9k_channel *chan)
 	return true;
 }
 
+static bool ar9285_clc(struct ath_hw *ah, struct ath9k_channel *chan)
+{
+	int i;
+	u_int32_t txgain_max;
+	u_int32_t clc_gain, gain_mask = 0, clc_num = 0;
+	u_int32_t reg_clc_I0, reg_clc_Q0;
+	u_int32_t i0_num = 0;
+	u_int32_t q0_num = 0;
+	u_int32_t total_num = 0;
+	u_int32_t reg_rf2g5_org;
+	bool retv = true;
+
+	if (!(ar9285_cl_cal(ah, chan)))
+		return false;
+
+	txgain_max = MS(REG_READ(ah, AR_PHY_TX_PWRCTRL7),
+			AR_PHY_TX_PWRCTRL_TX_GAIN_TAB_MAX);
+
+	for (i = 0; i < (txgain_max+1); i++) {
+		clc_gain = (REG_READ(ah, (AR_PHY_TX_GAIN_TBL1+(i<<2))) &
+			   AR_PHY_TX_GAIN_CLC) >> AR_PHY_TX_GAIN_CLC_S;
+		if (!(gain_mask & (1 << clc_gain))) {
+			gain_mask |= (1 << clc_gain);
+			clc_num++;
+		}
+	}
+
+	for (i = 0; i < clc_num; i++) {
+		reg_clc_I0 = (REG_READ(ah, (AR_PHY_CLC_TBL1 + (i << 2)))
+			      & AR_PHY_CLC_I0) >> AR_PHY_CLC_I0_S;
+		reg_clc_Q0 = (REG_READ(ah, (AR_PHY_CLC_TBL1 + (i << 2)))
+			      & AR_PHY_CLC_Q0) >> AR_PHY_CLC_Q0_S;
+		if (reg_clc_I0 == 0)
+			i0_num++;
+
+		if (reg_clc_Q0 == 0)
+			q0_num++;
+	}
+	total_num = i0_num + q0_num;
+	if (total_num > AR9285_CLCAL_REDO_THRESH) {
+		reg_rf2g5_org = REG_READ(ah, AR9285_RF2G5);
+		if (AR_SREV_9285E_20(ah)) {
+			REG_WRITE(ah, AR9285_RF2G5,
+				  (reg_rf2g5_org & AR9285_RF2G5_IC50TX) |
+				  AR9285_RF2G5_IC50TX_XE_SET);
+		} else {
+			REG_WRITE(ah, AR9285_RF2G5,
+				  (reg_rf2g5_org & AR9285_RF2G5_IC50TX) |
+				  AR9285_RF2G5_IC50TX_SET);
+		}
+		retv = ar9285_cl_cal(ah, chan);
+		REG_WRITE(ah, AR9285_RF2G5, reg_rf2g5_org);
+	}
+	return retv;
+}
+
 bool ath9k_hw_init_cal(struct ath_hw *ah, struct ath9k_channel *chan)
 {
 	struct ath_common *common = ath9k_hw_common(ah);

drivers/net/wireless/ath/ath9k/hw.c

@@ -815,15 +815,30 @@ static void ath9k_hw_init_mode_gain_regs(struct ath_hw *ah)
 
 		/* txgain table */
 		if (txgain_type == AR5416_EEP_TXGAIN_HIGH_POWER) {
+			if (AR_SREV_9285E_20(ah)) {
+				INIT_INI_ARRAY(&ah->iniModesTxGain,
+				ar9285Modes_XE2_0_high_power,
+				ARRAY_SIZE(
+				  ar9285Modes_XE2_0_high_power), 6);
+			} else {
 				INIT_INI_ARRAY(&ah->iniModesTxGain,
 				ar9285Modes_high_power_tx_gain_9285_1_2,
-			ARRAY_SIZE(ar9285Modes_high_power_tx_gain_9285_1_2), 6);
+				ARRAY_SIZE(
+				  ar9285Modes_high_power_tx_gain_9285_1_2), 6);
+			}
+		} else {
+			if (AR_SREV_9285E_20(ah)) {
+				INIT_INI_ARRAY(&ah->iniModesTxGain,
+				ar9285Modes_XE2_0_normal_power,
+				ARRAY_SIZE(
+				  ar9285Modes_XE2_0_normal_power), 6);
 			} else {
 				INIT_INI_ARRAY(&ah->iniModesTxGain,
 				ar9285Modes_original_tx_gain_9285_1_2,
-			ARRAY_SIZE(ar9285Modes_original_tx_gain_9285_1_2), 6);
+				ARRAY_SIZE(
+				  ar9285Modes_original_tx_gain_9285_1_2), 6);
+			}
 		}
-
 	}
 }
 

drivers/net/wireless/ath/ath9k/phy.h

@@ -503,6 +503,8 @@ bool ath9k_hw_set_rf_regs(struct ath_hw *ah,
 #define AR_PHY_TX_PWRCTRL_ERR_EST_MODE_S   24
 
 #define AR_PHY_TX_PWRCTRL7       0xa274
+#define AR_PHY_TX_PWRCTRL_TX_GAIN_TAB_MAX   0x0007E000
+#define AR_PHY_TX_PWRCTRL_TX_GAIN_TAB_MAX_S 13
 #define AR_PHY_TX_PWRCTRL_INIT_TX_GAIN     0x01F80000
 #define AR_PHY_TX_PWRCTRL_INIT_TX_GAIN_S   19
 
@@ -513,9 +515,17 @@ bool ath9k_hw_set_rf_regs(struct ath_hw *ah,
 #define AR_PHY_TX_PWRCTRL9_RES_DC_REMOVAL_S 31
 
 #define AR_PHY_TX_GAIN_TBL1      0xa300
+#define AR_PHY_TX_GAIN_CLC       0x0000001E
+#define AR_PHY_TX_GAIN_CLC_S     1
 #define AR_PHY_TX_GAIN           0x0007F000
 #define AR_PHY_TX_GAIN_S         12
 
+#define AR_PHY_CLC_TBL1      0xa35c
+#define AR_PHY_CLC_I0        0x07ff0000
+#define AR_PHY_CLC_I0_S      16
+#define AR_PHY_CLC_Q0        0x0000ffd0
+#define AR_PHY_CLC_Q0_S      5
+
 #define AR_PHY_CH0_TX_PWRCTRL11  0xa398
 #define AR_PHY_CH1_TX_PWRCTRL11  0xb398
 #define AR_PHY_TX_PWRCTRL_OLPC_TEMP_COMP   0x0000FC00

drivers/net/wireless/ath/ath9k/reg.h

@@ -679,7 +679,7 @@
 
 #define AR_WA                		0x4004
 #define AR_WA_D3_L1_DISABLE		(1 << 14)
-#define AR9285_WA_DEFAULT 		0x004a05cb
+#define AR9285_WA_DEFAULT		0x004a050b
 #define AR9280_WA_DEFAULT           	0x0040073b
 #define AR_WA_DEFAULT               	0x0000073f
 
@@ -845,6 +845,10 @@
     (AR_SREV_9271(_ah) && \
      ((_ah)->hw_version.macRev == AR_SREV_REVISION_9271_11))
 
+#define AR_SREV_9285E_20(_ah) \
+    (AR_SREV_9285_12_OR_LATER(_ah) && \
+     ((REG_READ(_ah, AR_AN_SYNTH9) & 0x7) == 0x1))
+
 #define AR_RADIO_SREV_MAJOR                   0xf0
 #define AR_RAD5133_SREV_MAJOR                 0xc0
 #define AR_RAD2133_SREV_MAJOR                 0xd0
@@ -1181,6 +1185,13 @@ enum {
 #define AR9285_AN_RF2G4_DB2_4    0x00003800
 #define AR9285_AN_RF2G4_DB2_4_S    11
 
+#define AR9285_RF2G5			0x7830
+#define AR9285_RF2G5_IC50TX		0xfffff8ff
+#define AR9285_RF2G5_IC50TX_SET		0x00000400
+#define AR9285_RF2G5_IC50TX_XE_SET	0x00000500
+#define AR9285_RF2G5_IC50TX_CLEAR	0x00000700
+#define AR9285_RF2G5_IC50TX_CLEAR_S	8
+
 /* AR9271 : 0x7828, 0x782c different setting from AR9285 */
 #define AR9271_AN_RF2G3_OB_cck		0x001C0000
 #define AR9271_AN_RF2G3_OB_cck_S	18